Post on 08-Feb-2016
Memory Tools Catalogue
Omega Well Monitoring has one of the most comprehensive line-ups of memory based downhole monitoring tools available anywhere. Since 1992 we've specialized in designing and manufacturing highly accurate and resilient tools that have earned a global reputation for durability, innovation and ease of operation.
Our memory tools are available for a wide range of pressure and temperature requirements. Our Quartz tools are 0.75" and 1.25" in diameter while our Piezo-Resistive tools are available in 0.5", 0.75", 1.25" and 1.66" outside diameters. Primary applications include the Slickline, Stimulation, and DST markets.
Omega Well Monitoring Toll-free North America 1-866-815-3421 or (403) 232-1400, Fax (403) 232-1402 www.omegawell.com
#105, 1437 - 47th Avenue NE Calgary, Alberta, Canada T2E 6N7
Memory Tools
Description and specifications are subject to change without notice.
www.omegawell.com
20110215
Contents
Technology Forum
Introduction to Piezo-Resistive Sensors, p. 3 Introduction to Quartz Sensors, p. 5
Memory Tools
Application Matrix for Memory Tools, p. 6
Piezo Tools
Ultra Slimline, 0.5" OD, p. 7
Slimline Plus, 0.75" OD, p. 8 Slimline Plus, o.75 OD, 10 KSI Max Diff, p.9
Shortline Plus, 1.25" OD, p. 10
Shortline Plus, 1.25” OD, 25 KSI, p. 11
La Bomba Plus, 1.66 OD, Inconel 718, p. 12
La Bomba Plus, 1.66” OD, SS17-4, p. 13
Pressure Pilot Plus, 1.25" OD, p. 14
High Pressure Pilot Plus, 1.25”OD, p. 15
Frac Tool, p. 16*
Frac Tool Carriers, p. 17* Pulse Tool, 1.25” OD, p. 18
Pulse Tool, custom, 1.25” OD, p.19
Quartz Tools
Quartz, QM 200, 1.25" OD, p. 20
Quartz, QM 200 EX, 1.25" OD, p. 21
Quartz, QM 200 S, 0.75” OD, p. 22
Bomb Well Carrier, p.23
MLT300 (Mini Logging Tool), p. 24
Shut In Tool, p. 27
SLT300 (Surface Logging Tool, p.28
Batteries, p. 29
Contact Information, p. 30
*Page revised in this issue.
NOTES: The information published in this catalog is also available upon request in electronic format as a PDF file. If you are reading this document from a printed paper copy, please remember that the electronic version has the most up-to-date information and that in case of discrepancy between one and the other, that the electronic version shall prevail.
The information herein applies to current models only. To re-order parts for previously purchased items, consult the
documentation that came with the tool.
Trademark statement
Inconel® is a registered trademark of Special Metals Corporation.
Hastelloy® is a registered trademark of Haynes International, Inc.
Viton® is a registered trademark of DuPont Dow Elastomers.
PEEK is a trademark of ICI Americas, Inc.
The information contained in this catalog is the sole property of Omega Well Monitoring Ltd.
Any reproduction in whole or in part without the written permission of Omega Well Monitoring Ltd is prohibited.
Technology Forum
Description and specifications are subject to change without notice.
www.omegawell.com
20110215 INTRODUCTION TO PIEZO-RESISTIVE SENSORS
Advantages of Piezo-Resistive Sensors
The main advantage of the piezo-resistive sensor is its small size which leads to a fast response time and low cost.
Typical piezo-resistive sensor specifications include:
• Maximum temperature
• = 150ºC (300ºF) - standard sensor
• = 177ºC (350ºF) - standard sensor w/ Sleep Technology
• = 200ºC (400ºF) - SOI type sensor
• Pressure = up to 25,000 psi
• Accuracy = 0.05% full scale or better
• Resolution = 0.02 to 0.005 psi
• Drift = 3 psi to 20 psi per year (depending on the sensor type, temperature, and duration)
• Response time = Fast
• Cost = Low
Component Description
The piezo-resistive sensor has three main parts; the body, the diaphragm, and the sensing element.
• The body is the physical housing of the
sensor. With its glass feed-thru, the body is the barrier between the high-pressure environment and the tools' electronics.
• The diaphragm covers the body and protects the sensing element from the potentially harmful fluids in the sample environment. The diaphragm acts like a spring, transferring the pressure from the sample environment to the sensing element.
• The sensing element is classified into two main types:
• Standard silicon (SI) sensor - the most common sensing element
Silicon-on-insulator (SOI) - an emerging technology
A standard silicon sensing element has three main layers:
• A glass (or Pyrex) base
• A pure Silicon layer
• A semi-conducting or resistive layer (doped silicon)
A small cavity is etched into the pure silicon layer. This cavity allows the whole element to deform when external pressure is applied.
The semi-conducting layer is designed in a manner to create a Wheatstone bridge which is the measurement mechanism for the sensing element. The glass base acts as the foundation for the sensing structure.
Technology Forum
Description and specifications are subject to change without notice.
www.omegawell.com
0002-2007-02-23
Introduction to Piezo-Resistive Sensors (cont.)
As the external pressure increases, the drum-like sensing element flexes and stretches the semi-conducting layer, deforming the Wheatstone bridge and changing its resistance.
Hence, the resistance value of the Wheatstone bridge is proportional to the pressure applied to the sensing element.
A silicon-on-insulator type of sensing element is similar to the standard sensor except that a fourth insulating layer exists between the semi-conducting (Wheatstone bridge) layer and the pure silicon layer.
This insulating layer is usually silicon oxide (SiO2); however, sapphire has also been used with lesser results.
The advantage of the SOI type of element is its success at temperatures above 150°C (300°F). At this temperature the barrier in the standard element, between the semi-conducting layer and the silicon, begins to break down. The ions of the semi-conducting layer begin to drift into the silicon layer, permanently changing the resistance values of the Wheatstone
bridge.
However, when the semi-conducting layer is separated from the silicon by an insulating layer, this “leakage” is prevented.
It should be noted that the rate of resistance “leakage” is affected by two variables: the temperature, and the flow of electrons through the resistors. As the temperature increases the rate at which the breakdown occurs also increases.
If electrons are flowing through the resistors, the rate of degradation is more substantially increased.
The following scenarios help to put the SOI advantage into perspective:
• If a standard silicon element was only heated and
stored at 165°C, it would take approximately one
year for it to degrade beyond its specifications.
• If the sensor was at 165°C and it was also "turned
on" (electrons flowing through the resistors),
instead of lasting one year, the sensor would likely
be out of specification range after only one month.
• If the sensor was heated to 177°C, it would take
less than eight months to degrade.
• At 200°C, it is unlikely that the sensor would last
one month before being out of specification range.
The current disadvantage of the SOI type element is its performance below 150°C. The insulating silicon oxide layer is not a pure crystalline structure, and the crystalline sapphire alternative does not match up perfectly to silicon. This non-crystalline or mismatch structure creates an area for hysteresis to occur. This translates into diminished accuracy specifications in the lower temperature ranges when compared to a standard sensor.
The
Solution
To combat this degradation problem, Omega Well does not continuously sample or "turn on" the sensing element (we refer to this as "putting the tool in sleep mode").
Sleep mode significantly increases the life span of a standard piezo-resistive sensor at temperatures above 150°C, and it also helps to prolong battery life for the tool.
Technology Forum
Description and specifications are subject to change without notice.
www.omegawell.com
20110215 INTRODUCTION TO QUARTZ SENSORS
Advantages of Quartz Sensors
The three main advantages of the quartz sensor are its stability, accuracy, and temperature limit.
Characteristics
Typically, a quartz sensor has these characteristics:
Accuracy = 0.02% full scale
Resolution = 0.008 psi
Drift = Less than 3 psi per year
Response Time = Slow
Cost = Relatively high
Components
In a quartz sensor, the sensing element (shown below) is a micro-machined quartz crystal assembly.
Quartz crystal is a perfectly elastic material, yielding inherently stable and repeatable measurements. Quartz is also naturally piezo-electric. This attribute enables Canada Tech to resonate the oscillating membrane of the crystal assembly and measure the frequency of the resulting vibrations.
As the pressure increases, the assembly begins to flex around the oscillating membrane. This flexure induces tensile stresses in the membrane and changes the membrane's natural frequency of vibration.
Quartz is pure silicon that exhibits perfectly elastic behavior corresponding to low drift.
The only sources of drift come from the metallic interconnections and the bonding materials that hold the assembly together (the non-crystalline parts of the sensing assembly).
Frequency is measured with a much greater precision than any other parameter. This results in a sensor output with a high resolution.
The electronics used to measure vibration frequency are the limiting factor with regards to temperature limits.
The quartz sensor itself could withstand temperatures in excess of 400°F (200°C).
Memory Tools
Description and specifications are subject to change without notice.
www.omegawell.com
20110215 0B
0B 0B
0BAPPLICATION MATRIX
We offer a variety of memory tools to match just about any type of job that you might encounter down-hole.
Many of our tools can work in similar environments; the table below suggests which tool is suited for each application type.
Application
Appropriate Memory Tool(s)
Ultra Slimline
Slimline
Shortline
La Bomba
Pressure Pilot
Quartz, QM 200, 200EX, &
200S
Frac Tool
Mini Logging Tool
(MLT 300)
Pulse Tool
Surface Logger (SLT)
Casing leak detection �
Drill stem test � � � �
Frac monitoring � � � �
Gas lift mandrel
Gradient survey � � � � � �
H2S/CO2 corrosive � � � � � �
High temperature (200°C) �
Injection pressure monitoring � � � � �
Interference test �
Long duration data recording (> one year)
�
Multiple well surveys without reprogramming
� � � � � � � � �
Perforation monitoring � � � �
Plunger lift � �
Post stimulation evaluation � � �
Pressure build up test � � � � � � � � �
Pressure draw-down test �
Production monitoring and artificial lift control
� � � �
Production optimization � � � � � � � � � �
Pump monitoring �
Reservoir evaluation and well testing
� � � � � � � � �
Slickline operations � � � � � � � � �
Static, flowing and build-up surveys
� � � � � � � � �
Stimulation monitoring � � �
Temperature logging �
Well stimulations � � �
Memory Tools
Description and specifications are subject to change without notice.
www.omegawell,.com
20111026 0B
0B 0B
0BULTRA SLIMLINE, 0.5" OD
ULTRA SLIMLINE, 0.5" OD, KIT
Specifications
Pressure
Maximum external pressure
10 ksi
Sensor type Piezo-resistive
Accuracy ± 0.050% full scale
Long term stability 0.1% full scale
Drift < 3 psi per year
Resolution 0.0003 % full scale
Temperature
Maximum temperature
150ºC
Accuracy ± 0.6ºC
Repeatability ± 0.2ºC
Resolution 0.0001 % full scale
Power
Battery type 1/2 AAA Lithium
Operating Voltage 3.2 to 3.9 V
Memory
Sampling interval One second to one hour
Capacity 500,000 records
Record contents Time, pressure, temperature
This very small tool has big advantages...
