Post on 29-Sep-2020
B U Y E R S G U I D E
I N D U S T R I A L S T R O F F E R S H I G H B AY S
HL-2130 11/06
Holophane has been the leader in lighting solutions for more than acentury. The hallmark of Holophane luminaires is the prismatic borosilicateglass reflector/refractor. The prisms provide a precise element of lightcontrol so as to illuminate any environment evenly without creating darkspots or glare.
Holophane luminaires are made for longevity and performance. In mostapplications, fewer luminaires can be used for an application than ifcompetitive fixtures are specified. Energy saving ballasts assure greater lightoutput from the lamp over a longer period of time, which translates intoreduced operating and maintenance costs.
Holophane has the resources, expertise and flexibility to meet all of yourlighting needs. We offer not only our standard product line but customluminaires for specialized applications.
HOLOPHANE MISSION STATEMENT:Provide lighting products and solutions,giving our customers the greatest value through superior:
• visibility
• energy efficiency
• reliability
• quality
• service
1
HOLOPHANE®
INTRO
DUCTIO
NC
ON
TENTS
INTRODUCTION2-7 Introduction2-3 All Fluorescents Are Not
Created Equal4-5 Product Matrix6-7 Fluorescent Lighting Products
HIGH BAYS
8-9 IntelliBay, IntelliVue10-11 ST Series12-13 HB/HC Series14-15 HAF Series16-17 HIF Series
PARABOLIC TROFFERS
18-19 HP Series
LENSED TROFFERS
20-21 HT Series22-23 T/B Series24-25 LS Series
WRAPS
26-27 HW Series28-29 WA Series30-31 WR Series
INDUSTRIALS
32-33 HSN/HSM Series34-35 HIS Series36-37 IC Series38-39 TN Series40-41 CC Series42-43 IW Series44-45 IT Series
STRIPS
46-47 HSN/HSM Series48-49 HIS Series50-51 TN Series
SPECIALTY
52-53 Controlume54-55 DD Series56-57 EM/EN Series58-59 HES Series60-61 TA Series62-63 7200 Prismatite Series64-65 HEF Series
ORDERING GUIDE66 Photometry Distributions66 Tandem Configurations67 Lamp Types and Sizes67 Lamp Configurations67 Diffuser Options
OPTIONS AND ACCESSORIES
68-69 High Bays, Troffers70-71 Wraps72-73 Industrials74-75 Strips, Specialty76-77 Cord Set Options78-79 Motion Sensor Options80 Steel Cable Hangers
TERMS AND CONDITIONS81 Terms and Conditions
Contents:
| INDOOR | FLUORESCENT | Introduction www.holophane.com2
Holophane optically engineered fluorescent lighting products.
Throughout the industry, there are common elements to all fluorescent
luminaire designs. But a fluorescent luminaire by any other name will not
perform as well as a “Holophane” luminaire. Superior engineering of
those commonly designed elements separates Optically-Engineered
Fluorescents by Holophane from all other manufacturers.
• High performance optics
• Manufacturing flexibility
• Expert consultation
• Quality solutions
• Superior engineering
• Excellent finishes
All Fluorescents Are Not Created EqualThere is a difference between Optically Engineered Fluorescentluminaires by Holophane and other brands of fluorescent products;a difference that gets the most out of each element of the fluores-cent design; a difference that makes us proud to include thesefixtures in our family of products. Holophane, a leader in lightingsolutions, is an R&D based company whose hallmarks are theknowledge of and the ability to control light. Optically EngineeredFluorescents by Holophane carry with them our reputation forexcellence. And, just as the industry has come to trust theengineering behind thousands of other products from high baysand low bays to outdoor area lights, you can trust that OpticallyEngineered Fluorescents by Holophane are members of theHolophane family by virtue of their superior optics.
TYPICAL APPLICATIONS:
Warehouses
Food Processing
Office Buildings
Manufacturing
Assembly Areas
Storage Areas
Retail
Colleges & Universities
Hospitals
Fluorescent
3
HOLOPHANE®
INTRO
DUCTIO
N
Optically Engineered Miro®
The Miro reflective material we use in our products is recognizedthroughout the industry for its excellent reflective properties. In truth,you may find other companies boasting of Miro in their literature.They, however, cannot boast of Holophane’s expertise in opticalengineering. Our engineers take the same Miro material, applyHolophane optical solutions and measurably increase the luminaire’sphotometric performance. Same reflective material, better use of it.
Holophane LensesHolophane lenses have been carefully engineered around either thepatented McPhail prism or Refractive Grid® optical train to correct theinherent flaws in uncontrolled light; namely random distribution, highlamp and reflector brightness and direct and reflected glare.
Holophane’s McPhail prism is injection molded to the only angle thatredirects light back into the fixture for another chance to get out asuseful light. It also spreads the light evenly to minimize reflected glare.Holophane lenses made with McPhail conical prisms direct more lightto the 0-60 degree zone while substantially reducing direct glare.
Holophane’s Refractive Grid lenses, utilizing a refracting hemisphericalprism and technology similar to the light piping of fiber optics, providean ideal balance of vertical and horizontal illumination while yieldinghigher maintained illumination and less dirt depreciation than louveredfixtures.
It is the combination and appropriate application of how we use Miroand the unsurpassed efficiency and effectiveness of our lenses thatmakes Optically Engineered Fluorescents by Holophane a better choicefor our fluorescent solutions.
Benefits CompoundedFrom the beginning of the design process, Holophane considers everyaspect of how a product will perform: total light output, luminaireefficiency, energy efficiency, ease of installation, aesthetic quality, andoverall value to the customer. In most cases, because of opticalengineering, fewer Holophane luminaires are needed to get superiorresults. From very narrow (.4) to very wide (2.8) spacing criteria insymmetric and asymmetric distributions, 90% or better efficiencies aretypical. That level of performance saves up-front installation costs andenergy costs throughout the system’s life.
Holophane has been the leader in lighting solutions for more than acentury. We have the resources, expertise and flexibility to meet yourlighting needs. We’re dedicated to being your total quality provider ofoptically engineered lighting solutions. Our factory-direct sales forcestands ready to work with you to develop a solution to meet yourspecific lighting requirements.
FluorescentHigh Bays Parabolic Troffers Lensed Troffers Wraps Industrials Strips Specialty
Miro® and Miro-Silver® are registered trademarks of Alanod
CONTROLUME DD SERIES EM/EN SERIES
INTELLIBAYTM INTELLIVUETM ST SERIES
4
Fluorescent
HT – 2X2
HISTORICAL ACRYLIC ORNAMENTAL
HP SERIES HT SERIES T/B SERIES
HW SERIES WA SERIES WR SERIES HSN/HSM SERIES
HIGH BAY
WRAPS INDUSTRIALS
T – 1X4 B – 2X2
DDCTL EN EM
| INDOOR | FLUORESCENT | Product Selection Matrix www.holophane.com
HP – 2X2
HWSN
HWSM
HWSW
WA
WRSN
WRSM
HSN
HSM
HP – 2X4
IV – 3 lamp IV – 6 lamp STIA – 3 lamp IA – 6 lamp
PARABOLIC TROFFERS LENSED TROFFERS
HT – 2X4
SPECIALTY
HES SERIES TA SERIES 7200 PRISMATITE SERIES HEF SERIES
HB/HC SERIES HAF SERIES HIF SERIES
5
Product Selection MatrixHOLOPHANE®
FLU
ORESCEN
TP
RODUCT
SELECTIO
NM
ATRIX
TN
SPHERES
LS SERIES HSN/HSM SERIES HIS SERIES TN SERIES
HIS SERIES IC SERIES TN SERIES CC SERIES IW SERIES IT SERIES
LS – 2X2 LS – 2X4 HSM HIS
HSN
HES HEFTA 7200
HIS IC TN CC IW IT
HB HIFHC HAF
STRIPS
| INDOOR | FLUORESCENT | Introduction www.holophane.com6
FLUORESCENT
High BaysHolophane’s family of premium and commercial grade fluorescenthigh bay luminaires come in a choice of sizes, mountingconfigurations and beam patterns to customize the light output tomeet the diverse needs of warehouse and industrial applications.
