Post on 12-May-2018
Technical Specifications05/2013
GE Oil & Gas
Masoneilan* 80000 SeriesThree-Way Control Valves Combining and Diverting Service
2 | GE Oil & Gas
CH80000 - 80000 Series Three-Way Control Valves | 3
Table of Contents
The 80000 Series is a heavy duty three-way control valve designed for either
combining or diverting service. Standard features include:
Heavy GuidingConstruction of the Masoneilan 80000 Series includes top guiding in the plug, as well as guiding within the seat ring locations provid-ing an extremely well supported and stable design.
High Capacity Large flow galleries in the 80000 Series provide high capacity designs with low pressure recoveries. High critical flow factors are attained in both combining and diverting configurations.
Flow StabilityThe 80000 Series is a dual seated design with flow tending to open the valve at both ports. This provides inherent dynamic stable resulting in excellent throttling control performance.
Wide Operating RangeDesigns are available in various sizes and can be configured to operate within an extremely wide temperature range. This is accomplished through use of high performance materials and design configurations.
Reduced EmissionsThe 80000 Series can be supplied with the Masoneilan LE Packing design to provide low emissions performance meeting various environmental regulations worldwide.
NACE ComplianceConstruction for Sour Service Applications in accordance with NACE standard MR 0103 is readily available. Applications requir-ing compliance to MR 0175, 2003 Rev or ISO 15156 can also be provided.
Features
Features ....................................................................................................................3
Numbering System ..............................................................................................4
Ratings/Connections ..........................................................................................4
General Data ...........................................................................................................5
Temperature Range/Seat Leakage ...............................................................6
Flow Direction and Application .......................................................................7
CV and FL Vesus Travel.........................................................................................7
CV and Flow Dir .......................................................................................................8
Materials of Construction ..................................................................................9
Valve Dimensions ............................................................................................... 16
Valve Weights ...................................................................................................... 20
Actuator Dimensions & Weights ................................................................. 21
Accessories ........................................................................................................... 23
Sales Offices .......................................................................................Back Cover
4 | GE Oil & Gas
Numbering System
Ratings/Connections Flanged n Butt Weld ∆ RT Joint l Threaded m Socket Weld
Valve Sizes ASME Class
inches mm 150 300 600
.75, 1, 1.5, 2 20, 25, 40, 50 l ∆ m l ∆ m l ∆ m
3 through 12 80 through 300 ∆ ∆ ∆1) .75” & 1” (20mm & 25mm) sizes not available in 80386 version - Diverting Design Utilize combining
design and consult factory for details.2) Welded end connections, other flanged configurations, and ASME ratings above 600 Class are
available upon request. Consult factory for details.
—1st 2nd 1st 2nd 3rd 4th 5th 6th
8 8 0 3 8
Actuator Type
87 Spring Diaphragm Air to Extend
88 Spring Diaphragm Air to Retract
Body Series
80
Control Characteristics
8. Linear Ported
Seat Type
5. Combing Design
5. Diverting Design
Plug Type
3. Top and Port Guided
Optional Configuration
EB Extension Bonnet
—
CH80000 - 80000 Series Three-Way Control Valves | 5
General DataBody Type: 3-way Flow Direction: Flow to open (both ports) CV Ratio: 50:1 Materials: Carbon steel Stainless steel Chrome-molybdenum steel Others
Bonnet Type: Bolted Packing Box: Bolted Optional: Extension Materials: Carbon steel Stainless steel Chrome-molybdenum steel Others
Trim Type: 385 - combining 386 - diverting
Flow Characteristics Linear Full capacity only ActuatorActuator Type: Spring diaphragm Direct, air to extend Reverse, air to retract
6 | GE Oil & Gas
Value Size (1)Body
RatingBody & Bonnet
Material
Temperature Ranges (1) Seat LeakageIEC 60534-4
and ANSI/FCI70.2 Class(3)
Standard Bonnet Extension Bonnet
inch mm Min. Max. Min. Max.
0.75 to 12
20 to
300
ASMEClass 150to 600 (PN10 to 100)
CarbonSteel
-4°F(-20°C)
+450°F(2)
(+232°C) -4°F
(-20°C)+800°F
(+427°C)
II, III,or IV
StainlessSteel
-20°F(-29°C)
+450°F(2)
(+232°C)-148°F
(-100°C)+800°F(+427°C)
Chrome-Moly32°F(0°C)
+450°F(2)
(+232°C)1100°F (594°C)
32°F(0°C)
NACE -4°F(-20°C)
+450°F(2)
(+232°C)
1) .75” & 1” (20 & 25mm) sizes are not available in the 80386 diverting configuration. Utilize combining version 80385 and consult factory for details.
2) Maximum temperature shown is with PTFE and LE packing. Extended max. operating temperature of 800°F (427°C) allowable with Graphite packing.
3) Class II shutoff is standard leakage rating. Class III and IV can be provided depending on application service conditions. Consult with factory on Class III and IV applications and requirements.
4) LE Packing for low emissions applications is limited to maximum pressure and temperature as shown in chart below.
