Post on 03-Apr-2018
www.frasaco.comwww.frasaco.com
Modelling realityThere’s only one thing closer to reality than frasaco’s phantom heads, jaw and teeth models and strip-crowns, and that’s the real thing itself.
�
�contents
dental models
standard working model ANA-4 5 – 11
standard working model AG-3 13 – 19
standard working model A-3 21 – 25
pediatric dentistry 26 – 29
preparation and endodontic exercises 31 – 33
implantology and surgery 34 – 41
edentulous models and dental laboratory 42 – 44
dental hygiene and periodontology 45 – 49
orthodontics, extraction, injection, x-ray 50 – 53
demonstration models 54 – 55
phantom heads
characteristics of our phantom heads 58
phantom head P-6/3 59
phantom head P-6/5 59
accessories for P-6/3 and P-6/5 60 – 61
low cost phantom heads 62 – 63
complete sets 64 – 65
mounting assemblies 66 – 67
dental training systems 68 – 73
sundries
strip crowns 75 – 79
pedodontal strip crowns 80
matrix strips and dispensers 81
polishing bands and dispensers 82
general commercial conditions 83
www.frasaco.com
�
www.frasaco.dewww.frasaco.de
dental modelsworking and demonstration models
frasaco offers the most comprehensive range of dental simulators, study models and training models for hands-on practice in pre-clinical and post-graduate students' laboratories in preventive and operative dentistry as well as fixed, removable and full prosthodontics, pediatric dentistry and orthodontics, radiology and anesthesia, endodontics, exodontia and oral surgery, oral hygiene, periodontology, gerodontology and implantology, pathology, anatomy and dental technique.
�
�
ANA-4
ANKA-4
ANA-4 V
ANKA-4 V
ANA-4 DAV
ANA-4 V DAV
ANKA-4 DAV
ANKA-4 V DAV
standard working model ANA-4
Dental model representing typical natural adult dentition:Model base made from a hard thermosetting plastic material. Upper and lower jaws occlude in a definite central occlusion with natural physiological contact points. 28 model teeth made of hard thermosetting plastic material are securely positioned in the model with Philips head screws. ANA-4 dental models come with a threaded metal back plate for screw retention or optional retention with a magnetic mounting plate in frasaco phantom heads.
• Anatomical crown and occlusal contours based on the function and morphology of natural teeth • Natural occlusal contour based on a representative cross section of different distinctive contour characteristics• Anterior tooth contours are aesthetic and functional • Natural anatomical cervical root contour • Neutral intercuspidation according to the international classification of Angle Class I • Physiological interproximal space contoured according to the average dentition of a middle-aged adult • Wilson, Spee and helicoid curves 3 dimensionally reproduced • Option of performing different dynamic occlusion concepts like canine guidance or unilateral group function • Replica gingiva with natural palatal folds, buccal and lingual anatomical simulation Gingiva: elastic, removable gingiva
Main use: Universal model for realistic exercises in preventive, conservative and prosthetic dentistry.
upper and lower model jaws in a stable intercuspidation (28 teeth)
same upper and lower model jaws in a stable intercuspidation as ANA-4, model teeth however not fixed with screws, but with the new frasaco click system (28 click-in teeth)
upper and lower model jaws in a stable intercuspidation similar to ANA-4 (28 teeth), however contours of the gingivae are simplified for easier preparations
as ANA-4 V, model teeth however not fixed with screws, but with the new frasaco click system (28 click-in teeth)
upper and lower model jaws combined with an adjustable demon-stration articulator of unique design allowing simple functional movements
as ANA-4 DAV, however with simplified gingival contours
same upper and lower model jaws combined with a demonstration articulator as ANA-4 DAV, model teeth however not fixed with screws, but with the new frasaco click system (28 click-in teeth)
as ANKA-4 DAV, however with simplified gingival contours
dent
al m
odel
s
www.frasaco.de
�
1260
1260K OK
1260K UK
AG-3 SMS OK
AG-3 SMS UK
AN-4 WOK
AN-4 WOK KR
AN-4 WOK 99-001
AN-4 WOKV
AN-4 WUK
AN-4 WUK KR
AN-4 WUK 99-001
AN-4 WUKV
AN-4 KPS
AN-4 SPS
accessories for ANA-4
standard model mounting plates for fixing dental models with thread in frasaco phantom headsupper jaw model mounting plate with positioning pins for fixing dental models with thread in frasaco phantom heads. The positioning pins allow for interchanging of model jaws in reproducible position
lower jaw model mounting plate with positioning pins for fixing dental models with thread in frasaco phantom heads. The positioning pins allow for interchanging of model jaws in reproducible position
upper jaw magnetic model mounting plate for frasaco phantom heads with positioning pins allowing rapid and repeated interchanging of model jaws in reproducible position
lower jaw magnetic model mounting plate for frasaco phantom heads with positioning pins allowing rapid and repeated interchanging of model jaws in reproducible position
elastic replacement gingiva for upper jaw, positioned over the model base, held in place by the model teeth, suitable for ANA-4 OK.
as above, however in red – transparent execution
as above, however in hard plastic execution
as above, however in simplified execution
elastic replacement gingiva for lower jaw, positioned over the model base, held in place by the model teeth, suitable for ANA-4 UK.
as above, however in red – transparent execution
as above, however in hard plastic execution
as above, however in simplified execution
www.frasaco.com
set of click-in plates for changing over existing ANA-4 or ANA-4 V screw-in models to the new frasaco click system
set of screw-in plates for changing over existing models with frasaco click system to the traditional screw retention system e.g. for exam situations
�
�
ANA-4 Z
ANA-4 ZE 100
ANA-4 ZE 010
ANA-4 ZP..
ANKA-4 ZP..
ANA-4 ZK..
ANKA-4 ZK
SZ-4
SZ-3
ANKA-4 Z
ANKA-4 ZE 100
ANKA-4 ZE 010
standard teeth, special teeth and preparations
dent
al m
odel
sset of 28 model teeth in natural design with screws, execution in hard thermosetting plastic material to fit ANA-4 models
Bag containing 100 individual model teeth of the same position in natural design with screws to fit ANA-4 models
Bag containing 10 individual model teeth of the same position in natural design with screws to fit ANA-4 models
Please request our order form for teeth
For ANA-4 models frasaco can offer teeth with special preparations according to customers’ specification. Please let us know the required quantities together with your master preparation cut on an ANA-4 ZE standard tooth
same as ANA-4 ZP.., however fitting the new frasaco click system models
for model bases ANA-4 we offer model teeth with undermining caries. A precise description of all currently available caries teeth and positions will be supplied upon request. In addition to these we are offering custom made caries teeth. Please let us know the quantities required and send us an ANA-4 ZE model tooth with your specific caries preparation as a sample.
same as ANA-4 ZK, however fitting the new frasaco click system models
www.frasaco.com
Screwdriver for Philips head screws as used in frasaco models series AN
Screwdriver with torque limitation for Philips head screws as used in frasaco models series AN. Comfortable and even fastening of the model screws is guaranteed by the built-in torque limitation, prevents over tightening of the screws. Please request manufacturers’ addres-ses for products we have tested for this application.
set of 28 model teeth in natural design, execution in hard thermo-setting plastic material to fit the new frasaco click system models ANKA-4 and ANKA-4 V bag containing 100 individual model teeth of the same position in natural design to fit the new frasaco click system models ANKA-4 and ANKA-4 Vbag containing 10 individual model teeth of the same position in natural design to fit the new frasaco click system models ANKA-4 and ANKA-4 V
�
ANA-4 ZSD
ANKA-4 ZSD
ANA-4 ZAT
ANKA-4 ZAT
ANA-4 ZSDP
ANKA-4 ZSDP
ANA-4 ZEF
ANKA-4 ZEF
UV-L
ANA-4 ZFK17
ANKA-4 ZFK17
ANA-4 ZSDK
ANKA-4 ZSDK
special teeth and preparations
model teeth with enamel-dentine simulationsensible hardness differential between enamel and dentineuppers 21, 24, 26lower 46same as ANA-4 ZSD, however fitting the new frasaco click system models
model teeth for adhesive restoration exercises with etching geluppers 21, 24, 26lower 46same as ANA-4 ZAT, however fitting the new frasaco click system models
model teeth with enamel-dentine-pulp simulation anatomically de-signed enamel, dentine and pulp layers sensible hardness differential between enamel and dentine, red pulp showing through if approached too closely during preparationuppers 21, 24, 26lower 46
same as ANA-4 ZSDP, however fitting the new frasaco click system models
www.frasaco.comwww.frasaco.com
For examinations:model teeth made of fluorescent material with screws, optional assort-ment. These patent protected, newly developed exam teeth can easily be distinguished from standard model teeth while staying fixed in the jaw model by means of an ultraviolet-lamp
exclusively delivered directly to the institutional examination committeessame as ANA-4 ZEF, however fitting the new frasaco click system models
ultraviolet-testing lamp for easy identification of ANA-4 ZEF exam teeth
upper 17 model tooth series ANA-4 ZE with pit and fissures caries please let us have your inquiry for custom made pit and fissure caries positions
same as ANA-4 ZFK 17, however fitting the new frasaco click system models
similar to ANA-4 ZSD (enamel-dentine simulation), however with undermining caries upper 21 approximal, upper 24 mesial and distal, upper 26 occlusal and lower 46 occlusal and distalsame as ANA-4 ZSDK, however fitting the new frasaco click system models
�
�
ANA-4 ZEE
ANKA-4 ZEE
ANA-4 ZSDPK
ANKA-4 ZSDPK
ANA-4 ZATK
ANKA-4 ZATK
AN-4 ZP
AN-4 ZPE
ANA-4 G
dent
al m
odel
s
special teeth and preparations, rubber moulds
www.frasaco.com
model teeth fitting ANA-4 model bases, with screws, simulating the situation after root canal treatment of incisors, premolars and molars, access holes are sealed with guttapercha. Suitable for training the making of direct and indirect posts with plastic or non-plastic (metal-lic) materials.
same as ANA-4 ZEE, however fitting the new frasaco click system models
Our range of model teeth series ANA-4 ZE / ANKA-4 ZE for endodontic exercises please find on page 33.
similar to ANA-4 ZSDP (enamel-dentine-pulp), however with under-mining caries upper 21 approximal, upper 24 mesial and distal, upper 26 occlusal und lower 46 occlusal and distalsame as ANA-4 ZSDPK, however fitting the new frasaco click system models
similar to ANA-4 ZAT (for adhesive restoration), however with under-mining caries upper 21 approximal, upper 24 mesial and distal, upper 26 occlusal and lower 46 occlusal und distal.same as ANA-4 ZATK, however fitting the new frasaco click system models
transparent centric plate with four guidance pins, fixing screw and fixing plate with M6 mounting thread, to be placed upon the rubber mould. Models cast from rubber moulds can be mounted in frasaco phantom heads or articulators. Package containing: 1 centric plate, 1 fixing screw, 5 fixing plates.
re-fill pack containing 10 fixing plates
rubber moulds for casting plaster study models, suitable for ANA-4 series. Partially dentate models can be created by blocking – out segments
�
AN-4 TWOK 100 AN-4 TWOK 101 AN-4 TWOK 102AN-4 TWOK 105
ANA-4 TOK 100ANA-4 TOK 101ANA-4 TOK 102ANA-4 TOK 105
www.frasaco.comwww.frasaco.com
partially dentate models
partially dentate upper model jaw, execution in hard thermosetting plastic material, elastic removable gingiva model teeth are securely fastened in the model with Philips head screws.
accordingly partially dentate upper model jaws ANKA-4 TOK … are available with model teeth fixed with the new frasaco click system
The following models are available ex stock:
elastic removable gingiva for upper jaw, positioned over the model base, held in place by the model teeth suitable for ANA-4 TOK
7 6 5 4 3 | 3 7 7 6 4 3 2 1 | 1 3 4 5 6 7 5 4 3 2 1 | 1 2 3 4 7 7 5 4 3 2 1 | 1 2 3 4 5 7
7 6 5 4 3 | 3 7 7 6 4 3 2 1 | 1 3 4 5 6 7 5 4 3 2 1 | 1 2 3 4 7 7 5 4 3 2 1 | 1 2 3 4 5 7
�0
��
AN-4 TWUK 201AN-4 TWUK 207AN-4 TWUK 218AN-4 TWUK 231AN-4 TWUK 232
ANA-4 TUK 201ANA-4 TUK 207ANA-4 TUK 218ANA-4 TUK 231ANA-4 TUK 232
dent
al m
odel
s
www.frasaco.com
partially dentate models
elastic removable gingiva for lower jaw, positioned over the model base, held in place by the model teeth suitable fo ANA-4 TUK
partially dentate lower model jaw, execution in hard thermosetting plastic material, elastic removable gingiva model teeth are securely fastened in the model with Philips head screws. accordingly partially dentate lower model jaws ANKA-4 TUK … are available with model teeth fixed with the new frasaco click system
The following models are available ex stock:
7 6 5 4 3 2 1 | 1 2 3 4 5 7 5 4 3 | 3 4 5 7 3 | 3 5 4 3 2 1 | 1 2 3 4 5 3 2 1 | 1 2 3 4 7
7 6 5 4 3 2 1 | 1 2 3 4 5 7 5 4 3 | 3 4 5 7 3 | 3 5 4 3 2 1 | 1 2 3 4 5 3 2 1 | 1 2 3 4 7
��
��
AG-3
AG-3 28
AG-3 DA
AG-3 DAD 16AG-3 DAD 16 K
D-16D-16 K
DA
dent
al m
odel
s
www.frasaco.com
standard working model AG-3
standard working model AG-3Dental Models with permanent dentition: Models made of hard thermosetting plastic material. Upper and lower jaws are occluding in a stable intercuspidation. Incl. 32 screw-in teeth in hard thermosetting material and mounting thread for frasaco phantom heads.
