Static & Live Tooling - DHM Tools
Transcript of Static & Live Tooling - DHM Tools
Special Live Tool Inquiry Form
Fill in the form below and fax it to (847) 367-4815, or visit www.lyndexnikken.com and complete the form online. Lyndex-Nikken engineers will help you to determine the best live tool for your application.
Please specify machine model and turret configuration (12 or 20 stations):
Please specify design configuration:
Please specify holding system and cutting tool specifications:
Company ___________________________________________ Name _______________________________________________
Address ___________________________________________________________________________________________________
Zip _________________________________________________ City _________________________________________________
Phone ______________________________________________ E-mail _______________________________________________
Holding System
Preferred type of holding system (ER, Shrink Fit, Shell Mill Arbor, etc.): ___________________________________________
Application and Cutting Tool Specifications
Type of material: ___________________________________________________________________________________________
Type and nature of application (milling, drilling, reaming, slitting, etc.): ____________________________________________
Size of cutter (diameter): ___________________________________________ Overall length of cutter: ___________________
Flute length: ___________________ Requested RPM: ______________________ Requested torque: ___________________
Coolant Requirements
External/Internal: ___________________ Requested pressure capabilities: __________________________________________
Number of nozzle ports: ________________ Coolant pipe design or configuration specifications: _____________________
Fax: (847) 367-4815 Email: [email protected]
Standard: 1) straight 2) 90º (reducer/speeder)
Offset Multi Output: 1) straight Adjustable Y straight Adjustable Angle Fixed Angle 2) 90º
Offset: 1) straight 2) 90º
Saw Blade Holder: 1) straight 2) 90º
Multi Output: 1) straight 2) 90º
NL and DuraTurn Series NZ Series NT Series
12 station turret 20 station turret
T1 Upper
Main Sub
T1 Upper T2 Upper
Main Sub
T3 Lower
Main Sub
T1 Lower
M O R I S E I K I S T A T I C & L I V E T O O L I N G
1
Table of Contents
SpecialsCustom-made live tools can be engineered for your specific application. Please direct your request to our office (see special live tool inquiry form). Our engineering staff is ready to assist you with your specific tooling needs.
Live Tool Part Numbering SystemTool Nose / Output Axis
ER25 X
ER25 ER25 x
TRX75 Milling Chuck 3/4” y
EMH10 End Mill 1” z
EMH25MM End Mill 25mm -
SM1 Shell Mill 1” -
SM22MM Shell Mill 22mm -
CAPTO4 Capto 4 -
OD10 OD Turning 1” -
CO10 Cut-Off 1” -
BG10 Boring 1” -
BGS20 Boring with Slot 2” -
CH15 Combination 1.25” -
ID75 Face Turning 1.1/4” -
Speed / Torque
HS High-speed
HS
Max. Int. Coolant Pressure
CST
7MP 7MP (1000PSI)
2MP 2MP (200PSI)
CST 7MP (1000PSI)
C-STAT 7MP (1000PSI)
C-STATIC 7MP (1000PSI)
Machine Make Machine Model
M NL12
M Mori Seiki NL12 NL 12 Stations
NZ20 NZ 16&20 Stations
Style
OFF Offset
AD Adjustable
MS 2 Spindles, Main & Sub
MD Main Spindle, 2 Output
MSD Main & Sub Spindle, 4 Output
MT Main Spindle, 3 Output
Static Static Holder
MS
- - - -
Special Live Tool Inquiry Form Inside cover
Table of Contents 1
General Matrix 2-3
Introduction 4
Features and Technology 5
Live Tools for Mori Seiki 12-Station, NLX, NTX4000 & NTX5000 Series 6-28
Static Tools for Mori Seiki 12-Station, NLX, NTX4000 & NTX5000 Series 29-47
Live Tools for Mori Seiki 20-Station, NLX, DuraTurn, NZX & NTX3000 Series 48-58
Static Tools for Mori Seiki 20-Station, NLX, DuraTurn, NZX & NTX3000 Series 59-69
How to Choose Cutting Heads for Capto Static Tools 70
Mimatic® MI Attachments 71-73
Capto Holders 74-76
ER Series Collets and Tap Collets 77-80
Replacement Parts and Milling Chuck Collets 81
Torque Wrench, Warranty / Service and Accessories 82-84
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series
12
12 Station Turret
OD Drill/Mill Unit with ER Output
6 MNL12-ER32X ER32 6000 6 MNL12-ER32X-C-2MP ER32 IC 3000 7 MNL12-ER32X-C-7MP ER32 IC 6000 7 MNL12-ER32X-C-7MP-MI ER32 IC 6500 8 MNL12-ER40X ER40 6000 8 MNL12-ER40X-C-7MP ER40 IC 6000 9 MNL12-ER40X-C-7MP-MI ER40 IC 6500 9 MNL12-ER40X-62 ER40 6000 Offset Type OD Drill/Mill Unit with ER Output
10 MNL12-ER20X-OFF ER20 6000 10 MNL12-ER32X-OFF ER32 6000 11 MNL12-ER16Y-OFF-MD ER16 6000OD Drill/Mill Unit with 2 x ER Output
11 MNL12-ER25X-MSD ER25 6000 12 MNL12-ER25Y-MD ER25 6000Adjustable Angle Drill/Mill Unit
12 MNL12-ER20-AD ER20 4000OD Milling Chuck Holder
13 MNL12-TRX75X 3/4” 3000OD Shell Mill Unit with Mill Arbor
13 MNL12-SM22MMX 22mm 3000 14 MNL12-SM10X 1” 3000 14 MNL12-SM75X 3/4” 6000OD Weldon Drill/Mill Unit
15 MNL12-EMH20MMX 20mm 3000 15 MNL12-EMH25MMX 25mm 3000 16 MNL12-EMH10X 1” 3000OD Capto Drill/Mill Unit
16 MNL12-CAPTO4X-HS C4 6000 Mimatic Quick Change System OD Drill/Mill Unit
17 MNL12-MI50X-C-7MP-MI MI50 IC 6500Face Drill/Mill Unit with ER Output
17 MNL12-ER32Z ER32 6000 18 MNL12-ER32Z-C-7MP ER32 IC 6000 18 MNL12-ER32Z-C-7MP-MI ER32 IC 6500 19 MNL12-ER40Z ER40 6000 19 MNL12-ER40Z-C-7MP ER40 IC 6000 20 MNL12-ER40Z-C-7MP-MI ER40 IC 6500Face Drill/Mill Unit with 2 or 4 X ER Output
20 MNL12-ER32Z-MS ER32 6000 21 MNL12-ER40Z-MS ER40 6000 21 MNL12-ER16Z-MD ER16 6000 22 MNL12-ER25Z-MD ER25 6000 22 MNL12-ER25Z-MD-C-7MP ER25 IC 6000 23 MNL12-ER25Z-MSD ER25 6000Face Milling Chuck Holder
23 MMNL12-TRX75Z 3/4” 3000Face Shell Mill Unit with Mill Arbor
24 MNL12-SM10Z 1” 3000 24 MNL12-SM22MMZ 22mm 3000Face Weldon Drill/Milling Unit
25 MNL12-EMH10Z 1” 3000 25 MNL12-EMH20MMZ 20mm 3000 26 MNL12-EMH25MMZ 25mm 3000Face Capto Drill/Mill Unit
26 MNL12-CAPTO4Z C4 6000 27 MNL12-CAPTO4Z-C-2MP C4 IC 3000Mimatic Quick Change Face Drill/Mill Unit
27 MNL12-MI50Z-C-7MP-MI MI50 IC 6500Mimatic Quick Change Face Drill/Mill Unit with 2 X ER Output
28 MNL12-MI40Z-MS-C-MI MI50 IC 6500
LIVE TOOLS
Product Page Part Number OutputExt./Int. Coolant
Max. RPM
OD Turning Tool / Cutting Holder
29 MNL12-OD75X 3/4” 29 MNL12-OD20MX-HW 20mm 30 MNL12-OD10X 1” 30 MNL12-OD25MX-HW 25mm 31 MNL12-OD75X-MS 3/4” 2 output 31 MNL12-OD20MX-MS-HW 20mm 2 output 32 MNL12-OD10X-MS 1” 2 output 32 MNL12-OD25MX-MS-HW 25mm 2 output 33 MNL12-OD75X-MSD-HW 3/4” 4 output 33 MNL12-OD20MX-MSD-HW 20mm 4 output 34 MNL12-OD10X-MSD 1” 4 output 34 MNL12-OD25MX-MSD-HW 25mm 4 output 35 MNL12-OD75Y-MD 3/4” 2 outputOD Cut-Off Holder, Right hand
35 MNL12-CO10X 1” OD Cut-Off Holder
36 MNL12-CO12X 1.25”
ID Cutting Holder
36 MNL12-ID15Z 3/4” 37 MNL12-ID10Z 1”Boring Bar Holder
37 MNL12-BG15Z 1.5” 38 MNL12-BG20Z 2”Boring Bar Holder Multiple Output
38 MNL12-BG12Z-MSD 1.25” 4 output 39 MNL12-BG32MZ-MSD-HW 32mm 4 output 39 MNL12-BG10Z-MST 1” 6 output 40 MNL12-BG25MZ-MST-HW 25mm 6 output 40 MNL12-BG12Z-MST-HW 1.25” 6 output 41 MNL12-BG32MZ-MST-HW 32mm 6 output 41 MNL12-BG10Z-MSQ-HW 1” 8 output 42 MNL12-BG25MZ-MSQ-HW 25mm 8 output 42 MNL12-BG12Z-MS 1.25” 2 outputCombination Holder
43 MNL12-CH15Z 1.5” Boring Bar Holder with Slot
43 MNL12-BGS20Z 2” 44 MNL12-BGS15Z 1.5” ER Collet Chuck Static Holder
44 MNL12-ER40Z-STATIC ER40 45 MNL12-ER40Z-MS-STAT ER40 2 outputID Capto Turning Tool
45 MNL12-CAPTO5Z-C-STAT C5 IC 46 MNL12-CAPTO5Z-MS-CST C5 IC 2 outputOD Capto Turning Tool
46 MNL12-CAPTO5X-C-STAT C5 IC 47 MNL12-CAPTO5X-MS-CST C5 IC 2 output
STATIC TOOLS
2
Product Page Part Number OutputExt./Int. Coolant
Type
Mori Seiki 20-Station, NLX, DuraTurn, NZX and NTX3000 Series
20
20 Station Turret
OD Drill/Mill Unit with ER Output
48 MNZ20-ER16X-HS ER16 10000
48 MNZ20-ER20X ER20 6000
49 MNZ20-ER20X-C-7MP ER20 IC 6000
49 MNZ20-ER20X-OFF ER20 6000
50 MNZ20-ER25X ER25 6000
50 MNZ20-ER25X-C-7MP-MI ER25 IC 6500
51 MNZ20-ER32X ER32 6000
OD Shell Mill Unit with Mill Arbor
51 MNZ20-SM22MMX 22mm 2000
OD Capto Drill/Mill Unit
52 MNZ20-CAPTO3X-HS C3 6000
Mimatic Quick Change System OD Drill/Mill Unit
52 MNZ20-MI40X-C-7MP-MI MI40 IC 6500
Face Drill/Mill Unit with ER Output
53 MNZ20-ER16Z-HS ER16 10000
53 MNZ20-ER20Z ER20 6000
54 MNZ20-ER20Z-C-7MP ER20 IC 6000
54 MNZ20-ER25Z ER25 6000
55 MNZ20-ER25Z-C-7MP-MI ER25 IC 6500
55 MNZ20-ER32Z ER32 6000
Face Drill/Mill Unit with 2 X ER Output
56 MNZ20-ER20Z-MS ER20 6000
56 MNZ20-ER25Z-MS ER25 6000
Adjustable Angle Drill/Mill Unit with ER Output
57 MNZ20-ER16-AD ER16 4000
Face Capto Drill/Mill Unit
57 MNZ20-CAPTO3Z-HS C3 6000
Mimatic Quick Change System OD Drill/Mill Unit
58 MNZ20-MI40Z-C-7MP-MI MI40 IC 6500
Face Shell Mill Unit with Mill Arbor
58 MNZ20-SM22MMZ 22mm 2000
LIVE TOOLS
OD Turning Tool
59 MNZ20-OD75X 3/4” short 59 MNZ20-OD75X-LG 3/4” longOD Cutting Holder, 2 Output
60 MNZ20-OD75X-MD 3/4” 60 MNZ20-OD75X-MS 3/4” short 61 MNZ20-OD75X-LG-MS 3/4” longOD Cutting Holder, 4 Output
61 MNZ20-OD75X-MSD 3/4” Cut-Off Holder, Right Hand
62 MNZ20-CO75X 3/4” ID Turning Holder
62 MNZ20-ID75Z 3/4” Boring Bar Holder
63 MNZ20-BG12Z 1.25” Boring Bar Holder, 2 Output
63 MNZ20-BG10Z-MS 1” Combination Holder
64 MNZ20-CH12Z-C 1.25” Boring Bar Holder, 4 Output
64 MNZ20-BG75Z-MSD 3/4” 65 MNZ20-BG10Z-MSD-C 1” ICBoring Bar Holder, 6 Output
65 MNZ20-BG10Z-MST-C 1” ICER Collet Chuck Static Holder 66 MNZ20-ER32Z-MS-STAT ER32 2 outputOD Capto Turning Tool
66 MNZ20-CAPTO4X-C-STAT C4 IC 67 MNZ20-CAPTO4X-MS-CST C4 IC 2 outputID Capto Turning Tool
67 MNZ20-CAPTO4Z-C-STAT C4 IC 68 MNZ20-CAPTO4Z-MS-CST C4 IC 2 output
STATIC TOOLS
3
Product Page Part Number OutputExt./Int. Coolant
Max. RPM
Product Page Part Number OutputExt./Int. Coolant
Type
4
Static and Live Tooling for Mori Seiki Machines
Mori Seiki has selected Alps/Lyndex-Nikken live tools for
inclusion in their MSQP (Mori Seiki Qualified Peripherals)
program to ensure that peripheral equipment used on
their lathes and machining centers is consistent both in
terms of quality and performance.
Alps live tooling for Lyndex-Nikken offers the latest
technology you can expect for turning operations.
Designed and manufactured directly with Mori Seiki
engineers in Japan, our live tools have features and
benefits unmatched by the competition. Gears, bearings,
seals, every part is built to provide the highest accuracy,
rigidity and stability.
With more than 30 years of tooling engineering and
manufacturing experience, Lyndex-Nikken live tooling
will maximize the capabilities of your machine, and keep
you far ahead of the global competition. We understand
that exceptional quality is key to your business. Let the
manufacturers who share your philosophy in producing
live tools join you in doing what you do best - machining
the highest quality parts.
Enhanced with Alps/Lyndex-Nikken live tooling, your Mori
Seiki machine will allow you to reduce cycle times, eliminate
extra operations and achieve maximum efficiency.
Lyndex-Nikken is an official Mori Seiki Qualified Peripherals (MSQP) supplier.
Maximize the capabilities of your Mori Seiki Machine
Lyndex-Nikken live tools are manufactured by Alps Tool Co. Ltd.
Parts inventory, maintenance and repair, and rebuild services are available through Lyndex-Nikken.
5
Static and Live Tooling for Mori Seiki Machines
FEATURES AND TECHNOLOGY
Protective Seals• Labyrinth Seals
Gears for Stability• Gear Pairing - hand-matched for
each pair to minimize backlash.
• Gear Design - custom ground spiral bevel gear tooth design maximizes drive torque output and reduces tooth root stress allowing for more tool longevity.
• Gear Equilibrium - placement of bearings balance torque stress evenly through input/output shafts.
Eccentric Bearing Nut• Ground Eccentric Nut - allows for
fine accuracy and strong tool shank gripping capacity by preventing collet twisting or rocking.
• Runout - guarantee of under 5-micron repeatability at collet nose.
Tool Design and Engineering• Tool Body - manufactured from the highest tensile and
compression Nickel Chrome Molybdenum alloys.
• Drive Shafts - all features are ground on both the input and output Chrome Molybdenum drive shafts to assure proper torque transmission and precision concentricity.
• Quality Control - all live tools go through a vigorous 60-point final inspection to satisfy the highest expectations of live tool performance.
Bearing QualityOnly the highest precision ABEC 7 angular contact bearings are used for smooth and high speed rotation.
As an authorized OEM supplier to Mori Seiki, Lyndex-Nikken live tools are designed and manufactured in conjunction with Mori Seiki engineers at the factory in Japan.
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Live Tools12
Sta
tio
n -
Live
To
ol Clockwise Input
Clockwise Output
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
OutputCollet Size
Replacement
NutCoolant Nozzle
External Radial 6000 1:1 29.5ft-lbs (40N-m)ER32
(1/8” to 25/32”)NA32 HI10337110 FK-10 FK-8
2.55
965
2.12654
2.12654
652.
559
1.929
2.36
2
49
0.31
1
2.00
851
2.087
60
7.90
0
37.941.494
53 542.126
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
Part #: MNL12-ER32X Mori Seiki Part #: T32206
Clockwise Input
Clockwise Output
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
Output
Max. Pressure
(PSI)Collet Size
Replacement
NutCoolant Nozzle
Internal Radial 3000 1:1 29.5ft-lbs (40N-m) 200ER32
(1/8” to 25/32”)NA32 MT100-31090 FK-10 FK-8
1.73244
1.494
512.
008
60
37.942.480
63
2.36
2
2.08753
7.90
0.31
1
2.55
965
2.12654
2.12654
652.
559
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
Part #: MNL12-ER32X-C-2MP Mori Seiki Part #: T32232
ER32 OD Drill/Milling Unit
12
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
Note: Max Coolant Pressure 290 PSI - Must use a minimum of a 5 micron coolant filter to prevent damage to the unit.