Temperature Range/Seat Leakage
Pressure and Temperature Rating of LE Packing(4)
Flu
id P
ress
ure
PS
I (B
ar)
Fluid Temperature °F (°C)
0 50 100 150 200 250 300 350 400 450 500 (10) (38) (66) (93) (121) (149) (177) (204) (232) (260)
1600(112)
1400(98)
1200(84)
1000(70)
800(56)
600(42)
400(28)
200(14)
0
CH80000 - 80000 Series Three-Way Control Valves | 7
Percent of Travel 10 20 30 40 50 60 70 80 90 100
FL 0.90 0.91 0.91 0.92 0.92 0.92 0.91 0.91 0.90 0.90
Value Size ASME Rating
Orifice Diameter Travel
Rated CV
inch mm inch mm inch mm
75 20
150 to 600
.88 22.3 .05 12.7 0.6 1.2 1.8 2.4 3 3.6 4.2 4.8 5.4 6
1 25 1.06 26.9 .05 12.7 0.9 1.8 2.7 3.6 4.5 5.4 6.3 7.2 8.1 9
1.5 40 1.5 38.1 .08 20.3 2.1 4.2 6.3 8.4 10.5 12.6 14.7 16.8 18.9 21
2 50 2.00 50.8 .08 20.3 3.6 7.2 10.8 14.4 18 21.6 25.2 28.8 32.4 36
3 80 2.62 66.5 1.5 38.1 7.5 15 22.5 30 37.5 45 52.5 60 67.5 75
4 100 3.50 88.9 1.5 38.1 12.4 24.8 37.2 49.6 62 74.4 86.8 99.2 112 124
6 150 5.25 133 2.0 50.8 27 54 81 108 135 162 189 216 243 270
8 200 7.00 178 2.5 63.5 48 96 144 192 240 288 336 384 432 480
10 250 8.75 22 2.5 63.5 75 150 225 300 375 450 525 600 675 750
12(1) 300 10.5 267 3.5 88.9 108 216 324 432 540 648 756 864 972 1080
1) Use spring-diaphragm actuator Model 37/38 for 12” (300 mm) valve size.
Valve Model Type of ServiceValve Size Flow Direction
(Both Ports)inches mm
80385 Combining .75 to 12 20 to 300 FTO
80385* Diverting .75 & 1 20 & 25 FTC
80386 Diverting 1.5 to 12 40 to 300 FTO
* .75” & 1” (20 & 25mm) sizes are not available in the 80386 diverting configuration.Utilize combining version 80385 and consult factory for details.
CV and FL versus Travel
Flow Direction & Application
Direction: FLOW-TO-OPEN (FTO)Flow Characteristic: LINEAR
8 | GE Oil & Gas
80385 Combining
C = Common L = Lower U = Upper
80386 Diverting
CV and Flow Direction
Body Ratings: ANSI Class 150 through 600 (PN 10 to 100)Sizes: *.75” through 12” (20mm through 300mm)Flow Direction: flow to open (both ports)Flow Characteristic: linear
Value Size* Percent of Plug Travel
inches mmPlug Up
0% 10% 20% 30% 40% 50% 60% 70% 80% 90%Plug Down 100%
.75 20 0 6 0.6 5.4 1.2 4.8 1.8 4.2 2.4 3.6 3 3 3.6 2.4 4.2 1.8 4.8 1.2 5.4 0.6 6 0
1 25 0 9 0.9 8.1 1.8 7.2 2.7 6.3 3.6 5.4 4.5 4.5 5.4 3.6 6.3 2.7 7.2 1.8 8.1 0.9 9 0
1.5 40 0 21 2.1 18.9 4.2 16.8 6.3 14.7 8.4 12.6 10.5 10.5 12.6 8.4 14.7 6.3 16.8 4.2 18.9 2.1 21 0
2 50 0 36 3.6 32.4 7.2 28.8 10.8 25.2 14.4 21.6 18.0 18.0 21.6 14.4 25.5 10.8 28.8 7.2 32.4 3.6 36 0
3 80 0 75 7.5 67.5 15 60 22.5 52.5 30 45 37.5 37.5 45 30 52.5 22.5 60 15 67.5 7.5 75 0
4 100 0 124 12.4 111.6 24.8 99.2 37.2 86.8 49.6 74.4 62 62 74.4 49.6 86.8 37.2 99.2 24.8 111.6 12.4 124 0
6 150 0 270 27 243 54 216 81 189 108 162 135 135 162 108 189 81 216 54 243 27 270 0
8 200 0 480 48 432 96 384 144 336 192 288 240 240 288 192 336 144 384 96 432 48 480 0
10 250 0 750 75 675 150 600 225 525 300 450 375 375 450 300 525 225 600 150 675 75 750 0
12 300 0 1080 108 972 216 864 324 756 432 648 540 540 648 432 756 324 864 216 972 108 1080 0
* 1” (25mm) size not available in 80386 version - Diverting Design. Utilize combining design and consult factory for details.
