126

Reading the partstable for sleeve style springs

1 2 3 4 5 6 7

1. ApplicationsIn this section, we provide all the information that is known aboutthis specific application (i.e., model number, years of manufacture,part numbers, Firestone reference numbers and competitornumbers if known).

2. Order NumberThis number identifies the specific assembly order number thatneeds to be used for ordering purposes. It is important that thecomplete order number is used to avoid any confusion, especiallywith any type of electronic ordering. The complete order number inthe example is W02-358-7017.

3. Cross Section ViewThis section is a cross sectionaldrawing of the Airide spring showingdimensional information in inches.The two heights shown to the right ofthe drawing are for extended andcompressed measurementsuninflated. The part number shown at the left is the last four digits of the A.O.N. (Airide Order Number). In the example,W02-358-7017 is abbreviated to “7017”. The last 7 digits of theA.O.N. are stamped into the lip of the cap, around the perimeter.

The AON number may also be stamped on the crimping.

4. Cap Drawing NumberShown in this section of the tableabove is the drawing number moldedinto the material of most caps,followed by an additional four digitnumber enclosed in parentheses. Thedrawing numbers will generally startwith the letters NBD. The four digitnumber is a stores number for thiscomponent, not an assembly identification number. In this book you will see another notation following the four digitnumber. This refers to the material that the cap is made of,specifically aluminum or plastic.

5. Piston Drawing NumberThis section refers to the piston endof the sleeve. It is shown in thesame way as the cap information.

6. BCR/Logo ColorThis dimension is the measurementtaken between the two metal ringson each end of the assembly. Note: BCR measurement on a used Airide spring will be somewhatshorter than specified in this catalog.The Airide™ spring shield logo colorindicates a very specific constructionof the bellows.

7. WeightThis is the total weight of the Airidespring assembly.

NBD-10010(7007)

BCR

LogoColor

Cap Drawing Number

358-7017

NBD-10010

(7007)

A.O.N.Number

CROSS SECTION VIEWCAP

DRAWINGNUMBER

PISTONDRAWINGNUMBER

BCR/LOGO

COLORAPPLICATIONS WEIGHTORDER NUMBER

(W02-358)

11.5"/Maroon

7023 (AL)NBD-10071

7007 (AL)NBD-1001015.03

3.89

1/2-13 x.80 DEEP

2.84 DIA.

.62

1/8 NPTF

3/4-16

2.13 DIA.

3.38

5.0 INF.2.9 UNINF.

7017227QS38

MACK

127

Slee

ve S

tyle

Spr

ings

The components of sleeve style springs

1. Combo StudCombination mounting stud and air fitting.

2. Blind NutA blind tapped hole in either the piston or cap.

3. Air Fitting HoleWhen using a blind nut or stud instead of a combo stud,a separate air fitting is required.

4. Clamp PlateAlso called the “Cap”, this is the upper aluminum orplastic end. This provides the mounting hardware, andnormally the air fitting.

5. BellowsThe heart of an Airide spring is the sleeve, or bellows. It is made of four layers: an inner liner of rubber, twoplies of cord reinforcement, and an outer cover.

6. PistonThe lower end of the assembly that the rubber rolls overis called the “piston”. This is also made of eitheraluminum or plastic. It provides the lower mountinghardware for the assembly.

7. Clamp RingThese are the metal rings used to permanently attachthe bellows to the clamp plate and piston.

1

4

2

2

4 3

5

6

5

7

7

7

6

2

7

128

ASSEMBLYORDER NO. CROSS SECTION VIEW

CAPDRAWING

NO.

PISTONDRAWING

NO.

BCRLOGO

COLORWEIGHT APPLICATIONS

INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available

W02-358-7079

3/8-16x .65 DEEP

(TH’D)

2.84 DIA.

1.70

1/8 NPTF

1.48

8.002.40

.75

2.90

2.9 UNINF.

.88

7074NBD-11636

7083NBD-13727

6”Orange 0.7 LINK MANUFACTURING LTD

1102-0026 (Nav.)