With multiple lamp sources and precision-engineered specularreflectors, not only is high-angle glare reduced that is typically seenin traditional high bay and low bay luminaires, but fluorescent highbay solutions offer increased comfort and energy efficiency.
Parabolic andLensed TroffersHolophane parabolic troffers deliver enhanced visual comfort andimprove efficiency over conventional louvered fixtures by combininga precisely contoured specular reflector with a parabolic louveryielding highly efficient lighting for low glare applications.
Holophane’s family of parabolic troffers offers premium gradeluminaires with 3” louvers in a choice of sizes, ceiling types, lampconfigurations, door frames, cell quantity, air handling and beampatterns to customize the light output to meet the diverse needs ofoffice, commercial, school, hospital, and retail areas.
Holophane lensed troffers achieve maximum efficiency and superiorglare control by combining a precisely optimized specular reflectorwith our patented lens technology.
The Holophane family of lensed troffers offers premium grade,surface mount luminaires in choice of sizes, ceiling trims, doorframes, air handling, lamp configurations, lenses and beam patterns.
WrapsA choice of proven Holophane wraps provide a clean, linearappearance of light with control, comfort and architecturalrichness. The highly engineered optical system provides amplevertical illumination with exceptional uniformity.
This family offers premium or commercial grade wraparoundluminaires with narrow, medium or wide channels in a choice ofstyles, sizes, mounting, lamp configurations and beam patterns tocustomize the light output.
• Highly efficient
• Improved visual acuity
• Cuts energy while brightening environment
• Exceptional vertical and horizontal illumination
• Minimal direct and reflected glare
• Easy wiring and maintenance
• Superior performance
7
HOLOPHANE®
FLU
ORESCEN
TIN
TRODUCTIO
N
HOLOPHANE®IndustrialsHolophane offers a variety of industrial luminaires for a wide rangeof applications from the most demanding specialized industrialapplications to the most simple task and area lighting.
This family of luminaires comes in a choice of styles, sizes,mounting, lamp configurations and beam patterns to customizethe light output to meet the diverse needs of offices, warehouses,schools, hospitals and industrial areas.
StripsHolophane strips are ideal for general area or task illuminationrequiring superior performance in moderate environments.
This family of strip luminaires comes in a choice of narrow,medium or wide channels in a variety of sizes, mounting, and lampconfigurations.
SpecialtyHolophane’s specialty fluorescent luminaires are suitable for niche applicationssuch as conference room boards, automotive and paint inspection booths,video conferencing, food processing areas, cold-storage facilities, chemicalplants, pulp and paper facilities, laboratories or parking garages.
Each Holophane specialty luminaire is designed for its specific applicationwith the following parameters in mind: technical innovation, efficiency,comfort, aesthetics and durability. When inspection visibility, weathering,dust, high temperature, ruggedness, humidity, or fumes are primaryfactors in determining the selection of your luminaire, a Holophanespecialty fixture should be considered.
For more applications requiring specialized luminaires, Holophane will consideroptically-engineering a fixture for you. Please contact your Holophane factoryrepresentative for your project consultation.
8
HIGH BAYS
IntelliBay®, IntelliVue®
IA | IV
P.O.L.A.R. technology is a patented method developed by Holophane to maximize the lumenoutput of T5 or T5HO lamps in luminaires where temperature may be a concern. P.O.L.A.R.stands for Passively Optimized Lumen output with Automated Regulation. It uses noenergy, is environmentally safe and maintenance free, and self regulates its ability todissipate the lamp’s heat based on changing ambient temperatures.
FEATURES:• Vertically stacked lamps provide smaller foot print• Isolated ballast chamber for extended ballast life• Utilizes innovative Miro-Silver® optics for 98% total reflectivity• Copper free die cast end caps for corrosion resistance and structural integrity• UL listed 55ºC for damp locations• Variety of mounting options
Example: IV 2 28 12 A W WY P
How to Construct a Catalog Number:
| INDOOR | FLUORESCENT | High Bays | IntelliBay & IntelliVue www.holophane.com
Maximum Weight: 26.4 kg. (12 lbs.)
Maximum Weight: 46.2 kg. (21 lbs.)
IA1 IntelliBay IV2 IntelliVue1 Open end, stamped
sheet metal end cap2 Closed end, die-cast
end cap
28 28 Watt, T5 lamp541 54 Watt, T5HO lamp1 High output
IV1
LUMINAIRE
22
LAMP QUANTITY & LENGTH
283
LAMP TYPE & BALLAST
H GraphiteK BlackL Satin nickelW WhiteZ BronzeA1 As specified1 Available through
TSG only
W6
FINISH
IA | IntelliBay - 2, 3 lamp
IV | IntelliVue – 2, 3 lamp
7.93”
7.85”
9.24”
7.78”
2 2 Lamp, 8”x 4’ nominal3 3 Lamp, 8”x 4’ nominal4 4 Lamp, 16”x 4’ nominal6 6 Lamp, 16”x 4’ nominal
A AisleB Aisle with uplightM MediumG Medium with uplightW WideE Wide with uplight
124
VOLTAGE
A5
OPTICAL DISTRIBUTION
12 120V, C/UL/US20 208V, UL24 240V UL27 277V, C/UL/US34 347V, C/UL/US48 480V, UL
Maximum Weight: 66 kg. (30 lbs.)
Maximum Weight: 105.6 kg. (48 lbs.)
IA | IntelliBay – 4, 6 lamp
IV | IntelliVue – 4, 6 lamp
15.88”
7.85”
8.70”
19.38”
7.78”
Drawings, dimensions and specificationssubject to change.
IntelliBay
IntelliBay - 6 lamp
IntelliVue - 6 lamp
IntelliVue
9
HOLOPHANE®
D1 Electronic dimmingF FusingG Fusing (double)C2 Dual circuit wiringL Emergency ballast LP550,
compatible with electronic ordimming AC ballasts
M Emergency ballast LP600,specification grade, compatiblewith electronic or dimming ACballasts
H Pre-wired flex, Holoflex® IIS Occupancy sensor on unitP P.O.L.A.R.TechnologyMolded cord and plugRX3 120V, straight bladeTX3 120V, twist-offUX3 208/240V, twist-offVX4 277V, twist-offWX4 347V, twist-offYX4 480V, twist-offCord onlyZX1 WhiteK1,2 White, curly1 Not available with dual circuit2 Not available with dimming 3 X = 3’, 6’ or 10’4 Not available with WY mounting
F8
ELECTRICAL
FLUORESCENT
HIGH BAYS
P.O.L.A.R. TECHNOLOGY
IntelliBay®
IntelliVue®
P.O.L.A.R. Technology:Passively Optimized Lumen output with Automated Regulation
A revolutionary passive thermal management system that maintains the cold spot temperature on T-5 lamps over a wide range of roomambient temperatures.