• Piezo sensor • Fast response time
• Highly resistant to shock and vibration
• Low noise resulting in higher data quality
• Innovative design permits screwing two tools together without the need for an additional tandem adapter (saves time and money)
This NACE®-approved tool is contained in a welded housing and uses a welded transducer.
ULTRA SLIMLINE, 0.5" OD, HASTELLOY C-276
Pressure
(ksi)
Kit includes gauge, battery barrel, bullnose, nitrile backup and standard Viton o-rings.
125°C 150°C
Kit Gauge Kit Gauge
3 104675 104671 104663 102042
6 104676 104673 104669 103264
10 104677 104674 104670 103265
Accessories (customer-replaceable parts)
Description Part No.
BATTERY TESTER, 4 PIN LEMO, OVERMOLDED 107232
ULTRA SLIMLINE, 0.5" OD, BATTERY BARREL, HASTELLOY C-276 100512
ULTRA SLIMLINE, 0.5" OD, BULLNOSE, HASTELLOY C-276 100501
ULTRA SLIMLINE, 0.5" OD, SHIPPING CASE, ASSEMBLY 102049
USB, EMBEDDED DOWNLOAD CABLE, 4 PIN LEMO CONNECTOR 104311
Consumables
Description Part No.
BACKUP, 8-011, NITRILE, 90 DURO 102041
BACKUP, 8-011, CUSTOM, PEEK, SPLIT 100503
KOPR-KOTE 225 ML - BRUSH TOP 100409
O-RING, 2-011, CHEMRAZ 510, 90 DURO 102050
O-RING, 2-011, VITON, 90 DURO 100502
Lithium Battery Pack Description
Part No. Qty Type Voltage CAP (Ah) Temp (°C) OAL (inch) Connector
1 1/2 AAA 3.6 0.5 150 2.27 4 PIN LEMO 107742A
Memory Tools
Description and specifications are subject to change without notice.
www.omegawell.com
20120625 SLIMLINE, PLUS, 0.75" OD
SLIMLINE, PLUS, 0.75"OD, KIT
Specifications
Pressure
Maximum external pressure
25 ksi
Sensor type Piezo-resistive
Accuracy <± 0.050% full scale
Accuracy Typical ± 0.030% full scale
Long term stability 0.1% full scale
Drift < 3 psi per year
Resolution 0.0003 % full scale
Temperature
Maximum
temperature
177ºC
Accuracy ± 0.6ºC
Repeatability ± 0.2ºC
Resolution 0.0001 % full scale
Power
Battery type AA Lithium
Operating Voltage 3.2 to 3.9 V
Memory
Sampling interval 1/100s, 1/10s, ≥1s
Capacity 1,000,000 records
Record contents Time, pressure, temperature, battery voltage
SLIMLINE, PLUS, 0.75"OD, INCONEL 718
Pressure (ksi)
Kit includes gauge, battery barrel, bullnose, PEEK backup and standard Viton o-rings.
100°C 120°C 150°C 177°C
Kit Gauge Kit Gauge Kit Gauge Kit Gauge
0.75 106879 106846 106880 106847 - - - -
1.5 106881 106848 106882 106849 - - - -
3 106891 106860 106892 106861 - - - -
6 106893 106862 106894 106863 106895 106864 106896 106865
10 - - - - 106884 106852 106885 106853
15 - - - - 106886 106854 106957 106855
20 - - - - 106887 106856 106888 106857
25 - - - - 106889 106858 106890 106859
Accessories (customer-replaceable parts)
Description Part No.
SOUR SERVICE ADD-ON, PIEZO MEMORY TOOLS (FOR OVER 1% H2S)** 109438
BATTERY TESTER, 4 PIN LEMO, OVERMOLDED 107232
BOMB WELL CARRIER, 1.25" OD, FOR 2 x 0.75" OD GAUGES, 3/4"-16 AMERADA BOX X PIN 102185
SLIMLINE, 0.75" OD, BATTERY BARREL, EXTENDED, INCONEL 718 100063
SLIMLINE, 0.75" OD, BATTERY BARREL, INCONEL 718 100050
SLIMLINE, 0.75" OD, BULLNOSE, SS 17-4 100051
SLIMLINE, 0.75" OD, TANDEM ADAPTOR, SS 17-4 100053*
SLIMLINE, SHIPPING BOX ASSEMBLY 102343
SLIMLINE, SHIPPING CASE ASSEMBLY 102215
USB, EMBEDDED DOWNLOAD CABLE, 4 PIN LEMO CONNECTOR 104311
WRENCH, 11/16" 108437
* Used for connecting tools together;
** Does not include sour service battery barrel o-ring kit – order separately below
Consumables
Description Part No.
BACKUP, 8-014, PEEK, 30 DEG SPLIT, 0.630" OD X 0.530 ID 105188
FILTER, 0.590" OD X 0.081" THICK, ROUND, 200 MICRON, STAINLESS STEEL 100057
KOPR-KOTE 225 ML - BRUSH TOP 100409
SLIMLINE, O-RING AND BACK-UP KIT, VITON 90 DURO (STANDARD) 105333
SLIMLINE, O-RING AND BACK-UP KIT, KALREZ 7090 109439
Lithium Battery Pack Description (sorted on temperature)
Part No. Qty Type Voltage CAP (Ah) Temp (°C) OAL (inch) Connector
1 AA 3.6 2.1 85 2.98 4 PIN LEMO 102126A
1 AA 3.6 1.6 150 2.98 4 PIN LEMO 102127A
1 2 AA 3.6 3.8 150 5.225 4 PIN LEMO 102111A
1 AA 3.6 1.4 180 2.98 4 PIN LEMO 107838A
1 2 AA 3.6 2.8 180 5.225 4 PIN LEMO 107839A
Contact your Omega Well sales representative for dimensional data and other information on extended battery barrels, tandem adapters, shock absorbing carriers and custom configurations.
Memory Tools
Description and specifications are subject to change without notice.
www.omegawell.com
20120625 SLIMLINE, PLUS, 0.75" OD, 15 KSI MAX DIFF
SLIMLINE, PLUS, 0.75"OD, KIT, 15
KSI MAX DIFF
Specifications
Pressure
Maximum external pressure
25 ksi
Max. differential pressure
15 ksi
Sensor type Piezo-resistive
Accuracy <± 0.050% full scale
Accuracy Typical ± 0.030% full scale
Long term stability 0.1% full scale
Drift < 3 psi per year
Resolution 0.0003 % full scale
Temperature
Maximum temperature
177ºC
Accuracy ± 0.6ºC
Repeatability ± 0.2ºC
Resolution 0.0001 % full scale
Power
Battery type AA Lithium
Operating Voltage 3.2 to 3.9 V
Memory
Sampling interval 1/100s, 1/10s, ≥1s
Capacity 1,000,000 records
Record contents Time, pressure, temperature, battery voltage
SLIMLINE, PLUS, 0.75"OD, 15 KSI MAX DIFF, INCONEL 718
Pressure (ksi)
Kit includes gauge, battery barrel, bullnose, PEEK backup and standard Viton o-rings.
100°C 120°C 150°C 177°C
Kit Gauge Kit Gauge Kit Gauge Kit Gauge
10 - - 106867 106836 106868 106836 106869 106836
15 - - 106870 106833 106871 106833 106872 106833
20 - - 106873 106834 106874 106834 106875 106834
25 - - 106876 106835 106877 106835 106878 106835
Accessories (customer-replaceable parts)
Description Part No.
SOUR SERVICE ADD-ON, PIEZO MEMORY TOOLS (FOR OVER 1% H2S)** 109438
BATTERY TESTER, 4 PIN LEMO, OVERMOLDED 107232
BOMB WELL CARRIER, 1.25" OD, FOR 2 x 0.75" OD GAUGES, 3/4"-16 AMERADA BOX X PIN 102185
SLIMLINE, 0.75" OD, BATTERY BARREL, EXTENDED, INCONEL 718 100063
SLIMLINE, 0.75" OD, BATTERY BARREL, INCONEL 718 100050
SLIMLINE, 0.75" OD, SEAL NOSE, SS 17-4 (FOR MAX DIFF ONLY) 100065
SLIMLINE, 0.75" OD, TANDEM ADAPTER, 15K MAX DIFF, SS 17-4 102706
SLIMLINE, SHIPPING BOX ASSEMBLY 102343
SLIMLINE, SHIPPING CASE ASSEMBLY 102215
USB, EMBEDDED DOWNLOAD CABLE, 4 PIN LEMO CONNECTOR 104311
WRENCH, 11/16" 108437
* Used for connecting tools together.
** Does not include sour service battery barrel o-ring kit – order separately below
Consumables
Description Part No.
BACKUP, 8-014, PEEK, 30 DEG SPLIT, 0.630" OD X 0.530 ID 105188
FILTER, 0.590" OD X 0.081" THICK, ROUND, 200 MICRON, STAINLESS STEEL 100057
KOPR-KOTE 225 ML - BRUSH TOP 100409
SLIMLINE, O-RING AND BACKUP KIT, VITON 90 DURO (STANDARD) 105333
SLIMLINE, O-RING AND BACK-UP KIT, KALREZ 7090 109439
O-RING, 12mmx1.5mm, KALREZ 7090, 90 DURO (FOR SEAL NOSE) 109235
BACK-UP, 12mm x 1.5mm, PEEK, SPLIT (FOR SEAL NOSE) 100060
Lithium Battery Pack Description (sorted on temperature)
Part No. Qty Type Voltage CAP (Ah) Temp (°C) OAL (inch) Connector
1 AA 3.6 2.1 85 2.98 4 PIN LEMO 102126A
1 AA 3.6 1.6 150 2.98 4 PIN LEMO 102127A
1 2 AA 3.6 3.2 150 5.225 4 PIN LEMO 102111A
1 AA 3.6 1.4 180 2.98 4 PIN LEMO 107838A
1 2 AA 3.6 2.4 180 5.225 4 PIN LEMO 107839A
This version of the Slimline tool incorporates an O-ring and backup seal into the end of the transducer housing, allowing pressure to be ported straight to the transducer. The maximum pressure difference allowable between the outside of the housing and the ported pressure is 15,000 psi. Holes in the supplied Bullnose or Tandem adapter can be tapped to port pressure, a custom pressure porting sub can be supplied, or drawings can be provided to allow for a customer designed solution. This gauge can also be used to sense ambient pressure, like the standard Slimline tool. Contact your Omega Well sales representative for dimensional data and other information on extended battery barrels, tandem adapters, shock absorbing carriers and custom configurations.