80385 U to C L to C
80386 U to C L to C
0% - Plug in Up Position100% - Plug in Down Position
CH80000 - 80000 Series Three-Way Control Valves | 9
80385 Combining 80386 Diverting
Materials of Construction
15
4 3 2
12
19
17
18
7
13
14
9
16
15
111213
9C9B9A 9D
11
8
6
15
16
9
14
13
7
18
17
5
4 3 2
10
111213
1
12
19
11
8
6
10
10 | GE Oil & Gas
Materials of Construction
Ref. No.Temperature Range -4°F 650°F 850°F
Description Materials
1 Plug Stem 316 St. St. ASTM 479 TY 316
2 Packing Flange Nut St. St. ASTM A194 GR 8
3 Packing Flange Zinc Dichromate Carbon Steel ASTM A105
4 Packing Flange Stud 304 St. St. ASTM A193 GR B8
5 Drive Nut Carbon Steel SAE 1117 or ASTM A216 GR WCC
6 Valve Bonnet Carbon Steel ASTM A216 Grade WCC or ASTM A105
7 Valve Body Carbon Steel ASTM A216 Grade WCC
8 Plug Pin 316 St. St. ASTM 479 TY 316
9
Plug316 St. St. ASTM 479 TY 316 316 St. St. with Hardfaced
Seat and Guide316 St.St.with Hardfaced Seat
9A - Upper Skirt(1)316 St. St. ASTM 479 TY 316 316 St. St. with
Hardfaced Seat316 St.St.with Hardfaced Seat
9B - Plug Gasket(1) 316 St. St. ASTM 479 TY 316
9C - Lower Skirt(1)316 St. St. ASTM 479 TY 316 316 St. St. with
Hardfaced Seat316 St.St.with Hardfaced Seat
9D - Jam Nuts(1) ASTM A194 GR 8M
10 Lower Flange Carbon Steel ASTM A216 Grade WCC or ASTM A105
11 Body Stud Nut Carbon Steel ASTM A194 GR 2H
12 Body Stud Alloy Steel ASTM A193 GR B7
13 Body Gasket 316L St. St. w/Flexible Graphite Filler (Spiral Wound)
14 Guide Bushing 440C St. St. ASTM A276 TY 440C Stellite or Equivalent 6 UNS 30006(2)
15 Lower Seat Ring316 St. St. ASTM 479 TY 316 316 St. St. with
Hardfaced Seat316 St.St. with Hardfaced Seat
16 Upper Seat Ring316 St. St. ASTM 479 TY 316 316 St. St. with
Hardfaced Seat316 St.St. with Hardfaced Seat
18 Lantern Ring (Optional) Austenitic 300 Series Stainless Steel
19 Packing Follower Austenitic 300 Series Stainless Steel
Ref. No. Temperature Range -20°C 343°C 427°C
1) Separate plug components only required for Model 80386.
2) Hardfaced bushings and plug guiding surfaces are required for temperatures above 650°F (343°C).
Standard Carbon Steel VersionValve Sizes: 0.75” to 12” (20mm to 300mm)
Body Ratings: ASME Class 150 to 600
CH80000 - 80000 Series Three-Way Control Valves | 11
Materials of Construction
Ref. No.Temperature Range -148°F -20°F 650°F 850°F
Description Materials
1 Plug Stem 316 St. St. ASTM 479 TY 316
2 Packing Flange Nut St. St. ASTM A194 GR 8
3 Packing Flange Zinc Dichromate Carbon Steel ASTM A105
4 Packing Flange Stud 304 St. St. ASTM A193 GR B8
5 Drive Nut Carbon Steel SAE 1117 or ASTM A216 GR WCC
6
Valve BonnetPlain Version 316 Stainless Steel ASTM A351 Grade CF8M or ASTM A182 Grade F316
Valve BonnetExtended Version 316 Stainless Steel ASTM A351 Grade CF8M or ASTM A182 Grade F316
7 Valve Body 316 Stainless Steel ASTM A351 Grade CF8M
8 Plug Pin 316 St. St. ASTM 479 TY 316
9
Plug316 St. St. ASTM 479 TY 316 316 St. St. with Hardfaced
Seat and Guide316 St.St.with Hardfaced Seat
9A - Upper Skirt(1)316 St. St. ASTM 479 TY 316 316 St. St. with
Hardfaced Seat316 St.St.with Hardfaced Seat
9B - Plug Gasket(1) 316 St. St. ASTM 479 TY 316
9C - Lower Skirt(1)316 St. St. ASTM 479 TY 316 316 St. St. with
Hardfaced Seat316 St.St.with Hardfaced Seat
9D - Jam Nuts(1) ASTM A194 GR 8M
10 Lower Flange 316 Stainless Steel ASTM A351 Grade CF8M or ASTM A182 Grade F316
11 Body Stud Nut
Carbon Steel ASTM A194 GR 2HZinc Dichromate Plating
C. S. ASTM A194 GR 2H(No Zinc)
ASTM A194 Gr. 8
12 Body StudAlloy Steel ASTM A193 GR B7Zinc Dichromate Plating
Alloy Steel ASTM A193GR B7
ASTM A193 Gr. B8(2)
13 Body Gasket 316L St. St. w/Flexible Graphite Filler (Spiral Wound)
14 Guide Bushing Stellite or Equivalent 6(3)
15 Lower Seat Ring316 St. St. ASTM 479 TY 316 316 St. St. with
Hardfaced Seat316 St.St. with Hardfaced Seat
16 Upper Seat Ring316 St. St. ASTM 479 TY 316 316 St. St. with
Hardfaced Seat316 St.St. with Hardfaced Seat
18 Lantern Ring (Optional) Austenitic 300 Series Stainless Steel
19 Packing Follower Austenitic 300 Series Stainless Steel
Ref. No. Temperature Range -100°C -29°C 343°C 427°C
1) Separate plug components only required for Model 80386.