W02-358-7046

.65 DEEP(TH’D)

2.84 DIA.3/8-16x

3/8-16x

.54 DEEP

2.90 DIA.

1/8 NPTAIR INLET.75

1.48

7.792.40

2.9 UNINF.

.88

7068NBD-10470

7083NBD-13727

6”Orange 0.7 LINK MANUFACTURING LTD

1102-0022 (Ford, Frt. GMC, Pete)

W02-358-7086

3/8-16x .50 DEEP

2.88 DIA.

7.252.40

1/8 NPTF

2.84 DIA.

3/4-16 .62

1.48

2.9 UNINF.

7018NBD-10218

7052NBD-10552

5.25”Orange 0.7 LINK MANUFACTURING LTD

1102-0025 (Ford)

W01-358-7025

5.8 UNINF.

3.0MIN. HT.

1.75

1.75

1/4 NPTF

3/8-16 x .62 DEEP

4.50

3030 3025 3.8 FREIGHTLINER / WESTERN STAR(style #25 bellows)

Slee

ve S

tyle

Par

ts

Sleeve Style Parts

129

ASSEMBLYORDER NO. CROSS SECTION VIEW

CAPDRAWING

NO.

PISTONDRAWING

NO.

BCRLOGO

COLORWEIGHT APPLICATIONS

INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available

W02-358-6754

3/8-16 x.50 DEEP

2.90 DIA.

9.502.50

1/8 NPTF

2.84 DIA.

3/4-16x 1.00

TH’D MIN.1.25

1.48

2.90 UNINF .

NYLONWASHER

NYLONNUT

7014NBD-10082

6996NBD-13499

7.50”Orange 1.0

PETERBILT20-16754Day Cab (1994 & later)Dynacraft D5000-2250

W02-358-7201

1/8 NPTF

3/4-16 UNFNYLONJAM NUT

3/8-16 UNC x.50 DEEP

2.9 UNINF.

8.253.50

1.48

2.88.62

2.84

7018NBD-10218

7052NBD-10552

7.25”Orange 1.2

FREIGHTLINER / STERLING18-45068-000 Sterling Day CabOld Ford # P/N F6HT5C06CABHN-80 Day Cab (1996 & later)

W02-358-7150

3/8-16 UNC x.88 DEEP

3/4-16 UNF

1/8 NPTF2.9 UNINF.

8.002.20

2.90

1.48

2.84

7015NBD-10239

7083NBD-13727

7.00”Orange 0.7 SEARS/DURAFORM

S13384 (W02-811-7150)

W02-358-7001

3/8-16 x.50 DEEP

2.88 DIA.1/8 NPTF

2.84 DIA.

3/4-16 .62

1.48

8.462.40

2.9 UNINF .

7018NBD-10218

7052NBD-10552

6.75”Orange 0.7

LINK MANUFACTURING LTD1102-0020 (NAV.) see 1102-00231102-0023 (Ford, Frt, GMC, KW, Nav.,Volvo)

COMFORT RIDE

WISE

130

ASSEMBLYORDER NO. CROSS SECTION VIEW

CAPDRAWING

NO.

PISTONDRAWING

NO.

BCRLOGO

COLORWEIGHT APPLICATIONS

INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available

W02-358-7059

3.20 DIA.

3.13

11.703.66

.52

.741/8 NPT

2.84 DIA.2.9 UNINF.

.50.50

7042NBD-10409

6896NBD-12708

8.25”Orange 1.3

NATIONAL SEATING324663-01 (W02-N19-7059)328035-01 (W02-N19-7069)329666-01 (W02-N19-7084)

W02-358-7041

11.814.01

1/2-13THREADED

HOLE(.87 DEEP)

2.84 DIA.2.9 UNINF.

.62

1/8 NPTAIR INLET

3/4-16

2.12 DIA.

3.51

7015NBD-10239

7033NBD-10238

8.25”Orange 1.2 SEARS / DURAFORM

S8645 (W02-811-7041)

W02-358-7155

3/4-16 UNFNYLON NUT

1/8 NPT

2.9 UNINF.3.09

.65

8.502.20

1.48

2.90

1.25

6991NBD-14314

6996NBD-13499

7.50”Orange 1.0

PETERBILT20-19036Uni-Built HighwayFront Support SpringDynacraft D5000-2253

W02-358-7100

3/8-16x .65 DEEP

(TH’D)

2.84 DIA.2.9 UNINF.

2.90 DIA.

1/8 NPTAIR INLET.75

1.48

9.502.40

.88

3/8-16x .54 DEEP

7068NBD-10470

7083NBD-13727

7.50”Orange 0.7 3-T’S

W02-T03-7100

Slee

ve S

tyle

Par

ts

Sleeve Style Parts

131

ASSEMBLYORDER NO. CROSS SECTION VIEW

CAPDRAWING

NO.

