HOW TO USE SET-UP YOUR BLUMAGIX POWER BANK WITH

ROUTER

STEP 1

Turn on device, and set switch to “R”, for “Router”

STEP 2

From your device, search under available connections and connect to EDM-WIFI

STEP 3

Open browser and enter 192.168.169.1 as URL address; select “System Settings”

Select

Select “Work Mode” from the left panel.Set-up device for use as:

- Router OR- 3G Router -> where internet connection is available with the use of a

mobile broadband dongleHit “Apply”

STEP 4Ignore screen as shown below.

STEP 5

Enter 192.168.169.1 as URL address; select 3G icon

Select

STEP 6

Select Manual configuration and select the ISP being used (Singtel, M1, Starhub)

Select

STEP 7Your Internet Service Provider (ISP) should appear in the APN. If ISP is not listed, key in the correct APN and DialNum given by ISP; press “Apply”Please allow 15-30secs for the router to re-initialise for connection.

Edit

Select after editing

STEP 8When connected, the “System Status” page will reflect the IP address

IP Address will be shown if

connected