Occlusal anatomy corresponding to an adolescent patient free of any abrasion
* Anterior relationship: deep overbite, initial anterior and canine guidance* Premolar to first molar region: tooth relationship = 1 : 2 * Second and third molar region: tooth relationship = 1 : 1 distally
Gingivae: elastic removable gingivae. Used mainly for exercises in preventive and conservative dentistry and prosthodontia emphasi-zing functional occlusion.
upper and lower model jaws in a stable intercuspidation (32 teeth)execution in hard thermosetting plastic material with elastic removable gingivae
upper and lower model jaws in a stable intercuspidation (28 teeth)execution in hard thermosetting plastic material with elastic removable gingivae
upper and lower model jawscombined in a demonstration articulator allowing simple functional movements
support with dental model AG-3 DAhinged support with dental model AG-3 DA for different treatment positions
support onlyhinged support only
demonstration articulatorfor fixation to all frasaco dental models
��
AG-3 S
AG-3 SMS OK AG-3 SMS UK
AG-3 WOK
AG-3 WUK
AG-3 ROKAG-3 RUK
AG-3 ROKM
AG-3 RUKM
SZ-1
SZ-2
accessories for AG-3
www.frasaco.com
snap-on model mounting plate (pair) with 3 positioning lugs and mounting thread for frasaco phantom heads for rapid interchanging of model jaws in reproducible position magnetic model mounting plates for frasaco phantom heads for rapid and repeated interchanging of model jaws. The model jaws have to be equipped with a back plate with metal disk (see AG-3 ROKM, AG-3 RUKM)
elastic removable gingiva for upper jaw, positioned over the model base, held in place by the model teeth. suitable for AG-3 OK
elastic removable gingiva for lower jaw, positioned over the model base, held in place by the model teeth suitable for AG-3 UK
back plate for AG-3 OK model jawback plate for AG-3 UK model jaw the perforation of the back plate is to be punched and left on the model jaw when fixed to the frasaco phantom head
back plate with metal disk for magnetic fixation of AG-3 OK model jaw
back plate with metal disk for magnetic fixation of AG-3 UK model jaw
Screwdriver with plastic screw grip. Note: Please do not remove the plastic screw grip from the tip of the screwdriver, as it avoids slipping off the screw head and makes fastening of the model teeth easier.
Screwdriver with torque limitation.Comfortable and even fastening of the model screws is guaranteed by the built-in torque limitation, no more overtightening of the screws. Please request manufacturers' adresses for products we have tested for this application.
��
��
AG-3 Z
AG-3 Z 28
AG-3 ZE
AG-3 ZPI
AG-3 ZPTK
AG-3 ZPEMAG-3 ZPFAG-3 ZPPAG-3 ZPSAG-3 ZPV
AG-3 ZPVK
standard teeth and preparations
dent
al m
odel
s
www.frasaco.com
set of 32 gnathologically contoured model teeth with screws in hard thermosetting material to fit AG-3 modelsset of 28 gnathologically contoured model teeth with screws in hard thermosetting materia to fit AG-3 modelsindividual gnathologically contoured model teeth with screwsoptional assortment
please request our order form for teeth
inlay preparations for the premolar and molar region are available for the following teeth:with occlusal-distal cavity: upper 17 and lowers 45, 47with mesial, occlusal-distal cavity: uppers 14, 25 and lower 34with mesial-occlusal and occlusal-palatal cavity: upper 26with mesial-occlusal cavity: upper 27 and lower 37 a precise description of the various preparation types will be supplied upon request
partial crown preparations available for the following teeth:upper 16 (overlay)uppers 15, 23 (pinledge)upper 24lowers 35, 36lowers 44, 46
a precise description of the various preparation types will be supplied upon request
special preparations available for the following teeth:
upper 21 surface mesial, palatal (tooth with broken corner)upper 11 fracturedupper 13 Pinledgeupper 22 twistedupper 12 veneer crown with caries stain
a precise description of the different preparation types is available upon request.
complete crown preparations available for the following teeth:
uppers 11 through 17uppers 21 through 27lowers 33 through 37lowers 41, 43 through 47
a precise description of the various preparation types will be supplied upon request
��
AG-3 ZSDP
AG-3 ZAT
AG-3 ZKA
AG-3 ZSDPKN
AG-3 ZATKN
AG-3 ZEG
AG-3 ZEF
UV-L
AG-3 ZKN
special teeth
www.frasaco.comwww.frasaco.com
model teeth with enamel-dentine-pulp simulation anatomically designed enamel, dentine and pulp layers sensible hardness differential between enamel and dentine,red pulp showing through if approached too closely during preparation uppers 21, 24, 26, lower 46
model teeth for adhesive restoration exercises with etching geluppers 21, 24, 26, lower 46
caution: not suitable for crown preps. and MODpreps.
model tooth with undermining caries in the approximal contact area. Only small cavitations are visible from outside, inside the tooth a carious cavity has developped. upper 13
same as AG-3 ZSDP (enamel-dentine-pulp), however with undercut caries: upper 21 approximal, upper 24 mesial and distal, upper 26 occlusal and lower 46 occlusal and distal
same as AG-3 ZAT (for adhesive restoration), however with undercut caries: upper 21 approximal, upper 24 mesial and distal, upper 26 occlusal and lower 46 occlusal and distal
For examinations: model teeth with screws, root part marked for identificationoptional assortment
exclusively delivered directly to the institutional examinating committees
For examinations: model teeth made of fluorescent material with screws, optional assortment. These patent protected, newly developped exam teeth can easily be distinguished from standard model teeth while staying fixed in the jaw model by means of an ultraviolet-lamp.
exclusively delivered directly to the institutional examinating committees
ultraviolet-testing lamp for easy identification of AG-3 ZEF exam teeth
model tooth series AG-3 ZE, however with undercut caries: upper 21 proximal, upper 24 mesial and distal, upper 26 occlusal and lower 46 occlusal and distal
��
��
AG-3 G
AG-3 ZP
AG-3 ZPB
AG-3 ZEE
special teeth and rubber moulds
rubber moulds for casting plaster study models, suitable for AG-3. Partially dentate models can be created by blocking-out segments.
dent
al m
odel
s
transparent centric plate with four guidance pins, fixing screw and M6 mounting thread, to be placed upon the rubber mould models cast from rubber moulds can thus be mounted in frasaco phantom heads or articulators
package containing:1 centric plate, 1 fixing screw, 5 mounting threads, the rubber moulds AG-3 G are however not included in the AG-3 ZP set.
re-fill pack containing 10 mounting threads
www.frasaco.com
model teeth fitting AG-3 model bases, with screws, simulating the situation after root canal treatment of incisors, premolars and molars, access holes are sealed with guttapercha. Suitable for training the making of direct and indirect posts with plastic or non-plastic (metal-lic) materials.
detailed information upon requestuppers 14, 21, 24, 26
Our range of model teeth series AG-3 ZE for endodontic exerci-ses please find on page 33.
��
AG-3 TWOK 100 AG-3 TWOK 101AG-3 TWOK 102AG-3 TWOK 103AG-3 TWOK 104AG-3 TWOK 105AG-3 TWOK 107
AG-3 TOK 100AG-3 TOK 101AG-3 TOK 102AG-3 TOK 103AG-3 TOK 104AG-3 TOK 105AG-3 TOK 107
partially dentate models
partially dentate upper model jaw, execution in hard thermosetting plastic material, elastic removable gingiva
The following models are available ex stock:
elastic removable gingiva for upper jaw, positioned over the model base, held in place by the model teethsuitable for AG-3 TOK
8 7 6 5 4 3 | 3 7 8 8 7 6 4 3 2 1 | 1 3 4 5 6 7 8 5 4 3 2 1 | 1 2 3 4 7 8 7 6 5 4 3 2 1 | 1 2 3 4 5 6 7 8 8 7 4 | 2 3 7 8 8 7 5 4 3 2 1 | 1 2 3 4 5 7 8 3 2 1 | 1 2 3
8 7 6 5 4 3 | 3 7 8 8 7 6 4 3 2 1 | 1 3 4 5 6 7 8 5 4 3 2 1 | 1 2 3 4 7 8 7 6 5 4 3 2 1 | 1 2 3 4 5 6 7 8 7 4 | 2 3 7 8 8 7 5 4 3 2 1 | 1 2 3 4 5 7 8 3 2 1 | 1 2 3
www.frasaco.comwww.frasaco.com
��
��
AG-3 TWUK 201AG-3 TWUK 207AG-3 TWUK 218AG-3 TWUK 219AG-3 TWUK 221AG-3 TWUK 228AG-3 TWUK 229AG-3 TWUK 231
AG-3 TUK 201AG-3 TUK 207AG-3 TUK 218AG-3 TUK 219AG-3 TUK 221AG-3 TUK 228AG-3 TUK 229AG-3 TUK 231
partially dentate models
dent
al m
odel
s
elastic removable gingiva for lower jaw, positioned over the model base, held in place by the model teeth suitable for AG-3 TUK
partially dentate lower model jaw, execution in hard thermosetting plastic material, elastic removable gingiva
The following models are available ex stock:
8 7 6 5 4 3 2 1 | 1 2 3 4 5 7 8 5 4 3 | 3 4 5 7 8 3 | 3 8 7 6 5 4 3 2 1 | 1 2 3 4 7 8 7 6 5 4 3 2 1 | 1 2 3 4 5 7 7 6 5 4 3 2 1 | 1 2 3 4 5 6 7 8 7 5 4 3 2 1 | 1 2 3 4 5 7 8 5 4 3 2 1 | 1 2 3 4 5
8 7 6 5 4 3 2 1 | 1 2 3 4 5 7 8 5 4 3 | 3 4 5 7 8 3 | 3 8 7 6 5 4 3 2 1 | 1 2 3 4 7 8 7 6 5 4 3 2 1 | 1 2 3 4 5 7 7 6 5 4 3 2 1 | 1 2 3 4 5 6 7 8 7 5 4 3 2 1 | 1 2 3 4 5 7 8 5 4 3 2 1 | 1 2 3 4 5
www.frasaco.com
��
��
A-3
A-3 DA
A-3 DAD 16
A-3 DAD 16 K
D-16
D-16 K
DA
standard working model A-3
dent
al m
odel
s
www.frasaco.com
standard working model A-3
Dental Models with permanent dentition: Models made of hard thermosetting plastic material. Upper and lower jaws are occluding in a stable intercuspidation. Incl. 32 screw-in teeth (A-3 Z) in hard thermosetting material and mounting thread for frasaco phantom heads.
Occlusal anatomy between prosthetic teeth and natural teeth.
Intercuspidation:
• Anterior relationship: minimum vertical overbite, slight canine guidance, dependant upon the inclination of the effective condylar paths. • Premolar to first molar region: tooth relationship = 1 : 2 • Second and third molar region: tooth relationship = 1 : 1
Gingivae:Hard gingiva modellation. Used mainly in pre-clinical, prosthetic propaedeutic courses and in dental techniques.
upper and lower model jaws in a stable intercuspidation (32 teeth)execution in hard thermosetting plastic material
upper and lower model jaws combined in a demonstration articulator allowing simple functional movements,execution in hard thermosetting plastic material
support with dental model A-3 DA
hinged support with dental model A-3 DA for different treatment positions
support only
hinged support only
demonstration articulator for fixation to all frasaco dental models(please specify the requested model)
��
A-3 Z
A-3 ZE
A-3 ZPI
A-3 ZPK
A-3 ZPS
SZ-1
SZ-2
standard teeth and preparations
www.frasaco.comwww.frasaco.com
set of 32 model teeth with screws, execution in hard thermosetting plastic material to fit A-3 models
individual model teeth with screwsoptional assortment
please request our order form for teeth
inlay preparationsavailable for the following teeth:
without undercuts, e.g. for inlays: 15, 16, 25, 37with undercuts, e.g. for amalgam: 27, 33, 35, 36, 46, 47
crown preparations of different preparation methods areavailable for the following teeth:
uppers 12, 13, 14, 15, 16uppers 21, 22, 23, 25, 26, 27lowers 32, 34, 35, 36lowers 43, 45, 46, 47lowers 44 (partial crown)
preparations for postsavailable for the following teeth:
upper 13, 16upper 23lower 42
Screwdriver with plastic screw grip. Note: Please do not remove the plastic screw grip from the tip of the screwdriver, as it avoids slipping off the screw head and makes faste- ning of the model teeth easier.
