Precision Machining

Three Point Contact

Hardened Stainless Steel or Anodized Aluminum

Custom Parts Possible

Laser Marked

Serial Number for Traceability

Certified and Traceable

Features

Americas, Asia-Pacificsales@metrologyworks.comPhone: 816-650-2266

Europesales.eu@metrologyworks.com Phone: +49 30 21 78 05 67

Precision Machined

Laser Marked

Standard Drift Nest

Pin Nest Configuration

Bolt Down Drift Nest

Three Point Contact

Laser Tracker TOOLINGTS2019-385-A

Specifications

0.875”0.5”

1.5”

We Offer the Following Standard and Metric Pin Sizes

Custom Offsets and Pin Sizes Also Available

Common Offsets Include: 1”, 0.5”, 0.3125”, 25mm, 12mm, 10mmAvailable Pin SizesStandard16ths Decimals1/83/161/41/4-20 Thread5/163/87/161/25/83/47/81

0.1250.18750.2500.250 0.31250.3750.43750.5000.6250.7500.8751.000

Magnet, Yes or No

Offset

Pin Size (eg. 0.125”)

Part Specific (eg. Ball Probe Seat)

Material, Z = Stainless Steel / Y = Aluminum

Size, A = 1.5”, B = 0.875”, C = 0.5”

Bulls

eye

Tool

ing

BT - A - Z - BPS - x125 - 1 - Y

Part Number Selection & Laser Tracker Tooling Sizes:

Metric4mm5mm6mm8mm10mm12mm

www.MetrologyWorks.com27208 East 24 Highway Buckner, MO 64016

Edge Nest Configuration

Threaded Configuration

Custom Colors Available

Laser Tracker TOOLING