2) ASTM A453 Gr. 660 Body Studs may be required for low temperature applications or for corrosion resistance requirements.
3) Solid Stellite or Equivalent bushings are tack welded in bonnet and lower flange for applications above 650°F (343°C) to account for thermal expansion.
Standard Carbon Steel VersionValve Sizes: 0.75” to 12” (20mm to 300mm)
Body Ratings: ASME Class 150 to 600
12 | GE Oil & Gas
Materials of Construction
Ref. No.Temperature Range -32°F 650°F 800°F
Description Materials
1 Plug Stem 316 St. St. ASTM 479 TY 316
2 Packing Flange Nut St. St. ASTM A194 GR 8
3 Packing Flange Zinc Dichromate Carbon Steel ASTM A105
4 Packing Flange Stud 304 St. St. ASTM A193 GR B8
5 Drive Nut Carbon Steel SAE 1117 or ASTM A216 GR WCC
6 Valve Bonnet Chrome-Molybdenum Steel ASTM A217 Grade WC9
7 Valve Body Chrome-Molybdenum Steel ASTM A217 Grade WC9
8 Plug Pin 316 St. St. ASTM 479 TY 316
9
Plug316 St. St. ASTM 479 TY 316 316 St. St. with Hardfaced
Seat and Guide316 St.St.with Hardfaced Seat
9A - Upper Skirt(1)316 St. St. ASTM 479 TY 316 316 St. St. with
Hardfaced Seat316 St. St. with Hardfaced Seat
9B - Plug Gasket(1) 316 St. St. ASTM 479 TY 316
9C - Lower Skirt(1)316 St. St. ASTM 479 TY 316 316 St. St. with
Hardfaced Seat316 St.St.with Hardfaced Seat
9D - Jam Nuts(1) ASTM A194 GR 8M
10 Lower Flange Chrome-Molybdenum Steel ASTM A217 Grade WC9
11 Body Stud Nut Carbon Steel ASTM A194 GR 2H
12 Body Stud Alloy Steel ASTM A193 GR B7
13 Body Gasket 316L St. St. w/Flexible Graphite Filler (Spiral Wound)
14 Guide Bushing 440C St. St. ASTM A276 TY 440C Stellite or Equivalent 6 UNS 30006(2)
15 Lower Seat Ring316 St. St. ASTM 479 TY 316 316 St. St. with
Hardfaced Seat316 St.St. with Hardfaced Seat
16 Upper Seat Ring316 St. St. ASTM 479 TY 316 316 St. St. with
Hardfaced Seat316 St. St. with Hardfaced Seat
18 Lantern Ring (Optional) Austenitic 300 Series Stainless Steel
19 Packing Follower Austenitic 300 Series Stainless Steel
Ref. No. Temperature Range 0°C 343°C 427°C
1) Separate plug components only required for Model 80386.
2) Hardfaced bushings and plug guiding surfaces are required for temperatures above 650°F (343°C).
Standard Chrome Moly VersionValve Sizes: 0.75” to 12” (20mm to 300mm)
Body Ratings: ASME Class 150 to 600
CH80000 - 80000 Series Three-Way Control Valves | 13
Materials of Construction
Ref. No.Temperature Range -20°F 450°F 800°F
Description Materials
17
PackingStandardBonnet
PTFE Packing
LE® Packing
Flexible Graphite Packing
PackingStandardBonnet
PTFE Packing
LE® Packing
Flexible Graphite Packing
Ref. No. Temperature Range -29°C 232°C 427°C
Standard Packing OptionsValve Sizes: 0.75” to 12” (20mm to 300mm)
Body Ratings: ASME Class 150 to 600
14 | GE Oil & Gas
Materials of Construction
Ref. No.Temperature Range -20°F 450°F
Description Standard Operating Materials(1)
1 Plug Stem316 St. St. ASTM A479 TY 316 (HRC 22 Max.)
ASTM A638 Gr 660(2)
2 Packing Flange Nut304 St. St. ASTM A194 Gr 8(3) (non exposed)
Alloy Steel ASTM A194 Gr 8A(4) (exposed)
3 Packing Flange Zinc Dichromate Carbon Steel ASTM A105
4 Packing Flange Stud 304 St. St. ASTM A193 GR B8 (exposed and non exposed)
5 Drive NutCarbon Steel SAE 1117(3)
Carbon Steel ASTM A105 or SAE 1010-1025(4)
6 Valve Bonnet
Carbon Steel ASTM A216 Grade WCC (HRC 22 Max.)