PISTONDRAWING

NO.

BCRLOGO

COLORWEIGHT APPLICATIONS

INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available

W02-358-7098

2.84 DIA.

2.10 DIA.

3.51

.50

.751/8 NPTF

.50

13.404.00

2.90 UNINF.

3/4-16

6997NBD-13262

7041NBD-10215

9.62”Orange 1.2 LINK MANUFACTURING LTD

1102-0027

W02-358-7054

2.84 DIA.

2.11 DIA.

3.51

.75

1/8 NPTF

3/4-16

13.294.04

3/8-16x .50 DEEP

2.9 UNINF.

7018NBD-10218

7041NBD-10215

9.25”Orange 1.2 WISE

W21-760-7076

3/8-16x .50 DEEP(TH’D)

2.90 DIA.

1.48

11.252.40

2.84 DIA.

.633/4-16

1/8 NPTF2.9 UNINF.

.75

7007NBD-10010

7054NBD-10795

9.25”Orange 0.8 RIDE-RITE

W02-358-7058

3.20 DIA.

3.13

12.293.66

.52.74

1/8 NPT

2.84 DIA..50

.50

2.9 UNINF.

7042NBD-10409

6896NBD-12708

9.00”Orange 1.3 NATIONAL SEATING

324662-01 (W02-N19-7058)

132

ASSEMBLYORDER NO. CROSS SECTION VIEW

CAPDRAWING

NO.

PISTONDRAWING

NO.

BCRLOGO

COLORWEIGHT APPLICATIONS

INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available

W02-358-7149

2.84 DIA.3/8-16x

.54 DEEP

3.20 DIA.

1/8 NPTAIR INLET

3.13

.75

13.633.66

.52.74

1/8 NPT

2.9 UNINF.

7068NBD-10470

6896NBD-12708

10.00”Orange 1.3 3-T’S

W02-T03-7149

W02-358-7055

2.84 DIA.

2.11 DIA.

3.51

.50

.501/8 NPTAIR INLET

.50

13.704.04

2.9 UNINF.

7042NBD-10409

7047NBD-10526

10.00”Orange 1.2

NATIONAL SEATING21122837050 Plastic (use 7055)

W02-358-7049

1/2-13x .87 DEEP

2.84 DIA.

2.11 DIA.

1/8 NPTAIR INLET

3.51

.75

13.863.89

2.9 UNINF.

3/8-16x .54 DEEP

7068NBD-10470

7033NBD-10238

10.00”Orange 1.2 3-T’S

W02-T03-7049

W02-358-7040 13.56

4.04

1/2-13x .87 DEEP

2.84 DIA.

.62

1/8 NPTAIR INLET

3/4-16

2.12 DIA.

3.51

2.9 UNINF.

7015NBD-10239

7033NBD-10238

10.00”Orange 1.2

KNOEDLER7010 AL (use 7040) (W02-K50-7060)

SEARS / DURAFORMS5388

SEATS707338

AIR FLEX

Slee

ve S

tyle

Par

ts

Sleeve Style Parts

133

ASSEMBLYORDER NO. CROSS SECTION VIEW

CAPDRAWING

NO.

PISTONDRAWING

NO.

BCRLOGO

COLORWEIGHT APPLICATIONS

INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available

W02-358-7209

.75

.50

8.002.20

.53

1.48

.50

2.9 UNINF.

7042NBD-10409

6979FIP-100105

7.00”Green 1.3

SEATS708220(W02-812-7209)

W02-358-7031

3/8-16x .50 DEEP

2.88 DIA.1/8 NPT

AIR INLET

2.84 DIA.

3/4-16 .62

1.48

8.622.40

2.9 UNINF.

7014NBD-10082

7049NBD-10549

7.00”Green 1.3

MACK227QS33GY 1S4-007

W02-358-9901

23.437.05

5.46 DIA.

1.00

1/8 NPTF

3/4-16

5.10 DIA.

5.80

1.75

5.0 UNINF.

.50 DIA.x 1.0 DEEP

7066NAD-25400

7059NBD-11340

16.37”Orange 3.9

PETERBILT02-02031Front Axle Air Spring (production-1989 to1992)

W02-358-7073

1/2-13x .87 DEEP

2.84 DIA.3/8-16x .54 DEEP

2.12 DIA.

1/8 NPTAIR INLET.75

3.40

14.903.89

2.9 UNINF.

7013NBD-10183

7023NBD-10071

11.00”Orange 1.4 CARE CONCEPT

134

ASSEMBLYORDER NO. CROSS SECTION VIEW

CAPDRAWING

NO.