Screwdriver with torque limitation.Comfortable and even fastening of the model screws is guaranteed by the built-in torque limitation, no more overtightening of the screws. Please request manufacturers' adresses for products we have tested for this application.
��
��
A-3 G
A-3 ZP
A-3 ZPB
ES-2 220
ES-2 110
A-3 ZEG
special teeth and rubber moulds
dent
al m
odel
s
www.frasaco.com
rubber moulds for casting plaster study models, suitable for A-3. Partially dentate models can be created by blocking-out segments.
transparent centric plate with four guidance pins, fixing screw and M6 mounting thread to be placed upon the rubber mould models cast from rubber moulds can thus be mounted in frasaco phantom heads or articulators package containing: 1 centric plate, 1 fixing screw, 5 mounting threads, however the rubber moulds A-3 G are not included in the A-3 ZP set.
re-fill pack containing 10 mounting threads
electric screwdriver with torque limitation, turns right and leftScrew-driver with lever start, control device, balancer, support and slotted bitexecution 220 Volt
execution 110 Volt
For examinations:model teeth with screws, root part marked for identification optional assortment
exclusively delivered directly to the institutional examinating committees
��
A-3 TOK 101A-3 TOK 102A-3 TOK 103A-3 TOK 104A-3 TOK 105A-3 TOK 106A-3 TOK 107A-3 TOK 108A-3 TOK 109
A-3 TOK 110A-3 TOK 111A-3 TOK 112A-3 TOK 113A-3 TOK 114A-3 TOK 115A-3 TOK 116A-3 TOK 117A-3 TOK 118
A-3 TOK 119A-3 TOK 120A-3 TOK 121A-3 TOK 124A-3 TOK 126A-3 TOK 127A-3 TOK 129A-3 TOK 130A-3 TOK 131
A-3 TOK 133A-3 TOK 134A-3 TOK 135A-3 TOK 136A-3 TOK 137A-3 TOK 138A-3 TOK 139A-3 TOK 140
partially dentate models
partially dentate upper model jaw, execution in hard thermosetting plastic material (custom made models upon request)
The following models are available ex stock:
www.frasaco.comwww.frasaco.com
8 7 6 4 3 2 1 | 1 3 4 5 6 7 8 5 4 3 2 1 | 1 2 3 4 7 8 4 3 2 1 | 1 2 3 4 3 2 1 | 1 2 3 8 6 5 2 1 | 1 2 5 6 7 8 8 7 6 5 4 3 | 3 4 8 7 4 3 | 3 4 7 8 5 4 3 | 3 4 7 8 4 3 | 3 4 7
7 5 4 3 2 | 4 5 6 7 6 5 4 3 2 1 | 1 2 3 4 7 7 4 3 2 1 | 1 2 3 4 5 6 7 7 4 3 2 1 | 1 3 4 5 6 7 7 6 5 4 3 1 | 1 2 3 4 7 4 3 2 | 1 4 5 8 7 6 5 4 3 | 3 4 5 6 7 8 8 7 6 5 4 2 1 | 1 3 4 5 6 7 8 8 5 4 3 | 3 4 5 8
8 7 6 5 4 3 2 1 | 1 2 3 4 7 8 8 7 6 3 2 1 | 1 2 3 4 5 6 7 8 7 6 5 4 3 1 | 1 4 5 6 7 7 6 5 4 3 2 1 | 1 2 3 4 5 6 7 8 6 5 4 1 | 3 4 5 7 3 | 3 6 8 7 5 3 | 1 3 4 7 8 7 5 4 3 1 | 3 4 5 6 7 4 3 2 1 | 1 2 3 5
4 3 2 1 | 1 2 3 7 4 3 | 3 4 5 6 7 8 6 5 4 3 2 1 | 1 2 4 5 6 7 8 8 7 4 3 2 1 | 1 2 3 4 7 8 1 | 1 8 7 6 5 4 3 2 | 1 2 3 5 6 7 8 7 6 5 4 3 2 1 | 1 2 3 4 5 6 7 8 7 6 5 4 3 2 1 | 1 2 3 5 7
��
��
A-3 TUK 209A-3 TUK 210A-3 TUK 211A-3 TUK 212A-3 TUK 214
A-3 TUK 216A-3 TUK 218A-3 TUK 219A-3 TUK 221
A-3 TUK 227A-3 TUK 228A-3 TUK 229A-3 TUK 230A-3 TUK 231A-3 TUK 232A-3 TUK 233
A-3 TUK 201A-3 TUK 202A-3 TUK 203A-3 TUK 204A-3 TUK 205A-3 TUK 206A-3 TUK 207A-3 TUK 208
partially dentate models
dent
al m
odel
s
partially dentate lower model jaw, execution in hard thermosetting plastic material (custom made models upon request) The following models are available ex stock:
4 3 | 3 4 7 5 3 2 | 2 3 4 5 6 4 3 2 1 | 1 2 3 4 5 8 7 5 4 3 2 1 | 1 2 3 4 5 6 7 8 8 7 6 5 4 3 2 1 | 1 2 3 4 5 6 8
5 4 | 4 5 3 | 3 5 4 | 3 4 5 7 8 4 3 2 1 | 1 2 3 4 7 8
5 4 3 | 3 4 5 7 6 5 4 3 2 1 | 1 2 3 4 5 6 7 8 7 6 4 3 2 1 | 1 2 3 4 5 7 8 8 7 6 5 4 | 4 5 6 7 8 7 6 5 4 3 2 1 | 1 2 3 4 4 3 2 1 | 1 2 3 4 3 2 1 | 1 2 3 4 5 6 7 8
8 7 6 5 4 3 2 1 | 1 2 3 4 5 7 8 5 4 3 2 1 | 1 2 3 4 4 3 2 1 | 1 2 3 4 8 7 3 2 1 | 1 2 3 7 8 3 2 1 | 1 2 3 8 7 6 5 4 3 | 3 4 5 4 3 | 3 4 5 7 8 8 7 3 | 3 7 8
www.frasaco.com
��
AM-5
AM-5 Z
AM-5 ZE
AM-5 A
AM-5 E
AM-5 E A
deciduous model
www.frasaco.comwww.frasaco.com
deciduous denture model, articulating upper and lower model jaws,execution in elastic transparent plastic,20 friction-fit teeth in hard thermosetting material, anatomically formed roots
set of 20 friction-fit deciduous model teeth with anatomically formed roots to fit AM-5 models
individual friction-fit deciduous model teeth optional assortment please request our order form for teeth
model mounting plate with mounting thread, needed for fixation of deciduous models in frasaco phantom heads
extraction model for pediatric dentistryThis version of our deciduous denture model AM-5 is made from a tough, but elastic heavy-duty plastic material allowing mutiple exercises of pedo tooth extractions under constant and realistic conditions extraction model for pediatric dentistry including mounting plate for fixation in frasaco phantom heads
��
��
AK-6
AK-6 M
AK-6 WOK
AK-6 WOKM
AK-6 WUK
AK-6 WUKM
AK-6/2 S
AK-6/2 SMS
AK-6/2
AK-6/2 M
AK-6/2 WOK
AK-6/2 WOKM
AK-6/2 WUK
AK-6/2 WUKM
pedodontal models
dent
al m
odel
s
this pair of model mounting plates with mounting thread is always needed when using AK-6 and AK-6/2 dental models in phantom heads. Together with AG-3 S snap-on plates this quick-release plate warrants for rapid and repeat interchanging of pedodontal denture models maintaining their precise three dimensional relationship and unaltered occlusion.as above, however fitting magnetic model mounting plates AG-3 SMS for fixation in frasaco phantom heads
www.frasaco.com
mixed dentition model, to a large extent corresponding to AK-6/2. To facilitate first preparation exercises this version has a lower gingival contour, so that the teeth are easier accessible as with AK-6/2.
same as AK-6, however only with 20 deciduous teeth
elastic removable gingiva for upper jaw, positioned over the model base, held in place by the model teeth, suitable for model AK-6 OK
54321 I 12345 for AK-6 M OK
elastic removable gingiva for lower jaw, positioned over the model base, held in place by the model teeth, suitable for model AK-6 UK
54321 I 12345 for AK-6 M UK
mixed dentition model, upper and lower model jaws occlude in a stable intercuspidation, 20 deciduous teeth and 4 permanent molars. Execution in hard thermosetting plastic material, elastic removable gingivae, quick-release devices for model mounting plate
same as AK-6/2,however only with 20 deciduous teeth
elastic removable gingiva for upper jaw, positioned over the model base, held in place by the model teeth, suitable for model AK-6/2 OK
54321 I 12345 for AK-6/2 M OK
elastic removable gingiva for lower jaw, positioned over the model base, held in place by the model teeth, suitable for model AK-6/2 UK
54321 I 12345 for AK-6/2 M UK
��
AK-6/2 Z
AK-6/2 ZE
AK-6 Z
AK-6 ZE
AK-6/2 ZPU
AK-6/2 ZPUH
AK-6/2 ZPUW
AK-6/2 ZPUL
pedodontal models
www.frasaco.comwww.frasaco.com
set of 20 deciduous model teeth and 4 permanent molars in hard thermosetting material with screws to fit AK-6/2 models
individual deciduous model teeth and permanent molars in hard thermosetting material with screws, optional assortment please request our order form for teeth
set of 20 deciduous model teeth and 4 permanent molars in hard thermosetting material with screws to fit AK-6 models
individual deciduous model teeth and permanent molars in hard thermosetting material with screws, optional assortment please request our order form for teeth
deciduous model teeth with red pulp inserts, showing through if approached too closely during preparation, execution in hard thermo- setting material, appropriate for dental models AK-6/2 and AK-6uppers 53, 54, 55lower 85model tooth for pulpotomy exercises, anatomically correct designed hollow pulp chamber, screw-in type, appropriate for dental models AK-6/2 and AK-6 lower 85
deciduous model teeth as per AK-6/2 ZPUL description, however pulp chamber filled with red wax for pulpotomy exercises e.g. with a spoon-excavator, screw-in type, fitting dental models AK-6/2 and AK-6uppers 53,54,55lower 85
deciduous model teeth with hollow pulp chamber for pulpotomy exercises, screw-in-type, fitting dental models AK-6/2 and AK-6uppers 53,54,55lower 85
��
��
AK-6/2 IB HA
D-16
AK-6/2 I BE
AK-6/2 IS
AK-6/2 IB
AK-6/2 I WOKAK-6/2 I WUK
AK-6/2 I WS
training model for pediatric anaesthesia
www.frasaco.com
dent
al m
odel
s
set consisting of pediatric anaesthesia training model AK-6/2 IB and model holder HA support, which can be used together with set AK-6/2 IB HA as a complete injection training system
battery for pediatric anaesthesia training model
syringe for pediatric anesthesia training model
* Note: Always use a dry syringe only with this model, i.e. without anaesthetic, to avoid damaging the integrated contact points.
anaesthesia training model for pediatric dentistry *Upper and lower jaw like pedodontal model AK-6/2 with 20 deciduous teeth and 4 permanent molars, execution in hard thermosetting plastic material with elastic removable gingivae, integrated micro-electronic. 8 contact points in the upper jaw, 5 contact points in the lower jaw and 2 in its raising branches for training infiltration and intra-ligamentous techniques of anaesthesia. Audio-signal after correct injection, syringe included in the kit.
elastic removable gingiva for upper jawelastic removable gingiva for lower jaw
elastic removable gingiva for raising branches of lower jaw
��
��
A-PTS
A-PT
A-PTM
A-PTSM
A-PTSE
A-PTSEMS
A-P 9998-001
preparation training
dent
al m
odel
s
www.frasaco.com
preparation trainer kitmounting plate for frasaco phantom heads with clip device for a square transparent plastic block to exercise typical preparations complete with: 2 preparation trainers printed with 13 preparation designs in total, millimetric film for three – dimensional control and mounting key
preparation trainer2 square transparent plastic blocks printed with 13 preparation designs in total, millimetric film for three dimensional control
2 square plastic blocks simulating enamel, dentine and pulp layers made from 3 different layers of hard thermosetting frasaco tooth material, printed with 13 preparation designs in total
mounting plate for screw fixation of preparation and endodontic trainers in frasaco phantom heads
special mounting plate with metal insert for fixing preparation and endodontic trainers in frasaco phantom heads with magnetic moun-ting plates AG-3 SMS
preparation training cylinder (diameter of 15mm, 75mm long) made from hard thermosetting frasaco tooth material for first free handed preparation exercises
��
A-ETE-0A-ETE-10A-ETE-20A-ETE-30
A-ETK-0A-ETK-10A-ETK-20A-ETK-30
A-ETEL-0A-ETEL-10A-ETEL-20A-ETEL-30
A-ETS
A-ETA
A-ETSE
AG-3 ZPUK-21AG-3 ZPUK-24AG-3 ZPUK-26AG-3 ZPUK-46
endodontic exercises
endo trainertransparent cylinder to practice root canal preparation, round plastic material to magnify the root canal, canal with red pulpal walls,root canals with curves of 0°, 10°, 20° or 30°
endo trainer transparent cylinder to practice root canal preparation, round plastic-material to magnify the root canal, canal with non-coloured pulpal walls, root canals with curves of 0°, 10°, 20° or 30°
endo trainer with open apextransparent cylinder to practice root canal preparation, round plastic material to magnify the root canal, canal with red pulpal walls, root canals with curves of 0°, 10°, 20° or 30°
endo trainer kit mounting plate for frasaco phantom heads with slide device for endo cylinders to practice root canal preparation complete with:2 endo trainers with root canal with red pulpal walls2 endo trainers with root canal with non-coloured pulpal wallsroot canals with curves of 0° and 20°1 cover hood for blind exercises
cover hood for blind exercises
preparation and endo trainer mounting plate for frasaco phantom heads
www.frasaco.comwww.frasaco.com
In this new version of the well-known frasaco endo trainers the apex has been opened, so over-instrumentation can be detected.