• Increased energy savings
• Maximum and constant lumen output
• Obtain designed illumination levels
• Controlled lamp operating range
WY7
MOUNTING
N1 No mounting selectedA2 18” Single stem with canopy
assembly for pendant mountingB2 24” Single stem, canopy
assembly for pendant mountingC2 36” Single stem, canopy assembly
for pendant mountingH4 18” Single stem, hook assemblyJ4 24” Single stem, hook assemblyK4 36” Single stem, hook assemblyL4 18” Single stem, loop assemblyM4 24” Single stem, loop assemblyP4 36” Single stem, loop assembly
for pendant mountingR3 (2) 48” Industrial cable assembliesT5 (2) 48” Decorative cable
assemblies with canopyY Y-hanger (set of 2)Z Y-hanger with 48” chain assemblyE3 Safety hook assembly, 3/4” maleF3 Antirotation hook assembly, 3/4”maleG3 Loop assembly, 3/4” maleWY6 Wall mount assembly1 Single stem mount provided by customer
must use FPENMOUNT accessory2 Not available with RX, TX, UX, VX, WX, YX
cord and plug options or K, ZX cord optionsX=finish from Step 6
3 Not available with K, curly cord option,4 Not available with K, curly option,
X=finish from Step 65 Not available with RX, TX, UX, VX, WX, YX
cord and plug options 6 IntelliVue 2-3 lamp only, Y = finish
10 Accessories (Ships separately)FC-L5-15-X1 Molded curly cord and plug, 120V, twist-offFC-L6-15-X1 Molded curly cord and plug, 208/240V, twist-offFC-L7-15-X1 Molded curly cord and plug, 277V, twist-offFC-L24-20-X1 Curly cord with attached 347V, twist-off plugFC-L8-20-X1 Curly cord with attached 480V, twist-off plugDSC Safety cable on lens assemblyFPENMOUNT Pendant mounting plate accessory kit1 X = 14 for 2 and 3 lamp or 28 for 4 and 6 lamp
See below
IVPOL9
OPTIONS
See below
FC-L5-15-X10
ACCESSORIES
9 Options (Factory installed)“IV” Series onlyIVPOL Polycarbonate, .125” clear lens assemblyIVA12 Acrylic, .110” pattern 12 prismatic lens assemblyIVH55 Acrylic, .140” Holophane pattern 6255 prismatic lens assemblyIVH24 Acrylic, .240” Holophane Refractive Grid® 8224 lens assemblyIVH46 Acrylic, .280” Holophane Refractive Grid 8246 with bonded diffuse interface lens assemblyIVH48 Acrylic, .280” Holophane Refractive Grid 8248 with high efficiency bonded diffuse interface lens assemblyIVB1X1 Baffle assembly, 60º cutoffIVWGBX1 Wire guard assembly for bottom impact protection for use with lens assemblyIVGBNX1 Wire guard for bottom impact protection for use without lens assemblyIVWGRX1 Wire guard assembly for side impact protection1 X = finish
10
HIGH BAYS
ST Series – Premium Grade
ST
The ST series is a highly efficient and versatile line of high-intensity fluorescent high bayluminaires. Using T5HO lamps, ideal applications include general lighting for industrialenvironments, multipurpose lighting for warehouse and retail environments, and generallighting for open assembly and manufacturing areas.
FEATURES:• Miro® 4 enhanced specular aluminum reflector with 95% reflectivity• Diagonal cross bracing and centralized ballast support for maximum rigidity• Easy wiring/service are provided by top-mounted quick access wiring plate• Chain or cable mounted
Example: ST T 24 X T NNN K46 MK3 U
How to Construct a Catalog Number:
| INDOOR | FLUORESCENT | High Bays | ST Series – Premium Grade www.holophane.com
ST ST Series 22 2’ x 2’ Nominal23 2’ x 3’ Nominal24 2’ x 4’ Nominal
ST1
LUMINAIRE
T2
HOUSING
243
HOUSING SIZE
ST | Premium Grade
G 20 Gauge galvanizedT 20 Gauge white steel
B BroadN NormalS SpreadT Task
X4
REFLECTOR MATERIAL
T5
DISTRIBUTION
X Premium Miro 4specular aluminum
NNN6
DIFFUSER
CAC1 Clear acrylic lensH241 .240” acrylic Refractive
Grid® #8224 lensH551 .140” acrylic cone prism
#6255 lensNNN No lensPOL1 Clear polycarbonateWGA1 Grill with clear acrylic
lensWGD Wire guardWGN Grill only1 Rated for 25ºC max. ambient
Drawings, dimensions and specificationssubject to change.
11
HOLOPHANE®
K44 (4) T5HOK46 (6) T5HO
K467
LAMP TYPE & CONFIG.Standard light output, for T5HO lampsMKD1 (2) Programmed start for (4) lampsMK2 (2) Programmed start for (4) lampsMK3 (3) Programmed start for (6) lamps1 120-277V
MK38
BALLAST TYPE AND QUANTITY
U 120-277VH1 347-480V1 T5 only
U9
VOLTAGE
FLUORESCENT
HIGH BAYS
MIRO® 4
ST Series
See page 68
CP1S10
OPTIONS
See page 69
STTBRACKETSET11
ACCESSORIES
12
HIGH BAYS
HB/HC SeriesCommercial GradeHB | HC
The HB/HC Series is an ideal energy-saving alternative to HID high bay luminaires in retailbig-box, gymnasium, warehouse, and light industrial spaces. In 1-for-1 replacements ofstandard metal halide light sources, these luminaires can improve maintained horizontal andvertical illumination while reducing wattage by up to 50%. Taking advantage of fluorescentprogram start capability, greater energy savings are possible in many facilities by controllingthe fixtures with occupancy sensors and photo-sensors.
FEATURES:• High efficiency for 4-lamp and 6 lamp• Long lamp life• High color rendering• Instant-start and flicker-free operation• Venting slots improve thermal performance• Occupancy sensors in various types available
Example: HB S 4 X T NNN S K46 MK3 U
How to Construct a Catalog Number:
| INDOOR | FLUORESCENT | High Bays | HB/HC Series – Commercial Grade www.holophane.com
HB HB SeriesHC HC Series
4 4’ Nominal
HB1
LUMINAIRE
S2
HOUSING
43
HOUSING SIZE
S No uplightU1 Uplight slots1 Can only be used
with X reflector
S7
UPLIGHT
HB | Commercial Grade
S 22 GaugeT 20 Gauge
B BroadF FocusN NormalS SpreadT Task
X4
REFLECTOR MATERIAL
T5
DISTRIBUTION
C Miro 4 (.012”)D White painted steelX Miro 4 (.020”)
NNN6
DIFFUSER
B12 Acrylic, .125” lensCAC1 Clear acrylic lensH241 .240” Acrylic Refractive
Grid® #8224 lensH461 .280” acrylic bonded
diffuse interface #8246lens
H551 .140” acrylic cone prism #6255 lens
NNN No lensPOL1 Clear polycarbonateWGA1 Wire guard with clear
acrylic lensWGD Wire guard1 Rated for 25ºC max. ambient
23.66”
4.68”
HC | Commercial Grade
16.072”
4.47”
Drawings, dimensions and specificationssubject to change.
13
HOLOPHANE®
HBK46 (6) T5HOO46 (6) F32 T8K44 (4) T5HOO44 (4) F32 T8HCK44 (4) T5HOO44 (4) F32 T8
K468
LAMP TYPE & CONFIG.
MK39
BALLAST TYPE AND QUANTITY
U 120-277V31 347VH2 347-480V1 T8 only2 T5 only
U10
VOLTAGE
FLUORESCENT
HIGH BAYS
MIRO® 4
HB/HC Series
HB
HC
See page 68
CP1S11
OPTIONS
See page 69
HSD12
ACCESSORIES
HBHigh light output, for (6) T5HO lampsMK3 (3) Programmed startStandard light output, for (6) T8 lampsEP2 (2) Instant start EP3 (3) Instant startEPD1 (2) Instant startPS2 (2) Programmed startPS3 (3) Programmed startPSD1 (2) Programmed startHigh light output, for (6) T8 lampsYP2 (2) Instant startYP3 (3) Instant startHCStandard light output, for (4) T5HO lampsMK2 (2) Programmed startMKD (2) Programmed startStandard light output, for (4) T8 lampsEP1 (1) Instant startEP2 (2) Instant startEPD1 (2) Instant startPS1 (1) Programmed startPS2 (2) Programmed startPSD1 (2) Programmed startHigh light output, for (4) T8 lampsYP2 (2) Instant startYPD1 (2) Instant start1 For lamps with inboard/outboard switching
14
HIGH BAYS
HAF Series – Aisle
HAF
The HAF Series was especially designed for tall warehouse aisles in distribution centers andother high rack storage areas, where the emphasis is on illuminating labels on stored goods.It is suitable for mounting heights of 50 feet plus in narrow aisles.