Carbon Steel ASTM A105 (HRC 22 Max.)
316 St. St. ASTM A351 Gr CF8M (HRC 22 Max.)
7 Valve BodyCarbon Steel ASTM A216 Grade WCC (HRC 22 Max.)
316 St. St. ASTM A351 Gr CF8M (HRC 22 Max.)
8 Plug Pin 316 St. St. ASTM A479 TY 316 (HRC 22 Max.)
9
Plug316 St. St. ASTM A479 TY 316 (HRC 22 Max.)
316 St. St. ASTM A479 TY 316 with Hardfaced Seat (HRC 22 Max.)
9A - Upper Skirt(6)316 St. St. ASTM A479 TY 316 (HRC 22 Max.)
316 St. St. ASTM A479 TY 316 with Hardfaced Seat (HRC 22 Max.)
9B - Plug Gasket(6) 316 St. St. ASTM A479 TY 316 (HRC 22 Max.)
9C - Lower Skirt(6)316 St. St. ASTM A479 TY 316 (HRC 22 Max.)
316 St. St. ASTM A479 TY 316 with Hardfaced Seat (HRC 22 Max.)
9D - Jam Nuts(6) ASTM A194 Gr. 8M
10 Lower Flange
Carbon Steel ASTM A216 Grade WCC (HRC 22 Max.)
Carbon Steel ASTM A105 (HRC 22 Max.)
316 St. St. ASTM A351 Gr CF8M (HRC 22 Max.)
ASTM A194 GR 2H Zinc Plating(3)(5) (non exposed)
ASTM A194 Gr 2HM Zinc Plating(4)(5) (exposed)
11 Body Stud NutASTM A194 GR 2H(3) (non exposed)
ASTM A194 Gr 2HM(4) (exposed)
Ref. No. Temperature Range -29°C 232°C
Standard NACE VersionValve Sizes: 0.75” to 12” (20mm to 300mm)
Body Ratings: ASME Class 150 to 600
CH80000 - 80000 Series Three-Way Control Valves | 15
Materials of Construction
Ref. No.Temperature Range -20°F 450°F
Description Standard Operating Materials(1)
12 Body Stud
ASTM A193 GR B7(3) (non exposed)
ASTM A193 Gr B7M(4) (exposed)
ASTM A193 GR B7 Zinc Plating(3)(5) (non exposed)
ASTM A193 Gr B7M Zinc Plating(4)(5) (exposed)
13 Body Gasket 316L St. St. w/Flexible Graphite Filler (Spiral Wound)
14 Guide Bushing Stellite or Equivalent 6 UNS 30006
15 Lower Seat Ring316 St. St. ASTM A479 TY 316 (HRC 22 Max.)
316 St. St. ASTM A479 TY 316 with Hardfaced Seat (HRC 22 Max.)
16 Upper Seat Ring316 St. St. ASTM A479 TY 316 (HRC 22 Max.)
316 St. St. ASTM A479 TY 316 with Hardfaced Seat (HRC 22 Max.)
17 Packing PTFE (Teflon)
18 Lantern Ring (Optional) 304 St. St. ASTM A479 TY 304
19 Packing Follower 304 St. St. ASTM A479 TY 304
Ref. No. Temperature Range -29°C 232°C
1) Materials and processes in accordance with the requirements of NACE specification MR0103, 2003. Applications requiring compliance to MR0175, 2003 Rev. or ISO 15156 requires factory review.
2) ASTM A638 Gr. 660 Stem option will be substituted in applications as required based on operating pressure conditions.
3) Materials designated for these parts conform to NACE Class III (unexposed) bolting requirements.
4) Materials designated for these parts conform to NACE Class I or Class II (exposed) bolting requirements.
5) Zinc plating is mandatory for St. Steel construction only.
6) Separate plug components only required for Model 80386.
