Post on 09-Jan-2016
description
Preliminary Design of FONT4Digital ILC Feedback System
Hamid Dabiri khah
Queen Mary, University of London
30/05/2005
Digital Feedback SystemAD-DA processor module
Power Amplifier module
BPM KickerDown converter & filters
Analog signals
Digital signals
AD-DA Processor Module
DACAnalog Out
ADC
Analog In
Analog In
Filtering
Recording
Analysing
FPGA
Clocking System
RAM & ROM
ADCBus System
Digital I/O
Digital I/O
Digital I/O
Power Supply
ADC AD6645 (Analog Devices)
14 bit, 105 Msps, Latency = 3.5 clk cycle
DAC AD9744 (Analog Devices)
14 bit, 210 Msps, Output Settling Time tST =11ns,
Output Propagation delay tPD =1ns,
Output Rise Time tR =2.5ns, Input Setup Time tS =2ns,
Input Hold Time tH = 1.5ns, Latch Pulse Width tLPW = 1.5 ns
FPGA
Xilinx Virtex-4 XC4LX25-11FF6688C
Design tools
• ISE Foundation (Xilinx)
• CORE Generator (Xilinx)
• ChipScope Pro (xilinx)
• PCB design tools (Mentor graphics)
• MATLAB & Simulink
Timetable Required Tasks Estimated
required time (weeks)
Time taken Comments
1 Components 20 The first prototype is intended to be ready by March 2006
Some tasks should be carried out sequentially and some can be done in parallel with others.
2 Circuit Schematic design 4
3 PCB layout design 8
4 PCB realisation 4
5 Components mounting 4
6 Circuit and PCB testing 4
7 FPGA application development 20
8 Simulation and testing the FPGA application
4
9 Testing the whole circuit and application together
4