Memory Tools
Description and specifications are subject to change without notice.
www.omegawell.com
20120625 SHORTLINE, PLUS, 1.25" OD
SHORTLINE, PLUS, 1.25"OD, KIT
Specifications
Pressure
Maximum external pressure
20 ksi with standard barrel
23 ksi with
extended barrel
Sensor type Piezo-resistive
Accuracy <± 0.050%full
scale
Accuracy Typical ± 0.030% full scale
Long term stability 0.1% full scale
Drift < 3 psi per year
Resolution 0.0003 % full scale
Temperature
Maximum
temperature
177ºC
Accuracy ± 0.6ºC
Repeatability ± 0.2ºC
Resolution 0.0001 % full scale
Power
Battery type C/CC Lithium
Voltage 3.2 to 3.9 V
Memory
Sampling interval 1/100s, 1/10s, ≥1s
Capacity 1,000,000 records
Record contents Time, pressure, temperature,
battery voltage
Accessories (customer-replaceable parts)
Description Part No.
SOUR SERVICE ADD-ON, PIEZO MEMORY TOOLS (FOR OVER 1% H2S)** 109438
BATTERY TESTER, 4 PIN LEMO, OVERMOLDED 107232
BOMB WELL CARRIER, 1.66" OD, FOR 2 X 1.25" SHORTLINE GAUGES, 5/8"SR BOX X PIN 102184
BOMB WELL CARRIER, 1.66" OD, FOR 2 x 1.25" SHORTLINE, 3/4-16 AMERADA, BOX X PIN 102183
SHORTLINE, 1.25" OD, BATTERY BARREL, EXTENDED INCONEL 718 100912
SHORTLINE, 1.25" OD, BATTERY BARREL, INCONEL 718 100077
SHORTLINE, 1.25" OD, BULLNOSE, SS 17-4 100079
SHORTLINE, 1.25" OD, TANDEM ADAPTER, SS 17-4 100080*
SHORTLINE, 1.25" OD, CROSSOVER SEALED, 0.25" NPT 100081
SHORTLINE, 1.25" OD, SHIPPING BOX, ASSEMBLY 102436
SHORTLINE, 1.25" OD, SHIPPING CASE, ASSEMBLY 102435
SHORTLINE, 1.25" OD, SHIPPING CASE ASSEMBLY, FOR 6 TOOL ASSEMBLIES 104536
USB, EMBEDDED DOWNLOAD CABLE, 4 PIN LEMO CONNECTOR 104311
WRENCH SET, 1.125" 104949
* Used for connecting tools together.
** Does not include sour service battery barrel o-ring kit – order separately below
Consumables
Description Part No.
BACKUP, 8-212, CUSTOM, PEEK, SPLIT, 0.922" ID X 1.130" OD 105226
FILTER, 0.590” OD X 0.081” THICK, ROUND, 200 MICRON, STAINLESS STEEL 100057
KOPR-KOTE 225 ML - BRUSH TOP 100409
SHORTLINE, 1.25" OD, O-RING KIT, VITON 90 DURO (STANDARD) 100738
SHORTLINE, 1.25" OD, O-RING KIT, KALREZ 7090 109436
Lithium Battery Pack Description (sorted on temperature)
Part No. Qty Type Voltage CAP (Ah) Temp (°C) OAL (inch) Connector
1 C 3.6 7.2 85 2.995 4 PIN LEMO 105081A
1 C 3.9 7.2 125 2.995 4 PIN LEMO 103365A
1 C 3.6 6 150 2.995 4 PIN LEMO 108501A
1 CC 3.6 13 150 5.100 4 PIN LEMO 102121A
1 CC 3.6 14 165 5.100 4 PIN LEMO 102994A
1 C 3.6 5 180 2.97 4 PIN LEMO 102117A
1 CC 3.6 11 180 5.100 4 PIN LEMO 105058A
Contact your Omega Well sales representative for dimensional data and other information on extended battery barrels, tandem adapters, shock absorbing carriers and custom configurations.
SHORTLINE, PLUS, 1.25"OD, INCONEL 718
Pressure (ksi)
Kit includes gauge, battery barrel, bullnose, PEEK backup and standard Viton o-rings.
100°C 120°C 150°C 177°C
Kit Gauge Kit Gauge Kit Gauge Kit Gauge
0.75 106813 106795 106814 106796 - - - -
1.5 106815 106797 106816 106798 - - - -
3 106824 106807 106825 106808 - - - -
6 106826 106809 106827 106810 106828 106811 106829 106812
10 - - - - 106817 106799 106818 106800
15 - - - - 106819 106801 106831 106802
20 - - - - 106820 106803 106821 106804
Memory Tools
Description and specifications are subject to change without notice.
www.omegawell.com
20120625 SHORTLINE, PLUS, 25 KSI, 1.25" OD
SHORTLINE, PLUS, 25 KSI 1.25"OD,
KIT
Specifications
Pressure
Maximum external pressure
28 ksi (high pressure barrel only)
Sensor type Piezo-resistive
Accuracy <± 0.050% full scale
Accuracy Typical ± 0.030% full scale
Long term stability 0.1% full scale
Drift < 3 psi per year
Resolution 0.0003 % full scale
Temperature
Maximum temperature
177ºC
Accuracy ± 0.6ºC
Repeatability ± 0.2ºC
Resolution 0.0001 % full scale
Power
Battery type SUB CC Lithium
Voltage 3.2 to 3.9 V
Memory
Sampling interval 1/100s, 1/10s, ≥1s
Capacity 1,000,000 records
Record contents Time, pressure, temperature, battery voltage
SHORTLINE, PLUS, 25 KSI 1.25"OD, INCONEL 718
Pressure
(ksi)
Kit includes gauge, battery barrel, bullnose, PEEK backup and standard Viton o-rings.
150°C 177°C
Kit Gauge Kit Gauge
25 106822 106805 106823 106806
Accessories (customer-replaceable parts)
Description Part No.
SOUR SERVICE ADD-ON, PIEZO MEMORY TOOLS (FOR OVER 1% H2S)** 109438
BATTERY TESTER, 4 PIN LEMO, OVERMOLDED 107232
BOMB WELL CARRIER, 1.66" OD, FOR 2 X 1.25" SHORTLINE GAUGES, 5/8"SR BOX X PIN 102184
BOMB WELL CARRIER, 1.66" OD, FOR 2 x 1.25" SHORTLINE, 3/4-16 AMERADA, BOX X PIN 102183
SHORTLINE, 1.25" OD, BATTERY BARREL, SUB CC, INCONEL 718 105515
SHORTLINE, 1.25" OD, BULLNOSE, SS 17-4 100079
SHORTLINE, 1.25" OD, TANDEM ADAPTER, SS 17-4 100080*
SHORTLINE, 1.25" OD, CROSSOVER SEALED, 0.25" NPT 100081
SHORTLINE, 1.25" OD, SHIPPING BOX, ASSEMBLY 102436
SHORTLINE, 1.25" OD, SHIPPING CASE, ASSEMBLY 102435
SHORTLINE, 1.25" OD, SHIPPING CASE ASSEMBLY, FOR 6 TOOL ASSEMBLIES 104536
USB, EMBEDDED DOWNLOAD CABLE, 4 PIN LEMO CONNECTOR 104311
WRENCH SET, 1.125" 104949
* Used for connecting tools together.
** Does not include sour service battery barrel o-ring kit – order separately below
Consumables
Description Part No.
BACKUP, 8-212, CUSTOM, PEEK, SPLIT, 0.922" ID X 1.130" OD 105226
FILTER, 0.590” OD X 0.081” THICK, ROUND 200 MICRON, STAINLESS STEEL 100057
KOPR-KOTE 225 ML - BRUSH TOP 100409
SHORTLINE, 1.25" OD, O-RING KIT, VITON 90 DURO (STANDARD) 100738
SHORTLINE, 1.25" OD, O-RING KIT, KALREZ 7090 102438
Lithium Battery Pack Description (sorted on temperature)
Part No. Qty Type Voltage CAP (Ah) Temp (°C) OAL (inch) Connector
1 SUB CC 3.6 10 150 5.03 4 PIN LEMO 105518
1 SUB CC 3.6 9 165 5.03 4 PIN LEMO 105519
1 SUB CC 3.6 6.2 200 5.03 4 PIN LEMO 105520
Contact your Omega Well sales representative for dimensional data and other information on extended battery barrels, tandem adapters, shock absorbing carriers and custom configurations.
Memory Tools
Description and specifications are subject to change without notice.
www.omegawell.com
20120626 LA BOMBA, PLUS, 1.66" OD, INCONEL 718
LA BOMBA, PLUS, 1.66" OD, INCONEL
718, KIT
Specifications
Pressure
Maximum external pressure
15 ksi
Sensor type Piezo-resistive
Accuracy <± 0.050% full scale
Accuracy Typical ± 0.030% full scale
Long term stability 0.1% full scale
Drift < 3 psi per year
Resolution 0.0003 % full scale
Temperature
Maximum temperature
177ºC
Accuracy ± 0.6ºC
Repeatability ± 0.2ºC
Resolution 0.0001 % full scale
Power
Battery type DD Lithium
Operating Voltage 3.2 to 3.9 V
Memory
Sampling interval 1/100s, 1/10s, ≥1s
Capacity 1,000,000 records
Record contents Time, pressure,
temperature, battery voltage
LA BOMBA, PLUS, 1.66" OD, INCONEL 718
Pressure (ksi)
Kit includes gauge, battery barrel, bullnose, PEEK backup and Kalrez 7090 o-rings.
100°C 120°C 150°C 177°C
Kit Gauge Kit Gauge Kit Gauge Kit Gauge
0.75 - - - - - - - -
1.5 - - - - - - - -
3 - - - - - - - -
6 - - - - - - 106771 106755
10 - - - - - - 106770 106754
15 - - - - - - - -
Accessories (customer-replaceable parts)
Description Part No.
SOUR SERVICE ADD-ON, PIEZO MEMORY TOOLS (FOR OVER 1% H2S)** 109438
BATTERY TESTER, 4 PIN LEMO, OVERMOLDED 107232
LA BOMBA, 1.66" OD, BATTERY BARREL, INCONEL 718 106674
LA BOMBA, 1.66" OD, BULLNOSE, INCONEL 718 106675
LA BOMBA, 1.66" OD, SHIPPING BOX ASSEMBLY 102431
LA BOMBA, 1.66" OD, SHIPPING CASE, ASSEMBLY 104467
LA BOMBA, 1.66" OD, TANDEM ADAPTER, SS 17-4 100100*
LA BOMBA, 1.66" OD, STRAINER, 1.25” NPT X 0.625” SUCKER ROD BOX, INCONEL 718 108281
USB, EMBEDDED DOWNLOAD CABLE, 4 PIN LEMO CONNECTOR 104311
WRENCH SET, 1.5" 104974
* Used for connecting tools together
** Does not include sour service battery barrel o-ring kit – order separately below
Consumables
Description Part No.
BACKUP, 8-125, CUSTOM, PEEK, SPLIT 105512
FILTER, 0.590” OD X 0.081” THICK, ROUND, 200 MICRON, STAINLESS STEEL 100057
KOPR-KOTE 225 ML - BRUSH TOP 100409
LA BOMBA, 1.66" OD, O-RING KIT, KALREZ 7090 (STANDARD) 109440
LA BOMBA, 1.66" OD, O-RING KIT, VITON 90 DURO 102421
Lithium Battery Pack Description (sorted on temperature)
Part No. Qty Type Voltage CAP (Ah) Temp (°C) OAL (inch) Connector
1 DD 3.6 35 125 6.035 4 PIN LEMO 102078A
1 DD 3.6 29 150 6.035 4 PIN LEMO 102079A
1 DD 3.6 24 180 6.035 4 PIN LEMO 102080A
Contact your Omega Well sales representative for dimensional data and other information on tandem adapters and custom configurations.
