Post on 19-Oct-2020
08/14
Keller & Kalmbach Fastening
technology
Fastening technology discount group overview
DG designation
201 Bolt anchor option 12014 Fischer FAZ II zinc-plated, MKT BZ plus
zinc-plated2017 Fischer FAZ II stainless, MKT BZ plus stainless202 Bolt anchor option 72024 Fischer EXA2025 Fischer FBN II cpl.2027 MKT B cpl.203 Zinc-plated steel anchor2030 Fischer TA M/SL M heavy-duty anchor,2031 Fischer Zykon FZA, Fischer Zykon FZEA II2033 Fischer accessories FZUB, FZEB, FZE plus, Fischer FH II SB high-performance anchor2034 Fischer high performance anchor FH II2035 Sormat Liebig heavy-duty anchor2037 MKT SZ and SL heavy-duty anchors204 Stainless steel anchor2040 Fischer Zykon FZA, Fischer Zykon FZEA II2044 Fischer high performance anchor FH II2046 MKT SZ and SL heavy-duty anchors205 Concrete screw2050 Heco Multi Monti, Fischer U washer for FBS2056 Fischer FBS 206 Steel dowel with approval2060 Fischer FPX aerated concrete anchor2063 Fischer EA IM12 D hammerset anchor, Fischer FNA II A4/C nail anchor, Fischer FHY hollow ceiling anchor, Toge TD-N ceiling anchor2065 MKT N nail anchor, Fischer FNA II zinc-plated nail anchor2066 Fischer hammerset anchor EA II2067 MKT TDN/DZ ceiling nail2068 Fischer FDN ceiling nail2069 MKT hammerset anchor E207 Other steel dowels2070 Fischer FWB expansion anchor, Fischer FSA sleeve anchor, Fischer FDBB diamond fastener, Fischer MR wall screw2071 Fischer accessories EA II SDS, EAW plus,
EA-ST, FNA S, FABS, Kölner Rawlbolt2075 MKT accessories for hammerset anchors2078 MKT Easy hollow ceiling anchor, MKT ED hammerset anchor208 Long-shaft dowel2081 Fischer FNH nail sleeve, Fischer N A2 nail anchor, MKT ND nail anchor2082 Fischer accessories for ADT, Fischer accessories
for GBS, Fischer accessories for FFS A2083 TOX VLF frame dowel2084 Fischer SXR, SXRL, FUR, SXS, S frame dowels2085 Fischer U washer, Allfa Quick nail sleeve2087 Allfa nail anchor, Fakkt nail anchor, Kölner nail
anchor, Don Quichotte Speedplug, flattener2088 KTS KT frame dowel2089 Fischer N zinc-plated nail anchor
DG designation
209 Stand-off fastening2090 Fischer renovation wall tie anchor VBS-M,
VBS-8, Fischer weather shell renovation system FWS
2091 Fischer VB wall tie anchor, Fischer S 10 J and JS adjustment dowel, Fischer Thermax stand-off installation system2093 Fischer F-S window frame dowel2094 KEW concrete frame screw, Koelner concrete
frame screw2096 Toge TU and TK window frame dowel2098 Fischer ASL distance screw, Fischer l F-M metal frame screw, Fischer FFSZ and FFS window frame screws,
Fischer JUSS adjustment screw210 Scaffolding and insulation fasteners2101 Fischer accessories for scaffolding and
insulation fasteners ADT, RI, DHM2103 Fischer insulation fastener DIPK, FIF-K/S, DVN, DHT, FID,FATB, FAFZH,
insulation plate2104 Fischer scaffolding fastener GS, S 14 ROE, S 16 H, FI G, S 12 R, S 14 H2105 Fischer insulation fastener DHK, DHM inox, DHM2107 Allfa insulation fastener211 Easy fastening2112 Fischer M-S, M, MS, GB, FMD, TB/TBB, FTP K, FTP M, PA, P 9 K, Fix it, TS, FU, Fischer accessories for FTP EK, FTP EM, Fischer assortments UX, SX, S, TB, TBB, TS,
FU, MKT DU2114 TOX TRI, TRIKA, TFS2115 Fischer UX, SX, S, Mungo perforated brick dowel2117 Lüsebrink ceiling hook2118 SMK brass dowel2119 Fakkt universal dowel212 Cavity fastener2121 Fischer nylon toggle dowel K 54, Fischer PD board anchor, Fischer GK and GKM plasterboard anchor2122 Fischer accessories for HM Z, GKW2124 Fischer toggle and spring toggle anchors K, KD,
KDH, KM, Mungo plasterboard dowel2125 Allfa M, Allfa installation pliers KTS HDK, KTS,
lamella nails2126 Fischer cavity dowel HM 2127 MKT GKD plasterboard dowel2128 SMK toggle anchor213 Chemical fasteners (cartridges)2130 Toge ATA cartridge2131 Fischer FIS VW, EM, Fischer fill & fix cartridge2132 Fakkt cartridge case set,
MKT cartridge case set2133 Fischer FHB II cartridge2134 Fischer cartridge FIS V, HB, PM, SB, Fischer case sets
Fastening technology discount group overview
DG designation
2135 Sormat ITH VS cartridge 2136 MKT VMZ, VMU, PY, Fakkt VMU cartridge Fischer RSB, R M, UMV-P cartridge2137 MKT V-P cartridge214 Chemical fasteners (zinc-plated anchor rods)2140 Fischer FRA, FIS PS anchor rod2142 Fischer FHB II, FHB II-A dyn. anchor rod2143 Fischer UMV-A dyn. anchor rod2147 Fischer FPB Set, RG, FIS A, MKT anchor rod VMU-A, VMU-AH, VMZ-A2148 MKT V-A, VM-A anchor rod215 Chemical fasteners (stainless anchor rods)2150 Fischer FHB II-A dyn. anchor rod2151 Fischer FHB II anchor rod2154 Fischer FPB Set, RG, FIS A, MKT VMU-A anchor rod2157 MKT VMU-AH, VMZ-A, V-A anchor rod216 Chemical fasteners (internally threaded anchor)2160 Durabel TSM A2161 Fischer FIS E2163 MKT VI-G zinc-plated2165 Fischer RG MI2167 MKT VI-G A4, VMU-IG, VM-IG, VMU-AH217 Chemical fasteners (other)2170 Toge accessories2171 Fischer FCC2172 Accessories (application guns, mixers, brushes, blowers, tapered drills, etc.)2173 Fischer FIS H sieve sleeve, MKT VMU-SH sieve sleeve2174 MKT VM-SH sieve sleeve218 Wood connectors, nails, blocks2180 BTS disk dowel, Göbel cover caps,
Harpun blocks2181 Gutzeit roof nail2182 BTS spherical washer, Drakena rafter nails2183 Drakena wire and deck nails, Bentele rod
dowels, wall connection bolts, Honecker knock-in cap
2185 Gutzeit wood connectors, Müller cover caps, Scholtyschik post anchors, Simpson connectors and nails, Bierbach screws and nails
2187 Don Quichotte nails2189 Göbel rosettes219 Electrical fasteners2191 Fischer E-Fix products SHA, plus MS, WIC, WIS,
WI, WIZ2193 Fischer E-Fix products LS, ZS, SD, KB, NS,
MNS, NSB, BN, Störing & Brückmann punched strip
2194 Fischer BN/UBN cable ties, Kunkel spacing clamps, Störing & Brückmann eyelets2197 Don Quichotte electrical fasteners, clamps,
multi-use clips, Fixpins, installation tape
DG designation
220 Sanitary fasteners2201 Fischer accessories for BU, AKM, HED2202 Fischer sanitary fasteners WDP 33, WCN, S 8 RD, WB 5N, WD, BO, WST,
UST, WL2204 Fischer KM sanitary fasteners221 Pipe clips2211 Fischer FGRS plus, FRSL pipe clamps2213 Fischer FGRS, FKS plus, FRS plus, FRS, FRSN, FRSK, KFT pipe clamps2216 Fischer FRSH, FRSM, ETR, SGS pipe clamps222 Installation system2221 Fischer fixed point and sliding elements FFPS, FFPK, FSFP2222 Fischer accessories for installation systems2224 Fischer MS-L, MS, FUS assembly rails2225 Fischer rail connections fixed point and sliding
elements for systems MS-L, MS, FUS, Fischer hanging material
223 Stainless installation system2233 Fischer installation accessories for stainless
steel product range2236 Fischer A2/A pipe clamps4224 Air conditioning, ventilation, metal ceiling
fasteners2241 Fischer MCE fasteners for air conditioners2243 Fischer LGS ventilation duct clamps2244 Fischer accessories for air conditioning,
ventilation, ceiling2245 MTH clamping plates, BS clamping plates2248 Fischer installation accessories for air
conditioning, ventilation, ceiling, LKHN, LKH, ZKHN, ZKH, LRBN, LRB, EMS, TZ, TZH“
225 Fischer other2250 Fischer SB assortment, Fischer pro assortment2251 Fischer SB, pro assortment installation, Fischer
stone drill, Fischer pro bits2252 Fischer SDS Max plus II drilling tool, Fischer
SDS Max I drilling tool2254 Fischer SDS plus II drilling tool, Fischer bits2255 Fischer SDS plus IV drilling tool226 Direct installation2261 Fischer driving bolts, Fischer formwork stop,
Fischer film fastener, Fischer insulation holder, Fischer ceiling fastener
Table of contents
Fischer anchor bolt 766-772 FAZ II
MKT anchor bolt 773-779
Fischer express anchor 780-781 EXA
Fischer Zykon anchor 782-791 FZA
Fischer 787 Zykon crampon fastener
Fischer hammerset anchor 789 FZEA II
Fischer 791 FDBB diamond drill fastener
Fischer high performance anchor 792-795 FH II
MKT heavy-duty anchor 796-797
Liebig safety dowels 798-799
Fischer dowels 800 TAM
Fischer expansion anchor 800 FWB Fischer hammerset anchor 801-803 EA II
MKT hammerset anchor 804-805 E
MKT hollow ceiling dowel 805 EASY
Brass expansion dowel 806
Fischer aerated concrete anchor 806-807 FPX -I
Multi-Monti wall 808-812 concrete screw system
Fischer nail anchor 812-814 FNA II
MKT nail anchor 814-815 N
Toge ceiling dowel 816 TD-N
FAKKT injection system 817-826 VMU 300 and 345
Fischer Highbond 827-837 Composite mortar II
Fischer injection mortar 837 Powerbond FIS PM 360 S
Fischer Superbond 838-841 RSB mortar cartridges
Fischer injection mortar 842-845 Superbond FIS SB 390 S
Fischer reaction anchor 846-849 R
Fischer injection mortar 851-860 FIS V
Fischer anchor sleeves 861 FIS
Fischer UMV dynamic 862-863 Expansion dowel
Fischer injection mortar for 864-866 Rebar connection
Fischer Thermax 867-873
Fischer fill & fix 879 injection dowel
MKT composite anchor 880-882 V-P
MKT injection system 883-886 VMZ
Asphalt fastener 889-890 Toge composite mortar
Steel anchor Chemical fasteners
Heavy-duty anchors
Other steel dowels
Bolt anchors Other steel dowels
Fischer 916 GB aerated concrete dowels
Fischer plasterboard dowel 917 GK
Mungo Jet Plug 917 Plasterboard dowel
Fischer 918-919 HM cavity dowels
Toggle dowels 919-920
Fischer 920 FID insulation dowel
Insulation holder 920-921
Fischer scaffolding dowel 921 ROE
Scaffolding screws 921
Adjustment blocks and 922-925 assembly wedges
Cable/pipe clamps, 926-929 electrical insulation material
Cable ties and 929-932 accessories
Fixpin 932-933 Impact nails
Punched installation strip 933
Trapezoidal sheet metal 934-935 fastener
MTH clamping plates 935
BTS girder clamp 936
Sanitary installation technology 937-938 and accessories
Fischer long-shaft dowel 891-898 SXR
Fischer frame dowel 899-901 FUR
KTS 902-904 Frame facade dowel
Fischer metal frame dowel 905
Toge metal frame dowel 905-906
Concrete frame screw 906-907
FAKKT nail anchor 907-908
Fischer nail anchor 908
TOTAL FIXX Combi 909 Nail/screw/dowel
ALLFA nail anchor 909 with sealing washer
FAKKT nylon dowels 910
FAKKT universal dowel 910-911
Fischer universal dowel 911-912 UX
Fischer dowels 912 SX
Fischer dowels 913 S
Fischer dowels 913 M-S
Tox TRI-/TRIKA 914-915 All-purpose dowel
Mungo 915 Perforated brick dowels
Table of contents
a b
e hg
f
d
c
Long-shaft dowel Light fasteners
Light fasteners
Cavity fasteners
Scaffolding and insulation fasteners
Blocks and wedges
Electrical fasteners
Installation systems
Rail fastener 944-957 and accessories
Wood connector 944-957 Carpenter need
Nails 958
Assembly support 958
PU foams 960-967 and accessories
Silicone/acrylic, 968-973 Sealants and accessories
Rubber adhesive 974-983
Application guns 983-985
Racofix 985 quick installation mortar
Joint tapes 986-987 Compribands
Window connection film 988
