MTBF Calculator (Reliability Calculation System)

MTBF CALCULATORProject : MTBF Calculator (Software Tool of Reliability Prediction) Project Manager : Ferdi Tekin, Computer Engineer, 2003 B.Sc, 2008 M.Sc.Purpose : MTBF Calculation SystemDocument Version : P.2.011Document Date : 26.03.2009Revision Date : 27.04.2009Description : Mean time between failures (MTBF) is the mean (average) time between failures of a system, the reciprocal of the failure rate in the special case when the failure rate is constant. Calculations of MTBF assume that a system is "renewed", i.e. fixed, after each failure, and then returned to service immediately after failure. A related term, mean distance between failures, with a similar and more intuitive sense, is widely used in transport industries such as railways and trucking. The average time between failing and being returned to service is termed mean down time (MDT).

With Sampling: Bio Organic Mechanic Electronic Robot (BOMER_V01)

http://mtbf.polimore.com/ 1/233

Index1. Connect the MTBF Calculator (http://mtbf.polimore.com)..................................32. Sign Up...............................................................................................................33. Forgot Password..................................................................................................64. Share..................................................................................................................85. Languages..........................................................................................................96. Use map (External view)...................................................................................177. Live Print...........................................................................................................198. Special RSS.......................................................................................................209. Login.................................................................................................................2210. Support Center................................................................................................2311. Change Information........................................................................................2612. Dashboard......................................................................................................2713. Before BOMER_V01 beginning with the sampling..........................................2814. Create the missing parts................................................................................3015. BOMER_V01 to start with the sampling..........................................................9916. Adding components to the BOMER_V01's system........................................11317. System Tree View..........................................................................................20918. Tree Structure...............................................................................................21019. Ironwork Components...................................................................................21220. Act_Mechanism Components........................................................................21321. Anti_Graviton_Act Components....................................................................21422. Nervous_System Components......................................................................21523. Organic_Muscles Components......................................................................21624. Organic_Surface Components......................................................................21725. Nano_Fast_CPU Components........................................................................21826. Nano_Fast_ALU Components.........................................................................21927. Nano_Fast_RAM Components........................................................................22028. Nano_Fast_DISK Components.......................................................................22129. Micro_Compact_BOARD Components...........................................................22230. Sensors Components....................................................................................22331. Cameras Components..................................................................................22432. Decision_Support_Unit Components.............................................................22533. Decision_Evaluation_Unit Components.........................................................22634. 3D_Graphic_Laser_Scanner Components.....................................................22735. Electronic_Sonar_System Components.........................................................22836. BOMER_V01 System Tree Components.........................................................22937. Share Product...............................................................................................231

1. Connect the MTBF Calculator (http://mtbf.polimore.com).

2. Sign Up.

2.1 Fill the registration form.

2.2 Registration verification screen.

2.3 Getting registration mail.

2.4 Go to account activation address.

3. Forgot Password.

3.1 Fill the forgot password form.

3.2 Validation of forgot password.

3.3 Getting new password.

4. Share.

4.1 Fill the share form.

4.2 Validation of the share form.

5. Languages

5.1 Switch to Turkish language in practice.

5.2. Turkish language used with the application.

5.3 Switch to Spanish language in practice.

5.4 Spanish language used with the application.

5.5 Switch to Japanase language in practice.

5.6 Japanase language used with the application.

5.7 Switch to English (U.S.) language in practice.

5.8 English (U.S.) language used with the application.

5.9. Switch to German language in practice.

5.10 German language used with the application.

5.11 Switch to French language in practice.

5.12 French language used with the application.

5.13 Switch to Italian language in practice.

5.14 Italian language used with the application.

6. Use map (External view).

6.1 Click the “World Map” link.

6.2 View the access to the application on the world map.

7. Live Print.

7.1 Click the Live Print link.

7.2 Live Print at any time with print feature to get the output image. Page barcodes will always place the output image.

8. Special RSS.

8.1 Click the special RSS link.

8.2 Customized RSS links within the system of special access to shares.

9. Login

9.1 For entry into the system, the member with the user name and password, login using the security code.

9.2 With the message you meet the system's welcome screen (Dashboard).

9.3 In the “World Map”, where you can see access. And in other places in connection with a different color to stress.

10. Support Center.

10.1 Access to support center

10.2 Type your message in our support center and then “Send my message” button.

10.3 Message sent confirmation screen.

10.4 Support e-mail message has been forwarded.

11. Change Information.

11.1 To update your information or change your information, go to the “Change Information”.

11.2 You want to add or change information, fill in your name and company. Then press the button “Change my information”.