Memory Tools
Description and specifications are subject to change without notice.
www.omegawell.com
20120626 LA BOMBA, PLUS, 1.66" OD, SS17-4
LA BOMBA, PLUS, 1.66" OD, SS 17-4,
KIT
Specifications
Pressure
Maximum external pressure
15 ksi
Sensor type Piezo-resistive
Accuracy <± 0.050% full scale
Accuracy Typical ± 0.030% full scale
Long term stability 0.1% full scale
Drift < 3 psi per year
Resolution 0.0003 % full scale
Temperature
Maximum temperature
177ºC
Accuracy ± 0.6ºC
Repeatability ± 0.2ºC
Resolution 0.0001 % full scale
Power
Battery type DD Lithium
Operating Voltage 3.2 to 3.9 V
Memory
Sampling interval 1/100s, 1/10s, ≥1s
Capacity 1,000,000 records
Record contents Time, pressure,
temperature, battery voltage
LA BOMBA, PLUS, 1.66" OD, SS 17-4
Pressure (ksi)
Kit includes gauge, battery barrel, bullnose, PEEK backup and standard Viton o-rings.
100°C 120°C 150°C 177°C
Kit Gauge Kit Gauge Kit Gauge Kit Gauge
0.75 106772 106756 106773 106757 - - - -
1.5 106774 106758 106775 106759 - - - -
3 106780 106764 106781 106765 - - - -
6 106782 106766 106783 106767 106784 106768 106785 106769
10 - - - - 106776 106760 106777 106761
15 - - - - 106778 106762 106779 106763
Accessories (customer-replaceable parts)
Description Part No.
SOUR SERVICE ADD-ON, PIEZO MEMORY TOOLS (FOR OVER 1% H2S)** 109438
BATTERY TESTER, 4 PIN LEMO, OVERMOLDED 107232
LA BOMBA, 1.66" OD, BATTERY BARREL, SS 17-4 100097
LA BOMBA, 1.66" OD, BULLNOSE, SS 17-4 100099
LA BOMBA, 1.66" OD, SHIPPING BOX ASSEMBLY 102431
LA BOMBA, 1.66" OD, SHIPPING CASE, ASSEMBLY 104467
LA BOMBA, 1.66" OD, TANDEM ADAPTER, SS 17-4 100100*
LA BOMBA, 1.66" OD, STRAINER, 1.0” NPT X 0.625” SUCKER ROD BOX, SS316 106539
LA BOMBA, 1.66" OD, STRAINER, 1.25” NPT X 0.625” SUCKER ROD BOX, SS316 108280
LA BOMBA, 1.9" OD, STRAINER, 1.5” NPT X 0.625” SUCKER ROD BOX, SS316 106538
USB, EMBEDDED DOWNLOAD CABLE, 4 PIN LEMO CONNECTOR 104311
WRENCH SET, 1.5" 104974
* Used for connecting tools together
** Does not include sour service battery barrel o-ring kit – order separately below
Consumables
Description Part No.
BACKUP, 8-125, CUSTOM, PEEK, SPLIT 105512
FILTER, 0.590” OD X 0.081” THICK, ROUND, 200 MICRON, STAINLESS STEEL 100057
KOPR-KOTE 225 ML - BRUSH TOP 100409
LA BOMBA, 1.66" OD, O-RING KIT, CHEMRAZ 510, 90 DURO 102427
LA BOMBA, 1.66" OD, O-RING KIT, VITON 90 DURO (STANDARD) 102421
Lithium Battery Pack Description (sorted on temperature)
Part No. Qty Type Voltage CAP (Ah) Temp (°C) OAL (inch) Connector
1 DD 3.6 35 125 6.035 4 PIN LEMO 102078A
1 DD 3.6 29 150 6.035 4 PIN LEMO 102079A
1 DD 3.6 24 180 6.035 4 PIN LEMO 102080A
Contact your Omega Well sales representative for dimensional data and other information on tandem adapters and custom configurations.
Memory Tools
Description and specifications are subject to change without notice.
www.canadatech.com
20120611 PRESSURE PILOT, PLUS, 1.25" OD
PRESSURE PILOT, PLUS, 1.25” OD, KIT
Specifications
Pressure
Maximum external pressure
23 ksi
Sensor type Piezo-resistive
Accuracy <± 0.050% full scale
Accuracy Typical ± 0.030% full scale
Long term stability 0.1% full scale
Drift < 3 psi per year
Resolution 0.0003 % full scale
Temperature
Maximum temperature
177ºC
Accuracy ± 0.6ºC
Repeatability ± 0.2ºC
Resolution 0.0001 % full scale
Power
Battery type C/2C Lithium
Battery Life 1850hrs approx.
Operating Voltage 3.2 to 3.9 V
Memory
Sampling interval 1/100s, 1/10s, ≥1s
Capacity 1,000,000 records
Record contents Time, pressure, temperature, battery voltage
To save time and money, this tool is designed for use without a tandem adapter.
PRESSURE PILOT, PLUS, Inconel 718
Pressure (ksi)
Kit includes gauge, ‘C’ size battery carrier assembly, bullnose, metal crush ring,
PEEK backup and Viton o-rings.
150°C 177°C
Kit Gauge Kit Gauge
0.75 109412 109408 - -
1.5 109411 109407 - -
3 106934 106915 - -
6 106937 106918 - -
10 106926 106907 109409 109399
15 106928 106909 109410 109400
20 106930 106911 - -
Accessories (customer-replaceable parts)
Description Part No.
BATTERY TESTER, 4 PIN LEMO, OVERMOLDED 107232
SYMBIOTEC PILOT, 1.25" OD, BATTERY BARREL, INCONEL 718 (For C battery packs) 100107
SYMBIOTEC PILOT, 1.25" OD, BULLNOSE, SS 17-4 100109
SYMBIOTEC PILOT CARRIER ASSEMBLY, 1.25" OD (Same items as kit, no gauge) 101208
SYMBIOTEC PILOT, 1.25” OD, PRESSURE HOUSING, INCONEL 718 100113
FILTER, 0.590” OD X 0.081” THICK, ROUND, 200 MICRON, STAINLESS STEEL 100057
SYMBIOTEC PILOT, 1.25" OD, EXTENDED BATTERY BARREL (For CC battery packs) 100108
SYMBIOTEC PILOT, SHIPPING BOX, ASSEMBLY 104063
PILOT, PULSE TOOL, SHIPPING CASE, ASSEMBLY 102857
SYMBIOTEC PILOT, TORQUING SERVICE ASS001
USB, EMBEDDED DOWNLOAD CABLE, 4 PIN LEMO CONNECTOR 104311
WRENCH KIT, 150 FT LB TORQUE WRENCH, 3/4" HEX BIT, 1 1/8" OPEN WRENCH 104543
HIGH PRESSURE BARREL KIT FOR PILOT TOOLS* 108807
*When the backup metal seal is desired with lower pressure gauges, order this along with the desired gauge. Includes all high pressure pilot kit items except the gauge. Use only with AA battery packs from the high pressure pilot catalog page.
Consumables
Description Part No.
KOPR-KOTE 225 ML - BRUSH TOP 100409
SYMBIOTEC PILOT, O-RING AND CRUSH RING REDRESS KIT, KALREZ 7090 109421
SYMBIOTEC PILOT, O-RING AND CRUSH RING REDRESS KIT, VITON 90 102835
Lithium Battery Pack Description (sorted on temperature)
Qty Type Voltage CAP (Ah) Temp (°C) OAL (inch) Connector Part No.
1 C 3.6 7.2 85 2.995 4 PIN LEMO 105081A
1 C 3.9 7.2 125 2.995 4 PIN LEMO 103365A
1 C 3.6 6 150 2.995 4 PIN LEMO 108501A
1 C 3.6 5 180 2.995 4 PIN LEMO 102117A
1 CC 3.6 13 150 6.740 4 PIN LEMO 102122A
1 CC 3.6 14 165 6.740 4 PIN LEMO 102482A
1 CC 3.6 11 180 6.740 4 PIN LEMO 104793A
Memory Tools
Description and specifications are subject to change without notice.
www.omegawell.com
20120611 HIGH PRESSURE PILOT, PLUS, 1.25" OD
HIGH PRESSURE PILOT, PLUS, 1.25”
OD, KIT
Specifications
Pressure
Maximum external pressure
27.5 ksi
Sensor type Piezo-resistive
Accuracy <± 0.050% full scale
Accuracy Typical ± 0.030% full scale
Long term stability 0.1% full scale
Drift < 3 psi per year
Resolution 0.0003 % full scale
Temperature
Maximum temperature
150ºC
Accuracy ± 0.6ºC
Repeatability ± 0.2ºC
Resolution 0.0001 % full scale
Power
Battery type AA Lithium
Battery Life 475hrs approx.
Operating Voltage 3.2 to 3.9 V
Memory
Sampling interval 1/100s, 1/10s, ≥1s
Capacity 1,000,000 records
Record contents Time, pressure, temperature, battery voltage
To save time and money, this tool is designed for use without a tandem adapter.
HIGH PRESSURE PILOT, PLUS, Inconel 718, 25 KSI
Kit includes gauge, ‘AA’ size battery carrier assembly, bullnose, metal crush rings,
PEEK backup and Viton o-rings.
150°C
Kit Gauge
106897 106900
Accessories (customer-replaceable parts)
Description Part No.
BATTERY TESTER, 4 PIN LEMO, OVERMOLDED 107232
SYMBIOTEC PILOT, 1.25" OD, BATTERY BARREL, 27.5 KSI, INCONEL 718 104129
SYMBIOTEC PILOT, 1.25" OD, BULLNOSE, SS 17-4 100109
HIGH PRESSURE BARREL KIT FOR PILOT TOOLS (Same items as kit, no gauge) 108807
SYMBIOTEC PILOT, 1.25” OD, PRESSURE HOUSING, INCONEL 718 100113
FILTER, 0.590” OD X 0.081” THICK, ROUND, 200 MICRON, STAINLESS STEEL 100057
SYMBIOTEC PILOT, SHIPPING BOX, ASSEMBLY 104063
PILOT, PULSE TOOL, SHIPPING CASE, ASSEMBLY 102857
SYMBIOTEC PILOT, TORQUING SERVICE, 120 LB-FT ASS001
USB, EMBEDDED DOWNLOAD CABLE, 4 PIN LEMO CONNECTOR 104311
WRENCH KIT, 150 FT LB TORQUE WRENCH, 3/4" HEX BIT, 1 1/8" OPEN WRENCH 104543
Consumables
Description Part No.
