forDealership

s

Global Clientele

What is CONFORM™? Patented Concrete Forming Technology

(CFT)

Components interconnect together to createa finished concrete wall

Rigid polymer components thatserve as concrete formwork for:– bearing walls– non bearing walls– shear walls– retaining walls – foundation walls

200 mm -8” wallinsulated

200 mm -8” wall

150 mm -6” wall

CF8i CF8 CF6 CF4100 mm -4” wall

Wall Types

ConcreteConcrete Service ChannelService Channel

Reinforcing BarReinforcing Bar

Polymer ShellPolymer Shell

CF8iCF8i(200mm-8” Wall-Insulated)(200mm-8” Wall-Insulated) ANATOMY OF A CONFORM™

WALL

InsulationInsulation

Colour Choices

TanTan

WhiteWhite

Cost Competitive

CONFORM™ is cost competitive with

quality CMU construction

“Quality” CMU construction is

– Built to code

– Built by a qualified contractor

– Paint or finishing on exterior surface

– Paint, gypsum board interior surface

The CONFORM™ Advantage

Integrated building technology

Solid concrete technology -“Built tough - built to last!”

Easy to design using our CFD (CONFORM™ Design) tool bars for AutoCAD

Unparalleled finishing flexibility

Fast-track construction increase bottom line

IntegratedBuilding

Technology The CF8i wall assembly has a minimum effective R-value of 22 (RSI 3.82) in cold climates

Maintenance-free walls that will not leak or rot, is resistant to UV degradation and to mold/mildew growth

Effective deterrent to termites and other pests

Since CONFORM™ is an integrated building system, it incorporates the insulation/air/vapor barrier within the wall envelope

Experiencing these problems ?

Rust & Corrosion?

Peeling Paint?

Mold & Mildew?

Staining?

Hard To Keep Clean?

The only solution that is:

Corrosion Resistant

Durable

Easy to Clean

Requires Minimal Maintenance

Constructs Quickly

Constructs Quickly

Every project is custom made in our factory

All components are pre-cut and labeled for easy on site assembly

Less skilled labor required on site / cleaner overall work site

Reduced Construction Schedule

Cleans Easily

Cleaning CONFORM™ Walls is easy using household cleaners and a power washer

For tougher stains use Revive or Graffiti remover

Application and Uses

Limited only by the designer’s imagination (where concrete can be used, CONFORM™ can be used)

CF8i (8” thick Insulated Wall): Industrial, Commercial, Institutional, Agricultural and Foundation Walls

CF6 & CF8 (6” & 8” thick walls): Industrial, Commercial, Institutional, Mid-rise Residential.

CF4 (4” thick wall): Low-rise Residential, Commercial, Institutional

For additional information

visit our website

www.nuformdirect.com

or contact us toll free

1.877.747.WALL(9255)