Valvula 41000 Masoneilan
-
Upload
omar-rojas -
Category
Documents
-
view
578 -
download
21
description
Transcript of Valvula 41000 Masoneilan
-
Complete Line ofHeavy Duty,
Balanced, Cage Guided,Globe Valves
with Lo-dB andAnti-Cavitation
Capabilities
Masoneilan41005 Series Control Valves
Specification Data
CH3000
03/02
-
SD CH3000 - 03/0241005 Series2
Trade names noted throughout are for reference only. Masoneilanreserves the right to supply trade named material or its equivalent.
High Performance DesignMasoneilans 41005 Series heavy-duty globe control valvesare engineered to handle the most demanding process con-ditions and exceeds the capabilities of comparable designs.The balanced cage-guided construction of the 41005 Seriesprovides some key advantages versus typical unbalancedand/or contoured plug type designs:
Higher Flow Capacities Higher Pressure Drop Capabilities Tighter Shut-Off Ratings Reduced Actuator Size and Thrust Requirements Improved Stability with Larger Guide Areas Increased Low Noise and Anti-Cavitation Trim Options
Wide Application RangeMasoneilans 41005 Series control valves provide high flow capacities combined with low pressure recoveries asreflected by the high FL factors. This product line also provides efficient and dependable performance over a widerange of pressures and temperatures typical in critical service applications.
Maximum Reliability Specification and selection of the best solution for any application is simplified with the standard design optionsand materials available in the 41005 Series. Standardproduct construction and material combinations are basedon over 30 years of successful field experience in variousprocess industries.
Various Seal OptionsThe 41005 Series is available with a variety of seal designsand materials to meet a wide combination of temperatureand shut-off requirements.
Versatile Trim SolutionsVarious noise attenuation, anti-cavitation, and tight shut-offsolutions are available within the standard 41005 productenvelope. This includes the following trim options:
Single Stage Trim Provides excellent low noise performance on either gas or steam applications. Alsoprovides an effective anti-cavitation solution for liquid services.
Multi-Stage Trim Provides highly effective low noiseand anti-cavitation solutions for high-pressure ratioapplications.
Pilot Balanced Trim Provides unmatched tight shut-offperformance for high temperature applications.
Internal Diffuser Provides additional low noise and anti-cavitation benefits in flow-to-close (FTC) applications.
Engineered Solutions Special trim designs can alsobe provided for applications not covered by the standardtrim noted above.
NACE ComplianceThe 41005 Series is available for sour service applicationsusing design and construction methods in accordance withNACE Standard MR0175.
Table of Contents
Features
Features ........................................................................................................................................................................2Numbering System ......................................................................................................................................................3General Data ................................................................................................................................................................4Ratings/Connections ....................................................................................................................................................4Seal Type versus Temperature Range/Seat Leakage ..................................................................................................5Flow Direction ..............................................................................................................................................................5Cv and FL versus Travel ................................................................................................................................................6Body S/A Construction ................................................................................................................................................10Materials of Construction ............................................................................................................................................11Trim Types ..................................................................................................................................................................15Dimensions ................................................................................................................................................................16Weights ......................................................................................................................................................................23Accessories and Options ............................................................................................................................................25Sales Offices and Distribution Centers ........................................................................................................Back Cover
-
3DesignSeries
5
OptionalConfig.
A AngleBody
Actuator Type
Numbering System
Body Series Seal Type TrimType/Characteristic41 Cage
Guided,BalancedGlobe
0. Undefined 3. Pressure
EnergizedPTFE SealRing
4. Auxiliary Shut-offPlug (Pilot)
5. Metal Seal Ring6. PTFE Seal Ring9. Graphite Seal Ring
1st 2nd 5th
5
6th4th
0
3rd
0
2nd
1
1st
4
37 Spring Diaphragm : direct, air to close (fail open action)
38 Spring Diaphragm : reverse,air to open (fail to close)
84 Cylinder : spring return, direct, air to close, single or double-acting (fail open action)
85 Cylinder : spring return, reverse, air to open, single or double-acting (fail to close)
86 Cylinder : double-acting, without spring, air to open or air to close action
87 Spring Diaphragm : direct, air to close (fail open action)
88 Spring Diaphragm :reverse, air to open(fail close action)
0. Undefined1. Standard
Cage/Linear2. Standard
Cage/Equal %3. Lo-dB/Anti-Cav
Single Stage/Linear
4. Lo-dB/Anti-Cav Single Stage with Diffuser/Linear
5. Lo-dB Multi-Stage/Linear
6. VRT (stack) Type S/Linear
7. VRT (partial stack) Type S/Modified
8. VRT (cage) Type C/Linear
9. Anti-Cav Multi-Stage/ Linear
SD CH3000 - 03/0241005 Series
Engineered trim options are also available for high temperature and high pressure drop applications, including Multi-StageAnti-Cavitation Trim. Please consult factory for details.
-
ANSI Class 2500and equivalent PN
Lo-dB Multi-Stage Valve(41355, 41555, 41655, 41955)
flow direction : flow to opengas or steam only
CV ratio : 50:1 Trim
cage : multi-stage Lo-dBplug : pressure balanced cage guided
with various seal ring options Standard Flow Characteristic
standard trim : linear
Actuatortype : spring diaphragm
spring-return cylinder double-acting cylinder
handwheel : optional
Pressure DropRefer to PH3000 for 41005 Series Pressure Drop Tables
Standard Valve (41305, 41405, 41505, 41605 and 41905) Body
type : high-capacity globe or angleflow direction : see Flow Direction Table
Lo-dB trim : flow to open for gas or steamLo-dB trim with diffuser : flow to close for gas or steam
anti-cavitation trim : flow to closeCV ratio : 100:1 standard capacity trim
50:1 Lo-dB and reduced capacity trim
Bonnettype : stud bolted extension
Trim cage : cylindrical ported or Lo-dBplug : pressure balanced cage guided
with various seal ring options; pressure balanced cage guided, with spring loaded internal auxiliary tight shut-off plug
Standard Flow Characteristicsstandard trim : linear, equal percentage
Lo-dB trim : linearLo-dB trim with diffuser : linear
anti-cavitation trim : linear
General Data
SD CH3000 - 03/0241005 Series4
ANSI Class 150 to 1500and equivalent PN
Valve Sizeinch mm
Notes: 1. Angle Body Version is available in valve sizes 2" - 6" with ANSI ratings from Class 150 to Class 1500 and standard raised face end connections.2. Ex. 3x2 size = valve with 3" body x standard 2" trim.3. Consult Masoneilan for AFNOR and DIN connections.
Threaded Socket Weld Butt Weld RF & RTJ
= ANSI Class 2500 Ratings and 14", 18", 20" and 24" sizes are available. Please consult factory for details.
Ratings/Connections
2 50 3 to 8 80 to 200
10 to 16 250 to 4003x2 80x504x2 100x504x3 100x806x3 150x806x4 150x1008x4 200x1008x6 200x15010x6 250x15010x8 250x20012x8 300x20016x12 400x300
14,18,20,24 350,450,500,600
-
41915/41925FTO or FTC
41935FTO
41935FTC
41955FTO
41945FTC
Model Number 41305 41405 (1) 41505 41605 41905
PressureEnergized PTFE
Seal RingSeal Type
Auxiliary Pilot Plug with
Metal Seal RingMetal Seal Ring PTFE Seal Ring Graphite Seal Ring
41315/41325FTO or FTC(2)
Standard Trim41015/41025
41515/41525FTO or FTC
41615/41625FTO or FTC
41335FTO
Lo-dBSingle Stage
41035
41535FTO
41635FTO
41335FTC
Anti-CavitationSingle Stage
41035
41535FTC
41635FTC
41355FTO
Lo-dBMulti-Stage
41055
41555FTO
41655FTO
Notes: 1. Flow direction for Pilot Plug Seal configuration is always FTC.2. Seal ring must be installed in correct orientation relative to high pressure direction.3. Flow direction with Internal Diffuser is always FTC.
41345FTC
41545FTC
41645FTC
Lo-dB & Anti-CavitationSingle Stage withInternal Diffuser (3)
41045
41415/41425FTC
41435FTC
41435FTC
N/A
41445FTC
Seal Type versus Temperature Range/Seat Leakage
Notes: 1. See Materials of Construction Tables for other temperature limitations2. Maximum temperature limit for the 2" (50mm) size is +1050F (+566C).
Valve Valve Size Temperature Range(1) Seat Leakage per
Model Seal Type IEC 534-4 andinches mm Minimum Maximum ANSI / FCI 70.2 Class
2 - 16 50 - 400 -50F (-46C) +450F (+232C) IV (standard) V (optional)
2 - 4 50 - 100 -320F (-196C) +850F (+454C) IV (standard) 6 - 16 150 - 400 -320F (-196C) +1050F (+566C) V (optional)
2 - 4 50 - 100 -320F (-196C) +850F (+454C) II 6 - 16 150 - 400 -320F (-196C) +1050F (+566C) III2 - 16 50 - 400 -20F (-29C) +300F (+149C) IV2 - 4 50 - 100 -320F (-196C) +850F (+454C) III6 - 16 150 - 400 -320F (-196C) +850F (+454C) IV
5SD CH3000 - 03/0241005 Series
PressureEnergized PTFESeal Ring
Auxiliary PilotPlug with MetalSeal Ring
Metal Seal Ring
PTFE Seal Ring
Graphite Seal Ring
41305
41405
41505
41605
41905
(2)
(2)
Flow Direction
-
Cv and FL versus Travel
SD CH3000 - 03/0241005 Series6
Standard TrimModels 41315, 41415, 41515, 41615 and 41915 Flow Characteristic : LINEAR
Rated Cv
Notes: 1. Travel of 1.5 inches (38.1mm) for 41405.2. Ex. 3x2 size = valve with 3" body x standard 2" trim.
2 50 900 - 1500 1.84 46.7 0.8 20.31.4 2.7 4.2 6 8 10 12.5 14 15.5 16
2 4.9 8.3 13 19 25 30 35 38 402 50 150 - 600 2.7 5.1 7.9 11 15 19 23 26 29 30
3x2 80x50 150-1500 2.50 63.5 1.5 38.14x2 100x50 4 9 15 24 35 47 57 65 71 753 80 5 10 16 22 30 38 46 52 58 60
4x3 100x80 150 - 1500 3.50 88.9 2.0 50.86x3 150x80 8 19 31 50 73 96 118 135 147 1554 100 9 16 25 35 48 60 72 83 91 95
6x4 150x100 150 - 1500 4.38 111.3 2.0 50.88x4 200x100 12 29 48 77 113 149 182 209 228 2406 150 0.8(1) 20.3(1) 7 15 28 41 58 74 94 117 144 165
8x6 200x150 150 - 1500 5.12 130.0 10x6 250x150 2.0 50.8 20 52 92 148 204 260 308 348 376 400
8 200 1.5 38.1 17 37 71 104 145 187 237 295 361 41510x8 250x200 150 - 1500 6.50 165.112x8 300x200 2.5 63.5 32 83 147 237 326 416 493 557 602 640
10 250 150 - 1500 8.00 203.2 1.5 38.1 20 46 87 128 179 230 291 362 444 5103.0 76.2 50 130 230 370 510 650 770 870 940 1000
12 300150 - 1500 9.75 247.7
2.0 50.8 31 69 131 193 270 347 439 547 670 77016x12 400x300 3.75 95.25 70 182 322 518 714 910 1078 1218 1316 1400
2.5 63.5 51 128 211 320 448 576 730 922 1114 128016 400 150 - 1500 13.00 330.2 4.0 101.6 104 268 464 744 1024 1304 1544 1720 1880 2000
5.0 127 130 335 580 930 1280 1630 1930 2150 2350 2500
10 20 30 40 50 60 70 80 90 1000.94 0.94 0.93 0.93 0.92 0.92 0.91 0.91 0.90 0.90
Percent of TravelFL
ANSI ClassValve Size and Orifice Diameter Travel
inches mm equivalent PN inches mm inches mm
-
Cv and FL versus Travel
7SD CH3000 - 03/0241005 Series
Standard Trim Flow Characteristic : EQUAL PERCENTAGEModels 41325, 41425, 41525, 41625 and 41925
Rated Cv
2 50 900 - 1500 1.84 46.7 0.8 20.30.2 0.4 0.8 1.3 2.1 3.8 6.7 10.0 12.4 140.5 1.1 2 3.2 5.2 9.5 16.7 25.0 31.1 35
2 50 150 - 600 0.3 0.8 1.5 2.3 3.8 7.1 12.4 18.5 23.1 263x2 80x50
150 - 15002.50 63.5 1.5 38.1
4x2 100x50 0.8 2.0 3.7 5.9 9.6 17.7 30.9 46.3 57.8 65
3 80 0.7 1.7 3.2 5 8.3 15.2 26.6 39.9 49.8 564x3 100x80 150 - 1500 3.50 88.9 2.0 50.86x3 150x80 1.8 4 8 13 21 38 67 100 124 140
4 100 1 3 5 8 13 24 43 64 80 906x4 150x100 150 - 1500 4.38 111.3 2.0 50.88x4 200x100 3 7 13 20 33 61 107 160 200 225
6 150 4 8 15 24 35 54 80 108 130 1448x6 200x150 150 - 1500 5.12 130.0 2.0 50.810x6 250x150 9 21 39 60 87 135 200 269 326 360
8 200 6 14 25 39 56 86 128 172 208 23010x8 250x200 150 - 1500 6.50 165.1 2.5 63.512x8 300x200 14 34 62 97 140 215 320 430 521 575
10 250 150 - 1500 8.00 203.2 3.0 76.29 21 39 60 87 135 200 269 326 360
23 53 97 151 219 337 500 672 815 90012 300
150 - 1500 9.75 247.7 3.75 95.2513 30 54 84 122 187 278 374 453 500
16x12 400x300 32 75 136 212 306 471 700 941 1142 1260
16 400 150 - 1500 13.00 330.2 5.0 12722 53 97 151 219 337 500 672 815 90056 133 243 378 547 842 1251 1681 2038 2250
10 20 30 40 50 60 70 80 90 1000.94 0.94 0.94 0.94 0.94 0.94 0.93 0.92 0.92 0.90
Percent of TravelFL
ANSI ClassValve Size and Orifice Diameter Travel
inches mm Equivalent PN inches mm inches mm
Note: 1. Ex. 3x2 size = valve with 3" body x standard 2" trim.
