Public utilities

• NTP - 3000 Single

• NTP - 3000S Double

Trolley Shelters

NTP - 2300R Single

NTP - 2301R Double

NTP – 2000 Single

Trolley Shelter

NTP - 9000 Single

Trolley Shelter – Eco – Friendly Timber

NTP – 9001 Single

Trolley Shelter Eco – Friendly Timber

NSTP – 4800

Bulk Storage Unit

Side Entry

Trolley Shelter

Capacity 144 Trolleys

NSTP – 8400

End Entry

Trolley Shelter

SMOKING SHELTERS TO MEET LEGISLATION

OPTIONS:

•SMOKING BINS

•SEATS

•SHELVES

• Grade 304 Stainless Steel as Standard

• Grade 316 for Coastal regions

• Stainless Steel to be polished 240 grit finish

• Width 1200mm, 1580mm 2000mm

• Height 80mm

• Tube Diameter optional:

60.3 Dia x 2.6mm

50.8 Dia x 2.0mm

• Important Note: The radius of the loops are

to safety standard, eliminating personal injury

DESIGNED STANDARD

STAINLESS TROLLEY LOOP PARK

1581 Stainless steel loop with bump rail

Designed to reduce damage to Trolleys

and reduce repair costs

Fitted at the end of each Trolley corral

NUTEK BUS SHELTERS

FROM OUR STANDARD RANGE

COVERED / ENCLOSED WALKWAYS

STANDARD OR BESPOKE

COVERED WALKWAYSSHOWING SIDE INFILL PANELS

CYCLE SHELTERS FOR ALL APPLICATIONS

MANUFACTURED BOLLARDS

FOR INTERNAL

AND

EXTERNAL PROTECTION

NNNNNNNNNNNNNNNNNNNNNNNN

NN

• Designed to withstand impact from vehicles

• To protect plant materials, rollershutter doors, vulnerable corners of buildings

• Galvanised steel prevents rusting

• Surface mounted bollards 200mm high, 219mm diameter and 9.5mm wall thickness

• Fixed using 4 x M16 x 150mm studs and chemical resin anchors

• Canopy protection bollards

COLUMN PROTECTION

• Grade 304 stainless steel, grade 316Used in exterior use in coastal regions

• Stainless satin polish 240 grit finish

• 38mm minimum tube in two halves

• No protruding brackets above or below

COLUMN PROTECTION

• Grade 304 Stainless Steel

• Grade 316 for coastal regions, exterior use

• Stainless Steel, satin polish 240 grit finish

• 38mm tube in two halves with two fixing points

• Installed @ 750mm FFL to top of tube.

• Note: the radius of the fixing plates,manufactured by Nutek in house

DESIGNED TO BE SAFE…

NO SHARP EDGES!

COLUMN PROTECTION

• EXTERNAL & INTERNAL KEE KLAMP

• TO PROTECT PLANT, MATERIAL IN BACK OF HOUSE

• AREAS AND EXTERNAL YARDS.

• CAN BE ALSO BE USED FOR SLOPES AND CHANGE IN

FLOOR LEVELS

WAREHOUSE PROTECTION RAIL

• MILD STEEL

• GALVANISED

• 60MM X 40MM

• BOX SECTION

• VERY DURABLE

• STAINLESS STEEL LOW

LEVEL PROTECTION

• 2” (50MM) DIAMETER

• POTTED OR SURFACE -

MOUNTED

• CANOPY

• POST PROTECTION

• TROLLEY LOOPS

• ALL DESIGNED

• MANUFACTURED

• SUPPLIED

• INSTALLED BY NUTEK

NUTEK DESIGNS, MANUFACTURES AND

INSTALLS NEW PRODUCTS FOR RETAIL

ABOVE: CAGE MARSHALLING

BELOW LEFT: ENTRANCE LOBBY

STAINLESS STEEL WINDBREAK AND

ANTI-RAM BOLLARDS

HOME DELIVERY CANOPIES

TO MEET ALL STANDARDS

• 100% PVC FREE

• OR RECYCLED MATERIAL

• BASE TRIM AND VERTICAL CORNER GUARDS

• RIDGID OR FLEXIBLE

• STAINLESS CORNER GUARDS

• HALF ROUND CORNER GUARD

• STAINLESS STEEL, BRUSHED

• 100% RECYCLABLE

• DOES NOT WEAR OR AGE

• LOWER CARBON FOOTPRINT-

THAN METAL AND INJECTION

MOULDED VERSIONS

Series 2000

The Boston Bumper® Series

Series 3300

• THE CORE IS MADE COMPLETELY

FROM RECYCLED MATERIAL.

Easy as 1-2-3 1. Attach the base and end/corner cap to the desired surface by inserting #8 panhead screws through the pre-slotted holes in both the end cap and the base. Insert screws through the two holes of end cap and tighten.2a. Flexible Top: Butt end of the vinyl top against end/corner cap face. While applying pressure, bend back (banana peel) vinyl top so that vinyl legs are positioned within the base grooves. Roll vinyl top over full length of base, then tap with rubber mallet to ensure vinyl is securely locked into the base.

2b. Rigid Top: Snap the Rigid Top over the Rigid Base.3. If necessary wipe clean with any household cleaning product.

Installation Instructions

BALUSTRADE

• 1.5kN LOAD RATING FOR RETAIL ENVIRONMENT

• 48.3MM DIAMETER STAINLESS STEEL UPRIGHTS

• CAST STAINLESS STEEL FOOTPLATES WITH COVER PLATES

• 42.4MM DIAMETER STAINLESS STEEL HANDRAIL

10MMTHICK CLEAR GLASS

• 1100MM NOMINAL HEIGHT ON LEVEL AREAS

• ALL ABOVE ARE MINIMUM SPECIFICATIONS

Option

• 3.0kN LOAD RATING DESIGN AVAILABLE UPON REQUEST

• 1.5kN LOAD RATING FOR RETAIL ENVIRONMENT• 48.3MM DIAMETER STAINLESS STEEL UPRIGHTS • CAST STAINLESS STEEL FOOTPLATES WITH COVER PLATES• 42.4MM DIAMETER STAINLESS STEEL HANDRAIL AT 10MM THICK

CLEAR GLASS• 1100MM NOMINAL HEIGHT ON LEVEL AREAS• 950MM NOMINAL HEIGHT ON RAKED AREA`S

ALL ABOVE ARE MINIMUM SPECIFACATIONSOption• 3.0kN LOAD RATING DESIGN AVAILABLE UPON REQUEST