11.3 Information for change verification screen.

12. Dashboard.

12.1 Welcome screen, the system access the table are related to your records. If you still can see a warning message if you do not have a record. On the Welcome screen before you have access to the system date and now you can see that the system date. However, important documents and links in the system of the screen is once again accessible. Do you have the Welcome screen to records and registration details will allow you to easily access.

12.2 Does not yet have any record in the system registry to add the warning that we can see that on.

13. Before BOMER_V01 beginning with the sampling.

13.1 Start with the following examples given structure will identify the system here. Description of the system components of the system immediately after their registration by adding the relevant sections of our system components will occur. After all these belong to the structural system as the outputs will have created.

BOMER_V01 (Bio Organic Mechanic Electronic Robot) •Mechanic_Units •Ironwork •Act_Mechanism •Anti_Graviton_Act •Organic_Units •Nervous_System •Organic_Muscles •Organic_Surface •Elektronic_Units •Electronic_Brain •Nano_Fast_CPU •Nano_Fast_ALU •Nano_Fast_RAM •Nano_Fast_DISK •Micro_Compact_BOARD •Electronic_Control_Units •Sensors •Cameras •Decision_Support_Unit •Decision_Evaluation_Unit •3D_Graphic_Laser_Scanner •Electronic_Sonar_System

13.2 When entering a special system (BOMER_V01) to identify some of the data is required beforehand. To make this definition we will do in accordance with the definition and structure definition of the group are required to do. Then use these definitions to be maintained, even if we want this definition to the use of “My Constant”, “Other Constant”, and “All Internet” we can open it. Descriptions, if we do not want anyone to use to make your own just to describe. To do in any particular definition, simply click on the link is created with orange icons.

14. Create the missing parts.

14.1 Create Steel Body

14.1.1 Switch to Solid

14.1.2 Switch to Hard

14.1.3 Switch to Create Hard

14.1.4 Fill out the form for Steel Body.

14.1.5 Steel Body for the registration confirmation screen. I accept the definition of the button to complete the process.

14.1.6 Steel Body for defining complete screen.

14.1.7 Steel Body to monitor the list, check description.

14.1.8 That the definition given for the Steel Body to review the details. You can delete this record, change, or you can view the contents.

14.2. Create Joint Act

14.2.1 Switch to Mechanic

14.2.2 Switch to Slider-Crank Mechanisms

14.2.3 Switch to Sliding Rings, Dynamic Seals

14.2.4 Switch to Create Rings, Dynamic Seals

14.2.5 Fill out the form for Joint Act.

14.2.6 Joint Act for the registration confirmation screen. I accept the definition of the button to complete the process.

14.2.7 Joint Act for defining complete screen.

14.2.8 Joint Act to monitor the list, check description.

14.2.9 That the definition given for the Joint Act to review the details. You can delete this record, change, or you can view the contents.

14.3 Create Body Gear

14.3.2 Switch to Gears and Splines

14.3.3 Switch to Spur and Helical Gears

14.3.4 Switch to Create Spur and Helical Gears

14.3.5 Fill out the form for Body Gear.

14.3.6 Body Gear for the registration confirmation screen. I accept the definition of the button to complete the process.

14.3.7 Body Gear for defining complete screen.

14.3.8 Body Gear to monitor the list, check description.

14.3.9 That the definition given for the Body Gear to review the details. You can delete this record, change, or you can view the contents.

14.4 Create Graviton Act Motor

14.4.2 Switch to Accumulators, Electric Motors

14.4.3 Switch to Create Spur and Helical Gears

14.4.4 Fill out the form for Graviton Act Motor.

14.4.5 Graviton Act Motor for the registration confirmation screen. I accept the definition of the button to complete the process.

14.4.6 Graviton Act Motor for defining complete screen.

14.4.7 Graviton Act Motor to monitor the list, check description.

14.4.8 That the definition given for the Graviton Act Motor to review the details. You can delete this record, change, or you can view the contents.