-
Cv and FL versus Travel
SD CH3000 - 03/0241005 Series8
Single Stage Lo-dB/Anti-Cavitation Flow Characteristic : LINEARModels: 41335, 41435, 41535, 41635, 41935, 41X45 (with internal diffuser)
Rated Cv
1 2 3 4 5 6 7 8 9 101.3 2.6 3.9 5.2 6.5 7.8 9.1 10.4 11.7 13
2 50 900 - 1500 1.84 46.7 0.8 20.3 1.7 3.4 5.1 6.8 8.5 10.2 11.9 13.6 15.3 172.3 4.6 6.9 9.2 11.5 13.8 16.1 18.4 20.7 23
3 6 9 12 15 18 21 24 27 302.5 5 7.5 10 12.5 15 17.5 20 22.5 25
2 50 150 - 6003 6 10 13 16 19 22 26 29 32
3x2 80x50150 - 1500
2.50 63.5 1.5 38.1 4 9 13 17 22 26 30 34 39 43
4x2 100x506 12 17 23 29 35 41 46 52 587 14 22 29 36 43 50 58 65 724 8 12 16 20 24 28 32 36 40
3 80 5 11 16 22 27 32 38 43 49 544x3 100x80 150 - 1500 3.50 88.9 2.0 50.8 7 14 22 29 36 43 50 58 65 726x3 150x80 10 19 29 38 48 57 67 76 86 95
13 25 38 50 63 75 88 100 113 1257 13 20 26 33 39 46 52 59 65
4 100 9 17 26 34 43 51 60 68 77 856x4 150x100 150 - 1500 4.38 111.3 2.0 50.8 11 22 33 44 55 66 77 88 99 1108x4 200x100 15 30 45 60 75 90 105 120 135 150
20 39 59 78 98 117 137 156 176 19510 20 30 40 50 60 70 80 90 100
6 150 13 26 39 52 65 78 91 104 117 1308x6 200x150 150 - 1500 5.12 130.0 2.5 63.5 18 35 53 70 88 105 123 140 158 17510x6 250x150 23 46 69 92 115 138 161 184 207 230
30 60 90 120 150 180 210 240 270 30017 33 50 66 83 99 116 132 149 165
8 200 2.5 63.5 22 44 66 88 110 132 154 176 198 22010x8 250x200 150 - 1500 6.50 165.1 29 58 87 116 145 174 203 232 261 29012x8 300x200 38 76 114 152 190 228 266 304 342 380
3.0 76.2 50 100 150 200 250 300 350 400 450 50023 45 68 90 113 135 158 180 203 225
2.5 63.5 29 58 87 116 145 174 203 232 261 29010 250 150 - 1500 8.00 203.2 39 78 117 156 195 234 273 312 351 390
3.5 88.952 104 156 208 260 312 364 416 468 52065 130 195 260 325 390 455 520 585 650
2.5 63.5 48 96 144 192 240 288 336 384 432 48012 300 150 - 1500 9.75 247.7 63 126 189 252 315 378 441 504 567 630
16x12 400x300 4.0 101.6 84 168 252 336 420 504 588 672 756 8405.0 127 110 220 330 440 550 660 770 880 990 11002.5 63.5 78 156 234 312 390 468 546 624 702 780
16 400 150 - 1500 13.00 330.2 4.0 101.6 103 206 309 412 515 618 721 824 927 1030136 272 408 544 680 816 952 1088 1224 1360
6.0 152.4 180 360 540 720 900 1080 1260 1440 1620 1800
10 20 30 40 50 60 70 80 90 1000.94 0.94 0.94 0.94 0.94 0.94 0.94 0.94 0.94 0.94
ANSI ClassValve Size and Orifice Diameter Travel
inches mm Equivalent PN inches mm inches mm
Percent of TravelFL
Notes: 1. Ex. 3x2 size = valve with 3" body x standard 2" trim.2. Internal diffuser design only available for valve sizes 6" to 16" (150 to 400mm) and with capacities shaded above.
-
Multi-Stage Lo-dBModels 41355, 41555, 41655 and 41955
Rated Cv
1.2 2.4 3.6 4.8 6.0 7.2 8.4 9.6 10.8 122 50 900 - 1500 1.84 46.7 0.8 20.3 1.9 3.8 5.7 7.6 9.5 11.4 13.3 15.2 17.1 19
2.4 4.8 7.2 9.6 12.0 14.4 16.8 19.2 21.6 242 50 150 - 600 3 6 9 12 15 18 21 24 27 30
3x2 80x50150 - 1500
2.50 63.5 1.5 38.1 4 9 13 17 22 26 30 34 39 434x2 100x50 5 11 16 21 27 32 37 42 48 533 80 5 10 15 20 25 30 35 40 45 50
4x3 100x80 150 - 1500 3.50 88.9 2.0 50.8 8 15 23 30 38 45 53 60 68 756x3 150x80 10 19 29 38 48 57 67 76 86 954 100 7 14 22 29 36 43 50 58 65 72
6x4 150x100 150 - 1500 4.38 111.3 2.0 50.8 11 21 32 42 53 63 74 84 95 1058x4 200x100 13 26 39 52 65 78 91 104 117 130
6 150 10 19 29 38 48 58 67 77 86 968x6 200x150 150 - 1500 5.12 130.0 2.5 63.5 15 30 45 60 75 90 105 120 135 15010x6 250x150 19 38 57 76 95 114 133 152 171 190
8 2002.5 63.5
16 31 47 62 78 93 109 124 140 15510x8 250x200 150 - 1500 6.50 165.1 25 50 75 100 125 150 175 200 225 25012x8 300x200 3.0 76.2 30 60 90 120 150 180 210 240 270 300
2.5 63.5 23 46 69 92 115 138 161 184 207 23010 250 150 - 1500 8.00 203.2
3.5 88.935 70 105 140 175 210 245 280 315 35042 84 126 168 210 252 294 336 378 420
12 300 2.5 63.5 38 75 113 150 188 225 263 300 338 375150 - 1500 9.75 247.7 4.0 101.6 60 120 180 240 300 360 420 480 540 600
16x12 400x300 5.0 127 73 145 218 290 363 435 508 580 653 7252.5 63.5 50 100 150 200 250 300 350 400 450 500
16 400 150 - 1500 13.00 330.2 4.0 101.6 80 160 240 320 400 480 560 640 720 8006.0 152.4 111 221 332 442 553 663 774 884 995 1105
10 20 30 40 50 60 70 80 90 1000.96 0.96 0.96 0.96 0.96 0.96 0.96 0.96 0.96 0.96
ANSI ClassValve Size and Orifice Diameter Travel
inches mm Equivalent PN inches mm inches mm
Flow Characteristic : LINEAR
Percent of TravelFL
Notes: 1. Ex. 3x2 size = valve with 3" body x standard 2" trim.2. Consult Masoneilan for multi-stage trim designs for anti-cavitation service.
Cv and FL versus Travel
9SD CH3000 - 03/0241005 Series
-
75
Pilot Balanced Construction Model 41405Applications up to 850F (454C)
Sizes 2" to 4" shown
Pilot Balanced Construction Model 41405Applications above 450F (232C) to 1050F (566C)
Sizes 6" to 16" shown
17
1212
19
Body S/A Construction
1
3
4
23
6
22
2
7
8
10
21
9
16
15
18
13
14
76
17
36
5
Ref. Part Name1 Valve Plug Stem2 Packing Flange Stud3 Packing Flange Nut4 Packing Flange5 Packing Spacer
6 Packing7 Bonnet8 Valve Body Nut
9 Plug Stem Pin 10 Body Gasket 12 Pilot Spring(s)
13 Seat Ring 14 Seat Ring Gasket
15 Valve Plug (or Piston)16 Cage
17 Conical Spring18 Valve Body
19 Retaining Ring 20 Auxiliary Pilot Plug
21 Valve Body Stud22 Guide Bushing23 Packing Follower
31 Tec Seal 35 Ni-resist Seal Ring
36 Cage Gasket 40 PTFE Seal Ring 41 Nordel Backup Ring 45 Graphite Seal Ring
46 Ni-resist Backup Ring75 Double cage76 Pin
6" - 16" without Conical spring 450F (232C)
6" - 16" with Conical spring > 450F (232C)
Packing withlateral connection
Double cageBalance Plug Construction
Model 41305, 41505, 41605, 41905Sizes 2" to 16"
Refer toSeal Ring
Constructionon Page 14
2" - 4" All temperatures
20
For 41405 Series Valves Only For 6" to 16" Valves Sizes Only
above 450F (232C) For 41605 Series Valves Only Recommended Spare Parts For 41905 Series Valves Only For 41405 / 41505 Series Valves Only For 41305 Series Valves Only
10
10
10
10
SD CH3000 - 03/0241005 Series
-
Materials of Construction
See Note 2
See Note 3
1 Plug Stem 17-4 PH St. St. ASTM A564 GR 6302 Packing Flange Stud 304 St. St. ASTM A193 GR B83 Packing Flange Nut 304 St. St. ASTM A194 GR 8 4 Packing Flange Carbon Steel ASTM A105 Zinc Plated5 Packing Spacer 303 St. St. ASTM A582 TY 3036 Packing Kevlar PTFE (Crane 285K)(1)7 Valve Bonnet Carbon Steel ASTM A216 Grade WCC8 Valve Body Nut Carbon Steel ASTM A194 GR 2H9 Plug Stem Pin 316 St. St. ASTM A479 TY 31610 Valve Body Gasket 316L St. St. w/Flexible Graphite Filler (Spiral Wound)
12 Pilot Spring(s) 2" to 4" Inconel X-750 AMS 5598 (Stacked Washers)(41405 Only) 6" to 16" Inconel X-750 ASTM B637 GR 688 13 Seat Ring 400 Series Martensitic Stainless Steel - Hardened14 Seat Ring Gasket 316L St. St. w/Flexible Graphite Filler (Spiral Wound)15 Valve Plug 17-4 PH St. St. ASTM A747 GR CB7CU-1 Condition H107516 Cage Martensitic St. St. ASTM A487 GR CA6NM CL B Hard Chrome Plated
17 Conical Spring (6" to 16")
18 Valve Body Carbon Steel ASTM A216 Grade WCC19 Retaining Ring (41405 Only) Inconel X-750 AMS 5598
20 Auxiliary Pilot Plug2" to 4" 400 Series Martensitic Stainless Steel - Hardened
(41405 Only) 6" to 16" Martensitic St. St. ASTM A487 GR CA6NM CL B with Chrome Plated Guide and Hardfaced Seat21 Valve Body Stud Alloy Steel ASTM A193 GR B722 Guide Bushing 440C St. St. ASTM A276 TY 440C 23 Packing Follower 303 St. St. ASTM A582 TY 303
Internal Diffuser (6" to 16")(See Note 4) 316 St. St. ASTM A479 TY 316 with Hardfaced Seat
36 Cage Gasket (6" to 16") 316L St. St. w/Flexible Graphite Filler (Spiral Wound)313540
Seal Ring See Page 14414546
Standard Carbon Steel Version
Ref.No
Description
-20F 450F 650F 800F(-29C) (232C) (343C) (427C)
Standard Materials
Temperature Range
Notes: 1. PTFE/Carbon and graphite wipers rings required for ANSI Class 1500 and 2500.2. Conical spring only required for valve sizes 6 to 16 for applications > 450F (232C).3. Cage gasket only required for valve sizes 6 to 16 for applications 450F (232C). 4. Internal Diffuser includes an internal 316SS Seat Ring with hardfaced seat. This part replaces the Seat Ring (Ref. No. 13) when this option is selected. See graphic on page 15.