Table of contents
Installation systems
Other
Bonding and filling
A pageAcrylic sealants 972-973Adjustment blocks 922-925Aerated concrete application Fischer injection mortar 876-877Allfa clamp nail 909Allfa insulation holder one-part IPM 920Allfa insulation holder two-part KP 921Allfa knock-in dowel with sealing washer 909Allfa nail anchors with sealing washer 909Anchor rod for Fischer reaction anchor 839-840, 847Application devices for FAKKT VMU 826Application devices for Fischer injection 878-879Application devices for MKT injection 888Application guns 964, 983-985Asphalt fastener 889-890Assembly adhesive 974-975, 981-983Assembly rails/accessories 939-942Assembly support 958Assembly wedges 922-925
BBlocks 922-925Bracket connector 945Brass expansion dowel 806Building chemistry 959-988
CCable ties 930-932Concrete frame screw 906-907Construction adhesive 974-975,
981-983Construction clamp 957 DDeck nail 958Disk dowel 956
EEA II hammerset anchor 801-803EASY hollow ceiling dowel EASY 805Electrical fasteners 926-929Extension tube for Fischer injection 874
FFAKKT application devices for VMU 826FAKKT knock-in dowel 907-908FAKKT nail anchor 907-908FAKKT nylon dowels 910FAKKT plastic dowel 910FAKKT sieve sleeve for VMU 826FAKKT universal dowel 910-911FAKKT VMU anchor rods 822-825FAKKT VMU injection system 817-821
F page FAKKT VMU injection system sieve sleeve 826FH II heavy-duty anchor 792-795FH II high performance anchor 792-795Fire protection silicone 977Fischer aerated concrete application 876-877Fischer aerated concrete dowel GB 916Fischer aerated concrete injection mortar 876-877Fischer anchor rod for reaction anchor 839-840, 847Fischer application devices for injection 878-879Fischer cavity dowel HM 918-919Fischer EXA anchor bolt 780-781Fischer EXA bolt anchor 780-781Fischer express anchor EXA 780-781Fischer extension tube 874Fischer FAZ II anchor bolt 766-772Fischer FAZ II bolt anchor 766-772Fischer FHB II anchor rod 831-837Fischer FHB II injection mortar 827-830Fischer FID insulation dowel 920Fischer fill & fix injection dowel 879Fischer FIS A anchor rod 843-844, 856Fischer FIS EM epoxy resin mortar 864-866Fischer FIS EM rebar application 864-866Fischer FIS EM rebar connection 864-866Fischer FIS EM subsequent reinforcement 864-866Fischer FIS PM 360 S 837Fischer FIS PM 360 S injection mortar 837Fischer FIS SB 390 S 842Fischer FIS V 360 S injection mortar 851-855,
865, 876Fischer FNA II nail anchor 812-814Fischer FPX-I aerated concrete anchor 806-807Fischer FUR frame dowel 899-901Fischer FUR long-shaft dowel 899-901Fischer GB aerated concrete dowel 916Fischer GK plasterboard dowel 917Fischer hammerset anchor EA II 801-803Fischer Highbond FHB II-P injection mortar 827-830Fischer Highbond FHB II anchor rod 831-837Fischer Highbond injection mortar 827-830Fischer high performance anchor FH II 792-795Fischer HM cavity dowel 918-919Fischer injection mortar FIS V 360 S 851-855,
865, 876Fischer injection push-through anchor sleeve 861Fischer injection sieve and anchor sleeve 874Fischer insertion tool RA-SDS 875Fischer insulation dowels FID 920Fischer internally threaded anchor RG MI 841, 845,
848, 857
Table of Contents
F page Fischer internal thread expansion anchor FWB 800Fischer M-S nylon dowels 913Fischer metal frame dowel FM 8 905Fischer metal internally threaded sleeve 875Fischer nail anchor N 908Fischer N knock-in dowel 908Fischer N nail anchor 908Fischer nylon dowels M-S 913Fischer nylon dowels S 913Fischer plasterboard dowel GK 917Fischer Powerbond injection mortar 837Fischer R composite anchor 846Fischer RG MI internally threaded sleeve 841, 845,
848, 857Fischer R mortar cartridge 846Fischer ROE scaffolding dowel 921Fischer R reaction anchor 846Fischer RSB composite anchor 838Fischer scaffolding dowel ROE 921Fischer sieve and anchor sleeve 874Fischer S nylon dowels 913Fischer Superbond injection mortar 842Fischer Superbond Mortar Cartridge RSB 838Fischer SXR frame dowel 891-898Fischer SXR long-shaft dowel 891-898Fischer TAM heavy-duty anchor 800Fischer Thermax 867-873Fischer Thermax thermal separation 867-873Fischer UMV composite anchor 862Fischer UMV dynamic anchor rod 863Fischer UMV mortar cartridge 862Fischer UMV multicone dyn. anchor rod 863Fischer UMV reaction anchor 862Fischer UX universal dowels 911-912Fischer Zykon bolt anchor FZA 782-791FIS H K push-through anchor sleeve 861Fix ALL adhesive and sealant 974-975, 983Fixpin impact nail 932-933Flat connector 945FNA II nail anchor 812-814
GGirder clamp 936Glazing silicone 970-971Gun foam 960-963, 967Gun foam cleaner 965
HHammerset anchor E 804-805Hammerset anchor EA II 801-803Hammerset anchors 804-805Heco Multi-Monti screw anchor 808-812High temperature silicone 977-978Hollow ceiling dowel EASY 805
I pageInjection mortar for aerated concrete 876-877Installation foams 960-963, 967Internal thread expansion anchor FWB 800
JJoint tape 986-988Joist hanger 948
KKombi nail/screw dowel Total Fixx 909Kompri-Band 986-987KTS facade dowel type KT 902-904KTS frame/facade dowel type KT 902-904
LLiebig anchor 798-799Liebig heavy-duty anchor 798-799Liebig safety dowels 798-799Lifting eye bolt for scaffolding dowels 921
MMKT bolt anchor BU 779MKT bolt anchors BZ plus 773-775MKT BU bolt anchor 779MKT BZ bolt anchor 775-778MKT BZ plus anchor bolt 773-775MKT composite anchor rod V-A 881-882MKT hammerset anchor E 804-805MKT heavy-duty anchor SZ 796-797MKT hollow ceiling dowel EASY 805MKT N nail anchor 814-815MKT SZ heavy-duty anchor 796-797MKT V-A anchor rod 881-882MKT V-A composite anchor rod 881-882MKT V-P composite anchor 880MKT V-P mortar cartridge 880MKT V-P reaction anchor 880MKT VMU Express injection mortar 887MKT VMZ anchor rod 884-886MKT VMZ composite anchor rod 884-886MKT VMZ injection mortar 883MTH Nova Grip clamping plates 935Multi-Monti screw anchor 808-812Multi Monti concrete screw 808-812Mungo Fiber Jet plasterboard dowel 918Mungo Jet Plug plasterboard dowel 917Mungo perforated brick dowel 915
NNails 958N nail anchor 814-815
PPerforated plate brackets 946Perforated plats 944
Table of Contents
Table of Contents
P pagePipe clips 937-938Post anchors 951-955Powerbond FIS PM 360 S 837Primer 979PU foam/PU gun foam 960-967Punched mounting strip 933Punched strip 933Push-in dowel 956
RRacofix 985Rafter anchor 949Rafter nails 957Ribbed nails 956Roof nails 957RSB mortar cartridges 838RSB Superbond mortar cartridge 838
S Scaffolding screw - lifting eye bolt 921Screw nails 958Sealing cap for scaffolding dowels 921Sealing compound 968-983Silicone sealing compounds and accessories 968-972Simplex wood connector 957Steel nails 958Summers 950Superbond injection mortar 842Suspension eye and pipe hanger 934SXR Fischer long-shaft dowel 891-898
TTAM heavy-duty anchor 800TD-N ceiling dowels 816Thermax thermal separation 867-873Toge asphalt fastener 889-890Toge ATA 2004C injection mortar 889-890Toge ceiling dowel TD-N 816Toge metal frame dowel TK 10 906Toge metal frame dowel TU 10 905Toge TD-N ceiling dowel 816Toggle dowels 919-920Total Fixx Combi nail/screw dowel 909TOX TRI all-purpose dowels 914TOX TRIKA all-purpose dowels 915Trapezoidal sheet metal fastener 934-935
UUMV multicone dynamic anchor rod 863Universal adhesive and sealant 974-976
VVMU-Express injection mortar 887VMZ injection mortar 883
W pageWedges 922-925Wind bracing strap 947Wood connector 944-950
ZZykon anchor 782-791Zykon FZA bolt anchor 782-791
Heavy-duty anchors, light and special fasteners,
chemical anchorings, composite and injection systems An
cho
ring
s,
inje
ctio
n sy
stem
s
766 www.keller-kalmbach.com
FAZ II bolt anchor - powerful and flexiblei
The longer thread permits, for example, stand-off installation, ensuring maximum flexibility in application.
The interaction of cone and expansion clip increases the tensile load-bearing capacity considerably and permits minimum edge and axial spacing. For use with very high load requirements.
The protruding insertion pin protects the thread against damage during setting.
The distinct edge holds the expansion clip in its position even when reinforcements are hit, thus ensuring secure installation.
Optionally with pre-installed normal U washer or large GS U washer. NEW: Now also with HBS U washer accord-ing to timber building standard DIN 1052 (not pre-installed).
Powerful and flexibleThe FAZ II is suitable for pre- and push-through installation and also optimal for stand-off installation. When the nut is tightened, the cone bolt is pulled into the expansion clip and braces against the borehole wall. When the specified torque is achieved, the anchor is set in compliance with the approval.
Example of an application with a fixture thickness of 30 mm
Very high load at standard anchoring depth FAZ II 10/30 standard anchoring depth = 60 mm. Possible working length up to 30 mm maximum with a permissible tensile load of 4.3 kN and transverse load of 11.4 kN.
Speedy installation thanks to reduced anchoring depth FAZ II 10/10 reduced anchoring depth = 40 mm. Possible working length up to 30 mm maximum with a permissible tensile load of 4.3 kN and transverse load of 8.7 kN.
hef, stand
hef, red
ETA-05/0069ETAG 001-2
Option 1 für gerissenen Beton
Seismische Leistungskategorie C1
Drilled and installed fasterThe reduced anchoring depth makes it possible
1.
2.
30 mm
30 mm
NEW
NEW
NEW
Advantages:- reinforced expansion clip permits very high load-bearing
capacities, resulting in fewer fastening points and smaller anchor bases being required
- reduced anchoring depth (see example) permits considerably lower drilled hole depths, ensuring tangibly faster installation
- few hammer blows and the minimum tightening slip ensure a perceivably simple and comfortable setting process
- international approvals guarantee maximum safety and very high efficiency. Applications in earthquake zones (seismic) are covered by these approvals as well
767order online: www.kk-shop.com
FAZ II K bolt anchor - powerful and flexiblei
The shorter bolt with reduced anchoring depth is the economical choice for a variety of applications, such as fastening cable lines and facade substructures.
Short and practicalThe FAZ II is suitable for pre- and push-through installation. The low borehole depth of the K version permits even faster installation and reduces the number of reinforcement hits.
ETA-05/0069ETAG 001- 2
Option 1 für gerissenen Beton
The 10 new dimensions of the FAZ II K in a galvanically zinc-plated design as well as in stainless steel can be used up to a fixture thickness of 20 mm.
Optionally with normal U washer or large GS U washer.
