Post on 31-Mar-2015
October 2013
PL-T Horizontal Burning Instructions
Reema Sharma
2
Philips PL-T Bended Lamp Installation
When Philips PL-T Bended* lamps are installed in horizontal position, the Philips etch should be positioned facing UP, or as close as possible if the sockets are at an angle.
*PL-T Bended lamps consist of 3 bended tubes linked together in two places.
Philips Etch
3
Philips PL-T Bridged Lamp Installation
When Philips PL-T Bridged* lamps are installed in horizontal position, the Philips etch should be positioned facing DOWN, or as close as possible if the sockets are at an angle.
*PL-T Bridged lamps consist of six straight tubes linked together in five places. Philips Etch
4
Literature
Product Bulletins: Bended and Bridged including XEW
5
For horizontal application, install lamp with etch facing down
Pour une application horizontale, installer la lampe gravure vers le bas
Inner box packaging (example)