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
ER32 OD Drill/Milling Unit
6
12 S
tati
on
- Li
ve T
oo
l
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Live Tools
Clockwise Input
Clockwise Output
652.
559
2.1265454
2.126
652.
559
441.732
7.90
0.31
1
46.942.205
60
542.126
56
2.36
2
1.848
512.
008
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
Output
Max. Pressure
(PSI)Collet Size
Replacement
NutCoolant Nozzle
Internal Radial 6000 1:1 29.5ft-lbs (40N-m) 1000ER32
(1/8” to 25/32”)NA32 HI10337110 FK-10 FK-8
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
ER32 OD Drill/Milling UnitPart #: MNL12-ER32X-C-7MP Mori Seiki Part #: T32478
12
Note: Max Coolant Pressure 1015 PSI - Must use a minimum of a 5 micron coolant filter to prevent damage to the unit.
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
Note: Max Coolant Pressure 1015 PSI - Must use a minimum of a 5 micron coolant filter to prevent damage to the unit.
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
Clockwise Input
Clockwise Output
652.559
652.559
542.
126
542.
126
53 63.502.500
0.31
17.
90
79.503.130
2.087
59.9
02.
358
381.496
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
Output
Max. Pressure
(PSI)Collet Size Replacement Nut
Internal Radial 6500 1:1 (70N-m) 1000ER32
(1/8” to 25/32”)NUT-ER32I
WRENCH-MIM-107642
WRENCH-ER32I
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
ER32 OD Drill/Milling UnitPart #: MNL12-ER32X-C-7MP-MI
7
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Live Tools12
Sta
tio
n -
Live
To
ol
Clockwise Input
Clockwise Output
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
Output
Max. Pressure
(PSI)Collet Size
Replacement
NutCoolant Nozzle
Internal Radial 6000 1:1 29.5ft-lbs (40N-m) 1000ER40
(5/32” to 1”)NA40 HI10337110 FK-10 FK-9
1.7324446.94
1.848
2.36
2
63
361.417
54
600.
311
2.126
2.48
0
7.90
1124.409
2.12654
2.12654
652.
559
652.
559
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
Part #: MNL12-ER40X-C-7MP Mori Seiki Part #: T32234
ER40 OD Drill/Milling Unit
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
Note: Max Coolant Pressure 1015 PSI - Must use a minimum of a 5 micron coolant filter to prevent damage to the unit.
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
8
Clockwise Input
Clockwise Output
2.36
260
37.941.494
532.087
2.48
063
1.75244.50
2.38260.50
7.90
0.31
1
542.126
542.126
652.
559
652.
559
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
OutputCollet Size
Replacement
NutCoolant Nozzle
External Radial 6000 1:1 29.5ft-lbs (40N-m)ER40
(5/32” to 1”)NA40 HI10337110 FK-10 FK-9
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
ER40OD Drill/Milling UnitPart #: MNL12-ER40X Mori Seiki Part #: T32213
12
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Live Tools
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
OutputCollet Size
Replacement
NutCoolant Nozzle
External Radial 6000 1:1 29.5ft-lbs (40N-m)ER40
(5/32” to 1”)NUT-ER40I HI10337110 FK-10
WRENCH- ER40I
381.496
35.3
71.
393
ER40Collet 65
2.55
9
2.36260
2.12654
652.
559
532.087
2.44162
2.36
260
0.31
17.
90
230.905
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
Part #: MNL12-ER40X-62
Clockwise Input
Clockwise Output
ER40OD Drill/Milling Unit
Note: Max Coolant Pressure 1015 PSI - Must use a minimum of a 5 micron coolant filter to prevent damage to the unit.
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
12 S
tati
on
- Li
ve T
oo
lClockwise Input
Clockwise Output
652.559
2.12
654
542.
126
652.559
63.502.500
4.528115
381.496
2.35
859
.90
2.08753
7.90
0.31
1
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
Output Max. Pressure (PSI) Collet Size
Replacement
Nut
Internal Radial 6500 1:1 (70N-m) 1000ER40
(5/32” to 1”)NUT-MIM-ER40
WRENCH-MIM-107566
WRENCH-MIM-112867
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
ER40OD Drill/Milling UnitPart #: MNL12-ER40X-C-7MP-MI
12
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Live Tools12
Sta
tio
n -
Live
To
ol
10
Clockwise Input
Clockwise Output
External or
Internal Coolant
Radial/
AxialMax. RPM Gear Ratio
Max. Torque
OutputCollet Size Replacement Nut Coolant Nozzle
External Radial 6000 1:1 29.5ft-lbs (40N-m)ER20
(1/16” to 1/2”)NA20 MT100-31090 SP-41 FK-5
53 37
361.
417
2.087
602.
362
1.457
2.91374
37.941.494
7.90
0.31
1
2.12654
4.52
811
5
2.12654
501.
968
311.
220
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
Part #: MNL12-ER20X-OFF Mori Seiki Part #: T32225
ER20 Offset OD Drill/Milling Unit
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
Clockwise Input
Clockwise Output
External or Internal
Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
OutputCollet Size
Replacement
NutCoolant Nozzle
External Radial 6000 1:1 22ft-lbs (30N-m)ER32
(1/8” to 25/32”)NA32 MT100-31090 FK-9 FK-8
391.
535
37.941.494
2.12654
4.52
811
52.126
54
501.
969
7.90
0.31
1
2.717
532.087
2.36
260
512.
008
69
451.772
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
Part #: MNL12-ER32X-OFF
ER32 Offset OD Drill/Milling Unit
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
12
Clockwise Input
Clockwise Output
602.
362
2.44162
1.26
032
1.77245
2.08753
1.49437.94
7.90
0.31
1
190.748
1.22031
1.2203170
2.756
0.472
6.10
215
51.
378
35
12
903.
543
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
OutputCollet Size Replacement Nut Coolant Nozzle
External Radial 6000 1:1 29.5ft-lbs (40N-m)ER16
(1/64” to 13/32”)NA16 HI10337110 SP-41 FK-4
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
Part #: MNL12-ER16Y-OFF-MD Mori Seiki Part #: T32267
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
12 S
tati
on
- Li
ve T
oo
l
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Live Tools
12
37.941.494
602.
362
7.90
0.7872053
2.087
0.31
1
2.59866
702.
756
682.
677
2.75670
5.35
413
6
5.354136
331.299
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
OutputCollet Size Replacement Nut Coolant Nozzle
External Radial 6000 1:1 7.37ft-lbs (10N-m)ER25
(1/16” to 5/8”)NUT-ER25I
PAP-CU- 6X4X100-SET
SP-41 WRENCH- ER25I
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
Part #: MNL12-ER25X-MSD
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
Clockwise Input
Clockwise Output
ER25 OD Drill/Milling Unit, 2 Output X-Axis (Main & Sub)
ER16 Offset OD Drill/Milling Unit 2 Output Y-Axis (Main)
11
12
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Live Tools12
Sta
tio
n -
Live
To
ol Clockwise Input
Clockwise Output
863.386
2.36
260
532.0871.496
38
7.90
0.31
1
542.126 54
2.126
2.75
670
1.29
933
331.
299
4.252108
702.756
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
OutputCollet Size Replacement Nut Coolant Nozzle
External Radial 6000 1:1 11ft-lbs (15N-m)ER25
(1/16” to 5/8”)NUT-ER25I
PAP-CU- 6X4X100-SET
SP-41 WRENCH- ER25I
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
Part #: MNL12-ER25Y-MD
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
Clockwise Input
Clockwise Output
401.575
37.941.494
43.5
9
90°
57.2
9
1.71
6
90°
2.25
6
2.835
0.551
2.36
2
2.08753
72
14
60
7.90
0.31
1
2.12654
2.52064
2.55
965
652.
559
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
Output
Center Height
(mm)Collet Size
Replacement
NutCoolant Nozzle
External X-Z 4000 1:1 29.5ft-lbs (40N-m) 72ER20
(1/16” to 1/2”)NUT-ER20I
PAP-CU- 6X4X160-SET
FK-7 WRENCH- ER20I
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
Part #: MNL12-ER20-AD Mori Seiki Part #: T32474
ER20 Adjustable Angle Drill/Milling Unit
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
ER25 OD Drill/Milling Unit 2 Output Y-Axis (Main)
12
Clockwise Input
Clockwise Output
External or
Internal Coolant
Radial/
AxialMax. RPM Gear Ratio
Max. Torque
OutputCollet Size Coolant Nozzle
External Radial 3000 1:1 29.5ft-lbs (40N-m)Milling Chuck
3/4” HI10337110 FK-10 FK-8
60
1.732
53
44
52
2.36
2
6637.941.494
2.04
7
1.92949
2.5982.087
7.90
0.31
1
542.126
2.55
965
542.126
652.
559
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
Part #: MNL12-TRX75X Mori Seiki Part #: T32219
3/4” Milling ChuckHolder, Straight
Please refer to page 81 for Milling Chuck KM Collet details.
13
12 S
tati
on
- Li
ve T
oo
l
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Live Tools
12
Clockwise Input
Clockwise Output
0.31
1
1.92949
2.85472.50
2.08753
7.90
1.49437.94
2.36
260
220.
866
652.
559
2.12654
2.12654
652.
559
External or
Internal Coolant
Radial/
AxialMax. RPM Gear Ratio
Max. Torque
OutputArbor Size Coolant Nozzle Spanner Wrench for Spindle
External Radial 3000 1:1 29.5ft-lbs (40N-m) 22mm HI10337110 FK-10
Unit: mm [inch]
Part #: MNL12-SM22MMX Mori Seiki Part #: T32268
OD Shell Mill Unit with 22mm Mill Arbor
Replacement Arbor Screws for Shell Mill Holders available. See details on page 81.
14
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Live Tools12
Sta
tio
n -
Live
To
ol Clockwise Input
Clockwise Output
External or
Internal Coolant
Radial/
AxialMax. RPM Gear Ratio
Max. Torque
OutputArbor Size Coolant Nozzle Spanner Wrench for Spindle
External Radial 3000 1:1 29.5ft-lbs (40N-m) 1” HI10337110 FK-10
692.716
1.929
53
49
1.00
0
2.087
25.4
0
1.49437.94
602.
362
7.90
0.31
1
542.126 2.126
54
652.
559
652.
559
Unit: mm [inch]
Part #: MNL12-SM10X Mori Seiki Part #: T32217
OD Shell Mill Unit with 1” Mill Arbor
Replacement Arbor Screws for Shell Mill Holders available. See details on page 81.
37.941.494 2.087
7.90
0.31
1
2.36
260
5353
0.75
0
2.086
19.0
5
441.732
542.126
652.
559
542.126
652.
559
Unit: mm [inch]
Part #: MNL12-SM75X
OD Shell Mill Unit with 3/4” Mill Arbor
Replacement Arbor Screws for Shell Mill Holders available. See details on page 81.
External or
Internal Coolant
Radial/
AxialMax. RPM Gear Ratio
Max. Torque
OutputArbor Size Coolant Nozzle Spanner Wrench for Spindle
External Radial 6000 1:1 29.5ft-lbs (40N-m) 3/4” HI10337110 FK-10
Clockwise Input
Clockwise Output
12
Clockwise Input
Clockwise Output
Clockwise Input
Clockwise Output
External or
Internal Coolant
Radial/
AxialMax. RPM Gear Ratio
Max. Torque
Output
Center Height
(mm)Inner Dia. Coolant Nozzle
External Radial 3000 1:1 29.5ft-lbs (40N-m) 90 20mm HI10337110
2.0871.49437.94
0.3549
0.31
17.
90
53
1.73
244
1.92949
1.81146
2.36
260
120.472
2.55
965
2.12654 54
2.126
2.55
965
200.787
108.504.272
0.394
491.929
401.575
2.04
752
2.36
2
5337.94
60
1.494
7.90
0.31
1
2.087
10210.827
542.126
2.55
965
652.
559
2.12654
250.984
External or
Internal Coolant
Radial/
AxialMax. RPM Gear Ratio
Max. Torque
Output
Center Height
(mm)Inner Dia. Coolant Nozzle
External Radial 3000 1:1 29.5ft-lbs (40N-m) 90 25mm HI10337110
Unit: mm [inch]
Unit: mm [inch]
Part #: MNL12-EMH20MMX Mori Seiki Part #: T32227
Part #: MNL12-EMH25MMX Mori Seiki Part #: T32221
20mm Weldon OD Drill/Milling Unit
25mm WeldonOD Drill/Milling Unit
Replacement Set Screws for End Mill Holders available. See details on page 81.
Replacement Set Screws for End Mill Holders available. See details on page 81.
15
12 S
tati
on
- Li
ve T
oo
l
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Live Tools
12
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Live Tools12
Sta
tio
n -
Live
To
ol Clockwise Input
Clockwise Output
External or
Internal Coolant
Radial/
AxialMax. RPM Gear Ratio
Max. Torque
Output
Center Height
(mm)Inner Dia. Coolant Nozzle
External Radial 3000 1:1 29.5ft-lbs (40N-m) 90 1” HI10337110
491.9292.087
53
2.04
752
1.49437.94
2.36
260
40
0.394
1.575
7.90
0.31
1
108.504.272
10210.827
652.
559
2.12654
2.12654
2.55
965
25.401.000
Unit: mm [inch]
Part #: MNL12-EMH10X Mori Seiki Part #: T32223
1” Weldon OD Drill/Milling Unit
Replacement Set Screws for End Mill Holders available. See details on page 81.
Clockwise Input
Clockwise Output
External or
Internal Coolant
Radial/
AxialMax. RPM Gear Ratio
Max. Torque
OutputCapto Size Coolant Nozzle Torque Wrench
External Radial 6000 1:1 29.5ft-lbs (40N-m) C4 HI10337110 TQW-150 + TQW-CAPTO4(10)
602.
36
59.502.34
431.69
1.495337.94
2.09
7.90
0.31
2.56 65
2.1354 54
2.13
652.56
Part #: MNL12-CAPTO4X Mori Seiki Part #: T32238
Capto C4OD Drill/Milling Unit
“Cam-Lock, Quick-Change” type tool. Please refer to pages 74 - 76 for Capto Holders and to page 82 for Torque Wrench details.
12
Counter Clockwise Input
Clockwise Output
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
Output
Center Height
(mm)Collet Size
Replacement
NutCoolant Nozzle
External Axial 6000 1:1 29.5ft-lbs (40N-m) 90ER32
(1/8” to 25/32”)NA32 HI10337110 FK-10 FK-8
532.087
2.36
260
71.5
02.
815
37.941.494
451.771
903.543
4.05
510
3
7.90
0.31
1
512.008
542.126
542.126
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
Part #: MNL12-ER32Z Mori Seiki Part #: T32207
ER32 Face Drill/Milling Unit
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
Note: Max Coolant Pressure 1015 PSI - Must use a minimum of a 5 micron coolant filter to prevent damage to the unit.
Please refer to pages 71 - 73 for Mimatic MI attachments.
17
12 S
tati
on
- Li
ve T
oo
l
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Live Tools
Clockwise Input
Clockwise Output
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
Output
Max. Pressure
(PSI)
MI Attachment
SizeReplacement Nut
Internal Radial 6500 1:1 (70N-m) 1000 MI50 n/a n/aWRENCH-
MIM-170419
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
Mimatic MI50 Quick Change SystemOD Drill/Milling UnitPart #: MNL12-MI50X-C-7MP-MI
12
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Live Tools12
Sta
tio
n -
Live
To
ol
18
Counter Clockwise Input
Clockwise Output
107
4.21
310
34.
055
37.941.494
451.770
532.087
903.543
2.36
260 7.90
0.31
1
2.00851
2.12654 54
2.126
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
Output
Max. Pressure
(PSI)
Center
Height (mm)Collet Size
Replacement
NutCoolant Nozzle
Internal Axial 6000 1:1 29.5ft-lbs (40N-m) 1000 90ER32
(1/8” to 25/32”)NA32 HI10337110 FK-10 FK-8
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
ER32 Face Drill/Milling UnitPart #: MNL12-ER32Z-C-7MP Mori Seiki Part #: T32233
Note: Max Coolant Pressure 1015 PSI - Must use a minimum of a 5 micron coolant filter to prevent damage to the unit.
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
Note: Max Coolant Pressure 1015 PSI - Must use a minimum of a 5 micron coolant filter to prevent damage to the unit.
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
12
Clockwise Input
Counter Clockwise Output
2.97
275
.50
3.54390
692.
717
491.929
2.1265454
2.126
2.35
859
.90
2.0875338
1.496
7.90
0.31
1
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
Output
Max. Pressure
(PSI)Collet Size Replacement Nut
Internal Axial 6500 1:1 (70N-m) 1000ER32
(1/8” to 25/32”)NUT-ER32I
WRENCH-MIM-107642
WRENCH-ER32I
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
ER32 Face Drill/Milling UnitPart #: MNL12-ER32Z-C-7MP-MI
12 S
tati
on
- Li
ve T
oo
l
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Live Tools
Counter Clockwise Input
Clockwise Output
71.5
04.
134
903.543
105
60
451.770
37.94 53
2.81
5
2.087
2.36
2
1.494
7.90
0.31
1
542.126
632.480
542.126
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
Output
Center Height
(mm)Collet Size
Replacement
NutCoolant Nozzle
External Axial 6000 1:1 29.5ft-lbs (40N-m) 90ER40
(5/32” to 1”)NA40 HI10337110 FK-10 FK-9
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
ER40 FaceDrill/Milling UnitPart #: MNL12-ER40Z Mori Seiki Part #: T32214
Counter Clockwise Input
Clockwise Output
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
Output
Max. Pressure
(PSI)
Center
Height (mm)Collet Size
Replacement
NutCoolant Nozzle
Internal Axial 6000 1:1 29.5ft-lbs (40N-m) 1000 90ER40
(5/32” to 1”)NA40 HI10337110 FK-10 FK-9
107
4.21
310
54.