NEW
Advantages:- the properties of the K version significantly minimize the drill-
ing effort as well as the hammer blows when the bolt anchor is inserted; this saves energy and installation time
- reinforced expansion clip permits a high load-bearing capac-ity, even with a reduced anchoring depth. This ensures an unbeatable price-performance ratio
- for the FAZ II 10 K (borehole diameter 10 mm), the tensile loads are unchanged compared to the standard anchoring depth, thus ensuring maximum performance
1 3 4 52
M10 - M12
768 www.keller-kalmbach.com
Fischer anchor bolts FAZ II (Standard-Version)
Approved by the building authorities: European Technical Approval, Option 1, approval no. ETA-05/0069. Concrete C20/25 to C50/60, cracked. Concrete C20/25 to C50/60, non-crackedApplication: The Fischer FAZ II bolt anchors are used to fasten medium-weight to heavy objects in concrete. Main areas of application include metal structures of all kinds, wooden construction, substructures, machinery, devices and much more.Properties: The Fischer FAZ II bolt anchors are suitable for pre-installation and push-through installation and also optimal for stand-off installation thanks to the longer thread. Applications in earthquake zones (seismic) are covered by these approvals as well.Installation instructions: Installation only permitted with torque wrench. When the specified torque is achieved, the anchor is set in compliance with the approval.Advantages:- very high load-bearing capacities with few fastening points- reduced anchoring depth for faster installation and lower borehole depth- minimum tightening slip for a simple and comfortable setting process- international approvals for maximum safety and very high efficiency (applications
in earthquake areas (seismic) are also covered by these approvals)
galvanized DG 2014Item no. Type Drill Ø Min.
borehole depth for
push-through installa-
tion
Dowel length
Thread Ø x length
mm
Standard anchoring depth
with correspond-ing working
length (working length = clamping range)
Reduced anchoring depth
with correspond-ing working
length (working length = clamping range)
Price per 100
pieces
Pack-age con-tents
hef, stand. tfix hef, red. tfix62640810 FAZ ll 8/10 8 mm 65 mm 75 mm M 8 x 38 45 mm 10 mm - - • 50 62640830 FAZ ll 8/30 8 mm 85 mm 95 mm M 8 x 58 45 mm 30 mm - - • 5062640850 FAZ ll 8/50 8 mm 105 mm 115 mm M 8 x 40 45 mm 50 mm - - • 50626408100 FAZ ll 8/100 8 mm 155 mm 165 mm M 8 x 41 45 mm 100 mm - - • 25626408160 FAZ ll 8/160 8 mm 215 mm 225 mm M 8 x 42 45 mm 160 mm - - • 20626401010 FAZ ll 10/10 10 mm 85 mm 95 mm M 10 x 53 60 mm 10 mm 40 mm 30 mm • 50626401020 FAZ ll 10/20 10 mm 95 mm 105 mm M 10 x 63 60 mm 20 mm 40 mm 40 mm • 25626401030 FAZ ll 10/30 10 mm 105 mm 115 mm M 10 x 73 60 mm 30 mm 40 mm 50 mm • 25626401050 FAZ ll 10/50 10 mm 125 mm 135 mm M 10 x 93 60 mm 50 mm 40 mm 70 mm • 20626401080 FAZ ll 10/80 10 mm 155 mm 165 mm M 10 x 123 60 mm 80 mm 40 mm 100 mm • 206264010100 FAZ ll 10/100 10 mm 175 mm 185 mm M 10 x 143 60 mm 100 mm 40 mm 120 mm • 206264010160 FAZ ll 10/160 10 mm 235 mm 245 mm M 10 x 193 60 mm 160 mm 40 mm 180 mm • 20626401210 FAZ ll 12/10 12 mm 100 mm 110 mm M 12 x 61 70 mm 10 mm 50 mm 30 mm • 20626401220 FAZ ll 12/20 12 mm 110 mm 120 mm M 12 x 71 70 mm 20 mm 50 mm 40 mm • 20626401230 FAZ ll 12/30 12 mm 120 mm 130 mm M 12 x 81 70 mm 30 mm 50 mm 50 mm • 20626401250 FAZ ll 12/50 12 mm 140 mm 150 mm M 12 x 101 70 mm 50 mm 50 mm 70 mm • 20626401280 FAZ ll 12/80 12 mm 170 mm 180 mm M 12 x 131 70 mm 80 mm 50 mm 100 mm • 206264012100 FAZ ll 12/100 12 mm 190 mm 200 mm M 12 x 151 70 mm 100 mm 50 mm 120 mm • 206264012160 FAZ ll 12/160 12 mm 250 mm 260 mm M 12 x 186 70 mm 160 mm 50 mm 180 mm • 106264012200 FAZ ll 12/200 12 mm 290 mm 300 mm M 12 x 186 70 mm 200 mm 50 mm 220 mm • 10626403165 FAZ ll 16/5 16 mm 115 mm 128 mm M 16 x 64 85 mm 5 mm 65 mm 25 mm • 10626401625 FAZ ll 16/25 16 mm 135 mm 148 mm M 16 x 84 85 mm 25 mm 65 mm 45 mm • 10626401650 FAZ ll 16/50 16 mm 160 mm 173 mm M 16 x 109 85 mm 50 mm 65 mm 70 mm • 106264016100 FAZ ll 16/100 16 mm 210 mm 223 mm M 15 x 159 85 mm 100 mm 65 mm 120 mm • 106264016160 FAZ ll 16/160 16 mm 270 mm 283 mm M 16 x 189 85 mm 160 mm 65 mm 180 mm • 106264016200 FAZ ll 16/200 16 mm 310 mm 323 mm M 16 x 189 85 mm 200 mm 65 mm 220 mm • 106264016250 FAZ ll 16/250 16 mm 360 mm 373 mm M 16 x 100 85 mm 250 mm 65 mm 270 mm • 106264016300 FAZ ll 16/300 16 mm 410 mm 423 mm M 16 x 100 85 mm 300 mm 65 mm 320 mm • 10626402030 FAZ ll 20/30 20 mm 155 mm 172 mm M 20 x 54 100 mm 30 mm - - • 5626402060 FAZ ll 20/60 20 mm 185 mm 202 mm M 20 x 84 100 mm 60 mm - - • 56264020160 FAZ ll 20/160 20 mm 285 mm 302 mm M 20 x 100 100 mm 160 mm - - • 5626402430 FAZ ll 24/30 24 mm 185 mm 205 mm M 24 x 58 125 mm 30 mm - - • 5626402460 FAZ ll 24/60 24 mm 215 mm 235 mm M 24 x 88 125 mm 60 mm - - • 5
769order online: www.kk-shop.com
Continuation of Fischer anchor bolts FAZ II (Standard-Version)
Stainless steel A4
DG 2017
Item no. Type Drill Ø Min. borehole depth for
push-through installa-
tion
Dowel length
Thread Ø x length
mm
Standard anchoring depth
with correspond-ing working
length (working length = clamping range)
Reduced anchoring depth
with corresponding working length
(working length = clamping range)
Price per 100 pieces
Pack-age con-tents
hef, stand. tfix hef, red. tfix62643810 FAZ ll 8/10 8 mm 65 mm 75 mm M 8 x 38 45 mm 10 mm - - • 50 62643830 FAZ ll 8/30 8 mm 85 mm 95 mm M 8 x 58 45 mm 30 mm - - • 5062643850 FAZ ll 8/50 8 mm 105 mm 115 mm M 8 x 40 45 mm 50 mm - - • 50626431010 FAZ ll 10/10 10 mm 85 mm 95 mm M 10 x 53 60 mm 10 mm 40 mm 30 mm • 50626431020 FAZ ll 10/20 10 mm 95 mm 105 mm M 10 x 63 60 mm 20 mm 40 mm 40 mm • 50626431030 FAZ ll 10/30 10 mm 105 mm 115 mm M 10 x 73 60 mm 30 mm 40 mm 50 mm • 50626431050 FAZ ll 10/50 10 mm 125 mm 135 mm M 10 x 93 60 mm 50 mm 40 mm 70 mm • 20626431070 FAZ ll 10/70 10 mm 145 mm 155 mm M 10 x 113 60 mm 70 mm 40 mm 90 mm • 2062643101001 FAZ ll 10/100 10 mm 175 mm 185 mm M 10 x 143 60 mm 100 mm 40 mm 120 mm • 2062643101601 FAZ ll 10/160 10 mm 235 mm 245 mm M 10 x 193 60 mm 160 mm 40 mm 180 mm • 20626431210 FAZ ll 12/10 12 mm 100 mm 110 mm M 12 x 61 70 mm 10 mm 50 mm 30 mm • 20626431220 FAZ ll 12/20 12 mm 110 mm 120 mm M 12 x 71 70 mm 20 mm 50 mm 40 mm • 20626431230 FAZ ll 12/30 12 mm 120 mm 130 mm M 12 x 81 70 mm 30 mm 50 mm 50 mm • 20626431250 FAZ ll 12/50 12 mm 140 mm 150 mm M 12 x 101 70 mm 50 mm 50 mm 70 mm • 20626431260 FAZ ll 12/60 12 mm 150 mm 160 mm M 12 x 111 70 mm 60 mm 50 mm 80 mm • 206264312100 FAZ ll 12/100 12 mm 190 mm 200 mm M 12 x 151 70 mm 100 mm 50 mm 120 mm • 206264312160 FAZ ll 12/160 12 mm 250 mm 260 mm M 12 x 186 70 mm 160 mm 50 mm 180 mm • 2062643165 FAZ ll 16/5 16 mm 115 mm 128 mm M 16 x 64 85 mm 5 mm 65 mm 25 mm • 20626431625 FAZ ll 16/25 16 mm 135 mm 148 mm M 16 x 84 85 mm 25 mm 65 mm 45 mm • 20626431650 FAZ ll 16/50 16 mm 160 mm 173 mm M 16 x 109 85 mm 50 mm 65 mm 70 mm • 206264316100 FAZ ll 16/100 16 mm 210 mm 223 mm M 16 x 159 85 mm 100 mm 65 mm 120 mm • 10626432030 FAZ ll 20/30 20 mm 155 mm 172 mm M 20 x 54 100 mm 30 mm - - • 4626432060 FAZ ll 20/60 20 mm 185 mm 202 mm M 20 x 84 100 mm 60 mm - - • 4626432430 FAZ ll 24/30 24 mm 185 mm 205 mm M 24 x 58 125 mm 30 mm - - • 4626432460 FAZ ll 24/60 24 mm 215 mm 235 mm M 24 x 88 125 mm 60 mm - - • 4
Steel, highly corrosion-resistant (C) DG 2017Item no. Type Drill Ø Min.
borehole depth for
push-through installa-
tion
Dowel length
Thread Ø x length
mm
Standard anchoring depth
with correspond-ing working
length (working length = clamping range)
Reduced anchoring depth
with correspond-ing working
length (working length = clamping range)
Price per 100 pieces
Pack-age con-tents
hef, stand. tfix hef, red. tfix62501428 FAZ ll 8/10 8 mm 65 mm 75 mm M 8 x 38 45 mm 10 mm - - • 1062501429 FAZ ll 8/30 8 mm 85 mm 95 mm M 8 x 58 45 mm 30 mm - - • 1062506437 FAZ ll 8/50 8 mm 105 mm 115 mm M 8 x 40 45 mm 50 mm - - • 1062501430 FAZ ll 10/10 10 mm 85 mm 95 mm M 10 x 53 60 mm 10 mm 40 mm 30 mm • 1062503185 FAZ ll 10/30 10 mm 105 mm 115 mm M 10 x 73 60 mm 30 mm 40 mm 50 mm • 1062503186 FAZ ll 12/10 12 mm 100 mm 110 mm M 12 x 61 70 mm 10 mm 50 mm 30 mm • 1062501431 FAZ ll 12/30 12 mm 120 mm 130 mm M 12 x 81 70 mm 30 mm 50 mm 50 mm • 1062501432 FAZ ll 16/25 16 mm 135 mm 148 mm M 16 x 84 85 mm 25 mm 65 mm 45 mm • 1062503187 FAZ ll 16/50 16 mm 160 mm 173 mm M 16 x 109 85 mm 50 mm 65 mm 70 mm • 10
770 www.keller-kalmbach.com
FAZ II HBS bolt anchor (with washer according to timber building standard DIN 1052)
galvanized DG 2014Item no. Type Drill Ø Min.
