Post on 01-Apr-2018
HTFS 3/ESpeaker stands
Designed to Entertain.™
User Guide
0166CSK - HK HTFS 3 E.indd 1 08/10/09 10:23:20
Note: HTFS 3/E stands are for use with HKTS 20, HKTS 30, HKTS 60 and HKTS 200
satellite speakers (not included)
Speaker stands
ASSembly InStructIonS
ASSembly
End of rail with cutout
Press adapter into rail
Bring wire out
Feed through
hole
Wire (included with speakers)
Oval-head screw
Flat-head screw
Included
Flat-head screws
Oval-head screws
Stand basesStand rails
Speaker adapters
Push UP on corners
Push base off speaker
HKTS 20 / HKTS 30 / HKTS 60 / HKTS 200 Speakers
1. Attach a stand rail to a stand base 2. Attach a speaker adapter to the stand rail
4. remove the speaker’s base3. run the speaker wire through the stand base
HTFS 3/E
0166CSK - HK HTFS 3 E.indd 2 08/10/09 10:23:25
+ –
A. Push cap down B. Insert bare wire C. Release cap
Slide speaker onto stand rail
Bring wire out through notch
Fit speaker rails onto grooves in stand rail
Features, specifications and appearance are subject to change without notice.
Harman Kardon is a trademark of Harman International Industries, Incorporated, registered in the United States and/or other countries. Designed to Entertain is a trademark of Harman International Industries, Incorporated.
©2009 Harman International Industries, Incorporated. All rights reserved.
HKTS 20 / HKTS 30 / HKTS 60 / HKTS 200 Speakers
5. connect the speaker wire to the speaker
6. Attach the speaker to the stand rail 7. bring the speaker wire out of the base
ENGLISH
0166CSK - HK HTFS 3 E.indd 3 08/10/09 10:23:26
Harman Consumer Group, Inc. 8500 Balboa Boulevard, Northridge, CA 91329 USA 516.255.4545 (USA only)
www.harmankardon.com
© 2009 Harman International Industries, Incorporated. All rights reserved. Tous droits réservés.
Part No. 444020-001, 444021-001
0166CSK - HK HTFS 3 E.indd 4 08/10/09 10:23:27