model teeth with root canals, fitting AG-3 models, with screws,execution in transparent plastic material with red pulpal walls and ivory crowns in hard thermosetting material for pre-clinical trainingin root canal treatment and cavity preparation uppers 21, 24, 26lower 46
��
��
ANA-4 ZPUK-21ANA-4 ZPUK-24ANA-4 ZPUK-26ANA-4 ZPUK-46
ANKA-4 ZPUK-21ANKA-4 ZPUK-24ANKA-4 ZPUK-26ANKA-4 ZPUK-46
AG-3 ZPUR-21AG-3 ZPUR-24AG-3 ZPUR-26AG-3 ZPUR-46
ANA-4 ZPUR-21 ANA-4 ZPUR-24ANA-4 ZPUR-26ANA-4 ZPUR-46
ANKA-4 ZPUR-21ANKA-4 ZPUR-24ANKA-4 ZPUR-26ANKA-4 ZPUR-46
AG-3 ZEE-14AG-3 ZEE-21AG-3 ZEE-24AG-3 ZEE-26
ANA-4 ZEE-14ANA-4 ZEE-21ANA-4 ZEE-24ANA-4 ZEE-26
ANKA-4 ZEE-14ANKA-4 ZEE-21ANKA-4 ZEE-24ANKA-4 ZEE-26
endodontic exercises
dent
al m
odel
s
model teeth with root canals similar to AG-3 ZPUK, with screws, how-ever fitting AN-4 model bases.
model teeth with root canals as above, however fitting the new frasaco click system models ANK-4.
www.frasaco.com
model teeth with root canals fitting AG-3 models, with screws, execution in hard thermosetting material, ivory crowns and roots with red pulpal walls for pre-clinical training in root canal treatmentand cavity preparation under x-ray control
uppers 21, 24, 26lower 46
model teeth with root canals similar to AG-3 ZPUR, with screws, however fitting AN-4 model bases.
model teeth with root canals as above, however fitting the new frasaco click system models ANK-4.
model teeth fitting AG-3 models, with screws, simulating the situationafter root canal treatment of incisors, premolars and molars, access holes are sealed with gutta-percha. Suitable for training the making of direct and indirect posts with plastic or non-plastic (metallic) materials.
detailed information upon requestuppers 14, 21, 24, 266
Model teeth with guttapercha filling similar to AG-3 ZEE, with screws, however fitting AN-4 model bases.
model teeth with root canals as above, however fitting the new frasaco click system models ANK-4.
��
A-J A
A-J KWUK
A-J K
A-J KWA
A-J KA
A-J KW
A-R
A-RD
implantology training
www.frasaco.comwww.frasaco.com
model mounting plate for frasaco phantom head
elastic, exchangeable gingiva for implant training mandible, suitable for surgical exercises
implant training model anatomical designed edentulous mandible in plastic material similar to human bone, simulated nerves, left and right at different locations, right quadrant with narrow tapering crest, fresh alveoli 31 and 32, semi-healed alveole 37, alveole 33 with bone pocket and fenestration, suitable for GTR-exercises
implant training model set consisting of:implant training mandible A-J Kelastic, exchangeable gingiva A-J KWUKmodel mounting plate A-J A
implant training model set consisting of:implant training mandible A-J Kmodel mounting plate A-J A
implant training model set consisting of:implant training mandible A-J Kelastic, exchangeable gingiva A-J KWUK
model tray execution in transparent plastic, suitable for upper and lower jaws, mounting thread for phantom head, to be cladded out with animal or artificial bone material to place implants, with slots to place x-rays films for examination of placed implants
model tray as above, but with 6-7 mm wide slots for digital CCD-sensors
��
��
A-JT
A-JT D2
A-JT D3
A-JT D4
B-3 LMU
B-3 NMB
B-3 UK LMU
B-3 UK LMUE
B-3 NHJ
dent
al m
odel
s
implantology training
set consisting of 3 implant trainer plates, each 100 by 50 mm wide and 17 mm thick, made from special material similar to human bone (corresponding to bone hardness classifications D2, D3 and D4) for first drilling exercisessingle implant trainer plate as above corresponding to class D2
single implant trainer plate as above corresponding to class D3
single implant trainer plate as above corresponding to class D4
edentulous upper and lower model jaws, execution in hard ther- mosetting plastic material, normal bite without undercuts. Upper jaw corresponding to B-3 NM OK K (see page 44), however lower jaw with an exchangeable insert made from special material simulating human bone. Thanks to this combination the model can not only be used for full denture exercises in prosthodontics, but also for first implant training in material similar to human bone with correct anatomy. As the insert made from simulated bone material can be changed individually, an economical model combination for multiple usage
bite registration block for model combination B-3 LMU, available only with complete model B-3 LMU
edentulous lower jaw, execution in hard thermosetting plastic materi-al, normal bite without undercuts with an exchangeable insert made from special material simulating human bone
insert made from special material simulating human bone fitting B-3 UK LMU model for repeated implantology training
edentulous lower jaw without undercuts completely made from special material simulating human bone for implant training
www.frasaco.com
��
A-J F SOK
A-J F SOKW
A-J A
A-J F UKA
A-J F UK
A-J F UKW
A-J F UKWA
A-J F WOK
A-J F WUK
training in implantological surgery
www.frasaco.comwww.frasaco.com
The new frasaco A-J F range of upper and lower jaw models can be used for training purposes for all dental implantological surgery procedures under correct anatomical conditions. The models can be displayed on panoramic X-ray and represent the anatomy of an implant patient with a greatly reduced residual dentition. Upper jaw: paranasal sinus abnormally expanded due to bone atrophy, residual dentition: 13, 23, 27 Lower jaw: 2 canals for simulating the alveolar nerve, residual dentition: 33, 37, 43 The artificial bone material corresponds to the physicomechanical properties of the human jaw bone. There is also the option of an elastic removable gingiva cover. These features not only allow drilling under realistic conditions of resistance and drilling pressure but also ensure that incisions, periostomy and suturing techniques can be practised under as realistic conditions as possible. Simulation of the mucosa of the maxillary sinus and paranasal sinus in the upper jaw even provides the opportunity of training in direct or indirect sinus lift surgery. Fitting the models into frasaco phantom heads (upper jaw with an integrated mounting thread, lower jaw with reusable metal mounting plate) provides even more realistic practice in the restricted working area of the oral cavity.
upper jaw for implantology training with sinus membrane
upper jaw for implantology training with sinus membrane and soft removable gingiva
*demo-model shown not available
model mounting plate for frasaco phantom heads
lower jaw for implantology training including model mounting plate
lower jaw for implantology training
lower jaw for implantology training with soft removable gingiva
lower jaw for implantology training with soft removable gingiva and model mounting plate for frasaco phantom heads
*demo-model shown not available
elastic, exchangeable gingiva for upper jaw model
elastic, exchangeable gingiva for lower jaw model
��
��
A-J F WOK
A-J F OKW 99-001
A-J F OK K
A-J F UK K
elastic, exchangeable gingiva for upper jaw model
re-usable upper implant model jaw similar to A-J F SOKW, however without sinus membrane and without abnormally expanded paranasal sinus due to bone atrophy, therefore only suitable for implant training but not for training sinus lift surgery.
artificial bone material for reconstruction of upper implant model jaw A-J F OKW 99-001
artificial bone material for reconstruction of lower implant model jaw A-J F UK
training in implantological surgery
dent
al m
odel
s
www.frasaco.com
��
��
A-J OP ZE
A-J OP ZET
A-J OP WOK
A-J OP WUK
A-J OP OK K
A-J OP UK K
A-J OP OK
A-J A
A-J OP UK
oral surgery training
dent
al m
odel
s
www.frasaco.com
individual teeth for replacement for models A-J OP:uppers 11, 12, 14, 16 teeth with root for resectionupper 13 tooth with root for embeddingupper 21 tooth with root for resectionuppers 22, 24, 26 teeth with root for resectionupper 23 tooth with root for embeddinglower 31, 32, 33, 37, 38 teeth with root for resectionlower 48 tooth with root for embedding
upper 21 transparent tooth with root with complete root canal for endo-surgical training
soft removable gingiva for upper jaw,suitable for A-J OP OK
soft removable gingiva for lower jaw,suitable for A-J OP UK
artificial bone material for embedding teeth into upper jaw A-J-OP OK
artificial bone material for embedding teeth into mandible A-J OP UK
Surgical training model, upper jaw (can be reconstructed and reused again) with vestibular and palatal impacted canines and partial dentition, some teeth with apex areas affected by granuloma. 11, 12, 14, 16 and 21, 22, 24 and 26 with granuloma prepared for apicectomy. 21 with transparent root for root filling control, the elastic removable gingiva allows for realistic surgical exercise and suturing.
*demo-model shown not available
model mounting plate for phantom head
Surgical training model (can be reconstructed and reused again) anatomical designed mandible in special plastic material similar to human bone, simulated nerves left and right at different locations, exchangeable teeth no. 31, 32, 33, 34 with granuloma prepared for apicectomy. The completely impacted and partially rotated wisdom teeth are prepared for surgical extraction (Alveole 22 with bone pocket and fenestration, suitable for GTR-application). The elastic removable gingiva allows for realistic surgical exercises and suturing*demo-model shown not available
��
www.frasaco.de
A-OP OK
A-OP UK
A-OP EOK
A-OP EUK
A-OP ZE
A-OP K
oral surgery training
www.frasaco.com www.frasaco.com
surgical model, upper model jaw with displaced canine 23, soft removable gingiva, resection openings around the central incisor 11 and premolar 24, all teeth with exception of 23 are screwed-in and can be replaced (please specify the used phantom head)
surgical model, lower model jaw with displaced wisdom tooth 38, soft removable gingiva, resection opening around the canine 33, all teeth with exception of 38 are screwed-in and can be replaced (please specify the used phantom head)
soft removable gingiva for upper jaw to be adhered to A-OP OK models
soft removable gingiva for lower jaw to be adhered to A-OP UK models
individual model teeth with screws optional assortment (A-3Z anatomy) upper 11 tooth with root for resection, uppers 12, 17, 21, 22upper 23 tooth with root for embeddingupper 24 tooth with root for resectionlowers 31, 32, 36, 37lower 33 tooth with root for resectionlower 38 tooth with root for embeddinglower 41, 42, 43, 44, 47, 48artificial bone material for embedding canine and wisdom tooth consisting of 4 bottles plus 1 strip of wax
�0
��
www.frasaco.de
A-JFK D
A-JFK C
A-JFK E
A-JFK A
A-JFK B
fractured jaw models
dent
al m
odel
s
www.frasaco.com
mandible - fracture fossa rightSet including elastic removable gingivaA-J OPWUK and model mounting plate A-J A
mandible - fracture horizontal branches rightSet including elastic removable gingivaA-J OPWUK and model mounting plate A-J A
mandible - fracture combination- fossa left- paramedial right- basal triangleSet including elastic removable gingivaA-J OPWUK and model mounting plate A-J A
mandible - medial jaw fracture Set including elastic removable gingivaA-J OPWUK and model mounting plate A-J A
mandible - paramedial jaw fracture leftSet including elastic removable gingivaA-J OPWUK and model mounting plate A-J A
��
B-3 NH
B-3 NHB
B-3 NM
B-3 NMB
B-3 KN
B-3 KNB
B-3 D
B-3 DB
B-3 NMG
B-3 ZP
B-3 ZPB
edentulous models
www.frasaco.com www.frasaco.com
edentulous upper and lower model jaws, execution in hard thermosetting plastic material, normal bite without undercuts
bite registration block for B-3 NH, available only with complete B-3 NH models
edentulous upper and lower model jaws, execution in hard thermosetting plastic material,normal bite with undercuts.bite registration block for B-3 NM, available only with complete B-3 NM models
newly designed edentulous upper and lower model jaws,execution in hard thermosetting plastic material, cross bite
bite registration block for B-3 KN available only with complete B-3 KN models
edentulous upper and lower model jaws, execution in hard thermosetting plastic material, close bite
bite registration block for B-3 D, available only with complete B-3 D models
rubber moulds per pair for casting plaster duplicates of edentulous model B-3 NM, normal bite
transparent centric plate with four guidance pins, fixing screw and mounting thread M6 to be placed upon the rubber mould models cast from rubber moulds can thus be mounted in frasaco phantom heads or articulators package containing 1 centric plate, 1 fixing screw, 5 mounting threads
re-fill pack containing 10 mounting threads
��
��
AG-3 Z 28
AG-3 ZE
B-3 NT
B-3 NTB
AG-3 G 28
AG-3 ZP
AG-3 ZPB
models for dental technicians
dent
al m
odel
s
www.frasaco.com
set of 28 model teeth for preparationsexecution in hard thermosetting plastic material
individual model teeth for preparations
please request our order form for teeth
edentulous upper and lower model jaws, execution in hard thermoset-ting plastic material, upper and lower model jaws matching perfectly each other, ideal distance between models to set up the teeth
bite registration block for B-3 NT available only with complete B-3 NT models
rubber moulds for dental technicians examinations, for casting completely dentate master models upper and lower model jaw moulds for 28 gnathologically contoured teeth in a stable intercuspidation with canine guidance and functional contact points Premolar to first molar region: tooth relationship = 1 : 2 Second and third molar region: tooth relationship = 1 : 1 distally
transparent centric plate with four guidance pins, fixing screw and mounting thread M6 to be placed upon the rubber mould models cast from rubber moulds can thus be mounted in frasaco phantom heads or articulatorspackage containing: 1 centric plate, 1 fixing screw, 5 mounting threads,the rubber moulds AG-3 G 28 are however not included in the AG-3 ZP set.