PISTONDRAWING

NO.

BCRLOGO

COLORWEIGHT APPLICATIONS

INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available

W02-358-7204

NYLONJAM NUT

3/4-16 UNF1/8 NPT

2.9 UNINF.

3.09

.60

9.004.70

1.48

2.90.62

6990NBD-13706

7052NBD-10552

8.00”Red 1.4

FREIGHTLINER / STERLINGSterling Actera18-43472-000

W02-358-7007

2.90 DIA.

7.562.40

1/8 NPTF

3/4-16 .62

1.48

2.9 DIA.

.25

1/8 NPTAIR INLET

3/4-16

2.9 UNINF.

7005NBD-9930

7049NBD-10549

6.25”Red 1.3

MACK227QS34GY 1S6-067

W02-358-7085

2.84 DIA.3/8-16x

.50 DEEP

2.12 DIA.

1/8 NPTF.75

3.41

15.403.90

2.9 UNINF.

1/2-13x .80 DEEP

7013NBD-10183

7023NBD-10071

11.5”Green n/a AIR FLEX

(W02-A05-7085)

W02-358-7106

2.84 DIA.

2.10 DIA.

3.51

.50

.751/8 NPTF

.50

13.904.00

2.9 UNINF.

.75

6997NBD-13262

7047NBD-10526

9.87”Green 1.2 LINK MANUFACTURING LTD

1102-0030 (Pete.)

Slee

ve S

tyle

Par

ts

Sleeve Style Parts

135

ASSEMBLYORDER NO. CROSS SECTION VIEW

CAPDRAWING

NO.

PISTONDRAWING

NO.

BCRLOGO

COLORWEIGHT APPLICATIONS

INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available

W02-358-7206

PUSH TOCONNECTAIR FITTING

2.9 UNINF.3.09

.60

7.503.00

1.48

2.88

.60

6987NBD-15430

6986NBD-15431

6.5”White 1.2

FREIGHTLINER18-29919-000Century Class & Argosy COE (W02-377-7202) 2002 and earlier(replaces 7202)

W02-358-7035

3/8-16x .65 DEEP

(TH’D)

2.84 DIA.2.9 UNINF.

3/8-16

2.90 DIA.

1/8 NPTAIR INLET.75

1.48

8.602.40

.88

7068NBD-10470

7083NBD-13727

6.5”White 0.7

SEARS / DURAFORMS9383 (W02-811-7035)7025 AL (use 7035)

W02-358-7070

2.90 DIA.

9.502.40

1/8 NPTF

2.84 DIA.

.53

1.48

.50

2.9 UNINF.

.50

7042NBD-10409

6998NBD-12802

7.5”Pink 0.7 NATIONAL SEATING

2123403 (W02-N19-7070)

W02-358-7080

14.004.00

1/2-13x .87 DEEP

2.84 DIA.

.63

1/8 NPTF3/4-16

2.11 DIA.

3.51

2.9 UNINF.

7015NBD-10239

7033NBD-10238

10”Red 1.2 LINK MANUFACTURING LTD

1102-0031 (Frt.)

136

ASSEMBLYORDER NO. CROSS SECTION VIEW

CAPDRAWING

NO.

PISTONDRAWING

NO.

BCRLOGO

COLORWEIGHT APPLICATIONS

INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available

W02-358-7037

.50 DEEP

2.84 DIA.

3/8-16x

3/8-16x .54 DEEP

2.55 DIA.

1/8 NPTAIR INLET.75

1.57

10.102.50

2.9 UNINF .

7013NBD-10183

7054NBD-10795

8.0”White 0.7 AIR FLEX

(W02-A05-7037)

W02-358-7103

2.84 DIA.3/8-16x

.54 DEEP

2.90 DIA.

1/8 NPTF.75

1.48

9.752.40

2.9 UNINF.

3/8-16x .65 DEEP

(TH’D)

