Post on 19-Jul-2020
11
An exciting range of interior and exterior LED strip lights, ideal for residential and commercial environments, with Smart technology.
LED STRIP LIGHTS
270 271270
An exciting range of interior and exterior LED strip lights, ideal for residential and commercial environments, with Smart technology.
LED STRIP LIGHTS
270 271271
Bluetooth Lighting control technology can save the installer time when creating multi-switch control lighting circuits by using the innovative SAL PIXIE Multifunction control or the SAL PIXIE Multifunction remote control? Check out the wiring diagrams of the SAL PIXIE Multifunction controls to see how simple it is to save time and money with multifunction switch circuits.Need more information on Bluetooth Technology? Check out the SAL web FAQ’s or speak to your local SAL team member.
DID
YOU KNOW?
?
P274 RANGE INTRODUCTION P278 WHITE FLP12V2M/5M/S P280 COLOUR IP44 FL1206/S
P281 RGB FLP12V5MRGB P282 WHITE FL2406/R05 P284 WHITE FL2406/SS10 P285 WHITE FL2412/SS10 P286 WHITE FLL2406/SS10
P287 WHITE FLL2412/SS10R9 P290 WHITE SMART FLP12V/SBT P291 RGB SMART FLP12V/RGBBT P292 RGB FL2415RGB/S P293 WHITE FLH2420
P294 QUICK CONNECT KIT P296 NEON SIDE - FLN2407 P297 NEON TOP - FLN2410 P298 NEON BEND - RGB FLN2412 P300 CHANNEL SLT1000
P301 SLT3000 CHANNEL SERIES P302 CHANNEL SLT3040, SLT3050 P303 CHANNEL SLT4050, SLT4060 P304 CHANNEL SLT5000, SLT6010 P305 CHANNEL SLT6000, SLT6050
P306 CONTROL LT8913 DIM P308 CONTROL LT8913 RGB P310 REPEATER LT8914 DIM/RP P312 REPEATER LT8914 RGB/RP P314 CONTROL LT8915 DIM
P316 CONTROL LT8915 RGB P318 CONTROL LT8915DIM/BT P320 CONTROL LT8915RGB/BT
For Interior products, the designated IP rating is “from below the ceiling” unless otherwise specified.
P277 WHITE IP67 FL1209/SRP276 WHITE IP44 FL1209/S
272 273272
P274 RANGE INTRODUCTION P278 WHITE FLP12V2M/5M/S P280 COLOUR IP44 FL1206/S
P281 RGB FLP12V5MRGB P282 WHITE FL2406/R05 P284 WHITE FL2406/SS10 P285 WHITE FL2412/SS10 P286 WHITE FLL2406/SS10
P287 WHITE FLL2412/SS10R9 P290 WHITE SMART FLP12V/SBT P291 RGB SMART FLP12V/RGBBT P292 RGB FL2415RGB/S P293 WHITE FLH2420
P294 QUICK CONNECT KIT P296 NEON SIDE - FLN2407 P297 NEON TOP - FLN2410 P298 NEON BEND - RGB FLN2412 P300 CHANNEL SLT1000
P301 SLT3000 CHANNEL SERIES P302 CHANNEL SLT3040, SLT3050 P303 CHANNEL SLT4050, SLT4060 P304 CHANNEL SLT5000, SLT6010 P305 CHANNEL SLT6000, SLT6050
P306 CONTROL LT8913 DIM P308 CONTROL LT8913 RGB P310 REPEATER LT8914 DIM/RP P312 REPEATER LT8914 RGB/RP P314 CONTROL LT8915 DIM
P316 CONTROL LT8915 RGB P318 CONTROL LT8915DIM/BT P320 CONTROL LT8915RGB/BT
For Interior products, the designated IP rating is “from below the ceiling” unless otherwise specified.
P277 WHITE IP67 FL1209/SRP276 WHITE IP44 FL1209/S
272 273
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
LED STRIP RANGE
12V Low voltage LED strip
12V Low voltage LED strip kit
12V Low voltage Smart LED strip kit
24V Low voltage LED strip
Type
Type
Type
Type
FL1209/S
FLP12V2M/S
FLP12V2M/SBT
FL2406/R05
WW: Warm White - 3000K, CW- Cool White - 4000K, NDL: Neutral Daylight - 5000K, DL: Daylight - 6000KRGB: Colour Selectable
FL1209/SR
FLP12V5M/S
FLP12V5M/SBT
FL2406/SS10
FL1206/S
FLP12V5M/RGB
FLP12V2M/RGBBT
FL2412/SS10
FLP12V5M/RGBBT
FLH2420
FL2415RGB/S
FLL2406/SS10
FLL2406/SS10R9
Voltage
Voltage
Voltage
Voltage
CCT / Colour
CCT / Colour
CCT / Colour
CCT / Colour
IP Rating
IP Rating
IP Rating
IP Rating
Width (mm)
Width (mm)
Width (mm)
Width (mm)
Power(W/m)
Power(W/m)
Power(W/m)
Power(W/m)
12V DC
12V DC
12V DC
24V DC
12V DC
12V DC
12V DC
24V DC
12V DC
12V DC
12V DC
24V DC
12V DC
24V DC
24V DC
24V DC
24V DC
WW, CW, DL
WW, NDL
WW, NDL
WW, NDL, BLUE
WW, CW, DL
WW, NDL
WW, NDL
WW, CW, DL
Red, Green, Blue
RGB
RGB
WW, CW, DL
RGB
WW, CW, DL
RGB
WW, CW, DL
WW, CW, DL
9
6
6
6
9
6
6
6
6
6
6
12
6
20
15
6
12
IP44
IP44
IP44
IP20
IP67
IP44
IP44
IP65
IP44
IP44
IP44
IP65
IP44
IP20
IP44
IP65
IP65
10
8
8
5
12
8
8
10
10
10
10
10
10
8
10
10
10
Roll Length (m)
Roll Length (m)
Roll Length (m)
Roll Length (m)
5
2
2
30
5
5
5
20
5
5
2
20
5
5
6
20
20
274 275
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
SINGLE WHITE COLOUR LED STRIP DIMMING WIRINGDIAGRAM TYPE A (TRAILING EDGE)
RF remotecontroller
Max. run as per strip rating
Max. run as per strip rating
Max. run as per strip rating
Trailing edge dimmer
240V~
+–
DIMMABLE CONSTANT VOLTAGE
LED DRIVER (TRAILING EDGE)
(n)
(n)
(1)
(1)
L N
+–
DIMMABLE CONSTANT VOLTAGE
LED DRIVER (TRAILING EDGE)
Max. Load refer to Driver
Max. Load refer to Driver
TYPE B (LED CONTROLLER)
N240V~
L
(n)
(1)
CONSTANT VOLTAGE
LED DRIVER+ –
LOW VOLTAGE LED
CONTROLLER+–
+ –
Max. Load refer to Controller
TYPE C (1 – 10V)
(n)
(n)
(1)
(1)
L240V~
N1-10V Dimming Controller eg. SDF30
+–
+–
DIMMABLE CONSTANT VOLTAGE
LED DRIVER (1 – 10V)
DIMMABLE CONSTANT VOLTAGE
LED DRIVER (1 – 10V)
Max. Load refer to Driver
Max. Load refer to Driver
RGB LED STRIP WIRING DIAGRAM
RF remotecontroller
Max. run as per strip rating
(1)
+RGB
(n)
L240V~
N
CONSTANT VOLTAGE LED DRIVER
24V
RGB LED CONTROLLER
Max. Load refer to Controller
274 275
PLUS
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Application
Design Specifications
Dimensions
12V LV WHITE COLOUR LED STRIP IP44 FL1209/S - 9W/M Versatile IP44 LED Single colour white strips
• High efficiency SMD LED chips, with3M self adhesive tape, silicon covered
• Max run per driver 5m, cuttable every25mm, dimmable with compatible drivers
• Heat sink and 12V constant voltagedriver required
• Dimming options: (wiring refer page 275)Type A - Trailing edge dimming,Type B - LED controller LT8913DIM,
LT8915DIM and LT8914DIM/RP, LT8915DIM/BT
Type C - analogue 1-10V• Channel options refer pages 299-305
Technical Specifications
Model No.