KOPR-KOTE 225 ML - BRUSH TOP 100409
SYMBIOTEC PILOT TOOL, 1.25" OD, HIGH PRESSURE BATTERY BARREL, CRUSH RING* 104316
SYMBIOTEC PILOT, O-RING AND CRUSH RING REDRESS KIT, KALREZ 7090 109421
SYMBIOTEC PILOT, O-RING AND CRUSH RING REDRESS KIT, VITON 90 102835
*Not included in redress kits
Lithium Battery Pack Description (sorted on temperature)
Qty Type Voltage CAP (Ah) Temp (°C) OAL (inch) Connector Part No.
1 AA 3.6 2.1 85 2.98 4 PIN LEMO 102126A
1 AA 3.6 1.6 150 2.98 4 PIN LEMO 102127A
1 AA 3.6 1.4 180 2.98 4 PIN LEMO 107838A
Memory Tools
Description and specifications are subject to change without notice.
www.omegawell.com
20120625 FRAC TOOL PLUS
FRAC TOOL PLUS
Specifications
Pressure
Maximum external pressure
25 ksi*
Sensor type Piezo-resistive
Accuracy ± 0.050% full
scale
Long term stability 0.030% full scale
Drift < 3 psi per year
Resolution 0.0003 % full scale
Temperature
Maximum temperature
177ºC
Accuracy ± 0.6ºC
Repeatability ± 0.2ºC
Resolution 0.0001 % full scale
Power
Battery type AA Lithium
Operating Voltage 3.2 to 3.9 V
Memory
Sampling interval 1/100s, 1/10s, ≥1s
Capacity 1,000,000 records
Record Contents Time, pressure, temperature,
battery voltage
* For gauge assembly ONLY – see carrier drawing for carrier ratings.
The Frac Tool is a memory pressure sensor and carrier system. Designed as non-obtrusive, this system nonetheless retains the carrier's required burst and tensile strength. (See next page for carrier specifications.)
FRAC TOOL PLUS GAUGES, SS 17-4
How to order: Select a gauge, and add a screw kit and a battery barrel, and then choose a bullnose (external or internal), and the redress kit most appropriate to your needs. (Gauges include o-rings.)
Pressure (ksi) 150°C 177°C
3 106743 -
6 106744 -
10 - 106739
15 - 106740
20 - 106741
25 - 106742
Accessories (customer-replaceable parts)
Description Part No.
SOUR SERVICE ADD-ON, PIEZO MEMORY TOOLS (FOR OVER 1% H2S) 109438**
BATTERY TESTER, 4 PIN LEMO, OVERMOLDED 107232
FRAC TOOL 2.875" TORQUE WRENCH ASSEMBLY 102505
FRAC TOOL CARRIER ALUMINUM COVER 102092
FRAC TOOL SHIPPING BOX ASSEMBLY 102531
FRAC TOOL SHIPPING CASE ASSEMBLY 102524
FRAC TOOL, 2.875" OD, BATTERY BARREL, SS 17-4 100234
FRAC TOOL, 2.875" OD, BULLNOSE EXTERNAL PRESSURE, SS 17-4 100240
FRAC TOOL, 2.875" OD, BULLNOSE INTERNAL PRESSURE, SS 17-4 100237
FRAC TOOL, 2.875", SCREW KIT (ALLEN KEY AND 22 SCREWS) 103483
FRAC CARRIER PRESSURE TEST PLUG (STANDARD LENGTH GAUGE CUTOUT ONLY) 108742
USB, EMBEDDED DOWNLOAD CABLE, 4 PIN LEMO CONNECTOR 104311
FRAC TOOL, 2.875" OD BATTERY BARREL, EXTENDED 106971*
FRAC TOOL CARRIER, EXTENDED ALUMINUM COVER 106972*
FRAC TOOL, 2.875", SCREW KIT, FOR EXTENDED (ALLEN KEY AND 26 SCREWS) 107083*
FRAC TOOL, BOX OF SCREWS (100) 109384
*106971, 106972, 107083 FOR USE WITH EXTENDED CARRIER CUTOUT ONLY
** Does not include sour service battery barrel o-ring kit – order separately below
Consumables Description Part No.
BACKUP, 12 MM X 1.5 MM, PEEK, SPLIT 100060
FRAC TOOL, O-RING & BACK-UP KIT, VITON 90 DURO, SPLIT PEEK 102507
FRAC TOOL, O-RING & BACK-UP KIT, KALREZ 90 DURO, SPLIT PEEK, INTERNAL SENSING 109299
FRAC TOOL, O-RING & BACK-UP KIT, KALREZ 90 DURO, SPLIT PEEK, EXTERNAL SENSING 109301
KOPR-KOTE 225 ML - BRUSH TOP 100409
O-RING, 12 mm X 1.5 mm, VITON, 90 DURO 101061
O-RING, 2-009, VITON, 90 DURO 100243
O-RING, 12 mm x 1.5 mm, KALREZ 7090 109235
O-RING, 2-009, KALREZ 7090, 90 DURO 109300
Lithium Battery Pack Description (sorted on temperature)
Qty Type Voltage CAP (Ah) Temp (°C) OAL (inch) Connector Part No.
1 AA 3.6 2.1 85 2.98 4 PIN LEMO 102126A
1 AA 3.6 1.6 150 2.98 4 PIN LEMO 102127A
1 AA 3.6 1.4 180 2.98 4 PIN LEMO 107838A
1 2 AA 3.6 3.8 150 5.225 4 PIN LEMO 102111A*
1 2 AA 3.6 2.8 180 5.225 4 PIN LEMO 107839A*
*FOR USE WITH EXTENDED CARRIER AND BATTERY BARREL ONLY
Memory Tools
Description and specifications are subject to change without notice.
www.omegawell.com
20120604 FRAC TOOL CARRIERS
FRAC TOOL CARRIER
SHORT DRILLPIPE CARRIER
Our Frac Tool carriers are designed to be used with Casing, Drillpipe and Tubing strings. They can be custom made to a range of inside and outside diameters, and can be made from the oil industry standard steel alloys 4140 L80 and 4140 P110, as well as other materials for custom applications. As shown in the table below, we offer off-the-shelf carriers in standard overall lengths and diameters, with or without a fish neck, and with variations in the type of connector threads. In addition, we can custom build the Frac Tool carrier to customer specifications. Carriers can be specified to have internal or external sensing on one or more gauges, including gauges with extended battery barrels for increased sampling duration. See the table below for currently available carriers. Contact your Omega Well representative for additional information on these carriers, as well as custom applications.
NOTE: Internal and External sensing carriers must be used with the respective, correct bullnose. Extended carriers are only for use with extended battery barrel tools. Some collapse ratings based on maximum deflection at o-ring face seal for internal sensing applications.
Memory Tools
Description and specifications are subject to change without notice.
www.omegawell.com
20111026 PULSE TOOL, 1.25" OD
PULSE TOOL KIT
Specifications
Pressure
Pressure Range 100 psi to 30 ksi
Sensor type Piezo-resistive
Accuracy(>100psi) ± 0.10% FS
Resolution 0.0003% FS
Temperature
Maximum temp. 150ºC
Accuracy ± 1.0ºC
Repeatability ± 1.0ºC
Resolution 0.001% FS
Power
Battery type AA Lithium
Operating Voltage 3.2 to 4.6 V
Steady St. Current 1.63 mA / Sample
Peak Current 30 mA / Sample
Memory Size(Standard 500,000 Samples, Burst 2 Million Samples)
Total Burst Length Max Samples/Sec
2.3 Seconds 115,200
4.5 Seconds 57,600
9.1 Seconds 28,800
18 Seconds 14,400
36 Seconds 7,200
72 Seconds 3,600
145 Seconds 1,800
Capable of sampling at selectable rates up to 115,200 times per second, the pulse tool is ideal for perforating jobs. The fast sample rate is triggered in two ways: Level, is a pressure set point. Once that pressure level is reached the fast sample rate is enabled Window pressure describes a rate of pressure change set point. Once the pressure increases a set amount over a set period of time, the fast sample rate is enabled.
PULSE TOOL, Inconel 718
Pressure (ksi)
Kit includes gauge, battery barrel, bull nose, metal crush ring,
PEEK backup, Viton o-rings, USB download cable and shipping case.
150°C
Kit Gauge
30 103732 103268
Accessories (customer-replaceable parts)
Description Part No.
BATTERY TESTER, 4 PIN LEMO, OVERMOLDED 107232
PULSE TOOL, 1.25" OD, BATTERY BARREL, INCONEL 100227
PULSE TOOL, 1.25" OD, BULL NOSE, SS17-4 100223
PULSE TOOL, TANDEM ADAPTER, 1.25” OD, SS17-4 105080
SYMBIOTEC PILOT/PULSE/CBM TOOL, SHIPPING CASE, ASSEMBLY 102857
USB, EMBEDDED DOWNLOAD CABLE, 4 PIN LEMO CONNECTOR 104311
WRENCH, COMBINATION, 1.125" 102538
CROW FOOT, 1.125", 0.5" DRIVE 102539
TORQUE WRENCH, 0.5" DRIVE, 150 FT-LB 103826
Consumables
Description Part No.
PULSE TOOL, METAL SEAL RING HASTELLOY C-276 105775
BACK-UP, 8-018, PEEK, SPLIT 103267
BACK-UP, 8-018, VITON, 90 DURO 100318
O-RING, 2-018, VITON, 90 DURO 100067
PULSE TOOL, REDRESS KIT (CONTAINS ALL 4 ABOVE ITEMS) 100614
KOPR-KOTE 225 ML - BRUSH TOP 100409
GREASE, O-RING, DOW CORNING 55, 150G 100371
GREASE, HIGH TEMPERATURE, -40ºC TO 200ºC 105945
Lithium Battery Pack Description (sorted on temperature)
Qty Type Voltage CAP (Ah) Temp (°C) OAL (inch) Connector Part No.
1 AA 3.6 2.1 85 2.95 4 PIN LEMO 102126
1 AA 3.9 1.6 150 2.95 4 PIN LEMO 102127
Memory Tools
Description and specifications are subject to change without notice.
www.omegawell.com
20111026 PULSE TOOL, CUSTOM, 1.25" OD
PULSE TOOL KIT, CUSTOM
Specifications
Pressure
Maximum pressure 30 ksi (External)
Sensor type Piezo-resistive
Accuracy ± 0.10% full scale
Resolution 0.0003 % full scale
Temperature
Maximum temp. 177ºC
Accuracy ± 1.0ºC
Repeatability ± 1.0ºC
Resolution 0.001 % full scale
Power
Battery type AA Lithium
Operating Voltage 3.2 to 4.6 V
Steady St. Current 1.63 mA / Sample
Peak Current 30 mA / Sample
Memory
Sampling Interval 1/100s, 1/10s, ≥1s
Capacity 1,000,000 records
Record Contents Time, Pressure, Temperature,
Battery Voltage
The Custom pulse tool uses standard memory tool electronics to continuously sample at rates lower than the standard pulse tool. It is used as a high pressure replacement for Shortline memory tools. In applications not exceeding 25 KSI, a Shortline tool is recommended due to its higher accuracy.