FEATURES:• Extremely high fixture efficiency• Solid lightweight construction• Top-access ballasts easily serviced• Up to 16’ length requires only two supports spaced as little as 8’ apart• Sections utilize plug-together wiring for fast, easy power connections• Easily accommodates required clearances around standard fire sprinklers • Miro® 4 enhanced specular aluminum reflector with 95% reflectivity
Example: HAF S 4 X F TTN K41 MK1 U
How to Construct a Catalog Number:
| INDOOR | FLUORESCENT | High Bays | HAF Series – Aisle www.holophane.com
HAF HAF Series 08 8’ Nominal121 12’ Nominal162 16’ Nominal1 (1) 4’ and (1) 8’
section2 (2) 8’ sections
HAF1
LUMINAIRE
T2
HOUSING
083
HOUSING SIZE
HAF | Aisle
T 20 Gauge F Focus
X4
REFLECTOR MATERIAL
F5
DISTRIBUTION
X Miro 4 .020”Y Miro 4 .032”
TTN6
DIRECTION
TTN 0º Asymmetric
3.20”
7.20”
Drawings, dimensions and specificationssubject to change.
15
HOLOPHANE®
K41 (2) F54 T5HO O41 (2) F32 T8
K418
LAMP TYPE & CONFIG.
MK19
BALLAST TYPE AND QUANTITY
U 120-277V31 347VH2 347-480V1 T8 only2 T5 only
U10
VOLTAGE
FLUORESCENT
HIGH BAYS
MIRO® 4
HAF Series
See page 68
CP1S11
OPTIONS
See page 69
MHHC12
ACCESSORIES
Standard light output, for T8 lampsEP1 (1) Instant start for (2), (3) or (4) lampsEP2 (2) Instant start for (2) or (4) lamps PS1 (1) Programmed start for (2), (3) or (4) lampsPS2 (2) Programmed start for (4) lampsHigh light output, for T8 lampsYP1 (1) Instant start for (2), (3) or (4) lampsYP2 (2) Instant start for (4) lampsStandard light output, for T5HO lampsMK1 (1) Programmed start for (1) or (2) lampsMK2 (2) Programmed start for (3) or (4) lamps
16
HIGH BAYS
HIF Series – Tall Aisle
HIF
The HIF Series was especially designed for tall warehouse aisles in distribution centers andother high rack storage areas, where the emphasis is on illuminating labels on stored goods.
FEATURES:• Extremely high fixture efficiency• Provides uniform illumination, improving visibility and minimizing errors• Solid lightweight construction• Top-access ballasts easily serviced• Open center allows cooler ballast operation for longer ballast life• Easy installation• Miro® 4 enhanced specular aluminum reflector with 95% reflectivity
Example: HIF S 04 X F 06 S K42 MK1 U
How to Construct a Catalog Number:
| INDOOR | FLUORESCENT | High Bays | HIF Series – Tall Aisle www.holophane.com
HIF HIF Series 04 4’ Nominal
HIF1
LUMINAIRE
S2
HOUSING
043
HOUSING SIZE
S No uplightU Uplight slots
S7
UPLIGHT
HIF | Tall Aisle
S 22 GaugeT 20 Gauge
F Focus
X4
REFLECTOR MATERIAL
F5
DISTRIBUTION
X Miro 4 .020”Y Miro 4 .032”
066
DIRECTION
F06 6º AsymmetricTT 0º Asymmetric
4.50”
16.00”
Drawings, dimensions and specificationssubject to change.
17
HOLOPHANE®
K42 (2) T5HOK45 (4) T5HO O42 (2) F32 T8O45 (4) F32 T8
K428
LAMP TYPE & CONFIG.
MK19
BALLAST TYPE AND QUANTITY
U 120-277V31 347VH2 347-480V1 T8 only2 T5 only
U10
VOLTAGE
FLUORESCENT
HIGH BAYS
MIRO® 4
HIF Series
See page 68
CP1S11
OPTIONS
See page 69
HSD12
ACCESSORIES
Standard light output, for T8 lampsEP1 (1) Instant start for (2) or (4) lampsEP2 (2) Instant start for (2) or (4) lamps PS1 (1) Programmed start for (2) or (4) lampsPS2 (2) Programmed start for (4) lampsHigh light output, for T8 lampsYP1 (1) Instant start for (2) lampsYP2 (2) Instant start for (4) lampsStandard light output, for T5HO lampsMK1 (1) Programmed start for (2) lampsMK2 (2) Programmed start for (2) or (4) lamps
18
PARABOLIC TROFFERS
HP Series – 2x2, 2x4
HP
Holophane’s low iridescent parabolic reflectors feature cell patterns that produce a very lowbrightness, to make an aesthetically pleasing luminaire. They are ideal for glare andbrightness control in applications requiring low to high light levels with increased visualcomfort. It is commonly used in offices, classrooms, and auditoriums.
FEATURES:• Available with static and air-handling options• Deep cell, premium-grade aluminum louvers in choice of low-iridescent diffuse
or specular louver finishes• Black reveal provides floating louver appearance• Integral T-bar safety clips are standard
Example: HP G A 22 W N D23 O22 EP1 U
How to Construct a Catalog Number:
| INDOOR | FLUORESCENT | Parabolic Troffers | HP Series – 2X2, 2X4 www.holophane.com
HP HP Series G Grid
HP1
LUMINAIRE
G2
MOUNTING
HP | 2 X 2
22 2’ x 2’ Nominal24 2’ x 4’ Nominal
A3
HOUSING
224
HOUSING SIZE
A1 Air handlingN Static1 Not suitable for
NYC applications
N6
DISTRIBUTION
N NormalS Spread
23.8”
20.8”
5.2”
2.8”
HP | 2 x 4
23.8”20.8”
4.5”2.8”
D237
DIFFUSER
2 x 2D231 6 Cell louverD331 9 Cell louver2 x 4D261 12 Cell louverD361 18 Cell louverD481 32 Cell louver1 Semi-specular-specular
available upon request
W5
REFLECTOR MATERIAL
W1 White painted steelX2 Miro® enhanced
aluminum1 Normal distribution only2 Spread distribution only
A
N
Drawings, dimensions and specificationssubject to change.
19
HOLOPHANE®
2 x 2O22 (2) F17 T8O23 (3) F17 T8O24 (4) F17 T82 x 4O42 (2) F32 T8O43 (3) F32 T8O44 (4) F32 T8
O228
LAMP TYPE &CONFIGURATION
EP19
BALLAST TYPE
U 120-277V31 347V
U10
VOLTAGE
FLUORESCENT
PARABOLIC TROFFERS
MIRO® 4
HP Series
2 x 2
2 x 4
See page 68
GLR11
OPTIONS
See page 69
B6012
ACCESSORIES
Standard light output, for T8 lampsEP1 (1) Instant start for (2) or (4) lampsEP2 (2) Instant start for (2) or (4) lamps EPD1 (2) Instant start for (3) or (4) lampsPS1 (1) Programmed start for (2), (3) or (4)
lampsPS2 (2) Programmed start for (2) or (4) lampsHigh light output, for T8 lampsYP1 (1) Instant start for (1), (2), (3) or (4)
lampsYP2 (2) Instant start for (2) or (4) lamps1 For lamps with inboard/outboard switching
20
LENSED TROFFERS
HT Series – 2x2, 2x4
HT
The HT Series, available in 2x2 and 2x4 sizes, is a commercial grade, 4” deep, recessedlensed troffer. Uniform light distribution over the entire diffuser is achieved through optimalreflector design.
FEATURES:• Metal housing components are post-painted with polyester powder coat• Urethane foam gasket eliminates light leaks between frame and housing• Optional earthquake clips available• Miro® 4 enhanced specular aluminum reflector with 95% reflectivity
Example: HT G A 22 W N A12 O22 EP1 U
How to Construct a Catalog Number:
| INDOOR | FLUORESCENT | Lensed Troffers | HT Series – 2X2, 2X4 www.holophane.com
HT HT Series G Grid
HT1
LUMINAIRE
G2
MOUNTING
HT | 2 X 2
22 2’ x 2’ Nominal24 2’ x 4’ Nominal
A3
HOUSING/DOOR
224
HOUSING SIZE
N6
DISTRIBUTION
N NormalS Spread
HT | 2 x 4
A127
DIFFUSER
A121 Acrylic .110” lens B121 Acrylic .125” lensCAC2 Clear acrylic lens H243 Acrylic .240 #8224 H461 Acrylic #8246H483,4 Acrylic #8248H551 Acrylic #6255POL1 Polycarbonate .125”1 Normal distribution only2 Rated for 25ºC max. ambient3 Spread distribution only4 O22, O23, O42 and O43
lamp only
W5
REFLECTOR MATERIAL
W White painted steelX Premium Miro® 4
specular aluminum
S
S Static flush steel
Drawings, dimensions and specificationssubject to change.