FL1209WW/S
FL1209CW/S
FL1209DL/S
Input(V)
Power(W/m) CCT (K) CRI Beam
AngleCuttableLength
Lumen(lm/m)
12V DC
12V DC
12V DC
9
9
9
600
600
600
3000
4000
6000
> 80
> 80
> 80
115º 25 mm
115º 25 mm
115º 25 mm
10 x 3
10 x 3
10 x 3
DimensionsW x H (mm)
LEDQuantity
120p/m
120p/m
120/pm
Versatile IP44 LED white colour strips, ideal for residential features
25 mm
L
W
3M TAPE
Silicon Cover
LED Circuit
H
PerformanceDimmable - OptionalDimmer Type - Refer Dimming Options
276 277
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Application
Design Specifications
Dimensions
12V LV WHITE COLOUR LED STRIP IP67 FL1209/SR - 9W/MVersatile IP67 LED Single colour white strips
Technical Specifications
PerformanceDimmable - OptionalDimmer Type - Refer Dimming Options
IP67
Model No.
FL1209WW/SR
FL1209CW/SR
FL1209DL/SR
Input(V)
Power(W/m) CCT (K) CRI Beam
AngleCuttableLength
Lumen(lm/m)
12V DC
12V DC
12V DC
9
9
9
500
500
500
3000
4000
6000
> 80
> 80
> 80
115º 25 mm
115º 25 mm
115º 25 mm
12 x 4.5
12 x 4.5
12 x 4.5
DimensionsW x H (mm)
LEDQuantity
120p/m
120p/m
120p/m
Exterior feature lighting, residential or commercial spaces
• High efficiency SMD LED chips, with3M self adhesive tape, silicon covered
• Max run per driver 5m, cuttable every25mm, dimmable with compatible drivers
• Heat sink and 12V constant voltagedriver required
• Dimming options: (wiring refer page 275)Type A - Trailing edge dimming,Type B - LED controller LT8913DIM,
LT8915DIM and LT8914DIM/RP, LT8915DIM/BT
Type C - analogue 1-10V• Channel options refer pages 299-305
25 mm
L
W
3M TAPE
Silicon Cover
LED Circuit
H
276 277
PLUS
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Application
Design Specifications
Dimensions
FLP12V2M/S - 6W/MSingle white colour 12V low voltage LED strip KIT 2m
• 12V weatherproof LED flexible strip with3M self-adhesive tapes at back
• Pre-wired strip kit includes IP20 LED driver,LED strip & 1.2 m flex & 2 pin plug
• Plug & play ready to use• High efficiency SMD LED chips,
beam angle 115°• Choice of 3000K or 5000K• Stable working performance and even
light output, heatsink recommended• Cuttable every 50 mm at the scissors
symbol, 2m kitsNOTE: when cutting LED strips, it is alwaysimportant to calculate the remaining LEDload to reconfirm its compatibility with theexisting driver, as driver changes may berequired with moderate reduction in loads.
• Channel options refer page 299-305
PerformanceDimmable Driver - No
Technical Specifications
Model No.
FLP12V2M/WW/S
FLP12V2M/NDL/S
Input(V/Hz)
Power(W/m)
CCT(K) CRI Beam
AngleCuttableLength
Lumen(lm/m)
240/50
240/50
6
6
300
300
3000
5000
> 80
> 80
115º 50 mm
115º 50 mm
2000 x 8 x 2.5
2000 x 8 x 2.5
DimensionsL x W x H (mm)
LEDQuantity
60p/m
60p/m
An creative solution for residential and commercial interior spaces
3M TAPE
Silicon Cover
LED Circuit
H
50 mm
L
W
278 279
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Application
Design Specifications
Dimensions
FLP12V5M/S - 6W/MSingle white colour 12V low voltage LED strip KIT 5m
• 12V weatherproof LED flexible strip with 3Mself-adhesive tapes at back
• Pre-wired strip kit includes IP20 LED driver,LED strip & 1.2 m flex & 2 pin plug
• Plug & play ready to use• High efficiency SMD LED chips,
beam angle 115°• Choice of 3000K or 5000K• Stable working performance and even
light output, heatsink recommended• Cuttable every 50 mm at the scissors symbol,
5m kitsNOTE: when cutting LED strips, it is alwaysimportant to calculate the remaining LEDload to reconfirm its compatibility with theexisting driver, as driver changes may berequired with moderate reduction in loads.
• Channel options refer page 299-305
PerformanceDimmable Driver - No
Technical Specifications
Model No.
FLP12V5M/WW/S
FLP12V5M/NDL/S
Input(V/Hz)
Power(W/m)
CCT(K) CRI Beam
AngleCuttableLength
Lumen(lm/m)
240/50
240/50
6
6
300
300
3000
5000
> 80
> 80
115º
115º
50 mm
50 mm
5000 x 8 x 2.5
5000 x 8 x 2.5
DimensionsL x W x H (mm)
LEDQuantity
60p/m
60p/m
An creative solution for residential and commercial interior spaces
3M TAPE
Silicon Cover
LED Circuit
H
50 mm
L
W
278 279
PLUS
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Technical Specifications
Application
Dimensions
12V LV SINGLE COLOUR LED STRIP IP44 FL1206/S - 6W/MAn innovative selection of cuttable single colour LED strips
Design Specifications• High efficiency SMD LED chips, with
3M self adhesive tape, silicon covered• Max run per driver 5m, cuttable every
50mm, dimmable with compatible drivers• Heat sink and 12V constant voltage
driver required• Dimming options: (wiring refer page 275)
Type A - Trailing edge dimming,Type B - LED controller LT8913DIM,
LT8915DIM and LT8914DIM/RP, LT8915DIM/BT
Type C - analogue 1-10V• Channel options refer pages 299-305
Model No.