re-fill pack containing 10 mounting threads
��
B-3 NH OK K
B-3 NH 218 B
A-3 TUK 218
A-3 TOK 102
A-3 TB 99-001
A-3 TUK 232
special bite registration blocks for partially dentate and edentulous model jaws
www.frasaco.com
edentulous upper jaw, execution in hard thermosetting plastic material, normal bite without undercuts
bite registration block for the combination of edentulous upper jaw B-3 NH OK K and partially dentate lower jaw model A-3 TUK 218
partially dentate lower model jaw with remaining teeth in positions 33 and 43
partially dentate upper model jaw, execution in hard thermosetting plastic material with remaining teeth in positions 11, 12, 13, 14, 15 and 21, 22, 23, 24, 27, 28bite registration block for the combination of partially dentate upper model jaw A-3 TOK 102 and partially dentate lower model jaw A-3 TUK 232
partially dentate lower model jaw, execution in hard thermosetting plastic material with remaining teeth in positions 31, 32, 33 and 41, 42, 43, 44
��
��
AG-3 H
AG-3 WOKH
AG-3 WOKHKAG-3 WOKH KR
AG-3 WUKH
AG-3 WUKHKAG-3 WUKH KR
A-CK
AG-3 ZE
AG-3 H KR
dental hygiene training
dent
al m
odel
s
oral hygiene modelarticulating upper and lower model jaws are occluding in a stable intercuspidation, (32 teeth with gnathological fissures, series AG-3 Z), hard thermosetting material, elastic removable gingivae, simulation of periodontosis with pockets, suitable for subgingival removal of calculus
elastic removable gingiva for oral hygiene model upper jaw,held in place by the model teeth
as above, but in transparent executionas above, however in red-transparent execution
elastic removable gingiva for oral hygiene model lower jaw,held in place by the model teeth
as above, but in transparent executionas above, however in red-transparent execution
synthetic calculus for application on roots and crowns of model teeth, due to superior adhesion no more roughening of the tooth surface needed before application of the synthetic calculuspacking content is sufficient for approx. 2.300 model teeth
www.frasaco.com
individual gnathologically contoured AG-3 standard model teeth with screws, optional assortment (previously used special teeth with roughened surface are no more required due to the improved adhesion of the new synthetic calculus A-CK)
please request our order form for teeth
oral hygiene model similar to AG-3 H, however with gingivae in red-transparent execution
��
A-PZ
A-CK
A-P K G
A-PZ Z
A-PZ ZC
A-PZ ZE
A-PZ ZEC
A-PZ WOK
A-PZ WOKK
A-PZ WOK KR
A-PZ WUK
A-PZ WUKK
A-PZ WUK KR
periodontology model A-PZ
www.frasaco.com www.frasaco.com
periodontal model
upper and lower model jaws, execution in hard thermosetting plastic material, elastic removable gingivae, simulation of periodontosis in its early to advanced stages
detailed information upon request
synthetic calculus for application on roots and crowns of model teeth, due to superior adhesion no more roughening of the tooth surface nee-ded before application of the synthetic calculus, packing content is suf-ficient for approx. 2.300 model teeth
adhesive for gingivae
standard model teeth, as well as special teeth with 1 and 2 rootsset of 27 model teeth, execution in hard thermosetting plastic material, with screws, suitable for model A-PZ without calculus
with calculus
standard model teethuppers 11, 12, 13, 14, 15, 17uppers 21, 22, 23, 24, 25lowers 32, 37lowers 42, 43without calculus
with calculusoptional assortment
elastic removable gingiva for upper jaw, held in place by the model teeth, suitable for A-PZ OK
as above, but in transparent execution
as above, however in red-transparent execution
elastic removable gingiva for lower jawsuitable for A-PZ UK
as above, but in transparent execution
as above, however in red-transparent execution
��
��
A-PZ ZE 1
A-PZ ZEC 1
A-PZ ZE 2
A-PZ ZEC 2
periodontology model A-PZ
dent
al m
odel
s
www.frasaco.com
special model teeth with 1 rootuppers 26, 27uppers 31, 33, 34lowers 41, 44, 45without calculus
with calculus optional assortment
special model teeth with 2 rootsupper 16lower 36lowers 46, 47without calculus
with calculus optional assortment
��
A-PB
A-PB WOK
A-PB WOKK
A-PB WOK KR
A-PB WUK
A-PB WUKK
A-PB WUK KR
A-CK
A-P K G
A-PB Z
A-PB ZC
A-PB ZE
A-PB ZEC
periodontology model A-PB
periodontal model upper and lower model jaws, execution in hard thermosetting plastic material, elastic removable gingivae, simulation of well-advanced periodontosis of gingivae and maxillae bones detailed information upon request
elastic removable gingiva for upper jawsuitable for A-PB OK
as above, but in transparent execution
as above, however in red-transparent execution
elastic removable gingiva for lower jawsuitable for A-PB UK
as above, but in transparent execution
as above, however in red-transparent execution
synthetic calculus for application on roots, crowns of model teeth, due to superior adhesion no more roughening of the tooth surface needed before application of the synthetic calculus, packing content is sufficient for approx. 2.300 model teeth
adhesive for gingivae
standard model teeth as well as special teeth with 1, 2 and 3 roots set of 26 model teeth, in hard thermosetting plastic material with screws, suitable for model A-PB without calculus
with calculus
standard model teethuppers 11, 13, 14, 15uppers 21, 22, 25lower 32lowers 42, 43without calculus
with calculusoptional assortment
www.frasaco.com www.frasaco.com
��
��
A-PB ZE 3
A-PB ZEC 3
A-PB ZE 1
A-PB ZEC 1
A-PB ZE 2
A-PB ZEC 2
periodontology model A-PB
dent
al m
odel
s
www.frasaco.com
special model teeth with 3 rootsuppers 16, 17uppers 26, 27without calculus
with calculus optional assortment
special model teeth with 1 rootupper 23lowers 31, 33, 34, 35lowers 41, 44, 45, 47without calculus
with calculusoptional assortment
special model teeth with 2 rootsupper 24lowers 36, 37without calculus
with calculusoptional assortment
��
A-S
A-S G
A-8
A-3 ZEB
AG-3 ZEB
A-3 K
A-R
A-RD
orthodontic exercises
www.frasaco.com www.frasaco.com
upper and lower metallic model jaw bases for casting individual study models with extracted teeth or frasaco teeth
rubber moulds to set up teeth in A-S model jaw bases
orthodontic denture model with 8 anterior teeth, as well as 24 (series A-3 ZEB) teeth supplied loose for embedding in dental wax, all teeth in hard thermosetting material, suitable to bond brackets, lateral incisors and canines fixed to support orthodontic bands
(after fixation of brackets and orthodontic bands – inside the phantom head – the model should be removed and warmed up to melt the wax, teeth will move into the desired therapeutic position)
(see exemplary right fig.)
wax-mount model teeth for bracket exercises the roughened surface allows brackets to be cemented using commercial isocyanate contact-glue(brackets not included)
series A-3 ZEB for model A-8
series AG-3 ZEB for model A-S
the apical retention beads prevent teeth extrusion from the wax base
model trayexecution in transparent plastic for embedding of extracted teeth in dental wax (after fixation of brackets and orthodontic bands-inside the phantom head – the model should be removed and warmed up to melt the wax, teeth will move back to the correct position) mounting thread for frasaco phantom heads, suitable for upper and lower jaws
digital model tray as above, however with 6-7 mm wide slots for digital CCD-sensors
�0
��
AG-3 I WOK
AG-3 I WUK
AG-3 I WS
AG-3 IB
AG-3 I BE
A-R
A-RD
A-RS
A-RE
A-RE POKA-RE PUK
A-RE WOKA-RE WUK
x-ray diagnosis and local anaesthesia
dent
al m
odel
s
elastic removable gingiva for maxilla of injection model
elastic removable gingiva for mandible of injection model
elastic removable gingiva for raising branches of lower jaw of injection model
Note:Our new training model for paediatric anaesthesia please find on page 29.
dental model for local anaesthesia, articulating upper and lower jaws(32 teeth in hard thermosetting material with gnathological fissures)integrated micro-electronic circuit, 3 contact points in the maxilla2 contact points in the mandible2 contact points in the lower jawsaudio-signal after correct injectionelastic removable gingivaeinjection model with batteryNote: Always use a dry syringe only with this model, i.e. without anaesthetic, to avoid damaging the integrated contact points.
battery for injection model AG-3 I B
www.frasaco.com
x-ray model tray like A-RS with bore holes to fasten screw-in plates and fitting elastic removable gingivae. This way model teeth series AN-4 ZE and / or extracted natural teeth can be set following the den-tal arch.
screw-in plate for upper jawscrew-in plate for lower jaw
elastic removable gingiva for upper jawelastic removable gingiva for lower jaw
x-ray model trayexecution in transparent radiolucent plastic with slots for x-ray films, mounting thread for frasaco phantom heads, suitable for upper and lower jaws to hold extracted teeth ( e.g. for diagnosis of approximal caries).