21
HOLOPHANE®
O22 (2) F17 T8O23 (3) F17 T8O24 (4) F17 T8O42 (2) F32 T8O43 (3) F32 T8O44 (4) F32 T8
O228
LAMP TYPE &CONFIGURATION
EP19
BALLAST TYPE AND QUANTITY
U 120-277V3 347V
U10
VOLTAGE
FLUORESCENT
LENSED TROFFERS
MIRO® 4
HT Series
2 x 2
2 x 4
See page 68
GLR11
OPTIONS
See page 69
B6012
ACCESSORIES
Standard light output, for T8 lampsEP1 (1) Instant start for (2), (3) or (4) lampsEP2 (2) Instant start for (2) or (4) lamps EPD1 (2) Instant start for (3) or (4) lampsPS1 (1) Programmed start for (2), (3) or
(4) lampsPS2 (2) Programmed start for (2) or (4)
lampsHigh light output, for T8 lampsYP1 (1) Instant start for (2), (3) or (4) lampsYP2 (2) Instant start for (2) or (4) lamps1 For lamps with inboard/outboard switching
22
RECESSED LENSED TROFFERS
T/B Series – 1x4, 2x2
T | B
The T Series, available in a 1x4 size, is a premium grade, 5.25” deep, recessed lensed troffer.
The B Series, available in a 2x2 size, is a premium grade, 6” deep, recessed lensed trofferwith biax lamps.
FEATURES:• Available with static and air-handling options• Regressed aluminum door or flush steel door• Easy wiring and maintenance• Miro® 4 enhanced specular aluminum reflector with 95% reflectivity
Example: T G S 14 X N A12 O42 EP1 U
How to Construct a Catalog Number:
| INDOOR | FLUORESCENT | Recessed Lensed Troffers | T/B Series – 1X4, 2X2 www.holophane.com
T T SeriesB B Series
G GridF1 Flange1 T Series only
T1
LUMINAIRE
G2
MOUNTING
T | 1 X 4
T14 1’ x 4’ NominalB22 2’ x 2’ Nominal
S3
HOUSING/DOOR
144
HOUSING SIZE
N6
DISTRIBUTION
N NormalS SpreadT Task
B | 2 x 2
X5
REFLECTOR MATERIAL
D White painted steelX Premium Miro® 4
specular aluminum
A
N
R
S
A1 Regressed aluminumN2 Regressed aluminumR Regressed aluminumS Flat steel1 Air handling2 Black reveal
A127
DIFFUSER
A121 Acrylic .110” lens B121 Acrylic .125” lensCAC2 Clear acrylic lens H243 Acrylic .240 #8224 H461 Acrylic #8246H483 Acrylic #8248H551 Acrylic #6255P55 6255 Prismatic
polycarbonatePOL1 Polycarbonate .125”1 Normal distribution only2 Rated for 25ºC max. ambient3 Spread distribution only
Drawings, dimensions and specificationssubject to change.
23
HOLOPHANE®
FLUORESCENT
RECESSED LENSEDTROFFERS
MIRO® 4
T/B Series
1 x 4
2 x 2
TO40 (1) F32 T8O42 (2) F32 T8O43 (3) F32 T8BB42 (2) TT5B43 (3) TT5B44 (4) TT5B45 (5) TT5B46 (6) TT51 40W twin-tube
biaxial lamp
O428
LAMP TYPE &CONFIGURATION
EP19
BALLAST TYPE AND QUANTITY
U1 120-277V3 347V1 T Series only
U10
VOLTAGE
See page 68
GLR11
OPTIONS
See page 69
B6012
ACCESSORIES
TStandard light output, for T8 lampsEP1 (1) Instant start for (1), (2) or (3) lampsEP2 (2) Instant start for (2) lamps EPD1 (2) Instant start for (3) lampsPS1 (1) Programmed start for (1), (2) or
(3) lampsPS2 (2) Programmed start for (2) lampsPSD1 (2) Programmed start for (3) lampsHigh light output, for T8 lampsYP1 (1) Instant start for (1), (2) or (3) lampsYPD1 (2) Instant start for (3) lampsBMedium light output, for FT40 biaxial lampsMP1 (1) Instant start for (2) or (3) lampsMP2 (2) Instant start for (4), (5) or (6) lampsMP3 (3) Instant start for (6) lamps1 For lamps with inboard/outboard switching
24
SURFACE LENSED TROFFERS
LS Series – 2x2, 2x4
LS
The LS Series of surface mount luminaires is designed to provide high efficiency generallighting for virtually any type of interior, such as offices, classrooms, hospitals and retailareas.
FEATURES:• Available with a wide variety of lens and reflector options• Metal housing is post-painted with polyester powder coat• Easy wiring and maintenance• Miro® 4 enhanced specular aluminum reflector with 95% reflectivity
Example: LS Q 22 X N A12 O22 EP1 U
How to Construct a Catalog Number:
| INDOOR | FLUORESCENT | Surface Lensed Troffers | LS Series – 2X2, 2X4 www.holophane.com
LS LS Series Q Regressedaluminum
T Flat steel
LS1
LUMINAIRE
Q2
DOOR
LS | 2 X 2
N5
DISTRIBUTION
N NormalS SpreadT Task
LS | 2 x 4
X4
REFLECTOR MATERIAL
D White painted metalX Premium Miro® 4
enhanced aluminum
A126
DIFFUSER
A121 Acrylic .110” lens B121 Acrylic .125” lensCAC2 Clear acrylic lens H243 Acrylic .240 #8224 H461 Acrylic #8246H483 Acrylic #8248H551 Acrylic #6255POL1 Polycarbonate .125” lens1 Normal distribution only2 Rated for 25ºC max. ambient3 Spread distribution only
22 2’ x 2’ Nominal24 2’ x 4’ Nominal
223
HOUSING SIZE
Drawings, dimensions and specificationssubject to change.
25
HOLOPHANE®
FLUORESCENT
SURFACE LENSEDTROFFERS
MIRO® 4
LS Series
2 x 2
2 x 4
O22 (2) F17 T8O23 (3) F17 T8O24 (4) F17 T8O42 (2) F32 T8O43 (3) F32 T8O44 (4) F32 T8
O227
LAMP TYPE &CONFIGURATION
EP18
BALLAST TYPE AND QUANTITY
U 120-277V3 347V
U9
VOLTAGE
See page 68
GLR10
OPTIONS
See page 69
B6011
ACCESSORIES
Standard light output, for T8 lampsEP1 (1) Instant start for (2), (3) or (4) lampsEP2 (2) Instant start for (2) or (4) lamps EPD1 (2) Instant start for (3) or (4) lampsPS1 (1) Programmed start for (2), (3) or
(4) lampsPS2 (2) Programmed start for (2) or (4) lampsPSD1 (2) Programmed start for (3) or (4) lampsHigh light output, for T8 lampsYP1 (1) Instant start for (2), (3) or (4) lampsPS2 (2) Instant start for (2) or (4) lampsYPD1 (2) Instant start for (3) or (4) lamps1 For lamps with inboard/outboard switching
26
WRAPS
HW SeriesNarrow, Medium & Wide
HW
The HW Series wraparound luminaires are designed to provide maximum efficiency generallighting for institutional, industrial and retail environments.
The Prismawrap® refractor in the HW Series strikes the optimum balance of vertical andhorizontal illumination. Precise optical design minimizes glare and completely obscures lampimages at normal viewing angles.