11
17-4 PH ASTM A564 GR630 Condition H1075 Inconel X-750 ASTM B637 GR 688
Review use of optional materials and configurations for temperature ranges indicated. Standard materials listed may still be applicable depending on specificservice conditions. Consult Masoneilan for appropriate material combinations.
SD CH3000 - 03/0241005 Series
-
See Note 3
12
1 Plug Stem 316 St. St. ASTM A479 TY 3167 Valve Bonnet (2)
18 Valve Body 316 St. St. ASTM A351 GR CF8M
13 Seat Ring 316 St. St. ASTM A479 TY 316 with Hardfaced Seat 15 Valve Plug 316 St. St. ASTM A479 TY 316 with Hardfaced Seat16 Cage 316 St. St. ASTM A479 TY 316 Chrome-Plated 17 Conical Spring (6 to 16) Inconel X-750 ASTM B637 + Shot Peening
20 Auxiliary Pilot Plug (41405 Only) 316 St. St. ASTM A479 TY 316 with Chrome Plated Guide and Hardfaced Seat
22 Guide Bushing 316 St. St. ASTM A479 TY 316 with Hardfacing
Standard Stainless Steel Version(1)
Ref.No Description
-320F (-196C) -50F (46C) 450F (232C) 650F (343C) 1050F (566C)
Standard Materials
Temperature Range
Notes: 1. Materials for other components are same as listed for Standard Carbon Steel Version.2. Extension bonnet required for temperatures below 100F (-73C).3. Conical spring only required for valve sizes 6 to 16 for applications > 450F (232C).4. See trim materials for Standard Carbon Steel Version for Martenistic Trim Option.
Review use of optional materials and configurations for temperature ranges indicated. Standard materials listed may still be applicable depending on specificservice conditions. Consult Masoneilan for appropriate material combinations.
1 Plug StemA286 Super Alloy ASTM A638 GR 660
Inconel X-750 ASTM B637 GR 688
6 PackingLE Packing (1)
Flexible Graphite7 Valve Bonnet18 Valve Body
Chrome-Moly Steel ASTM A217 Grade WC6 or Grade WC9
13 Seat Ring 2 to 4 316 St. St. ASTM A479 TY 316 with Hardfaced Seat 6 to 16 Martensitic St. St. ASTM A487 GR CA6NM CL B with Hardfaced Seat
15 Valve Plug Martensitic St. St. ASTM A487 GR CA6NM CL B Nitrided
16 CageMartensitic St. St. ASTM A487 GR CA6NM CL B Nitrided
316 St. St. ASTM A479 TY 316 Nitrided
20 Auxiliary Pilot Plug (2 to 4) Martensitic St. St. ASTM A487 GR CA6NM CL B with Chrome Plated Guide and Hardfaced Seat (41405 Only)
Optional Configurations and MaterialsRef.No Description
-320F (-196C) -20F (-29C) 650F (343C) 1050F (566C)
Optional Materials
Temperature Range
Notes: 1. LE Packing for low emissions applications is limited to maximum operating pressure of 750 psig (52 bar). 2. Recommended material for use along with solid Stellite bushing for applications above 650F (343C).3. Consult Masoneilan for material combinations for temperatures below 20F (-29C) or above 800F (427C).
Optional Bolting Materials
Description
-320F (-196C) to -150F (101C) to 850F (454C) to 950F (510C) to-150F (-101C) -20F (-29C) 950F (510C) 1050F (566C)
Optional Materials
Temperature RangeRef.No
8 Valve Body Nut
21 Valve Body Stud
316 SS ASTM A194 Grade 8M
Alloy Steel ASTM A194 Grade 4
Alloy Steel ASTM A194 Grade 4
304 SS ASTM A194 Grade 8
316 SS ASTM A193 Grade B8M Class 2
Alloy Steel ASTM A320 Grade L7
316 SS ASTM A193 Grade B16
Super Alloy ASTM A453 Grade 660
Note: Use following materials for 2 and 3 sizes ANSI Class 300/600 at temperatures below -20F (-29C).Studs - 304 SS ASTM A193 Grade B8 Class 2 Nuts 304 SS ASTM A194 Grade 8.
Materials of Construction
SD CH3000 - 03/0241005 Series
-
1 Plug Stem316 St. St. ASTM A479 TY 316 (HRC 22 Max.)
Inconel X-750 ASTM B637 GR 688 (HRC 35 Max.2 Packing Flange Stud
304 St. St. ASTM A193 GR B8 (2)
Alloy Steel ASTM A193 Gr B7M (3)
3 Packing Flange Nut304 St. St. ASTM A194 GR 8 (2)
Alloy Steel ASTM A194 Gr 2M (3)
4 Packing Flange Carbon Steel ASTM A668 CL B5 Packing Spacer 304 St. St. ASTM A479 TY 3046 Packing Kevlar PTFE (Crane 285K)
Carbon Steel ASTM A216 Grade WCC (HRC 22 Max.)7 Valve Bonnet Carbon Steel ASTM A105 (HRC 22 Max.)
316 St. St. ASTM A351 Gr CF8M (HRC 22 Max.)8 Valve Body Nut
Alloy Steel ASTM A194 GR 2H (2)
Alloy Steel ASTM A194 Gr 2M (3)
9 Plug Stem Pin 316 St. St. ASTM A479 TY 316 (HRC 22 Max.)10 Valve Body Gasket 316L St. St. w/Flexible Graphite Filler (Spiral Wound)12 Pilot Spring(s) 2 to 4 Inconel X-750 AMS 5598 (HRC 50 Max.)
(41405 Only) 6 to 16 Inconel X-750 ASTM B637 GR 688 (HRC 50 Max.)13 Seat Ring
316 St. St. ASTM A479 TY 316 (HRC 22 Max.) 316 St. St. ASTM A479 TY 316 with Hardfaced Seat (HRC 22 Max.)
14 Seat Ring Gasket 316L St. St. w/Flexible Graphite Filler (Spiral Wound)15 Valve Plug
316 St. St. ASTM A479 TY 316 with Hardfaced Seat (HRC 22 Max.)Martensitic St. St. ASTM A487 GR CA6NM CL B (HRC 22 Max.)
16 Cage316 St. St. ASTM A479 TY 316 Hard Chrome Plated (HRC 22 Max.)
Martensitic St. St. ASTM A487 GR CA6NM CL B Hard Chrome Plated (HRC 23 Max.)18 Valve Body
Carbon Steel ASTM A216 Grade WCC (HRC 22 Max.)316 St. St. ASTM A351 Gr CF8M (HRC 22 Max.)
19 Retaining Ring (41405 Only) Inconel X-750 AMS 5598 (HRC 50 Max.)20 Auxiliary Pilot Plug
316 St. St. ASTM A479 TY 316 with Hardfaced Seat (HRC 22 Max.)(41405 Only) Martensitic St. St. ASTM A487 GR CA6NM CL B Chrome Plated Guide and Hardfaced Seat (HRC 23 Max.)
21 Valve Body StudAlloy Steel ASTM A193 GR B7 (2)
Alloy Steel ASTM A193 Gr B7M (3)
22 Guide BushingStellite 6 UNS 30006
316 St. St. ASTM A479 TY 316 with Hardfacing 23 Packing Follower 316 St. St. ASTM A479 TY 316
Internal Diffuser (6 to 16) 316 St. St. ASTM A479 TY 316 with Hardfaced Seat (HRC 22 Max.)(Not Shown)36 Cage Gasket (6 to 16) (4) 316L St. St. w/Flexible Graphite Filler (Spiral Wound)313540
Seal Ring (5)See Page 14
414546
Drive Nut (Not Shown) Carbon Steel SAE 1117(2)
Carbon Steel ASTM A105 or SAE 1010-1025 (3)
NACE(1) Configuration and Material Options
Ref.No
Description
-20F 650F(-29C) (343C)
Standard and Optional Materials
Temperature Range
Notes: 1. Materials and processes in accordance with the requirements of NACE specification MR0175. 2. Materials designated for these parts conform to NACE Class III bolting requirements.3. Materials designated for these parts conform to NACE Class I or Class II bolting requirements.4. Cage gasket only required for valve sizes 6 to 16 for applications 450F (232C).5. Seal ring materials for Model 41605 (PTFE Seal Ring) will be replaced with Glass-Reinforced PTFE External Seal Ring (Ref. No. 40) and Viton Internal Seal Ring (Ref. No. 41). 6. Maximum temperature for Models 41305 and 41605 limited to 450F (232C).
13
Valve Sizes: 2" to 16" Body Ratings: ANSI Class 150 to 1500
Materials of Construction
SD CH3000 - 03/0241005 Series
-
Model 41305 Models 41405 and 41505
Model 41905 Model 41605
45404641
PLUG CAGE
PLUG CAGEPLUG CAGE
46 35
Seal Ring Construction
Materials of Construction
31 PLUG CAGE
PLUG
CAGE
Seal Type: Pressure Energized PolymericLeakage: Class IV Standard
(Class V Optional)Temperature: -50F (-46C) to +450F (+232C)
Seal Type: MetalLeakage: From Class II to Class V (with pilot)
Temperature: -320F (-196C) to +1050F (+566C)
Seal Type: TFE and Resilient InnerLeakage: Class IV Standard
Temperature: -20F (-29C) to +300F (+149C)
Seal Type: Graphite and Metal InnerLeakage: Class III and Class IV Standard
Temperature: -320F (-196C) to +850F (+454C)
SD CH3000 - 03/0241005 Series14
HighPressureSide
Seal Shown in FTO Orientation
Note: 1. Optional materials for NACE Service. Viton not recommended for water or steam service.2. Viton is recommended for oil and hydrocarbon service.
Ref.No. Description Materials
31 Seal Ring PTFE + 25% Graphite and ELGILOY Spring35 External Seal Ring Ni-Resist ASTM A439 Type D3 Nitrided CA6NM
40 External Seal Ring Bronze PTFE
41 Internal Seal Ring Nordel
45 External Seal Ring Graphite46 Internal Seal Ring
Temperature Range-320F -50F -20F +300F +450F +650F +850F +1050F
(-196C) (-46C) (-29C) (+149C) (+232C) (+343C) (+454C) (+566C)
Ni-Resist ASTM A439 Type D3
Viton (1)(2)
Glass Reinforced PTFE (1)
-
Models 41335 - 41535 - 41635 - 41935Single Stage
Low Noise Trim FTO Anti-Cavitation Trim FTC
Models 41355 - 41555 - 41655 - 41955Multi-Stage
Low Noise Trim FTO
Trim Types
Model 41405Pilot Balanced Construction FTC
Single Stage Lo-dB with Internal Diffuser
Sizes 6" - 16"
Model 41405Pilot Balanced Construction FTC
15SD CH3000 - 03/0241005 Series
-
Dimensions (inches)
2 50 10.00 10.51 11.26 10.51 11.14 11.26 11.26 11.38 14.76 14.76 14.883 80 11.73 12.24 13.27 12.52 13.15 13.27 13.27 13.39 18.11 17.36 17.52
3x2 80x50 (1) (1) (1)4 100 13.86 14.37 15.51 14.53 15.12 15.51 15.51 15.63 20.87 20.12 20.24
4x2 100x50 (1) (1) (1)4x3 100x80 20.87 20.12 20.246 150 17.76 18.27 20.00 18.62 19.25 20.00 20.00 20.12 30.24 28.11 28.23
6x3 150x80 6x4 150x100 8 200 21.38 21.89 24.02 22.40 22.99 24.02 24.02 24.13 38.24 36.02 36.14
8x4 200x100 8x6 200x150 10 250 26.50 27.01 29.61 27.87 28.50 29.61 29.61 29.72 46.00 42.99 43.11
10x6 250x150 10x8 250x200 12 300 29.02 29.53 32.24 30.51 31.14 32.24 32.24 32.36 48.00 44.49 44.61
12x8 300x200 16 400 40.00 40.51 43.62 41.61 42.20 43.62 43.62 43.74 50.00 54.13 54.49
16x12 400x300 (1) (1) (1) (1)
Pressure ClassA
Body S/A (inches)
ANSI Class 150and equivalent PN
BW&
SW
BW&
SWRF
ANSI Class 300and equivalent PN
ANSI Class 600and equivalent PN
RTJBW&
SWinches mm
ANSI Class 900and equivalent PN
Valve SizeRF RTJRF RTJRTJRF
Butt, Socket Weldor Screwed Ends
Angle
Notes: 1. Consult Masoneilan2. Ex. 3x2 size = valve with 3" body x standard 2" trim.