.88

7068NBD-10470

7083NBD-13727

7.75”White 0.7 3-T’S

W02-T03-7103

W02-358-7075

3/8-16x .50 DEEP

2.88 DIA.1/8 NPTF

2.84 DIA.

3/4-16 .62

1.48

9.752.40

2.9 UNINF.

7018NBD-10218

7052NBD-10552

7.75”White 0.7 LINK MANUFACTURING LTD

1102-0048

W02-358-7087

2.90 DIA.

8.752.40

1/8 NPTF

2.84 DIA.

.53

1.48

.50

2.9 UNINF.

.50

7042NBD-10409

6998NBD-12802

6.75”White 0.7

FREIGHTLINERFLD (1988 & later)GY 1S5-040

Slee

ve S

tyle

Par

ts

Sleeve Style Parts

137

ASSEMBLYORDER NO. CROSS SECTION VIEW

CAPDRAWING

NO.

PISTONDRAWING

NO.

BCRLOGO

COLORWEIGHT APPLICATIONS

INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available

W02-358-7032

1/2-13x .87 DEEP

2.84 DIA.3/8-16x .54 DEEP

2.11 DIA.

1/8 NPTAIR INLET

3.51

.75

14.603.89

2.9 UNINF.

7068NBD-10470

7033NBD-10238

10.87”White 1.2

CARE CONCEPT7022 AL (use 7032)

INDEPENDENT MOBILITY

3-T’S

W02-358-7012 14.42

3.89

1/2-13 x.80 DEEP

2.84 DIA.

.623/4-16

2.13 DIA.

1/8 NPTAIR INLET

3.38

2.9 UNINF.

7007NBD10010

7023NBD-10071

10.87”White 1.5

LINK MANUFACTURING LTD1102-0040

RIDE-RITE

VANTAGE WHEEL CHAIR

W02-358-7074

2.84 DIA.

2.10 DIA.

3.51

.50

.75

.50

14.104.01

2.9 UNINF.

1/8 NPTF

3/4-16

6997NBD-13262

7041NBD-10215

10.12”White 1.2

FREIGHTLINERLink (1102-0047)

LINK MANUFACTURING LTD1102-00451102-0047 (Frt.)

W02-358-7061

2.88 DIA.

10.002.40

1/8 NPTF

2.84 DIA.

3/4-16 .62

1.48

.50

2.9 UNINF.

.50

7042NBD-10409

7052NBD-10552

8”White 0.7 C. E. WHITE

138

ASSEMBLYORDER NO. CROSS SECTION VIEW

CAPDRAWING

NO.

PISTONDRAWING

NO.

BCRLOGO

COLORWEIGHT APPLICATIONS

INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available

W02-358-7151

1/2-13 UNC x.50 DEEP

2.10

2.84

3/8-16 UNC x.50 DEEP

1/8 NPTF

4.21

14.504.12

2.9 UNINF.

3.51

7068NBD-10470

7033NBD-10238

10.87”White 1.4

SEARS/DURAFORMS16894 (W02-811-7151)

Piston Adaptor7802/NBD 14989

W02-358-7056

2.84 DIA.

2.11 DIA.

3.51

.50

.751/8 NPTAIR INLET

.50

14.433.89

.75

2.9 UNINF.

6997NBD-13262

7047NBD-10526

10.87”White 1.2 LINK MANUFACTURING LTD

1102-0043 (Frt. KW, Mack)

W02-358-7045

2.84 DIA.

2.11 DIA.

3.51

.50

.751/8 NPT

AIR INLET

.50

3/4-16

14.434.04

2.9 UNINF.

7042NBD-10409

7041NBD-10215

10.87”White 1.2 LINK MANUFACTURING LTD

1102-0042 (Western Star)

W02-358-7042

14.434.04

1/2-13x .87 DEEP

2.84 DIA.

.62

1/8 NPTAIR INLET

3/4-16

2.12 DIA.

3.51

2.9 UNINF.

7015NBD-10239

7033NBD-10238

10.87”White 1.2 COMFORT RIDE

Slee

ve S

tyle

Par

ts

Sleeve Style Parts

139

ASSEMBLYORDER NO. CROSS SECTION VIEW

CAPDRAWING

NO.

PISTONDRAWING

NO.