FEATURES:• Lens hinged from either side and can be easily removed for maintenance• Shipped fully assembled and ready to install• Injection molded clear acrylic lens provides high vertical footcandles and high
task contrast
Example: HW S N 4 X S H61 O40 EP1 U
How to Construct a Catalog Number:
| INDOOR | FLUORESCENT | Wraps | HW Series – Narrow, Medium & Wide www.holophane.com
HW HW Series S 22 GaugeT 20 Gauge
HW1
LUMINAIRE
S2
CHANNEL GAUGE
N | Narrow
S6
DISTRIBUTION
S Spread
M | Medium
X5
REFLECTOR MATERIAL
D White painted steel
H617
DIFFUSER
N onlyH611 Acrylic lens M onlyH712 Prismawrap® lensD713 Prismawrap® lensW onlyH742 Prismawrap® lens1 Injection-molded2 Acrylic3 Impact resistant acrylic
W | Wide
N NarrowM MediumW Wide
N3
HOUSING SIZE
4 4 Feet8 8 Feet
44
LENGTH
Drawings, dimensions and specificationssubject to change.
27
HOLOPHANE®
FLUORESCENT
WRAPS
MIRO® 4
HW Series
Narrow
Medium
Wide
“N” & “M” onlyO40 (1) F32 T8O411 (2) F32 T8“M” & “W” onlyO42 (2) F32 T8O43 (3) F32 T8O451 (4) F32 T8O471 (6) F32 T8“W” onlyO44 (4) F32 T8O491 (8) F32 T81 In tandem
O408
LAMP TYPE &CONFIGURATION
EP19
BALLAST TYPE AND QUANTITY
U 120-277V3 347V
U10
VOLTAGE
See page 70
CP1S11
OPTIONS
See page 71
B5012
ACCESSORIES
“N” and “M” onlyStandard light output, for T8 lampsEP11 (1) Instant start for (1) or (2) lampsPS1 (1) Programmed start for (1) or (2) lampsHigh light output, for T8 lampsYP1 (1) Instant start for (1) or (2) lamps“M” and “W” onlyStandard light output, for T8 lampsEP2 (2) Instant start for (2) or (4) lamps in tandem EP3 (3) Instant start for (6) lamps in tandemEPD2 (2) Instant start for (3) or (6) lampsPS1 (1) Programmed start for (2) or (3) lampsPS2 (2) Programmed start for (6) lampsPS3 (3) Programmed start for (6) lampsPSD2 (2) Programmed start for (3) or (6) lampsHigh light output, for T8 lampsYP1 (1) Instant start for (2), (3) or (4) lampsYP2 (2) Instant start for (6) lampsYP3 (3) Instant start for (6) lampsYPD2 (2) Instant start for (3) or (6) lamps“W” onlyStandard light output, for T8 lampsEP1 (1) Instant start for (4) lampsEP2 (2) Instant start for (8) lampsEP4 (4) Instant start for (8) lamps PS1 (1) Programmed start for (4) lampsPS2 (2) Programmed start for (8) lampsPS4 (4) Programmed start for (8) lampsHigh light output, for T8 lampsYP2 (2) Instant start for (8) lampsYP4 (4) Instant start for (8) lamps1 (4) lamps not available with “N”2 For lamps with inboard/outboard switching
28
WALLMOUNTED WRAPS
WA Series – Angled
WA
A quiet complement to any interior environment, Holophane’s wall mounted wraps offereffective down or up lighting functions with contemporary styling.
The WA Series luminaires are designed to provide a highly efficient light source forstairwells, bathrooms, corridors, or other areas where both vertical and horizontallighting tasks need to be simultaneously serviced from a common wall location.
FEATURES:• Angled 45º from vertical providing excellent horizontal and vertical illumination• Useful for select indirect lighting applications• Available in 2’, 4’ and 8’ lengths• Ceiling or wall mounted
Example: WA S N 4 X N ACL O40 EP1 U
How to Construct a Catalog Number:
| INDOOR | FLUORESCENT | Wallmounted Wraps | Angled www.holophane.com
WA Angledwallmount
S 22 Gauge
WA1
LUMINAIRE
S2
CHANNEL GAUGE
WA | Angled
N6
DISTRIBUTION
N NormalS SpreadT Task
X5
REFLECTOR MATERIAL
D White painted steelX Premium Miro® 4
specular aluminum
ACL7
DIFFUSER
ACL 50% DR acrylic lens N Narrow
N3
HOUSING SIZE
2 2’ Nominal 4 4’ Nominal8 8’ Nominal
44
LENGTH
Drawings, dimensions and specificationssubject to change.
29
HOLOPHANE®
FLUORESCENT
WALLMOUNTED WRAPS
MIRO® 4
WA Series
O20 (1) F17 T8O22 (2) F17 T8O40 (1) F32 T8O42 (2) F32 T8O411 (2) F32 T8O451 (4) F32 T81 In tandem
O408
LAMP TYPE &CONFIGURATION
EP19
BALLAST TYPE AND QUANTITY
U 120-277V3 347V
U10
VOLTAGE
See page 70
CP1S11
OPTIONS
Standard light output, for T8 lampsEP1 (1) Instant start for (1), (2) or (4) lampsEP2 (2) Instant start for (2) or (4) lampsPS1 (1) Programmed start for (1), (2) or (4) lampsHigh light output, for T8 lamps2
YP1 (1) Instant start for (1) or (2) lampsEP2 (2) Instant start for (2) or (4) lampsEPD1 (2) Instant start for (4) lampsYP2 (2) Instant start for (2) or (4) lampsYPD1 (2) Instant start for (4) lamps1 For lamps with inboard/outboard switching
30
COMMERCIAL WRAPS
WR SeriesNarrow & Medium
WR
The WR Series wraparound luminaires are designed to provide efficient general lighting forinstitutional, industrial and retail environments, or wherever an economical, high-performancewraparound is beneficial. With its highly efficient specular optics,modern appearance and versatile features, the WR wraparound naturally lends itselfas an ideal replacement for dated and inefficient louvered fixtures.
FEATURES:• Reflector extends full width and length of the luminaire, maximizing light output• Easy wiring and maintenance• Shipped with lenses ready to install• Miro® 4 enhanced specular aluminum reflector with 95% reflectivity
Example: WR S N 4 X N ACL O40 EP1 U
How to Construct a Catalog Number:
| INDOOR | FLUORESCENT | Commercial Wraps | Narrow & Medium Channel www.holophane.com
WR Commercial S 22 GaugeT 20 Gauge
WR1
LUMINAIRE
S2
CHANNEL GAUGE
WR | Narrow Channel
N6
DISTRIBUTION
N NormalS SpreadT Task
X5
REFLECTOR MATERIAL
D White painted metalX Miro® 4 enhanced
aluminum
ACL7
DIFFUSER
ACL 50% DR acrylic lensN NarrowM Medium
N3
HOUSING SIZE
4 4’ Nominal8 8’ Nominal
44
LENGTH
WR | Medium Channel
Drawings, dimensions and specificationssubject to change.
31
HOLOPHANE®
FLUORESCENT
COMMERCIAL WRAPS
MIRO® 4
WR Series
Narrow Channel
Medium Channel
O40 (1) F32 T8O42 (2) F32 T8O43 (3) F32 T8O411 (2) F32 T8O451 (4) F32 T8O471 (6) F32 T81 In tandem
O408
LAMP TYPE &CONFIGURATION
EP19
BALLAST TYPE AND QUANTITY
U 120-277V3 347V
U11
VOLTAGE
See page 70
CP1S12
OPTIONS
See page 71
SC1813
ACCESSORIES
Standard light output, for T8 lampsEP1 (1) Instant start for (1), (2), (3) or (4) lampsEP2 (2) Instant start for (2) or (4) lamps in tandemEP3 (3) Instant start for (6) lamps in tandemEPD1 (2) Instant start for (3) or (6) lampsPS1 (1) Programmed start for (1), (2), (3) or (4)
lampsPS2 (2) Programmed start for (2), (4) or (6) lampsPS3 (3) Programmed start for (6) lampsPSD1 (2) Programmed start for (3) or (6) lampsHigh light output, for T8 lampsYP1 (1) Instant start for (1), (2), (3) or (4) lampsYP2 (2) Instant start for (4) or (6) lampsYP3 (3) Instant start for (6) lampsYPD1 (2) Instant start for (3) or (6) lamps1 For lamps with inboard/outboard switching
32
INDUSTRIALS
HSN/HSM SeriesNarrow & MediumHSN | HSM
The versatile HSN and HSM Series offer an energy efficient solution utilizing specularreflectors to provide premium performance from an economical alternative. Designedto provide maximum efficiency lighting for institutional, industrial, and commercialenvironments, the HSN and HSM commercial channels offer a variety of photometryto suit a range of application needs.