Flanged
SD CH3000 - 03/0241005 Series16
-
Body S/A (inches)
Pressure ClassA
BW&
SWRF RTJ
ANSI Class 1500and equivalent PN
Valve Size
inches mm
B max
AllClasses
C max
AllClasses
23
3x24
4x24x36
6x36x48
8x48x610
10x610x812
12x816
16x12
Dimensions (inches)
Pressure ClassD
ANSI Class 150and equivalent PN
inches mm
Valve SizeRTJRF
2 50 5.15 5.38 5.27 5.58 5.78 5.84 7.27 7.35 7.27 7.35
3 80 5.92 6.17 6.29 6.61 7.04 7.12 8.89 8.97 9.28 9.36
4 100 7.71 7.94 8.04 8.34 8.53 8.61 10.38 10.46 10.78 10.86
6 150 8.34 8.59 8.77 9.09 11.02 11.07 12.04 12.10 13.89 14.01
ANSI Class 300and equivalent PN
RTJRF
ANSI Class 600and equivalent PN
RTJRF
ANSI Class 900and equivalent PN
RTJRF
ANSI Class 1500and equivalent PN
RTJRF
Angle Body S/A (inches)
17SD CH3000 - 03/0241005 Series
Notes: 1. Consult Masoneilan2. Ex. 3x2 size = valve with 3" body x standard 2" trim.
5080
80x50100
100x50100x80
150150x80150x100
200200x100200x150
250250x150250x200
300300x200
400400x300
14.76 14.76 14.88 3.70 9.8418.11 18.11 18.27 3.66 11.81
(1) (1) (1) 20.87 20.87 20.98 4.41 12.99
(1) (1) (1) 20.87 20.87 20.98 30.24 30.24 30.47 6.54 15.51
38.24 38.24 38.62 8.07 20.51
46.00 46.00 46.38 9.72 22.48
48.00 48.00 48.58 14.13 24.65(1) (1) (1)
50.00 59.37 60.24 17.68 27.32(1) (1) (1)
-
2 50 254 267 286 267 283 286 286 289 375 375 3783 80 298 311 337 318 334 337 337 340 460 441 445
3x2 80x50 (1) (1) (1)4 100 352 365 394 369 384 394 394 397 530 511 514
4x2 100x50 (1) (1) (1)4x3 100x80 530 511 5146 150 451 464 508 473 489 508 508 511 768 714 717
6x3 150x80 6x4 150x100 8 200 543 556 610 569 584 610 610 613 972 915 918
8x4 200x100 8x6 200x150 10 250 673 686 752 708 724 752 752 755 1168 1092 1095
10x6 250x150 10x8 250x200 12 300 737 750 819 775 791 812 819 822 1219 1130 1133
12x8 300x200 16 400 1016 1029 1108 1057 1072 1108 1108 1111 1270 1375 1384
16x12 400x300 (1) (1) (1) (1)
Pressure ClassA
Body S/A (mm)
ANSI Class 150and equivalent PN
BW&
SW
BW&
SWRF
ANSI Class 300and equivalent PN
ANSI Class 600and equivalent PN
RTJBW&
SWinches mm
ANSI Class 900and equivalent PN
Valve SizeRF RTJRF RTJRTJRF
Butt, Socket Weldor Screwed Ends
AngleFlanged
Notes: 1. Consult Masoneilan2. Ex. 80x50 size = valve with 80mm body x standard 50mm trim.
SD CH3000 - 03/0241005 Series18
Dimensions (mm)
-
Body S/A (mm)
Pressure ClassA
BW&
SWRF RTJ
ANSI Class 1500and equivalent PN
Valve Size
inches mm
B max
AllClasses
C max
AllClasses
5080
80x50100
100x50100x80
150150x80150x100
200200x100200x150
250250x150250x200
300300x200
400400x300
375 375 378 94 250460 460 464 93 300(1) (1) (1) 530 530 533 112 330(1) (1) (1) 530 531 533 768 768 774 166 394
972 972 981 205 521
1168 1168 1178 247 571
1219 1219 1234 359 626(1) (1) (1)
1270 1508 1530 449 694(1) (1) (1)
23
3x24
4x24x36
6x36x48
8x48x610
10x610x812
12x816
16x12
Pressure ClassD
ANSI Class 150and equivalent PN
inches mm
Valve SizeRTJRF
2 50 131 137 134 142 147 148 185 187 185 187
3 80 150 157 160 168 179 181 226 228 236 238
4 100 196 202 204 212 217 219 264 266 274 276
6 150 212 218 223 231 280 281 306 307 353 356
ANSI Class 300and equivalent PN
RTJRF
ANSI Class 600and equivalent PN
RTJRF
ANSI Class 900and equivalent PN
RTJRF
ANSI Class 1500and equivalent PN
RTJRF
Angle Body S/A (mm)
Notes: 1. Consult Masoneilan2. Ex. 80x50 size = valve with 80mm body x standard 50mm trim.
19SD CH3000 - 03/0241005 Series
Dimensions (mm)
-
Actuator Dimensions
Shown with optional handwheel
Actuator Size P R S T
6 11.50 15.54 10.00 9.0010 14.50 19.58 10.90 12.0016 18.75 28.22 14.00 18.0023 21.63 30.71 16.00 18.00
Actuator removal clearance = 6 inches
Model 87/88 Actuator (inches)
Actuator Size P R S T
6 292 395 254 22910 368 497 277 30516 476 717 356 45723 549 780 406 457
Actuator removal clearance = 150 mm
Model 87/88 Actuator (mm)
SD CH3000 - 03/0241005 Series20
Model 87/88 Multi-Spring Diaphragm Actuator
-
Actuator Dimensions
18 5.6 20.75 33.4 53 max 8A 856 max 66 max 24 5.0 27.5 34.7 59 max 8A 12
ActuatorSize Removal D E F Type G H J
Clearance Dir. Rev. Dir. Rev.
Actuator
Model 37/38 Actuator (inches)Side-Mounted Handwheel
Reverse (38)Air to Open
Type 8AHandwheel
Direct (37)Air to Close
Reverse (38)Air to Open
Direct (37)Air to Close
*12" NPT for No. 24 Actuator
18 142 527 849 1353 max 8A 2031425 max 1667 max 24 127 699 881 1505 max 8A 305
ActuatorSize Removal D E F Type G H J
Clearance Dir. Rev. Dir. Rev.
Actuator
Model 37/38 Actuator (mm)Side-Mounted Handwheel
*12" NPT for No. 24 Actuator
21SD CH3000 - 03/0241005 Series
Mode 37/38 Spring Diaphragm Actuator
-
Actuator Dimensions
SD CH3000 - 03/0241005 Series22
Actuator Size K L M N
154 14.80 47.80 62.10 26.70314 23.90 49.80 64.50 27.00
Actuator removal clearance = 6 inchesActuator removal clearance with handjack = 7.2 inches
Model 84/85/86 Actuator (inches)
Actuator Size K L M N
154 376 1214 1577 678314 607 1265 1638 686
Actuator removal clearance = 150 mmActuator removal clearance with handjack = 180 mm
Model 84/85/86 Actuator (mm)
Model 84/85/86 Cylinder Actuator
-
Weights
23SD CH3000 - 03/0241005 Series
Body S/A Weights (kg)
2 50 40 40 50 50 40 40 403 80 80 90 120 130 70 100 1004 100 100 120 210 220 90 170 1806 150 190 230 400 470 180 340 3708 200 350 420 630 770 350 520 600
10 250 570 620 1010 1200 510 840 91012 300 740 960 1330 1940 820 1110 151016 400 1570 1740 - - 1510 - -
ValveSize
inches mm
Flanged ConnectionANSI Class ANSI Class ANSI Class ANSI Class ANSI Class ANSI Class ANSI Class
150, 300 and 600 and 900 and 1500 and 600 and 900 and 1500 andequivalent PN equivalent PN equivalent PN equivalent PN equivalent PN equivalent PN equivalent PN
Threaded / Welded Connection
Body S/A Weights (lbs)
2 50 88 88 110 110 88 88 883 80 176 198 265 287 154 221 2214 100 221 265 463 485 198 375 3976 150 419 507 882 1036 397 750 8168 200 772 926 1389 1698 772 1147 1323
10 250 1257 1367 2227 2646 1125 1852 200712 300 1632 2117 2933 4278 1808 2448 333016 400 3462 3837 - - 3330 - -
ValveSize
inches mm
Flanged ConnectionANSI Class ANSI Class ANSI Class ANSI Class ANSI Class ANSI Class ANSI Class
150, 300 and 600 and 900 and 1500 and 600 and 900 and 1500 andequivalent PN equivalent PN equivalent PN equivalent PN equivalent PN equivalent PN equivalent PN
Threaded / Welded Connection
Model 87/88 Spring Diaphragm Actuator (kg)
Size
6 20 2710 38 4816 95 11123 120 154
With HandwheelStandard
Model 87/88 Spring Diaphragm Actuator (lbs)
Size
6 45 6010 85 10516 210 24523 265 340
With HandwheelStandard
-
Weights
SizeStandard With Handwheel
Direct Reverse Direct Reverse
18 86 204 max 106 22424 170 245 max 190 265
Model 37/38 Spring Diaphragm Actuator (kg)
SizeStandard With Handwheel
Direct Reverse Direct Reverse
18 190 450 max 234 49424 375 540 max 419 584
Model 37/38 Spring Diaphragm Actuator (lbs)
Actuator Size Base Weight Small Spring Large Spring Medium Spring Handjack154 266 60 82 100314 709 60 142 84 100
Model 84/85/86 Cylinder Actuator (lbs)
Actuator Size Base Weight Small Spring Large Spring Medium Spring Handjack154 120 27 37 45314 321 27 64 38 45
Model 84/85/86 Cylinder Actuator (kg)
SD CH3000 - 03/0241005 Series24
-
Options
For Accessories and additional Options,consult Masoneilan.
