Post on 24-Oct-2015
description
ISO STANDARDS ON FIRE SAFETY
Ali Irfan KhawajaDirector, FPAP
Manager Technical, NQA Pakistan
PRESENTATION COVERS …….History of Fire Safety Legislations.History of ISO and standardization.Fire Safety standardizationISO standards on fire Safety
History of Fire Safety and Legislations
1900 :Report from the Select Committee on Fire Brigades
1923: Report of the Royal Commission on Fire Brigades and Fire Prevention
1947 :Fire service act1971: The Fire Precautions (Workplace) Regulations 1971
History of Fire Legislations
• FPA – UK• NFPA-USA• FPA-NZ• Canadian fire safety association• IMO• FPA-Pakistan
Major contributors of Fire Safety Standardization / Codes
History of ISO and Standardization
ISO History
ISO (International Organization for Standardization) is the world’s largest developer of voluntary International Standards.
ISO History
founded in 1947, with 67 official TCs and since then have published more than 19 500 International Standards covering almost all aspects of technology and business.
ISO History
Today ISO have members from 164 countries and about 150 people work full time for ISO Central Secretariat in Geneva, Switzerland.
Fire Safety Standardization
Technical Committee (TC) The technical work is carried out
through technical committees (TC's) which are established by the Technical Management Board (TMB).
TC's establish their own subcommittees (SC's) and working groups (WG's) to undertake the work.
Each and SC has a secretariat assigned to a member body for eg. BSI, DIN, AFNOR, ANSI, JISC, UKAS, NQA etc
Technical Committee (TC) TC 92 – Fire Safety TC 92 / SC1 - Fire Initiation and Growth. TC 92 / SC2 - Fire Containment TC 92 / SC3 - Fire Threat to People and Environment TC 92 / SC4 - Fire Safety Engineering
ISO Standards on Fire Safety
ISO Standards ……. ISO/TS 13447:2013
Fire safety engineering -- Guidance for use of fire zone models ISO 16730:2008
Fire safety engineering -- Assessment, verification and validation of calculation methods.
ISO 13943:2008
Fire safety -- vocabularyISO 23932:2009
Fire safety engineering -- General principlesISO/TS 24679:2011
Fire safety engineering -- Performance of structures In fire
ISO Standards …….ISO/NP 16730-1
Fire safety engineering -- Assessment, verification and validation of calculation methods -- Part 1: General.
ISO/TR 16730-2:2013Fire safety engineering -- Assessment, verification and validation of calculation methods -- Part 2: Example of a fire zone model.
ISO/TR 16730-3:2013Fire safety engineering -- Assessment, verification and validation of calculation methods -- Part 3: Example of a computerized fluid dynamics (CFD) model
ISO Standards …….ISO/TR 16730-4:2013
Fire safety engineering -- Assessment, verification and validation of calculation methods -- Part 4: Example of a structural model
ISO/TR 16730-5:2013Fire safety engineering -- Assessment, verification and validation of calculation methods -- Part 5: Example of an Egress model
ISO Standards …….ISO 16732-1:2012
Fire safety engineering -- Fire risk assessment -- Part 1: General
ISO/TR 16732-2:2012Fire Safety Engineering -- Fire risk assessment -- Part 2: Example of an office building
ISO/TR 16732-3:2013Fire safety engineering -- Fire risk assessment -- Part 3: Example of an industrial property
ISO Standards …….ISO/NP 16733-1
Fire safety engineering -- Selection of design fire scenarios and design fires -- Part 1: General
ISO 16734:2006Fire safety engineering -- Requirements governing algebraic equations -- Fire plumes
ISO 16735:2006Fire safety engineering -- Requirements governing algebraic equations -- Smoke layers
ISO Standards …….ISO 16736:2006
Fire safety engineering -- Requirements governing algebraic equations -- Ceiling jet flows
16737:2012Fire safety engineering -- Requirements governing algebraic equations -- Vent flows
ISO/TR 16738:2009Fire-safety engineering -- Technical information on methods for evaluating behavior and movement of people
ISO Standards …….ISO 14520-1:2006Gaseous fire-extinguishing systems -- Physical
properties and system design -- Part 1: General requirements
ISO 7745:2010Hydraulic fluid power -- Fire-resistant (FR) fluids --
Requirements and guidelines for useISO 7010:2011Graphical symbols -- Safety colours and safety
signs -- Registered safety signs
ISO Standards …….ISO 3864-1:2011Graphical symbols -- Safety colours and safety
signs -- Part 1: Design principles for safety signs and safety markings
ISO 3864-3:2012Graphical symbols -- Safety colours and safety
signs -- Part 3: Design principles for graphical symbols for use in safety signs
ISO 3864-4:2011Graphical symbols -- Safety colours and safety
signs -- Part 4: Colorimetric and photometric properties of safety sign materials
Information taken from …….FPA-UKNFPA-USAISO
Thanks
Questions…..