14.5 Create Gasket

14.5.2 Switch to Seals and Gaskets

14.5.3 Switch to Create Seals and Gaskets

14.5.4 Fill out the form for Gasket.

14.5.5 Gasket for the registration confirmation screen. I accept the definition of the button to complete the process.

14.5.6 Gasket for defining complete screen.

14.5.7 Gasket to monitor the list, check description.

14.5.8 That the definition given for the Gasket to review the details. You can delete this record, change, or you can view the contents.

14.6 Create Carbon Type 1

14.6.1 Switch to Organic

14.6.2 Switch to Carboxylic Acids and Their Derivatives

14.6.3 Switch to Create Carboxylic Acids and Their Derivatives

14.6.4 Fill out the form for Carbon Type 1.

14.6.5 Carbon Type 1 for the registration confirmation screen. I accept the definition of the button to complete the process.

14.6.6 Carbon Type 1 for defining complete screen.

14.6.7 Carbon Type 1 to monitor the list, check description.

14.6.8 That the definition given for the Carbon Type 1 to review the details. You can delete this record, change, or you can view the contents.

14.7 Create B-Dicarbonyl

14.7.2 Switch to Synthesis and Reactions of ß-Dicarbonyl Compounds

14.7.3 Switch to Create Synthesis and Reactions of ß-Dicarbonyl Compounds

14.7.4 Fill out the form for B-Dicarbonyl

14.7.5 B-Dicarbonyl for the registration confirmation screen. I accept the definition of the button to complete the process.

14.7.6 B-Dicarbonyl for defining complete screen.

14.7.7 B-Dicarbonyl to monitor the list, check description.

14.7.8 That the definition given for the B-Dicarbonyl to review the details. You can delete this record, change, or you can view the contents.

14.8 Create Lipid Type 1

14.8.2 Switch to Lipids

14.8.3 Switch to Create Lipids

14.8.4 Fill out the form for Lipid Type 1

14.8.5 Lipid Type 1 for the registration confirmation screen. I accept the definition of the button to complete the process.

14.8.6 Lipid Type 1 for defining complete screen.

14.8.7 Lipid Type 1 to monitor the list, check description.

14.8.8 That the definition given for the Lipid Type 1 to review the details. You can delete this record, change, or you can view the contents.

14.9 Create U. System Type 1

14.9.2 Switch to Conjugated Unsaturated Systems

14.9.3 Switch to Create Conjugated Unsaturated Systems

14.9.4 Fill out the form for U. System Type 1

14.9.5 U. System Type 1 for the registration confirmation screen. I accept the definition of the button to complete the process.

14.9.6 U. System Type 1 for defining complete screen.

14.9.7 U. System Type 1 to monitor the list, check description.

14.9.8 That the definition given for the U. System Type 1 to review the details. You can delete this record, change, or you can view the contents.

14.10 Create Protein Type 1

14.10.2 Switch to Amino Acids and Proteins

14.10.3 Switch to Create Amino Acids and Proteins

14.10.4 Fill out the form for Protein Type 1

14.10.5 Protein Type 1 for the registration confirmation screen. I accept the definition of the button to complete the process.

14.10.6 Protein Type 1 for defining complete screen.

14.10.7 Protein Type 1 to monitor the list, check description.

14.10.8 That the definition given for the Protein Type 1 to review the details. You can delete this record, change, or you can view the contents.

14.11 Create Sens Type 1

14.11.2 Switch to Sensors and Transducers

14.11.3 Switch to Create Sensors and Transducers

14.11.4 Fill out the form for Sens Type 1

14.11.5 Sens Type 1 for the registration confirmation screen. I accept the definition of the button to complete the process.

14.11.6 Sens Type 1 for defining complete screen.

14.11.7 Sens Type 1 to monitor the list, check description.

14.11.8 That the definition given for the Sens Type 1 to review the details. You can delete this record, change, or you can view the contents.

14.12 Create Cam Type 1

14.12.1 Switch to Electronic

14.12.2 Switch to Constant MTBF

14.12.3 Switch to Create Constant MTBF

14.12.4 Fill out the form for Cam Type 1

14.12.5 Cam Type 1 for the registration confirmation screen. I accept the definition of the button to complete the process.

14.12.6 Cam Type 1 for defining complete screen.

14.12.7 Cam Type 1 to monitor the list, check description.

14.12.8 That the definition given for the Cam Type 1 to review the details. You can delete this record, change, or you can view the contents.