digital model tray as above, however with 6-7 mm wide slots for digital CCD-sensors
new x-ray model tray, execution in transparent radiolucent plastic similar to the frasaco models A-R and A-RD, however with wider jaw arc, can be used with either x-ray films or CCD-sensors of various sizes. With its new back plate the model can be used both in phantom heads with magnetic mounting plates and positioning pins or with standard mounting threads
��
A-E M
A-E ZM
A-E ZME
A-E K
A-E ZK
A-E ZKE
exodontic exercises
www.frasaco.com www.frasaco.com
extraction model for basic exercisesexecution in cast aluminium, 32 metal teeth in CrNi-Steel,embedded in resistent plastic resin, with back plate
set of 32 metallic model teeth in CrNi-Steel to fit extraction model A-E
individual metallic model teeth in CrNi-Steeloptional assortment
please request our order form for teeth
extraction model for advanced exercisesexecution in cast aluminium, 32 plastic teeth, embedded in resistent plastic resin, with back plate plastic teeth roots will fracture in case of incorrect luxation
set of 32 plastic model teeth in hard thermosetting material, to fit extraction model A-Eindividual plastic model teethin hard thermosetting material, optional assortment please request our order form for teeth
��
��
A-E AOK
A-E AUK
A-E ROK
A-E RUK
A-E G
A-E F
A-E Q
exodontic exercises
dent
al m
odel
s
www.frasaco.com
upper jaw aluminium base for extraction model for mounting the upper teeth, with mounting thread for frasaco phantom heads
lower jaw aluminium base for extraction model for mounting the upper teeth, with mounting thread for frasaco phantom heads
back plate for upper jaw for positioning of root apices
back plate for lower jaw for positioning of root apices
rubber mouldfor upper and lower model jawssuitable for reconstruction of model A-E
detailed information upon request
plastic model material and catalyst for reconstruction of extraction model jaws, requirement approx. 50 g plastic model material and 17,5 g catalyst for repeat application, contents of package:500 g plastic model material175 g catalystsufficient for approx. 10 applicationsseparating spray for repeat application sufficient for approx. 50 applications
��
D-1
D-2
D-15
D-4
D-5
demonstration models
mandible in natural size with pathological changes, hinged jawbone segment opens to show the nerve system, the roots, a suppurative pulp infection, a displaced wisdom tooth, caries, calculus and a sagittal section through crown and roots of tooth 44
individual model tooth, scale 5:1, please specify tooth position required when ordering, 28 teeth available
molar socket model scale 5 : 1 lateral exposure representing caries, calculus, abscess, abrasion and suppuration
caries demonstration modelscale 5 : 1with 3 removable and sectionable teethrepresenting 3 stages of caries and pulp affection
sectioned molar demonstration modelscale 2.5 : 1representing the nerve system, the roots, a crown with inlay, an amalgam filling, an abscess and a displaced wisdom tooth with signs of dissociation by inflammation
www.frasaco.com
��
��
A-3 DAD 16
AG-3 DAD 16
D-16
D-6 KF
AG-3 D-6 S
AK-6/2 DA
ANA-4 DAVD 16
AK-6/2 DAD 16
demonstration models
dent
al m
odel
s
support with dental model A-3 DA (right)
support with dental model AG-3 DA (left)
support only(please specify the requested model)
demonstration model to teach waxing-up techniques on occlusalsurfaces as well as morphology and function of anatomical teeth, distinguishing by its three point intercuspidation, ideal for optimumwaxing-up of the occlusalsupper and lower model jaws scale 5 : 1, tooth and gingiva coloured plastic with individual contact points
AG-3 upper and lower model jaws, execution in hard thermosetting plastic material, with coloured segments indicating how to wax-up occlusal surfacespremolar to first molar region: tooth relationship = 1 : 2 second and third molar region: tooth relationship = 1 : 1 distally
www.frasaco.com
In combination with a frasaco DA demonstration articulator, the deciduous denture model AK-6/2 is a useful tool for explaining topics of pediatric dentistry like temporomandibular articulation, grinding of teeth etc. to the patient
support with dental model ANA-4 DAV (right)
support with deciduous dental model AK-6/2 DA(left)
��
��
phan
tom
hea
ds
www.frasaco.de
phantom headsfrasaco phantom heads permit the simulation of life-like situations from all fields of dental surgery and dental technology without distracting attention from the essentials.
Our pride in innovation and decades of experience have been directed towards simplifying use, reducing the number of indivi-dual components and minimizing maintenance. The result is as simple as it is precise and economical. All units have been de-signed along modular construction lines. Every workstation can be assembled according to the topic being taught, and extended, if necessary. Our units are always as simple or, as complex, as necessary.
��
characteristics of our phantom heads
www.frasaco.com www.frasaco.com
The frasaco-phantom head is the ideal working tool for under- and postgraduate courses for demonstrations and practical exercises. The state-of--the-art teaching system to simulate clinical cases in a realistic environment. For universities and institutions, but also for the dental office. A space saving dental simulator to train dental procedures to perfection. At any time.
All used materials such as aluminium, refined steel, thermo-plastics and elastomers are of high-grade quality. The aluminium components have a coating which provides extra protection against corrosion and facilitates cleaning, in order to prevent any ugly scratches becoming visible, thus allowing the compon-ents to retain their aesthetic appearance longer.
Many years of experience in manufacturing phantom heads, have long proven its high quality. The robust construction has been proven in daily practice, designed for use by students: practical to use and featuring uncomplicated handling as well as concentrating on the essential functions.
The patented frasaco articulation (P-6 and PH-2 series) com-bines average values of protrusive, mediotrusive and laterotrusive paths in one. Optimum functioning using few parts, warrants for reduced maintenance and repairs as all screws are locked into place and cannot be lost. Clearly contoured components allow for easy cleaning. Inaccessible areas which could trap dirt have virtually been excluded.
The modular construction of the frasaco model range fit perfectly the frasaco phantom heads. Spare parts availability is assured for up to 10 years.
��
��
P-6/5
P-6/3
frasaco phantom heads P-6/3, P-6/5
phan
tom
hea
ds
www.frasaco.com
Example for ordering a complete frasaco phantom head
Phantom head 1 frasaco phantom head P-6/3 Mask 1 frasaco face mask P-6 GM Water drainage 1 frasaco water drainage nozzle P-6 W Hose 1 water drainage hose (1.20 m) P-6 SL Bottle 1 water collector bottle P-6 F Model 1 upper and lower model jaws frasaco AG-3 Mounting 1 frasaco table mounting assembly P-TDGP
The P-6/5 phantom head is the most sophisticated training aid, de-scription corresponding to P-6/3 including the following additional features: the inclination of condylar guidance is adjustable on both sides thus allowing the ideal anterior and canine guidance or a fully balanced occlusion to be simulated. The basic geometric dimensions can be measured with compasses and the models transferred to partial and fully adjustable articulators. Provided with corresponding fixing pins at the hinge-axis points for mounting of anatomical face bows and hinge-axis localizers. (dental model not included)
frasaco phantom head P-6 with exchangeable articulator P-3This new edition following the legendary frasaco P-5/3 features many detail product improvements. The articulator P-3 has anatomically shaped condyle boxes to allow for simulation of corresponding human masticatory functions within three-dimensional curved condylar paths. The model jaws and articulations are positioned in the correct anatomical relationship and the natural excursions of the mandible can be reproduced exactly. The vertical adjustment allows for moun- ting of different model jaws. The robust skull dome is coloured throughout in grey with a plastic coat of approx. 3 mm thickness, to prevent paint to splinter off and to allow scratches to be polished out. The neck articulation is located in the anatomically correct position at the cranial base and is used to position the head. The robust lift inside the skull dome provides access to a starwheel bolt which releases the face mask holding plate. In order to allow anatomical face bows to be mounted, a nose has been added to the skull dome and the articulator P-3 is provided with corresponding fixing pins. Should the mandible be opened to 15 mm distance between upper and lower incisal edges, a deflection roller makes the heads of the condyles slide forward as with a patient. All components are made of high-grade materials and all fixing bolts are protected against loss. A face mask can be gripped between the liftplate and the articulator plate
(dental model not included)
��
P-6 GS
P-6 GM
P-6 GL
P-6 W
P-6 Z
P-6 SL
P-6 K
P-6 H
P-6 F
accessories for P-6/3 and P-6/5
www.frasaco.com www.frasaco.com
face masks series P-6 G made of thermoplastic elastomer material fitting frasaco phantom head series P-6 and the predecessing series P-5. Choice of 3 different sizes of mouth openings.
face mask with mouth opening size S small size mouth opening matching oral cavity mask P-6 GP, also recommended as pediatric face mask
face mask with mouth opening M medium size mouth opening, corresponding to the previous frasaco P-5 G face mask
face maks with mouth opening L large size mouth opening, also recommended for the newest generation of Adec/DentSim-simulators
water drainage nozzle for face masks P-6 GS, P-6 GM, P-6 GL. The positions for connecting the water drainage nozzle are marked on the inside of the face mask and can easily be perforated
removable elastic tongue
water drainage hose (1.20 m)
snap-on coupling for water hose (incl. water drainage hose 0,12 m)
support for water collector bottle
water collector bottle
�0
��
P-6 IS
AG-3 S
AG-3 SMS OKAG-3 SMS UK
P-6 O
P-6 A
P-6 GM IW
P-6 IWS
accessories for P-6/3 and P-6/5
phan
tom
hea
ds
www.frasaco.com
incisal pin for fixation on phantom head P-5 incl. nasal hole and fixing bolt recommended for full denture exercises to establish the vertical relationship (height of the bite)
snap-on model mounting plate (pair) with 3 positioning lugs and mounting thread for frasaco phantom head series P-6 and PH-2 for rapid interchanging of model jaws in reproducible position
magnetic model mounting plates for frasaco phantom heads for rapid and repeated interchanging of model jaws. The model jaws have to be equipped with a back plate with metal disk (see AG-3 ROKM, AG-3 RUKM).
ears for phantom headfor all phantom heads series P-6 and P-5, also for completion. Anatomically correct designed ears made of hard plastic can be fixed to the face mask with connectors included in the set. Anatomically correct and fixed position at the condyle boxes of the phantom head. Excersises with face bows can be done under realistic conditions. Supplied per pair
Eyes for phantom heads ( stickers )Supplied per pair
face mask P-6 GM with integrated water drainage system inside the oral cavity, to be connected to a suction unit at the dental simulator
water drainage hose set as repeat order part for face mask P-6 GM IW as above or for upgrading face mask P-6 GM to a P-6 GM IW
��
PH-1
UAV
PH-2
P-HA
low cost phantom heads PH-1 and PH-2
www.frasaco.com www.frasaco.com
The frasaco PH-1 is ideal for users that are looking for an inexpensive yet handy product. Skull dome and face mask of the phantom are reduced to the front part only and are detachable for easy changing of face mask and dental models. Its new frasaco universal articulator UAV made from hard thermosetting plastic material with patented adjustable mandible allows the usage of all dental models with mounting thread M6 in stable occlusion (except AG-3 IB). Included is a short rod with a snap-in stopper to assure a stable fixation of the model during „treat-ment“. When used with the optional oral cavity mask P-6 GP, even working with water is possible. Using a frasaco mounting system, PH-1 can easily be brought into all necessary working positions. (dental model and fixation not included)
The new frasaco universal articulator UAV made from hard thermo-setting plastic material with patented adjustable mandible allows the usage of all dental models with mounting thread M6 in stable occlu-sion (except AG-3 IB). Included is a short rod with a snap-in stopper to assure a stable fixation of the model during „treatment“. When used with the optional oral cavity mask P-6 GP, even working with water is possible. In addition to its usage in the PH-1 phantom heads the frasaco UAV universal articulator can also be used for working in the hand or screwed to existing phantom head fixation rods with a diameter of smaller or equal to 12mm.
The new frasaco PH-2 phantom head is ideal for users that are looking for an inexpensive product without accepting compromises in the jaw part properties. Its precision articulator system is exactly the legendary one that made the frasaco P-5/3 series the international standard for under- and postgraduate courses worldwide.The skull dome and face mask however are reduced to the front part only, so the artificial patient’s face will have the familiar look of the P-5/3, while the detachable front parts allow easy changing of face mask and dental models. An inner cheek mask is available for working with water.
Using a frasaco mounting system, PH-2 can easily be brought into all necessary working positions.
PH-2 is also a perfect start into the world of the frasaco simulation system, as there is even an upgrade – kit to turn the PH-2 into a P-6/3 at a later stage. (dental model and fixation not included)
The phantom head holder P-HA can be used to easily fasten model jaws without demonstration articulator in a phantom head PH-1 in a fixed working position. It also allows the use of the oral cavity mask P-6 GP. P-HA is especially recommended for the local anaesthesia training model AG-3 IB, which cannot be mounted to the hard plastic articula-tor series DA, DAV or UAV due to its raising branches of the lower jaw
��
��
P-6 GP
P-6 WI
P-6 ISL
P-6 H
P-6 F
P-6 GTS
P-6 GTM
P-6 GTL
accessories for low cost phantom heads PH-1 and PH-2
phan
tom
hea
ds
www.frasaco.com
The new frasaco oral cavity mask can either be used instead of the standard face mask with phantom head series P-6, P-5 or PH-2 or in addition to it as an inner face mask.It encloses the model jaws completely and so allows working with water spray. Simulation exercises with limited space and realistic elasticity are made possible by using this oral cavity mask. As a nice side effect when using such a mask in a phantom head, the phantom head articulator is always kept clean.
water drainage nozzle for P-6 GP fitting to P-6 ISL hose
water drainage system for oral cavity mask P-6 GP
water drainage hose (1.20 m), inner diameter 6 mm
support for water collector bottle
water collector bottle
face half masks series P-6 GT made of thermoplastic elastomer material fitting frasaco phantom head series PH-1 and PH-2 are used for simulating the limited space of the mouth opening and giving a realistic look but have no sealing function. To be able to work with water spray, an oral cavity mask P-6 GP is needed. Choice of 3 different sizes of mouth openings.
face mask with mouth opening size Ssmall size mouth opening matching oral cavity mask P-6 GP, also recommended as pediatric face mask
face mask with mouth opening Mmedium size mouth opening, corresponding to the previous frasaco face masks
face maks with mouth opening Llarge size mouth opening
Example for ordering a complete frasaco phantom head
Phantom head 1 frasaco phantom head PH-2 1 frasaco face half mask P-6 GTMMasks 1 frasaco oral cavity mask P-6 GP 1 frasaco water drainage nozzle P-6 WIHose 1 water drainage hose (1.20 m) P-6 ISLBottle 1 water collector bottle P-6 FModel 1 upper and lower model jaws frasaco AG-3Mounting 1 frasaco table mounting assembly P-TDG
��
AG-3 DAD 16 K
PH-1 PT
PH-2 PT
P-6/3 PT
P-6/3 PA
complete sets
Dental Exercise Unit complete with:phantom head P-6/3face mask P-6 GMdental model AG-3table mounting plate P-A
Recommendations for usage: For exhibitions or demo - situations.
www.frasaco.com www.frasaco.com
Dental Exercise Unit complete with:dental model AG-3 DAhinged support DAD 16 K
Recommendation for usage: exercises without water, e.g. oral prophylaxis training on a workbench freely accesible from all sides.