Standard NACE VersionValve Sizes: 0.75” to 12” (20mm to 300mm)
Body Ratings: ASME Class 150 to 600
16 | GE Oil & Gas
Valve Dimensions
A
B
C
D
E
F
Valve Size ASME Class 150 and equivalent PN
ASME Class 300 and equivalent PN
ASME Class 600 and equivalent PN
ANSI Class 150-600 and
equivalent PN
inches mmRF RTJ RF RTJ RF RTJ Threaded &
Socket Weld
A B A B A B A B A B A B A B
.75 20 7.24 5.51 7.76 5.51 7.64 5.51 8.11 5.51 8.11 5.51 8.11 5.51 5.98 5.55
1 25 7.24 5.51 7.76 5.51 7.76 5.51 8.27 5.51 8.27 5.51 8.27 5.51 5.98 5.55
1.5 40 8.74 6.26 9.25 6.26 9.25 6.26 9.76 6.26 9.88 6.26 9.88 6.26 7.99 6.26
2 50 10.00 6.61 10.51 6.61 10.51 6.61 11.10 6.61 11.26 6.61 11.38 6.61 9.25 6.61
3 80 11.73 7.99 12.24 8.62 12.52 7.99 13.11 8.62 13.27 8.62 13.39 8.62
4 100 13.90 9.02 14.37 10.12 14.49 9.02 15.12 10.12 15.51 10.12 15.63 10.12
6 150 17.76 11.38 18.11 11.69 18.62 11.38 19.25 11.69 20.00 12.36 20.12 12.36
8 200 21.38 13.27 21.89 13.54 22.36 13.27 22.99 13.54 24.02 14.25 24.13 4.25
10 250 24.61 15.39 24.33 15.71 26.02 15.39 26.65 16.97 27.76 17.60 27.87 17.60
12 300 28.78 17.91 29.25 17.91 30.28 17.91 30.87 17.91 32.01 21.06 32.13 21.06
Valve Size ASME Class 150 – 600 and equivalent PN
inches mm C (Std. Bonnet) C (EB Bonnet) F
.75 20 5.12 9.17
See Note 1
1 25 5.12 9.17
1.5 40 5.24 9.88
2 50 6.26 10.47
3 80 7.99 11.81
4 100 8.39 12.64
6 150 10.98 16.42
8 200 12.64 17.95
10 250 13.11 19.29
12 300 16.73 22.91
1) For Model 80385 - Dimension F is equal to one-half dimension A.
80385 Series Dimensions (inches)
CH80000 - 80000 Series Three-Way Control Valves | 17
Valve Size ASME Class 150 and equivalent PN
ASME Class 300 and equivalent PN
ASME Class 600 and equivalent PN
ANSI Class 150-600 and
equivalent PN
mm inchesRF RTJ RF RTJ RF RTJ Threaded &
Socket Weld
A B A B A B A B A B A B A B
20 .75 184 140 197 140 194 140 206 140 206 140 206 140 152 141
25 1 184 140 197 140 197 140 210 140 210 140 210 140 152 141
40 1.5 222 159 235 159 235 159 248 159 251 159 251 159 203 159
50 2 254 168 267 168 267 168 282 168 286 168 289 168 235 168
80 3 298 203 311 219 318 203 333 219 337 219 340 219
100 4 353 229 365 257 368 229 384 257 394 257 397 257
150 6 451 289 460 297 473 289 489 297 508 314 511 314
200 8 543 337 556 344 568 337 584 344 610 362 613 362
250 10 625 391 618 399 661 391 677 431 705 447 708 447
300 12 731 455 743 455 769 455 784 455 813 535 816 535
Valve Size ASME Class 150 – 600 and equivalent PN
mm inches C (Std. Bonnet) C (EB Bonnet) F
20 .75 130 233
See Note 1
25 1 130 233
40 1.5 133 251
50 2 159 266
80 3 203 300
100 4 213 312
150 6 279 417
200 8 321 456
250 10 333 490
300 12 425 582
1) For Model 80385 - Dimension F is equal to one-half dimension A.
80385 Series Dimensions (mm)
18 | GE Oil & Gas
Valve Dimensions
Valve Size ASME Class 150 and equivalent PN
ASME Class 300 and equivalent PN
ASME Class 600 and equivalent PN
ANSI Class 150-600 and
equivalent PN
inches mmRF RTJ RF RTJ RF RTJ Threaded &
Socket Weld
A B A B A B A B A B A B A B
.75 20 7.24 5.51 7.76 5.51 7.64 5.51 8.11 5.51 8.11 5.51 8.11 5.51 5.98 5.55
1 25 7.24 5.51 7.76 5.51 7.76 5.51 8.27 5.51 8.27 5.51 8.27 5.51 5.98 5.55
1.5 40 8.74 7.01 9.25 7.01 9.25 7.01 9.76 7.01 9.88 7.01 9.88 7.01 7.99 6.26
2 50 10.00 7.76 10.51 7.76 10.51 7.76 11.10 7.76 11.26 7.76 11.38 7.76 9.25 6.61
3 80 11.73 9.37 12.24 9.88 12.52 9.37 13.19 20.51 13.27 9.88 13.39 9.88
4 100 13.90 10.63 14.41 11.50 14.49 10.63 15.16 11.50 15.51 11.10 15.67 11.50
6 150 17.76 12.99 18.31 13.31 18.62 12.99 19.29 13.31 20.00 14.02 20.16 13.98
8 200 21.38 15.39 21.93 15.67 22.36 15.39 23.03 15.67 24.02 16.38 24.17 16.38
10 250 24.65 17.99 25.12 18.31 26.02 17.99 26.65 18.31 27.76 20.79 27.87 20.79
12 300 28.78 22.05 29.25 22.05 30.28 22.05 30.87 12.05 32.01 25.20 32.13 25.20
Valve Size ASME Class 150 and equivalent PN
ANSI Class 150-600 and equivalent
PN
ASME Class 150 and equivalent PN
ASME Class 300 and equivalent PN
ASME Class 600 and equivalent PN
inches mm
Std. Bonnet EB Bonnet Threaded &
Socket Weld RF RTJ RF RTJ RF RTJ
C C F F F F F F F
.75 20 5.12 9.17See Note 1
1 25 5.12 9.17
1.5 40 6.10 10.75 3.70 4.06 4.66 4.29 4.57 4.65 4.65
2 50 7.24 11.46 4.13 4.65 4.92 4.88 5.20 2.24 5.35
3 80 9.25 13.07 5.51 5.79 5.51 6.22 5.51 6.34
4 100 9.37 13.62 6.57 6.85 6.89 7.20 7.36 7.48
6 150 12.64 18.07 7.64 7.91 8.07 8.39 8.74 8.82
8 200 14.76 20.08 8.54 8.82 9.06 9.41 9.88 9.96
10 250 16.38 22.56 10.00 10.24 10.67 10.98 11.54 11.61
12 300 20.87 27.05 11.34 11.57 12.09 12.36 12.95 12.99
1) .75” & 1” (20 & 25mm) sizes are not available in the 80386 diverting configuration. Utilize combining version 80385 and consult factory for details.