14.13 Create Decision Support Unit

14.13.2 Switch to Internal Unit

14.13.3 Switch to Create Internal Unit

14.13.4 Fill out the form for Decision Support Unit

14.13.5 Decision Support Unit for the registration confirmation screen. I accept the definition of the button to complete the process.

14.13.6 Decision Support Unit for defining complete screen.

14.13.7 Decision Support Unit to monitor the list, check description.

14.13.8 That the definition given for the Decision Support Unit to review the details. You can delete this record, change, or you can view the contents.

14.14 Create Decision Evaluation Unit

14.14.4 Fill out the form for Decision Evaluation Unit

14.14.5 Decision Evaluation Unit for the registration confirmation screen. I accept the definition of the button to complete the process.

14.14.6 Decision Evaluation Unit for defining complete screen.

14.14.7 Decision Evaluation Unit to monitor the list, check description.

14.14.8 That the definition given for the Decision Evaluation Unit to review the details. You can delete this record, change, or you can view the contents.

14.15 Create 3D Graphic Laser Unit

14.15.4 Fill out the form for 3D Graphic Laser Unit

14.15.5 3D Graphic Laser Unit for the registration confirmation screen. I accept the definition of the button to complete the process.

14.15.6 3D Graphic Laser Unit for defining complete screen.

14.15.7 3D Graphic Laser Unit to monitor the list, check description.

14.15.8 That the definition given for the 3D Graphic Laser Unit to review the details. You can delete this record, change, or you can view the contents.

14.16 Create Electronic Sonar System

14.16.4 Fill out the form for Electronic Sonar System

14.16.5 Electronic Sonar System for the registration confirmation screen. I accept the definition of the button to complete the process.

14.16.6 Electronic Sonar System for defining complete screen.

14.16.7 Electronic Sonar System to monitor the list, check description.

14.16.8 That the definition given for the Electronic Sonar System to review the details. You can delete this record, change, or you can view the contents.

15. BOMER_V01 to start with the sampling.

15.1 The system is defined as structural. Below we will study the structure belongs to the system are available.

BOMER_V01 (Bio Organic Mechanic Electronic Robot) •Mechanic_Units •Ironwork •Act_Mechanism •Anti_Graviton_Act •Organic_Units •Nervous_System •Organic_Muscles •Organic_Surface •Elektronic_Units •Electronic_Brain •Nano_Fast_CPU •Nano_Fast_ALU •Nano_Fast_RAM •Nano_Fast_DISK •Micro_Compact_BOARD •Electronic_Control_Units •Sensors •Cameras •Decision_Support_Unit •Decision_Evaluation_Unit •3D_Graphic_Laser_Scanner •Electronic_Sonar_System