PULSE TOOL, CUSTOM, Inconel 718
Pressure (ksi)
Kit includes gauge, battery barrel, bull nose, metal crush ring,
PEEK backup, Viton o-rings, USB download cable and shipping case.
150°C 177°C
Kit Gauge Kit Gauge
20 - - 106736 106734
25 - - 106737 106735
30 107143 107142 108310 108309
Accessories (customer-replaceable parts)
Description Part No.
BATTERY TESTER, 4 PIN LEMO, OVERMOLDED 107232
PULSE TOOL, 1.25" OD, BATTERY BARREL, INCONEL 100227
PULSE TOOL, 1.25" OD, BULL NOSE, SS17-4 100223
PULSE TOOL, TANDEM ADAPTER, 1.25” OD, SS17-4 105080
SYMBIOTEC PILOT/PULSE/CBM TOOL, SHIPPING CASE, ASSEMBLY 102857
USB, EMBEDDED DOWNLOAD CABLE, 4 PIN LEMO CONNECTOR 104311
WRENCH, COMBINATION, 1.125" 102538
CROW FOOT, 1.125", 0.5" DRIVE 102539
TORQUE WRENCH, 0.5" DRIVE, 150 FT-LB 103826
Consumables
Description Part No.
PULSE TOOL, METAL SEAL RING HASTELLOY C-276 105775
BACK-UP, 8-018, PEEK, SPLIT 103267
BACK-UP, 8-018, VITON, 90 DURO 100318
O-RING, 2-018, VITON, 90 DURO 100067
PULSE TOOL, REDRESS KIT (CONTAINS ALL 4 ABOVE ITEMS) 100614
KOPR-KOTE 225 ML - BRUSH TOP 100409
GREASE, O-RING, DOW CORNING 55, 150G 100371
GREASE, HIGH TEMPERATURE, -40ºC TO 200ºC 105945
Lithium Battery Pack Description (sorted on temperature)
Qty Type Voltage CAP (Ah) Temp (°C) OAL (inch) Connector Part No.
1 2 AA 3.6 3.8 150 5.225 4 PIN LEMO 102111A
1 2 AA 3.6 2.8 180 5.225 4 PIN LEMO 107839A
Memory Tools
Description and specifications are subject to change without notice.
www.omegawell.com
20111026 QUARTZ, QM200, 1.25" OD
QM200
Specifications
Pressure
Maximum
external pressure 23 ksi
Sensor type Quartz
Accuracy ±0.015% full scale
Drift 0.02% full scale per year
Resolution 10ksi < 0.006 psi/sec
16ksi < 0.008 psi/sec
20ksi < 0.008 psi/sec
25ksi < 0.010 psi/sec
Temperature
Maximum
temperature 200ºC
Accuracy ± 0.15ºC
Repeatability < 0.01ºC
Resolution < 0.005ºC per sec.*
Power
Battery type 2 CC Lithium
Operating voltage 3.2 to 3.9 V
Memory
Sampling interval One second to one hour
Capacity 1,000,000 samples in
sequential mode or 500,000 in redundant
memory mode
Record contents Time, pressure,
temperature
* Note: Temperature resolution scales directly with sample rate used.
The QM200 measures pressure and temperature and includes Omega Well’s replaceable 200°C memory module (part no. 101864).
CAUTION: Use of the memory module for more than three temperature cycles is not recommended by Omega Well. (One temperature cycle is defined as going from ambient temperature to above 165°C and back to ambient.)
QUARTZ QM200, 1.25" OD, INCONEL 718
Pressure (ksi)
Kit includes a calibrated module, memory module with 1M data points, battery barrel, bullnose, standard Viton o-rings, and PEEK back-up.
150°C 177°C 200°C
Kit Calibrated Module
Kit Calibrated Module
Kit Calibrated Module
10 101040 101039 - - - -
16 101473 101467 105057 101467 101862 101860
20 - - 101475 101469 101863 101861
25* - - 105137 104305 103263 103975
* Do not exceed maximum external pressure specifications of 23 ksi.
Accessories (customer-replaceable parts)
Description Part No.
BATTERY TESTER, 4 PIN LEMO, OVERMOLDED 107232
CONICAL COMPRESSION SPRING FOR BATTERY RETENTION 108578
QUARTZ "QM200", 1.25" OD, BATTERY BARREL, 1 "CC", INCONEL 718 102140
QUARTZ "QM200", 1.25" OD, BATTERY BARREL, 2 X "CC", INCONEL 718 100273
QUARTZ "QM200", 1.25" OD, BULLNOSE 101037
QUARTZ "QM200", 1.25" OD, CROSSOVER TO DST 104732
QUARTZ "QM200-1M", 0.875" OD, REPLACEABLE MEMORY MODULE, 200°C MAX 101864
QUARTZ "QM200-2M", 0.875" OD, REPLACEABLE MEMORY MODULE, 185°C MAX 107028
QUARTZ "QM200", 1.25" OD, SHIPPING CASE, ASSEMBLY 101980
QUARTZ "QM200", 1.25" OD, TANDEM ADAPTER 101038*
TORQUE KIT, 80 FT LB TORQUE WRENCH, 17 MM CROWFOOT 105221
USB, EMBEDDED DOWNLOAD CABLE, 4 PIN LEMO CONNECTOR 104311
* Used for connecting tools together; one tandem adapter is free with the purchase of two gauges.
Consumables
Description Part No.
BACK-UP, 8-212, CUSTOM, PEEK, SPLIT, 0.922" ID X 1.130" OD 105226
FITTING, REMOVABLE SEAL CONE, AUTOCLAVE M-250-C 105194
KOPR-KOTE 225 ML - BRUSH TOP 100409
O-RING, 2-212, VITON, 75 DURO 100688
O-RING, 2-212, VITON, 90 DURO 100356
O-RING, 2-212, AFLAS, 80 DURO 100687
O-RING, 2-212, CHEMRAZ 510, 90 DURO 100208
Lithium Battery Pack Description (sorted on Temperature)
Qty Type Voltage CAP (Ah) Temp (°C) OAL (inch) Connector Part No.
1 CC 3.6 13 150 5.10 4 PIN LEMO 102121A
1 CC W/SPACER 3.6 13 150 10.75 4 PIN LEMO 102934A
1 2 CC 3.6 26 150 10.75 4 PIN LEMO 102932A
1 CC 3.6 14 165 5.10 4 PIN LEMO 102294A
1 CC W/SPACER 3.6 14 165 10.75 4 PIN LEMO 108594
1 2 CC 3.6 28 165 10.75 4 PIN LEMO 101059A
1 CC 3.6 11 180 5.10 4 PIN LEMO 105058A
1 CC W/SPACER 3.6 11 180 10.75 4 PIN LEMO 108595
1 2 CC 3.6 22 180 10.75 4 PIN LEMO 106274A
1 CC 3.6 9 200 5.10 4 PIN LEMO 102119A
1 CC W/SPACER 3.6 9 200 10.75 4 PIN LEMO 102933A
1 2 CC 3.6 18 200 10.75 4 PIN LEMO 101925A
Memory Tools
Description and specifications are subject to change without notice.
www.omegawell.com
20111026 QUARTZ, QM200EX, 1.25" OD
QM200EX
Specifications
Pressure
Max. external
pressure 23 ksi
Sensor type Quartz
Accuracy ± 0.015% full scale
Drift 0.02% full scale per year
Resolution 5ksi <0.006 psi/sec
10ksi <0.006 psi/sec
16ksi <0.008 psi/sec
20ksi <0.008 psi/sec
25ksi <0.010 psi/sec
Temperature
Maximum
temperature 200ºC
Accuracy ± 0.15ºC
Repeatability < 0.01ºC
Resolution < 0.005ºC per sec.*
Power
Battery type 2 CC Lithium
Operating voltage 3.2 to 3.9 V
Current 2.8 mAh per sample
Battery life Eight days at 125°C sampling at two second intervals
(temp.-dependent)
Memory
Sampling interval One second to one
hour
Capacity 1,000,000 samples
in sequential mode or 500,000 in redundant memory
mode
Record contents Time, pressure,
temperature
* Note: Temperature resolution scales
directly with sample rate used.
The QM200EX measures pressure and temperature and includes Omega Well’s replaceable 200°C memory module (part no. 105583). The QM200EX upgrades from the QM200 by incorporating a locking connector on the battery, dual PEEK backups on the battery barrel, and a one inch fish neck.
CAUTION: Use of the memory module for more than three temperature cycles is not recommended by Omega Well. (One temperature cycle is defined as going from ambient temperature to above 165°C and back to ambient.)
QUARTZ QM200EX, 1.25" OD, INCONEL 718
Pressure (ksi)
Kit includes a calibrated module, memory module with 1M data points, battery barrel, bullnose, dual PEEK backups and standard Viton o-rings.
150°C 177°C 200°C
Kit Calibrated Module
Kit Calibrated Module
Kit Calibrated Module
5 105603 105593 - - - -
10 105594 105585 - - - -
16 - - 105597 105587 105598 105588
20 - - 105599 105589 105600 105590
25* - - 105601 105591 105602 105592
* Do not exceed maximum external pressure specifications of 23 ksi.
Accessories (customer-replaceable parts)
Description Part No.
BATTERY TESTER, 4 PIN AMPHENOL, 8 SHELL, OVERMOLDED 107234
FITTING, REMOVABLE SEAL CONE, AUTOCALVE M-250-C 105194
QUARTZ "QM200EX-1M", 0.875" OD, REPLACEABLE MEMORY MODULE, 200°C MAX 105583
QUARTZ "QM200EX-2M", 0.875" OD, REPLACEABLE MEMORY MODULE, 185°C MAX 107029
QUARTZ "QM200EX", 1.25" OD, BATTERY BARREL, 2 X "CC", INCONEL 718 105577
QUARTZ "QM200EX", 1.25" OD, BULLNOSE 105580
QUARTZ "QM200EX", 1.25" OD, SHIPPING CASE, ASSEMBLY 105609
QUARTZ "QM200EX", 1.25" OD, TANDEM ADAPTER 105581*
SIMULATOR, QUARTZ TOOL ASSEMBLY 103201
TORQUE KIT, 80 FT LB TORQUE WRENCH, 17 MM CROWFOOT 105221
USB, EMBEDDED DOWNLOAD CABLE, 4 PIN AMPHENOL CONNECTOR 105646
* Used for connecting tools together; one tandem adapter is free with the purchase of a set of two gauges.
Consumables
Description Part No.
BACK-UP, 8-210, CUSTOM, PEEK, SPLIT, 1.009" OD X 0.108" WIDTH 105605
BACKUP, 8-212, CUSTOM, PEEK, SPLIT, 0.901" ID X 0.114" WIDTH 105644
KOPR-KOTE 225 ML - BRUSH TOP 100409
O-RING, 2-210, CHEMRAZ 510, 90 DURO 105647
O-RING, 2-210, VITON, 90 DURO 100726
O-RING, 2-212, CHEMRAZ 510, 90 DURO 100208
O-RING, 2-212, VITON, 90 DURO 100356
Lithium Battery Pack Description (sorted on Temperature)
Qty Type Voltage CAP
(Ah)
Temp (°C) OAL
(inch)
Connector Part No.