80386 Series Dimensions (inches)
CH80000 - 80000 Series Three-Way Control Valves | 19
Valve Dimensions
Valve Size ASME Class 150 and equivalent PN
ASME Class 300 and equivalent PN
ASME Class 600 and equivalent PN
ANSI Class 150-600 and
equivalent PN
mm inchesRF RTJ RF RTJ RF RTJ Threaded &
Socket Weld
A B A B A B A B A B A B A B
20 0.75 184 140 197 140 194 140 206 140 206 140 206 140 152 141
25 1 184 140 197 140 197 140 210 140 210 140 210 140 152 141
40 1.5 222 178 235 178 235 178 248 178 251 178 251 178 203 159
50 2 254 197 267 197 267 197 282 197 286 197 289 197 235 168
80 3 298 238 311 251 318 238 335 521 337 251 340 251
100 4 353 270 366 292 368 270 385 292 394 282 398 292
150 6 451 330 465 338 473 330 490 338 508 356 512 355
200 8 543 391 557 398 568 391 585 398 610 416 614 416
250 10 626 457 638 465 661 457 677 465 705 528 708 528
300 12 731 560 743 560 769 560 784 560 813 640 816 640
Valve Size ASME Class 150 and equivalent PN
ANSI Class 150-600 and equivalent
PN
ASME Class 150 and equivalent PN
ASME Class 300 and equivalent PN
ASME Class 600 and equivalent PN
mm inches
Std. Bonnet EB Bonnet Threaded &
Socket Weld RF RTJ RF RTJ RF RTJ
C C F F F F F F F
20 0.75 130 233See Note 1
25 1 130 233
40 1.5 155 273 94 103 110 109 116 118 118
50 2 184 291 105 118 125 124 132 133 136
80 3 235 332 140 147 140 158 140 161
100 4 238 346 167 174 175 183 187 190
150 6 321 459 194 201 205 213 222 224
200 8 375 510 217 224 230 239 251 253
250 10 416 573 254 260 271 279 293 295
300 12 530 687 288 294 307 314 329 330
1) .75” & 1” (20 & 25mm) sizes are not available in the 80386 diverting configuration. Utilize combining version 80385 and consult factory for details.
80386 Series Dimensions (mm)
20 | GE Oil & Gas
Valve Weights
Valve Size ANSI Class 150-600 and equivalent PN
ASME Class 150 and equivalent PN
ASME Class 300 and equivalent PN
ASME Class 600 and equivalent PN
inches mm Threaded & Socket Weld Flanged
0.75 20 33 44 44 70
1 25 33 44 44 70
1.5 40 88 90 90 99
2 50 123 125 125 139
3 80 207 220 220 233
4 100 273 299 299 328
6 150 504 524 524 614
8 200 693 772 772 933
10 250 1351 1714 1714 2083
12 300 1683 2875 2875 3522
Valve Size ANSI Class 150-600 and equivalent PN
ASME Class 150 and equivalent PN
ASME Class 300 and equivalent PN
ASME Class 600 and equivalent PN
mm inches Threaded & Socket Weld Flanged
20 0.75 15 20 20 32
25 1 15 20 20 32
40 1.5 40 41 41 45
50 2 56 57 57 63
80 3 94 100 100 106
100 4 124 136 136 149
150 6 229 238 238 279
200 8 315 351 351 424
250 10 614 779 779 947
300 12 765 1307 1307 1601
Body Sub-Assembly with Standard Bonnet (lbs)
Body Sub-Assembly with Standard Bonnet (kg)
CH80000 - 80000 Series Three-Way Control Valves | 21
Actuator Dimensions and Weights (in./lbs)
Actuator SizeActuator Dimensions (inches) Weights (lbs.)