BCRLOGO

COLORWEIGHT APPLICATIONS

INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available

W02-358-7017

15.033.89

1/2-13x .80 DEEP

2.84 DIA.

.62

1/8 NPTF

3/4-16

2.13 DIA.

3.38

2.9 UNINF.

7007NBD-10010

7023NBD-10071

11.5”Maroon 1.5 MACK

227QS38

W02-358-7029

1/2-13x .80 DEEP

2.84 DIA.3/8-16x .54 DEEP

2.11 DIA.

1/8 NPTAIR INLET

3.51

.75

15.754.01

2.9 UNINF.

7068NBD-10470

7033NBD-10238

11.75”White 1.2

CARE CONCEPT

INDEPENDENT MOBILITY

W02-358-7067

1/2-13 x.80 DEEP

2.84 DIA.3/8-16x

.54 DEEP

2.12 DIA.

1/8 NPTAIR INLET.75

3.41

15.403.89

2.9 UNINF.

7013NBD-10183

7023NBD-10071

11.5”White 1.5 AIR FLEX

(W02-A05-7067)

W02-358-7208

13.704.12

.50 .75

1/2-13 UNC X .80 DEEP

2.9 UNINF

2.11

2.84

3.51

6978FIP-100102

7033NBD-10238

11.12”White 1.0

SEATS708015(W02-812-7208)

140

ASSEMBLYORDER NO. CROSS SECTION VIEW

CAPDRAWING

NO.

PISTONDRAWING

NO.

BCRLOGO

COLORWEIGHT APPLICATIONS

INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available

W02-358-7109

2.88 DIA.

10.002.40

3.09

.60

1.48

2.9 UNINF.

.60

PUSH TOCONNECT

AIR FITTING

6990NBD-13706

6894NBD-14218

7.87”Yellow 1.0

KENWORTHKW Aerocab (mid 1999 & later)Link (1102-0077)

LINK MANUFACTURING LTD1102-0077 (KW)

W02-358-7108

3/8-16x .65 DEEP

(TH’D)

2.84 DIA.3/8-16x

.54 DEEP

2.90 DIA.

1/8 NPTF.75

1.48

9.752.40

2.9 UNINF.

.88

7068NBD-10470

7083NBD-13727

7.75”Yellow 0.7

LINK MANUFACTURING LTD1102-0075 (Nav.)

MILSCO07067AGY 1S5-057

W02-358-7064

3/8-16x .50 DEEP

2.88 DIA.1/8 NPT

AIR INLET

2.84 DIA.

3/4-16 .62

1.48

9.762.40

2.9 UNINF .

7018NBD-10218

7052NBD-10552

7.75”Yellow 0.7

KENWORTHKW Aerocab (mid 1999 & earlier)Link (1102-0074)

LINK MANUFACTURING LTD1102-0074 (KW, MARMON)

W02-358-4003 10.50

3.54

1.38 DIA.

1.68

3/8-16x .75 DEEP

.75

.50

2.87

1/8 NPTAIR INLET

2.0 UNINF.

7009NBD-10049

7044NBD-10514

7.25”Yellow n/a

COMFORT RIDE

SEARS / DURAFORMS6197 (W02-811-4003)

Slee

ve S

tyle

Par

ts

Sleeve Style Parts

141

ASSEMBLYORDER NO. CROSS SECTION VIEW

CAPDRAWING

NO.

PISTONDRAWING

NO.

BCRLOGO

COLORWEIGHT APPLICATIONS

INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available

W02-358-7036

2.84 DIA.

2.28 DIA.

3.49

1.25

1/8 NPTF

3/4-16x .88 TH’D

14.004.00

3/8-16x .50 DEEP

2.9 UNINF.

NYLONWASHER

NYLONNUT

7014NBD-10082

7069NBD-12816

10”Yellow 1.4

PETERBILT29-03200Uni-built-Highway Cab/Sleeper 1993 &laterUni-built ft Support Spring 7155

W02-358-7082

3/8-16x .50 DEEP

2.88 DIA.

10.252.40

1/8 NPTF

2.84 DIA.

3/4-16 .62

1.48

2.9 UNINF.

7018NBD-10218

7052NBD-10552

8.25”Yellow 0.7 FREIGHTLINER / WESTERN STAR

66003-3405

W02-358-7205

PUSH TOCONNECTAIR FITTING

2.88 DIA.

10.104.50

3.09

.60

1.48

2.9 UNINF.

.60

6987NBD-15430

6986NBD-15431

8.0”Yellow 1.2

FREIGHTLINER / WESTERN STAR66003-3406Constellation(supersedes 7203)

