Radio Controlled JeepRadio Controlled Jeep

Chris Venditti Chris Ayoub Daniel Girgis Jonathan Avalishvili Paul Grobelny Saiff Ezeldin

Technical Specs.Technical Specs.

• • Chassis: WR-02• • Scale: 1/10• • Front Tread• • Rear Tread• • Chassis: ABS Monocoque• • Suspension: 4 wheel independent• • Damper Type: Plastic coil over friction• • Drive Train: 2WD gearbox• • Gear Ratio• • Differential Type: Bevel Gear• • Motor Included: Electric type 540• • Speed Controller Included: 3 Step F&R Mechanical• • Wheel/Tire Type: Chrome/V-Lug Pattern• • Body Included: Styrene body is molded in a military green color• • Radio Type: 2-Channel Surface• • Battery Type: 7.2V Battery

ChallengesChallenges

• Intricate small connections

• Multiple gear assembly

• Complex A-arm geometry

• Synchronizing suspension systems

FrameworkFramework

• Anchor to all parts• Default section for assembly• Includes main chassis and transmission

SuspensionSuspension

• 4 wheel independent system• Plastic coil over friction shocks• Assembled using pin and cylinder connections

Suspension in MotionSuspension in Motion

TransmissionTransmission

• Outer casing houses motor and gears• Most complex assembly due to multiple gear

connections and relations. • Drives the vehicle• Rear wheel drive

Transmission and GearsTransmission and Gears

SteeringSteering

• High torque steering servo• Front wheel steering • Ball joint connections between front steering

knuckle and servo saver

Steering MechanismSteering Mechanism

Final AssemblyFinal Assembly

• Combining all working assemblies• A-arms use pin connections• Shocks use pin and cylinders• Transmission use rigid connection

• Driveshaft use Bearings

• All parts in working order

Finished ProductFinished Product

Jeep in MotionJeep in Motion