15.2 Click the System Tree Management.

15.3 Write main system tree name “BOMER_V01”. Then, press the “Add a new tree” button.

15.4 Main system tree name verification screen.

15.5 Select the main system tree.

15.6 The following optional features will be opened on the main section.

15.7 Add “Mechanic_Units” sub-section in first-level “BOMER_V01” section.

15.8 Add “Organic_Units” sub-section in first-level “BOMER_V01” section.

15.9 Add “Elektronic_Units” sub-section in first-level “BOMER_V01” section.

15.10 Add “Ironwork” sub-section on the second level to “Mechanic_Units”.

15.11 Add “Act_Mechanism” sub-section on the second level to “Mechanic_Units”.

15.12 Add “Anti_Graviton_Act” sub-section on the second level to “Mechanic_Units”.

15.13 Add “Nervous_System” sub-section on the second level to “Organic_Units”.

15.14 Add “Organic_Muscles” sub-section on the second level to “Organic_Units”.

15.15 Add “Organic_Surface” sub-section on the second level to “Organic_Units”.

15.16 Add “Electronic_Brain” sub-section on the second level to “Elektronic_Units”.

15.17 Add “Electronic_Control_Units” sub-section on the second level to “Elektronic_Units”.

15.18 Add “Nano_Fast_CPU” sub-section on the third level to “Electronic_Brain”.

15.19 Add “Nano_Fast_ALU” sub-section on the third level to “Electronic_Brain”.

15.20 Add “Nano_Fast_RAM” sub-section on the third level to “Electronic_Brain”.

15.21 Add “Nano_Fast_DISK” sub-section on the third level to “Electronic_Brain”.

15.22 Add “Micro_Compact_BOARD” sub-section on the third level to “Electronic_Brain”.

15.23 Add “Sensors” sub-section on the third level to “Electronic_Control_Units”.

15.24 Add “Cameras” sub-section on the third level to “Electronic_Control_Units”.

15.25 Add “Decision_Support_Unit” sub-section on the third level to “Electronic_Control_Units”.

15.26 Add “Decision_Evaluation_Unit” sub-section on the third level to “Electronic_Control_Units”.

15.27 Add “3D_Graphic_Laser_Scanner” sub-section on the third level to “Electronic_Control_Units”.

15.28 Add “Electronic_Sonar_System” sub-section on the third level to “Electronic_Control_Units”.

15.29 Here defined as systems that have been completed. We have to connect the system components necessary steps to the system are passed.

16. Adding components to the BOMER_V01's system.

16.1 Ironwork sub-section of the component.

16.1.1 Switch to Solid

16.1.2 Switch to Hard

16.1.3 Switch to My Hard

16.1.4 Steel Body component from the list will be used to select appropriate.

16.1.5 “System Tree: BOMER_V01”, “Tree Nodes: Ironwork”, “Component Reference Name: IR01”, “Description: ”, and then press “Add the result to the system” button.

16.1.6 IR01 verification screen.

16.2 Ironwork sub-section of the component.

16.2.3 Switch to My Seals and Gaskets

16.2.4 Gasket component from the list will be used to select appropriate.

16.2.5 “System Tree: BOMER_V01”, “Tree Nodes: Ironwork”, “Component Reference Name: IR02”, “Description: ”, and then press “Add the result to the system” button.

16.2.6 IR02 verification screen.

16.3 Act_Mechanism sub-section of the component.

16.3.2 Switch to Gears and Splines

16.3.3 Switch to Spur and Helical Gears

16.3.4 Switch to My Spur and Helical Gears

16.3.5 Body Gear component from the list will be used to select appropriate.

16.3.6 “System Tree: BOMER_V01”, “Tree Nodes: Act_Mechanism”, “Component Reference Name: AM01”, “Description: ”, and then press “Add the result to the system” button.

16.3.7 AM01 verification screen.

16.4.3 Switch to My Seals and Gaskets

16.4.4 Gasket component from the list will be used to select appropriate.

16.4.5 “System Tree: BOMER_V01”, “Tree Nodes: Act_Mechanism”, “Component Reference Name: AM02”, “Description: ”, and then press “Add the result to the system”.

16.4.6 AM02 verification screen.

16.5.2 Switch to Accumulators, Electric Motors

16.5.3 Switch to My Accumulators, Electric Motors

16.5.4 Graviton Act Motor component from the list will be used to select appropriate.

16.5.5 “System Tree: BOMER_V01”, “Tree Nodes: Anti_Graviton_Act”, “Component Reference Name: AGA01”, “Description: ”, and then press “Add the result to the system”.

16.5.6 AGA01 verification screen.

16.6 Nervous_System sub-section of the component.

16.6.3 Switch to My Lipids

16.6.4 Lipid Type 1 component from the list will be used to select appropriate.

16.6.5 “System Tree: BOMER_V01”, “Tree Nodes: Nervous_System”, “Component Reference Name: NS01”, “Description: ”, and then press “Add the result to the system”.

16.6.6 NS01 verification screen.

16.7.3 Switch to My Amino Acids and Proteins

16.7.4 Protein Type 1 component from the list will be used to select appropriate.

16.8.3 Switch to My Synthesis and Reactions of ß-Dicarbonyl Compounds

16.8.4 B-Dicarbonyl component from the list will be used to select appropriate.

16.9 Organic_Muscles sub-section of the component.

16.9.5 “System Tree: BOMER_V01”, “Tree Nodes: Organic_Muscles”, “Component Reference Name: OM01”, “Description: ”, and then press “Add the result to the system”.

16.9.6 OM01 verification screen.

16.10 Organic_Muscles sub-section of the component.

16.10.3 Switch to My Lipids

16.10.4 Lipid Type 1 component from the list will be used to select appropriate.

16.10.5 “System Tree: BOMER_V01”, “Tree Nodes: Organic_Muscles”, “Component Reference Name: OM02”, “Description: ”, and then press “Add the result to the system”.

