Mido 500
-
Upload
mohamed-khamis -
Category
Documents
-
view
214 -
download
0
description
Transcript of Mido 500
1 Mido Co. Borg Al Arab, 2nd
Industrial Zone – PHONE +203 4059 3555 – FAX +203 4592655 – www.midoc.com | [International Group for Modern Coating (Mido)]
Mido 500
Lk;lk
T
E
C
H
D
A
T
A
Application Method / Application
Tools:
Brush – Roller – anaerobic
spray gun – ordinary spray gun.
Diluting: Turpentine – mineral
oil – petrol ( maximum 10%).
Cleaning: Turpentine – mineral
oil – petrol.
Surface Preparation:
All new and already-painted surfaces
should be dry and free from dust,
grease, and wax … etc.
Recommended Painting System:
Wooden Surfaces: Sand the surface well and remove all dust – Apply one thin coat of Mido 500 – Finish with 1-2 coat(s) of Mido 500.
Cement and Concrete surfaces: Apply putty if necessary – Apply one thin coat of Mido 500 – Finish with 1-2 coat(s) of Mido 500.
Steel Surfaces: Sand well and remove all rust – Apply one coat of Pharo Primo primer – Finish with 1-2 coat(s) of Mido 500.
Validity:
Valid for two years from the date of
production, provided the safety of the
packaging and storage under the right
conditions away from direct sunlight.
Handling:
Stir the product well before use.
Packaging:
1 kg, 5 kg, 18 kg.
Description:
Pharos Plus is a glossy Synthetic paint
for interior use.
Advantages:
High gloss
Bright white
Excellent hiding power
Recommended Uses:
Mido 500 is used to get glossy
finishes.
Mido 500 is used in painting
concrete, cement, wood and
steel surfaces.
Technical Characteristics:
Finish: Glossy
Color: White and according to Mido Color Index
Solid content by weight: 45 ± 2% and differs according to the product color.
Specific Gravity: 1 ± 0.1 g / cm3
Viscosity: 100 ± 10 Krebs
Spreading Rate: 6 – 7 m2 / kg at thickness of dry film 35 – 45 micron.
Drying time: (at 25O C and 60% of
relative humidity)
Surface Dry: 3 - 4 hours
Complete Dry: 18 hours
Repainting Time:
o The minimum: 16 hours
o The maximum: N/A