FEATURES:• Available in 4’ and 8’ nominal lengths• Miro® 4 enhanced specular aluminum reflector with 95% reflectivity• Combination endplate/channel connector furnished with each fixture• Specular reflector/ballast cover secured by captive quarter-turn fasteners for easy
access to wireway
Example: HSN S 04 X NNN U O40 EP1 U
How to Construct a Catalog Number:
| INDOOR | FLUORESCENT | Industrials | HSN/HSM Series – Narrow & Medium Channel www.holophane.com
HSN NarrowHSM Medium
HSN1
LUMINAIRE
HSN | Narrow Channel
NNN5
DISTRIBUTION
FTT1 FocusNNN NormalSAA1 SpreadTTT Task“HSM” onlyBGG BroadF30 30º Asymmetric
beamNHH NormalNWG Normal reflector
wire guard slotsSHH SpreadTWG Task reflector wire
guard slots1 “HSN” only
4.90”
10.10”
2.80”
X4
REFLECTOR MATERIAL
D1 White painted steelX Premium Miro® 4
specular aluminum (.020”)Y2 Premium Miro® 4
specular aluminum (.032”)1 “NHH” hood only2 “HSM”, “NWG”, “TWG” only
P PerforationsS No uplightU Uplight slots
U6
UPLIGHT
04 4’ Nominal08 8’ Nominal
043
LENGTH
HSM | Medium Channel – Broad
4.2”
3.5”
12.5”
S 22 Gauge (.030”)T 20 Gauge (.036”)
S2
CHANNEL GAUGE
Drawings, dimensions and specificationssubject to change.
33
HOLOPHANE®
FLUORESCENT
INDUSTRIALS
MIRO® 4
HSN/HSM Series
Narrow Channel
Medium Channel
HSNO40 (1) F32 T8O411 (2) F32 T8HSMO40 (1) F32 T8O411 (2) F32 T8O42 (2) F32 T8O43 (3) F32 T8O451 (4) F32 T8O471 (6) F32 T81 In tandem
O407
LAMP TYPE &CONFIGURATION
EP18
BALLAST TYPE AND QUANTITY
U 120-277V3 347V
U9
VOLTAGE
See page 72
CP1TB10
OPTIONS
See page 73
WGS04411
ACCESSORIES
HSNStandard light output, for T8 lampsEP11 (1) Instant start for (1) or (2) lampsEP2 (2) Instant start for (2) lamps PS1 (1) Programmed start for (1) or (2) lampsHigh light output, for T8 lampsYP1 (1) Instant start for (1 or (2)) lamps
HSMStandard light output, for T8 lampsEP11 (1) Instant start for (1) or (2) lampsEP2 (2) Instant start for (2) lamps PS1 (1) Programmed start for (1) or (2) lampsHigh light output, for T8 lampsYP1 (1) Instant start for (1 or (2)) lampsStandard light output, for T8 lampsEP2 (2) Instant start for (6) lamps in tandemEP3 (3) Instant start for (6) lamps in tandemEPD2 (2) Instant start for (3), (4) or (6) lampsPS1 (1) Programmed start for (3) lampsPS2 (2) Programmed start for (6) lampsPS3 (3) Programmed start for (6) lampsPSD2 (2) Programmed start for (3) or (6) lampsHigh light output, for T8 lampsYP1 (1) Instant start for (3) lampsYP2 (2) Instant start for (6) lampsYP3 (3) Instant start for (6) lampsYPD2 (2) Instant start for (3) or (6) lamps1 (3) or (4) lamps not available with “HSN”2 For lamps with inboard/outboard switching
34
INDUSTRIALS
HIS Series
HIS
Designed to provide maximum efficiency lighting for industrial and commercial environments,the HIS specialty industrial luminaire offers a variety of photometry to suit a range ofapplication needs.
The precision engineered specular reflectors optimize distribution while strategicallypositioned lamps maximize illumination directly onto the vertical surface, resulting inexcellent visibility on the task and lower energy consumption.
FEATURES:• Rugged industrial housing provides added durability• Miro® 4 enhanced specular aluminum reflector with 95% reflectivity• Screw-on endplates• Channel connectors furnished standard• Optional clamp-on hangers available for ease of installation• Plastic joiner clips provided for continuous row configuration
Example: HIS S 04 X SNN N O40 EP1 U
How to Construct a Catalog Number:
| INDOOR | FLUORESCENT | Industrials | HIS Series – Wide Channel www.holophane.com
HIS Wide S 22 Gauge
HIS1
LUMINAIRE
S2
CHANNEL GAUGE
HIS | Wide Channel
SNN5
DISTRIBUTION
SWW SpreadFTT Focus
4.70”
7.30”
5.00”
X4
REFLECTOR MATERIAL
X Premium Miro® 4specular aluminum (.020”)
Y1 Premium Miro® 4specular aluminum (.032”)
P PerforationsS No uplightU Uplight slots
N6
UPLIGHT
04 4’ Nominal08 8’ Nominal
043
LENGTH
Drawings, dimensions and specificationssubject to change.
35
HOLOPHANE®
FLUORESCENT
INDUSTRIALS
MIRO® 4
HIS SeriesWide Channel
O42 (2) F32 T8O43 (3) F32 T8O451 (4) F32 T8O471 (6) F32 T81 In tandem
O407
LAMP TYPE &CONFIGURATION
EP18
BALLAST TYPE AND QUANTITY
U 120-277V3 347V
U9
VOLTAGE
See page 72
B9010
OPTIONS
See page 73
MHHC11
ACCESSORIES
Standard light output, for T8 lampsEP1 (1) Instant start for (2), (3) or (4) lampsEP2 (2) Instant start for (2) or (6) lamps in
tandem EP3 (3) Instant start for (6) lamps in tandemEPD1 (2) Instant start for (3) or (6) lampsPS1 (1) Programmed start for (2), (3) or (4)
lampsPS2 (2) Programmed start for (2) or (6) lampsPS3 (3) Programmed start for (6) lampsPSD1 (2) Programmed start for (3) or (6) lampsHigh light output, for T8 lampsYP1 (1) Instant start for (2), (3) or (4) lampsYP2 (2) Instant start for (2), (4) or (6) lampsYP3 (3) Instant start for (6) lampsYPD1 (2) Instant start for (3) or (6) lamps1 For lamps with inboard/outboard switching
36
INDUSTRIALS
IC Series – Standard Industrial
IC
The IC luminaire is a highly versatile light source that performs exceptionally well in both lightindustrial and specialty retail environments. Ideal applications for the IC luminaire includetask and aisle lighting for warehouse and retail settings, and general lighting for openassembly and retail distribution areas.
FEATURES:• Low profile, light weight housing and reflectors are easy to install and align• Lamps positioned outside luminaire body permit 10% indirect component with
uplight option• Optional sliding support bracket allows for ease of installation• Luminaire efficiency for all versions are 90% or better using optimized reflector
designs• Miro® 4 enhanced specular aluminum reflector with 95% reflectivity
Example: IC S 04 X SSS U O42 EP1 U
How to Construct a Catalog Number:
| INDOOR | FLUORESCENT | Industrials | IC Series – Standard www.holophane.com
IC StandardIndustrial
S 22 Gauge (.030”)
IC1
LUMINAIRE
S2
CHANNEL GAUGE
IC | Standard Industrial
SSS5
DISTRIBUTION
SSS SpreadTAS AsymmetricTST1 Task1 Available with “Y”
material only
X4
REFLECTOR MATERIAL
X Miro® 4 enhancedaluminum
Y Premium Miro® 4enhanced aluminum
P PerforationsS No uplightU Uplight slots
U6
UPLIGHT
04 4’ Nominal08 8’ Nominal
043
LENGTH
Drawings, dimensions and specificationssubject to change.