134
1.49437.94
3.54390
2.08753
602.
362
0.31
17.
90
451.772
2.12654
632.480
542.126
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
Part #: MNL12-ER40Z-C-7MP Mori Seiki Part #: T32235
ER40 FaceDrill/Milling Unit
Note: Max Coolant Pressure 1015 PSI - Must use a minimum of a 5 micron coolant filter to prevent damage to the unit.
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
19
12
20
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Live Tools12
Sta
tio
n -
Live
To
ol
Counter Clockwise Input
Clockwise Output
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
Output
Center Height
(mm)Collet Size
Replacement
NutCoolant Nozzle
External Z-Z 6000 1:1 29.5ft-lbs (40N-m) 90ER32
(1/8” to 25/32”)NA32 HI10337110 FK-10 FK-8
103
4.05
5
532.0871.494
37.94
602.
362
451.7703.543
90
7.90
0.31
1
512.008
542.126
4.05
510
3
542.126
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
Part #: MNL12-ER32Z-MS Mori Seiki Part #: T32216
ER32 Face Drill/Milling Unit2 Output (Main & Sub)
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
2.1265454
2.126
903.543
491.929
2.97
275
.50
117
4.60
6
59.9
02.
358
381.496
532.087
7.90
0.31
1
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
Output Max. Pressure (PSI) Collet Size
Replacement
Nut
Internal Axial 6500 1:1 (70N-m) 1000ER40
(5/32” to 1”)NUT-MIM-ER40
WRENCH-MIM-107566
WRENCH-MIM-112867
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
ER40Face Drill/Milling UnitPart #: MNL12-ER40Z-C-7MP-MI
Clockwise Input
Counter Clockwise Output
12
Note: Max Coolant Pressure 1015 PSI - Must use a minimum of a 5 micron coolant filter to prevent damage to the unit.
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
12 S
tati
on
- Li
ve T
oo
l
21
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Live Tools
Counter Clockwise Input
Clockwise Output
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
Output
Center Height
(mm)Collet Size
Replacement
NutCoolant Nozzle
External Axial 6000 1:1 29.5ft-lbs (40N-m) 120ER16
(1/64” to 13/32”)NA16 MT100-30140 SP-41 FK-4
311.220
532.087 72.30
2.846
1.49437.94
2.36
260
0.31
17.
90
4.724120
1.22031
2.44
162
3.97
610
1
1204.724
22.5
0 2.44162
1.29933
2.75670
1.29933
0.88
6
1.26032
371.
457
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
Part #: MNL12-ER16Z-MD Mori Seiki Part #: T32264
ER16 Face Drill/Milling Unit2 Output (Main)
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
Counter Clockwise Input
Clockwise Output
45
2.36
2
903.543
60
1.494
1.771
0.31
17.
90
37.942.087
53
105
4.13
4
632.480
542.126 2.126
54
105
4.13
4
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
Output
Center Height
(mm)Collet Size
Replacement
NutCoolant Nozzle
External Z-Z 6000 1:1 29.5ft-lbs (40N-m) 90ER40
(5/32” to 1”)NA40 HI10337110 FK-10 FK-8
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
Part #: MNL12-ER40Z-MS Mori Seiki Part #: T32248
ER40 Face Drill/Milling Unit2 Output (Main & Sub)
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
12
12 S
tati
on
- Li
ve T
oo
lMori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Live Tools
Counter Clockwise Input
Clockwise Output
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
Output
Max. Pressure
(PSI)Collet Size
Replacement
NutCoolant Nozzle
Internal Axial 6000 1:1 11ft-lbs (15N-m) 1000ER25
(1/16” to 5/8”)NA25 MYA01-12000 SP-27 FK-6
702.756
321.
260
311.220
311.220
1104.331
311.220
742.
913
833.
268
532.087
2.36
260
0.31
17.
90
1.69343
37.941.494
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
Part #: MNL12-ER25Z-MD-C-7MP
ER25 Face Drill/Milling Unit 2 Output (Main)
Note: Max Coolant Pressure 1015 PSI - Must use a minimum of a 5 micron coolant filter to prevent damage to the unit.
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
Counter Clockwise Input
Clockwise Output
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
OutputCollet Size
Replacement
NutCoolant Nozzle
External Axial 6000 1:1 7.37ft-lbs (10N-m)ER25
(1/16” to 5/8”)NA25 MYA01-12000 SP-27 FK-6
1104.331
2.61
874
2.91
366
.50
311.220
311.220
311.220
702.756
1.496
602.
362
0.31
17.
90
38 532.087
431.693 30
1.18
1
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
Part #: MNL12-ER25Z-MD
ER25 Face Drill/Milling Unit 2 Output (Main)
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
12
22
12 S
tati
on
- Li
ve T
oo
l
23
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Live Tools
Counter Clockwise Input
Clockwise Output
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
OutputCollet Size Replacement Nut Coolant Nozzle
External Axial 6000 1:1 7.37ft-lbs (10N-m)ER25
(1/16” to 5/8”)NA25 MYA01-12000 SP-27 FK-6
702.756
311.220
311.220
321.
260
1104.331
311.220
923.
622
742.
913
7.90
0.31
1
2.36
260
532.0871.496
38
431.693
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
Part #: MNL12-ER25Z-MSD
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
ER25 Face Drill/Milling Unit4 Output (Main & Sub)
12
Counter Clockwise Input
Clockwise Output
1.49437.94
2.36
260
1.7724590
3.543
2.83
572
2.08753
4.52
711
5
7.90
0.31
1
2.12654
2.04752
542.126
External or
Internal Coolant
Radial/
AxialMax. RPM Gear Ratio
Max. Torque
Output
Center Height
(mm)Collet Size Coolant Nozzle
External Axial 3000 1:1 29.5ft-lbs (40N-m) 90Milling Chuck
3/4”HI10337110 FK-10 FK-8
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
3/4” Face Milling Chuck HolderPart #: MNL12-TRX75Z Mori Seiki Part #: T32220
Please refer to page 81 for Milling Chuck KM Collet details.
12 S
tati
on
- Li
ve T
oo
lMori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Live Tools
24
Counter Clockwise Input
Clockwise Output
External or
Internal Coolant
Radial/
AxialMax. RPM Gear Ratio
Max. Torque
Output
Center Height
(mm)Arbor Size Coolant Nozzle Spanner Wrench for Spindle
External Axial 3000 1:1 29.5ft-lbs (40N-m) 90 1” HI10337110 FK-10
3.54390
7.90
0.31
1
118
4.64
6
451.772
532.087
722.
835
602.
362
37.941.494
542.126
1.00025.40
542.126
Unit: mm [inch]
Part #: MNL12-SM10Z Mori Seiki Part #: T32226
Face Shell Milling Unit with 1” Mill Arbor
Replacement Arbor Screws for Shell Mill Holders available. See details on page 81.
12
Counter Clockwise Input
Clockwise Output
722.
835
37.941.494
121.
504.
783
1.77245
3.54390
2.08753
2.36
260 7.90
0.31
1
542.126
0.86622
542.126
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
Output
Center Height
(mm)Arbor Size Coolant Nozzle Spanner Wrench for Spindle
External Axial 3000 1:1 29.5ft-lbs (40N-m) 90 22mm HI10337110 FK-10
Unit: mm [inch]
Part #: MNL12-SM22MMZ Mori Seiki Part #: T32269
Face Shell Milling Unit with 22mm Mill Arbor
Replacement Arbor Screws for Shell Mill Holders available. See details on page 81.
12 S
tati
on
- Li
ve T
oo
l
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Live Tools
25
Counter Clockwise Input
Clockwise Output
4.27
210
8.50
37.941.494 2.087
722.
835
0.31
1
3.54390
1.7714553
7.9060
2.36
2
542.126
522.047
2.12654
25.41.000
0.39
410
210.
827
External or
Internal Coolant
Radial/
AxialMax. RPM Gear Ratio
Max. Torque
OutputInner Dia. Coolant Nozzle
External Axial 3000 1:1 29.5ft-lbs (40N-m) 1” HI10337110
Unit: mm [inch]
Part #: MNL12-EMH10Z Mori Seiki Part #: T32224
1” Weldon Face Drill/Milling Unit
Replacement Set Screws for End Mill Holders available. See details on page 81.
12
Counter Clockwise Input
Clockwise Output
532.087
2.83
572
953.
740
1.49437.94
451.772
903.543
2.36
260 7.90
0.31
1
0.35
4
1.73244
20
2.12654 54
2.126
0.787
9
120.
472
External or
Internal Coolant
Radial/
AxialMax. RPM Gear Ratio
Max. Torque
OutputInner Dia. Coolant Nozzle
External Axial 3000 1:1 29.5ft-lbs (40N-m) 20mm HI10337110
Unit: mm [inch]
Part #: MNL12-EMH20MMZ Mori Seiki Part #: T32228
20mm WeldonFace Drill/Milling Unit
Replacement Set Screws for End Mill Holders available. See details on page 81.
12 S
tati
on
- Li
ve T
oo
lMori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Live Tools
26
Counter Clockwise Input
Clockwise Output
903.543
542.126
542.126
441.732
441.732
2.44
162
37.941.494
532.087
75.5
02.
972
522.047
2.36
260 7.90
0.31
1
Unit: mm [inch]
Capto C4 Face Drill/Milling UnitPart #: MNL12-CAPTO4Z-HS Mori Seiki Part #: T32239
“Cam-Lock, Quick-Change” type tool. Please refer to pages 74 - 76 for Capto Holders and to page 82 for Torque Wrench details.
External or
Internal Coolant
Radial/
AxialMax. RPM Gear Ratio
Max. Torque
OutputCenter Height (mm) Capto Size Coolant Nozzle Torque Wrench
External Axial 6000 1:1 29.5ft-lbs (40N-m) 90 C4 HI10337110 TQW-150 + TQW-CAPTO4(10)
Counter Clockwise Input
Clockwise Output
External or
Internal Coolant
Radial/
AxialMax. RPM Gear Ratio
Max. Torque
OutputInner Dia. Coolant Nozzle
External Axial 3000 1:1 29.5ft-lbs (40N-m) 25mm HI10337110
532.087
3.54390 45
1.771
4.27
210
8.50
7.90
0.31
1
722.
835
37.941.494
602.
362
210.
827
2.04752
2.12654 54
2.126
0.39
410 25
0.984
Unit: mm [inch]
Part #: MNL12-EMH25MMZ Mori Seiki Part #: T32222
25mm WeldonFace Drill/Milling Unit
Replacement Set Screws for End Mill Holders available. See details on page 81.
12
12 S
tati
on
- Li
ve T
oo
l
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Live Tools
Counter Clockwise Input
Clockwise Output
522.047
903.543 44
1.73244
1.732
542.126
542.126
2.44
162
105
4.13
4
2.08753
1.49437.9
602.
362
7.90
0.31
1
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
Output
Max. Pressure
(PSI)
Center Height
(mm)Capto Size Coolant Nozzle Torque Wrench
Internal Axial 3000 1:1 29.5ft-lbs (40N-m) 1000 90 C4 HI10337110 TQW-150 + TQW-CAPTO4(10)
Unit: mm [inch]
Capto C4 Face Drill/Milling UnitPart #: MNL12-CAPTO4Z-C-2MP Mori Seiki Part #: 2T3200266
Note: Max. coolant pressure 290 PSI - Must use a minimum of a 5 micron coolant filter to prevent damage to the unit.
“Cam-Lock, Quick-Change” type tool. Please refer to pages 74 - 76 for Capto Holders and to page 82 for Torque Wrench details.
12
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
Output Max. Pressure (PSI)
MI Attachment
Size
Replacement
Nut
Internal Axial 6500 1:1 (70N-m) 1000 MI50 n/a n/aWRENCH-
MIM-170419
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
Mimatic MI50 Quick Change SystemFace Drill/Milling UnitPart #: MNL12-MI50Z-C-7MP-MI
Clockwise Input
Counter Clockwise Output
Note: Max Coolant Pressure 1015 PSI - Must use a minimum of a 5 micron coolant filter to prevent damage to the unit.
Please refer to pages 71 - 73 for Mimatic MI attachments.
27
12 S
tati
on
- Li
ve T
oo
lMori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Live Tools
28
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
Output
Max. Pressure
(PSI)
MI Attachment
SizeReplacement Nut
Internal Axial 6500 1:1 (70N-m) 1000 MI40 n/a n/aWRENCH-
MIM-170734
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
Part #: MNL12-MI40Z-MS-C-MI
Please refer to pages 71 - 73 for Mimatic MI attachments.
Counter
Clockwise Input
Clockwise Output
12Mimatic MI50 Quick Change SystemFace Drill/Milling Unit, 2 Output (Main & Sub)
12 S
tati
on
- St
atic
To
ol
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Static Tools
12
29
Description Output Size Shaft Diameter
3/4” OD Turning Tool 0.75” (19mm) 2.36” (60mm)
652.559
59.9
02.
358
0.66
9
1.92949
17481.
890
1.37
6
0.75019.05
0.75
019
.05
652.559
54
2.55965
2.12
6
34.9
5
542.
126
Unit: mm [inch]
3/4” OD Turning ToolPart #: MNL12-OD75X Mori Seiki Part #: T00203
Unit: mm [inch]
20mm OD Turning ToolPart #:MNL12-OD20MX-HW Mori Seiki Part #: T00187
Description Output Size Shaft Diameter
20mm OD Turning Tool 20mm 2.36” (60mm)
12 S
tati
on
- St
atic
To
ol
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Static Tools
12
Description Output Size Shaft Diameter
1” OD Turning Tool 1.00” (25.4mm) 2.36”(60mm)1.
126
28.6
0
54
1.00
025
.40
65.202.5672.559
65
2.12
6
25.401.000
2.35
859
.90
702.756
0.27
6
1.87847.70
7
632.
480
Unit: mm [inch]
1” OD Turning ToolPart #: MNL12-OD10X Mori Seiki Part #: T00202
Unit: mm [inch]
25mm OD Turning ToolPart #:MNL12-OD25MX-HW Mori Seiki Part #: T00186
Description Output Size Shaft Diameter
25mm OD Turning Tool 25mm 2.36” (60mm)
30
12 S
tati
on
- St
atic
To
ol
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Static Tools
12
542.
126
2.61666.45
19.0
50.
750
85.503.366
34.9
5
2.35
860
1.37
634
.95
1.37
6
0.75
0
150.5
0.750
19.0
5
19.05
0.75
0
0.75
0
45.95
19.0
5
0.750
5.925
19.05
1.809
19.0
5
108
4.25
2
Description Output Size Shaft Diameter
3/4” OD Turning Tool, 2 Output (Main & Sub) .75” (19mm) 2.36” (60mm)
Unit: mm [inch]
3/4” OD Turning Tool2 Output (Main & Sub)
20mm OD Turning Tool, 2 Output (Main & Sub)
Unit: mm [inch]
Part #: MNL12-OD75X-MS Mori Seiki Part #: T00201
Description Output Size Shaft Diameter
20mm OD Turning Tool, 2 Output (Main & Sub) 20mm 2.36” (60mm)
Unit: mm [inch]
Part #:MNL12-OD20MX-MS-HW Mori Seiki Part #: T00185
31
12 S
tati
on
- St
atic
To
ol
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Static Tools
90.53.563
39.81.567
65.12.563
542.
126
1.00
0
1.00
01.
000
1.000
25.4
155.7
25.4
1.00
0
25.4
108
25.4
6.130
4.25
2
25.425.41.000
2.36 60
1.12
628
.628
.61.
126
Unit: mm [inch]Unit: mm [inch]
Part #: MNL12-OD10X-MS Mori Seiki Part #: T00199
12
Unit: mm [inch]
Part #:MNL12-OD25MX-MS-HW Mori Seiki Part #: T00184
Description Output Size Shaft Diameter
25mm OD Turning Tool, 2 Output (Main & Sub) 25mm 2.36” (60mm)
1” OD Turning Tool2 Output (Main & Sub)
25mm OD Turning Tool, 2 Output (Main & Sub)
32
Description Output Size Shaft Diameter
1” OD Turning Tool, 2 Output (Main & Sub) 1.00” (25.4mm) 2.36” (60mm)
12 S
tati
on
- St
atic
To
ol
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Static Tools
Description Output Size Shaft Diameter
3/4” OD Turning Tool, 4 Output (Main & Sub) 3/4” 2.36” (60mm)
Unit: mm [inch]
Part #:MNL12-OD75X-MSD-HW
12
Unit: mm [inch]
Part #:MNL12-OD20MX-MSD-HW
Description Output Size Shaft Diameter
20mm OD Turning Tool, 4 Output (Main & Sub) 20mm 2.36” (60mm)
3/4” OD Turning Tool4 Output (Main & Sub)
20mm OD Turning Tool, 4 Output (Main & Sub)
33
12 S
tati
on
- St
atic
To
ol
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Static Tools
121” OD Cutting Holder 4 Output (Main & Sub)
Description Output Size Shaft Diameter
1” OD Cutting Holder, 4 Output (Main & Sub) 1.00” (25.4mm) 2.36” (60mm)
311.
220
250.984
2.12
654
160.
630
98.503.878
98.503.878
2.36
260
150.
591
59.9
02.
358
773.031
1.00
025
.40
25.4
01.
000
Unit: mm [inch]
Part #: MNL12-OD10X-MSD
Tool suitable for Mori Seiki 12-station NLX Series only.
Description Output Size Shaft Diameter
25mm OD Turning Tool, 4 Output (Main & Sub) 25mm 2.36” (60mm)
Unit: mm [inch]
Part #:MNL12-OD25MX-MSD-HW
25mm OD Turning Tool, 4 Output (Main & Sub)
34
12 S
tati
on
- St
atic
To
ol
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Static Tools
12
Description Output Size Shaft Diameter
3/4” OD Turning Tool, 2 Output Y-Axis (Main) 3/4” (19.05mm) 2.36” (60mm)
1003.937
652.559
15.0
80.