16.10.6 OM02 verification screen.

16.11 Organic_Surface sub-section of the component.

16.11.3 Switch to My Synthesis and Reactions of ß-Dicarbonyl Compounds

16.11.4 B-Dicarbonyl component from the list will be used to select appropriate.

16.11.5 “System Tree: BOMER_V01”, “Tree Nodes: Organic_Surface”, “Component Reference Name: OS01”, “Description: ”, and then press “Add the result to the system”.

16.11.6 OS01 verification screen.

16.12 Organic_Surface sub-section of the component.

16.12.5 “System Tree: BOMER_V01”, “Tree Nodes: Organic_Surface”, “Component Reference Name: OS02”, “Description: ”, and then press “Add the result to the system”.

16.12.6 OS02 verification screen.

16.13 Nano_Fast_CPU sub-section of the component.

16.13.2 Switch to Microcircuits

16.13.3 Switch to Gate/Logic Arrays and Microprocessors

16.13.4 After entering parameters press CALCULATE button.

16.13.5 “System Tree: BOMER_V01”, “Tree Nodes: Nano_Fast_CPU”, “Component Reference Name: NFC01”, “Description: ”, and then press “Add the result to the system”.

16.13.6 NFC01 verification screen.

16.14 Nano_Fast_CPU sub-section of the component.

16.14.3 Switch to GaAs MMIC and Digital Devices

16.14.5 “System Tree: BOMER_V01”, “Tree Nodes: Nano_Fast_CPU”, “Component Reference Name: NFC02”, “Description: ”, and then press “Add the result to the system”.

16.15 Nano_Fast_ALU sub-section of the component.

16.15.5 “System Tree: BOMER_V01”, “Tree Nodes: Nano_Fast_ALU”, “Component Reference Name: NFA01”, “Description: ”, and then press “Add the result to the system”.

16.16 Nano_Fast_ALU sub-section of the component.

16.16.3 Switch to Memories

16.16.5 “System Tree: BOMER_V01”, “Tree Nodes: Nano_Fast_ALU”, “Component Reference Name: NFA02”, “Description: ”, and then press “Add the result to the system”.

16.16.6 NFA02 verification screen.

16.17 Nano_Fast_RAM sub-section of the component.

16.17.3 Switch to Memories

16.17.5 “System Tree: BOMER_V01”, “Tree Nodes: Nano_Fast_RAM”, “Component Reference Name: NFR01”, “Description: ”, and then press “Add the result to the system”.

16.17.6 NFR01 verification screen.

16.18 Nano_Fast_DISK sub-section of the component.

16.18.5 “System Tree: BOMER_V01”, “Tree Nodes: Nano_Fast_DISK”, “Component Reference Name: NFD01”, “Description: ”, and then press “Add the result to the system”.

16.18.6 NFD01 verification screen.

16.19 Nano_Fast_DISK sub-section of the component.

16.19.2 Switch to Rotating Devices

16.19.3 Switch to Rotating Devices, Motors

16.19.5 “System Tree: BOMER_V01”, “Tree Nodes: Nano_Fast_DISK”, “Component Reference Name: NFD02”, “Description: ”, and then press “Add the result to the system”.

16.19.6 NFD02 verification screen.

16.20 Micro_Compact_BOARD sub-section of the component.

16.20.2 Switch to Interconnection Assemblies

16.20.3 Switch to Interconnection Assemblies with Plated Through Holes

16.20.5 “System Tree: BOMER_V01”, “Tree Nodes: Micro_Compact_BOARD”, “Component Reference Name: MCB01”, “Description: ”, and then press “Add the result to the system”.

16.20.6 MCB01 verification screen.

16.21 Sensors sub-section of the component.

16.21.2 Switch to Sensors and Transducers

16.21.3 Switch to My Sensors and Transducers

16.21.5 “System Tree: BOMER_V01”, “Tree Nodes: Sensors”, “Component Reference Name: S01”, “Description: ”, and then press “Add the result to the system”.

16.21.6 S01 verification screen.

16.22 Cameras sub-section of the component.

16.22.3 Switch to My Constant MTBF

16.22.5 “System Tree: BOMER_V01”, “Tree Nodes: Cameras”, “Component Reference Name: C01”, “Description: ”, and then press “Add the result to the system”.

16.22.6 C01 verification screen.

16.23 Cameras sub-section of the component.

16.23.3 Switch to My Constant MTBF

16.23.5 “System Tree: BOMER_V01”, “Tree Nodes: Cameras”, “Component Reference Name: C01”, “Description: ”, and then press “Add the result to the system”.