Extension BonnetsEnvironmental Capabilities (LE Packing)Lubricator & Isolation ValveOther Flange FacingsLimit StopsBody Drain PlugReducer and Nipple ConnectionsNACE ComplianceCustom Trim MaterialsU.O.P. Trim MaterialsOther MaterialsSoft Seat (IEC 534-4 and ANSI Class VI)Non-Destructive ExaminationOxygen CleaningElectric Actuators
Options
25SD CH3000 - 03/0241005 Series
-
Notes
SD CH3000 - 03/0241005 Series26
-
Notes
27SD CH3000 - 03/0241005 Series
-
AUSTRIADresser Valves Europe GmbHKaiserallee 14A-2100 Korneuburg (near Wien), AustriaPhone: 43-2262-63689Fax: 43-2263-6368915
BELGIUMDresser Europe S.p.r.L.281-283 Chaussee de Bruxelles281-283 Brusselsesteenweg1190 Brussels, BelgiumPhone: 32-2-344-0970Fax: 32-2-344-1123
BRAZILDresser Industria E Comercio LtdaDivisao MasoneilanRua Senador Vergueiro, 43309521-320 Sao Caetano Do SulSao Paolo, BrazilPhone: 55-11-453-5511Fax: 55-11-453-5565
CANADAAlbertaDresser Flow ControlDI Canada, Inc. Suite 1300, 311-6th Ave., S.W.Calgary, Alberta T2P 3H2CanadaPhone: 403-290-0001Fax: 403-290-1526
OntarioDresser Flow ControlDI Canada, Inc. 5010 North Service RoadBurlington, Ontario L7L 5R5 CanadaPhone: 905-335-3529Fax: 905-336-7628
CHINADresserSuite 2403, Capital Mansion6 Xinyuannan RoadChao Yang districtBeijing 100040Phone: 86-10-6466-1164Fax: 86-10-6466-0195
FRANCEDresser Produits Industriels S.A.S.Division Masoneilan 4, place de Saverne92400 CourbevoieFrancePhone: 33-1-49-04-90-00Fax: 33-1-49-04-90-10
GERMANYDresser Valves Europe GmbHKlein-Kollenburg-Strasse 78-8047877 Willich, Germany Mailing Address:P.O. Box 120847860 Willich, GermanyPhone: 49-2156-9189-0Fax: 49-2156-9189-99
INDIADresser Valve India Pvt. Ltd.305/306 Midas - Sahar PlazaMathurdas Vasanji RoadJ.B. Nagar - Andheri EastMumbai, India 400 059Phone: 91-22-835-4790Fax: 91-22-835-4791
ITALYDresser Italia S.r.L..Masoneilan OperationVia Cassano, 7780020 Casavatore (Naples), ItalyPhone: 39-81-7892-111Fax: 39-81-7892-208
JAPANNiigata Masoneilan Company, Ltd.20th Floor, Marive East TowerWBG 2-6 Nakase, Mihama-KuChiba-shi, Chiba 261-7120, JapanPhone: 81-43-297-9222Fax: 81-43-299-1115
KOREADresser Korea, Inc.#2107 Kuk Dong Building 60-1, 3-Ka, Choongmu-roChung-Ku, Soeul, 100705Phone: 82-2-274-0792Fax: 82-2-274-0794
KUWAITDresserP.O. Box 242Safat 13003, Kuwait Courier:Flat No. 36, Floor 8Gaswa Complex, MahboulaKuwaitPhone: 965-9061157
MALAYSIADresser Flow Control - Far EastBusiness Suite 19A-9-1Level 9, UOA Centre No. 19 Jalan Pinang50450 Luala Lumpur, MalaysiaPhone: 60-3-2163-2322Fax: 60-3-2163-6312
MEXICODresser Valve de Mexico, S.A. de C.V.Henry Ford No. 114, Esq. FultonFraccionamiento Industrial San Nicolas54030 Tlalnepantla Estado de MexicoPhone: 52-5-310-9863Fax: 52-5-310-5584
THE NETHERLANDSDresser Valves EuropeSteenhouwerstraat 113194 AG HoogvlietThe NetherlandsMailing Address:P.O. Box 640NL3190 AN Hoogvliet RTThe Netherlands Phone: 31-10-438-4122Fax: 31-10-438-4443
SAUDI ARABIADresser Al RushaidValve & Instrument CompanyP.O. Box 10145 Jubail Industrial City 31961Saudi ArabiaPhone: +966-3-341-0278Fax: +966-3-341-0696
SINGAPOREDresser Singapore, Pte. Ltd.16, Tuas Avenue 8Singapore 639231Phone: 65-861-6100Fax: 65-861-7172
SOUTH AFRICADresser Ltd., South Africa BranchP.O. Box 2234, 16 Edendale Road Eastleigh, Edenvale 1610 Republic of South Africa Phone: 27-11-452-1550Fax: 27-11-452-6542
SPAINMasoneilan S.A.C/ Murcia 39 C08830 Sant Boi de LlobregatBarcelona, SpainPhone: 34-93-652-6430Fax: 34-93-652-6444
SWITZERLANDDresser Valves Europe SAFrauntalweg 76CH-8045 Zurich, SwitzerlandMailing Address:P.O. Box 3568CH-8021 Zurich, SwitzerlandPhone: 41-1-450 28 91Fax: 41-1-450 28 95
UNITED ARAB EMIRATESDresserMiddle East OperationsPost Box 61302 (mail)R/A 8, Units JA01/JA02 (courier)Jebel Ali Free ZoneUnited Arab EmiratesPhone: 971-4-8838-752Fax: 971-4-8838-038
UNITED KINGDOMDI U.K. LimitedTrevithick WorksGillibrands Estate, SkelmersdaleLancashire WN8 9TU, England United KingdomPhone: 44-1695-52600Fax: 44-1695-52662
DI U.K.Unit 4, Suite 1.1, Nobel HouseGrand Union Office ParkPacket Boat Lane, UxbridgeMiddlesex UB8 2GH, EnglandUnited KingdomPhone: 44-1895-454900Fax: 44-1895-454919
UNITED STATESNorthern RegionDresser Flow Control85 Bodwell StreetAvon, MA 02322-1190Phone: 508-586-4600Fax: 508-427-8971
Southern RegionDresser Flow Control11100 West Airport Blvd.Stafford, TX 77477-3014Phone: 281-568-2211Toll Free: 800-847-1099Fax: 281-568-1414
South Texas OperationsDresser Flow Control4841 Leopard StreetCorpus Christi, TX 78408-2621Phone: 361-877-2414Fax: 361-584-1196
Masoneilan Aftermarket Sales & Service Center16030 Bear Bayou DriveChannelview, TX 77530Phone: 281-862-1500Fax: 281-862-1550
Western RegionDresser Flow ControlMasoneilan2950 East Birch StreetBrea, CA 92821Phone: 714-572-1528Fax: 714-572-1463
Copyright 2002. Dresser, Inc. 3/02
Masoneilan DirectSales Offices
-
PressureDrop Tables
-
41305Pressure Energized PTFE Seal Ring Page(s)
Standard, Single/Multi-Stage Lo-dB TrimPTFE or LE Packing
Air to Open and Air to Close, Flow to OpenLeakage Class IV........................................................ 1 - 4Leakage Class V ........................................................ 5 - 6
41405Models 41415 & 41425
Pilot Balanced Construction - Leakage Class IV (Class V Optional)Standard Trim
PTFE or LE PackingAir to Open and Air to Close, Flow to Close .................. 7 - 8
Flexible Graphite PackingAir to Open and Air to Close, Flow to Close ................12 - 13
Standard Trim with 37/38 Spring-Diaphragm & 84/85/86 Cylinder Actuators
PTFE or LE PackingAir to Open and Air to Close, Flow to Close ...................... 10
Flexible Graphite PackingAir to Open and Air to Close, Flow to Close ...................... 15
Models 41435 & 41445Pilot Balanced Construction - Leakage Class IV (Class V Optional)
Single Stage Lo-dB/Anti-Cavitation Trim (including Diffuser)PTFE or LE Packing
Air to Open and Air to Close, Flow to Close ........................ 9Flexible Graphite Packing
Air to Open and Air to Close, Flow to Close ...................... 14Single Stage Lo-dB/Anti-Cavitation Trim (including Diffuser) with 37/38 Spring Diaphragm & 84/85/86 Cylinder Actuators
PTFE or LE PackingAir to Open and Air to Close, Flow to Close ...................... 11
Flexible Graphite PackingAir to Open and Air to Close, Flow to Close ...................... 16
41505Metal Seal Ring - Leakage Class II & III Page(s)
Standard, Single/Multi-Stage Lo-dB TrimPTFE or LE Packing
Air to Open and Air to Close, Flow to Open .............. 17 - 20Flexible Graphite
Air to Open and Air to Close, Flow to Open .............. 21 - 24
41605PTFE Seal Ring - Leakage Class IV
Standard, Single/Multi-Stage Lo-dB TrimPTFE or LE Packing
Air to Open and Air to Close, Flow to Open .............. 25 - 28
41905Graphite Seal Ring - Leakage Class III & IV
Standard, Single/Multi-Stage Lo-dB TrimPTFE or LE Packing
Air to Open and Air to Close, Flow to Open .............. 29 - 32Flexible Graphite Packing
Air to Open and Air to Close, Flow to Open .............. 33 - 36
41005 Series Pressure Drop Tables - PH3000 03/02Note: Allowable Pressure Drop Tables provided in both US Units (psi) and Metric Units (bar) in separate sections but on corresponding page numbers.
Refer to CH3000 for 41005 Series technical specifications.
Standard Construction ANSI Class 150 to 1500
Allowable pressure drops represent shutoff capability. ConsultMasoneilan for appropriate actuator selection for Fail Open actionin Air to Close configurations with Flexible Graphite Packing.
-
PH3000 - 03/0241005 Series
1US Units
Allowable Pressure Drops for 41305 Series (US)Air to Open and Air to Close, Flow to Open
Pressure Energized PTFE Seal RingBody Rating: ANSI Class 150 to 1500Leakage: Per IEC 534-4 and ANSI/FCI 70.2, Class IV PTFE Packing
Notes: 1. Inlet pressure must not exceed the ANSI rating for the selected pressure class.2. Ex. 3x2 Size = Valve with 3" Body x Standard 2" Trim.3. See CH3000 for orifice size and travel required to obtain rated Cv.
AIR TO OPEN AIR TO CLOSERated Cv
2
3x24x2
50
80x50100x50
600
2 50 1500
34x36x3
1500
46x48x4
1500
68x6
10x6
150200x150250x150
1500
3075
304353
2665
1640
1013172330
121924
1435
60155
40547295125
507595
56140
95240
6585110150195
72105130
90225
400
100130175230300
96150190
144360
10
6
6 - 30 40 139211 - 23 35 332121 - 45 55 3750
6 - 30 40 63811 - 23 35 191421 - 45 55 37503 - 15 25 3486 - 30 40 1682
11 - 23 35 36693 - 15 25 1896 - 30 40 1492
11 - 23 35 342321 - 45 55 3750
3 - 15 25 8126 - 30 40 2524
11 - 23 35 3750
6 - 30 40 126211 - 23 35 316221 - 45 55 37503 - 15 25 5516 - 30 40 2277
11 - 23 35 375021 - 45 55 3750
6 - 30 40 66711 - 23 35 200221 - 45 55 37503 - 15 25 1606 - 30 40 1407
11 - 23 35 324921 - 45 55 3750
100150x100200x100
2532435872
10
16
23
16
23
16
23
1500
Valve size MaximumLinear Equal % Lo-dB Multi-Stage Actuator Bench Actuator Bench
inches mmANSI Class Lo-dB size range size range
3 - 15 25 27413 - 15 30 37506 - 30 40 18136 - 30 45 3750 3 - 15 35 36263 - 15 40 37506 - 30 50 32056 - 30 55 3750
3 - 15 25 24953 - 15 30 37506 - 30 40 19146 - 30 45 37503 - 15 20 11753 - 15 25 37506 - 30 40 31336 - 30 45 37503 - 15 25 22483 - 15 30 37506 - 30 45 35826 - 30 50 37503 - 15 25 36983 - 15 30 37506 - 30 40 28726 - 30 45 37503 - 15 25 13923 - 15 30 26696 - 30 50 35686 - 30 55 37503 - 15 25 24083 - 15 30 37506 - 30 40 19146 - 30 45 3750
10
80100x80150x80
6
10
16
23
16
23
16
23
Supplypsi
ShutoffDelta P
psi
Supplypsi
ShutoffDelta P
psi
Return to US Units Index
-
PH3000 - 03/0241005 Series
2US Units
Allowable Pressure Drops for 41305 Series (US)Air to Open and Air to Close, Flow to Open
6 - 30 40 17411 - 23 35 103021 - 45 55 2509
6 - 30 40 63811 - 23 35 175521 - 45 55 37508 - 30 35 1291
15 - 50 55 2930
15 - 22 35 159325 - 37 55 321212 - 18 35 312625 - 37 55 3750
6 - 30 40 2911 - 23 35 87021 - 45 55 2350
6 - 30 40 47911 - 23 35 159521 - 45 55 3263
8 - 30 35 1146 15 - 50 55 2756
15 - 22 35 146125 - 37 55 309612 - 18 35 300925 - 37 55 3750
6 - 30 35 62415 - 50 55 2756
15 - 24 35 146125 - 40 55 309612 - 19 35 300925 - 40 55 3750
Pressure Energized PTFE Seal RingBody Rating: ANSI Class 150 to 1500Leakage: Per IEC 534-4 and ANSI/FCI 70.2, Class IV PTFE Packing
3 - 15 25 6383 - 15 30 14366 - 30 50 19736 - 30 55 27123 - 15 25 12623 - 15 30 23356 - 30 50 31186 - 30 55 37503 - 13 20 5803 - 13 25 15236 - 27 45 16976 - 27 50 2567
40 199860 375050 118960 2807
12 - 18 40 375050 329160 3750
3 - 15 25 4793 - 15 30 12766 - 30 50 18136 - 30 55 25533 - 15 25 11173 - 15 30 21616 - 30 50 29446 - 30 55 37503 - 13 20 421 3 - 13 25 13636 - 27 45 15376 - 27 50 2408
40 187060 375050 105260 2687
12 - 18 40 375050 317660 3750
3 - 15 25 9433 - 15 30 17846 - 30 40 17846 - 30 50 2611
40 166660 375050 71260 2347
12 - 19 40 375050 248260 3750
AIR TO OPEN AIR TO CLOSEValve size Maximum
Linear Equal % Lo-dB Multi-Stage Actuator Bench Actuator Benchinches mm
ANSI Class Lo-dB size range size range
Rated Cv
154
314
810x812x8
200250x200300x200
1500
415640
165220290380
155250
230575
500 300
18
16
23
25 - 37
15 - 22
25 - 37
10 250 1500
510 230
1000 360900
520650
16
314
18
225290390
23
350420
154
314
154
18
18
16
23
154
314
16
314
18
23
15425 - 37
15 - 22
25 - 37
314
18
15425 - 40
15 - 24
25 - 40
Notes: 1. Inlet pressure must not exceed the ANSI rating for the selected pressure class.2. Ex. 3x2 Size = Valve with 3" Body x Standard 2" Trim.3. See CH3000 for orifice size and travel required to obtain rated Cv.
Supplypsi
ShutoffDelta P
psi
Supplypsi
ShutoffDelta P
psi
Return to US Units Index
-
PH3000 - 03/0241005 Series
3US Units
Allowable Pressure Drops for 41305 Series (US)Air to Open and Air to Close, Flow to Open
Pressure Energized PTFE Seal RingBody Rating: ANSI Class 150 to 1500Leakage: Per IEC 534-4 and ANSI/FCI 70.2, Class IV PTFE Packing
1216x12
300400x300
11 - 23 35 68221 - 45 55 2147
6 - 30 40 30511 - 23 35 142121 - 45 55 3481
6 - 27 35 45010 - 33 40 1436
15 - 24 35 120325 - 40 55 273112 - 19 35 265025 - 40 55 3750
6 - 30 35 45012 - 30 35 1885
15 - 25 35 120325 - 42 55 273112 - 20 35 265025 - 42 55 3750
15 - 27 35 120325 - 46 55 273112 - 22 35 265025 - 46 55 3750
3 - 15 25 3053 - 15 30 11176 - 30 50 17406 - 30 55 23503 - 15 25 9433 - 15 30 19736 - 30 50 27416 - 30 55 37503 - 14 25 8703 - 14 30 16826 - 27 40 12046 - 27 45 1987
40 129860 375050 34360 1870
12 - 19 40 375050 183060 3750
3 - 15 25 5223 - 15 30 13056 - 30 45 13056 - 30 50 2016
40 120360 375050 18460 1712
12 - 20 40 375050 150660 375040 82160 375060 1076
12 - 22 40 375050 21060 3326
Valve size MaximumLinear Equal % Lo-dB Multi-Stage Actuator Bench Actuator Bench
inches mmANSI Class Lo-dB size range size range
Rated Cv
154
314
1500
18
16
23
18
314
154
18
16
23
154
314
18
314
314
154
154
Notes: 1. Inlet pressure must not exceed the ANSI rating for the selected pressure class.2. Ex. 3x2 Size = Valve with 3" Body x Standard 2" Trim.3. See CH3000 for orifice size and travel required to obtain rated Cv.
