Mido 500

Post on 15-Mar-2016

214 views 0 download

description

Packaging:  1 kg, 5 kg, 18 kg. Technical Characteristics:  Finish: Glossy  Color: White and according to Mido Color Index  Solid content by weight: 45 ± 2% and differs according to the product color.  Specific Gravity: 1 ± 0.1 g / cm 3  Viscosity: 100 ± 10 Krebs  Spreading Rate: 6 – 7 m 2 / kg at thickness of dry film 35 – 45 micron. Pharos Plus is a glossy Synthetic paint for interior use. Surface Preparation: Handling: Description: Lk;lk 1

Transcript of Mido 500

1 Mido Co. Borg Al Arab, 2nd

Industrial Zone – PHONE +203 4059 3555 – FAX +203 4592655 – www.midoc.com | [International Group for Modern Coating (Mido)]

Mido 500

Lk;lk

T

E

C

H

D

A

T

A

Application Method / Application

Tools:

Brush – Roller – anaerobic

spray gun – ordinary spray gun.

Diluting: Turpentine – mineral

oil – petrol ( maximum 10%).

Cleaning: Turpentine – mineral

oil – petrol.

Surface Preparation:

All new and already-painted surfaces

should be dry and free from dust,

grease, and wax … etc.

Recommended Painting System:

Wooden Surfaces: Sand the surface well and remove all dust – Apply one thin coat of Mido 500 – Finish with 1-2 coat(s) of Mido 500.

Cement and Concrete surfaces: Apply putty if necessary – Apply one thin coat of Mido 500 – Finish with 1-2 coat(s) of Mido 500.

Steel Surfaces: Sand well and remove all rust – Apply one coat of Pharo Primo primer – Finish with 1-2 coat(s) of Mido 500.

Validity:

Valid for two years from the date of

production, provided the safety of the

packaging and storage under the right

conditions away from direct sunlight.

Handling:

Stir the product well before use.

Packaging:

1 kg, 5 kg, 18 kg.

Description:

Pharos Plus is a glossy Synthetic paint

for interior use.

Advantages:

High gloss

Bright white

Excellent hiding power

Recommended Uses:

Mido 500 is used to get glossy

finishes.

Mido 500 is used in painting

concrete, cement, wood and

steel surfaces.

Technical Characteristics:

Finish: Glossy

Color: White and according to Mido Color Index

Solid content by weight: 45 ± 2% and differs according to the product color.

Specific Gravity: 1 ± 0.1 g / cm3

Viscosity: 100 ± 10 Krebs

Spreading Rate: 6 – 7 m2 / kg at thickness of dry film 35 – 45 micron.

Drying time: (at 25O C and 60% of

relative humidity)

Surface Dry: 3 - 4 hours

Complete Dry: 18 hours

Repainting Time:

o The minimum: 16 hours

o The maximum: N/A