bore-hole
depth for
push-through installa-
tion
Dowel length
Thread Ø x length
mm
Standard anchoring depth with
corresponding working length
(working length =
clamping range)
Reduced anchoring depth with
correspond-ing working
length (working length =
clamping range)
U washer (external
diameter x thickness)
mm
Price per 100
pieces
Pack-age con-tents
h2 hef, stand. tfix hef, red. tfix6264212100 FAZ ll 12/100
HBS12 mm 190 mm 205 mm M 12 x 151 70 mm 100 mm 50 mm 120 mm 58 x 6.0 • 20
6264212120 FAZ ll 12/120 HBS
12 mm 210 mm 225 mm M 12 x 171 70 mm 120 mm 50 mm 140 mm 58 x 6.0 • 20
6264216160 FAZ ll 16/160 HBS
16 mm 270 mm 278 mm M 16 x 189 85 mm 160 mm 65 mm 180 mm 68 x 6.0 • 10
6264216200 FAZ ll 16/200 HBS
16 mm 310 mm 328 mm M 16 x 189 85 mm 200 mm 65 mm 220 mm 68 x 6.0 • 10
Fischer FAZ II GS with a large U washer
galvanized DG 2014Item no. Type Drill Ø Min.
bore-hole
depth for
push-through installa-
tion
Dowel length
Thread Ø x length
mm
Standard anchoring depth with
corresponding working length
(working length =
clamping range)
Reduced anchoring depth with
corresponding working length
(working length =
clamping range)
U washer (external
diameter x thickness)
mm
Price per 100
pieces
Pack-age con-tents
h2 hef, stand. tfix hef, red. tfix62641810 FAZ ll 8/10 GS 8 mm 65 mm 75 mm M 8 x 38 45 mm 10 mm - - 22 x 2.5 • 50 62641830 FAZ ll 8/30 GS 8 mm 85 mm 95 mm M 8 x 58 45 mm 30 mm - - 22 x 2.5 • 50626411010 FAZ ll 10/10 GS 10 mm 85 mm 95 mm M 10 x 53 60 mm 10 mm 40 mm 30 mm 25 x 3.0 • 50626411030 FAZ ll 10/30 GS 10 mm 105 mm 115 mm M 10 x 73 60 mm 30 mm 40 mm 50 mm 26 x 3.0 • 25626411210 FAZ ll 12/10 GS 12 mm 100 mm 110 mm M 12 x 61 70 mm 10 mm 50 mm 30 mm 30 x 3.0 • 20626411220 FAZ ll 12/20 GS 12 mm 110 mm 120 mm M 12 x 71 70 mm 20 mm 50 mm 40 mm 30 x 3.0 • 20626411230 FAZ ll 12/30 GS 12 mm 120 mm 130 mm M 12 x 81 70 mm 30 mm 50 mm 50 mm 30 x 3.0 • 20626411250 FAZ ll 12/50 GS 12 mm 140 mm 150 mm M 12 x 101 70 mm 50 mm 50 mm 70 mm 30 x 3.0 • 206264112100 FAZ ll 12/100 GS 12 mm 190 mm 200 mm M 12 x 151 70 mm 100 mm 50 mm 120 mm 30 x 3.0 • 206264112120 FAZ ll 12/120 GS 12 mm 210 mm 220 mm M 12 x 171 70 mm 120 mm 50 mm 140 mm 30 x 3.0 • 206264116160 FAZ ll 16/160 GS 16 mm 270 mm 283 mm M 16 x 189 85 mm 160 mm 65 mm 180 mm 56 x 5.0 • 106264116200 FAZ ll 16/200 GS 16 mm 310 mm 323 mm M 16 x 189 85 mm 200 mm 65 mm 220 mm 56 x 5.0 • 10
771order online: www.kk-shop.com
Stainless steel A4
DG 2017
Item no. Type Drill Ø Min. bore-hole
depth for
push-through
instal-lation
Dowel length
Thread Ø x length
mm
Standard anchoring depth with
corresponding working length
(working length =
clamping range)
Reduced anchoring depth with
corresponding working length (working length
= clamping range)
U washer (external
diameter x thickness)
mm
Price per 100
pieces
Pack-age con-tents
h2 hef, stand. tfix hef, red. tfix62644810 FAZ ll 8/10 GS 8 mm 65 mm 75 mm M 8 x 38 45 mm 10 mm - - 22 x 2.5 • 50 62644830 FAZ ll 8/30 GS 8 mm 85 mm 95 mm M 8 x 58 45 mm 30 mm - - 22 x 2.5 • 506264410101 FAZ ll 10/10 GS 10 mm 85 mm 95 mm M 10 x 53 60 mm 10 mm 40 mm 30 mm 25 x 3.0 • 50626441030 FAZ ll 10/30 GS 10 mm 105 mm 115 mm M 10 x 73 60 mm 30 mm 40 mm 50 mm 26 x 3.0 • 50626441210 FAZ ll 12/10 GS 12 mm 100 mm 110 mm M 12 x 61 70 mm 10 mm 50 mm 30 mm 30 x 3.0 • 20626441230 FAZ ll 12/30 GS 12 mm 120 mm 130 mm M 12 x 81 70 mm 30 mm 50 mm 50 mm 30 x 3.0 • 206264412160 FAZ ll 12/160 GS 12 mm 250 mm 260 mm M 12 x 186 70 mm 120 mm 50 mm 140 mm 30 x 3.0 • 206264416160 FAZ ll 16/160 GS 16 mm 270 mm 283 mm M 16 x 189 85 mm 160 mm 65 mm 180 mm 56 x 5.0 • 4
Continuation of Fischer FAZ II GS anchor bolts with large U washer
Fischer FAZ II K anchor bolt (short version)
galvanized DG 2014Item no. Type Drill Ø Min. bore-
hole depth for push-
through installation
Dowel length
Thread Ø x length
mm
Reduced anchoring depth
with corresponding working length
(working length = clamping range)
U washer (external
diameter x thickness)
Price per 100
pieces
Pack-age con-tents
h2 hef, red. tfix6264031010 FAZ ll 10/10 K 10 mm 65 mm 75 mm M 10 x 33 40 mm 10 mm 19 x 1.8 mm • 506264031020 FAZ ll 10/20 K 10 mm 75 mm 85 mm M 10 x 43 40 mm 20 mm 19 x 1.8 mm • 256264031210 FAZ ll 12/10 K 12 mm 80 mm 90 mm M 12 x 41 50 mm 10 mm 23 x 2.3 mm • 206264031220 FAZ ll 12/20 K 12 mm 90 mm 100 mm M 12 x 51 50 mm 20 mm 24 x 2.3 mm • 20
Stainless steel A4
DG 2017
Item no. Type Drill Ø Min. bore-hole depth
for push-through
installation
Dowel length
Thread Ø x length
mm
Reduced anchoring depth
with corresponding working length
(working length = clamping range)
U washer (external
diameter x thickness)
Price per 100
pieces
Pack-age con-tents
h2 hef, red. tfix6264041010 FAZ ll 10/10 K 10 mm 65 mm 75 mm M 10 x 33 40 mm 10 mm 19 x 1.8 mm • 506264041020 FAZ ll 10/20 K 10 mm 75 mm 85 mm M 10 x 43 40 mm 20 mm 19 x 1.8 mm • 506264041210 FAZ ll 12/10 K 12 mm 80 mm 90 mm M 12 x 41 50 mm 10 mm 23 x 2.3 mm • 206264041220 FAZ ll 12/20 K 12 mm 90 mm 100 mm M 12 x 51 50 mm 20 mm 24 x 2.3 mm • 20
772 www.keller-kalmbach.com
zinc-plated, large washer DG 2014Item no. Type Drill Ø Min. bore-
hole depth for push-
through installa-
tion
Dowel length
Thread Ø x length
mm
Reduced anchoring depth
with corresponding working length
(working length = clamping range)
U washer (external
diameter x thickness)
Price per 100
pieces
Pack-age con-tents
h2 hef, red. tfix6264051010 FAZ ll 10/10 GS 10 mm 65 mm 75 mm M 10 x 33 40 mm 10 mm 25 x 3.0 mm • 506264051210 FAZ ll 12/10 GS 12 mm 80 mm 90 mm M 12 x 41 50 mm 10 mm 30 x 3.0 mm • 20
Fischer FAZ II K anchor bolt (short version with large U washer)
Loads for Fischer FAZ II galv. zinc-plated / stainless steel A4 / highly corrosion-resistant steel C
i
The entire ETA - 05/0069 approval notice is to be observed for the measurement.1) The partial safety factors of the resistors governed in the approval as well as a partial safety factor of the effect γF = 1.4 are taken into consideration.2) A detailed dowel measurement, e.g. with the dimensioning software Compufix, is required for combinations of tensile and transverse loads or for transverse loads
with a lever arm (bending) as well as for reduced edge and axial spacing (dowel groups).3) At higher concrete strengths up to C50/60, permissible loads up to 55% higher are possible. See approval. The concrete is assumed to be normally reinforced.4) For smin, the associated value c and for cmin, the associated value s can be found in the approval.5) A split reinforcement is assumed that limits the crack width, taking account of the splitting forces, to Wk ~ 0.3 mm.
Permissible loads1) of a single dowel in cracked normal concrete (concrete tension zone) of strength C20/253) (~B25) minimum spacing while
the load is simultaneously reduced
Type effective anchoring
depth
minimum component thickness
installation torque
permissible tensile load
permissible transverse
load
necessary edge spacing (at an edge) for max. load
necessary axial spacing for max. load
min. axial spacing
min. edge spacing
hef[mm]
hmin[mm]
Tinst[Nm]
Nperm2)
[kN]Vzu
2)
[kN]Tensile load
c5)
[mm]
Transverse load
c[mm]
scr[mm]
smin4)
[mm]cmin
4)
[mm]
FAZ II 845
8020 2.4 6.9 40
170140 35 40
100 150FAZ II 10 40 80
45 4.38.7 60 220 120
4045
60100
11.460 250
18060
120 45 225 45FAZ II 12 50 100
606.1 13.9 75 315 150
5055
70120
7.6 16.9 75335
21060
140 310 55FAZ II 16 65
140110
9.0 20.7 100 380 195 6565
85 13.4 31.4 130585
26080
170 525 65FAZ II 20
100160
200 17.1 40.0 150680
300125 125
200 600 95 85FAZ II 24
125200
270 24.0 49.1 190725
380150 135
250 640 100 100
773order online: www.kk-shop.com
MKT bolt anchors BZ plus
Approved by the building authorities: European Technical Approval, Option 1, cracked concrete, approval no. ETA-99/0010 M 8 to M 24 for galvanically zinc-plated steel.Application: The MKT BZ-Plus bolt anchors are used to fasten medium-weight to heavy objects in concrete. Main areas of application include metal structures, wooden construction, substructures of wall paneling, machines and devices and much more.Properties: The MKT BZ-Plus bolt anchors can be installed in push-through procedure. The small bore diameter ensures time-saving installation.Installation instructions: Installation only permitted with torque wrench.Advantages:- 3-part expansion clip for optimal contact pressure against the borehole wall- small bore diameter- time-saving, economical installation - are permitted for higher tensile and transverse loads as well as for small axial and
edge spacing in comparison with various competitors
galvanized DG 2014Item no. Type Thread Drill Ø Overall
lengthClamp-
ing range,
max.
Bore-hole
depth
Setting depth
Price per 100 pieces
Pack-age con-tents
62117810 BZ 8/10/75 M 8 8 mm 75 mm 10 mm 60 mm 52 mm • 10062117815 BZ 8/15/80 M 8 8 mm 80 mm 15 mm 60 mm 52 mm • 10062117830 BZ 8/30/95 M 8 8 mm 95 mm 30 mm 60 mm 52 mm • 100621171010 BZ 10/10/90 M 10 10 mm 90 mm 10 mm 75 mm 68 mm • 50621171015 BZ 10/15/95 M 10 10 mm 95 mm 15 mm 75 mm 68 mm • 50621171020 BZ 10/20/100 M 10 10 mm 100 mm 20 mm 75 mm 68 mm • 50621171030 BZ 10/30/110 M 10 10 mm 110 mm 30 mm 75 mm 68 mm • 50621171050 BZ 10/50/130 M 10 10 mm 130 mm 50 mm 75 mm 68 mm • 5062117701215 BZ 70 M12-15/110 M 12 12 mm 110 mm 15 mm 90 mm 80 mm • 2562117701220 BZ 70 M12-20/115 M 12 12 mm 115 mm 20 mm 90 mm 80 mm • 2562117701230 BZ 70 M12-30/125 M 12 12 mm 125 mm 30 mm 90 mm 80 mm • 2562117701250 BZ 70 M12-50/145 M 12 12 mm 145 mm 50 mm 90 mm 80 mm • 2562117701265 BZ 70 M12-65/160 M 12 12 mm 160 mm 65 mm 90 mm 80 mm • 2562117701285 BZ 70 M12-85/180 M 12 12 mm 180 mm 85 mm 90 mm 80 mm • 25621177012105 BZ 70 M12-105/200 M 12 12 mm 200 mm 105 mm 90 mm 80 mm • 25621177012125 BZ 70 M12-125/220 M 12 12 mm 220 mm 125 mm 90 mm 80 mm • 25621177012145 BZ 70 M12-145/240 M 12 12 mm 240 mm 145 mm 90 mm 80 mm • 20621177012160 BZ 70 M12-160/255 M 12 12 mm 255 mm 160 mm 90 mm 80 mm • 20621171615 BZ 16/15/135 M 16 16 mm 135 mm 15 mm 110 mm 97 mm • 20621171625 BZ 16/25/145 M 16 16 mm 145 mm 25 mm 110 mm 97 mm • 20621171650 BZ 16/50/170 M 16 16 mm 170 mm 50 mm 110 mm 97 mm • 206211716100 BZ 16/100/220 M 16 16 mm 220 mm 100 mm 110 mm 97 mm • 106211716140 BZ 16/140/260 M 16 16 mm 260 mm 140 mm 110 mm 97 mm • 106211716180 BZ 16/180/300 M 16 16 mm 300 mm 180 mm 110 mm 97 mm • 10621172030 BZ 20/30/165 M 20 20 mm 165 mm 30 mm 125 mm 114 mm • 10621172060 BZ 20/60/195 M 20 20 mm 195 mm 60 mm 125 mm 114 mm • 10621172430 BZ 24/30/190 M 24 24 mm 190 mm 30 mm 145 mm 133 mm • 10
Continued on the next page
1 2 3 4
774 www.keller-kalmbach.com
Stainless steel A4 DG 2017Item no. Type Thread Drill Ø Overall
lengthClamp-
ing range,
max.