770
480630
375
5001260
1400
1100
840 600154
314
25 - 40
15 - 24
15 - 25
15 - 27
25 - 40
25 - 42
25 - 42
25 - 46
25 - 46
AIR TO OPEN AIR TO CLOSE
725
Supplypsi
ShutoffDelta P
psi
Supplypsi
ShutoffDelta P
psi
Return to US Units Index
-
PH3000 - 03/0241005 Series
4US Units
Pressure Energized PTFE Seal RingBody Rating: ANSI Class 150 to 1500Leakage: Per IEC 534-4 and ANSI/FCI 70.2, Class IV PTFE Packing
16 400
11 - 23 35 42121 - 45 55 1900
6 - 30 40 4411 - 23 35 117521 - 45 55 3191
6 - 30 35 18912 - 30 35 1624
15 - 25 35 99225 - 42 55 266912 - 20 35 258025 - 42 55 3750
15 - 28 35 99225 - 46 55 266912 - 22 35 258025 - 46 55 3750
15 - 30 35 99225 - 50 55 266912 - 24 35 258025 - 50 55 3750
3 - 15 25 443 - 15 30 8566 - 30 50 13926 - 30 55 20893 - 15 25 6673 - 15 30 17266 - 30 45 14656 - 30 50 24663 - 15 25 2613 - 15 30 10736 - 30 45 10596 - 30 50 1769
50 266960 375060 1550
12 - 20 40 375050 132560 375050 225060 375060 853
12 - 22 40 375025 - 46 60 3322
50 183160 350860 153
12 - 24 40 375025 - 50 60 1896
Valve size MaximumLinear Equal % Lo-dB Multi-Stage Actuator Bench Actuator Bench
inches mmANSI Class Lo-dB size range size range
Rated Cv
154
3141500
18
16
23
314
154
18
16
23
154
314
314
314
154
154
Notes: 1. Inlet pressure must not exceed the ANSI rating for the selected pressure class.2. Ex. 3x2 Size = Valve with 3" Body x Standard 2" Trim.3. See CH3000 for orifice size and travel required to obtain rated Cv.
1280 780 500
2000
154
314
25 - 42
15 - 25
15 - 30
25 - 42
AIR TO OPEN AIR TO CLOSE
15 - 28
25 - 46
25 - 50
Allowable Pressure Drops for 41305 Series (US)Air to Open and Air to Close, Flow to Open
2500
10301360 800
900
1800 1105
Supplypsi
ShutoffDelta P
psi
Supplypsi
ShutoffDelta P
psi
Return to US Units Index
-
PH3000 - 03/0241005 Series
5US Units
Allowable Pressure Drops for 41305 Series (US)Air to Open and Air to Close, Flow to Open
3 - 15 35 27993 - 15 40 37506 - 30 50 22196 - 30 55 37503 - 15 45 33943 - 15 50 37506 - 30 60 29593 - 15 30 19293 - 15 35 37506 - 30 50 32053 - 15 35 32633 - 15 40 37506 - 30 50 26836 - 30 55 37503 - 15 30 36693 - 15 35 37506 - 30 45 28286 - 30 50 37503 - 15 35 22193 - 15 40 37506 - 30 50 16536 - 30 55 35533 - 15 30 26113 - 15 35 37506 - 30 45 17846 - 30 50 37503 - 15 35 8413 - 15 40 21476 - 30 50 3926 - 30 55 17693 - 15 35 30713 - 15 40 37506 - 30 50 25386 - 30 55 37503 - 15 40 5953 - 15 45 13926 - 30 50 6 - 30 55 3773 - 15 35 11463 - 15 40 22056 - 30 50 8416 - 30 55 19293 - 13 40 19006 - 27 55 20743 - 15 40 37506 - 30 55 3750
15 - 22 60 56840 195760 3750
25 - 37 60 1924
21 - 45 55 372711 - 23 35 235021 - 45 55 3750
21 - 45 55 1668
11 - 23 35 104421 - 45 55 3750
11 - 23 35 18921 - 45 55 3750
11 - 23 35 221921 - 45 55 3750
21 - 45 55 3133
11 - 23 35 118921 - 45 55 3750
21 - 45 55 1479
11 - 23 35 1521 - 45 55 3750
21 - 45 55 131
21 - 45 55 1624
20 - 50 55 1856
21 - 45 50 3750
25 - 37 55 2748
Pressure Energized PTFE Seal RingBody Rating: ANSI Class 150 to 1500Leakage: Per IEC 534-4 and ANSI/FCI 70.2, Class V PTFE Packing
AIR TO OPEN AIR TO CLOSEValve size Maximum
Linear Equal % Lo-dB Multi-Stage Actuator Bench Actuator Benchinches mm
ANSI Class Lo-dB size range size range
Rated Cv
23x24x2
5080x50100x50
600
1500
2 50 1500
34x36x3
80100x80150x80
1500
46x48x4
1500
68x6
10x6
150200x150250x150
1500
810x812x8
200250x200300x200
1500
3075
304353
2665
1640
1013172330
121924
1435
60155
40547295125
507595
56140
95240
6585110150195
72105130
90225
400
100130175230300
96150190
144360
640
165220290380
155250
230575
500 300
16
6
18
100150x100200x100
2532435872
10
16
23
16
23
16
23
16
23
10
6
18
10
16
23
16
23
16
23
16
23
10
24 24
314314
154
12 - 18
Notes: 1. Inlet pressure must not exceed the ANSI rating for the selected pressure class.2. Ex. 3x2 Size = Valve with 3" Body x Standard 2" Trim.3. See CH3000 for orifice size and travel required to obtain rated Cv.
Supplypsi
ShutoffDelta P
psi
Supplypsi
ShutoffDelta P
psi
Return to US Units Index
-
PH3000 - 03/0241005 Series
6US Units
21 - 45 55 957
20 - 50 55 1189
21 - 45 50 3750
25 - 37 55 1542
19 - 46 55 3750
25 - 40 55 1542
21 - 45 55 102
16 - 45 50 201625 - 41 55 87
18 - 50 55 2785
25 - 42 55 87
25 - 46 55 87
21 - 45 55 21 - 45 55
15 - 50 55 21822 - 50 55 2944
18 - 50 55 1450
Pressure Energized PTFE Seal RingBody Rating: ANSI Class 150 to 1500Leakage: Per IEC 534-4 and ANSI/FCI 70.2, Class V PTFE Packing
3 - 15 50 14653 - 15 40 15373 - 15 45 25826 - 30 50 876 - 30 55 12623 - 13 45 21036 - 27 55 14073 - 15 40 34816 - 30 55 3481
40 54260 3750
25 - 37 60 7083 - 15 40 6673 - 15 45 15376 - 30 50 18426 - 30 55 3162
40 20860 3750
3 - 15 55 14073 - 15 40 7403 - 15 45 17986 - 30 55 4353 - 14 50 15526 - 27 55 1896 - 28 55 2698
50 180160 3750
3 - 15 45 583 - 15 55 16103 - 15 40 20023 - 15 45 3205
50 164560 375050 102260 3750
3 - 15 55 3 - 15 45 4063 - 15 50 14946 - 30 55
3 - 15 50 3 - 15 55 2033 - 15 40 6823 - 15 45 1871
12 - 20 60 248560 1801
60 1117
AIR TO OPEN AIR TO CLOSEValve size Maximum
Linear Equal % Lo-dB Multi-Stage Actuator Bench Actuator Benchinches mm
ANSI Class Lo-dB size range size range
Rated Cv
10 250 1500
150012
16x12300
400x300
150016
510 230
1000
360900
520650
770
780
480630 375
50012601400
500
2000
18
24
314
24
400
225290390
1280
23
16
23
18
840
23
16
24
23
350420
24 24
314
24
24
Allowable Pressure Drops for 41305 Series (US)Air to Open and Air to Close, Flow to Open
Notes: 1. Inlet pressure must not exceed the ANSI rating for the selected pressure class.2. Ex. 3x2 Size = Valve with 3" Body x Standard 2" Trim.3. See CH3000 for orifice size and travel required to obtain rated Cv.
314
314
314
2500
18
24
314
24
23
16
24
23
314
24
16
18
24
18
18
314
314
314
314
314
314
12 - 18
12 - 19
12 - 19
12 - 24
12 - 22
12 - 22
12 - 20
1100
600
725
10301360
800
900
1800 1105
Supplypsi
ShutoffDelta P
psi
Supplypsi
ShutoffDelta P
psi
Return to US Units Index
-
610
16
23
16
23
16
23
16
23
16
23
16
23
6
10
16
10
16
23
10
PH3000 - 03/0241005 Series
7US Units
Allowable Pressure Drops for 41405 Series (US)Air to Open and Air to Close, Flow to Close
Pilot Balanced ConstructionStandard TrimModels 41415 and 41425Body Rating: ANSI Class 150 to 1500Leakage: Per IEC 534-4 and ANSI/FCI 70.2, Class IV (Class V Optional)PTFE Packing
Notes: 1. Inlet pressure must not exceed the ANSI rating for the selected pressure class.2. Allowable pressure drops are based on dynamic stability calculations.3. See CH3000 for orifice size to obtain rated Cv.4. Allowable pressure drops are applicable for both Class IV and Class V leakage.
VALVE AIR TO OPEN AIR TO CLOSESIZE inches (mm)
ANSI class TravelLIN Cvfactor
= % Cvfactor
ACTUATORSIZE
Benchrange SUPPLY
Allow.Delta P
Benchrange SUPPLY
Allow.Delta P
2 (50) 0.8
40 35 14
56140
90225
26
65
16
60
95
30
155
240
75
2
4 (100)4 (100)
3 (80)3 (80)
2
1.52 (50)
150/600 900/1500 inches 1 0.4 1 0.4 psi psi psi psi11 - 23 29 421 3 - 15 27 42121 - 45 56 827 6 - 30 44 82711 - 23 28 696 3 - 15 24 69621 - 45 55 1392 6 - 30 40 13926 - 30 39 2219 3 - 15 22 1117
11 - 23 28 1117 6 - 30 39 22196 - 30 39 3191
11 - 23 28 1595 11 - 23 28 406 3 - 15 27 40621 - 45 54 812 6 - 30 44 81211 - 23 28 667 3 - 15 24 66721 - 45 54 1379 6 - 30 40 13496 - 30 37 2147 3 - 15 22 1073
11 - 23 27 1073 6 - 30 39 214711 - 23 29 464 3 - 15 26 46421 - 45 56 928 6 - 30 42 92811 - 23 28 740 3 - 15 23 74021 - 45 56 1479 6 - 30 40 14796 - 30 39 2132 3 - 15 22 1059
11 - 23 28 1059 6 - 30 38 213211 - 23 29 450 3 - 15 26 45021 - 45 56 899 6 - 30 42 89911 - 23 28 711 3 - 15 23 71121 - 45 55 1436 6 - 30 40 14366 - 30 39 2060 3 - 15 22 1030
11 - 23 28 1030 6 - 30 38 2060 21 - 45 55 2060
21 - 45 55 1015 3 - 15 28 508 6 - 30 45 1015
11 - 23 28 740 3 - 15 25 74021 - 45 55 1465 6 - 30 42 146521 - 45 55 972 3 - 15 28 493
6 - 30 45 97211 - 23 28 696 3 - 15 25 69621 - 45 55 1407 6 - 30 42 140721 - 45 56 870 3 - 15 28 435
6 - 30 45 87011 - 23 29 624 3 - 15 25 62421 - 45 56 1247 6 - 30 42 124711 - 23 3 - 15 28 40621 - 45 56 812 6 - 30 45 81221 - 45 56 1175 3 - 15 25 580
6 - 30 42 1175 21 - 45 59 1175
Return to US Units Index
-
PH3000 - 03/0241005 Series
8US Units
Allowable Pressure Drops for 41405 Series (US)Air to Open and Air to Close, Flow to Close
Pilot Balanced ConstructionStandard TrimModels 41415 and 41425Body Rating: ANSI Class 150 to 1500Leakage: Per IEC 534-4 and ANSI/FCI 70.2, Class IV (Class V Optional)PTFE Packing
Notes: 1. Inlet pressure must not exceed the ANSI rating for the selected pressure class.2. Allowable pressure drops are based on dynamic stability calculations.3. See CH3000 for orifice size to obtain rated Cv.4. Allowable pressure drops are applicable for both Class IV and Class V leakage.
