HTFS 3/ESpeaker stands

Designed to Entertain.™

User Guide

0166CSK - HK HTFS 3 E.indd 1 08/10/09 10:23:20

Note: HTFS 3/E stands are for use with HKTS 20, HKTS 30, HKTS 60 and HKTS 200

satellite speakers (not included)

Speaker stands

ASSembly InStructIonS

ASSembly

End of rail with cutout

Press adapter into rail

Bring wire out

Feed through

hole

Wire (included with speakers)

Oval-head screw

Flat-head screw

Included

Flat-head screws

Oval-head screws

Stand basesStand rails

Speaker adapters

Push UP on corners

Push base off speaker

HKTS 20 / HKTS 30 / HKTS 60 / HKTS 200 Speakers

1. Attach a stand rail to a stand base 2. Attach a speaker adapter to the stand rail

4. remove the speaker’s base3. run the speaker wire through the stand base

HTFS 3/E

0166CSK - HK HTFS 3 E.indd 2 08/10/09 10:23:25

+ –

A. Push cap down B. Insert bare wire C. Release cap

Slide speaker onto stand rail

Bring wire out through notch

Fit speaker rails onto grooves in stand rail

Features, specifications and appearance are subject to change without notice.

Harman Kardon is a trademark of Harman International Industries, Incorporated, registered in the United States and/or other countries. Designed to Entertain is a trademark of Harman International Industries, Incorporated.

©2009 Harman International Industries, Incorporated. All rights reserved.

HKTS 20 / HKTS 30 / HKTS 60 / HKTS 200 Speakers

5. connect the speaker wire to the speaker

6. Attach the speaker to the stand rail 7. bring the speaker wire out of the base

ENGLISH

0166CSK - HK HTFS 3 E.indd 3 08/10/09 10:23:26

Harman Consumer Group, Inc. 8500 Balboa Boulevard, Northridge, CA 91329 USA 516.255.4545 (USA only)

www.harmankardon.com

© 2009 Harman International Industries, Incorporated. All rights reserved. Tous droits réservés.

Part No. 444020-001, 444021-001

0166CSK - HK HTFS 3 E.indd 4 08/10/09 10:23:27