FL1206RD/S
FL1206GN/S
FL1206BU/S
Input(V)
Power(W/m) Colour Wave length
(nm)BeamAngle
CuttableLength
Lumen(lm/m)
12V DC
12V DC
12V DC
6
6
6
120
220
60
Red
Green
Blue
115º 50 mm
115º 50 mm
115º 50 mm
10 x 3.5
10 x 3.5
10 x 3.5
DimensionsW x H (mm)
LEDQuantity
60p/m
60p/m
60p/m
Versatile single colour IP44 LED colour strips
PerformanceDimmable - OptionalDimmer Type - Refer Dimming Options
3M TAPE
Silicon Cover
LED Circuit
H
50 mm
L
W
R: 620~630
G: 520~530
B: 460~470
280 281
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Dimensions
12V LV RGB LED STRIP KIT IP44 FLP12V5MRGB - 6W/MA creative 12V 5m RGB weatherproof LED flexible strip kit
Design Specifications• Silicon covered 12V weatherproof LED
flexible strip with 3M self adhesive tape• Plug and play ready to use• 5m length, cuttable every 100mm at
designated cut lines. NOTE: when cuttingLED strips, it is always important to calculatethe remaining LED load to reconfirm itscompatibility with the existing driver, as driverchanges may be required with moderatereduction in loads
• Multi-function remote controller included• IP44 weatherproof strip, IP20 flex, plug & driver• Channel options refer pages 299-305
PerformanceDimmable Driver - YesDimmer Type - LED controller
Technical Specifications
Model No.
FLP12V5M/RGB
Input(V/Hz)
Power(W/m)
BeamAngle
CuttableLength
Wavelength(nm)
240/50 6R: 620~630G: 520~530B: 460~470
115º 100 mm 5000 x 10 x 3.5
DimensionsL x W x H (mm)
LEDQuantity
30p/m
ApplicationDecorative residential features, bar areas, kitchens and stairs
3M TAPE
Silicon Cover
LED Circuit
H
100 mm
L
W
280 281
PLUS
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Technical Specifications
Application
Design Specifications
FLEXI FL2406/R05 - 6W/M24V low voltage LED Strip IP20
• High efficiency SMD LED chips with 3Mself-adhesive tapes at back
• Roll length 30 m, run length maximum 5m,cuttable every 100 mm at scissors symbol
• Connection length can be extended bycertain LED drivers, controllers and repeaters
• Dimmable with compatible controller ordimmable constant voltage LED driver
• Dimming options: (wiring refer page 275)Type A - Trailing edge dimmerType B - LED Controller: LT8913DIM,
LT8915DIM, LT8915DIM/BT and LT8914DIM/RP
Type C - 1-10V analogue• Heat sink and 24V constant voltage
LED driver required• LED channel options refer pages 299-305
Model No.
FL2406WW/R05
FL2406NDL/R05
FL2406BU/R05
Input(V)
Power(W/m)
CCT(K) CRI Beam
AngleCuttableLength
Lumen(lm/m)
24V DC
24V DC
24V DC
6
6
6
460
460
85
3000
5000
Blue
> 80
> 80
—
115º 100 mm
115º 100 mm
115º 100 mm
5 x 1.4
5 x 1.4
5 x 1.4
DimensionsW x H (mm)
LEDQuantity
60p/m
60p/m
60p/m
An creative solution for residential and commercial interior spaces
PerformanceDimmable - OptionalDimmer Type - Refer Dimming Options
Dimensions
100 mm
L
W
IP20
SAL LED STRIPS,ARE AS FLEXIBLEAND COLOURFULAS YOUR IMAGINATION
Aspire Marsden Park NSW
3M tape
Silicon Coated
LED circuit
H
282 283
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
SAL LED STRIPS,ARE AS FLEXIBLEAND COLOURFULAS YOUR IMAGINATION
Aspire Marsden Park NSW
283282 283
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Application
Design Specifications
FLEXI FL2406/SS10 - 6W/MCRI> 80 24V low voltage LED Strip IP65
• High efficiency SMD LED chips with 3Mself-adhesive tapes at back, 6 watt/m
• Roll length 20m, maximum run 5m,cuttable every 100 mm at scissors symbol
• Connection length can be extended bycertain LED drivers, controllers & repeaters
• Dimmable with compatible controller ordimmable constant voltage LED driver;Dimming options: (wiring refer page 275)Type A - Trailing edge dimmerType B - LED Controller: LT8913DIM,
LT8915DIM, LT8915DIM/BT and LT8914DIM/RP
Type C - 1-10V analogue• Heat sink and 24V constant voltage
LED driver required• LED channel options refer pages 299-305
Technical Specifications
Model No.
FL2406WW/SS10
FL2406CW/SS10
FL2406DL/SS10
Input(V)
Power(W/m)
CCT(K) CRI Beam
AngleCuttableLength
Lumen(lm/m)
24V DC
24V DC
24V DC
6
6
6
500
500
500
3000
4000
6000
> 80
> 80
> 80
115º 100 mm
115º 100 mm
115º 100 mm
10 x 1.6
10 x 1.6
10 x 1.6
DimensionsW x H (mm)
LEDQuantity
60p/m
60p/m
60p/m
An creative solution for residential and commercial interior spaces
Dimensions
PerformanceDimmable - OptionalDimmer Type - Refer Dimming Options
3M tape
Silicon coatedLED circuit
H
100 mm
L
W
IP65
284 285
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Application
Design Specifications
FLEXI FL2412/SS10 - 12W/MCRI>80 24V low voltage LED Strip IP65
• High efficiency SMD LED chips with 3Mself-adhesive tapes at back, 12W/m
• Roll length 20m, maximum run length 5m,cuttable every 100 mm at scissors symbol
• Connection length can be extended bycertain LED drivers, controllers & repeaters
• Dimmable with compatible controller ordimmable constant voltage LED driver;Dimming options: (wiring refer page 275)Type A - Trailing edge dimmerType B - LED Controller: LT8913DIM ,
LT8915DIM, LT8915DIM/BT and LT8914DIM/RP
Type C - 1-10V analogue • Heat sink and 24V constant voltage
LED driver required• LED channel options refer pages 299-305
Technical Specifications
Model No.