16.23.6 C01 verification screen.

16.24 Decision_Support_Unit sub-section of the component.

16.24.3 Switch to My Internal Unit

16.24.4 Decision Support Unit for the registration confirmation screen. I accept the definition of the button to complete the process.

16.24.5 “System Tree: BOMER_V01”, “Tree Nodes: Decision_Support_Unit”, “Component Reference Name: DSU01”, “Description: ”, and then press “Add the result to the system”.

16.24.6 DSU01 verification screen.

16.25 3D_Graphic_Laser_Scanner sub-section of the component.

16.25.4 3D Graphic Laser component from the list will be used to select appropriate.

16.25.5 “System Tree: BOMER_V01”, “Tree Nodes: 3D_Graphic_Laser_Scanner”, “Component Reference Name: 3DG01”, “Description: ”, and then press “Add the result to the system”.

16.25.6 3DG01 verification screen.

16.26 Electronic_Sonar_System sub-section of the component.

16.26.4 Electronic Sonar System component from the list will be used to select appropriate.

16.26.5 “System Tree: BOMER_V01”, “Tree Nodes: Electronic_Sonar_System”, “Component Reference Name: ESS01”, “Description: ”, and then press “Add the result to the system”.

16.26.6 ESS01 verification screen.

16.27 All public data entry was completed expressions of interest and sampling. Let the system operates now complete.

17. System Tree View

17.1 Click the “System Tree View”

18. Tree Structure

18.1 System tree tables. Click the BOMER_V01 “Tree Structure”.

18.2 BOMER_V01 tree structure.

19. Ironwork Components

19.1 Click the “Ironwork Components”.

19.2 BOMER_V01 >> Ironwork components IR01, IR02, MTBF 596785 Hour, FIT 1.68.

20. Act_Mechanism Components

20.1 Click the “Act_Mechanism Components”.

20.2 BOMER_V01 >> Act_Mechanism components AM01, AM02, MTBF 406069 Hour, FIT 2.47.

21. Anti_Graviton_Act Components

21.1 Click the “Anti_Graviton_Act Components”.

21.2 BOMER_V01 >> Anti_Graviton_Act components AGA01, MTBF 753360 Hour, FIT 1.33.

22. Nervous_System Components

22.1 Click the “Nervous_System Components”.

22.2 BOMER_V01 >> Nervous_System components NS01, NS02, NS03, MTBF 1434347 Hour, FIT 0.70.

23. Organic_Muscles Components

23.1 Click the “Organic_Muscles Components”.

23.2 BOMER_V01 >> Organic_Muscles components OM01, OM02, MTBF 2881748 Hour, FIT 0.35.

24. Organic_Surface Components

24.1 Click the “Organic_Surface Components”.

24.2 BOMER_V01 >> Organic_Surface components OS01, OS02, MTBF 1724559 Hour, FIT 0.58.

25. Nano_Fast_CPU Components

25.1 Click the “Nano_Fast_CPU Components”.

25.2 BOMER_V01 >> Nano_Fast_CPU components NFC01, NFC02, MTBF 55236716 Hour, FIT 0.02.

26. Nano_Fast_ALU Components

26.1 Click the “Nano_Fast_ALU Components”.

26.2 BOMER_V01 >> Nano_Fast_ALU components NFA01, NFA02, MTBF 36283417 Hour, FIT 0.03.

27. Nano_Fast_RAM Components

27.1 Click the “Nano_Fast_RAM Components”.

27.2 BOMER_V01 >> Nano_Fast_RAM components NFR01, MTBF 31888873 Hour, FIT 0.03.

28. Nano_Fast_DISK Components

28.1 Click the “Nano_Fast_DISK Components”.

28.2 BOMER_V01 >> Nano_Fast_DISK components NFD01, NFD02, MTBF 17113178 Hour, FIT 0.06.

29. Micro_Compact_BOARD Components

29.1 Click the “Micro_Compact_BOARD Components”.

29.2 BOMER_V01 >> Micro_Compact_BOARD components MCB01, MTBF 112399964 Hour, FIT 0.01.

30. Sensors Components

30.1 Click the “Sensors Components”.

30.2 BOMER_V01 >> Sensors components S01, MTBF 876000 Hour, FIT 1.14.

31. Cameras Components

31.1 Click the “Cameras Components”.

31.2 BOMER_V01 >> Cameras components C01, MTBF 727079 Hour, FIT 1.38.

32. Decision_Support_Unit Components

32.1 Click the “Decision_Support_Unit Components”.

32.2 BOMER_V01 >> Decision_Support_Unit components DSU01, MTBF 2636760 Hour, FIT 0.38.

33. Decision_Evaluation_Unit Components

