KW PlasticsPCR TECHNICAL DATA SHEET279 Pike County Lake Rd Troy, AL 36081 | 334.566.1563 | 800.633.8744 | kwplastics.com

KWR102-M4

PROPERTY

REGULATORY

Mixed Color Copolymer High Density Polyethylene Post-Consumer ResinBlow Molding and Extrusion

Melt Flow ASTM-D1238 0.425 g/10 minutes Specific Gravity pigmented ASTM-D1505 0.950 g/ml Tensile Yield Strength ASTM-D638 3,000 min psi Tensile Elongation 14.0%Flexural Modulus ASTM-D790 130,000 psi Notched Izod Impact ASTM-D256, A non break% Moisture/ Weight Loss at 105 oC KW-MA01 < 0.10Polypropylene, % D5576 < 10%

CONEG Compliant ROHS Compliant

NOTE: While this information is presented in good faith and believed to be accurate, KW does not guarantee satisfactory results fromreliance upon such information and disclaims all liability for any loss or damage arising out of its use. No information contained herein

is to be construed as a recommendation to use this product in conflict with any patent.

ISO 9001: 2008 registered, ISO/ IEC 17025: 2005 accredited laboratories, C.O.A. on every lot.

CHARACTERISTICS

KW PLASTICS IS THE INTERNATIONAL LEADER IN HIGH DENSITY POLYETHYLENE AND POLYPROPYLENE RECYCLING.

QUALITY

Good Impact Resistance, Available as mixed color or pre-colored black.

KWR-TDS-KWR102-M4-20131120 TMB

NOMINAL VALUES