FL2412WW/SS10
FL2412CW/SS10
FL2412DL/SS10
Input(V)
Power(W/m)
CCT(K) CRI Beam
AngleCuttableLength
Lumen(lm/m)
24V DC
24V DC
24V DC
12
12
12
980
980
980
3000
4000
6000
> 80
> 80
> 80
115º 100 mm
115º 100 mm
115º 100 mm
10 x 1.6
10 x 1.6
10 x 1.6
DimensionsW x H (mm)
LEDQuantity
60p/m
60p/m
60p/m
An creative solution for residential and commercial interior spaces
3M tape
Silicon coatedLED circuit
H
Dimensions
PerformanceDimmable - OptionalDimmer Type - Refer Dimming Options
100 mm
L
W
IP65
284 285
PLUS
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Application
Design Specifications
FLEXI FLL2406/SS10 - 6W/M20 metre length CRI> 80, 24V low voltage LED Strip IP65
• High efficiency SMD LED chips with 3Mself-adhesive tapes at back, 6 watt/m
• Roll length 20m, maximum run per driver 20m,cuttable every 100 mm at scissors symbol
• Connection length can be extended by certain LED drivers, controllers & repeaters
• Dimmable with compatible controller or dimmable constant voltage LED driver; Dimming options: (refer wiring page 275) Type A - Trailing edge dimmer Type B - LED Controller: LT8913DIM ,
LT8915DIM, LT8915DIM/BT and LT8914DIM/RP
Type C - 1-10V analogue• Heat sink and 24V constant voltage
LED driver required• LED channel options refre pages 299-305
Technical Specifications
Model No.
FLL2406WW/SS10
FLL2406CW/SS10
FLL2406DL/SS10
Input(V)
Power(W/m)
CCT(K) CRI Beam
AngleCuttableLength
Lumen(lm/m)
24V DC
24V DC
24V DC
6
6
6
500
500
500
3000
4000
6000
> 80
> 80
> 80
115º 100 mm
115º 100 mm
115º 100 mm
10 x 1.6
10 x 1.6
10 x 1.6
DimensionsW x H (mm)
LEDQuantity
60p/m
60p/m
60p/m
An creative solution for residential and commercial interior spaces
Dimensions
PerformanceDimmable - OptionalDimmer Type - Refer Dimming Options
100 mm
L
W
IP65
3M tape
Silicon coatedLED circuit
H
286 287
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Application
Design Specifications
FLEXI FLL2412/SS10R9 - 12W/M20 metre length CRI>90, 24V low voltage LED Strip IP65
• High efficiency SMD LED chips with 3Mself-adhesive tapes at back,12W/m, CRI>90
• Roll length 20m, maximum run length perdriver 20m, cuttable every 50 mm atscissors symbol
• Connection length can be extended bycertain LED drivers, controllers & repeaters
• Dimmable with compatible controller ordimmable constant voltage LED driver;Dimming options: (refer wiring page 275)Type A - Trailing edge dimmerType B - LED Controller: LT8913DIM ,
LT8915DIM, LT8915DIM/BT and LT8914DIM/RP
Type C - 1-10V analogue • Heat sink and 24V constant voltage
LED driver required• LED channel options refre pages 299-305
Technical Specifications
Model No.
FL2412WW/SS10R9
FL2412CW/SS10R9
FL2412DL/SS10R9
Input(V)
Power(W/m)
CCT(K) CRI Beam
AngleCuttableLength
Lumen(lm/m)
24V DC
24V DC
24V DC
12
12
12
980
980
980
3000
4000
6000
> 90
> 90
> 90
115º 50 mm
115º 50 mm
115º 50 mm
10 x 1.6
10 x 1.6
10 x 1.6
DimensionsW x H (mm)
LEDQuantity
120p/m
120p/m
120p/m
An creative solution for residential and commercial interior spaces
Dimensions
PerformanceDimmable - OptionalDimmer Type - Refer Dimming Options
50 mm
L
W
IP65
3M tape
Silicon coatedLED circuit
H
CRI>90
286 287
PLUS
SAL PIXIEAN AFFORDABLE CHOICE FOR HOME LIGHTING AUTOMATION
288 289
SAL PIXIEAN AFFORDABLECHOICE FOR HOME LIGHTING AUTOMATION
288 289
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Technical Specifications
Application
Design Specifications
FLEXI SMART FLP12V/SBT, 2M, 5M2m and 5m smart lighting, white strip kits
• Smart LED strip kit• Dimmable via the remote included
or via the SAL PIXIE or PIXIE PLUS app• Dimming memory function, high
performance, stable, even light output• Pre wired for easy installation,
plug-in & ready to use• Cuttable every 50mm, 2m or 5m kits,
lumens shown are lm/m, strip power 6w/m.NOTE: when cutting LED strips, it is alwaysimportant to calculate the remaining LEDload to reconfirm its compatibility with theexisting driver, as driver changes may berequired with moderate reduction in loads.
• NOTE: Heatsink required
Model No.
FLP12V2M/WW/SBT
FLP12V2M/NDL/SBT
FLP12V5M/WW/SBT
FLP12V5M/NDL/SBT
Input(V)
Power(W/m)
CCT(K) CRI Beam
AngleCuttableLength
Lumen(lm/m)
12V DC
12V DC
12V DC
12V DC
6
6
6
6
350
350
350
350
3000
5000
3000
5000
> 80
> 80
> 80
> 80
115º 50 mm
115º 50 mm
115º
115º
50 mm
50 mm
2000 x 8 x 2.5
2000 x 8 x 2.5
5000 x 8 x 2.5
5000 x 8 x 2.5
DimensionsL x W x H (mm)
LEDQuantity
60p/m
60p/m
60p/m
60p/m
Home theatre, bar features, decorative task illumination demanding smart controls
Dimensions
3M tape
Silicon coverLED circuit
H
50 mm
L
W
PerformanceDimmable - YesDimmer Type - PIXIE or supplied controller
PLUS
290 291
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Application
Design Specifications
FLEXI SMART FLP12V/RGBBT, 2M, 5M2m and 5m RGB smart lighting LED strip kits
• Smart LED strip kit colour and brightnesscontrolled via the remote included or viathe SAL PIXIE or PIXIE PLUS
• Four different flashing modes with dimmingmemory function
• High performance, stable, even light output,pre wired for easy installation, plug-in & ready to use and cuttable every 100 mm. NOTE: when cutting LED strips, it is always important to calculate the remaining LED load to reconfirm its compatibility with the existing driver, as driver changes may be required with moderate reduction in loads
• Choice of 2m and 5m packs available,IP44 strip only
• NOTE: heatsink required for warranty andsystem performance
Technical Specifications
Model No.