W02-358-7038

.50 DEEP(TH’D)

2.84 DIA.

3/8-16x

3/8-16x

.54 DEEP

2.33 DIA.

1/8 NPTAIR INLET.75

1.57

10.102.50

2.9 UNINF .

.75

7013NBD-10183

7054NBD-10795

8.0”Yellow 1.4

AIR FLEX7048 AL (use 7038)

DONVEL

142

ASSEMBLYORDER NO. CROSS SECTION VIEW

CAPDRAWING

NO.

PISTONDRAWING

NO.

BCRLOGO

COLORWEIGHT APPLICATIONS

INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available

W02-358-7081

1/2-13x .80 DEEP

2.84 DIA.

2.11 DIA.

3.51

15.504.00

1/8 NPTF

2.9 UNINF.

.75.75

7074NBD-11636

7033NBD-10238

11.5”Yellow 1.2

NAVISTARLink 1102-0076Link 1101-0043GY 1S5-038

LINK MANUFACTURING LTD1102-0076 (NAV.)

W02-358-7044

15.504.04

1/2-13x .80 DEEP

2.84 DIA.

.62

1/8 NPTAIR INLET

3/4-16

2.12 DIA.

3.51

2.9 UNINF.

7015NBD-10239

7033NBD-10238

11.5”Yellow 1.2

AIR FLEX7014 AL (use 7044)

LINK MANUFACTURING LTD1102-0070 7014 AL (use 7044)

W02-358-7043

1/2-13x .80 DEEP

2.84 DIA.3/8-16x

.54 DEEP

2.12 DIA.

1/8 NPTAIR INLET.75

3.41

15.394.01

2.9 UNINF.

7013NBD-10183

7023NBD-10071

11.5”Yellow 1.4 DONVEL

W02-358-7024 14.75

3.89

1/2-13x .80 DEEP

2.84 DIA.

.62

1/8 NPTAIR INLET

3/4-16

2.13 DIA.

3.36

2.9 UNINF.

7007NBD-10010

7023NBD-10071

10.0”Yellow 1.5 LINK MANUFACTURING LTD

1102-0071

Slee

ve S

tyle

Par

ts

Sleeve Style Parts

143

ASSEMBLYORDER NO. CROSS SECTION VIEW

CAPDRAWING

NO.

PISTONDRAWING

NO.

BCRLOGO

COLORWEIGHT APPLICATIONS

INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available

W02-358-7200

1/8 NPTF

3/4-16 UNFNYLONJAM NUT

3/8-16 UNC x .50 DEEP

2.9 UNINF.2.84

11.254.75

1.48

2.88.62

7018NBD-10218

7052NBD-10552

10.25”Blue 1.2

FREIGHTLINER / STERLING18-42609-000 Sterling SleeperOld Ford # P/N F6HT5C063BAHN-80 Sleeper (1996 & later)

W02-358-7093

13.804.70

3.09

.99

3.16

2.90 UNINF.

.65

2.30

PUSH TOCONNECT

AIR FITTING

6991NBD-14314

6891NBD-14589

10.0”Blue 1.4

PETERBILT29-06016Model 387 (new in 1999)

W02-358-7092

3/8-16x .50 DEEP

2.90 DIA.

10.752.40

1/8 NPTF

2.84 DIA.

3/4-16 .62

1.48

2.9 UNINF.

7018NBD-10218

7052NBD-10552

8.75”Blue 0.7

KENWORTHKWCSA (Link 1102-0083)

LINK MANUFACTURING LTD1102-0083 (KW)

W02-358-7152

3/8-16 UNC x.50 DEEP

3/8-16 UNC x.88 DEEP

1/8 NPTF

2.9 UNINF.

7.502.20

1.48

2.90

2.84

7068NBD-10470

7083NBD-13727

6.50”Blue 1.0 KNOEDLER

100095-000 (W02-K50-7152)

144

ASSEMBLYORDER NO. CROSS SECTION VIEW

CAPDRAWING

NO.

PISTONDRAWING

NO.