21 - 45 60 1030 3 - 15 29 290 6 - 30 45 667
11 - 23 32 870 3 - 15 26 45021 - 45 60 1479 6 - 30 42 98621 - 45 3 - 15 34 58
11 - 23 43 29021 - 45 60 406 3 - 15 29 116
11 - 23 38 49311 - 23 40 870 3 - 15 26 174
11 - 23 35 71121 - 45 60 537 3 - 15 33 174
6 - 30 49 42121 - 45 60 1015 3 - 15 29 290
6 - 30 45 65321 - 45 60 131 3 - 15 33 58
11 - 23 42 31921 - 45 60 392 3 - 15 29 102
11 - 23 37 46421 - 45 60 87 3 - 15 33 44
6 - 30 49 102 11 - 23 42 203
21 - 45 60 131 3 - 15 29 73 6 - 30 45 160 11 - 23 37 305
21 - 45 60 44 6 - 30 49 73 11 - 23 42 145
21 - 45 60 87 6 - 30 45 102 11 - 23 37 203
21 - 45 60 29 6 - 30 45 58 11 - 23 37 116
128016 (400) 2.5
16
23
10
16
23
16
23
23
23
16
23
16
16
23
16 (400)
770
12 (300) 212 (300)
415
640
165
575
360
230
144
8 (200)8 (200)
6 (150)6 (150)
510
10 (250)
1.5
1.5
2
10 (250)
VALVE AIR TO OPEN AIR TO CLOSESIZE inches (mm)
ANSI class TravelLIN Cvfactor
= % Cvfactor
ACTUATORSIZE
Benchrange SUPPLY
Allow.Delta P
Benchrange SUPPLY
Allow.Delta P
150/600 900/1500 in 1 0.4 1 0.4 psi psi psi psi
2.5
1.5
400
Return to US Units Index
-
PH3000 - 03/0241005 Series
9US Units
Allowable Pressure Drops for 41405 Series (US)Air to Open and Air to Close, Flow to Close
Pilot Balanced ConstructionSingle Stage Lo-dB/Anti-Cavitation Trim (including Diffuser)Models 41435 and 41445Body Rating: ANSI Class 150 to 1500Leakage: Per IEC 534-4 and ANSI/FCI 70.2, Class IV (Class V Optional)PTFE Packing
Notes: 1. Inlet pressure must not exceed the ANSI rating for the selected pressure class.
2. Allowable pressure drops are based on dynamic stability calculations.
3. See CH3000 for orifice size to obtain rated Cv.4. Allowable pressure drops are applicable for both Class IV and Class V leakage.
VALVE AIR TO OPEN AIR TO CLOSESIZE inches (mm)
ANSI class Travel Cv Lo-dBACTUATOR
SIZEBenchrange SUPPLY
Allow.Delta P
Benchrange SUPPLY
Allow.Delta P
2 (50) 0.8
1013172330
6
10
16
2 (50)
3 (80) 3 (80)
4 (100) 4 (100)
6 (150) 6 (150)
8 (200) 8 (200)
10 (250) 10 (250)
12 (300) 12 (300)
16 (400) 16 (400)
1.5
2.0
2.0
2.5
2.5
2.5
2.5
2.5
2532435872
100130175230300
165220290380
225290390
480630
780
6585110150195
40547295125
10
16
23
23
16
23
16
23
16
23
16
23
16
23
16
23
16
150/600 900/1500 inches psi psi psi psi
11 - 23 28 406 11 - 23 36 40621 - 45 54 812 6 - 30 44 81211 - 23 28 682 3 - 15 24 68221 - 45 54 1363 6 - 30 40 13636 - 30 37 1088 3 - 15 22 1088
11 - 23 27 2176 6 - 30 39 217611 - 23 29 450 3 - 15 26 45021 - 45 56 899 6 - 30 42 89911 - 23 28 725 3 - 15 23 72521 - 45 56 1450 6 - 30 40 14506 - 30 39 1044 3 - 15 22 1044
11 - 23 28 1500 6 - 30 38 150021 - 45 55 986 3 - 15 28 493
21 - 45 61 98611 - 23 28 711 3 - 15 25 71121 - 45 55 1421 6 - 30 42 142121 - 45 56 841 3 - 15 28 421
6 - 30 45 84111 - 23 29 595 3 - 15 25 59521 - 45 56 1204 6 - 30 42 120421 - 45 59 1204 3 - 15 29 377
11 - 23 38 595 6 - 30 45 870
11 - 23 30 856 3 - 15 26 59521 - 45 59 1726 11 - 23 35 856
6 - 30 42 126221 - 45 60 870 3 - 15 33 232
11 - 23 42 435 6 - 30 49 580
11 - 23 3 - 15 29 37721 - 45 59 1247 11 - 23 37 624
6 - 30 45 87021 - 45 60 566 3 - 15 33 145
11 - 23 42 392 6 - 30 49 348
11 - 23 3 - 15 29 23221 - 45 60 841 11 - 23 37 551
6 - 30 45 53721 - 45 60 363 3 - 15 33 87
11 - 23 42 421 6 - 30 49 218
21 - 45 60 551 3 - 15 29 145 11 - 23 37 609 6 - 30 45 348
21 - 45 60 218 3 - 15 33 58 11 - 23 42 261 6 - 30 49 131
21 - 45 60 319 3 - 15 29 87 11 - 23 37 392 6 - 30 45 203
Return to US Units Index
-
PH3000 - 03/0241005 Series
10US Units
VALVE AIR TO OPEN AIR TO CLOSESIZE inches (mm)
ANSI class
Notes: 1. Inlet pressure must not exceed the ANSI rating for the selected pressure class.2. Allowable pressure drops are based on dynamic stability calculations.3. See CH3000 for orifice size to obtain rated Cv.4. Allowable pressure drops are applicable for both Class IV and Class V leakage.
Allowable Pressure Drops for 41405 Series (US)Air to Open and Air to Close, Flow to Close
Pilot Balanced ConstructionStandard Trim with 37/38 Spring-Diaphragm & 84/85/86 Cylinder ActuatorsModels 41415 and 41425Body Rating: ANSI Class 150 to 1500Leakage: Per IEC 534-4 and ANSI/FCI 70.2, Class IV (Class V Optional)PTFE Packing
Travel LIN CvACTUATOR
SIZEACTUATOR
SIZEBenchrange
SUPPLYAllow.Delta P Bench
rangeSUPPLY
Allow.Delta P% Cv
150/600 900/1500 inches psi psi psi psi
189 - 41 59 754
187 - 38 56 653
10 - 50 60 218 4 - 45 60 377
249 - 44 60 957
246 - 40 55 798
10 (250) 10 (250) 3.0 1000 900 6 - 40 59 1247 4 - 50 60 522
15415 - 22 60 1107
15415 - 22 60 844
25 - 37 60 1247 25 - 37 60 1027
31412 - 18 60 1339
31412 - 18 60 1407
25 - 37 60 2215 25 - 37 60 1877
189 - 28 40 276
186 - 27 44 348
3 - 45 60 174
2411 - 50 60 203
246 - 28 42 493
12 (300) 12 (300) 3.75 1400 1260 6 - 28 42 522 3 - 25 38 232
15415 - 24 60 916
15415 - 24 60 570
25 - 40 60 832 25 - 40 60 855
31412 - 19 60 1785
31412 - 19 60 949
25 - 40 53 1376 25 - 40 53 1569
15415 - 25 60 605
15415 - 25 60 364
4.0 2000 25 - 42 60 517 25 - 42 60 567
31412 - 20 60 1179
31412 - 20 60 606
16 (400) 16 (400) 25 - 42 53 856 25 - 42 53 1042
15415 - 28 60 636
15415 - 28 60 403
5.0 2500 225025 - 46 60 518 25 - 46 60 612
31412 - 22 60 1236
31412 - 22 60 669
25 - 46 53 856 25 - 46 53 1130
Return to US Units Index
-
PH3000 - 03/0241005 Series
11US Units
PH3000 - 03/0241005 Series
Pilot Balanced ConstructionSingle Stage Lo-dB/Anti-Cavitation Trim (including Diffuser)with 37/38 Spring-Diaphragm & 84/85/86 Cylinder ActuatorsModels 41435 and 41445Body Rating: ANSI Class 150 to 1500Leakage: Per IEC 534-4 and ANSI/FCI 70.2, Class IV (Class V Optional)PTFE Packing
Allowable Pressure Drops for 41405 Series (US)Air to Open and Air to Close, Flow to Close
VALVE AIR TO OPEN AIR TO CLOSESIZE inches (mm)
ANSI classACTUATOR
SIZEACTUATOR
SIZEBenchrange
SUPPLYAllow.Delta P Bench
rangeSUPPLY
Allow.Delta P
Travel Cv Lo-dB
Notes: 1. Inlet pressure must not exceed the ANSI rating for the selected pressure class.2. Allowable pressure drops are based on dynamic stability calculations.3. See CH3000 for orifice size to obtain rated Cv.4. Allowable pressure drops are applicable for both Class IV and Class V leakage.
150/600 900/1500 inches psi psi psi psi
189 - 41 55 1001
185 - 46 60 943
10 - 40 53 914 10 - 43 60 103024 6 - 40 55 1668 24 6 - 40 55 1537
8 (200) 8 (200) 3.0 500154
15 - 22 60 1562154
15 - 22 60 117125 - 37 60 1759 25 - 37 60 1449
31412 - 18 60 3054
31412 - 18 60 1952
25 - 37 53 3075 25 - 37 53 2648
1814 - 30 38 261
186 - 30 47 566
13 - 27 34 218 5 - 43 60 580
249 - 30 40 638
246 - 30 44 798
10 (250) 10 (250) 3.5 650 12 - 48 60 653 7 - 28 42 653520
15415 - 24 60 893
15415 - 24 60 1225
25 - 40 60 1141 25 - 40 60 1339
31412 - 19 60 1488
31412 - 19 60 2391
25 - 40 53 2089 25 - 40 53 2215
1812 - 30 41 276
186 - 30 48 435
10 - 34 49 435 24 6 - 30 45 638 24 6 - 30 45 624
4.0 840154
15 - 25 60 986154
15 - 25 60 58625 - 42 60 832 25 - 42 60 925
12 (300) 12 (300)314
12 - 20 60 1920314
12 - 20 60 97425 - 42 53 1376 25 - 42 53 1698
15415 - 27 60 1078
15415 - 27 60 647
5.0 110025 - 46 60 832 25 - 46 60 1098
31412 - 22 60 2215
31412 - 22 60 1075
25 - 46 53 1376 25 - 46 53 2026
1812 - 30 42 189
186 - 30 48 261
10 - 34 51 305 24 6 - 30 47 464 24 6 - 30 45 363
4.01030
15415 - 25 60 523
15415 - 25 60 364
136025 - 42 60 518 25 - 42 60 571
31412 - 20 60 606
31412 - 20 60 486
16 (400) 16 (400)25 - 42 53 606 25 - 42 53 486
15415 - 30 60 663
15415 - 30 60 441
6.0 180025 - 50 60 518 25 - 50 60 714
31412 - 24 60 762
31412 - 24 60 604
25 - 50 53 762 25 - 50 53 604
Return to US Units Index
-
PH3000 - 03/0241005 Series
12US Units
Pilot Balanced ConstructionStandard TrimModels 41415 and 41425Body Rating: ANSI Class 150 to 1500Leakage: Per IEC 534-4 and ANSI/FCI 70.2, Class IV (Class V Optional)Flexible Graphite Packing
11 - 23 33 42121 - 45 59 82711 - 23 30 69621 - 45 58 13926 - 30 42 2219
11 - 23 30 11176 - 30 42 3190
11 - 23 30 159511 - 23 32 40621 - 45 58 81211 - 23 30 66721 - 45 57 13496 - 30 41 2146
11 - 23 29 107311 - 23 30 46421 - 45 58 92811 - 23 30 74021 - 45 58 14796 - 30 41 2132
11 - 23 29 105911 - 23 30 45021 - 45 58 89911 - 23 30 71121 - 45 58 14366 - 30 41 2059
11 - 23 29 1030
21 - 45 58 1015
11 - 23 30 74021 - 45 58 146521 - 45 57 972
11 - 23 29 69621 - 45 57 140721 - 45 58 870
11 - 23 30 62421 - 45 58 124711 - 23 21 - 45 58 81221 - 45 57 1175
3 - 15 6 - 30 44 3343 - 15 23 1316 - 30 41 10733 - 15 22 7256 - 30 39 1726
3 - 15 6 - 30 44 4933 - 15 23 2036 - 30 41 13203 - 15 22 10446 - 30 39 21033 - 15 26 736 - 30 42 6823 - 15 23 4356 - 30 39 12623 - 15 22 8566 - 30 39 18273 - 15 26 736 - 30 42 6823 - 15 23 4356 - 30 39 12623 - 15 22 8566 - 30 39 1827
21 - 45 55 20593 - 15 28 1606 - 30 45 8563 - 15 25 4646 - 30 42 13053 - 15 28 1896 - 30 45 9723 - 15 25 5516 - 30 42 14073 - 15 28 1316 - 30 45 6673 - 15 25 3636 - 30 42 11023 - 15 28 1316 - 30 45 6673 - 15 25 3636 - 30 42 1102
21 - 45 58 1175
2 (50) 0.8
2 (50) 1.5
3 (80) 3 (80) 2.0
4 (100) 4 (100) 2.0
40 35 14
16
75 65 26
30
155 140 56
60
240 225 90
95
6
10
16
23
6
10
16
10
16
23
10
16
23
16
23
16
23
16
23
16
23
Allowable Pressure Drops for 41405 Series (US)Air to Open and Air to Close, Flow to Close
Notes: 1. Inlet pressure must not exceed the ANSI rating for the selected pressure class.2. Allowable pressure drops are based on dynamic stability calculations.3. See CH3000 for orifice size to obtain rated Cv.4. Allowable pressure drops are applicable for both Class IV and Class V leakage.
