1DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2

MCC Live Tooling

Brochure

2DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2

1. B-axis Modular Tooling System for L220 and L32

2. Slitting Saw Attachment for L32 Back-work

3. Hobbing on L220/L32 Gang by BT-SSA1000-ASM

4. Hobbing by Supported Solid Arbor Spindle with GSE3310

5. Tandem End-Face Spindle for Backwork for L220

Outline

3DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2

L220 type XII1. B-axis Modular Tooling System

4DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2

1. B-axis Modular Tooling System L32 type XII

5DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2

1. B-axis Modular Tooling System L32 type XII

Part#: BT-GSE-L32-T12-ASM

6DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2

2. Slitting Saw AttachmentPart#: BT-SSA1000-ASM

L32 series

Back-work

7DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2

2. Slitting Saw AttachmentPart#: BT-SSA1000-ASM

L32 series

Back-work

8DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2

Special Arbor for Hob cutter is required

separately

• Max. Cutter OD: 32mm

• Max. Cutter Width: 26mm

• Max. Helix Angle: +/- 2 Deg.

3. Hobbing on L220/L32 Gang by BT-SSA1000-ASM

L32 type VIII,X

L220 type VIII,XPart#: BT-SSA1000-ASM

9DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2

[Spec for Spur gear]

• 1~2 Deg. Helix Angle

can be obtained.

• Both-ends support

arbor is available.

L32 type VIII,X

L220 type VIII,X

3. Hobbing on L220/L32 Gang by BT-SSA1000-ASM

10DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2

4. Hobbing by Supported Solid Arbor Spindle with GSE3310

L32 type VIII,X

L220 type VIII,XPart#: BT-HBA1080-L2032

11DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2

L32 type VIII,X

L220 type VIII,X

• Arbor OD: 8mm

• Max. Cutter OD: 32mm

• Max. Cutter Width: 32mm

• Max. Helix Angle: +/- 45 Deg.

• Supported Solid Arbor

4. Hobbing by Supported Solid Arbor Spindle with GSE3310

Part#: BT-HBA1080-L2032

12DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2

L32 type VIII,X

L220 type VIII,X

4. Hobbing by Supported Solid Arbor Spindle with GSE3310

13DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2

L32 type VIII,X

L220 type VIII,X

4. Hobbing by Supported Solid Arbor Spindle with GSE3310

14DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2

4. Hobbing by Supported Solid Arbor Spindle with GSE3310

L220 type XII

15DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2

5. Tandem End-Face Spindle for Backwork

L220 type X, XIIPart#: BT-TES1000

16DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2

5. Tandem End-Face Spindle for Backwork

L220 type X, XII

• Gear Driven Construction

• 2 - ER11 Spindle

• Can be used with

previous L20X as well

Part#: BT-TES1000

17DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2

5. Tandem End-Face Spindle for Backwork

L220 type X, XII