HOW TO USE SET-UP YOUR BLUMAGIX POWER BANK WITH ROUTER.
-
Upload
annis-wiggins -
Category
Documents
-
view
235 -
download
0
Transcript of HOW TO USE SET-UP YOUR BLUMAGIX POWER BANK WITH ROUTER.
HOW TO USE SET-UP YOUR BLUMAGIX POWER BANK WITH
ROUTER
STEP 1
Turn on device, and set switch to “R”, for “Router”
STEP 2
From your device, search under available connections and connect to EDM-WIFI
STEP 3
Open browser and enter 192.168.169.1 as URL address; select “System Settings”
Select
Select “Work Mode” from the left panel.Set-up device for use as:
- Router OR- 3G Router -> where internet connection is available with the use of a
mobile broadband dongleHit “Apply”
STEP 4Ignore screen as shown below.
STEP 5
Enter 192.168.169.1 as URL address; select 3G icon
Select
STEP 6
Select Manual configuration and select the ISP being used (Singtel, M1, Starhub)
Select
STEP 7Your Internet Service Provider (ISP) should appear in the APN. If ISP is not listed, key in the correct APN and DialNum given by ISP; press “Apply”Please allow 15-30secs for the router to re-initialise for connection.
Edit
Select after editing
STEP 8When connected, the “System Status” page will reflect the IP address
IP Address will be shown if
connected