VALVE AIR TO OPEN AIR TO CLOSESIZE inches (mm)
ANSI class150/600 900/1500
ActuatorSize Bench
rangeBenchrange
Travel
inches
LINCv factor
1 0.4
Equal %Cv factor
1 0.4
Supply
psi
Allow.Delta P
psi
Supply
psi
Allow.Delta P
psi
Return to US Units Index
-
PH3000 - 03/0241005 Series
13US Units
Pilot Balanced ConstructionStandard TrimModels 41415 and 41425Body Rating: ANSI Class 150 to 1500Leakage: Per IEC 534-4 and ANSI/FCI 70.2, Class IV (Class V Optional)Flexible Graphite Packing
21 - 45 59 812
11 - 23 33 87021 - 45 59 116021 - 45
21 - 45 59 377
11 - 23 42 870
21 - 45 59 218
21 - 45 59 783
21 - 45 59 15
21 - 45 59 348
21 - 45
21 - 45 59 58
21 - 45
21 - 45 59 29
21 - 45
3 - 15 6 - 30 45 3633 - 15 26 1606 - 30 42 6963 - 15
11 - 23 44 1893 - 15
11 - 23 38 3773 - 15 26 58
11 - 23 35 6093 - 15 6 - 30 49 1023 - 15 6 - 30 45 3193 - 15
11 - 23 42 2033 - 15
11 - 23 38 3483 - 15 6 - 30 49 29
11 - 23 42 1313 - 15 6 - 30 45 87
11 - 23 38 2326 - 30 49 15
11 - 23 42 876 - 30 45 58
11 - 23 38 1606 - 30 45 29
11 - 23 38 87
6 (150) 6 (150)
2.0
1.5
8 (200) 8 (200)
2.5
1.5
10 (250) 10 (250) 1.5
12 (300) 12 (300) 2.0
16 (400) 16 (400) 2.5
400 360 144
165
640 575 230
415
510
770
1280
16
23
10
16
23
16
23
16
23
16
23
23
23
16
Allowable Pressure Drops for 41405 Series (US)Air to Open and Air to Close, Flow to Close
VALVE AIR TO OPEN AIR TO CLOSESIZE inches (mm)
ANSI class150/600 900/1500
ActuatorSize Bench
rangeBenchrange
Travel
inches
LINCv factor
1 0.4
Equal %Cv factor
1 0.4
Notes: 1. Inlet pressure must not exceed the ANSI rating for the selected pressure class.2. Allowable pressure drops are based on dynamic stability calculations.3. See CH3000 for orifice size to obtain rated Cv.4. Allowable pressure drops are applicable for both Class IV and Class V leakage.
Supply
psi
Allow.Delta P
psi
Supply
psi
Allow.Delta P
psi
Return to US Units Index
-
PH3000 - 03/0241005 Series
14US Units
Allowable Pressure Drops for 41405 Series (US)Air to Open and Air to Close, Flow to Close
Pilot Balanced ConstructionSingle Stage Lo-dB/Anti-Cavitation Trim (including Diffuser)Models 41435 and 41445Body Rating: ANSI Class 150 to 1500Leakage: Per IEC 534-4 and ANSI/FCI 70.2, Class IV (Class V Optional)Flexible Graphite Packing
Notes: 1. Inlet pressure must not exceed the ANSI rating for the selected pressure class.
2. Allowable pressure drops are based on dynamic stability calculations.
3. See CH3000 for orifice size to obtain rated Cv.4. Allowable pressure drops are applicable for both Class IV and Class V leakage.
VALVE AIR TO OPEN AIR TO CLOSESIZE inches (mm)
ANSI class Travel Cv Lo-dBACTUATOR
SIZEBenchrange SUPPLY
Allow.Delta P
Benchrange SUPPLY
Allow.Delta P
2 (50)
1013172330
6
16
23
16
23
16
23
16
23
16
23
16
23
16
23
16
23
10
10
16
2 (50)
3 (80) 3 (80)
4 (100) 4 (100)
6 (150) 6 (150)
8 (200) 8 (200)
10 (250) 10 (250)
12 (300) 12 (300)
16 (400) 16 (400)
2532435872
100130175230300
165220290380
225290390
480630
780
6585110150195
40547295125
150/600 900/1500 inches psi psi psi psi
11 - 23 32 406 11 - 23 36 40621 - 45 58 812 6 - 30 44 49311 - 23 30 682 3 - 15 23 20321 - 45 58 1363 11 - 23 32 682
6 - 30 41 13206 - 30 41 2175 3 - 15 22 1044
11 - 23 29 1088 6 - 30 39 210311 - 23 30 450 3 - 15 26 7321 - 45 58 899 11 - 23 35 450
6 - 30 42 68211 - 23 30 725 3 - 15 23 43521 - 45 58 1450 11 - 23 32 725
6 - 30 39 12626 - 30 41 2074 3 - 15 22 856
11 - 23 29 1044 11 - 23 30 1044 6 - 30 39 1827
21 - 45 57 986 3 - 15 28 160 11 - 23 36 493 21 - 45 61 986
11 - 23 29 711 3 - 15 25 55121 - 45 58 1421 11 - 23 33 711
6 - 30 42 142121 - 45 58 841 3 - 15 28 131
11 - 23 36 421 6 - 30 45 667
11 - 23 30 595 3 - 15 25 36321 - 45 58 1204 11 - 23 33 595
6 - 30 42 110221 - 45 59 972 11 - 23 38 595
6 - 30 45 47911 - 23 32 856 3 - 15 26 20321 - 45 58 1407 11 - 23 35 856
6 - 30 42 89921 - 45 59 479 11 - 23 42 435
6 - 30 49 14511 - 23 11 - 23 38 62421 - 45 59 957 6 - 30 45 43521 - 45 59 290 11 - 23 42 392
6 - 30 49 8711 - 23 11 - 23 38 55121 - 45 59 682 6 - 30 45 27621 - 45 59 189 11 - 23 42 276
6 - 30 49 5821 - 45 59 479 11 - 23 38 493
6 - 30 45 17421 - 45 59 116 11 - 23 42 160
6 - 30 49 2921 - 45 59 218 11 - 23 38 290
6 - 30 45 102
0.8
1.5
2.0
2.0
2.5
2.5
2.5
2.5
2.5
Return to US Units Index
-
PH3000 - 03/0241005 Series
15US Units
Pilot Balanced ConstructionStandard Trim with 37/38 Spring-Diaphragm & 84/85/86 Cylinder ActuatorsModels 41415 and 41425Body Rating: ANSI Class 150 to 1500Leakage: Per IEC 534-4 and ANSI/FCI 70.2, Class IV (Class V Optional)Flexible Graphite Packing
9 - 41 60 60910 - 50 9 - 44 60 7836 - 40 60 1102
15 - 22 60 110225 - 37 60 114612 - 18 60 216125 - 37 60 20169 - 28 44 276
11 - 50 60 736 - 28 45 522
15 - 24 60 91425 - 40 60 71112 - 19 60 178425 - 40 54 126215 - 25 60 59525 - 42 60 45012 - 20 60 117525 - 42 54 78315 - 28 60 59525 - 46 60 45012 - 22 60 117525 - 46 54 783
7 - 38 57 4354 - 45 60 1606 - 40 55 5804 - 50 60 305
15 - 22 60 65325 - 37 60 103012 - 18 60 121825 - 37 60 18716 - 27 44 2183 - 45 60 446 - 28 42 3633 - 25 38 102
15 - 24 60 45025 - 40 60 85612 - 19 60 82725 - 40 54 156615 - 25 60 29025 - 42 60 55112 - 20 60 53725 - 42 54 104415 - 28 60 33425 - 46 60 60912 - 22 60 59525 - 46 54 1131
10 (250) 10 (250) 3.0
12 (300) 12 (300) 3.75
5.0
1000 900 360
1400 1260 500
16 (400) 16 (400)
4.0 2000
2500 2250 900
18
24
154
314
18
24
154
314
314
154
314
154
Allowable Pressure Drops for 41405 Series (US)Air to Open and Air to Close, Flow to Close
Notes: 1. Inlet pressure must not exceed the ANSI rating for the selected pressure class.2. Allowable pressure drops are based on dynamic stability calculations.3. See CH3000 for orifice size to obtain rated Cv.4. Allowable pressure drops are applicable for both Class IV and Class V leakage.
VALVE AIR TO OPEN AIR TO CLOSESIZE inches (mm)
ANSI class150/600 900/1500
ActuatorSize Bench
rangeBenchrange
Travel
inches
LINCv factor1 0.4
Equal %Cv factor
1 0.4
Supply
psi
Allow.Delta P
psi
Supply
psi
Allow.Delta P
psi
Return to US Units Index
-
16 (400) 16 (400)
PH3000 - 03/0241005 Series
16US Units
Pilot Balanced ConstructionSingle Stage Lo-dB/Anti-Cavitation Trim (including Diffuser)with 37/38 Spring-Diaphragm & 84/85/86 Cylinder ActuatorsModels 41435 and 41445Body Rating: ANSI Class 150 to 1500Leakage: Per IEC 534-4 and ANSI/FCI 70.2, Class IV (Class V Optional)Flexible Graphite Packing
9 - 41 58 100110 - 40 57 9146 - 40 58 1668
15 - 22 60 114625 - 37 60 147912 - 18 60 123325 - 37 54 123314 - 30 42 26113 - 27 38 2189 - 30 42 638
12 - 48 60 52215 - 24 60 121825 - 40 60 114612 - 19 60 239325 - 40 54 201612 - 30 45 27610 - 34 52 4356 - 30 48 638
15 - 25 60 95725 - 42 60 71112 - 20 60 191425 - 42 54 126215 - 27 60 95725 - 46 60 71112 - 22 60 221925 - 46 54 126212 - 30 46 18910 - 34 55 3056 - 30 51 464
15 - 25 60 52225 - 42 60 45012 - 20 60 60925 - 42 54 60915 - 30 60 59525 - 50 60 45012 - 24 60 76925 - 50 54 769
5 - 46 60 50810 - 43 60 10306 - 40 55 1102
15 - 22 60 89925 - 37 60 145012 - 18 60 168225 - 37 54 26546 - 30 48 4215 - 43 60 3056 - 30 44 7117 - 28 42 653
15 - 24 60 69625 - 40 60 114612 - 19 60 129125 - 40 54 20886 - 30 48 261
6 - 30 45 45015 - 25 60 46425 - 42 60 87012 - 20 60 85625 - 42 54 169715 - 27 60 52225 - 46 60 97212 - 22 60 95725 - 46 54 20306 - 30 48 160
6 - 30 45 26115 - 25 60 29025 - 42 60 55112 - 20 60 49325 - 42 54 49315 - 30 60 36325 - 50 60 66712 - 24 60 60925 - 50 54 609
8 (200) 8 (200) 3.0 500
520650
840
1100
10301360
1800
10 (250) 10 (250) 3.5
5.0
4.0
6.0
4.0
18
24154
314
18
24
154
314
314
154
314
154
314
154
314
154
24
24
18
18
Allowable Pressure Drops for 41405 Series (US)Air to Open and Air to Close, Flow to Close
Notes: 1. Inlet pressure must not exceed the ANSI rating for the selected pressure class.2. Allowable pressure drops are based on dynamic stability calculations.3. See CH3000 for orifice size to obtain rated Cv.4. Allowable pressure drops are applicable for both Class IV and Class V leakage.
VALVE AIR TO OPEN AIR TO CLOSESIZE inches (mm)
ANSI class150/600 900/1500
ActuatorSize Bench
rangeBenchrange
Travel
inchesCv Lo-dB
12 (300) 12 (300)
Supply
psi
Allow.Delta