Dental Exercise Unit complete with:phantom head PH-1face half mask P-6 GTMdental model AG-3 with frasaco universal articulator UAVtable mounting assembly P-TDG Recommendation for usage: Table mounting allows working in 9 to 12 o'clock position. For exercises without water with different frasaco DA-models.
Dental Exercise Unit complete with:phantom head PH-2face half mask P-6 GTMdental model AG-3 table mounting assembly P-TDG Recommendation for usage: Table mounting allows working in 9 to 12 o'clock position. The articulator part, which has already been successfully on the market in the frasaco P-5/3 and today's P-6/3 series allows the simulation of anatomically correct jaw movements.
Dental Exercise Unit complete with:phantom head P-6/3face mask P-6 GMdental model AG-3table mounting assembly P-TDGP
Recommendation for usage: phantom head with table mounting for working in 9 to 12 o'clock sitting position, left-or right hand.
��
��
P-6/3 PS
P-6/5 TS
P-6/3 TS
complete sets
phan
tom
hea
ds
Dental Exercise Unit complete with:phantom head P-6/3face mask P-6 GMdental model AG-3chair mounting assembly P-S
Recommendation for usage: Phantom head for mounting on a dental chair for ergonomic simulation close to the real patient situation.
www.frasaco.com
Dental Exercise Unit complete with:phantom head P-6/5face mask P-6 GMdental model AG-3limitation of head movementshoulder torso P-6 TS with belts for fixation on a dental chair
Recommendation for usage: Phantom patient for mounting on a dental chair for ergonomic simulation close to the real patient situation.
Dental Exercise Unit complete with:phantom head P-6/3face mask P-6 GMdental model AG-3limitation of head movementshoulder torso P-6 TS with belts for fixation on a dental chair
Recommendation for usage: Phantom patient for mounting on a dental chair for ergonomic simulation close to the real patient situation.
��
mounting assemblies for phantom heads and dental models
www.frasaco.com www.frasaco.com
Part No.:
Figure:
Description /recommended use:
Application:
Model support for demon-stration purposes.Recommended for all den-tal models with demon-stration articulators DA, DAV and UAV.
Hinged support for training upper jaw and lower jaw treatment positions.Recommended for all den-tal models with demon-stration articulators DA, DAV and UAV.
Table mounting demon-stration plate for phantom heads.Recommended for phan-tom heads P-6/5 and P-6/3
Table mounting assembly with clamp. double ball-joint and guidance rod.Recommended for dental models with demonstration articulators DA, DAV and UAV.
Mounting assembly with aluminium block to be fixed underneath bench-top. Extensible rod can be fixed at required length.Double ball-joint and guidance rod for swivel mounting of dental models with demonstration articu-lators DA, DAV and UAV underneath workbenches.
��
��mounting assemblies for phantom heads and dental models
phan
tom
hea
ds
www.frasaco.com
Table mounting assembly with clamp, double ball-joint and guidance rod. Recommended for phan-tom heads P-6/5*, P-6/3*, PH-1 and PH-2.
Mounting assembly with aluminium block to be fixed underneath bench-top. Extensible rod can be fixed at required length. Double ball-joint and guidance rod for swivel mounting of phantom heads P-6/5 *, P-6/3 *, PH-1 and PH-2.
Mounting assembly with plate or aluminium guide rail* for fixation to the table side. Ball-and-socket joint and guidance rod for swi-vel mounting of phantom heads P-6/5 and P-6/3.
Telescopic dental chair mounting assembly with safety belt. Recommended for phantom heads P-6/5 and P-6/3.
Lift-O-Mat mounting device for fixing to the table side or to a contai-ner*. Guidance rod can be extended, adjusted in height rotated and fixed in all required treatment positions. Also available in a special 180 hinged version (price on request). Recommended for phan-tom heads P-6/5 and P-6/3 with shouder-torso.
Lift-O-Mat mounting with sliding device for fixing to the table side. Guidance rod can be extended, adjusted in height, rotated and fixed in all required treatment positions. Also available in a special 180 hinged version (price on request). Recommended for phantom heads P-6/5 and P-6/3 with shoulder-torso.
��
45° 10°
75°75°
45° 45°
dental training systems – dental chair fixation – alternate use
www.frasaco.com www.frasaco.com
��
��dental training systems – sliding table mounting
phan
tom
hea
ds
Assembly and operating dimensionsupon request
www.frasaco.com
Dental training system P-6/3 TLVcomplete with:phantom head P-6/3face mask P-6 GMdental model AG-3limitation of head movementshoulder torso P-6 TLift-o-Mat with sliding device P-TLV 350
Dental training system P-6/5 TLVcomplete with:
phantom head P-6/5face mask P-6 GMdental model AG-3
limitation of head movementshoulder torso P-6 T
Lift-o-Mat with sliding device P-TLV 350
��
��� ���
������
��� ��� ��� ���
������
��� ���
dental training systems – table mounting
Dental training system P-6/3 TLcomplete with:phantom head P-6/3face mask P-6 GMdental model AG-3limitation of head movementshoulder torso P-6 TLift-o-Mat P-TL 350
Dental training system P-6/5 TLcomplete with:phantom head P-6/5face mask P-6 GMdental model AG-3limitation of head movementshoulder torso P-6 TLift-o-Mat P-TL 350
Assembly and operating dimensionsupon request
www.frasaco.com www.frasaco.com
�0
��dental training systems – container mounting assembly
Assembly and operating dimensionsupon request
phan
tom
hea
ds
www.frasaco.com
��
dental training systems – dental simulators
www.frasaco.com www.frasaco.com
Being a strategic partner of leading manufacturers that specialize in turnkey projects for complete phantom labs, frasaco can offer tailor-made solutions exactly fitting your individual needs, thanks to the modular design of our dental training systems. Should you require assistance in contacting manufacturers of such simulation workstations we should be glad to do so.
��
www.frasaco.com www.frasaco.com
sundriesfrasaco patented dispensers:
* quick and simple single-handed operation * band or cord exactly in the required length with neat and even cuts * economical use and reduced waste * available for matrix band, polishing band, and retraction cord * one time purchase of the dispenser, cost reducing refill rolls available
frasaco – strip crowns:
* renowned matrices for fast and clean temporary restorations * elastic, thin and easy to cut, packed antistatically * pedodontal strip crown available for restoration of badly damaged deciduous teeth* wide range covering all required sizes * assortments for proper storage and choice, refill-packages available
��
��strip crowns
sund
ries
www.frasaco.com
Save time and money with frasaco strip crowns, achieving optimum efficiency in no time. Even for multip-le layer technique, strip crowns can be used as matrix to shape the final layer.
frasaco strip crowns are elastic, thin and easy to cut celluloid crowns.In the transparent execution they are light-transmissive for polymerization light. They are used as moulds for creating temporary restorations on preparations and as matrices for restoration of corners and edges. They are placed without problem using any conventional material for temporary restorations. A strip crown in the required size and shape is adjusted to the cervical area and the gingival margin with a crown scissor. Please request manufacturers' adresses for products we have tested for this application.Prior to placement, ensure that strip crown and preparation are clean and dry. Fill the strip crown with temporary filling material and place it. Strip crowns can be used as matrices when restoring corners and edges – even when using composites. When doing so, cut out that section of the strip crown corresponding to the part of the tooth being restored, allowing for the strip crown to overlap the margins of the cavity. Fill the matrix with the definite filling material and press it into place. Remove the matrix after the filling material has set. Should for some reason strip crowns remain for a few days on a tooth, please make sure that their gingival edge is no deeper than 1mm inside the sulcus to avoid pos-sible traumatisation of the marginal periodontium. Under no circumstances should strip crowns remain for longer than 30 days in the mouth.
��
strip crowns – forms and sizes
116 115 114 113 112 111 110
125 124 123 122 121 120
136 135 134 133 132 131 130
144 143 142 141 140
163 162 161 160
463 462 461 460
444 443 442 441 440
434 433 432 431 430
422 421 420
413 412 411
www.frasaco.com www.frasaco.com
central incisors – right upper
lateral incisors – right upper
canines – right upper
first premolars – right upper
first molars – right upper
first molar – right lower
first premolars – right lower
canines – right lower
lateral incisors – right lower
central incisors – right lower
��
��
sund
ries
210 211 212 213 214 215 216
220 221 222 223 224 225
230 231 232 233 234 235 236
240 241 242 243 244
260 261 262 263
360 361 362 363
340 341 342 343 344
330 331 332 333 334
320 321 322
311 312 313
www.frasaco.com
central incisors left upper –
lateral incisorsleft upper –
caninesleft upper –
first premolarsleft upper –
first molarsleft upper –
first molarsleft lower –
first premolarsleft lower –
caninesleft lower –
lateral incisors left lower –
central incisorsleft lower –
��
ST-5K
ST-FK174
ST-BK96
ST-FBK 58
transparent strip crowns
www.frasaco.com www.frasaco.com
5 transparent strip crowns of any one size refill package
please request our order form for strip crowns
anterior assortment174 transparent strip crownsplastic box with transparent cover3 each of every size in 58 compartments
posterior assortment96 transparent strip crownsplastic box with transparent cover3 each of every size in 32 compartments
compact assortment (current anteriors and posteriors)58 transparent strip crownsplastic box with transparent cover1 strip crown of each one size in 58 compartments
��
��
ST-FBE 58
ST-BE96
ST-5E
ST-FE174
coloured strip crowns
sund
ries
www.frasaco.com
compact assortment (current anteriors and posteriors)58 coloured strip crownsplastic box with transparent cover1 strip crown of each one size in 58 compartments
posterior assortment96 coloured strip crownsplastic box with transparent cover3 each of every size in 32 compartments
5 coloured strip crowns of any one sizerefill package
please request our order form for strip crowns
anterior assortment174 coloured strip crownsplastic box with transparent cover3 each of every size in 58 compartments
��
ST-K5K
ST-K5E
ST-KK72
ST-KE72
pedodontal strip crowns
514 513 512 511A 511
534 533 532 531 631 632 633 634
5 transparent strip crowns of any one size, refill package
5 coloured strip crowns of any one size, refill package please request our order form for strip crowns
www.frasaco.com www.frasaco.com
611 611A 612 613 614
524 523 522 521A 521 621 621A 622 623 624
Pedodontal strip crowns
Placing prefabricated frasaco pedodontal strip crowns is an excellent technique for retaining badly damaged deciduous teeth.
In earlier times, deciduous teeth with carious defects were extracted once these exceeded a certain stage. Nowadays, they are left in the mouth as a spacer as it is now known that the deciduous teeth are important for the unimpeded development of children’s jaws. The advances made in conservative dentistry have changed the manner in which this field is approached. Reference should also be made to aesthetic and phonetic aspects.
We have kept pace with these changes by supplying our pedodontal strip crowns in several sizes. Allergies, which can be caused by other crown materials, are virtually eliminated.