1 2 CC 3.6 26 150 10.525 4 PIN AMPHENOL 105642A
1 2 CC 3.6 28 165 10.525 4 PIN AMPHENOL 105641A
1 2 CC 3.6 22 180 10.525 4 PIN AMPHENOL 105640A
1 2 CC 3.6 18 200 10.525 4 PIN AMPHENOL 105637A
Memory Tools
Description and specifications are subject to change without notice.
www.omegawell.com
20120530 QUARTZ, QM200S, 0.75" OD
QM200S
Specifications
Pressure
Max. external pressure
25 ksi
Sensor type Quartz
Accuracy ± 0.015% full scale
Drift 0.02% full scale per
year
Resolution 10ksi <0.006 psi/sec
16ksi <0.008 psi/sec
20ksi <0.008 psi/sec
25ksi <0.010 psi/sec
Temperature
Maximum temperature
200ºC
Accuracy ± 0.15ºC
Repeatability < 0.01ºC
Resolution < 0.005°C per sec.*
Power
Battery type 2 AA Lithium
Operating voltage 3.2 to 3.9V
Current 2.8 mAh per sample
Battery life Eight days at 125°C sampling at two
second intervals
(temp.-dependent)
Memory
Sampling interval One second to one
hour
Capacity 1,000,000 samples in sequential mode
or 500,000 in redundant memory mode
Record contents Time, pressure,
temperature
* Note: Temperature resolution scales
directly with sample rate used.
The QM200S measures pressure and temperature and includes Omega Well’s replaceable 200°C memory module. With a 0.75” OD, it can be run in applications not available to the original QM200. By being smaller, the QM200S has a faster response. The QM200S improves on the QM200 design by incorporating a locking connector and dual PEEK back-ups.
CAUTION: Use of the memory module for more than three temperature cycles is not recommended by Omega Well. (One temperature cycle is defined as going from ambient temperature to above 165°C and back to ambient.)
QUARTZ QM200S, 0.75” OD, INCONEL 718, 200°C
Pressure (ksi)
Kit includes a calibrated module, memory module with 1M data points, battery barrel, bullnose, and standard Viton o-rings with PEEK back-up.
150°C 177°C 200°C
Kit Calibrated Module
Kit Calibrated Module
Kit Calibrated Module
10 100900 101834 - - - -
16 100901 101835 100902 101836 - -
20 - - 100903 101837 105853 105854
25* - - 100904 103449 105866 105865
* Do not exceed maximum external pressure specifications of 25 ksi.
Accessories (customer-replaceable parts)
Description Part No.
QUARTZ "QM200S", 0.75" OD, TANDEM ADAPTER, SS 17-4 100021*
QUARTZ, "QM200S", 0.75" OD, CROSSOVER 0.25" NPT, SS 17-4 103482
QUARTZ, "QM200S", 0.75" OD, CROSSOVER HF4, INCONEL 718 105856
QUARTZ "QM200S", 0.75" OD, BATTERY BARREL, INCONEL 718 105832
QUARTZ "QM200S", SHIPPING CASE, ASSEMBLY 104522
QUARTZ, "QM200S-1M", REPLACEABLE MEMORY MODULE, 200° MAX 105850
QUARTZ, "QM200S-2M", REPLACEABLE MEMORY MODULE, 185°C MAX 107030
QUARTZ "QM200S", 0.75" OD, BULLNOSE, SS316 100020
WRENCH, 5/8" *2 REQUIRED 101996
BATTERY TESTER, 4 PIN LEMO, OVERMOLDED 107232
USB, EMBEDDED DOWNLOAD CABLE, 4 PIN LEMO CONNECTOR 104311
* Used for connecting tools together; one tandem adapter is free with the purchase of a set of two gauges.
Consumables
Description Part No.
QUARTZ "QM200S", 0.75" OD, O-RING REDRESS KIT, KALREZ 7090, 90 DURO 109403
QUARTZ "QM200S", 0.75" OD, O-RING REDRESS KIT, VITON 90 DURO 103492
Lithium Battery Pack Description (sorted on Temperature)
Qty Type Voltage CAP (Ah)
Temp (°C) OAL (inch)
Connector Part No.
1 2 AA 3.6 2.8 165 6.05 4 PIN LEMO 107840A
1 2 AA 3.6 2.4 180 6.05 4 PIN LEMO 107841A
1 2 AA 3.6 3.0 200 6.05 4 PIN LEMO 105906A
Memory Tools
Description and specifications are subject to change without notice.
www.omegawell.com
20110215 BOMB-WELL CARRIERS, 1.25" AND 1.66" OD
BOMB WELL CARRIERS
Bomb-well carriers provide added mechanical protection to memory tools.
The combination of spring and o-ring chord absorbs energy and reduces the shocks and vibrations encountered in the working environment.
To protect against aggressive chemicals, bomb-well carriers can be filled with an inhibiting fluid. (A combination of grease and fluid can act as a buffer between the gauges and the well bore fluids.)
(Omega Well recommends the use of Dow Corning 55 grease (Part No. 100371) and regular transmission fluid.)
BOMB WELL CARRIERS
OD Use With Box /Pin Part No.
1.25" 2 x 0.75" OD SLIMLINE GAUGES 3/4" 16 AMERADA 102185
1.66" 2 x 1.25" OD SHORTLINE GAUGES 3/4" 16 AMERADA 102183
1.66" 2 x 1.25" OD SHORTLINE GAUGES 5/8" SR 102184
1.25” 2 X 0.75” OD SLIMLINE GAUGES 3/4" 16 AMERADA 104606
1.66” 2 X QM 200EX GAUGES 5/8" SR 106060
1.0” 2 X QM 200S GAUGES 9/16” 12 AMERADA 106067
1.25” 2 X QM 200S GAUGES 5/8” SR 106074
1.25” 2 X SLIMLINE GAUGES 5/8” SR 106359
Accessories (customer-replaceable parts)
Description Part No.
BOMB WELL CARRIER, 1.66" OD, FOR 2 EXTENDED BATTERY BARREL SHORTLINE, 3/4" - 16 AMERADA, BOX/PIN
104604
BOMB WELL CARRIER, 1.66" OD, FOR 2 EXTENDED BATTERY BARREL SHORTLINE, 5/8" SR BOX/PIN
104605
SHORTLINE, 1.25" OD, TANDEM ADAPTER, SS 17-4 100080*
SLIMLINE, 0.75" OD, TANDEM ADAPTER, SS 17-4 100053*
BOMB WELL CARRIER, VIBRATION DAMPER PLUG, 1.25" OD, SS 316 106094
BOMB WELL CARRIER, VIBRATION DAMPER PLUG, 0.75" OD, SS 316 106095
* Used for connecting tools together; one tandem adapter is free with the purchase of a set of two gauges.
Consumables
Description Part No.
BOMB WELL CARRIER, 1.25" OD, RE-DRESS KIT, W/ O-RING CORD 103414
BOMB WELL CARRIER, 1.66" OD, RE-DRESS KIT, W/ O-RING CORD 103415
GREASE, O-RING, DOW CORNING 55, 150 G 100371
BOMB WELL CARRIER, 1.66" OD, RE-DRESS KIT, W/O O-RING CORD 104718
BOMB WELL CARRIER, 1.25" OD, RE-DRESS KIT, W/O O-RING CORD 104719
BOMB WELL CARRIER, 1.25" OD, RE-DRESS KIT, W/O O-RING CORD, REGULAR BATTERY BARREL
104720
BOMBWELL CARRIER, REDRESS KIT, 1.66" OD, 2 X QM200EX 106226
BOMBWELL CARRIER, REDRESS KIT, 1.0" OD AND 1.25" OD, 2 X QM200S 106227
Memory Tools 20111026 MLT300 (MINI LOGGING TOOL) 1.5” OD
Description and specifications are subject to change without notice. www.omegawell.com
MINI LOGGING TOOL
MLT300, 1.50" KIT, INCONEL 718
Pressure (KSI) Temperature Part No.
Kit includes a memory module, CCL, temperature module, pressure and flow module, caged spinner, battery barrel, and shipping case.
25* 177°C 106173
*Dependent on Pressure and Flow Gauge selected, purchased separately.
MLT Specifications
Pressure
Maximum External Pressure
25 ksi
Sensor Piezo Resistive
Accuracy ± 0.050% full scale
Long Term Stability
0.1% full scale
Drift less than 3 psi per year
Resolution 0.0003% full scale
Temperature
Sensor Dual Platinum Resistant Temperature Detector
Maximum Temperature
177ºC
Accuracy ± 0.1ºC
Repeatability ± 0.05ºC
Resolution 0.0001% full scale
CCL
Sensor Electromagnetic Casing Collar Locator
Spinner
Minimum
Flow Rate 8 ft/min
Maximum Flow Rate
500 ft/min
Output 12 counts/revolution
Power
Battery type CC Lithium
Voltage 3.2 – 3.6 VDC
Current 15 – 20 mA
Memory
Sample Rate 0.1 sec to 1.82 hr
Record Contents
Time/pressure/
temperature/ collars/spinner*
Capacity 1,800,000 records*
Program Segments
31
*As configured in 106173
The Mini Logging Tool (MLT) is a
compact version of a production
logging tool. It is designed to be a
modular tool, with three main
modules being the platinum
Resistant Temperature Detector
(RTD) module, the Casing Collar
Locator (CCL) module and the
Pressure/Flow module.
The unique dual platinum RTDs
provide a fast response and high
resolution temperature profile
along the wellbore.
The electromagnetic CCL measures
depth by measuring the change in
electromagnetic field that occurs
at each casing, or tubing collar.
The Pressure/Flow module has a
universal external housing.
Different gauges are inserted into
the external housing, depending
on what pressure range the tool
will be encountering.
The MLT uses a replaceable
memory module. This memory
module is connected to the
uppermost module within the
string. Modules can be
interchanged, allowing for the
memory module to be changed out
and a second survey to be
performed with a new memory
module, while the first one is
downloaded.
Any combination of modules can
be used at one time. The only
restraint is that only one
Pressure/Flow module can be used
at once, and it must be run at the
bottom of the string.
Memory Tools 20111026 MLT300 (MINI LOGGING TOOL) 1.5” OD
Description and specifications are subject to change without notice. www.omegawell.com
MLT300 Module Assemblies
MODULE Part No.
MLT300, MEMORY MODULE 106142
MLT300, CCL ASSEMBLY, 1.50" OD 106145
MLT300, TEMPERATURE MODULE, ASSEMBLY, 1.50" OD
106153
MLT300, PRESSURE AND FLOW MODULE ASSEMBLY, 1.50" OD, INCONEL 718
106174
MLT300, Pressure and Flow Gauges
Pressure (KSI) Temperature Part No.