FLP12V2M/RGBBT
FLP12V5M/RGBBT
Input(V)
Power(W/m)
BeamAngle
CuttableLength
240
240
5.4
5.4
115º 100 mm
115º 100 mm
2000 x 10 x 3
5000 x 10 x 3
DimensionsL x W x H (mm) LED Quantity
30p/m
30p/m
Home theatre, bar features, decorative task illumination demanding smart controls
3M tape
Silicon coverLED circuit
H
Dimensions
PerformanceDimmable - YesDimmer Type - PIXIE or supplied controller
PLUS
100 mm
L
W
290 291
PLUS
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Application
Design Specifications
FLEXI FL2415RGB/S - 15W/MRGB 24V low voltage LED Strip IP44
• High efficiency SMD LED chips with 3Mself-adhesive tape
• Roll length and maximum run length perdriver 6 m, cuttable every 100 mm atscissors symbol
• Connection length can be extended bycertain LED drivers, controllers and repeaters
• RGB colour changeable with compatiblecontroller LT8913RGB, LT8915RGB/BT
• Heat sink and 24V constant voltage LEDdriver required
• Suitable LED driver - refer cataloguesection “drivers”
• LED channel options refer pages 299-305
A creative solution for residential and commercial interior spaces
Dimensions
PerformanceDimmable - YesDimmer Type - Refer Dimming Options
Technical Specifications
Model No.
FL2415RGB/S
Input(V)
Power(W/m)
BeamAngle
CuttableLength
Wavelength(nm)
24V DC 15R: 620~630G: 520~530B: 460~470
115º 100 mm 10 x 3.5
DimensionsW x H (mm)
LEDQuantity
60p/m
L
W
100 mm
3M tape
Silicon coverLED circuit
H
292 293
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Application
Design Specifications
Dimensions
FLEXI FLH2420 - 20W/M24V low voltage, high ouptput LED Strip IP20
• High colour rendering with high outputgreater than 1500lm/m
• High efficiency SMD LED chips with 3Mself-adhesive tape
• Roll length 5 m, cuttable every 62.5 mmat scissors symbol
• Connection length can be extended bycertain LED drivers, controllers and repeaters
• Dimmable with compatible controller ordimmable constant voltage LED driver;Dimming options: (wiring refer page 275)Type A - Trailing edge dimmerType B - LED Controller: LT8913DIM ,
LT8915DIM and LT8914DIM/RPType C - 1-10V analogue
• Heat sink and 24V constant voltageLED driver required
• LED channel options refer pages 299-305
A creative solution for residential and commercial interior spaces
62.5 mm
L
W
PerformanceDimmable - OptionalDimmer Type - Refer Dimming Options
Technical Specifications
Model No.
FLH2420 WW
FLH2420 CW
FLH2420 DL
Input(V)
Power(W/m)
CCT(K) CRI Beam
AngleCuttableLength
Lumen(lm/m)
24V DC
24V DC
24V DC
20
20
20
1700
1800
2000
3000
4000
6000
> 80
> 80
> 80
115º 62.5 mm
115º 62.5 mm
115º 62.5 mm
8 x 2
8 x 2
8 x 2
DimensionsW x H (mm)
LEDQuantity
96p/m
96p/m
96p/m
IP20
3M tape
Silicon Coated
LED circuit
H
292 293
PLUS
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Design Specifications• FLC05CS - Twin 400mm fly lead to connect 5
mm strip (pack of 10), suits FL2406R05• FLC10CS - Twin 400mm fly lead to connect 10
mm strip (pack of 10), suits FL1206, FL1209/S, FL2406/SS10, FL2412/SS10, FLL2406/SS10, FLL2412/SS10R9
• FLC10SS - connector to join 10 mm strip (packof 5), suits FL1206, FL1209/S, FL2406/SS10, FL2412/SS10, FLL2406/SS10, FLL2412/SS10R9
Application
QUICK CONNECT KIT FLC05CS, FLC10CS, FLC10SSLED strip quick connect kit
A creative solution for residential and commercial interior spaces
Dimensions
FLC05CS
FLC10SS
IP20
9.5 mm 7.5 mm
5 mm
2.5
14.5 mm 8 mm
10 mm5 mm
14.5 mm 8 mm
10 mm5 mm
5 mm
10mm
10mm
COLOUR TEMPERATURE,THERE IS A DIFFERENCELighting is more than just brightness or lumens. Make sure youtake the time to select the right colour temperature to createthe best visual appearance; your eyes don’t tell lies!
3000K
2700K
2700K 4000K 6000K
6000K5000K
4000K
FLC10CS
294 295
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
COLOUR TEMPERATURE,THERE IS A DIFFERENCELighting is more than just brightness or lumens. Make sure youtake the time to select the right colour temperature to createthe best visual appearance; your eyes don’t tell lies!
3000K
2700K
2700K 4000K 6000K
6000K5000K
4000K
295294 295
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
NEON SIDE - BEND FLN2407 - 7W/MFlexible Neon Bend strip, 24V DC low voltage, IP66
ApplicationA very flexible solution for residential and commercial interior spaces
Technical Specifications
Model No.
FLN2407WW17
FLN2407CW17
FLN2407DL17
FLN2407YW17
FLN2407RD17
FLN2407GN17
FLN2407BU17
Input(V)
Power(W/m)
CCT(K) CRI Beam
AngleCuttableLength
Lumen(lm/m)
24V DC
24V DC
24V DC
24V DC
24V DC
24V DC
24V DC
7
7
7
7
7
7
7
500
520
500
45
45
180
50
3000
4000
6000
> 80
> 80
> 80
115º
115º
115º
115º
115º
115º
115º
50 mm
50 mm
50 mm
50 mm
50 mm
50 mm
50 mm
10000 x 10 x17
10000 x 10 x17
10000 x 10 x17
10000 x 10 x17
10000 x 10 x17
10000 x 10 x17
10000 x 10 x17
DimensionsL x W x H (mm)
LEDQuantity
120p/m
120p/m
120p/m
120p/m
120p/m
120p/m
120p/m
Design Specifications•
•
High efficiency SMD LED chips, luminous efficacy up to 40lm/W, beam distributionRoll length 10m, cuttable every 50mm at scissors symbol, OR cut to length byspecial order
• EPR standard compliant, with smoothcolour uniformity
• SIDE-BEND Blue, Green, Yellow, Red or White in3000K/4000K/6000K colour choices, CRI >80
• Driver ordered separately, power 7.2W/m,maximum run length per driver 10m
PerformanceDimmable Driver - OptionalDimmer Type - Refer driver specification
IP66 ta40
296 297
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
NEON TOP - BEND FLN2410 - 10W/M
Technical Specifications
Model No.