Bore-hole
depth
Setting depth
Price per 100 pieces
Pack-age con-tents
62116810 BZ 8/10/75 A4 M 8 8 mm 75 mm 10 mm 60 mm 52 mm • 10062116815 BZ 8/15/80 A4 M 8 8 mm 80 mm 15 mm 60 mm 52 mm • 10062116830 BZ 8/30/95 A4 M 8 8 mm 95 mm 30 mm 60 mm 52 mm • 100621161010 BZ 10/10/90 A4 M 10 10 mm 90 mm 10 mm 75 mm 68 mm • 50621161015 BZ 10/15/95 A4 M 10 10 mm 95 mm 15 mm 75 mm 68 mm • 50621161030 BZ 10/30/110 A4 M 10 10 mm 110 mm 30 mm 75 mm 68 mm • 50621161050 BZ 10/50/130 A4 M 10 10 mm 130 mm 50 mm 75 mm 68 mm • 5062116701215 BZ 70 M12-15/110 A4 M 12 12 mm 110 mm 15 mm 90 mm 80 mm • 2562116701220 BZ 70 M12-20/115 A4 M 12 12 mm 115 mm 15 mm 90 mm 80 mm • 2562116701230 BZ 70 M12-30/125 A4 M 12 12 mm 125 mm 30 mm 90 mm 80 mm • 2562116701250 BZ 70 M12-50/145 A4 M 12 12 mm 145 mm 50 mm 90 mm 80 mm • 25621161625 BZ 16/25/145 A4 M 16 16 mm 145 mm 25 mm 110 mm 97 mm • 20621161650 BZ 16/50/170 A4 M 16 16 mm 170 mm 50 mm 110 mm 97 mm • 20621162030 BZ 20/30/165 A4 M 20 20 mm 165 mm 30 mm 125 mm 114 mm • 10621162060 BZ 20/60/195 A4 M 20 20 mm 195 mm 60 mm 125 mm 114 mm • 10
Continuation of MKT bolt anchors BZ plus
Approved by the building authorities: European Technical Approval, Option 1, cracked concrete, M 8 to M 20 approval no. ETA-99/0010 for stainless steel A4 and HCR 1.4529.Application: The MKT BZ-Plus bolt anchors are used to fasten medium-weight to heavy objects in concrete. Main application areas include metal structures of all kinds and facade substructures.
1 2 3 4
The entire ETA - 99/0010 approval notice is to be observed for the measurement.1) The partial safety factors of the resistors governed in the approval as well as a partial safety factor of the effect γF = 1.4 are taken into consideration.2) A detailed dowel measurement, e.g. with the MKT dimensioning software, is required for combinations of tensile and transverse loads or for transverse loads with
a lever arm (bending) as well as for reduced edge and axial spacing (dowel groups).3) At higher concrete strengths up to C 50/60, permissible loads up to 55% higher are possible. See approval. The concrete is assumed to be normally reinforced.4) For smin, the associated value c and for cmin, the associated value s can be found in the approval.
Permissible loads1) of a single dowel in cracked normal concrete (concrete tension zone) of strength C20/253) (~B25) with standard component thickness
minimum spacing while the load is simultaneously
reducedType Material effective
anchoring depth
minimum com-
ponent thickness
installation torque
permissi-ble tensile
load
permis-sible
transverse load
necessary edge spacing (at an edge) for max. load
necessary axial spacing for max. load
min. axial spacing
min. edge spacing
hef[mm]
hhr[mm]
Tinst[Nm]
Nperm2)
[kN]Vzu
2)
[kN]Tensile load
c[mm]
Transverse load
c[mm]
scr[mm]
smin4)
[mm]cmin
4)
[mm]
BZplus M8
gzp46 100 20 2.4
8.669
195138 40 40
A4 7.4 165BZplus M10
gzp60 120
254.3
12.690
250180
45 45A4 35 11.4 225 50 55
BZplus 70 M12
gzp70 140
457.6 17.1 105
315 210 60 60
A4 50 315BZplus M16
gzp85
170 9011.9 26.9 127.5
440255 60 60
A4 160 110 455BZplus M20
gzp100 200
16017.1 34.3 150 505 300 95 95
A4 200BZplus M24
gzp 115 230 200 21.1 42.3 172.5 570 345 100 100A4 125 250 290 19.0 47.9 187.5 615 375 125 125
Loads for MKT BZ-plus bolt anchors, galvanically zinc-plated / stainless steel A4i
Continued on the next page
775order online: www.kk-shop.com
The entire ETA - 99/0010 approval notice is to be observed for the measurement.1) The partial safety factors of the resistors governed in the approval as well as a partial safety factor of the effect γF = 1.4 are taken into consideration.2) A detailed dowel measurement, e.g. with the MKT dimensioning software, is required for combinations of tensile and transverse loads or for transverse loads
with a lever arm (bending) as well as for reduced edge and axial spacing (dowel groups).3) At higher concrete strengths up to C 50/60, permissible loads up to 55% higher are possible. See approval. The concrete is assumed to be normally reinforced.4) For smin, the associated value c and for cmin, the associated value s can be found in the approval.
Permissible loads1) of a single dowel in cracked normal concrete (concrete tension zone) of strength C20/253) (~B25) with reduced component thickness (minimum component thickness
minimum spacing while the load is simultaneously
reducedType Material effective
anchoring depth
min. com-ponent
thickness
installation torque
per-missible tensile load
per-missible
transverse load
necessary edge spacing (at an edge) for max. load
necessary axial spacing for max. load
min. axial spacing
min. edge spacing
hef[mm]
hmin[mm]
Tinst[Nm]
Nperm2)
[kN]Vperm
2)
[kN]Tensile load
c[mm]
Transverse load
c[mm]
scr[mm]
smin4)
[mm]cmin
4)
[mm]
BZplus M8
gzp46 80 20 2.4
8.669
220138 40 40
A4 7.4 185BZplus M10
gzp60 100
254.3
12.690
280180 45 50
A4 35 11.4 250BZplus 70 M12
gzp70 120
457.6 17.1 105 340 210 60 60
A4 50BZplus M16
gzp85 140
9011.9 26.9 127.5 490 255 70 80
A4 110
Loads for MKT BZ-plus bolt anchors, galvanically zinc-plated / stainless steel A4i
MKT bolt anchors B
Approved by the building authorities: European Technical Approval, Option 7, non-cracked concrete, approval no. ETA-01/0013 M 6 to M 20.Application: The MKT B bolt anchors are used to fasten medium-weight to heavy objects in concrete. Main areas of application include metal structures, wooden construction, substructures of wall paneling, machines, devices and much more.Properties: The MKT B bolt anchors can be installed in push-through procedure. The small bore diameter ensures time-saving installation. The long cut thread makes additional application possibilities possible, such as stand-off installation or longer clamping ranges.Installation instructions: Installation only permitted with torque wrench.Advantages:- small bore diameter- time-saving, economical installation- various anchoring depths and therefore also applications at very low component
thicknesses are possible
Type B with threaded bolt and nut
galvanized DG 2027Item no. Type Thread Drill Ø Overall
lengthClamp-
ing range depending on setting
depth*
Setting depth*
Borehole depth*
Price per 100 pieces
Pack-age con-tents
620616540 B 6-5-40 M 6 6 mm 40 mm 5 mm 27 mm 35 mm • 10062061610 B 6-10-20/67 M 6 6 mm 67 mm 10 - 20 mm 49 - 39 mm 55 - 45 mm • 10062061805 B 8/5/50 M 8 8 mm 50 mm 5 mm 35 mm 45 mm • 10062061810 B 8-10-19/75 M 8 8 mm 75 mm 10 - 19 mm 56 - 47 mm 65 - 55 mm • 10062061815 B 8-15-24/80 M 8 8 mm 80 mm 15 - 24 mm 56 - 47 mm 65 - 55 mm • 10062061830 B 8-30-39/95 M 8 8 mm 95 mm 30 - 39 mm 56 - 47 mm 65 - 55 mm • 10062061845 B 8-45-54/110 M 8 8 mm 110 mm 45 - 54 mm 56 - 47 mm 65 - 55 mm • 10062061855 B 8-55-64/120 M 8 8 mm 120 mm 55 - 64 mm 56 - 47 mm 65 - 55 mm • 10062061101060 B 10/10/60 M 10 10 mm 60 mm 10 mm 40 mm 50 mm • 50620611010 B 10-10-16/85 M 10 10 mm 85 mm 10 - 16 mm 62 - 56 mm 70 - 65 mm • 50620611015 B 10-15-21/90 M 10 10 mm 90 mm 15 - 21 mm 62 - 56 mm 70 - 65 mm • 50620611020 B 10-20-26/95 M 10 10 mm 95 mm 20 - 26 mm 62 - 56 mm 70 - 65 mm • 50620611045 B 10-45-51/120 M 10 10 mm 120 mm 45 - 51 mm 62 - 56 mm 70 - 65 mm • 50620611070 B 10-70-76/145 M 10 10 mm 145 mm 70 - 76 mm 62 - 56 mm 70 - 65 mm • 50620611205 B 12/5/75 M 12 12 mm 75 mm 5 mm 55 mm 55 mm • 25
Continued on the next page
776 www.keller-kalmbach.com
hot-dip galvanized
DG 2027
Item no. Type Thread Drill Ø Overall length
Clamp-ing range
depending on setting
depth*
Setting depth*
Borehole depth*
Price per 100 pieces
Pack-age con-tents
620651015 B 10-15-21/90 M 10 10 mm 90 mm 15 - 21 mm 62 - 56 mm 70 - 65 mm • 50620651045 B 10-45-51/120 M 10 10 mm 120 mm 45 - 51 mm 62 - 56 mm 70 - 65 mm • 50620651215 B 12-15-30/110 M 12 12 mm 110 mm 15 - 30 mm 82 - 67 mm 90 - 75 mm • 25620651230 B 12-30-45/125 M 12 12 mm 125 mm 30 - 45 mm 82 - 67 mm 90 - 75 mm • 25620651630 B 16-30-48/150 M 16 16 mm 150 mm 30 - 48 mm 102 - 84 mm 110 - 95 mm • 20
Continuation of MKT B bolt anchor
galvanized DG 2027Item no. Type Thread Drill Ø Overall
lengthClamping
range depending on setting depth*
Setting depth*
Borehole depth*
Price per 100 pieces
Pack-age con-tents
620611215 B 12-15-30/110 M 12 12 mm 110 mm 15 - 30 mm 82 - 67 mm 90 - 75 mm • 25620611220 B 12-20-35/115 M 12 12 mm 115 mm 20 - 35 mm 82 - 67 mm 90 - 75 mm • 25620611230 B 12-30-45/125 M 12 12 mm 125 mm 30 - 45 mm 82 - 67 mm 90 - 75 mm • 25620611250 B 12-50-65/145 M 12 12 mm 145 mm 50 - 65 mm 82 - 67 mm 90 - 75 mm • 25620611285 B 12-85-100/180 M 12 12 mm 180 mm 85 - 100 mm 82 - 67 mm 90 - 75 mm • 256206112105 B 12-105-120/200 M 12 12 mm 200 mm 105 - 120 mm 82 - 67 mm 90 - 75 mm • 256206112125 B 12-125-140/220 M 12 12 mm 220 mm 125 - 140 mm 82 - 67 mm 90 - 75 mm • 256206112145 B 12-145-160/240 M 12 12 mm 240 mm 145 - 160 mm 82 - 67 mm 90 - 75 mm • 206206112160 B 12-160-175/255 M 12 12 mm 255 mm 160 - 175 mm 82 - 67 mm 90 - 75 mm • 20620611615 B 16/13/115 M 16 16 mm 115 mm 15 mm 84 mm 95 mm • 20620611630 B 16-30-48/150 M 16 16 mm 150 mm 30 - 48 mm 102 - 84 mm 110 - 95 mm • 20620611660 B 16-60-78/180 M 16 16 mm 180 mm 60 - 78 mm 102 - 84 mm 110 - 95 mm • 206206116100 B 16-100-118/220 M 16 16 mm 220 mm 100 - 118 mm 102 - 84 mm 110 - 95 mm • 106206116130 B 16-130-148/250 M 16 16 mm 250 mm 130 - 148 mm 102 - 84 mm 110 - 95 mm • 106206116165 B 16-165-183/285 M 16 16 mm 285 mm 165 - 183 mm 102 - 84 mm 110 - 95 mm • 10620612035 B 20-35-57/180 M 20 20 mm 180 mm 35 - 57 mm 121 - 99 mm 130 - 110 mm • 10620612060 B 20-60-82/205 M 20 20 mm 205 mm 60 - 82 mm 121 - 99 mm 130 - 110 mm • 10
Approved by the building authorities: European Technical Approval, Option 7, non-cracked concrete M 6 to M 20, approval no. ETA-05/0018 stainless steel A4. European Technical Approval for multi-fastener M 6, approval no. ETA-06/0155, stainless steel A4 and HCR 1.4529.Application: The MKT B bolt anchors are used to fasten medium-weight to heavy objects in concrete. Main application areas include metal structures and facade substructures.