6 120°C 106175
10 120°C 106176
15 120°C 106177
20 120°C 106178
25 120°C 106179
6 177°C 106180
10 177°C 106181
15 177°C 106182
20 177°C 106183
25 177°C 106184
Accessories (customer-replaceable parts)
Description Part No.
MLT300, BATTERY BARREL, DRILLED, 1.50" OD,
INCONEL 718 106293
MLT300, 1.5" OD, SHIPPING CASE, ASSEMBLY 106500
MLT, 1.5" OD, BULLNOSE, SS 316 100259
MLT300, 1.50" OD, BULLNOSE, ASSEMBLY, NO PRESSURE/FLOW, INCONEL 718
106489
USB, EMBEDED DOWNLOAD CABLE, 4 PIN
AMPHENOL 105646
BATTERY TESTER, WITH ADAPTER FOR 4 PIN AERO CONNECTOR
106711
MLT300, TOOL KIT, WRENCHES, PULLING TOOL, AND SNAP RING PLIERS
106721
Consumables
Description Part No.
MLT300, 1.50" OD, MODULE O-RING REDRESS KIT, VITON 90 DURO
106712
MLT300, 1.50" OD, MODULE O-RING REDRESS KIT, KALREZ 7090
106713
MLT300, 1.50" OD, PRESSURE FLOW GAUGE REDRESS KIT, VITON 90 DURO
106714
MLT300, 1.50" OD, PRESSURE FLOW GAUGE REDRESS KIT, KALREZ 7090
106715
Lithium Battery Packs
Qty Type Voltage CAP (Ah) Temp (°C) OAL (inch) Connector Part No.
1 CC 3.6 13 150 6.205 4 PIN AMPHENOL 106144A
1 CC 3.6 14 165 6.205 4 PIN AMPHENOL 106261A
1 CC 3.6 11 180 6.205 4 PIN AMPHENOL 106260A
Memory Tools 20111026 MLT300 (MINI LOGGING TOOL) 1.5” OD
Description and specifications are subject to change without notice. www.omegawell.com
CAGED SPINNER
Caged Spinner Specifications
Threshold Average 8 Ft/Min in clear water
Maximum Flow Rate
500 Ft/Min
Output 6 Pulses/Revolution
Maximum Temperature
177 ºC
Maximum Pressure
25 KSI
Accuracy 0.125 RPS
Caged Spinner Description Part No.
MLT300, 1.50", CAGED SPINNER, ASSEMBLY
106598
Consumables Description Part No.
MLT300, CAGED SPINNER, 1.50" OD,
BEARING AND SPACER KIT, HIGH TEMP 106717
MLT300, CAGED SPINNER, 1.50" OD, REDRESS KIT, HIGH TEMP
106718
MLT300, CAGED SPINNER, 1.50" OD, BEARING AND SPACER KIT, LOW TEMP
106719
MLT300, CAGED SPINNER, 1.50" OD, REDRESS KIT, LOW TEMP
106720
MLT300, TOOL KIT, WRENCHES, PULLING
TOOL, AND SNAP RING PLIERS 106721
Memory Tools 20111026 MLT300 (MINI LOGGING TOOL) 1.5” OD
Description and specifications are subject to change without notice. www.omegawell.com
FULL BORE SPINNER
Caged Spinner Specifications
Threshold
Average 8fpm in Clear Water. 2.6 fpm at Approx. 5.2ft/min² flowing
acceleration
Maximum Flow Rate
500ft/Min. 28000bpd in 7" casing
Output 6 Pulses/Revolution
Maximum Temperature
177 ºC
Maximum Pressure
25 KSI
Accuracy 0.125 RPS
Casing Range 4-1/2" to 7"
The full bore spinner has a spring loaded cage to center
the spinner and support tool weight in deviated wells.
Signal from the zero drag hall effect sensor is read by the
MLT pressure and flow module.
Full Bore Spinner Description Part No.
MLT300, 7", FULL BORE SPINNER, ASSEMBLY
107909
MLT300, 5.5", FULL BORE SPINNER, ASSEMBLY
108857
MLT300, 5", FULL BORE SPINNER, ASSEMBLY
108859
MLT300, 4.5", FULL BORE SPINNER, ASSEMBLY
108861
Consumables Description Part No.
MLT300, BEARING AND SPACER KIT 108896
MLT300, 7" CFB REDRESS KIT. 108897
MLT300, 5.5", 5", 4.5" CFB REDRESS KIT. 108898
MLT300, 7" IMPELLER ASSEMBLY 108908
MLT300, 5.5" IMPELLER ASSEMBLY 108909
MLT300, 5" IMPELLER ASSEMBLY 108910
MLT300, 4.5" IMPELLER ASSEMBLY 108911
MLT300, 7" BOW SPRING 107897
MLT300, 5.5", 5", 4.5" BOW SPRING 108701
Wireless Tools
Description and specifications are subject to change without notice.
www.omegawell.com
20120809 SLT300 (SURFACE LOGGING TOOL)
SLT300, KIT, STANDARD
Specifications
Pressure
Maximum pressure
25 ksi*
Sensor type Piezo-resistive
Accuracy ± 0.05% full scale**
Long term stability 0.1% full scale
Drift < 3 psi per year
Resolution 0.0003 % full scale
Temperature
Maximum temperature
80ºC
Minimum temperature
-40ºC
Accuracy ± 1.0ºC
Repeatability ± 0.2ºC
Resolution 0.0001 % full scale
Power
Battery type D Lithium
Voltage 3.6 V – 3.9 V
Battery life 1 year***
Wireless
Sampling interval One second to five hours
Range 100 meters line of sight
Record contents Time, pressure, temperature
Memory
Memory type SD Card
The SLT300 is Piezo sensor gauge used in surface pressure applications. It transmits data wirelessly to a computer using the ZigBee protocol as well as displays and records the data. This wireless tool is ideal for many high priority applications where cables are undesirable. The Gauges are interchangeable with the Logger Assembly.
• Wireless Transmission
• Swappable SD Card
• Ultra efficient Display
• Low noise resulting in higher data quality
• Multi-gauge capable
Accessories (customer-replaceable parts)
Description Part No.
TORQUE KIT, 80FT LB TORQUE WRENCH, 0.875” CROW FOOT 106497
USB CABLE, USB A TO MINI B, 1 METER 104052
SLT300, SHIPPING CASE ASSEMBLY 106411
HIP FITTING, CROSSOVER, HF4 X ¼” NPT MALE, SS 316 106415
HIP FITTING, CROSSOVER, HF4 X 3/8” NPT MALE, SS 316 106416
HIP FITTING, CROSSOVER, HF4 X 1/2” NPT MALE, SS 316 106417
HIP FITTING, CROSSOVER, HF4 X 3/4” NPT MALE, SS 316 106418
HIP FITTING, CROSSOVER, HF4 X 1” NPT MALE, SS 316 106419
DONGLE, OMEGA WELL WIRELESS RECIEVER, USB 106435
SD MEMORY CARD, INDUSTRIAL, 1GB, 85°C 106681
WRENCH, SLIM, 0.875” 106493
WRENCH, SLIM, 1.625” 106494
ALLEN HEX KEY, 1/16” 106495
SET SCREW, #6-32 X 3/16”, SOCKET SET, DOG POINT 105977
USB, EMBEDDED DOWNLOAD CABLE, 6 PIN AMPHENOL CONNECTOR**** 105967
Note: one shipping case can contain one complete assembly, and up to 4 separate gauges.
Consumables
Description Part No.
O-RING, 2-026, VITON, 75 DURO 106232
O-RING, REPLACEMENT FOR KILLARK ENCLOSURE 106410
Lithium Battery Pack Description Part No.
Qty Type Voltage CAP (Ah) Temp (°C) Chemistry
2 D 3.6 36 85 Lithium 107219
* Based upon Gauge selected
**Based upon -30ºC to 80ºC Temperature Range
***Based upon 30 second sample rate and the screen flashing on for 5 seconds
****Used to set up Wireless Functions
SLT300, SS 316, -40°C to 80°C
Pressure (ksi)
Kit includes Gauge, Logging assembly, SD Card, Setscrew, Min USB Cable and HNBR
O-ring.
KIT GAUGE
0.75 107618 106395
1.5 107619 106396
3 107620 106397
6 107621 106398
10 107622 106420
15 107623 106399
20 107624 106400
25 107625 106401
Memory Tools 20111026
BATTERIES
Description and specifications are subject to change without notice.
www.omegawell.com
We offer a variety of lithium batteries designed to best match the environment in which a tool will be used.
Contact Information 20110414
Description and specifications are subject to change without notice.
www.omegawell.com
1BCONTACTS
Omega Well has an office in Calgary, Alberta, Canada and numerous agents worldwide to help you find the right product and information to meet your needs.
2BCanadian Office
Omega Well Monitoring
#105, 1437 - 47th Avenue NE
Calgary, AB T2E 6N7
Canada
Contact: Director of Sales
Email: info@canadatech.com
Web: www.omegawell.com
Tel: +1 403 232 1400
Toll-free tel.: +1 866 815 3421
Fax: +1 403 232 1401
3BWorldwide Agents
Location Agent Contact Information
China Omega Well China China
Contact: Inside Sales
Email: info@canadatech.com
Web: www.omegawell.com
Tel.: +1 403 232 1400
Fax: +1 403 232 1401
Europe, Central / Southeast Reimann-Oil Tools Ltd & Co. KG
Bundesstr. 24
D-21382 Brietlingen
Germany
Contact: Dieter Reimann
Email: info@reimann-oil-tools.com
Web: www.reimann-oil-tools.com
Tel.: +49 (0) 4133-22 54 944
Latin America / Mexico Omega Well Contact: Inside Sales
Email: info@canadatech.com
Web: www.omegawell.com
Tel.: +1 403 232 1400
Fax: +1 403 232 1401
Malaysia & Brunei CE Resources Sdn. Bhd. Lot 2318, 1st Floor, Bulatan Commercial Center
Jalan Datuk Mulp
98000 Miri, Sarawak, Malaysia
Contact: Anthony Young
Email: cersb@streamyx.com
Web: www.cersb.com
Tel.: +6 085 650 366
North Africa Algar Oil Services P.O. B 82466
Tripoli
Libya
Contact: Hakeim Hamidat
Email: ahhamidat@algar-oilservices.com
Web: www.algar-oilservices.com
Tel.: 00218 21 360 8055
Mobile: 00218 91 218 5266
United Arab Emirates Basin Supply Corporation JAFZA View 18 & 19, 1st floor
Jebel Ali Free Zone
P.O Box: 262746
Dubai, UAE
Main: +971 4 813-7772
Web: www.basinsupply.com
Contact Information 20110414
Description and specifications are subject to change without notice.
www.omegawell.com
Worldwide Agents (continued)
USA (Gulf Region) Down Hole Pressure Inc. 408 North Eola Road
Broussard, Louisiana 70518
USA
Contact: Bruce Broussard
Email: bruceb@xspedius.net
Web: www.downholepressure.com
Tel.: +1 337 837 2755
USA (other areas) Canada Tech Contact Canada Tech directly:
Toll-free tel.: +1 866 815 3421