Please request manufacturers' adresses for crown scissors which we have tested for this application.
central incisors
lateral incisors
canines
pedodontal strip crown assortment72 transparent strip crowns for upper anteriorsplastic box with transparent cover3 strip crowns of each one size in 24 compartmentsUpper 511-514, Upper 521-524Upper 531-534, Upper 611-614Upper 621-624, Upper 631-634
pedodontal strip crown assortment 72 coloured strip crowns for upper anteriors, plastic box with transparent cover 3 strip crowns of each one size in 24 compartments
�0
��
US-15PKE
US-15PKN
US-15PEE
US-75KE
US-75KN
US-75EE
US-15PKEN
US-15PKNN
US-15PEEN
US-15PKEN E
US-15PKNN E
US-15PEEN E
US-120KE
US-120KN
US-120EE
matrix strips and dispensers
sund
ries
www.frasaco.com
Tear resistant, plastic universal strips for use with auto-curing and light-curing composites and cements. For use when shaping the restorations for class II, III, IV and V cavities
• Transparent • Extra thin, or standard thickness (retains its stability when being used for larger cavities) • Yellowish-transparent (not recommended for light polymerization ) - makes the band easier to see on the tooth or cabinet top
Enjoy the one time purchase of the patented matrix band dispenser, refill rolls are available at an attractive price.
matrix band dispenser incl. matrix band roll, length:15 m width: 8.5 mm
transparent extra thin: 0.05 mm
transparent standard thickness 0.08 mm
yellowish-transparent extra-thin: 0.05 mm
universal strips, curved, length: 75 mm width: 8.5 mm, package containing 50 pieces
transparent extra thin: 0.05 mm
transparent standard thickness 0.08 mm
yellowish-transparent extra thin: 0,05 mm
matrix band refill roll, length: 15 m width: 8.5 mm, package containing 3 rolls
transparent, extra thin: 0.05 mm
transparent, standard thickness 0.08 mm
yellowish-transparent, extra-thin: 0.05 mm
package with 1 refill roll, transparent, extra thin: 0.05 mm
package with 1 refill roll, transparent, standard thickness 0.08 mm
package with 1 refill roll, yellowish-transparent, extra-thin: 0.05 mm
universal strips, straight, length: 120 mm width: 8.5 mm, package containing 50 pieces
transparent extra thin: 0.05 mm
transparent standard thickness 0.08 mm
yellowish-transparent extra thin: 0,05 mm
��
AS-R03NAS-G30NAS-W60N
AS-R03EAS-G30EAS-W60E
SH-3
AS-S
AS-R03
AS-G30
AS-W60
polishing bands and dispensers
Tear resistant, plastic polishing band coated with 3 different grain sizes for polishing and finishing of obturations. Enjoy the one time purchase of the polishing band dispenser and load the cost-reducing refill rolls.
www.frasaco.com www.frasaco.com
polishing band refill roll, length: 7 m width: 4 mm
package containing 3 rolls refill roll rose 3 microns refill roll green 30 microns refill roll white 60 microns
package containing 1 roll refill roll rose 3 microns refill roll green 30 microns refill roll white 60 microns
desk stand for 3 dispensers of your choice (dispensers not included)
polishing band dispenserincl. polishing band roll length: 7 m width: 4 mm basic kit with 3 dispensers and 3 polishing band rolls white 60 microns green 30 microns rosé 3 microns
polishing band dispenser incl. polishing band rolllength: 7 m width: 4 mm
rosé 3 microns
green 30 microns
white 60 microns
��
��
sund
ries
www.frasaco.com
general commercial conditions
The following conditions apply also to future business with the buyer, even if not ex-pressly referred to it. Different purchasing conditions of the buyer obligate frasaco only,if expressly recognized. Should individual regulations be or become ineffective, thenthe remaining conditions will not be affected.
1. Generala) All quotations are to be understood without compromise, subject to availability and
prior sales.b) Only frasaco’s order confirmation will be binding. All modifications are subject to
amendments in writing.c) The present conditions shall apply for all transactions during continuous business
relations, even if not expressly referred to.
2. Pricesa) The sales prices as per the price list in force will apply, frasaco reserve, however,
the right to modify prices without prior notification.b) All prices are to be understood in (Euro) ex works Tettnang, excl. of
packing, transport insurance, freight, customs duty, import taxes and fees; saleswithin Germany are subject to additionnally payable V.A.T.
c) Minimum order value is determined at 50,00. A service charge of 10,00shall apply for small orders of up to 200,00 amount of invoice.
3. Obligation of Delivery and Receptiona) The delivery time will begin upon receipt of all information and documents which
are required for the execution of the order, down payment and, if so agreed, pur-chaser’s punctual supply of materials. In case of delays not imputable to frasacodelivery time is deemed to be complied with upon notification that goods areready for dispatch.
b) If the previously agreed delivery time is not complied with due to frasaco’s fault,however neither by severe negligence nor intention, the purchaser is entitled, to theexclusion of all other rights, to claim penalty of 0,5 % for each complete week oflate delivery, however, only up to a maximum of 5 % from the value of the delayedportion of the order.
c) Partial deliveries are allowed, as well as reasonable deviations of up to ± 10% fromthe ordered quantity. Part deliveries must be paid separetely; frasaco is not liableto continue deliveries prior to the reception of corresponding payments.
d) If the purchaser refuses the reception of the merchandise despite of having beenenforced, frasaco has the right to sell the ordered merchandise at random.
e) Samples, if not otherwise agreed upon, shall be invoiced within 30 days from dateof delivery.
f) frasaco may accept merchandise in perfect condition and with original packing tobe returned freight prepaid at a date previously agreed upon. If firmly ordered andinvoiced merchandise is returned for reasons not imputable to frasaco receptionmay be refused. Credit notes for returned merchandise will be issued only if origi-nal invoice and packing list are presented. In any case, a handling fee of 50,00plus a service charge of 15 to 20% from the value of the merchandise will be in-voiced. Returns of custom made merchandise and of merchandise delivered by fra-saco more than 3 months ago will not be accepted.
g) In case of force majeure frasaco is entitled to postpone deliveries for the durationof the impediment and a reasonable start-up allowance or to withdraw partially ortotally from the execution of the order. Strike, lockout and unpredictable circum-stances, e.g. plant break-downs, which prevent frasaco, despite the exercise of allreasonable efforts from delivery on time, are equivalent to force majeure, subject tobe proven by frasaco. This shall also apply to impediments occuring during alrea-dy delayed deliveries or to subcontractor’s supplies. The purchaser may ask fra-saco to declare within two weeks to withdraw from the execution of the order or to deliver within a reasonable additionnal term. The purchaser may withdraw from the unfulfilled part of the order if frasaco fails to declare its position. frasaco shall in-form the purchaser immediately in case of force majeure to minimize damages tothe purchaser.
4. Packing, Transport, Transfer of Riska) frasaco will choose packing, means and routing of transport to its best ability.
Packing will be invoiced at cost and shall not be returned.b) Transport insurance to purchaser’s account will be taken by frasaco. In case of da-
mages during transport, a corresponding average report must be issued by thehandling post office or forwarding agent and sent immediately to frasaco.
c) Risk shall pass to the purchaser as soon as the merchandise leaves frasaco’sworks, even when delivered freight prepaid. If delivery is postponed for reasons im-putable to the purchaser, risk shall pass to the purchaser as soon as frasaco hasgiven notification that merchandise is ready for shipment.
5. Retention of Propertya) All delivered merchandise shall remain property of frasaco until all its claims against
the purchaser have been settled, even if payment for specified deliveries has beenalready received. In case of current account business frasaco shall retain the titleto the delivered merchandise as security for any outstanding balance owed bythe purchaser. Should frasaco incur liability arising from documentary acceptanceestablished for a purchase, property shall pass to the purchaser only after the purchaser as drawee has honoured completely the corresponding drafts. Thepurchaser is not entitled to pledge or seize the merchandise unless it is fullypaid up.
b) In case of resale, the purchaser herewith assigns to frasaco, until all its claimshave been satisfied, any claim for payment or otherwise which the purchaser mayhave against his customers, along with all subsidiary rights. Upon request of fra-saco the purchaser shall forward all information and documents which are ne-cessary to enforce frasaco’s right against the purchaser’s customer.
c) If merchandise subject to retention of property is to be pledged to or seized by athird party the purchaser shall inform frasaco immediately. All costs related to cor-responding intervention are to purchaser’s account.
6. Warranty and Liability
a) frasaco reserve the right to change without prior notice construction or execution of its products according to the technical development or to remove products fromthe delivery program. Particulars contained in catalogues, leaflets, advertisementsor demonstration objects are not binding; this shall also apply to reproductions,drawings, dimensions and weights mentioned in or attached to quotations, if nototherwise stated.
b) Quality and workmanship of the products shall be determined by reference to the production samples which frasaco will, upon purchaser’s request, submitfor examination. Any warranty in respect of specific characteristics of the merchandise or in respect of the performance of moulds shall only be valid ifstated in writing.
References to technical standards shall serve as basic specification. Thewarranty does not extend to subsidiary risks or losses due to defects of themerchandise.
c) Any complaint must be made immediately in writing, upon receipt of the deliveredmerchandise. In case of justified claim, under consideration of quality and work-manhip by reference to the production samples approved in writing by the purcha-ser, the defective parts will be repaired or replaced to frasaco’s choice. Should replacements or repair fail, then the buyer may recur to the legally stipulated terms of warranty. Upon frasaco’s request, replaced parts must be returned freight prepaid. In any case warranty claims shall expire six months after receipt of the mer-chandise by the purchaser.
d) Unauthorized repairs and improper treatment by the purchaser shall relievefrasaco from all warranty claims.
7. General Limitation of LiabilityIn all cases where, based either on contract or legal terms, frasaco’s liability for da-mages differs from the stipulations in the present general conditions, it shall only beliable in so far as it can be proven to have acted intentionally or with severe negli-gence.
8. Terms of Paymenta) All payments shall be made in (Euro) to frasaco only. Cash discounts on pay-ments shall only be granted when all previously due invoices have been settled completely. No cash discount will be allowed for documentary payments or drafts.b) frasaco’s invoices for supplies within Germany are payable within 14 days from
date of invoice less 2% cash discount or net, within 30 days from date of invoice.In case of full payment in advance 3 % cash discount on the net value of the mer-chandise will be granted. All invoices for an amount of less than 200,00 as wellas for repairs and services are payable immediately net upon receipt of invoice.
c) For export orders, unless otherwise agreed, an irrevocable letter of credit shall be established through a first class bank to be confirmed by a german bank, payableagainst first presentation of shipping documents, whereby all banking fees andcharges shall be to purchaser’s account. Payments in foreign currency will beaccounted at the current exchange rate to purchaser’s risk. All fluctuations of theexchange rate, as well as banking fees and charges shall be borne by the pur-chaser and shall be due for immediate payment.
d) Should the agreed terms of payment be exceeded, interest at the rate of 8% abovethe prevailing basic interest rate of the European Central Bank will be charged.
e) frasaco reserve the right to refuse payment by cheques or rediscountable billsof exchange which may only be accepted subject to its subsequent payment. All corresponding fees, especially discount charges, shall be born by the purchaser.
f) The purchaser shall not be entitled to exercise rights of compensation or retentionagainst frasaco’s claims.
g) Should the purchaser fail to comply with the terms of payment, or should circum-stances arise which cast serious doubts on his creditworthyness, all claims offrasaco shall become due immediately.
9. Moulds (Tooling)a) The prices for moulds are to be understood inclusive of production cost for one set
of samples, however, exclusive of any cost for testing and treatment appliances;alterations required by the purchaser are not included. The production cost for ad-ditionnally required samples shall be borne by frasaco if the reasons for this requestare imputable to frasaco.
b) Unless otherwise agreed, frasaco shall be and remain owner of any moulds madefor the purchaser by frasaco or by third party to frasaco’s order. Moulds will only be used for the purchaser’s order as long as the purchaser meets his obligationsof payment and reception of delivery. frasaco shall only replace these moulds freeof charge if so required to produce the ascertained manufacturing quantity.frasaco’s obligation to store the moulds shall expire two years after the last deli-very of parts out of these moulds and after prior notification of the purchaser.
c) If it is agreed that the purchaser should become owner of the moulds, title of themoulds shall pass to the purchaser upon payment of the correspondingsales price. frasaco’s obligation to deliver the moulds to the purchaser shall be sub-stituted by its obligation to keep it in safe custody. frasaco shall mark the moulds as being third party property and shall have it insured upon request of the pur-chaser to purchaser’s expense.
d) Where the moulds are the purchaser’s property and/or where moulds have been loaned by the purchaser to frasaco, frasaco’s liability as to safe storage and main-tenance shall be limited to the care as adopted in its own affairs. frasaco’s obli-gations shall elapse if, after completion of the order and upon frasaco’s request themoulds are not collected by the purchaser within a reasonable time. As long as thepurchaser has not fully met his contractual obligations, frasaco shall, in any case,have a lien on the moulds.
10.Materials placed at frasaco’s disposala) In case where materials are to be placed at frasaco’s disposal, the purchaser shall
deliver them to frasaco in good time with an excess in quantity of at least 5% inperfect condition and at purchaser’s expense and risk.
b) If the purchaser fails to comply with these conditions frasaco shall be entitled to areasonable extension of the delivery time. Other than in case of force majeure, anyadditonal cost shall be borne by the purchaser, including those which may arisefrom interruptions of production.
11.Patent Rightsa) In cases where frasaco is to produce in accordance with drawings, models or pat-
terns, or to use parts placed at its disposal by the purchaser, the purchaser gua-rantees for third party proprietary rights not being infringed. frasaco will draw thepurchaser’s attention to existing rights which are known to frasaco. The purchasershall hold frasaco harmless against third party claims and remedy any damagewhich may be caused. If a third party prohibits frasaco to continue manufacture ordelivery on the strength of an alleged patent right frasaco shall, without in-vestigation of the legal situation, be entitled to suspend the work.
b) Any drawing or patterns sent to frasaco which do not lead to an order shall be re-turned upon purchaser’s request; otherwise, frasaco shall be entitled to destroythem three months after submission of quotation.
c) All copyrights and, if applicable, industrial property rights in any models, moulds,tooling or equipment, sketches and drawings produced by frasaco or by a thirdparty to frasaco’s order shall belong to frasaco.
12.Place of Fulfilment and Jurisdictiona) The place of fulfilment for both parties to the contract shall be Tettnang.b) Court jurisdiction for both parties shall be Tettnang, frasaco reserve, however, the
right to institute proceedings against the purchaser at the competent court ofpurchaser’s domicile.
c) German law shall exclusively be applicable.
��