Type B with threaded bolt and nut
Type B with threaded bolt and nut
Continued on the next page
Stainless steel A4
DG 2027
Item no. Type Thread Drill Ø Overall length
Clamp-ing range
depending on setting
depth*
Setting depth*
Borehole depth*
Price per 100 pieces
Package contents
62064610 B 6-10-20/67 M 6 6 mm 67 mm 10 - 20 mm 49 - 39 mm 55 - 45 mm • 10062064810 B 8-10-19/75 M 8 8 mm 75 mm 10 - 19 mm 56 - 47 mm 65 - 55 mm • 10062064815 B 8-15-24/80 M 8 8 mm 80 mm 15 - 24 mm 56 - 47 mm 65 - 55 mm • 10062064830 B 8-30-39/95 M 8 8 mm 95 mm 30 - 39 mm 56 - 47 mm 65 - 55 mm • 100
777order online: www.kk-shop.com
*) Different clamping ranges can be selected depending on the anchoring depths. Please not the reduced loads at a reduced setting depth.
Continuation of MKT B bolt anchor
Stainless steel A4 DG 2027
Item no. Type Thread Drill Ø Overall length
Clamp-ing range
depending on setting
depth*
Setting depth*
Borehole depth*
Price per 100 pieces
Pack-age con-tents
62064855 B 8-55-64/120 M 8 8 mm 120 mm 55 - 64 mm 56 - 47 mm 65 - 55 mm • 100620641010 B 10-10-16/85 M 10 10 mm 85 mm 10 - 16 mm 62 - 56 mm 70 - 65 mm • 50620641015 B 10-15-21/90 M 10 10 mm 90 mm 15 - 21 mm 62 - 56 mm 70 - 65 mm • 50620641020 B 10-20-26/95 M 10 10 mm 95 mm 20 - 26 mm 62 - 56 mm 70 - 65 mm • 50620641045 B 10-45-51/120 M 10 10 mm 120 mm 45 - 51 mm 62 - 56 mm 70 - 65 mm • 50620641215 B 12-15-30/110 M 12 12 mm 110 mm 15 - 30 mm 81 - 66 mm 90 - 75 mm • 25620641230 B 12-30-45/125 M 12 12 mm 125 mm 30 - 45 mm 81 - 66 mm 90 - 75 mm • 25620641250 B 12-50-65/145 M 12 12 mm 145 mm 50 - 65 mm 81 - 66 mm 90 - 75 mm • 25620641630 B 16-30-46/150 M 16 16 mm 150 mm 30 - 48 mm 102 - 84 mm 110 - 95 mm • 20620641660 B 16-60-78/180 M 16 16 mm 180 mm 60 - 76 mm 99 - 83 mm 110 - 95 mm • 20620642035 B 20-35-57/180 M 20 20 mm 180 mm 35 - 57 mm 121 - 99 mm 130 - 110 mm • 10
1 2 3 4
The entire ETA - 01/0013 approval notice is to be observed for the measurement.1) The partial safety factors of the resistors governed in the approval as well as a partial safety factor of the effect γF = 1.4 are taken into consideration.2) A detailed dowel measurement, e.g. with the MKT dimensioning software, is required for combinations of tensile and transverse loads or for transverse loads with
a lever arm (bending) as well as for reduced edge and axial spacing (dowel groups).3) At higher concrete strengths, permissible loads up to 55% higher are possible. See approval.
Permissible loads1) of a single dowel in non-cracked normal concrete (concrete pressure zone) of strength C20/253) (~B25)minimum spacing while
the load is simultaneously reduced
Type effective anchoring
depth
minimum component thickness
installation torque
permissible tensile load
permissible transverse
load
necessary edge spacing (at an edge) for max. load
necessary axial spacing for max. load
min. axial spacing
min. edge spacing
hef[mm]
hmin[mm]
Tinst[Nm]
Nperm2)
[kN]Vperm
2)
[kN]Tensile load
c[mm]
Transverse load
c[mm]
scr[mm]
smin[mm]
cmin[mm]
B M6 40 100 8 4.1 2.9 50 50 120 35 40B M8 44 100 15 5.7 6.3 85 95 132 40 45B M10 48 100 30 7.6 8.0 115 120 144 55 65B M12 65 130 50 12.6 14.3 165 185 195 75 90B M16 82 170 100 17.8 23.6 205 260 246 90 105B M20 100 200 200 24.0 37.1 250 375 300 105 125
Loads for MKT bolt anchor B galv. zinc-platedi
Type B with threaded bolt and nut
Continued on the next page
778 www.keller-kalmbach.com
The entire ETA - 01/0013 approval notice is to be observed for the measurement.1) The partial safety factors of the resistors governed in the approval as well as a partial safety factor of the effect γF = 1.4 are taken into consideration.2) A detailed dowel measurement, e.g. with the MKT dimensioning software, is required for combinations of tensile and transverse loads or for transverse loads with
a lever arm (bending) as well as for reduced edge and axial spacing (dowel groups).3) At higher concrete strengths, permissible loads up to 55% higher are possible. See approval.
Permissible loads1) of a single dowel in non-cracked normal concrete (concrete pressure zone) of strength C20/253) (~B25)minimum spacing while
the load is simultaneously reduced
Type effective anchoring
depth
minimum component thickness
installation torque
permissible tensile load
permissible transverse
load
necessary edge spacing (at an edge) for max. load
necessary axial spacing for max. load
min. axial spacing
min. edge spacing
hef[mm]
hmin[mm]
Tinst[Nm]
Nperm2)
[kN]Vperm
2)
[kN]Tensile load
c[mm]
Transverse load
c[mm]
scr[mm]
smin[mm]
cmin[mm]
B M10 48 100 30 7.6 8.0 115 120 144 55 65B M12 65 130 40 12.6 14.3 165 185 195 75 90B M16 82 170 90 17.8 23.6 205 260 246 90 105
Loads for MKT bolt anchor B steel, hot-dip galvanized i
The entire ETA - 01/0013 approval notice is to be observed for the measurement.1) The partial safety factors of the resistors governed in the approval as well as a partial safety factor of the effect γF = 1.4 are taken into consideration.2) A detailed dowel measurement, e.g. with the MKT dimensioning software, is required for combinations of tensile and transverse loads or for transverse loads
with a lever arm (bending) as well as for reduced edge and axial spacing (dowel groups).3) At higher concrete strengths, permissible loads up to 55% higher are possible. See approval.4) For smin, the associated value c and for cmin, the associated value s can be found in the approval.
Permissible loads1) of a single dowel in non-cracked normal concrete (concrete pressure zone) of strength C20/253) (~B25) for standard anchoring depths
minimum spacing while the load is simultaneously
reducedType effective
anchoring depth
minimum component thickness
installation torque
permissible tensile load
permissible transverse
load
necessary edge spacing (at an edge) for max. load
necessary axial spacing for max. load
min. axial spacing
min. edge spacing
hef[mm]
hmin[mm]
Tinst[Nm]
Nperm2)
[kN]Vperm
2)
[kN]Tensile load
c[mm]
Transverse load
c[mm]
scr[mm]
smin4)
[mm]cmin
4)
[mm]
B M6 40 100 6 3.6 4.0 80 65 120 35 35B M8 44 100 15 5.7 6.9 110 105 132 35 45B M10 48 100 25 7.6 8.0 120 120 144 45 55B M12 65 130 50 11.9 15.4 170 200 195 60 70B M16 80 160 100 17.2 28.6 205 335 240 80 80B M20 100 200 160 24.0 43.9 280 450 300 100 100
Loads for MKT bolt anchor B stainless steel A4 i
779order online: www.kk-shop.com
MKT bolt anchor BU
Approved by the building authorities: European Technical Approval, Option 7, non-cracked concrete M12 and M16, approval no. ETA-01/0013 for galvanically zinc-plated steel.Application: The MKT BU bolt anchors with a large washer according to DIN 440 are primarily used in wooden construction for fastening purlins and for general wooden structures.Properties: The MKT BU bolt anchors can be installed in the push-through procedure. The small bore diameter ensures time-saving installation. The long cut thread also permits longer clamping ranges at lower anchoring depths. Washers Ø at M 12 44 mm, washers Ø at M 16 56 mm.Installation instructions: Installation only permitted with torque wrench.Advantages:- the large washers distribute the preload force to a larger surface and therefore
reduce pressing into mounting parts made of wood- small borehole diameter- time-saving, economical installation- various anchoring depths and therefore also applications at very low component
thicknesses are possible
galvanized DG 2027
Item no. Type Thread Drill Ø Overall length
Clamping range
depending on setting depth*
Setting depth*
Borehole depth*
Price per 100 pieces
Pack-age con-tents
620661285 BU 12/85/180 M 12 12 mm 180 mm 85 - 100 mm 82 - 67 mm 90 - 75 mm • 256206612105 BU 12/105/200 M 12 12 mm 200 mm 105 - 120 mm 82 - 67 mm 90 - 75 mm • 256206612125 BU 12/125/220 M 12 12 mm 220 mm 125 - 140 mm 82 - 67 mm 90 - 75 mm • 256206612145 Bu 12/145/240 M 12 12 mm 240 mm 145 - 160 mm 82 - 67 mm 90 - 75 mm • 206206612160 BU 12/160/255 M 12 12 mm 255 mm 160 - 175 mm 82 - 67 mm 90 - 75 mm • 206206612190 BU 12/190/285 M 12 12 mm 285 mm 190 - 205 mm 82 - 67 mm 90 - 75 mm • 206206612230 BU 12/230/325 M 12 12 mm 325 mm 230 - 245 mm 82 - 67 mm 90 - 75 mm • 206206616165 BU 16/165/285 M 16 16 mm 285 mm 165 - 183 mm 102 - 84 mm 110 - 95 mm • 106206616200 BU 16/200/320 M 16 16 mm 320 mm 200 - 218 mm 102 - 84 mm 110 - 95 mm • 0*) Different clamping ranges can be selected depending on the anchoring depths. Please not the reduced loads at a reduced setting depth.
The entire ETA - 01/0013 approval notice is to be observed for the measurement.1) The partial safety factors of the resistors governed in the approval as well as a partial safety factor of the effect γF = 1.4 are taken into consideration.2) A detailed dowel measurement, e.g. with the MKT dimensioning software, is required for combinations of tensile and transverse loads or for transverse loads with
a lever arm (bending) as well as for reduced edge and axial spacing (dowel groups).3) At higher concrete strengths, permissible loads up to 55% higher are possible. See approval.4) For smin, the associated value c and for cmin, the associated value s can be found in the approval.