FLN2410WW1312T
Input(V)
Power(W/m)
CCT(K) CRI Beam
AngleCuttableLength
Lumen(lm/m)
24V DC 10 600 3000 > 80 115º 50 mm 10000 x 13 x12
DimensionsL x W x H (mm)
LEDQuantity
120p/m
Flexible Neon Bend strip, 24V DC low voltage, IP66
ApplicationA very flexible solution for residential and commercial interior spaces
Design Specifications• High efficiency SMD LED chips,
luminous efficacy up to 600lm/m, beamdistribution 115°
• Roll length 10M, cuttable every 50mm atscissors symbol, maximum run length perdriver 10m
• One bin with smooth colour uniformity,SDCM-3
• CCT 3000K, CRI >80• Class III silicon neon strip, driver ordered
separately, power 9.6W/m, 24V DC• Standard KIT includes; 10 x FLN1312MC
and 3 x FLN1312EC, or cut to length byspecial order
• Additional accessories include weatherproofconnectors, contact SAL customer service fororder details
PerformanceDimmable Driver - OptionalDimmer Type - Refer driver specification
IP66 ta40
296 297
PLUS
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
NEON BEND - RGB FLN2412 - 12W/MFlexible Neon Bend RGB strip, 24V DC low voltage, IP66
Design Specifications• High efficiency SMD LED chips, 12W/m,
beam distribution 115°• Roll length 5m, cuttable every 83mm at
scissors symbol• Maximum run per driver 5m• (TOP BEND) FLN2412RGB1312T KIT includes:
5 x FLN1312MC and 1 x FLN1312EC• (SIDE BEND) FLN2412RGB1217 KIT includes:
5 x FLN1217MC and 1 x FLN1217EC,or cut to length by special order
• Class III silicon strip, driver ordered separately,power 12W/m, 24V DC
ApplicationA very flexible solution for residential and commercial interior spaces
Technical Specifications
Model No.
FLN2412RGB1312T
FLN2412RGB1217
Input(V)
Power(W/m)
BeamAngle
CuttableLength
Wavelength(nm)
24V DC
24V DC
12
12
R: 620~630G: 520~530B: 460~470
115º
115º
83 mm
83 mm
5000 x 13 x 12
5000 x 12 x 17
DimensionsL x W x H (mm) LED
Top bend
Side bend
PerformanceDimmable Driver - OptionalDimmer Type - Refer driver specification
IP65IP66 ta40
298 299
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
SAL LED STRIP CHANNEL RANGESee the following pages for individual product specifications
Model No.
SLT1000
SLT1000/2M
SLT3000
SLT3000/2M
SLT3010
SLT3010/2M
SLT3020
SLT3020/2M
SLT3030
SLT3030/2M
SLT3040
SLT3050
SLT3050/2M
SLT4050
SLT4050/2M
SLT4060
SLT4060/2M
SLT5000
SLT5000/2M
SLT6000
SLT6000/2M
SLT6010
SLT6050
SLT6050/2M
Description Length
SURFACE MOUNTED CHANNEL
SURFACE MOUNTED CHANNEL
SQUARE CHANNEL
SQUARE CHANNEL
CLIP-ON CHANNEL TYPE 1
CLIP-ON CHANNEL TYPE 1
CLIP-ON CHANNEL TYPE 2
CLIP-ON CHANNEL TYPE 2
CLIP-ON CHANNEL TYPE 3
CLIP-ON CHANNEL TYPE 3
RECESSED CABINET CHANNEL
SURFACE MOUNTED CABINET CHANNEL
SURFACE MOUNTED CABINET CHANNEL
RECESSED UNIVERSAL CHANNEL
RECESSED UNIVERSAL CHANNEL
RECESSED TRIMLESS
RECESSED TRIMLESS
CORNER CHANNED
CORNER CHANNED
NARROW RECESSED CHANNEL
NARROW RECESSED CHANNEL
HANGING RAIL CHANNEL
TRIMLESS NARROW CHANNEL
TRIMLESS NARROW CHANNEL
1 m
2 m
1 m
2 m
1 m
2 m
1 m
2 m
1 m
2 m
1.2 m
1 m
2 m
1 m
2 m
1 m
2 m
1 m
2 m
1 m
2 m
1.2 m
1 m
2 m
10 mm
10 mm
10 mm
10 mm
10 mm
10 mm
10 mm
10 mm
10 mm
10 mm
10 mm
10 mm
10 mm
10 mm
10 mm
10 mm
10 mm
10 mm
10 mm
5 mm
5 mm
5 mm
5 mm
5 mm
Maximum Strip Width
298 299
PLUS
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Application
Design Specifications
Dimensions
LED STRIP CHANNEL SLT1000LED strip channel, surface mount
• Extruded aluminium body profile• Anodized silver finish• Clear reeded polycarbonate diffuser• PVC clips and end cap included• Standard lengths 1000mm or 2000mm• Product order code SLT1000, (1000mm)
Perfect for residential interior feature lighting
IP20
Technical Specifications
Model No.
SLT1000
Description
CHANNEL CURVED 20 x 17.5mm
17.5 mm
20 mm
13 mm
300 301
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Application
Design Specifications
Dimensions
SLT3000
SLT3010
SLT3020
SLT3030
SLT LED STRIP CHANNEL SLT3000/3010/3020/3030
IP20
Technical Specifications
Model No.
SLT3000
SLT3000/2M
SLT3010
SLT3010SLT3010/2M
SLT3020
SLT3020/2MSLT3020/2M
SLT3030
SLT3030/2M
Description
CHANNEL SQUARE 16 x 16mm 1m
CHANNEL SQUARE 16 x 16mm 2m
CHANNEL CLIP ON 10 x 19mm 1m
CHANNEL CLIP ON 10 x 19mm 2m
CHANNEL CLIP ON 19 x 19mm 1m
CHANNEL CLIP ON UNDERSHELF 1m
CHANNEL CLIP ON 19 x 19mm 2m
CHANNEL CLIP ON UNDERSHELF 2m
Multi installation options, LED strip channel
• Extruded aluminium body• Anodize silver finish• Opal polycarbonate diffuser• Supplied with end caps only• Standard channel length:
1 m or 2 m
An creative solution for residential and commercial interior spaces
16 mm
13 mm16 m
m
18 m
m
10 mm
15 m
m
19 m
m
16.5
mm
16.5
mm
19 mm
16 mm
16.5
mm
31 m
m
13 mm
300 301
PLUS
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Application
Design Specifications
Dimensions
SLT3040
SLT3050
SLT3040
SLT3050
SLT LED STRIP CHANNEL SLT3040, SLT3050
Technical Specifications
Model No.
SLT3040 CHANNEL 19 x 79.5mm 1.2m CABINET
SLT3050
SLT3050/2M
CHANNEL SM 39 x 9mm 1m CABINET
CHANNEL SM 39 x 9mm 2m CABINET
Low profile LED strip channel andcabinet channel
• Extruded aluminium body• Anodized silver finish• Opal polycarbonate diffuser• Supplied with PVC surface clips
and end caps (SLT3050)• Standard length channel
- SLT3050 1m or 2m
A creative solution for residential and commercial interior spaces
IP20
Description
75 mm
15 mm
16 m
m
9 mm
16 mm
39 mm
302 303
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Dimensions
ApplicationSLT4050
SLT4050
SLT4060
SLT4060
Design Specifications
SLT LED STRIP CHANNEL SLT4050, SLT4060Trimless profile LED strip channel
• Extruded aluminium body,trimless profile (SLT4060)
• Anodize silver finish• Opal polycarbonate diffuser• Supplied with end caps only
A creative solution for residential and commercial interior spaces
Technical Specifications
Model No.