594
542.
126 65
2.55
9
0.66
917
622.441
1034.055
0.75019.05
80.953.187
65
602.
358
2.559
19.7
60.
778
0.75
019
.05
Unit: mm [inch]
Part #: MNL12-OD75Y-MD Mori Seiki Part #: T00210
Tool suitable for Mori Seiki 12-station NLX Series only.
Description Output Size Shaft Diameter
1” Cut-Off Holder, Right Hand 1.02” (25.9mm) 2.36” (60mm)
652.559
25.4
01.
000
2.55965
542.
126
1.41736
2.75
670
943.701
2.35
860
953.7401.000
25.9
0
25.40
1.32
31.
020
33.6
0
39.601.559
1” Cut-Off Holder, Right HandPart #: MNL12-CO10X Mori Seiki Part #: T00198
Unit: mm [inch]
3/4” OD Turning Tool2 Output Y-Axis (Main)
35
12 S
tati
on
- St
atic
To
ol
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Static Tools
12
36
Description Output Size Shaft Diameter
1.25” OD Cut-Off Holder 1.25” (31.75mm) 2.36” (60mm)
AD
JUST
ABL
E +
/- .7
mm
381.496
58.502.303
321.
260
59.9
02.
358
351.
378
2.63
867
100
3.93
7
76.50
108
4.25
2
3.012
75°
3.22882
2.12
654
652.559
1.25” OD Cut-Off HolderPart #: MNL12-CO12X
Unit: mm [inch]
Description Output Size Shaft Diameter
3/4” ID Cutting Holder 0.75” (19mm) 2.36” (60mm)
2.12
654
652.559
552.
1651.
772
45
0.98
425 3.150
80
50.197
50.952.006
34.9
5
19.05
1.37
6
0.750
602.
358
552.165
4.25
210
8
38.1
01.
500
Unit: mm [inch]
3/4” ID Cutting HolderPart #: MNL12-ID75Z Mori Seiki Part #: T03014
12 S
tati
on
- St
atic
To
ol
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Static Tools
12
Description Output Size Shaft Diameter
1” ID Cutting Holder 1.00” (25.4mm) 2.36” (60mm)
542.
126
652.559
108
4.25
2
50.8
02.
000
451.772
2.35
8
1.000
28.6
1.12
6
60
25.40
74.602.937
1.18
1
70
30
2.75
6
3.543
2.36
2
90
60
50.197
Unit: mm [inch]
1” ID Cutting HolderPart #: MNL12-ID10Z Mori Seiki Part #: T03013
Description Output Size Shaft Diameter
1.5” Boring Bar Holder 1.5” (38.1mm) 2.36” (60mm)
702.756
542.
126
542.
126
652.559
120
4.72
4
3.74095
2.75
670
321.260
0.39410
321.260
38.101.5
00
3.15080
40R
1.575
602.
358
1355.315
Unit: mm [inch]
1.5” Boring Bar HolderPart #: MNL12-BG15Z Mori Seiki Part #: T10101
Tool suitable for Mori Seiki 12-station NLX Series only.
12 S
tati
on
- St
atic
To
ol
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Static Tools
12
702.756
542.
126
542.
126
652.559
2.75
670
3.74095
0.39410
321.260
120
4.72
4321.260
3.15080
1.57540R
50.802.0
00
602.
358
1355.315
Description Output Size Shaft Diameter
2” Boring Bar Holder 2” (50.8mm) 2.36” (60mm)
Unit: mm [inch]
2” Boring Bar HolderPart #: MNL12-BG20Z Mori Seiki Part #: T10102
Tool suitable for Mori Seiki 12-station NLX Series only.
4.25
210
8
1385.433
692.717
542.
126
622.
441
451.7721.
250
31.7
5
3.15080
1244.882
6.063154
59.9
02.
358
90.354
90.354 1.181
30301.181
Unit: mm [inch]
Description Output Size Shaft Diameter
1.25” Boring Bar Holder, 4 Output (Main & Sub) 1.25” (31.75mm) 2.36” (60mm)
1.25” Boring Bar Holder4 Output (Main & Sub)Part #: MNL12-BG12Z-MSD
Tool suitable for Mori Seiki 12-station NLX Series only.
38
12 S
tati
on
- St
atic
To
ol
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Static Tools
12
1385.433
4.25
210
8
542.
126
692.717 25
.40
1.00
0
2.36260
2.44
1
1546.063
351.378
62
1244.882
1.37835
59.9
02.
358
90.354 0.354
91.181
30301.181
Description Output Size Shaft Diameter
1” Boring Bar Holder, 6 Output (Main & Sub) 1.00” (25.4mm) 2.36” (60mm)
Unit: mm [inch]
1” Boring Bar Holder 6 Output (Main & Sub)Part #: MNL12-BG10Z-MST
Tool suitable for Mori Seiki 12-station NLX Series only.
Unit: mm [inch]
Part #:MNL12-BG32MZ-MSD-HW
Description Output Size Shaft Diameter
32mm Boring Bar Holder, 4 Output (Main & Sub) 32mm 2.36” (60mm)
32mm Boring Bar Holder4 Output (Main & Sub)
39
12 S
tati
on
- St
atic
To
ol
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Static Tools
12
Description Output Size Shaft Diameter
25mm Boring Bar Holder, 6 Output (Main & Sub) 25mm 2.36” (60mm)
Unit: mm [inch]
25mm Boring Bar Holder6 Output (Main & Sub)Part #:MNL12-BG25MZ-MST-HW
Unit: mm [inch]
1.25” Boring Bar Holder6 Output (Main & Sub)Part #:MNL12-BG12Z-MST-HW
Description Output Size Shaft Diameter
1.25” Boring Bar Holder, 6 Output (Main & Sub) 1.25” 2.36” (60mm)
40
12 S
tati
on
- St
atic
To
ol
12
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Static Tools
Description Output Size Shaft Diameter
32mm Boring Bar Holder, 6 Output (Main & Sub) 32mm 2.36” (60mm)
Unit: mm [inch]
32mm Boring Bar Holder6 Output (Main & Sub)Part #:MNL12-BG32MZ-MST-HW
50.8
02.
000
25.401.000
79.6
03.
134
4.252108
4.13
410
5
50.802.000
150
5.90
6
25.4
01.
000 130
5.118
Unit: mm [inch]
1” Boring Bar Holder8 Output (Main & Sub)Part #:MNL12-BG10Z-MSQ-HW
Description Output Size Shaft Diameter
1” Boring Bar Holder, 8 Output (Main & Sub) 1” 2.36” (60mm)
41
12 S
tati
on
- St
atic
To
ol
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Static Tools
12
Description Output Size Shaft Diameter
25mm Boring Bar Holder, 8 Output (Main & Sub) 25mm 2.36” (60mm)
Unit: mm [inch]
25mm Boring Bar Holder8 Output (Main & Sub)Part #:MNL12-BG25MZ-MSQ-HW
542.
126
421.
654
572.244
80.315
542.
126
702.756
31
4.921125
2.35
860
1.250
31.75
1.250
31.75
R1.220
803.150
29.5
119
1.161
4.68
5
3.071
10
78
29.5
0.394
0.394
1.161
10
156
6.14
2
1.16129.529.5
1.161
1355.315
Description Output Size Shaft Diameter
1.25” Boring Bar Holder, 2 Output (Main & Sub) 1.25” (31.75mm) 2.36” (60mm)
Unit: mm [inch]
1.25” Boring Bar Holder2 Output (Main & Sub)Part #: MNL12-BG12Z-MS Mori Seiki Part #: T10100
Tool suitable for Mori Seiki 12-station NLX Series only.42
12 S
tati
on
- St
atic
To
ol
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Static Tools
12
Description Output Size Shaft Diameter
1.5” Combination Holder 1.5” (38.1mm) 2.36” (60mm)
652.559
542.
126
542.
126
903.543
702.756
5.315135
200.787
38.101.5
00
3.15080
2.35
860
R40
1.575
4.72
412
0
702.
756
953.740
42.501.673
Unit: mm [inch]
1.5” Combination HolderPart #: MNL12-CH15Z Mori Seiki Part #: T13130
Tool suitable for Mori Seiki 12-station NLX Series only.
R
542.
126
2.35
860
3.15080
1.00025.4
401.575
542.
126
2.55965
1405.512
Description Output Size Shaft Diameter
2” Boring Bar Holder with Slot 2” (50.8mm) 2.36” (60mm)
Unit: mm [inch]
2” Boring Bar Holder with SlotPart #: MNL12-BGS20Z Mori Seiki Part #: T10142
Tool suitable for Mori Seiki 12-station NLX Series only.
43
12 S
tati
on
- St
atic
To
ol
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Static Tools
12
Description Output Size Shaft Diameter
1.5” Boring Bar Holder with Slot 1.5” (38.1mm) 2.36” (60mm)
1405.512
652.559
542.
126
401.575
2.35
860
0.750
803.150
19.05R
542.
126
Unit: mm [inch]
1.5” Boring Bar Holder with SlotPart #: MNL12-BGS15Z Mori Seiki Part #: T10143
Tool suitable for Mori Seiki 12-station NLX Series only.
903.
543
92.503.642
451.772
5.23
613
3
2.48
063
301.
181
3.30784
59.902.358
1084.252
Description Output Size Shaft Diameter Replacement Nut Wrench
ER40 Collet Chuck Static Holder ER40 (5/32” to 1”) 2.36” (60mm) NA40 FK-9
Unit: mm [inch]
ER40 Collet Chuck Static HolderPart #: MNL12-ER40Z-STATIC
44
12 S
tati
on
- St
atic
To
ol
12
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Static Tools
92.503.642
92.503.642
903.
543
133
5.23
6
2.48
063
301.
181
4.252
59.902.358
108
843.307
Description Output Size Shaft Diameter Replacement Nut Wrench
ER40 Collet Chuck Static Holder, 2 Output (Main & Sub) ER40 (5/32” to 1”) 2.36” (60mm) NA40 FK-9
ER40 Collet Chuck Static Holder 2 Output (Main & Sub)Part #: MNL12-ER40Z-MS-STAT
Unit: mm [inch]
Description Output Size Shaft Diameter Maximum Internal Pressure
Capto C5 ID Holder C5 2.36” (60mm) 1000 PSI
542.13
3.56
90.5
0
542.13
41.501.63
122
4.80
4.193106.50
2.3660
1305.12
Capto C5 ID HolderPart #: MNL12-CAPTO5Z-C-STAT Mori Seiki Part #: T12068
“Note: Max. coolant pressure 1015 PSI - Must use a minimum of a 5 micron coolant filter to prevent damage to the unit. Cam-Lock, Quick-Change” type tool.
Internal sleeves can be rotated to accommodate for main/sub clockwise and counterclockwise spindle rotation for left or right hand turning tools. See page 70 for details.
Unit: mm [inch]
45
12 S
tati
on
- St
atic
To
ol
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Static Tools
12
451.77
41.501.63
41.501.63
542.13
542.13
2.36
30
60
1.18
23.500.93
130
67
5.12
2.64
23.500.93
120
4.72
752.95
152
5.98
1084.25
Description Output Size Shaft Diameter Maximum Internal Pressure
Capto C5 ID Holder, 2 Output (Main & Sub) C5 2.36” (60mm) 1000 PSI
Capto C5 ID Holder 2 Output (Main & Sub)Part #: MNL12-CAPTO5Z-MS-CST Mori Seiki Part #: T12069
Screw-in type tool. “Note: Max. coolant pressure 1015 PSI - Must use a minimum of a 5 micron coolant filter to prevent damage to the unit.
Internal sleeves can be rotated to accommodate for main/sub clockwise and counterclockwise spindle rotation for left or right hand turning tools. See page 70 for details.
Unit: mm [inch]
542.
126
331.299
652.559
5.118130
108
4.25
2
220.
866
953.740
642.
520
1.18130
602.
358
45°
70.52.775
Description Output Size Shaft Diameter Maximum Internal Pressure
Capto C5 OD Holder C5 2.36” (60mm) 1000 PSI
Unit: mm [inch]
Capto C5 OD Holder
“Note: Max. coolant pressure 1015 PSI - Must use a minimum of a 5 micron coolant filter to prevent damage to the unit.
“Cam-Lock, Quick-Change” type tool. This static tool can be ordered for left hand cutting; please refer the following part number: AC5-SSMS100-40000L.
Internal sleeves can be rotated to accommodate for main/sub clockwise and counterclockwise spindle rotation for left or right hand turning tools. See page 70 for details.
Part #: MNL12-CAPTO5X-C-STAT Mori Seiki Part #: T00208
12 S
tati
on
- St
atic
To
ol
47
12
Mori Seiki 12-Station, NLX, NTX4000 and NTX5000 Series - Static Tools
1.29933
652.559
652.559
1.33934
542.
126
311.220
2.12
654
321.260
2.52
064
0.86
622
602.
358
95.53.760
301.181
Description Output Size Shaft Diameter Maximum Internal Pressure
Capto C5 OD Holder, 2 Output (Main & Sub) C5 2.36” (60mm) 1000 PSI
Unit: mm [inch]
“Note: Max. coolant pressure 1015 PSI - Must use a minimum of a 5 micron coolant filter to prevent damage to the unit. “Cam-Lock, Quick-Change” type tool.
Internal sleeves can be rotated to accommodate for main/sub clockwise and counterclockwise spindle rotation for left or right hand turning tools. See page 70 for details.
Capto C5 OD Holder 2 Output (Main & Sub)Part #: MNL12-CAPTO5X-MS-CST Mori Seiki Part #: T00209
Mori Seiki 20-Station NLX, DuraTurn, NZX and NTX3000 Series - Live Tools20
Sta
tio
n -
Live
To
ol
1.53539
1.53539
552.
165
552.
165
321.
260
2.91374
1.53539
1.18130
0.88622.5
371.457
401.
575
7.9
0.31
1
Unit: mm [inch]
Clockwise Output
Clockwise Input
External or Internal
Coolant
Radial/
AxialMax. RPM Gear Ratio
Max. Torque
OutputCollet Size
Replacement
NutCoolant Nozzle
External Radial 10000 1:1 21ft-lbs (28.5N-m)ER16
(1/64” to 13/32”)NA16 TM100-31090 SP-41 FK-4
Spanner Wrench
for Spindle for Nut
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
Clockwise Input
Clockwise Output
External or Internal
Coolant
Radial/
AxialMax. RPM Gear Ratio
Max. Torque
OutputCollet Size
Replacement
NutCoolant Nozzle
External Radial 6000 1:1 21ft-lbs (28.5N-m)ER20
(1/16” to 1/2”)NA20 TM100-31090 SP-41 FK-5
2.16
555
391.535
391.535
552.
165
37
1.57
5
36
1.26032
1.457
1.41
7
1.142
1.457
29
40
37
7.90
0.31
1
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
ER16 OD Drill/Milling UnitPart #: MNZ20-ER16X-HS Mori Seiki Part #: T32433
ER20 OD Drill/Milling UnitPart #: MNZ20-ER20X Mori Seiki Part #: T32254
48
20
49
20 S
tati
on
- Li
ve T
oo
l
Mori Seiki 20-Station NLX, DuraTurn, NZX and NTX3000 Series - Live Tools
Note: Max Coolant Pressure 1015 PSI - Must use a minimum of a 5 micron coolant filter to prevent damage to the unit.
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
361.
417
371.457
291.142
1.57
540
2.28358
1.26032
7.90
0.31
1
953.740
1.53539
2.16
555
391.535
552.
165
Unit: mm [inch]
Clockwise Output
Clockwise Input
Clockwise Input
Clockwise Output
External or Internal
Coolant
Radial/
AxialMax. RPM Gear Ratio
Max. Torque
OutputCollet Size
Replacement
NutCoolant Nozzle
External Radial 6000 1:1 21ft.lbs (28.5N-m)ER20
(1/16” to 1/2”)NA20 TM100-31090 SP-41 FK-5
37
401.
575
461.811
1.41
7
1.457 1.26032
36
1.14229
7.90
0.31
1
98.503.878
391.535
391.535
301.
181
150
5.90
6
953.
740
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
ER20 OD Drill/Milling UnitPart #: MNZ20-ER20X-C-7MP Mori Seiki Part #: T32287
ER20 Offset OD Drill/Milling UnitPart #: MNZ20-ER20X-OFF Mori Seiki Part #: T32279
External or Internal
Coolant
Radial/
AxialMax. RPM Gear Ratio
Max. Torque
OutputCollet Size
Replacement
NutCoolant Nozzle
Internal Radial 6000 1:1 21ft.lbs (28.5N-m)ER20
(1/16” to 1/2”)NA20 TM100-31090 SP-32 FK-5
Spanner Wrench
for Spindle for Nut
20
Mori Seiki 20-Station NLX, DuraTurn, NZX and NTX3000 Series - Live Tools20
Sta
tio
n -
Live
To
ol
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
Note: Max Coolant Pressure 1015 PSI - Must use a minimum of a 5 micron coolant filter to prevent damage to the unit.
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
Clockwise Input
Clockwise Output
552.
165
1.65442
1.53539
552.