Permissible loads1) of a single dowel in non-cracked normal concrete (concrete pressure zone) of strength C20/253) (~B25)minimum spacing while
the load is simultaneously reduced
Type effective anchoring
depth
minimum component thickness
installation torque
permissible tensile load
permissible transverse
load
necessary edge spacing (at an edge) for max. load
necessary axial spacing for max. load
min. axial spacing
min. edge spacing
hef[mm]
hmin[mm]
Tinst[Nm]
Nperm2)
[kN]Vperm
2)
[kN]Tensile load
c[mm]
Transverse load
c[mm]
scr[mm]
smin4)
[mm]cmin
4)
[mm]
B M12 65 130 50 12.6 14.3 165 185 195 75 90B M16 82 170 100 17.8 23.6 205 260 246 90 105
Loads for MKT bolt anchor BU galv. zinc-plated i
Type BU with large washer DIN 440
780 www.keller-kalmbach.com
Fischer express anchor EXA
Approved by the building authorities: European Technical Approval, Option 7, non-cracked concrete, M8 to M20 approval no. ETA-05/0185 for galvanically zinc-plated steel.Application: The Fischer EXA express anchors are used to fasten medium-weight to heavy objects in concrete. Main areas of application include metal structures, wooden construction, substructures of wall paneling, machines, devices and much more.Properties: The Fischer EXA express anchors can be installed in a push-through procedure. The small bore diameter ensures time-saving installation.Installation instructions: Installation only permitted with torque wrench.Advantages:- small bore diameter- time-saving, economical installation
galvanized DG 2024
Item no. Type Thread Drill Ø Overall length
Clamping range, max.
Drilled hole depth through
the compo-nent to be connected
Price per 100 pieces
Package contents
62060610 6/10/70* M 6 6 mm 70 mm 10 mm 70 mm • 10062060640 6/40/100* M 6 6 mm 100 mm 40 mm 100 mm • 10062060805 8/5/60* M 8 8 mm 60 mm 5 mm 60 mm • 5062060815 8/15/82 M 8 8 mm 85 mm 15 mm 80 mm • 5062060828 8/28/95 M 8 8 mm 98 mm 28 mm 95 mm • 5062060855 8/55/122 M 8 8 mm 125 mm 55 mm 120 mm • 50620608100 8/100/167 M 8 8 mm 170 mm 100 mm 165 mm • 50620601005 10/5/70* M 10 10 mm 70 mm 5 mm 65 mm • 50620601015 10/15/90 M 10 10 mm 92 mm 15 mm 85 mm • 50620601045 10/45/120 M 10 10 mm 122 mm 45 mm 115 mm • 50620601090 10/90/165 M 10 10 mm 167 mm 90 mm 160 mm • 506206010140 10/140/215 M 10 10 mm 217 mm 140 mm 210 mm • 25620601205 12/5/80* M 12 12 mm 80 mm 5 mm 75 mm • 25620601215 12/15/113 M 12 12 mm 116 mm 15 mm 105 mm • 25620601235 12/35/133 M 12 12 mm 136 mm 35 mm 125 mm • 25620601255 12/55/153 M 12 12 mm 156 mm 55 mm 145 mm • 25620601285 12/85/183 M 12 12 mm 186 mm 85 mm 175 mm • 256206012105 12/105/203 M 12 12 mm 206 mm 105 mm 195 mm • 25620601630 16/30/153 M 16 16 mm 153 mm 30 mm 140 mm • 10620601675 16/75/198 M 16 16 mm 198 mm 75 mm 185 mm • 20*) These sizes are not included in the approval.
1 2 3 4
Continued on the next page
781order online: www.kk-shop.com
The entire ETA - 05/0185 approval notice is to be observed for the measurement.1) The partial safety factors of the resistors governed in the approval as well as a partial safety factor of the effect yF = 1.4 are taken into consideration.2) A detailed dowel measurement, e.g. with the dimensioning software Compufix, is required for combinations of tensile and transverse loads or for transverse loads
with a lever arm (bending) as well as for reduced edge and axial spacing (dowel groups).3) At higher concrete strengths, permissible loads up to 55% higher are possible. See approval.4) For smin, the associated value c and for cmin, the associated value s can be found in the approval.
Permissible loads1) of a single dowel in non-cracked normal concrete (concrete pressure zone) of strength C20/253) (~B25)minimum spacing while
the load is simultaneously reduced
Type effective anchoring
depth
minimum component thickness
installation torque
permissible tensile load
permissible transverse
load
necessary edge spacing (at an edge) for max. load.
necessary axial spacing for max. load
min. axial spacing
min. edge spacing
hef[mm]
hmin[mm]
Tinst[Nm]
Nperm2)
[kN]Vperm
2)
[kN]c
[mm]c
[mm]scr
[mm]smin
4)
[mm]cmin
4)
[mm]EXA M8 47 100 14 4.1 6.2 110 90 141 45 40EXA M10 49 100 30 6.3 8.2 155 125 147 50 65EXA M12 67 135 60 9.9 11.0 190 135 201 75 90EXA M16 85 170 80 16.7 27.8 185 310 255 85 90EXA M20 103 205 140 24.8 40.9 255 410 309 105 100
Loads for bolt anchor EXA galv. zinc-platedi
1) Necessary safety factor is taken into consideration.2) Detailed dowel dimensioning is required for combinations of tensile and transverse loads.
Loads for EXA bolt anchor galv. zinc-plated and EXA-IG internally threaded anchor galv. zinc-plated / stainless steel A4
i
Permissible loads1) of a single dowel in non-cracked normal concrete (concrete tension zone) of strength C20/25 (~B25)
Type Material effective anchoring depth
minimum component thickness
installation torque
recommended tensile load
recommended transverse load
char. axial spacing
char. edge spacing
hef[mm]
hmin[mm]
Tinst[Nm]
Nrecom’d2)
[kN]Vrecom’d
2)
[kN]scr,N
[mm]csr,N
[mm]EXA M6 K gzp 24 70 5 1.5 1.6 72 36EXA M8 K gzp 28 90 15 2.1 2.8 84 42EXA M10 K gzp 30 100 25 3.0 4.0 90 45EXA - IG M6
gzp45 100 8
3.41.5 135 68
A4 2.7EXA - IG M8
gzp45 110 15 4.0 2.6 135 68
A4EXA - IG M10
gzp45 120 25
7.43.9 135 68
A4 6.6EXA - IG M12
gzp75 150 50 12.3 6.3 225 113
A4
782 www.keller-kalmbach.com
Fischer Zykon bolt anchor FZA
Approved by the building authorities: European Technical Approval, Option 1, cracked concrete M 6 to M 16, approval no. ETA-98/0004 for galvanically zinc-plated steel, stainless steel A4 and HCR 1.4529.Application: The Fischer Zykon FZA bolt anchors are used to fasten heavy objects in concrete. Main application areas include heavy metal structures, cable lines and much more. Ideal anywhere where low setting depths and axial and edge spacing are required.Properties: Concrete undercut system. The Fischer Zykon bolt anchors FZA are set in a pre-installation procedure. They have almost no expansion pressure and permit very low anchoring depths and axial and edge spacing. Zykon anchors are offered in 3 designs (bolt anchor/pre-installation anchor - through anchor - internally threaded anchor).Installation instructions: Installation only permitted with torque wrench.Advantages:- almost free of expansion pressure, therefore minimum borehole depths, as well as
axial and edge spacing- positive locking anchoring - economical, single-stage drilling method for drilling the undercutNote: To create the tapered boreholes and to insert the dowel, it is necessary to use original Fischer FZUB and FZE tools. Neither are included in the price of the Zykon anchor.
galvanized DG 2031Item no. Type Thread Drill Ø Clamping
range, max.Anchoring
depthPrice per
100 piecesPackage contents
624601040 FZA 10/40 M 6/10 M 6 10 mm 10 mm 40 mm • 25624601240 FZA 12/40 M 8/15 M 8 12 mm 15 mm 40 mm • 25624601250 FZA 12/50 M 8/15 M 8 12 mm 15 mm 50 mm • 20624601440 FZA 14/40 M 10/25 M 10 14 mm 25 mm 40 mm • 25624601880 FZA 18/80 M 12/25 M 12 18 mm 25 mm 80 mm • 106246022100 FZA 22/100 M 16/60 M 16 22 mm 60 mm 100 mm • 106246022125 FZA 22/125 M 16/60 M 16 22 mm 60 mm 125 mm • 6
Stainless steel A4 DG 2040
Item no. Type Thread Drill Ø Clamping range, max.
Anchoring depth
Price per 100 pieces
Package contents
624621040 FZA 10/40 M 6/10A4 M 6 10 mm 10 mm 40 mm • 25624621240 FZA 12/40 M 8/15A4 M 8 12 mm 15 mm 40 mm • 25624621440 FZA 14/40 M 10/25A4 M 10 14 mm 25 mm 40 mm • 20624621460 FZA 14/60 M 10/25A4 M 10 14 mm 25 mm 60 mm • 10624621880 FZA 18/80 M 12/25A4 M 12 18 mm 25 mm 80 mm • 106246222100 FZA 22/100 M 16/60A4 M 16 22 mm 60 mm 100 mm • 10
1 2 3 4 5
Continued on the next page
Shock approval from the Federal Office for Civil Protection, Bonn
Shock approval from the Federal Office for Civil Protection, Bonn
783order online: www.kk-shop.com
Loads for ZYKON FZA undercut anchors galv. zinc-plated / stainless A4 / highly corrosion-resistant steel C
i
Permissible loads1) of a single dowel in cracked normal concrete (concrete pressure zone) of strength C20/253) (~B25)minimum spacing while the
load is simultaneously reduced
Type Material effective anchoring
depth
minimum com-
ponent thickness
instal-lation torque
per-missible tensile load
per-missible trans-verse load
necessary edge spacing (at an edge)
for max. load.
necessary axial spacing for max. load
min. axial spacing
min. edge spacing
hef[mm]
hmin[mm]
Tinst[Nm]
Nperm2)
[kN]Vperm
2)
[kN]
Tensile loadccr,N
[mm]
Transverse load
c[mm]
scr[mm]
smin[mm]
cmin[mm]
FZA 10 x 40 M6
gzp40 100 8.5 2.4
4.660
95120 40 35A4 3.2 65
C 4.0 85
FZA 12 x 40 M8
gzp40 100 20 2.4 5.6 60 120 120 40 40A4
C
FZA 14 x 40 M10
gzp40 100 40 2.4 5.6 60 115 120 70 70A4
C
FZA 12 x 50 M8
gzp50 110 20 4.3
7.975
160150 50 45A4 5.8 115
C 7.3 145
FZA 14 x 60 M10
gzp60 130 40 5.7
13.390
250180 60 55A4 9.3 165
C 11.6 215
FZA 18 x 80 M12
gzp80 160 60 9.5
19.3120
315240 80 70A4 13.5 210
C 16.9 270
FZA 22 x 100 M16
gzp100 200 100 17.1
34.3150
500300 100 100A4 25.2 355
C 31.4 455
FZA 22 x 125 M16
gzp125 250 100 19.0
35.9190
450375 125 125A4 25.2 300
C 31.4 385
The entire ETA - 98/0004 approval notice is to be observed for the measurement.1) The partial safety factors of the resistors governed in the approval as well as a partial safety factor of the effect yF = 1.4 are taken into consideration.2) A detailed dowel measurement, e.g. with the dimensioning software Compufix, is required for combinations of tensile and transverse loads or for transverse loads
with a lever arm (bending) as well as for reduced edge and axial spacing (dowel groups).3) At higher concrete strengths, permissible loads up to 55% higher are possible
784 www.keller-kalmbach.com
Fischer Zykon FZA-D push-through anchor
Approved by the building authorities: European Technical Approval, Option 1, cracked concrete M 6 to M 16, approval no. ETA-98/0004 for galvanically zinc-plated steel, stainless steel A4 and HCR 1.4529.Application: The Fischer Zykon FZA-D push-through anchors are used to fasten heavy objects in concrete. Main application areas include heavy metal structures, cable lines and much more. Ideal anywhere where low setting depths and edge spacing are required.Properties: Concrete undercut system. The Fischer Zykon bolt anchors FZA are set in a pre-installation procedure. They have almost no expansion pressure and permit very low anchoring depths and axial and edge spacing. Zykon anchors are offered in 3 designs (bolt anchor/pre-installation anchor - through anchor - internally threaded anchor).Installation instructions: Installation only permitted with torque wrench.Advantages:- almost free of expansion pressure, therefore very low borehole depths, as well as
axial and edge spacing- positive locking anchoring - economical, single-stage drilling method for drilling the undercutNote: To create the tapered boreholes and to insert the dowel, it is necessary to use original Fischer FZUB and FZE tools. Neither are included in the price of the Zykon anchor.
galvanized DG 2031
Item no. Type Thread Drill Ø Clamping range, max.