SLT4060
SLT4060/2
CHANNEL TRIMLESS 17.5 x 8.0mm 1m
CHANNEL TRIMLESS 17.5 x 8.0mm 2m
IP20
21 mm
16 mm
17.5 mm
8.5 mm
10 m
m
8 mm13 mm
SLT4050
SLT4050/2
CHANNEL WINGED 21x10.0mm 1m
CHANNEL WINGED 21x10.0mm 2m
Description
302 303
PLUS
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Application
Design Specifications
SLT LED STRIP CHANNEL SLT5000, SLT6010Profile shaped corner LED strip channel,and LED strip channel
• Extruded aluminium body• Anodize silver finish• Opal polycarbonate diffuser• Supplied with PVC clips and end
caps (SLT5000 ony)
A creative solution for residential and commercial interior spaces
10 mm16 m
m
IP20
SLT5000
SLT5000
SLT6010
SLT6010
Dimensions
Technical Specifications
Model No.
SLT5000
SLT5000/2
Description
CHANNEL CORNER 16mm 1m
CHANNEL CORNER 16mm 2m
SLT6010 CHANNEL HANGING RAIL 38mm X 24mm 1.2m
24 mm
38 m
m
5.2 mm7.8 mm
304 305
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Application
Design Specifications
Dimensions
SLT LED STRIP CHANNEL SLT6000, SLT6050Profile shaped LED strip channel,Trimless LED strip channel
• Extruded aluminium body• Anodize silver finish• Opal polycarbonate diffuser• Standard length 1000 or 2000mm
A creative solution for residential and commercial interior spaces
IP209 mm
5.2 mm
12 mm
SLT6000
SLT6000
SLT6050
SLT6050
Technical Specifications
Model No. Description
SLT6050
SLT6050/2M
SLT6000
SLT6000/2M
CHANNEL NARROW RECESSED 10mm x 12mm 1m
CHANNEL NARROW RECESSED 10mm x 12mm 2m
CHANNEL RECESSED 7.6mm x 12mm 1m
CHANNEL RECESSED 7.6mm x 12mm 2m
10 mm
5.2 mm
12 mm
304 305
PLUS
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
LED STRIP CONTROL LT8913 DIM
Application
Design Specifications
Dimensions
Smart lighting LED - single colour circuit and remote control
• Designed for single colour LED brightness control
• Touch wheel control design for easy brightness control
• Smooth 1 - 100% dimming• Input voltage range: 5-36V DC• Each controller provides one output
channel with a maximum current of 8A• 288W maximum power output at 36V
Home theatre, decorative feature lighting designs which require smart remote control
Technical Specifications
IP20
Model No. Description
LT8913 DIM
Input(V DC)
Power(W)
BodyColourDimmable
5 - 36LED STRIP CIRCUIT & REMOTE CONTROL 288 Yes White 97 x 33 x 18
Dimensions(L x W x H mm)
107
mm
59 mm
33 mm
97mm
18 mm
59 mm9 mm
306 307
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
LED Strip
LED CircuitController
LED Driver
Power supply5-36V DCConstant voltage
100%1%
50%
Level
Push Switch (optional )
AC110-230V
DIMMER
+
_220-240V AC
Wiring Diagram
(not included)
306 307
PLUS
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Application
Design Specifications
Dimensions
LED STRIP CONTROL LT8913 RGBSmart lighting LED - RGB colour circuit and remote control
• Designed for RGB LED colour brightness control
• Touch wheel control design for easy control, dimmable with scene memory
• 16 millions colours with low flicker smooth dimming and colour changing
• Input voltage range: 12-24V DC• Each controller provides three output
channels with a maximum current of 4A for each channel
• 288W maximum power output at 24V
Home theatre, decorative feature lighting designs which require smart remote control
Technical Specifications
DescriptionModel No. Description
LT8913 RGB
Input(V DC)
Power(W)
BodyColourDimmable
12-24RGB LED STRIP CIRCUIT & REMOTE CONTROL 288 Yes White 97 x 33 x 18
Dimensions(L x W x H mm)
107
mm
59 mm
33 mm
97mm
18 mm
59 mm9 mm
IP20
308 309
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Wiring Diagram
RGB LED stri p
AC110-230V
RGB/RGBW
220-240V AC+
_
RGB LED Strip
LED Strip
LED CircuitController
LED Driver
Power supply12-24V DCConstant voltage
308 309
PLUS
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
POWER REPEATER LT8914 DIM/RP
Application
Design Specifications
Single channel low voltage LED power repeater
• Designed for extending single colour LED strip lights
• With the repeater, one single colour control device controls multiple connections of LED strips
• Each repeater provides one output channel• Each channel has a maximum output
current of 8A• Input voltage range: 5-36V DC• 288W maximum power output at 36V
Home theatre, decorative feature lighting designs which require smart control
Technical Specifications
Model No. Description
LT8914 DIM/RP
Input(V DC) Power (W) Body Colour
5 - 36POWER REPEATER 288 White 97 x 33 x 18
Dimensions(L x W x H mm)
Dimensions
33 m
m
97mm
18 mm
IP20
310 311
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Wiring Diagram1. Series Connection
2. Parallel Connection
V1
EV1
OU
TPU
T
Uout=5-36VDCIout=8APout=40-288WTemp Range:-30°Ê~+55°Ê
Uin=5-36VDCIin=8.5A
POWER REPEATER
IN
PU
T5-
36V
DC
+ +
INP
UT
PW
M S
IGN
AL
+
EV1
OU
TP
UT
Uout=5-36VDCIout=8APout=40-288WTemp Range:-30°Ê~+55°Ê
Uin=5-36VDCIin=8.5A
POWER REPEATER
IN
PU
T5-
36V
DC
+ +
INP
UT
PW
M S
IGN
AL
+
LT8913 DIM
Single colour LED Strip
Single colour LED Strip
Single colour LED Strip
Power Supply5-36VDCConstant Voltage
+
_220-240V AC
Power Supply5-36VDCConstant Voltage
+
_220-240V AC
Power Supply5-36VDCConstant Voltage
+
_220-240V AC
V1
EV1
OU
TP
UT
IN
PU
T5-
36V
DC
+ +
INP
UT
PW
M S
I GN
AL
+
OU
TP
UT
IN
PU
T5-
36V
DC
+ +
INP
UT
PW
M S
IGN
AL
+
EV1
LT8913 DIM
Single colour LED Strip
Single colour LED Strip
Single colour LED Strip
Power Supply5-36VDCConstant Voltage
+
_220-240V AC
Power Supply5-36VDCConstant Voltage
+
_220-240V AC
Power Supply5-36VDCConstant Voltage
+
_220-240V AC
310 311
PLUS
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Application
Design Specifications
POWER REPEATER LT8914 RGB/RPThree channel low voltage LED power repeater
• Designed for extending RGB LED strip lights• With the repeater, one RGB colour
control device controls multiple connections of LED strips
• Each repeater provides three RGB output channels
• Each channel has a maximum output current of 6A