165
37
1.69
3
34
1.260
40
1.260
7.90
32 32
0.31
1
1.457
1.57
5
1.339
43
752.953
External or Internal
Coolant
Radial/
AxialMax. RPM Gear Ratio
Max. Torque
OutputCollet Size
Replacement
NutCoolant Nozzle
External Radial 6000 1:1 21ft-lbs (28.5N-m)ER25
(1/16” to 5/8”)NA25 TM100-31090 SP-41 FK-6
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
ER25OD Drill/Milling UnitPart #: MNZ20-ER25X Mori Seiki Part #: T32274
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
Output Max. Pressure (PSI) Collet Size
Replacement
Nut
Internal Radial 6500 1:1 18ft-lbs (25N-m) 1000ER25
(1/16” to 5/8”)NUT-MIM-ER25
WRENCH-MIM-107446
WRENCH-MIM-112913
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
ER25 OD Drill/Milling UnitPart #: MNZ20-ER25X-C-7MP-MI
Clockwise Input
Clockwise Output
20
50
20 S
tati
on
- Li
ve T
oo
l
Mori Seiki 20-Station NLX, DuraTurn, NZX and NTX3000 Series - Live Tools
Clockwise Input
Clockwise Output
External or Internal
Coolant
Radial/
AxialMax. RPM Gear Ratio
Max. Torque
OutputArbor Size Coolant Nozzle Spanner Wrench for Spindle
External Radial 2000 1:1 21ft.lbs (28.5N-m) 22mm TM100-31090 FK-8
1.260
1.57
540
32
22
2.480
56.501.457 2.224
37
0.86
6
63
7.90
0.31
1
1.53539
2.16
555
441.732
552.
165
Unit: mm [inch]
Replacement Arbor Screws for Shell Mill Holders available. See details on page 81.
OD Shell Mill Unit with 22mm Mill ArborPart #: MNZ20-SM22MMX Mori Seiki Part #: T32280
Clockwise Input
Clockwise Output
External or Internal
Coolant
Radial/
AxialMax. RPM Gear Ratio
Max. Torque
OutputCollet Size Replacement Nut Coolant Nozzle
External Radial 6000 1:1 21ft-lbs (28.5N-m)ER32
(1/8” to 25/32”)NUT-ER321 TM100-31090 FK-9
WRENCH- ER32I
471.850
2.16
555
471.850
552.
165
401.
575
1.26032
3.22882
0.31
17.
90
1.14229
532.0871.453
37
62.5
2.46
0
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
ER32 OD Drill/Milling UnitPart #: MNZ20-ER32X Mori Seiki Part #: T32475
20
51
Mori Seiki 20-Station NLX, DuraTurn, NZX and NTX3000 Series - Live Tools20
Sta
tio
n -
Live
To
ol
“Cam-Lock, Quick-Change” type tool. Please refer to pages 74 - 76 for Capto Holders and to page 82 for Torque Wrench details.
Clockwise Input
Clockwise Output
External or Internal
Coolant
Radial/
AxialMax. RPM Gear Ratio
Max. Torque
OutputCapto Size Coolant Nozzle Torque Wrench
External Radial 6000 1:1 21ft.lbs (28.5N-m) C3 TV-12 TQW-150 + TQW-CAPTO3(12)
12
2.323
0.472
40
1.555
1.57
5
39.529.50
59
1.161
7.90
0.31
1
572.
244
1.65442
1.65442
552.
165
Unit: mm [inch]
Capto C3 OD Drill/Milling UnitPart #: MNZ20-CAPTO3X-HS Mori Seiki Part #: T32290
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
Output Max. Pressure (PSI) Collet Size
Replacement
Nut
Internal Radial 6500 1:1 18ft-lbs (25N-m) 1000 n/a n/a n/aWRENCH-
MIM-170734
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
Mimatic MI40 Quick Change SystemOD Drill/Milling UnitPart #: MNZ20-MI40X-C-7MP-MI
Clockwise Input
Clockwise Output
20
52Note: Max Coolant Pressure 1015 PSI - Must use a minimum of a 5 micron coolant filter to prevent damage to the unit.
Please refer to pages 71 - 73 for Mimatic MI attachments.
20 S
tati
on
- Li
ve T
oo
l
Mori Seiki 20-Station NLX, DuraTurn, NZX and NTX3000 Series - Live Tools
Counter Clockwise Input
Clockwise Output
321.260
0.31
17.
9
3.66
193
3.34685 35
65
1.378
2.55
9
401.
575
371.457
391.535
1.26032
391.535
Unit: mm [inch]
External or
Internal Coolant
Radial/
AxialMax. RPM Gear Ratio
Max. Torque
Output
Center Height
(mm)Collet Size
Replacement
NutCoolant Nozzle
External Axial 10000 1:1 21ft.lbs (28.5N-m) 85ER16
(1/64” to 13/32”)NA16 TM100-31090 SP-41 FK-4
Spanner Wrench
for Spindle for Nut
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
ER16 Face Drill/Milling UnitPart #: MNZ20-ER16Z-HS Mori Seiki Part #: T32293
Counter Clockwise Input
Clockwise Output
361.417
391.535
391.535
351.378
2.55
965
3.34685
1.26032
401.
575
3.62
292
1.45737
7.90
0.31
1
Unit: mm [inch]
Part #: MNZ20-ER20Z Mori Seiki Part #: T32255
ER20 Face Drill/Milling Unit
External or
Internal Coolant
Radial/
AxialMax. RPM Gear Ratio
Max. Torque
Output
Center Height
(mm)Collet Size
Replacement
NutCoolant Nozzle
External Axial 6000 1:1 21ft.lbs (28.5N-m) 85ER20
(1/16” to 1/2”)NA20 TM100-31090 SP-41 FK-5
Spanner Wrench
for Spindle for Nut
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
20
53
Counter Clockwise Input
Clockwise Output
1.41736
1.53539 39
1.535
371.457
401.
575
4.01
610
2
1.37835
3.34685
1.26032
3.54
390
7.90
0.31
1
Unit: mm [inch]
External or
Internal Coolant
Radial/
AxialMax. RPM Gear Ratio
Max. Torque
Output
Max. Pressure
(PSI)
Center Height
(mm)Collet Size
Replacement
NutCoolant Nozzle
Internal Axial 6000 1:1 21ft.lbs (28.5N-m) 1000 85ER20
(1/16” to 1/2”)NA20 TM100-31090 SP-32 FK-5
Spanner Wrench
for Spindle for Nut
Note: Max Coolant Pressure 1015 PSI - Must use a minimum of a 5 micron coolant filter to prevent damage to the unit.
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
Mori Seiki 20-Station NLX, DuraTurn, NZX and NTX3000 Series - Live Tools20
Sta
tio
n -
Live
To
ol
20
Counter Clockwise Input
Clockwise Output
1.57
540
1.26032
3.81
997
371.457
371.457
853.346
2.55
965
7.90
0.31
1
431.693
1.53539 39
1.535
Unit: mm [inch]
External or
Internal Coolant
Radial/
AxialMax. RPM Gear Ratio
Max. Torque
Output
Center Height
(mm)Collet Size
Replacement
NutCoolant Nozzle
External Axial 6000 1:1 21ft.lbs (28.5N-m) 85ER25
(1/16” to 5/8”)NA25 TM100-31090 SP-41 FK-6
Spanner Wrench
for Spindle for Nut
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
ER25 Face Drill/Milling UnitPart #: MNZ20-ER25Z Mori Seiki Part #: T32275
ER20 Face Drill/Milling UnitPart #:MNZ20-ER20Z-C-7MP Mori Seiki Part #: T32288
54
20 S
tati
on
- Li
ve T
oo
l
Counter Clockwise Input
Clockwise Output
371.457
85
0.31
1
32
371.457
86
7.90
3.346
40
1.260
3.38
6
1.57
5
652.
559
62.52.460
1.65442 42
1.654
Unit: mm [inch]
External or
Internal Coolant
Radial/
AxialMax. RPM Gear Ratio
Max. Torque
Output
Center Height
(mm)Collet Size
Replacement
NutCoolant Nozzle
External Axial 6000 1:1 21ft.lbs (28.5N-m) 85ER32
(1/8” to 25/32”)NUT-ER32I TM100-31090 FK-9
WRENCH- ER32I
Spanner Wrench
for Spindle for Nut
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
Note: Max Coolant Pressure 1015 PSI - Must use a minimum of a 5 micron coolant filter to prevent damage to the unit.
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
Mori Seiki 20-Station NLX, DuraTurn, NZX and NTX3000 Series - Live Tools
ER32 Face Drill/Milling UnitPart #: MNZ20-ER32Z Mori Seiki Part #: T32476
Clockwise Input
Counter Clockwise Output
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
Output
Max. Pressure
(PSI)Collet Size Replacement Nut
Internal Axial 6500 1:1 18ft-lbs (25N-m) 1000ER25
(1/16” to 5/8”)NUT-MIM-ER25
WRENCH-MIM-112913
WRENCH-MIM-170734
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
Part #: MNZ20-ER25Z-C-7MP-MI
ER25 Face Drill/Milling Unit
20
55
Counter Clockwise Input
Clockwise Output
973.
819
100
3.93
7
3.34685
1.26032
401.
575
371.457
1.45737
371.457
7.90
0.31
1
1.69343
1.53539 39
1.535
Unit: mm [inch]
External or
Internal Coolant
Radial/
AxialMax. RPM Gear Ratio
Max. Torque
Output
Center Height
(mm)Collet Size
Replacement
NutCoolant Nozzle
External Z-Z 6000 1:1 21ft.lbs (28.5N-m) 85ER25
(1/16” to 5/8”)NA25 TM100-31090 FK-8 FK-6
Spanner Wrench
for Spindle for Nut
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
Mori Seiki 20-Station NLX, DuraTurn, NZX and NTX3000 Series - Live Tools20
Sta
tio
n -
Live
To
ol
ER25 Face Drill/Milling Unit2 Output (Main & Sub)Part #: MNZ20-ER25Z-MS Mori Seiki Part #: T32276
Counter Clockwise Input
Clockwise Output
361.417
1.53539 39
1.535
1.26032
3.34685
1.57
540
371.457
923.
622
923.
622
1.37835
7.9
0.31
1
Unit: mm [inch]
External or
Internal Coolant
Radial/
AxialMax. RPM Gear Ratio
Max. Torque
Output
Center Height
(mm)Collet Size
Replacement
NutCoolant Nozzle
External Z-Z 6000 1:1 21ft.lbs (28.5N-m) 85ER20
(1/16” to 1/2”)NA20 TM100-31090 SP-41 FK-5
Spanner Wrench
for Spindle for Nut
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
ER20 Face Drill/Milling Unit2 Output (Main & Sub)Part #: MNZ20-ER20Z-MS Mori Seiki Part #: T32271
56
20
20 S
tati
on
- Li
ve T
oo
l
“Cam-Lock, Quick-Change” type tool. Please refer to pages 74 - 76 for Capto Holders and to page 82 for Torque Wrench details.
Clockwise Input
Clockwise Output
2.36
260
3.15080
672.
638
44.501.752 1.654
42 421.654
401.
575
7.90
0.31
1
321.260
371.457
External or
Internal Coolant
Radial/
AxialMax. RPM Gear Ratio
Max. Torque
Output Max. Pressure (PSI)
Center Height
(mm)Capto Size Coolant Nozzle Torque Wrench
External Axial 6000 1:1 21ft.lbs (28.5N-m) 120 85 C3 HI10337110 TQW-150 + TQW-CAPTO3(12)
Unit: mm [inch]
57
Mori Seiki 20-Station NLX, DuraTurn, NZX and NTX3000 Series - Live Tools
Capto C3 Face Drill/Milling UnitPart #: MNZ20-CAPTO3Z-HS Mori Seiki Part #: T32291
Clockwise Input
Clockwise Output
90°
90°
752.953
0.906
95
40
1.26032
1.57
5
371.457
3.740
23
321.
260
361.417
4.13
410
5
1.41736
552.165 2.165
55
0.88
622
.50
622.
441
External or
Internal Coolant
Radial/
AxialMax. RPM Gear Ratio
Max. Torque
Output
Center Height
(mm)Collet Size
Replacement
NutCoolant Nozzle
External X-Z 4000 1:1 21ft.lbs (28.5N-m) 37ER16
(1/64” to 13/32”)NA16 A1207-1405 SP-27 FK-4
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
Please refer to pages 77 - 80 for ER Series Collets and ER Tap Collets details.
ER16 Adjustable Angle Drill/Milling UnitPart #: MNZ20-ER16-AD Mori Seiki Part #: T32289
20
20 S
tati
on
- Li
ve T
oo
lMori Seiki 20-Station NLX, DuraTurn, NZX and NTX3000 Series - Live Tools
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
Output
Max. Pressure
(PSI)
MI Attachment
SizeReplacement Nut
Internal Axial 6500 1:1 18ft-lbs (25N-m) 1000 MI40 n/a n/aWRENCH-
MIM-170734
Spanner Wrench
for Spindle for Nut
Unit: mm [inch]
Part #: MNZ20-MI40Z-C-7MP-MI
Counter Clockwise Input
Clockwise Output
1.45737
672.
638
371.457
853.346
1.26032
1.57
540
121.
504.
783
7.90
0.31
1
1.53539
1.26
032
0.86622
391.535
External or
Internal Coolant
Radial/
Axial
Max.
RPMGear Ratio
Max. Torque
Output Max. Pressure (PSI) Center Height (mm) Arbor Size Coolant Nozzle Spanner Wrench for Spindle
External Axial 2000 1:1 21ft.lbs (28.5N-m) 120 85 22mm TM100-31090 FK-8
Unit: mm [inch]
Replacement Arbor Screws for Shell Mill Holders available. See details on page 81.
Face Shell Mill Unit With 22mm Mill ArborPart #: MNZ20-SM22MMZ Mori Seiki Part #: T32292
58
Note: Max Coolant Pressure 1015 PSI - Must use a minimum of a 5 micron coolant filter to prevent damage to the unit.
Please refer to pages 71 - 73 for Mimatic MI attachments.
Counter
Clockwise Input
Clockwise Output
20Mimatic MI40 Quick Change SystemFace Drill/Milling Unit
20 S
tati
on
- St
atic
To
ol
Mori Seiki 20-Station NLX, DuraTurn, NZX and NTX3000 Series - Static Tools
20
Description Output Size Shaft Diameter
3/4” OD Turning Holder, Short 0.75” (19mm) 1.57” (40mm)
Description Output Size Shaft Diameter
3/4” OD Turning Holder, Long 0.75” (19mm) 1.57” (40mm)
652.559
391.
535
391.
535
501.969
2.20556 59
2.323
361.
417
3.74095
401.
57
0.75019.05
38.1
01.
500
19.9
50.
785
391.
535
652.559
501.969
391.
535
401.
57
702.756
2.3235956
2.205
200.
787
38.1
01.
500
19.050.750
19.9
50.
785
3/4” OD Turning Holder, Short
3/4” OD Turning Holder, Long
Part #: MNZ20-OD75X Mori Seiki Part #: T00234
Part #: MNZ20-OD75X-LG Mori Seiki Part #: T00235
Height from mounting face to the top is 2.75” (70mm)
Height from mounting face to the top is 3.74” (95mm)
Unit: mm [inch]
Unit: mm [inch]
59
20 S
tati
on
- St
atic
To
ol
Mori Seiki 20-Station NLX, DuraTurn, NZX and NTX3000 Series - Static Tools
20
Description Output Size Shaft Diameter
3/4” OD Turning Holder, 2 Output Y-Axis (Main) 0.75” (19.05mm) 1.57” (40mm)
Description Output Size Shaft Diameter
3/4” OD Turning Holder, Short, 2 Output (Main & Sub) 0.75” (19mm) 1.57” (40mm)
652.559
391.
535
391.
535
0.78
538
.10
1.50
019
.95
19.050.750 2.756
7040
1.57
823.228
461.
811
20
1.81
146
1.96950 62
0.787
2.441
0.39
410
20.5
00.
807
94 1.496
0.98
425
0.98
425
3.701 1.02
426
38
100.
394
0.61
0
70
15.5
0
2.756
39.9
01.
571
Unit: mm [inch]
3/4” OD Turning Holder2 Output Y-Axis (Main)Part #: MNZ20-OD75X-MD
Part #: MNZ20-OD75X-MS Mori Seiki Part #: T00250
Unit: mm [inch]
3/4” OD Turning Holder, Short2 Output (Main & Sub)
Tool not suitable for Mori Seiki DuraTurn Series.
Tool not suitable for Mori Seiki DuraTurn Series.
60
61
20 S
tati
on
- St
atic
To
ol
Mori Seiki 20-Station NLX, DuraTurn, NZX and NTX3000 Series - Static Tools
20
Description Output Size Shaft Diameter
3/4” OD Turning Holder, 4 Output Y-Axis (Main & Sub) 0.75” (19.05mm) 1.57” (40mm)
39.9
01.
571
2.75670
923.
622
20.5
0
1.81
1
3.22882 82
46
3.228
0.39
410
0.78720
0.80
7
15.5
00.
610
Unit: mm [inch]
3/4” OD Turning Holder4 Output Y-Axis (Main & Sub)Part #: MNZ20-OD75X-MSD
391.
535
652.559
391.
5351.
500
38.1
00.
785
19.9
5
19.050.750
953.740
401.
57
Unit: mm [inch]
3/4” OD Turning Holder, Long2 Output (Main & Sub)Part #: MNZ20-OD75X-LG-MS Mori Seiki Part #: T00249
Description Output Size Shaft Diameter
3/4” OD Turning Holder, Long, 2 Output (Main & Sub) 0.75” (19mm) 1.57” (40mm)
Tool not suitable for Mori Seiki DuraTurn Series.
62
20 S
tati
on
- St
atic
To
ol
Mori Seiki 20-Station NLX, DuraTurn, NZX and NTX3000 Series - Static Tools
20
Description Output Size Shaft Diameter
3/4” Cut-Off Holder, Right Hand 0.75” (19mm) 1.57” (40mm)
Description Output Size Shaft Diameter
3/4” ID Turning Holder 0.75” (19mm) 1.57” (40mm)
652.559
501.969
391.
535
0.750
19.9
5
19.05
0.78
51.
500
38.1
0
401.
57
803.150
351.
378
1.37835
803.
150
1154.528
391.
535
501.969
471.850 19
.05
0.75
0
652.559
19.9
5
18
0.78
5
0.709
19.5
50.
