How to Easily Obtain Blood for the MedRx Test with …...(increase blood flow) Step 1 Wipe Finger...

Post on 13-Jul-2020

1 views 0 download

Transcript of How to Easily Obtain Blood for the MedRx Test with …...(increase blood flow) Step 1 Wipe Finger...

How to Easily Obtain Blood for the MedRx Test with the Mitra Collector

Collection of drops of blood is easy and simple to do at home with a fingerstick

Prepare

• Wash Hands with soap and warm/hot water (as recommended by WHO)

or

• Rub Hands together for 20 seconds (increase blood flow)

Step 1

Wipe Finger

Step 2

• Typically select the 3rd Finger

• Rub Inside of finger with Sterile Alcohol Prep Pad for 15 seconds (not fingertip - less nerve endings, draws more blood)

• The side of the finger will be the target for the fingerstick

Prick Finger

Step 3

• Prick Inside of Finger in area prepared by Sterile Alcohol Pad (remove clear plastic cover, putting that end of the lancet against inside of finger)

• Push Firmly Top of Lancet (with steady pressure until you hear a click)

• Squeeze Finger (hold finger up to obtain a drop)

Wick Blood onto Tips

• Place Tip on Surface of Sample

• Wick Blood until tip is fully red (then count 2 seconds)

• Slowly and Smoothly remove sampler tip from blood

Step 4

Wick Blood onto Tips (con’t)

• Continue to Squeeze Finger

• Repeat the Process for the other Three Tips

Step 5

Close Cartridge

• Lift both sides of Cartridge Upwards to meet at the top and Press tabs together until a Click is heard

Step 6

Apply Gauze

Step 7

• Apply Gauze and Pressure on Finger for 5 minutes to stop any Bleeding

Apply Band-Aid

Step 8

• Apply Band-Aid on Finger at site of fingerstick

• Please dispose of Lancet & Gauze in nearby trash container (Lancet is safe to discard after use)

Complete Label

• Complete Label (peel and Place on Clamshell Device)• Patient Name• DOB• Date of Collection

Step 9

Please Print using a ball-point pen on the Label the following:

Prepare for Specimen Bag

• Place Clamshell Device in Silver Bag• (ventilated – blood will naturally dry)

• Place Gel Pack in Silver Bag

• Seal Silver Bag

Step 10

Specimen Biohazard Bag

• Place Silver Bag inside Biohazard Bag & Seal

Step 11

Ship to Lab

Step 12

• Place Specimen Biohazard Bag in Shipping Bag

• Place Shipping Label on front of Shipping Bag

• Drop Shipping Bag at a FedEx Pickup Location

• Obtain Tracking # from FedEx Pickup Location and email to Provider same day