MWS COMMERCIAL FIXTURE INTERFACE

1 2 0 V / 2 7 7 V / 3 4 7 V

1 2 0 V / 2 7 7 V / 3 4 7 V – 2 C I R C U I T, 2 N E U T R A L

M W S F I X T U R E C A B L E S

The MWS Fixture Cable (FC) continues p ower from the Starter orSwitch Drop to the first lighting fixture and between lighting fixtu r e s .

The line side connector snaps intoany 1/2" knockout and has 6" #18leads to connect to fixture wiring.

MWS Fixture Cables may havelength added with an Extender Cable.

• Positive fixture locking clip locks into any 1/2" knockout and is self grounding to the fixture or access plate.

• Tap leads to the fixture come standard with poke home connectors for fast termination to fixture leads.

Specifications and Dimensions subject to change without notice.

O R D E R I N G I N F O R M AT I O N

SA M PL E NUM B ER: 2 7 F C 1 2 / 2 G 0 9

Fixture cables available in #12 AWG only,rated at 20 amperes. Cooper Lighting will factory att a ch 9', 11', 13' and 15' fixture cables.

ComponentF C=Fixture Cable

FC

Voltage1 2= 12 0 V2 7= 2 7 7 V3 4= 3 4 7 V

Conductors and Size1 2 / 2 G= # 12, 2 Conductor Plus Ground1 2 / 3 G= # 12, 3 Conductor Plus Ground 1 2 / 4 G= # 12, 4 Conductor Plus Ground

Options2 N=2 Circuit, 2 Neutral( 12/4G only).G W=Ground Wire toF i x t u r e

Cable Length0 7=7 ft .0 9=9 ft .11= 11 ft .1 3= 13 ft .1 5= 15 ft .17= 17 ft .

7' 2.5 lbs. 109' 3.0 lbs. 911' 3.5 lbs. 713' 4.0 lbs. 615' 4.5 lbs. 617' 5.0 lbs. 5

S H I P P I N G I N F O R M AT I O NCable Unit StandardLength Wt. Qty./Carton

FIXTURE CABLE FC

Note: Ground wire to fixture included with GW option.