• Input voltage range: 12-36V DC• 648W maximum power output at 36V
Home theatre, decorative feature lighting designs which require smart control
Technical Specifications
Dimensions
175 mm
160 mm
27 mm
45 m
m
Model No. Description
LT8914 RGB/RP
Input(V) Power (W) Body Colour
36V DCPOWER REPEATER 648 White 175 x 45 x 27
Dimensions(L x W x H mm)
IP20
312 313
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Wiring Diagram1. Series Connection 2. Parallel Connection
For terms and conditions of catalogue data use, refer to INDEX
Wiring Diagram
1. Series Connection 2. Parallel Connection
AC110-230V
V3
Power Supply12-24VDCConstant Voltage
AC110-230V
Power Supply12-36VDCConstant Voltage
AC110-230V
EV3
RGB LED strip
RGB LED strip
RGB LED strip
EV3
32
1
+3
21
+12
-36V
DC
OU
TPU
T
-
PW
M S
IGN
AL
INP
UT
INP
UT
32
1
+3
21
+12
-36V
DC
OU
TPU
T
-
PW
M S
IGN
AL
INP
UT
INP
UT
Power Supply12-36VDCConstant Voltage
+
_
+
_
+
_
220-240V AC
220-240V AC
220-240V AC
LT8913 RGB
Power Supply12-24VDCConstant Voltage
AC110-230V
Power Supply12-36VDCConstant Voltage
AC110-230V
EV3
V3
AC110-230V
RGB LED strip
RGB LED stripEV3
32
1
+3
21
+12
-36V
DC
OU
TPU
T
-
PW
M S
IGN
AL
INP
UT
INP
UT
32
1
+3
21
+12
-36V
DC
OU
TPU
T
-
PW
M S
IGN
AL
INP
UT
INP
UT
Power Supply12-36VDCConstant Voltage
+
_
+
_
+
_220-240V AC
220-240V AC
220-240V AC
LT8913 RGB
313
PL US
312 313
PLUS
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
LED STRIP CONTROL LT8915 DIM
Application
Design Specifications
Single colour LED controller kit
• Designed for single colour brightness control• Touch wheel control design for easy
brightness control, with scene memory and 30m control distance
• Smooth 0 - 100% dimming• Input voltage range: 12-36V DC• Each controller provides three output
channels with a maximum current of 6A for each channel
• 648W maximum power output at 36V
Home theatre, decorative feature lighting designs which require smart control
Technical Specifications
Model No. Description
LT8915 DIM
Input(V DC)
Power(W)
BodyColourDimmable
36LED STRIP CIRCUIT & REMOTE CONTROL 648 Yes White 175 x 45 x 27
Dimensions(L x W x H mm)
Dimensions
175 mm
160 mm
27 mm
45 mm
107
mm
59 mm
59 mm9 mm
IP20
314 315
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Wiring Diagram
100%1%
50%
Level
DIMMER
For terms and conditions of catalogue data use, refer to INDEX
Wiring Diagram
L3CH LED Controller
VDC
12 36 VDC6A
72Light Type:RGB,CCT,DIMTemp Range:-30 55
2.4G
12-3
6VD
C
1
2 3
-
RG
BW
W
MATCH
12-36VDCConstant Voltage
AC110-230V
Single color LED strip
Single color LED strip
Single color LED strip
220-240V AC+
_
DIMMER
Single colour LED Strip
Single colour LED Strip
Single colour LED Strip
100%1%
50%
Level
315
PL US
314 315
PLUS
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Application
Design Specifications
LED STRIP CONTROL LT8915 RGBRGB colour LED controller kit
• Designed for RGB LED colour brightness control
• Touch wheel control design for easy brightness control, with scene memory and 30m control distance
• Smooth 0 - 100% dimming• Input voltage range: 12-36V DC• Each controller provides three output
channels with a maximum current of 6A for each channel
• 648W maximum power output at 36V
Home theatre, decorative feature lighting designs which require smart control
Technical Specifications
DescriptionModel No. Description
LT8915 RGB
Input(V DC)
Power(W)
BodyColourDimmable
36RGB LED STRIP CIRCUIT & REMOTE CONTROL 648 Yes White 175 x 45 x 27
Dimensions(L x W x H mm)
Dimensions
175 mm
160 mm
27 mm
45 mm
107
mm
59 mm
59 mm9 mm
IP20
316 317
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Wiring Diagram
V3 L3CH LED Controller
Uin=12-36VDCIin=18.5A
Uout=3 12 36 VDCIout=3 6APout=3 72 216)WLight Type:RGB,CCT,DIMTemp Range:-30 55
2.4G
MATCH
+RGB
Power Supply12-36VDCConstant Voltage
220-240V AC+
_
LED Strip
LED CircuitController
LED Driver
316 317
PLUS
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
LED STRIP CONTROL LT8915DIM/BT
Application
Design Specifications
Dimensions
Single colour LED strip controller
• Designed for single colour brightness control• Smooth 0 - 100% dimming• Input voltage range: 12-24V DC• 360W maximum power output at 24V• One channel with two sets of terminals for
easy wiring• Supports momentary switch (bell press control)
• Control button for easy commissioning• Optional memory function• Supports both wireless and wired group control
Home theatre, commercial spaces and decorative feature lighting designs which require smart control
Technical Specifications
Model No. Description
LT8915DIM/BT
Input(V DC)
Power(W)
BodyColourDimmable
LED STRIP CONTROLLER Max. 360 Yes White 175 x 45 x 27
Dimensions(L x W x H mm)
175 mm
160 mm
27 mm
45 mm
IP20 ta40
12 - 24
PLUS
318 319
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Wiring Diagram
For terms and conditions of catalogue data use, refer to INDEX
Wiring Diagram
MomentarySwitch
319
PL US
318 319
PLUS
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Application
Design Specifications
Dimensions
LED STRIP CONTROL LT8915RGB/BTRGB colour LED strip controller
• Designed for RGB colour and brightness control• Smooth 0 - 100% dimming• Input voltage range: 12-24V DC• Each controller provides three output channels
with a maximum current of 6A for each channel• 432W maximum power output at 24V• Supports momentary switch (bell press control)
• Control button for easy commissioning• Four flashing modes• Optional memory function• Supports both wireless and wired group control
Home theatre, commercial spaces and decorative feature lighting designs which require smart control
Technical Specifications
Model No. Description
LT8915RGB/BT
Input(V DC)
Power(W)
BodyColourDimmable
12 - 24RGB LED STRIP CONTROLLER Max. 432 Yes White 175 x 45 x 27
Dimensions(L x W x H mm)
175 mm
160 mm
27 mm
45 mm
IP20 ta40
PLUS
320 321
For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX
Wiring Diagram
MomentarySwitch
MomentarySwitch
320 321
PLUS