BCRLOGO

COLORWEIGHT APPLICATIONS

INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available

W02-358-9902

5.46 DIA.

2.75

11.503.70

3.88 DIA.

5.5 UNINF.

1/8 NPTF

TAPERED (127/95)

3/8-16x .56 DEEP

.753/4-16

6700NBD-13938

6897NBD-13939

8”N/A

LINK MANUFACTURING LTD1102-0080

W02-358-7110

2.84 DIA.

2.10 DIA.

3.51

3/8-16x .50 DEEP

.751/8 NPTF

14.504.00

2.9 UNINF.

.75

7018NBD-10218

7047NBD-10526

11.75”Blue 1.2

KENWORTHT2000-1998 & laterLink (1102-0082)

LINK MANUFACTURING LTD1102-0082 (KW)

W02-358-7083

15.504.00

1/2-13x .80 DEEP

2.84 DIA.

.63

1/8 NPTF

3/4-16

2.11 DIA.

3.51

2.9 UNINF.

7015NBD-10239

7033NBD-10238

11.5”Blue 1.2 LINK MANUFACTURING LTD

1102-0081 (Frt.)

W02-358-7207

PUSH TOCONNECTAIR FITTING

2.9 UNINF.3.09

.60

11.755.60

.601.48

2.88

6987NBD-15430

6986NBD-15431

10.75”Blue 1.2

FREIGHTLINER18-40977-000Centruy Class St(Supersedes by 7111)

Slee

ve S

tyle

Par

ts

Sleeve Style Parts

145

ASSEMBLYORDER NO. CROSS SECTION VIEW

CAPDRAWING

NO.

PISTONDRAWING

NO.

BCRLOGO

COLORWEIGHT APPLICATIONS

INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available

W21-760-9011

5.90 DIA. 1/4 NPTO/S 1.31

4.92

16.307.00

6.0 UNINF.

3/8-16x .70 DEEP6.00 DIA.

TAPERED (140/95)

7526NBD-14584

7571NAD-28088

12.8”N/A

RIDE-RITEW21-760-9010 (use 9011)

W21-760-9002

4.76 DIA.1/4 NPTF

3.22

12.804.30

3.59 DIA.

2.75

4.8 UNINF.

3/8-16x .56 DEEP

TAPERED (110/70)

3/8-16x .50DEEP

O/S 1.31

6988NBD-15305

7572NBD-14048 8.9” RIDE-RITE

(Medium Part)

W21-760-9001

4.76 DIA.1/4 NPTFO/S 1.31

3.22

11.804.30

3.59 DIA.

2.75

4.8 UNINF.

3/8-16x .56 DEEP

TAPERED (110/70)

3/8-16x .50DEEP

6988NBD-15305

7572NBD-14048 7.9” RIDE-RITE

(Short Part)

W21-760-9000

4.76 DIA.3/8-16

x .50DEEP

1/4 NPTF

3.22

13.804.30

3.59 DIA.

2.75

4.8 UNINF.

3/8-16x .56 DEEP

TAPERED (110/70)

O/S 1.31

6988NBD-15305

7572NBD-14048 9.9” RIDE-RITE

(Long Part)

INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available

ASSEMBLYORDER NO. CROSS SECTION VIEW

CAPDRAWING

NO.

PISTONDRAWING

NO.

BCRLOGO

COLORWEIGHT APPLICATIONS

146

N/A

6.50

15.755.12

3.81

1.05

6.38

6.94 UNINF

6714NAD-30942

6888NAD-31336

12.13”N/A

HENDRICKSON TRUCK64075-2 (W26-455-9912)

N/A15.755.12

1.05

3.81

6.50

6.94 UNINF.

6.38

6713NAD-30942

6888NAD-31336

12.13”N/A

HENDRICKSON TRUCK60750-2 (W26-455-9913)

N/A

6.94 UNINF

6.38

3.81

15.755.89

1.05

6.50

6711NAD-30942

6890NAD-30940

12.13”N/A

HENDRICKSON TRUCK59823-2 (W26-455-9911)

Slee

ve S

tyle

Par

ts

Sleeve Style Parts

147

ASSEMBLYORDER NO. CROSS SECTION VIEW

CAPDRAWING

NO.

PISTONDRAWING

NO.

BCRLOGO

COLORWEIGHT APPLICATIONS

INF. - Inflated (Max.) / UNINF. - Uninflated / (P) - Plastic / (AL) - Aluminum / BCR - Between Clamp Rings / N/A - Not Available