A B (Model 88) C D Standard w/ Handwheel
6 11.50 15.54 (17.52) 10.00 9.00 45 60
10 10 14.50 19.58 (21.54) 10.90 12.00 85
16 16 18.75 28.22 (30.79) 14.00 18.00 210
23 23 21.63 30.71 (33.27) 16.00 18.00 265
Actuator Removal Clearance = 6 inches
Size X Y
6 .19 9.75
10 .0 12.88
16 .13 18.50
23 .06 21.13
Size Model Overall Height B
6
87
19.45
10 25.43
16 36.42
23 38.84
6
88
19.16
10 25.06
16 35.48
23 38.65
Size Model Overall Height B
6
87
19.80
10 25.98
16 37.20
23 39.90
6
88
19.74
10 25.85
16 37.46
23 40.33
Size XX YY
6 1.25 9.13
10 0.88 12.00
16 1.38 16.75
23 1.38 19.00
Dimensions and Weights
Center of Gravity (inches)Without Handwheel
Limit Stops (inches)Up Stop
Down Stop
With Handwheel
YYD
C
XX
Shown with optional Handwheel
22 | GE Oil & Gas
Actuator Dimensions and Weights (mm/kg)
Actuator SizeActuator Dimensions (mm) Weights (kg)
A B (Model 88) C D Standard w/ Handwheel
6 302 395 (445) 254 229 20 27
10 373 497 (547) 277 305 39 48
16 476 717 (782) 356 457 95 111
23 549 780 (845) 406 457 120 145
Actuator Removal Clearance = 152 mm
Size X Y
6 5 248
10 0 327
16 3 470
23 2 537
Size Model Overall Height B
6
87
494
10 646
16 925
23 987
6
88
487
10 636
16 901
23 982
Size Model Overall Height B
6
87
503
10 660
16 945
23 1014
6
88
501
10 657
16 952
23 1024
Size XX YY
6 32 232
10 22 305
16 35 425
23 35 483
Dimensions and Weights
Center of Gravity (mm)Without Handwheel
Limit Stops (mm)Up Stop
Down Stop
With Handwheel
YYD
C
XX
Shown with optional Handwheel
CH80000 - 80000 Series Three-Way Control Valves | 23
AccessoriesOptions:• Extension Bonnets• Environmental Capabilities (LE Packing)• Lubricator & Isolation Valve• Other Flange Facings• Limit Stops• Body Drain Plug• Reducer and Nipple Connections• NACE Compliance• Custom Trim Materials• U.O.P. Trim Materials• Other Materials• Non-Destructive Examination• Oxygen Cleaning• Electric Actuators
For Accessories, consult GE.
* Trademark of General Electric Company
Other company names and product names used in this document are the registered trademarks
or trademarks of their respective owners.
© 2013 General Electric Company. All rights reserved.
BELGIUMPhone: +32-2-344-0970Fax: +32-2-344-1123
BRAZILPhone: +55-11-2146-3600Fax: +55-11-2146-3610
CHINAPhone: +86-10-8486-4515Fax: +86-10-8486-5305
FRANCE CourbevoiePhone: +33-1-4904-9000Fax: +33-1-4904-9010
GERMANY RatingenPhone: +49-2102-108-0Fax: +49-2102-108-111
INDIA MumbaiPhone: +91-22-8354790Fax: +91-22-8354791
New DelhiPhone: +91-11-2-6164175Fax: +91-11-5-1659635
ITALYPhone: +39-081-7892-111Fax: +39-081-7892-208
JAPAN ChibaPhone: +81-43-297-9222Fax: +81-43-299-1115
KOREAPhone: +82-2-2274-0748Fax: +82-2-2274-0794
MALAYSIAPhone: +60-3-2161-0322Fax: +60-3-2163-6312
MEXICOPhone: +52-5-310-9863Fax: +52-5-310-5584
THE NETHERLANDSPhone: +0031-15-3808666Fax: +0031-18-1641438
RUSSIAVeliky NovgorodPhone: +7-8162-55-7898Fax: +7-8162-55-7921
MoscowPhone: +7 495-585-1276Fax: +7 495-585-1279
SAUDI ARABIAPhone: +966-3-341-0278Fax: +966-3-341-7624
SINGAPOREPhone: +65-6861-6100Fax: +65-6861-7172
SOUTH AFRICAPhone: +27-11-452-1550Fax: +27-11-452-6542
SOUTH and CENTRALAMERICA and the CARIBBEAN Phone: +55-12-2134-1201Fax: +55-12-2134-1238
SPAINPhone: +34-93-652-6430Fax: +34-93-652-6444
UNITED ARAB EMIRATES Phone: +971-4-8991-777Fax: +971-4-8991-778
UNITED KINGDOM Wooburn GreenPhone: +44-1628-536300Fax: +44-1628-536319
UNITED STATES MassachusettsPhone: +1-508-586-4600Fax: +1-508-427-8971
Corpus Christi, TexasPhone: +1-361-881-8182Fax: +1-361-881-8246
Deer Park, TexasPhone: +1-281-884-1000Fax: +1-281-884-1010
Houston, TexasPhone: +1-281-671-1640Fax: +1-281-671-1735
DIRECT SALES OFFICE LOCATIONS
GEA20199 05/2013