770
702.756
401.
57
3.03138
1.49677
552.
165
Unit: mm [inch]
Unit: mm [inch]
3/4” Cut-Off Holder, Right Hand
3/4” ID Turning Holder
Part #:MNZ20-CO75 Mori Seiki Part #: T00252
Part #: MNZ20-ID75Z Mori Seiki Part #: T03018
63
20 S
tati
on
- St
atic
To
ol
Mori Seiki 20-Station NLX, DuraTurn, NZX and NTX3000 Series - Static Tools
20
652.559
391.
535
1254.921
301.181
752.953
1264.961
783.071
3.937100
1.000
25.40
1.000
25.40
20R0.787
401.
57
29.50
0.39410 29.5
1.161
1.161 1.161
10
29.5
0.394
29.501.161
Unit: mm [inch]
1” Boring Bar Holder, 2 Output (Main & Sub)
Tool not suitable for Mori Seiki DuraTurn Series.
Description Output Size Shaft Diameter
1.25” Boring Bar Holder 1.25” (31.75mm) 1.57” (40mm)
391.
535
1003.937
542.126
391.
535
100.394
1.16129.5
401.
575
29.51.161
26R1.024
1.25031.75
1.57 40
1254.921
1154.528
783.071
1.25” Boring Bar HolderPart #: MNZ20-BG12Z Mori Seiki Part #: T10119
Unit: mm [inch]
Part #: MNZ20-BG10Z-MS Mori Seiki Part #: T10139
Description Output Size Shaft Diameter
1” Boring Bar Holder, 2 Output (Main & Sub) 1” (25.4mm) 1.57” (40mm)
20 S
tati
on
- St
atic
To
ol
Mori Seiki 20-Station NLX, DuraTurn, NZX and NTX3000 Series - Static Tools
20
281.
102
803.
150
803.150
19.05
0.750
1.57139.90
124.
504.
902
582.283
5.118130
250.9840.433
52110.984
Unit: mm [inch]
3/4” Boring Bar Holder 4 Output Y-Axis (Main & Sub)Part #: MNZ20-BG75Z-MSD
501.969
391.
535
391.
535
1154.528
1.25031.75
4.921125
1003.937
R1.024
26
401.
57
3.307
37
84
1.457
1.57
540
39.51.555
Part #: MNZ20-CH12Z-C Mori Seiki Part #: T13135
Unit: mm [inch]
1.25” Combination Holder
Description Output Size Shaft Diameter
1.25” Combination Holder 1.25” (31.75mm) 1.57” (40mm)
Description Output Size Shaft Diameter
3/4” Quad Boring Bar Holder, 4 Output Y-Axis (Main & Sub) 0.75” (19.05mm) 1.57” (40mm)
64
65
20
1.000
562.205
1.57139.90
3.78096
100
3.93
7
25.40
803.150
0.433
4.72
412
0
5.118130
3.937100
0.59115
250.984
85112.283
Unit: mm [inch]
Part #: MNZ20-BG10Z-MSD-C
1” Boring Bar Holder 4 Output Y-Axis (Main & Sub)
Mori Seiki 20-Station NLX, DuraTurn, NZX and NTX3000 Series - Static Tools
20 S
tati
on
- St
atic
To
ol
3.937100
1305.118
125
4.92
132.50
301.
181
3.15080
4.252108
1.57139.90
1.28032.50
1.000
25.40
1.280
752.
953
Unit: mm [inch]
1” Boring Bar Holder 6 Output Y-Axis (Main & Sub)Part #: MNZ20-BG10Z-MST-C
Description Output Size Shaft Diameter Maximum Internal Pressure
1” Boring Bar Holder, 6 Output Y-Axis (Main & Sub) 1” (25.4mm) 1.57” (40mm) 1000PSI
Description Output Size Shaft Diameter Maximum Internal Pressure
1” Quad Boring Bar Holder, 4 Output Y-Axis (Main & Sub) 1” (25.4mm) 1.57” (40mm) 1000PSI
20 S
tati
on
- St
atic
To
ol
Mori Seiki 20-Station NLX, DuraTurn, NZX and NTX3000 Series - Static Tools
622.441
3.54
390
3.15080
0.98
425
R25.501.004
39.901.571
4.882124
1003.937
Part #: MNZ20-ER32Z-MS-STAT
Unit: mm [inch]
ER32 Collet Chuck Static Holder2 Output (Main & Sub)
20
Description Output Size Shaft Diameter
ER32 Collet Chuck Static Holder, 2 Output (Main & Sub) ER32 (1/8-25/32”) 1.57” (40mm)
66
Description Output Size Shaft Diameter Maximum Internal Pressure
Capto C4 OD Holder C4 1.57” (40mm) 1000PSI
1.77245
391.
535
391.
535
39.501.555
1.57
5
742.
913
25
40
0.984
0.07
92
752.953
Unit: mm [inch]
Capto C4 OD Holder
Internal sleeves can be rotated to accommodate for main/sub clockwise and counterclockwise spindle rotation for left or right hand turning tools. See page 70 for details.
Note: Max Coolant Pressure 1015 PSI - Must use a minimum of a 5 micron coolant filter to prevent damage to the unit. “Cam-Lock, Quick-Change” type tool.
Part #: MNZ20-CAPTO4X-C-STAT Mori Seiki Part #: T12074
20 S
tati
on
- St
atic
To
ol
Mori Seiki 20-Station NLX, DuraTurn, NZX and NTX3000 Series - Static Tools
20
Description Output Size Shaft Diameter Maximum Internal Pressure
Capto C4 OD Holder, 2 Output (Main & Sub) C4 1.57” (40mm) 1000PSI
391.
535
501.969
250.984
0.55
114
1.96
950
1.57
540
752.953
522.047 0.965
24.50
1003.937
Part #: MNZ20-CAPTO4X-MS-CST Mori Seiki Part #: AC4-AMS100-WA
Unit: mm [inch]
Capto C4 OD Holder2 Output (Main & Sub)
Internal sleeves can be rotated to accommodate for main/sub clockwise and counterclockwise spindle rotation for left or right hand turning tools. See page 70 for details.
Note: Max Coolant Pressure 1015 PSI - Must use a minimum of a 5 micron coolant filter to prevent damage to the unit. “Cam-Lock, Quick-Change” type tool.
Description Output Size Shaft Diameter Maximum Internal Pressure
Capto C4 ID Holder C4 1.57” (40mm) 1000PSI
0.9842539
1.535
331.299
4.88
2
99.5
0
124
3.91
730
°
783.071
873.425
1.57540
1003.937
Unit: mm [inch]
Capto C4 ID HolderPart #: MNZ20-CAPTO4Z-C-STAT Mori Seiki Part #: T12075
Internal sleeves can be rotated to accommodate for main/sub clockwise and counterclockwise spindle rotation for left or right hand turning tools. See page 70 for details.
Note: Max Coolant Pressure 1015 PSI - Must use a minimum of a 5 micron coolant filter to prevent damage to the unit. “Cam-Lock, Quick-Change” type tool.
67
68
20 S
tati
on
- St
atic
To
ol
Mori Seiki 20-Station NLX, DuraTurn, NZX and NTX3000 Series - Static Tools
20
Description Output Size Shaft Diameter Maximum Internal Pressure
Capto C4 ID Holder, 2 Output (Main & Sub) C4 1.57” (40mm) 1000PSI
250.984
99.5
0
3.07178
30°
3.91
7
1.53539
124
4.88
2
1425.591
401.575
Unit: mm [inch]
Part #: MNZ20-CAPTO4Z-MS-CST Mori Seiki Part #: AC4-AMS100-WB
Capto C4 ID Holder2 Output (Main & Sub)
Internal sleeves can be rotated to accommodate for main/sub clockwise and counterclockwise spindle rotation for left or right hand turning tools. See page 70 for details.
Note: Max Coolant Pressure 1015 PSI - Must use a minimum of a 5 micron coolant filter to prevent damage to the unit. “Cam-Lock, Quick-Change” type tool.
70
How to Choose Cutting Heads for Capto Static Tools
Internal sleeves can be rotated to accommodate for main/sub clockwise and counterclockwisespindle rotation for left or right hand turning tools.
OD Cutting (T00208)
ID Cutting (T12068)
Right handed turning tool
(facing down)
Right handed boring tool
(facing down)
Right handed turning tool (facing up)
Left handed turning tool
(facing down)
Left handed boring tool
(facing down)
Left handed (facing down)
Main spindle
Main spindle
2nd spindle (sub)
2nd spindle (sub)
Holder rotated 180º
Sleeve rotated 180º
Left hand cutting (AC5-SSMS100-40000L)
71
Mimatic® MI Attachments
SYNAX® Tapping Quick Change Holder
Part Number Size l1 l2 d D SW
MI40-TAP3.5 MI40 0.669” 0.984” 3.5mm (.138”) 1.890” 0.106”
MI40-TAP4.5 MI40 0.669” 0.984” 4.5mm (.177”) 1.890” 0.134”
MI40-TAP6 MI40 0.669” 1.063” 6mm (.236”) 1.890” 0.193”
MI40-TAP8 MI40 0.669” 1.063” 8mm (.315”) 1.890” 0.244”
MI40-TAP9 MI40 1.496” 1.102” 9mm (.354”) 1.890” 0.276”
MI40-TAP10 MI40 1.496” 1.142” 10mm (.394”) 1.890” 0.315”
MI40-TAP12 MI40 1.496” 1.181” 12mm (.472”) 1.890” 0.354”
MI50-TAP3.5 MI50 0.650” 0.984” 3.5mm (.138”) 2.283” 0.106”
MI50-TAP4.5 MI50 0.650” 0.984” 4.5mm (.177”) 2.283” 0.134”
MI50-TAP6 MI50 0.650” 1.063” 6mm (.236”) 2.283” 0.193”
MI50-TAP8 MI50 0.650” 1.063” 8mm (.315”) 2.283” 0.244”
MI50-TAP9 MI50 0.650” 1.102” 9mm (.354”) 2.283” 0.276”
MI50-TAP10 MI50 0.650” 1.142” 10mm (.394”) 2.283” 0.315”
MI50-TAP12 MI50 0.650” 1.181” 12mm (.472”) 2.283” 0.354”
MI50-TAP16 MI50 1.732” 1.299” 16mm (.630”) 2.283” 0.472”
Part Number Size l1 l2 d D SW
MI40-TAP6C MI40 0.669” 1.063” 6mm (.236”) 1.890” 0.193”
MI40-TAP8C MI40 0.669” 1.063” 8mm (.315”) 1.890” 0.244”
MI40-TAP9C MI40 1.496” 1.102” 9mm (.354”) 1.890” 0.276”
MI40-TAP10C MI40 1.496” 1.142” 10mm (.394”) 1.890” 0.315”
MI40-TAP12C MI40 1.496” 1.181” 12mm (.472”) 1.890” 0.354”
MI50-TAP6C MI50 0.650” 1.063” 6mm (.236”) 2.283” 0.193”
MI50-TAP8C MI50 0.650” 1.063” 8mm (.315”) 2.283” 0.244”
MI50-TAP9C MI50 0.650” 1.102” 9mm (.354”) 2.283” 0.276”
MI50-TAP10C MI50 0.650” 1.142” 10mm (.394”) 2.283” 0.315”
MI50-TAP12C MI50 0.650” 1.181” 12mm (.472”) 2.283” 0.354”
MI50-TAP16C MI50 1.732” 1.299” 16mm (.630”) 2.283” 0.472”
without internal coolant,with synchronization and length compensation
Softsynchro Chuck (Licence Emuge)
Part Number Size Collet Thread l1 d D
MI40-ER-BG16 MI40 ER-GB16 M4-M12 1.870” .177-.394” 1.772”
MI50-ER-BG16 MI50 ER-GB16 M4-M12 1.752” .177-.394” 1.969”
with internal coolant,with push and pull length compensation 0.5mm
with internal coolant (70 bar),only synchronization
72
Mimatic® MI Attachments
Weldon Toolholder DIN 1835 B Whistle Notch Toolholder DIN 1835 E
Part Number Size l1 l2 l3 d(h5) D
MI40-EM6 MI40 2.362” 1.457” 1.024” 6 1.890”
MI40-EM8 MI40 2.362” 1.457” 1.024” 8 1.890”
MI40-EM10 MI40 2.480” 1.614” 1.142” 10 1.890”
MI40-EM12 MI40 2.559” 1.811” 1.220” 12 1.890”
MI40-EM14 MI40 2.559” 1.811” 1.220” 14 1.890”
MI40-EM16 MI40 2.677” 1.929” 1.339” 16 1.890”
MI40-EM1/4 MI40 2.362” 1.457” 1.024” 1/4” 1.890”
MI40-EM3/8 MI40 2.480” 1.614” 1.142” 3/8” 1.890”
MI40-EM1/2 MI40 2.559” 1.811” 1.220” 1/2” 1.890”
MI40-EM5/8 MI40 2.677” 1.929” 1.339” 5/8” 1.890”
MI50-EM6 MI50 2.559” 1.457” 0.945” 6 2.283”
MI50-EM8 MI50 2.598” 1.614” 0.984” 8 2.283”
MI50-EM10 MI50 2.756” 1.811” 1.142” 10 2.283”
MI50-EM12 MI50 2.874” 1.929” 1.260” 12 2.283”
MI50-EM14 MI50 2.874” 1.457” 1.260” 14 2.283”
MI50-EM16 MI50 2.913” 1.614” 1.299” 16 2.283”
MI50-EM20 MI50 3.071” 1.811” 1.457” 20 2.283”
MI50-EM1/4 MI50 2.559” 1.457” 0.945” 1/4” 2.283”
MI50-EM3/8 MI50 1.575” 1.614” 1.142” 3/8” 2.283”
MI50-EM1/2 MI50 2.874” 1.811” 1.260” 1/2” 2.283”
MI50-EM5/8 MI50 2.953” 1.929” 1.339” 5/8” 2.283”
MI50-EM3/4 MI50 3.071” 2.008” 1.457” 3/4” 2.283”
Part Number Size l1 l2 l3 d(h5) D
MI40-EM6A MI40 2.362” 1.417” 1.024” 6 1.890”
MI40-EM8A MI40 2.362” 1.417” 1.024” 8 1.890”
MI40-EM10A MI40 2.480” 1.575” 1.142” 10 1.890”
MI40-EM12A MI40 2.559” 1.772” 1.220” 12 1.890”
MI40-EM14A MI40 2.559” 1.772” 1.220” 14 1.890”
MI40-EM16A MI40 2.677” 1.890” 1.339” 16 1.890”
MI40-EM1/4A MI40 2.362” 1.417” 1.024” 1/4” 1.890”
MI40-EM3/8A MI40 2.480” 1.575” 1.142” 3/8” 1.890”
MI40-EM1/2A MI40 2.559” 1.772” 1.220” 1/2” 1.890”
MI40-EM5/8A MI40 2.677” 1.890” 1.339” 5/8” 1.890”
MI50-EM6A MI50 2.559” 1.417” 0.945” 6 2.283”
MI50-EM8A MI50 2.598” 1.417” 0.984” 8 2.283”
MI50-EM10A MI50 2.756” 1.575” 1.142” 10 2.283”
MI50-EM12A MI50 2.874” 1.772” 1.260” 12 2.283”
MI50-EM14A MI50 2.874” 1.772” 1.260” 14 2.283”
MI50-EM16A MI50 2.972” 1.890” 1.358” 16 2.283”
MI50-EM20A MI50 3.071” 1.969” 1.457” 20 2.283”
MI50-EM1/4A MI50 2.559” 1.417” 0.945” 1/4” 2.283”
MI50-EM3/8A MI50 2.756” 1.575” 1.142” 3/8” 2.283”
MI50-EM1/2A MI50 2.874” 1.772” 1.260” 1/2” 2.283”
MI50-EM5/8A MI50 2.953” 1.890” 1.339” 5/8” 2.283”
MI50-EM3/4A MI50 3.071” 1.969” 1.457” 3/4” 2.283”
73
Mimatic® MI Attachments
Long type, clamping nut outside
Combination Shell End Mill Arbor
Part Number Size l1 l2 l3 d(h6) D
MI40-SM16 MI40 2.894” 1.555” 0.984” 16mm (.630”) 1.890”
MI50-SM16 MI50 3.228” 1.614” 1.063” 16mm (.630”) 2.283”
MI50-SM22 MI50 3.465” 1.850” 1.220” 22mm (.866”) 2.283”
MI50-SM3/4 MI50 3.150” 1.496” 1.260” .750” (3/4”) 2.283”
Collet Chuck DIN 6499 - Type ERShort type, clamping nut inside
Part Number Size Collet l1 l2 D
MI40-ER16I MI40 ER16 1.772” 0.433” 1.890”
MI40-ER20I MI40 ER20 1.929” 0.591” 1.890”
MI40-ER25I MI40 ER25 2.165” 0.827” 1.890”
MI50-ER25I MI50 ER25 2.165” 0.551” 2.283”
MI50-ER32I MI50 ER32 2.323” 0.709” 2.283”
Part Number Size Collet l1 l2 D
MI40-ER16 MI40 ER16 2.283” 0.945” 1.890”
MI40-ER20 MI40 ER20 2.520” 1.181” 1.890”
MI50-ER25 MI50 ER25 2.571” 1.614” 2.283”
MI50-ER32 MI50 ER32 2.835” 1.850” 2.283”
Part Number Size l1 l2 D
MI40-BLANK MI40 3.701” 2.362” 1.890”
MI50-BLANK MI50 4.370” 2.756” 2.283”
Blank
Part Number Size l1 l2 l3 d(h6) D
MI40-SF8 MI40 3.701” 2.362” 1.417” 8mm (.315”) 1.890”
MI40-SF10 MI40 3.701” 2.362” 1.654” 10mm (.394”) 1.890”
MI40-SF12 MI40 3.898” 2.559” 1.850” 12mm (.472”) 1.890”
MI40-SF16 MI40 4.094” 2.756” 1.969” 16mm (.630”) 1.890”
MI50-SF8 MI50 3.976” 2.362” 1.417” 8mm (.315”) 2.283”
MI50-SF10 MI50 3.976” 2.362” 1.654” 10mm (.394”) 2.283”
MI50-SF12 MI50 4.137” 2.559” 1.850” 12mm (.472”) 2.283”
MI50-SF14 MI50 4.137” 2.559” 1.850” 14mm (.551”) 2.283”
MI50-SF16 MI50 4.370” 2.756” 1.969” 16mm (.630”) 2.283”
MI50-SF18 MI50 4.567” 2.953” 1.969” 18mm (.709”) 2.283”
MI50-SF20 MI50 4.567” 2.953” 2.047” 20mm (.787”) 2.283”
Shrink Fit Chuck
Part Number Size VDI A
MI40-PRESET-VDI40 MI40 2.520” 108mm
MI50-PRESET-VDI40 MI50 2.795” 110mm
Tool Presetting Unit
Part Number Size l1 l2 l3 d(h6) D
MI40-HC12 MI40 2.520” 1.772” 1.181” 12mm (.472”) 1.890”
MI50-HC20 MI50 2.795” 2.047” 1.181” 20mm (.787”) 2.283”
Hydraulic Chuck
Capto ER Collet Chucks and Tap Holders
Capto ER Collet Chuck Holders
Part NumberCollet Size
dD D1 I1 I2 I3 Nut
Wrenchmm inch mm inch mm inch mm inch mm inchAC3 - ECH10F - 35 ER16 1-10 32 1.260 30 1.818 35 1.378 21 0.827 33.0 1.299 FK-4
AC3 - ECH13F - 43 ER20 1-13 32 1.260 35 1.378 43 1.693 - - 37.0 1.457 FK-5
AC4 - ECH13F - 45 ER20 1-13 40 1.575 35 1.378 45 1.772 25 0.984 37.0 1.457 FK-5
AC4 - ECH16F - 50 ER25 1-16 40 1.575 42 1.654 40 1.969 - - 41.5 1.634 FK-6
AC4 - ECH20F - 55 ER32 3-20 40 1.575 50 1.969 55 2.165 - - 47.5 1.870 FK-7
AC5 - ECH7F - 60 ER11 0.5-7 50 1.969 23 1.906 60 2.362 38 1.496 22.5 0.866 FK-3
AC5 - ECH7F - 90 ER11 0.5-7 50 1.969 23 1.906 90 3.543 68 2.677 22.5 0.866 FK-3
AC5 - ECH10F - 60 ER16 1-10 50 1.969 30 1.818 60 2.362 38 1.496 33.0 1.299 FK-4
AC5 - ECH10F - 90 ER16 1-10 50 1.969 30 1.818 90 3.543 68 2.677 33.0 1.299 FK-4
AC5 - ECH13F - 60 ER20 1-13 50 1.969 35 1.378 60 2.362 38 1.496 37.0 1.457 FK-5
AC5 - ECH13F - 90 ER20 1-13 50 1.969 35 1.378 90 3.543 68 2.677 37.0 1.457 FK-5
AC5 - ECH16F - 60 ER25 1-16 50 1.969 42 1.654 60 2.362 38 1.496 41.5 1.634 FK-6
AC5 - ECH16F - 90 ER25 1-16 50 1.969 42 1.654 90 3.543 68 2.677 41.5 1.634 FK-6
AC5 - ECH20F - 60 ER32 3-20 50 1.969 50 1.969 60 2.362 - - 47.5 1.870 FK-7
AC5 - ECH20F - 90 ER32 3-20 50 1.969 50 1.969 90 3.543 - - 47.5 1.870 FK-7
AC5 - ECH26F - 70 ER40 3-26 50 1.969 61.5 2.421 70 2.756 - - 54.5 2.146 FK-9
Part NumberCollet
Size
Tap Size Axial Ext. D D1 D2 l1 l2 l3Nut
Nut
Wrench
Setting
Wrenchmm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch
AC3-ETH10M-44 ER16 M4-M12 #6 to 7/16 8 0.315 32 1.260 22 0.866 32 1.260 40 1.732 27 1.063 32 1.260 NA16M E16M SP15
AC4-ETH13F-50 ER20 M4-M14 #6 to 1/2 10 0.394 40 1.575 35 1.378 40 1.575 50 1.969 31 1.220 36 1.417 NA20F FK-5 SP21
AC5-ETH13F-60 ER20 M4-M14 #6 to 1/2 10 0.394 50 1.969 35 1.378 40 1.575 60 2.362 31 1.220 36 1.417 NA20F FK-5 SP21
AC5-ETH16F-60 ER25 M6-M18 1/4 to 5/8 10 0.394 50 1.969 42 1.654 50 1.969 60 2.362 35 1.378 40.5 1.594 NA25F FK-6 SP27
Capto ER Tap Holders
Please refer to pages 57 - 60 for ER Series Collets details.