33.1 Click the “ Decision_Evaluation_Unit Components”.

33.2 BOMER_V01 >> Decision_Support_Unit components DEU01, MTBF 2058600 Hour, FIT 0.49.

34. 3D_Graphic_Laser_Scanner Components

34.1 Click the “3D_Graphic_Laser_Scanner Components”.

34.2 BOMER_V01 >> 3D_Graphic_Laser_Scanner components 3DG01, MTBF 3994559 Hour, FIT 0.25.

35. Electronic_Sonar_System Components

35.1 Click the “Electronic_Sonar_System Components”.

35.2 BOMER_V01 >> Electronic_Sonar_System components ESS01, MTBF 3994559 Hour, FIT 0.82.

36. BOMER_V01 System Tree Components

36.1 Click the “System Tree View”.

36.2 Click the “BOMER_V01” Tree Component.

36.3 A list of all system components (BOMER_V01), MTBF 85560 Hours, FIT 11.69

37. Share Product

37.1 Products from the list, click the “Share Product” icon.

37.2 Share Product section, you will see summary information about the product. After selecting the category then press "Share This Product" button.

37.3 "Create" section will be opened automatically. Here you want to change about products and product information, and you should add to "Component Information". Then press the “CREATE” button.

37.4 Finally, press the “I am accepting this declaration” button.

37.5 Share Product validation screen.

MTBF Calculator (Reliability Calculation System)

Documents

Transcript of MTBF Calculator (Reliability Calculation System)

Alternatives to MTBF

Green Star - Interiors Potable Water Calculator Guide · Heat Rejection Water 13 Calculation methodology 13 ... Green Star – Potable Water Calculator Guide --8 Date issued: 12 October

INTRODUCING THE HILL-RBF CALCULATOR Improved accuracy ... · The Hill-RBF Calculator is a purely data driven IOL calculation method incorporating artificial intelligence, pattern

Framework for Implementing Systems Engineering Measures … · Framework for Implementing Systems Engineering Measures at Technical ... MTBF (hours) Goal MTBF ... Rate of maturity

Calculator functions 1 WRAP 0966B. Calculator functions in WRAP Different calculation functions in different dialogues Geographical calculations General.

[organization name] MTBF and MTTR Downtime Dashboard KPI … · 2017. 10. 15. · [organization name] MTBF and MTTR Downtime Dashboard KPI MTBF MTBF Nov Corrective action ID ATI)

Honors Analysis. Fundamental Counting Principle Factorial Calculations (No Calculator!) Permutation Calculation (No Calculator!) Arrangement Problems.

Run-a-Way Speed and Ballast Drag Length Calculator Tools ... · Run-a-Way Speed and Ballast Drag Length Calculator Tools User Guide ... for the ballast drag length calculation. ...

Copia Di Lempor Ejector Calculator Beta 1.1 (Steam Ejctor Calculation)

USER GUIDE: Earned Grant Amount Calculator for Full · PDF fileUSER GUIDE: Earned Grant Amount Calculator for Full-time ... worksheet tab. ... calculation of earned grant amounts

Calculation Flow and Calculator

Mean down time MTBF MTBF + MDT - · PDF fileFieldbus PC must have high MTBF, this can be achieved by an individual power conditioner in order to achieve very high Availability

atmosfair Flight Emissions Calculator€¦ · 3 1 Introduction This text documents the details of atmosfair’s flight emission calculation program. atmosfair’s Emissions Calculator

Cisco Mttr e Mtbf

Chapter 20.3: Global Warming Reminder: Carbon Footprint Calculation due on Tues. 17th /calculator/?src=l12.

Mtbf Bcc 2010 11 Final

Customer lifetime value calculator, CLV calculation in ...

Mtbf Presentation

The Water Efficiency Calculator for new dwellings · The Water Efficiency Calculator for new dwellings The Government’s national calculation methodology for assessing water efficiency

APES Math You CAN do math without a calculator!. Types of Calculation Percent Change RateConversionsHalf-life Laws/ Rules.