Anchoring depth
Price per 100 pieces
Package contents
624701260 FZA 12/60 M 8D10 M 8 12 mm 10 mm 50 mm • 25624701480 FZA 14/80 M 10D20 M 10 14 mm 20 mm 60 mm • 106247014100 FZA 14/100 M 10D40 M 10 14 mm 40 mm 60 mm • 106247018100 FZA 18/100 M 12D20 M 12 18 mm 20 mm 80 mm • 106247022125 FZA 22/125 M 16D25 M 16 22 mm 25 mm 100 mm • 10
Stainless steel A4 DG 2040
Item no. Type Thread Drill Ø Clamping range, max.
Anchoring depth
Price per 100 pieces
Package contents
624721260 FZA 12/60 M 8D10 A4 M 8 12 mm 10 mm 50 mm • 25624721280 FZA 12/80 M 8D30 A4 M 8 12 mm 30 mm 50 mm • 25624721480 FZA 14/80 M 10D20 A4 M 10 14 mm 20 mm 60 mm • 106247218100 FZA 18/100 M 12D20 A4 M 12 18 mm 20 mm 80 mm • 106247222125 FZA 22/125 M 16D25 A4 M 16 22 mm 25 mm 100 mm • 10
1 2 3 4 5
Continued on the next page
Shock approval from the Federal Office for Civil Protection, Bonn
Shock approval from the Federal Office for Civil Protection, Bonn
785order online: www.kk-shop.com
Loads for ZYKON undercut anchors FZA-D galv. zinc-plated / stainless steel A4 / highly corrosion-resistant C
i
Permissible loads1)3) of a single dowel in cracked normal concrete (concrete pressure zone) of strength C20/25 4) (~B25)minimum spacing while the
load is simultaneously reduced
Type Material effective anchoring
depth
minimum com-
ponent thickness
instal-lation torque
per-missible tensile load
per-missible trans-verse load
necessary edge spacing (at an edge)
for max. load.
necessary axial spacing for max. load
min. axial spacing
min. edge spacing
hef[mm]
hmin[mm]
Tinst[Nm]
Nperm2)
[kN]Vperm
2)
[kN]
Tensile loadccr,N
[mm]
Transverse load
c[mm]
scr[mm]
smin[mm]
cmin[mm]
FZA 12 x 50 M8 D
gzp40 100 20 2.4 5.6 60 120 120 40 35A4
C
FZA 12 x 60 M8 D
gzp50 110 20 4.3
7.975
160150 50 45A4 5.9 115
C 7.3 145
FZA 12 x 80 M8 D
gzp50 110 20 4.3
7.975
160150 50 45A4 5.9 115
C 7.3 145
FZA 14 x 80 M10 D
gzp60 130 40 5.7
13.390
250180 60 55A4 9.3 165
C 11.6 215FZA 14 x 100 M10 D
gzp60 130 40 5.7
13.390
250180 60 55
A4 9.3 165
FZA 18 x 100 M12 D
gzp80 160 60 9.5
19.3120
315240 80 70A4 13.5 210
C 16.9 270
FZA 18 x 130 M12 D
gzp80 160 60 9.5
19.3120
315240 80 70A4 13.5 210
C 16.9 270FZA 22 x 125 M16 D
gzp100 200 100 17.1
34.3150
500300 100 100
A4 25.2 355
The entire ETA - 98/0004 approval notice is to be observed for the measurement.1) The partial safety factors of the resistors governed in the approval as well as a partial safety factor of the effect yF = 1.4 are taken into consideration.2) A detailed dowel measurement, e.g. with our dimensioning software Compufix, is required for combinations of tensile and transverse loads or for transverse loads
with a lever arm (bending) as well as for reduced edge and axial spacing (dowel groups).3) At higher concrete strengths, permissible loads up to 55% higher are possible. See approval. The concrete is assumed to be normally reinforced.
786 www.keller-kalmbach.com
Fischer Zykon FZA-I internally threaded anchor
Approved by the building authorities: European Technical Approval, Option 1, cracked concrete M 6 to M 16, approval no. ETA-98/0004 for galvanically zinc-plated steel, stainless steel A4 and HCR 1.4529.Application: The Fischer Zykon FZA-I internally threaded anchors are used to fasten heavy objects in concrete. Main application areas include heavy metal structures, cable lines and much more. Ideal anywhere where low setting depths and axial and edge spacing are required.Properties: Concrete undercut system. The Fischer Zykon bolt anchors FZA are set in a pre-installation procedure. They have almost no expansion pressure and permit very low anchoring depths and axial and edge spacing. Zykon anchors are offered in 3 designs (bolt anchor/pre-installation anchor - through anchor - internally threaded anchor).Installation instructions: Installation only permitted with torque wrench.Advantages:- almost free of expansion pressure, therefore minimum borehole depths, as well as
axial and edge spacing- positive locking anchoring - economical, single-stage drilling method for drilling the undercutNote: To create the tapered boreholes and to insert the dowel, it is necessary to use original Fischer FZUB and FZE tools. Neither are included in the price of the Zykon anchor.
galvanized DG 2031Item no. Type Thread Drill Ø Anchoring
depthScrew-in
depth min.Screw-in
depth max.Price per
100 piecesPackage contents
624711460 FZA 14/60 M 8i M 8 14 mm 60 mm 11 mm 17 mm • 20624711880 FZA 18/80 M 10i M 10 18 mm 80 mm 13 mm 21 mm • 106247122100 FZA 22/100 M 12i M 12 22 mm 100 mm 15 mm 25 mm • 10
Stainless steel A4 DG 2040Item no. Type Thread Drill Ø Anchoring
depthScrew-in
depth min.Screw-in
depth max.Price per
100 piecesPackage contents
624731880 FZA 18/80 M 10i A4 M 10 18 mm 80 mm 13 mm 21 mm • 10
1 2 3 4 5
Continued on the next page
Shock approval from the Federal Office for Civil Protection, Bonn
Shock approval from the Federal Office for Civil Protection, Bonn
787order online: www.kk-shop.com
Permissible loads1) of a single dowel in cracked normal concrete (concrete pressure zone) of strength C20/254) (~B25)minimum spacing while the
load is simultaneously reduced
Type Material effective anchoring
depth
minimum com-
ponent thickness
instal-lation torque
per-missible tensile load
per-missible trans-verse load
necessary edge spac-ing (at an edge) for
max. load.
necessary axial spacing for max. load
min. axial spacing
min. edge spacing
hef[mm]
hmin[mm]
Tinst[Nm]
Nperm2)
[kN]Vperm
2)
[kN]
Tensile loadccr,N
[mm]
Transverse load
c[mm]
scr[mm]
smin[mm]
cmin[mm]
FZA 12 x 40 M6 I
gzp40 100 8.5 2.4
4.160
85120 40 35
A4 3.2 65FZA 12 x 50 M6 I
gzp50 110 8.5 4.3
4.175
75150 50 45
A4 3.2 65FZA 14 x 60 M8 I
gzp60 130 15 5.7
5.490
90180 60 55
A4 4.3 75FZA 18 x 80 M10 I
gzp80 160 30
9.5 5.6120
85240 80 70
A4 9.0 5.4 85FZA 22 x100 M12 I
gzp100 200 60 17.1
13.2150
165300 100 100
A4 12.7 155FZA 22 x125 M12 I
gzp125 250 60 19.0
13.2190
150375 125 125
A4 12.7 145
The entire ETA - 98/0004 approval notice is to be observed for the measurement.1) The partial safety factors of the resistors governed in the approval as well as a partial safety factor of the effect yF = 1.4 are taken into consideration.2) A detailed dowel measurement, e.g. with the dimensioning software Compufix, is required for combinations of tensile and transverse loads or for transverse loads
with a lever arm (bending) as well as for reduced edge and axial spacing (dowel groups).3) For screw strength class 8.8 (gzp) and A4-70 (A4).4) At higher concrete strengths, permissible loads up to 55% higher are possible. See approval. The concrete is assumed to be normally reinforced.
Loads for ZYKON undercut anchors FZA-I galv. zinc-plated / stainless steel A4 i
Fischer Zykon anchor crampon fastener
Approved by the building authorities: The Zykon FZA anchor crampon fastener is part of the general approval for Fischer Zykon anchor approval no. ETA-98/0004 and is regulated for fastening crampons in concrete and masonry according to DIN 1211-3 and 1212-3.Application: The Zykon FZA-ST crampon fasteners are used to fasten crampons according to DIN 1211-3 and 1212-3.Properties: Concrete undercut system. The Fischer Zykon FZA crampon fasteners are set in a pre-installation procedure. They have almost no expansion pressure and permit very low anchoring depths and axial and edge spacing.Installation instructions: Installation only permitted with torque wrench.Advantages: - almost free of expansion pressure, therefore minimum borehole depths, as well as
axial and edge spacing- positive locking anchoring - economical, single-stage drilling method for drilling the undercutNote: To create the tapered boreholes and to insert the dowel, it is necessary to use original Fischer FZUB and FZE tools. Neither are included in the price of the crampon fastener.
Stainless steel A4 DG 2040Item no. Type Thread Drill Ø Clamping
rangeMinimum
anchoring depth
Price per 100 pieces
Package contents
624611440 FZA 14/40 ST A4 M 10 14 mm 30 mm 40 mm • 20624611460 FZA 14/60 ST A4 M 10 14 mm 30 mm 60 mm • 20
788 www.keller-kalmbach.com
Fischer Zykon universal drill bit FZUB
Application: This tool is used to drill and undercut holes for the Fischer FZA Zykon anchor as well as for the Fischer Zykon FZEA knock-in anchors.Properties: The Zykon FZUB universal drill bit drills and undercuts in one work step without the need to change tools.
DG 2033
Item no. Type for all 3 cyclone types with designation
Price per piece Package contents
624681040 FZUB 10/40 FZA 10/40 • 1624681240 FZUB 12/40 FZA 12/40 • 1624681250 FZUB 12/50 FZA 12/50 • 1624681260 FZUB 12/60 FZA 12/60 • 1624681280 FZUB 12/80 FZA 12/80 • 1624681440 FZUB 14/40 FZA 14/40 • 1624681460 FZUB 14/60 FZA 14/60 • 1624681480 FZUB 14/80 FZA 14/80 • 16246814100 FZUB 14/100 FZA 14/100 • 1624681880 FZUB 18/80 FZA 18/80 • 16246818100 FZUB 18/100 FZA 18/100 • 16246818130 FZUB 18/130 FZA 18/130 • 16246822100 FZUB 22/100 FZA 22/100 • 16246822125 FZUB 22/125 FZA 22/125 • 1
1 2 3 4 5
Internally threaded anchor Through anchor Bolt anchors
Fischer Zykon knock-in tool FZE plus
Application: The Zykon FZE plus knock-in tool is used to set Fischer Zykon anchors. The centering pin for the internally threaded design is included.
DG 2033
Item no. Type for all 3 cyclone types with designation
Price per piece Package contents
6246510 FZE 10 plus FZA 10 • 16246512 FZE 12 plus FZA 12 • 16246514 FZE 14 plus FZA 14 • 16246518 FZE 18 plus FZA 18 • 16246522 FZE 22 plus FZA 22 • 1
789order online: www.kk-shop.com
Fischer Zykon hammerset anchor FZEA II
Approved by the building authorities: European Technical Approval, Option 1, cracked concrete M 8 to M 12, approval no. ETA-06/0271 for galvanically zinc-plated steel, stainless steel A4 and HCR 1.4529.Application: The Fischer Zykon FZEA II hammerset anchors are used to fasten light to heavy objects in concrete. Main application areas include suspending pipes, ven-tilation ducts or sprinkler systems in sanitary, heating and ventilation engineering as well as fastening suspended ceilings.Properties: Low setting depths. Almost free of expansion pressure for minimum axial and edge spacing. Easy, repeated loosening and refastening of fixtures is possible.Installation instructions: Installation only permitted with torque wrench.Advantages:- concrete undercut, positive locking anchoring- economical, single-stage drilling method for drilling the undercut- optical settin