Please refer to pages 57 - 60 for Capto ER Tap Holders details.
74
Capto Milling Chuck, Morse Taper and End Mill Holders
Capto Milling Chuck Holders
D
l1
l2
D1 d
Capto Morse Taper HoldersI1
I2D
1 D
MT No.
Capto End Mill Holders
M
H1
L
D1 d
L1 L2
Part NumberCollet Size
d D D1 I1 I2 Nut Wrenchmm inch mm inch mm inch mm inch mm inch
AC4-TRX16-70 AS16 16 0.630 40 1.575 45 1.772 70 2.756 65 2.559 FK-6AC4-TRX20-75 AS20 20 0.787 40 1.575 52 2.047 75 2.953 69 2.717 FK-8AC4-TRX5/8-70 AS5/8 15.875 0.625 40 1.575 45 1.772 70 2.756 65 2.559 FK-6AC4-TRX3/4-75 ASS3/4 19.05 0.750 40 1.575 52 2.047 75 2.953 69 2.717 FK-8
Part Numberd D1 L H1 L1 L2 M
mm inch mm inch mm inch mm inch mm inch mm inch mm inchAC5-SLA20-65 20 0.787 50 1.969 65 2.559 60 2.362 17 0.669 20 0.787 10 0.394AC5-SLA25-75 25 0.984 55 2.165 75 2.953 65 2.559 20 0.787 25 0.984 12 0.472AC5-SLA32-80 32 1.260 60 2.362 80 3.150 70 2.756 23 0.906 25 0.984 16 0.630AC5-SLA3/4-65 19.05 0.750 50 1.969 65 2.559 60 2.362 17 0.669 20 0.787 10 0.394AC5-SLA1-75 25.4 1.000 55 2.165 75 2.953 65 2.559 20 0.787 25 0.984 12 0.472AC5-SLA5/4-80 31.875 1.255 60 2.362 80 3.150 70 2.756 23 0.906 25 0.984 16 0.630
Part NumberTaper Size
D D1 I1 I2Drawing Bolt
mm inch mm inch mm inch mm inchAC3-MTA1-90 1 32 1.260 25 0.984 90 3.543 71.5 2.815 M6*30
AC3-MTA2-95 2 32 1.260 32 1.260 95 3.740 80 3.150 NA
AC4-MTA1-90 1 40 1.575 25 0.984 90 3.543 68 2.677 M6*30
AC4-MTA2-95 2 40 1.575 32 1.260 95 3.740 73 2.874 NA
AC4-MTA3-115 3 40 1.575 40 1.575 115 4.528 95 3.740 NA
AC5-MTA2-105 2 50 1.969 32 1.260 105 4.134 82 3.228 M10*35 (special)
AC5-MTA3-115 3 50 1.969 40 1.575 115 4.528 92 3.622 NA
AC5-MTA4-145 4 50 1.969 52 2.047 145 5.709 125 4.921 NA
Please refer to page 55 for Milling Chuck KM Collets details.
75
Capto Square Shank Holders and Tool Clamper
Capto Square Shank Holders
øD1
f2f1
f3
f4K
M
K
øD
I1
Capto Square Shank Holders
øD1
K f4
K
f2
f1
f3
Ml2
l1
øD
Capto Tool Clamper
L
W H
ød
Part NumberSquare Shank D D1 I1 I2 f1 f2 K
Mmm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch
AC4-ABSB101-422LO 20 0.787 40 1.575 100 3.937 80 3.150 57 2.244 40 1.575 20 0.787 20 0.787 M10
AC4-ABSB101-422RO 20 0.787 40 1.575 100 3.937 80 3.150 57 2.244 40 1.575 20 0.787 20 0.787 M10
AC5-ABSB101-522LO 25 0.984 50 1.969 110 4.331 90 3.543 67 2.638 43 1.693 18 0.709 25 0.984 M12
AC5-ABSB101-522RO 25 0.984 50 1.969 110 4.331 90 3.543 67 2.638 43 1.693 18 0.709 25 0.984 M12
Part NumberSquare Shank D D1 I1 f1 f2 K
Mmm inch mm inch mm inch mm inch mm inch mm inch mm inch
AC4-ABSB101-421LO 20 0.787 40 1.575 95 3.740 60 2.362 40 1.575 20 0.787 20 0.787 M10
AC4-ABSB101-421RO 20 0.787 40 1.575 95 3.740 60 2.362 40 1.575 20 0.787 20 0.787 M10
AC5-ABSB101-521LO 25 0.984 50 1.969 110 4.331 70 2.756 50 1.969 25 0.984 25 0.984 M12
AC5-ABSB101-521RO 25 0.984 50 1.969 110 4.331 70 2.756 50 1.969 25 0.984 25 0.984 M12
Part NumberCapto Size
d W H Lmm inch mm inch mm inch mm inch
AC4-TC40 C4 40 1.57 120 4.72 45 1.77 123 4.84
AC5-TC50 C5 50 1.97 120 4.72 50 1.97 143 5.63
76
ER Series Collets
SIZE ER16 ER20 ER25 ER32 ER401/32” E16-002 - - - -
1/16” E16-004 E20-004 E25-004 - -
3/32” E16-006 E20-006 E25-006 - -
1/8” E16-008 E20-008 E25-008 E32-008 -
5/32” E16-010 E20-010 E25-010 E32-010 E40-010
3/16” E16-012 E20-012 E25-012 E32-012 E40-012
7/32” E16-014 E20-014 E25-014 E32-014 E40-014
1/4” E20-016 E20-016 E25-016 E32-016 E40-016
9/32” E20-018 E20-018 E25-018 E32-018 E40-018
5/16” E20-020 E20-020 E25-020 E32-020 E40-020
11/32” E20-022 E20-022 E25-022 E32-022 E40-022
3/8” E20-024 E20-024 E25-024 E32-024 E40-024
13/32” E20-026 E20-026 E25-026 E32-026 E40-026
7/16” - E20-028 E25-028 E32-028 E40-028
15/32” - E20-030 E25-030 E32-030 E40-030
1/2” - E20-032 E25-032 E32-032 E40-032
17/32” - - E25-034 E32-034 E40-034
9/16” - - E25-036 E32-036 E40-036
19/32” - - E25-038 E32-038 E40-038
5/8” - - E25-040 E32-040 E40-040
21/32” - - - E32-042 E40-042
11/16” - - - E32-044 E40-044
23/32” - - - E32-046 E40-046
3/4” - - - E32-048 E40-048
25/32” - - - E32-050 E40-050
13/16” - - - - E40-052
27/32” - - - - E40-044
7/8” - - - - E40-056
29/32” - - - - E40-058
15/16” - - - - E40-060
31/32” - - - - E40-062
1” - - - - E40-064
STANDARD (INCH) STANDARD (METRIC)
SIZE ER16 ER20 ER25 ER32 ER401.0mm E16-039 - - - -
1.5mm E16-059 - - - -
2.0mm E16-078 E20-078 E25-078 - -
3.0mm E16-118 E20-118 E25-118 E32-118 -
3.5mm E16-137 E20-137 E25-137 E32-137 -
4.0mm E16-157 E20-157 E25-157 E32-157 E40-157
5.0mm E16-196 E20-196 E25-196 E32-196 E40-196
6.0mm E16-236 E20-236 E25-236 E32-236 E40-236
7.0mm E16-275 E20-275 E25-275 E32-275 E40-275
8.0mm E16-314 E20-314 E25-314 E32-314 E40-314
9.0mm E16-354 E20-354 E25-354 E32-354 E40-354
10.0mm E16-393 E20-393 E25-393 E32-393 E40-393
11.0mm - E20-433 E25-433 E32-433 E40-433
11.5mm - E20-452 E25-452 E32-452 E40-452
12.0mm - E20-472 E25-472 E32-472 E40-472
13.0mm - E20-511 E25-511 E32-511 E40-511
14.0mm - - E25-551 E32-551 E40-551
15.0mm - - E25-590 E32-590 E40-590
16.0mm - - E25-629 E32-629 E40-629
17.0mm - - - E32-669 E40-669
18.0mm - - - E32-708 E40-708
19.0mm - - - E32-748 E40-748
19.5mm - - - E32-767 E40-767
20.0mm - - - E32-787 E40-787
21.0mm - - - - E40-826
22.0mm - - - - E40-866
23.0mm - - - - E40-905
24.0mm - - - - E40-944
25.0mm - - - - E40-984
26.0mm - - - - E40-1023
Style D D1 L Collet RangeCoolant Collet
Size RangeNut Tightening Torque
standard collet counter-bored collet
ER16 17.2mm 11.3mm 27.0mm 0.5 - 10.0mm 4.0 - 10.0mm (3/16” - 17/64”) 30 - 37 ft-lbs 18 - 22 ft-lbs
ER20 21.2mm 14.5mm 31.0mm 1.0 - 13.0mm 5.0 - 13.0mm (5/32” - 1/2”) 60 - 74 ft-lbs 42 - 52 ft-lbs
ER25 26.2mm 18.5mm 35.0mm 1.0 - 16.0mm 6.0 - 16.0mm (7/32” - 5/8”) 77 - 96 ft-lbs 54 - 67 ft-lbs
ER32 33.2mm 24.4mm 40.0mm 2.0 - 20.0mm 10.0 - 20.0mm (1/4” - 25/32”) 100 - 125 ft-lbs 77 - 96 ft-lbs
ER40 41.2mm 31.2mm 46.0mm 3.0mm - 26.0mm 10.0 - 26.0mm 125 - 157 ft-lbs 130 - 162 ft-lbs
ER Standardtype collet
ER Counter-Bored type collet
77
ER Series Coolant Collets
SIZE ER16 ER20 ER25 ER323/32” E16-006(C) - - -
7/64” E16-007(C) - - -
1/8” E16-008(C) - - -
9/64” E16-009(C) - - -
5/32” E16-010(C) E20-010(C) - -
11/64” E16-011(C) E20-011(C) - -
3/16” E16-012(C) E20-012(C) - -
13/64” E16-013(C) E20-013(C) - -
7/32” E16-014(C) E20-014(C) E25-014(C) -
15/64” E16-015(C) E20-015(C) E25-015(C) -
1/4” E16-016(C) E20-016(C) E25-016(C) E32-016(C)
17/64” E16-017(C) E20-017(C) E25-017(C) E32-017(C)
9/32” E16-018(C) E20-018(C) E25-018(C) E32-018(C)
19/64” E16-019(C) E20-019(C) E25-019(C) E32-019(C)
5/16” E16-020(C) E20-020(C) E25-020(C) E32-020(C)
21/64” E16-021(C) E20-021(C) E25-021(C) E32-021(C)
11/32” E16-022(C) E20-022(C) E25-022(C) E32-022(C)
23/64” E16-023(C) E20-023(C) E25-023(C) E32-023(C)
3/8” E16-024(C) E20-024(C) E25-024(C) E32-024(C)
25/64” E16-025(C) E20-025(C) E25-025(C) E32-025(C)
13/32” E16-026(C) E20-026(C) E25-026(C) E32-026(C)
27/64” - E20-027(C) E25-027(C) E32-027(C)
7/16” - E20-028(C) E25-028(C) E32-028(C)
29/64” - E20-029(C) E25-029(C) E32-029(C)
15/32” - E20-030(C) E25-030(C) E32-030(C)
31/64” - E20-031(C) E25-031(C) E32-031(C)
1/2” - E20-032(C) E25-032(C) E32-032(C)
33/64” - - E25-033(C) E32-033(C)
17/32” - - E25-034(C) E32-034(C)
35/64” - - E25-035(C) E32-035(C)
9/16” - - E25-036(C) E32-036(C)
37/64” - - E25-037(C) E32-037(C)
19/32” - - E25-038(C) E32-038(C)
39/64” - - E25-039(C) E32-039(C)
5/8” - - E25-040(C) E32-040(C)
41/64” - - - E32-041(C)
21/32” - - - E32-042(C)
43/64” - - - E32-043(C)
11/16” - - - E32-044(C)
45/64” - - - E32-045(C)
23/32” - - - E32-046(C)
47/64” - - - E32-047(C)
3/4” - - - E32-048(C)
49/64” - - - E32-049(C)
25/32” - - - E32-050(C)
COOLANT (INCH) COOLANT (METRIC)
SIZE ER16 ER20 ER25 ER32 ER404.0mm E16-157(C) - - - -
4.5mm E16-177(C) - - - -
5.0mm E16-196(C) E20-196(C) - - -
5.5mm E16-216(C) E20-216(C) - - -
6.0mm E16-236(C) E20-236(C) E25-236(C) - -
6.5mm E16-255(C) E20-255(C) E25-255(C) - -
7.0mm E16-275(C) E20-275(C) E25-275(C) - -
7.5mm E16-295(C) E20-295(C) E25-295(C) - -
8.0mm E16-314(C) E20-314(C) E25-314(C) - -
8.5mm E16-334(C) E20-334(C) E25-334(C) - -
9.0mm E16-354(C) E20-354(C) E25-354(C) - -
9.5mm E16-374(C) E20-374(C) E25-374(C) - -
10.0mm E16-393(C) E20-393(C) E25-393(C) E32-393(C) E40-393(C)
10.5mm - E20-413(C) E25-413(C) E32-413(C) E40-413(C)
11.0mm - E20-433(C) E25-433(C) E32-433(C) E40-433(C)
11.5mm - E20-452(C) E25-452(C) E32-452(C) E40-452(C)
12.0mm - E20-472(C) E25-472(C) E32-472(C) E40-472(C)
12.5mm - E20-492(C) E25-492(C) E32-492(C) E40-492(C)
13.0mm - E20-511(C) E25-511(C) E32-511(C) E40-511(C)
13.5mm - - E25-531(C) E32-531(C) E40-531(C)
14.0mm - - E25-551(C) E32-551(C) E40-551(C)
14.5mm - - E25-570(C) E32-570(C) E40-570(C)
15.0mm - - E25-590(C) E32-590(C) E40-590(C)
15.5mm - - E25-610(C) E32-610(C) E40-610(C)
16.0mm - - E25-629(C) E32-629(C) E40-629(C)
16.5mm - - - E32-649(C) E40-649(C)
17.0mm - - - E32-669(C) E40-669(C)
17.5mm - - - E32-688(C) E40-688(C)
18.0mm - - - E32-708(C) E40-708(C)
18.5mm - - - E32-728(C) E40-728(C)
19.0mm - - - E32-748(C) E40-748(C)
19.5mm - - - E32-767(C) E40-767(C)
20.0mm - - - E32-787(C) E40-787(C)
20.5mm - - - - E40-807(C)
21.0mm - - - - E40-826(C)
21.5mm - - - - E40-846(C)
22.0mm - - - - E40-866(C)
22.5mm - - - - E40-885(C)
23.0mm - - - - E40-905(C)
23.5mm - - - - E40-925(C)
24.0mm - - - - E40-944(C)
24.5mm - - - - E40-964(C)
25.0mm - - - - E40-984(C)
25.5mm - - - - E40-1003(C)
26.0mm - - - - E40-1023(C)
78
ER Tap Collets
