Powering on Devices

Post on 19-Nov-2015

23 views 0 download

description

Instructions on how to power on audio visual components at Capital City Vineyard Church

Transcript of Powering on Devices

  • TV Use remote labeled TV. Press the green POWER button on the top right.

    AV Receiver (two options) - Use remote labeled AUDIO. Press the green button - Without remote Press large circular button on front left of RECEIVER

    DVD Player (two options) - SOUND BOARD Power is required for DVD PLAYER- Use remote labeled DVD. Press the Red button- Press unlit button on front of DVD player

    Cable Box - SOUND BOARD Power is required for CABLE BOX- Use remote labeled Press CABLE (top center) then POWER.

    Sound Board - Should not be turned o . Green light should be on. - If this is not the case there is a toggle switch on the back of the board.

    CD / Cassette Player - SOUND BOARD Power is required for CD / CASSETTE PLAYER - Ensure Power Toggle button is depressed LCD Screen should be lit.

    Power On Devices