PART NUMBER TAP INCH SIZE TAP METRIC SIZE L1ET16-168 #8, 5/32” M4 18.0mm 0.168 0.131ET16-194 #10, 3/16” M4.5, M5 18.0mm 0.194 0.152ET16-220 #12, 7/32” - 18.0mm 0.220 0.165ET16-255 #14, 1/4” M6, M6.5 18.0mm 0.255 0.191ET20-168 #8, 5/32” M4 18.0mm 0.168 0.131ET20-194 #10, 3/16” M4.5, M5 18.0mm 0.194 0.152ET20-220 #12, 7/32” - 18.0mm 0.220 0.165ET20-255 #14, 1/4” M6, M6.5 18.0mm 0.255 0.191ET20-318 5/16” M7, M6.5 18.0mm 0.318 0.238ET20-323 7/16” - 18.0mm 0.323 0.242ET20-367 1/2” M12, M12.5 18.0mm 0.367 0.275ET20-381 3/8” M10 18.0mm 0.381 0.286ET25-168 #8, 5/32” M4 18.0mm 0.168 0.131ET25-194 #10, 3/16” M4.5, M5 18.0mm 0.194 0.152ET25-220 #12, 7/32” - 18.0mm 0.220 0.165ET25-255 #14, 1/4” M6, M6.5 18.0mm 0.255 0.191ET25-318 5/16” M7, M6.5 18.0mm 0.318 0.238ET25-323 7/16” - 18.0mm 0.323 0.242ET25-367 1/2” M12, M12.5 18.0mm 0.367 0.275ET25-381 3/8” M10 18.0mm 0.381 0.286ET25-429 9/16” M14 22.0mm 0.429 0.322ET25-437 1/8” NPT(L) - 22.0mm 0.437 0.328ET25-480 5/8” M16 25.0mm 0.480 0.360ET32-168 #8, 5/32” M4 18.0mm 0.168 0.131ET32-194 #10, 3/16” M4.5, M5 18.0mm 0.194 0.152ET32-220 #12, 7/32” - 18.0mm 0.220 0.165ET32-255 #14, 1/4” M6, M6.5 18.0mm 0.255 0.191ET32-318 5/16” M7, M6.5 18.0mm 0.318 0.238ET32-323 7/16” - 18.0mm 0.323 0.242ET32-367 1/2” M12, M12.5 18.0mm 0.367 0.275ET32-381 3/8” M10 18.0mm 0.381 0.286ET32-429 9/16” M14 22.0mm 0.429 0.322ET32-437 1/8” NPT - 22.0mm 0.437 0.328ET32-480 5/8” M16 25.0mm 0.480 0.360ET32-542 11/16” M18 25.0mm 0.542 0.406ET32-562 1/4” NPT - 25.0mm 0.562 0.421ET32-590 3/4” - 25.0mm 0.590 0.422ET32-652 13/16” M20 25.0mm 0.652 0.489ET40-255 #14, 1/4” M6, M6.5 18.0mm 0.255 0.191ET40-318 5/16” M7, M6.5 18.0mm 0.318 0.238ET40-323 7/16” - 18.0mm 0.323 0.242ET40-367 1/2” M12, M12.5 18.0mm 0.367 0.275ET40-381 3/8” M10 18.0mm 0.381 0.286ET40-429 9/16” M14 22.0mm 0.429 0.322ET40-437 1/8” NPT - 22.0mm 0.437 0.328ET40-480 5/8” M16 25.0mm 0.480 0.360ET40-542 11/16” M18 25.0mm 0.542 0.406ET40-562 1/4” NPT - 25.0mm 0.562 0.421ET40-590 3/4” - 25.0mm 0.590 0.422ET40-652 13/16” M20 25.0mm 0.652 0.489ET40-687 1/2” NPT - 25.0mm 0.687 0.515ET40-697 7/8” M22 25.0mm 0.697 0.523ET40-700 3/8” NPT - 25.0mm 0.700 0.531ET40-760 15/16” M24 25.0mm 0.760 0.570ET40-800 1” M25 28.0mm 0.800 0.600
Ø
ER Tap Collets feature a unique design that incorporates an internal square drive with our popular ER Series collets. The square drive matches the tap square, providing a tight fit for all rigid tapping applications.
79
PART NUMBER TAP INCH SIZE TAP METRIC SIZE L1ET16-255(C) #14, 1/4” M6, M6.5 18.0mm 0.255 0.191ET16-318(C) 5/16” M7, M6.5 18.0mm 0.318 0.238ET20-255(C) #14, 1/4” M6, M6.5 18.0mm 0.255 0.191ET20-318(C) 5/16” M7, M6.5 18.0mm 0.318 0.238ET20-323(C) 7/16” - 18.0mm 0.323 0.242ET20-367(C) 1/2” M12, M12.5 18.0mm 0.367 0.275ET20-381(C) 3/8” M10 18.0mm 0.381 0.286ET25-318(C) 5/16” M7, M6.5 18.0mm 0.318 0.238ET25-323(C) 7/16” - 18.0mm 0.323 0.242ET25-367(C) 1/2” M12, M12.5 18.0mm 0.367 0.275ET25-381(C) 3/8” M10 18.0mm 0.381 0.286ET25-429(C) 9/16” M14 22.0mm 0.429 0.322ET25-480(C) 5/8” M16 25.0mm 0.480 0.360ET32-255(C) #14, 1/4” M6, M6.5 18.0mm 0.255 0.191ET32-318(C) 5/16” M7, M6.5 18.0mm 0.318 0.238ET32-323(C) 7/16” - 18.0mm 0.323 0.242ET32-367(C) 1/2” M12, M12.5 18.0mm 0.367 0.275ET32-381(C) 3/8” M10 18.0mm 0.381 0.286ET32-429(C) 9/16” M14 22.0mm 0.429 0.322ET32-480(C) 5/8” M16 25.0mm 0.480 0.360ET32-542(C) 11/16” M18 25.0mm 0.542 0.406ET32-590(C) 3/4” - 25.0mm 0.590 0.422ET32-652(C) 13/16” M20 25.0mm 0.652 0.489ET40-323(C) 7/16” - 18.0mm 0.323 0.242ET40-367(C) 1/2” M12, M12.5 18.0mm 0.367 0.275ET40-381(C) 3/8” M10 18.0mm 0.381 0.286ET40-429(C) 9/16” M14 22.0mm 0.429 0.322ET40-480(C) 5/8” M16 25.0mm 0.480 0.360ET40-542(C) 11/16” M18 25.0mm 0.542 0.406ET40-590(C) 3/4” - 25.0mm 0.590 0.422ET40-652(C) 13/16” M20 25.0mm 0.652 0.489ET40-697(C) 7/8” M22 25.0mm 0.697 0.523ET40-760(C) 15/16” M24 25.0mm 0.760 0.570ET40-800(C) 1” M25 28.0mm 0.800 0.600
Ø
Lyndex-Nikken has now combined the versatility of our ER tapping collets with the popularity of our coolant collets to create our patented ER Coolant Tap Collets.
Note: Seals up to maximum coolant pressure of 1000 PSI.
ER Tap Coolant Collets
80
Replacement Parts
Milling Chuck Collets are designed to insure uniform collapsing around the cutting tool shank. This provides maximum gripping power as well as concentric positioning of the cutting tool.
20mm KM COLLET (METRIC)
20mm KM COLLET (INCH)
Replacement Set Screws for End Mill Holders
Milling Chuck Collet and Wrench
Replacement Arbor Screws for Shell Mill Holders
Part Number Size of Holder I.D.
S5/8-18X1/2 3/4”, 7/8”, 18 - 20mm
S3/4-16X11/16 1”, 1-1/4”, 1-1/2”, 25 - 42mm
Part Number Size
9HC22 3/4” and 20mm Milling Chuck Spanner Wrench
Part Number Description
A1/2-20 use with 1” holders
A10mm-P1.5 use with 22.0mm holders
Part Number Size
KM20-1/8 1/8”
KM20-3/16 3/16”
KM20-1/4 1/4”
KM20-5/16 5/16”
KM20-3/8 3/8”
KM20-7/16 7/16”
KM20-1/2 1/2”
KM20-9/16 9/16”
KM20-5/8 5/8”
3/4” KM COLLET (INCH)
Part Number SizeKM3/4-1/8 1/8”
KM3/4-3/16 3/16”
KM3/4-1/4 1/4”
KM3/4-5/16 5/16”
KM3/4-3/8 3/8”
KM3/4-7/16 7/16”
KM3/4-1/2 1/2”
KM3/4-5/8 5/8”
Part Number Size
KM20-3 3.0mm
KM20-4 4.0mm
KM20-6 6.0mm
KM20-8 8.0mm
KM20-10 10.0mm
KM20-12 12.0mm
KM20-16 16.0mm
3/4” KM COLLET (METRIC)
Part Number SizeKM3/4-4 4mm
KM3/4-6 6mm
KM3/4-8 8mm
KM3/4-10 10mm
KM3/4-12 12mm
KM3/4-16 16mm
16mm KM COLLET (INCH)
Part Number SizeKM16-1/8 1/8”
KM16-3/16 3/16”
KM16-1/4 1/4”
KM16-5/16 5/16”
KM16-3/8 3/8”
KM16-7/16 7/16”
KM16-1/2 1/2”
16mm KM COLLET (METRIC)
Part Number Size
KM16-3 3.0mm
KM16-4 4.0mm
KM16-6 6.0mm
KM16-8 8.0mm
KM16-10 10.0mm
KM16-12 12.0mm
KM16-16 16.0mm
81
82
TQW Torque Wrenches
Collet Number Part NumberAttachments (Type and Size) Torque Range Torque Wrench
Description mm Inch lbs Nm Part Number DescriptionER8 TQW-ER08 Blank Special Attachment - Call 4 6
TQW-02514X18,25ft.lbsER11 TQW-ER11(17) Hex/OE 17 0.67 11 15
ER16 TQW-ER16(32)
Hook
32 [+/-5mm] 1.25 40 54
TQW-15014X18,
150ft.lbs
ER20 TQW-ER20(32) 32 [+/-5mm] 1.25 60 81
ER25 TQW-ER25(43) 43 [+/-5mm] 1.69 75 102
ER32 TQW-ER32(50) 50 [+/-5mm] 1.96 100 136
ER40 TQW-ER40(63) 63 [+/-5mm] 2.48 125 169
SK6 TQW-SK06(18)Hex/OE
18 0.71 14 19 TQW-025 14X18, 25ft.lbsSK10 TQW-SK10(1) 25.4 1.00 33-34 45-46
TQW-15014X18,
150ft.lbsSK16 TQW-SK16(43)
Hook43 [+/-5mm] 1.69 55-62 74-84
SK25 TQW-SK25(60) 60 [+/-5mm] 2.36 66-73 90-99
TG75 TQW-TG075(50)Hook
50 [+/-5mm] 1.96 55 75
TQW-15014X18,
150ft.lbsTG100 TQW-TG100(63) 63 [+/-5mm] 2.48 75 102
TG150 TQW-TG150(82) 82 [+/-5mm] 3.22 100 136
Pull Stud - 13mm TQW-PS(13)
Hex/OE
13 0.51 14 ~ 18 19 to 25 TQW-025 14X18, 25ft.lbsPull Stud - 3/4” (19mm) TQW-PS(19) 19 0.75 44 ~ 59 60 to 80
TQW-15014X18,
150ft.lbsPull Stud - 30mm TQW-PS(30) 30 1.18 147 ~ 185 200 to 250
Pull Stud - 1/1/4” TQW-PS(32) 31.75 1.25 147 ~ 185 200 to 250
Milling Chuck - 3/4” TQW-C3/4(50)Hook
50 [+/-5mm] 1.96 19 to 24 26-32
TQW-15014X18,
150ft.lbsMilling Chuck - 1” TQW-C1(60) 60 [+/-5mm] 2.36 27 to 31 36-42
Milling Chuck - 1.1/4” TQW-C1.1/4(72) 72 [+/-5mm] 2.83 48 to 59 65-80
CAPTO C3 TQW-CAPTO3(8)Hex
8 0.31 26 35
TQW-15014X18,
150ft.lbsCAPTO C4 TQW-CAPTO4(10) 10 0.39 37 50
CAPTO C5 TQW-CAPTO5(12) 12 0.47 52 70
The TQW Torque Wrench is very accurate and easy-to-use, guaranteeing maximum accuracy and preventing tool overtightening or breakage.
• Variable torque adjustable wrench • Robust and durable • Ergonomic grip • Easy to read inch and metric scale • Strong steel shaft is highly corrosion resistant • Easy to set up and operation:
A. Set wrench to desired torque setting B. Insert attachment C. Torque down on collet nut until it clicks in place
A wide selection of attachments are available: ER, SK, TG, Pull Stud, Milling Chuck, CAPTO
A Lock & Unlock collar securely locks the preset torque and prevents inadvertent adjustment.
Handle is shaped to provide a firm and ergonomic grip.
Design and Construction
83
Wrench Instructions, Warranty and Repair Services
Wrench Instructions
After securing spindle wrench in position, apply collet nut wrench onto collet nut.
While holding the spindle wrench firmly, turn the collet nut wrench clockwise to tighten.
Insert spindle wrench behind collet nut. Align spindle wrench with the wrench flats on the spindle.
Service and SupportLyndex-Nikken is dedicated to providing not only the highest
quality of equipment, but also the highest quality of service
and customer care. With over 60 years of experience, our
service engineers are looking forward to supporting your
needs beyond your expectations.
We fully stock all internal components to provide an expedited
and cost-effective maintenance program and rebuild package
for your live tooling. Managing a maintenance schedule for all
your machine tool accessory components can be challenging,
so we’ll be glad to remind you when the time comes.
Furthermore, to prevent an interruption in your production
schedule, for certain models we can offer a “loaner” live tool
while your live tool is under repair.
Warranty:
1 year warranty for internal components
2 year manufacturer warranty on external body
For any service request or inquiry, please contact our service
department: (847) 367-4800
1
2
3
84
5AX-201
U.S. Patent 5385424 (Brake System)CNC Rotary TablesWe offer a complete line of extremely accurate Nikken Rotary Tables. Featuring patented hardened assemblies, they retain their precision for years. Please call Lyndex-Nikken for more information: (847) 367-4800.
Installation ServiceLyndex-Nikken regional managers will assist you with product selection, integration and installation, guaranteeing complete customer satisfaction. Installation service includes drive, cable, table installation, parameter changes and documentation. Call Lyndex-Nikken for more information: (847) 367-4800.
Angle Heads
Our large range of Angle Heads are designed to easily and effectively upgrade your machine tool capabilities by eliminating additional set ups.
Units are equipped with 4340 ground gear and ground shaft components, high precision spindle bearings (P4 quality) and cast iron bodies for vibration dampening. Each tool also features high torque capabilities for aggressive milling and drilling.
Visit www.lyndexnikken.com to learn more about our complete line of Angle Heads, or call (847) 367-4800.
Lyndex-Nikken advanced products are innovatively designed to tackle the most complex and demanding applications. They guarantee a runout within 3 micron at 4 times the diameter beyond collet nut.
All-Precision ToolholdersWorm Wheel System
Accessories
85
Lyndex-Nikken website:
Be sure to check out our website
www.lyndexnikken.com
to find out more about our products,
services and all we have to offer! This
customer-friendly site provides a
complete overview of our product line,
and features technical data, videos,
CAD drawings, catalogs and more.
www.lyndexnikken.com1468 Armour Boulevard
Mundelein, IL 60060E-mail: [email protected]
Phone: (847) 367-4800Fax: (847) 367-4815
CAT2017-MORI-LT