37
HOLOPHANE®
FLUORESCENT
INDUSTRIALS
MIRO® 4
IC SeriesStandard
O42 (2) F32 T8O451 (4) F32 T81 In tandem
O427
LAMP TYPE &CONFIGURATION
EP18
BALLAST TYPE AND QUANTITY
U 120-277V3 347V
U9
VOLTAGE
See page 72
PLF1G10
OPTIONS
See page 73
MHICS11
ACCESSORIES
Standard light output, for T8 lampsEP1 (1) Instant start for (2) or (4) lampsEP2 (2) Instant start for (2) lamps PS1 (1) Programmed start for (2) or (4)
lampsHigh light output, for T8 lampsYP1 (1) Instant start for (2) or (4) lamps
38
INDUSTRIALS
TN Series – Very Narrow Channel
TN
The focused beam of the TN Series offers an energy efficient solution to light highstacks or tall racks of goods. The one lamp profile luminaire directs a precisely aimed,narrow beam of light into the aisle way providing full visibility of vertical surfaces.
FEATURES:• Highly efficient fixture suitable for surface mounting to any type ceiling• 1-lamp T5 or T5HO profile• Focus distribution• Easy wiring and maintenance• Miro® 4 enhanced specular aluminum reflector with 95% reflectivity• Contact rep for special continuous row applications
Example: TN T 04 X FTT S K40 MK1 U
How to Construct a Catalog Number:
| INDOOR | FLUORESCENT | Industrials | TN Series – Very Narrow Channel www.holophane.com
TN Very NarrowChannel
T 20 gauge (.036”)
TN1
LUMINAIRE
T2
CHANNEL GAUGE
TN | Very Narrow Channel
FTT5
DISTRIBUTION
FTT Focus
X4
REFLECTOR MATERIAL
X Miro® 4 enhancedaluminum (.020”)
Y Premium Miro® 4enhanced aluminum
P PerforationsS No uplightU Uplight slots
S6
UPLIGHT
04 4’ nominal08 8’ nominal
043
LENGTH
Drawings, dimensions and specificationssubject to change.
39
HOLOPHANE®
FLUORESCENT
INDUSTRIALS
MIRO® 4
TN SeriesVery Narrow Channel
K40 (1) T5HOL40 (1) T5HOK411 (2) T5HOL411 (2) T5HO1 In tandem
K407
LAMP TYPE &CONFIGURATION
MK18
BALLAST TYPE AND QUANTITY
U 120-277VH 347-480V
U9
VOLTAGE
See page 72
PLF1G10
OPTIONS
See page 73
THS08J211
ACCESSORIES
Standard light output, for T5 lampsML1 (1) Programmed start for (1) or (2) lampsStandard light output, for T5HO lampsMK1 (1) Programmed start for (1) or (2) lamps MK2 (2) Programmed start for (2) lamps
40
INDUSTRIALS
CC Series – Flat Blade
CC
Premium performance from a commercial grade industrial luminaire describes the CC Series.This medium-duty industrial luminaire features a unique flat-blade baffle to reduce glarewhile increasing its aesthetic appeal. It is designed for interior locations where an attractiveappearance must be combined with rugged performance and high efficiency. Applicationsinclude gymnasiums, high-volume retail outlets, automotive service centers, and higher-endindustrial plants. A variety of photometric distributions and lamp configurations are availableto suit a range of lighting needs.
FEATURES:• Easy wiring and maintenance• Normal, spread and task photometric beams available• Optional slots provide uplight for ceiling brightness enhancing sense of spaciousness• Miro® 4 enhanced specular aluminum reflector with 95% reflectivity• Flush, post-painted knock-outs on endplates allow continuous row installation
while maintaining a finished appearance at end of rows
Example: CC P 4 X S NN S O42 EP1 U
How to Construct a Catalog Number:
| INDOOR | FLUORESCENT | Industrials | CC Series – Flat Blade www.holophane.com
CC CC Series P 20 Gauge (.036”)G1 20 Gauge (.036”)1 Galvanized
CC1
LUMINAIRE
P2
CHANNEL GAUGE
CC | Flat Blade
S5
DISTRIBUTION
S SpreadT1 TaskA2 Asymmetric1 T5HO only2 Available with T8
in O42, O45 only
NN6
DIFFUSER
B0 White baffleNN NonePB Polycarbonate lensWD Wire guardWG Grille
X4
REFLECTOR MATERIAL
X Miro® 4 enhanced aluminum
Y Premium Miro® 4enhanced aluminum
S No uplightU Uplight slots
S7
UPLIGHT
4 4’ Nominal8 8’ Nominal
43
LENGTH
Drawings, dimensions and specificationssubject to change.
41
HOLOPHANE®
FLUORESCENT
INDUSTRIALS
MIRO® 4
CC SeriesFlat Blade
O42 (2) F32 T8O43 (3) F32 T8O451 (4) F32 T8O471 (6) F32 T8K42 (2) T5HOK43 (3) T5HOK451 (4) T5HOK471 (6) T5HO1 In tandem
O428
LAMP TYPE &CONFIGURATION
EP1 9
BALLAST TYPE AND QUANTITY
U 120-277V31 347VH2 347-480V1 T8 only2 T5 only
U10
VOLTAGE
See page 72
PLF2AG11
OPTIONS
See page 73
SC3612
ACCESSORIES
Standard light output, for T8 lampsEP1 (1) Instant start for (2), (3) or (4) lampsEP2 (2) Instant start for (2), (4) or (6) lampsEP3 (3) Instant start for (6) lamps EPD1 (2) Instant start for (3) or (6) lampsPS1 (1) Programmed start for (2), (3) or
(4) lampsPS2 (2) Programmed start for (6) lampsPS3 (3) Programmed start for (6) lampsPSD1 (2) Programmed start for (3) or (6)
lampsHigh light output, for T8 lampsYP1 (1) Instant start for (2), (3) or (4) lampsYP2 (2) Instant start for (2), (4) or (6) lampsYP3 (3) Instant start for (6) lampsYPD1 (2) Instant start for (3) lampsStandard light output, for T5HO lampsMK1 (1) Programmed start for (2) lampsMK2 (2) Programmed start for (2) lampsMK3 (3) Programmed start for (6) lampsMKD (2) Programmed start for (3) lamps1 For lamps with inboard/outboard switching
42
INDUSTRIALS
IW Series – Premium Industrial
IW
The IW Series heavy-duty industrial incorporates specular reflectors to precisely direct andcontrol the light. The rugged housing is designed to be installed into the most demanding ofapplications. It is designed for interior locations where an attractive appearance must becombined with rugged performance and high efficiency. Applications include gymnasiums,high-volume retail outlets, automotive service centers and higher-end industrial plants.
FEATURES:• Easy wiring and maintenance• Normal, spread and task photometric beams available• One, two or three lamp profile reflectors extend full length of channel,
maximizing light output• Miro® 4 enhanced specular aluminum reflector with 95% reflectivity
Example: IW T 04 X S NN S O40 EP1 U
How to Construct a Catalog Number:
| INDOOR | FLUORESCENT | Industrials | IW Series – Premium Industrial www.holophane.com
IW | Premium Industrial
IW IW Series P 20 Gauge (.036”)G1 20 Gauge (.036”)1 Galvanized
IW1
LUMINAIRE
P2
CHANNEL GAUGE
S5
DISTRIBUTION
S1 SpreadT1 TaskA2 Asymmetric1 “X” reflector only2 “D” reflector only
NN6
DIFFUSER
B0 White baffle - 1”PB Polycarbonate lensNN OpenWG Wire grille
X4
REFLECTOR MATERIAL
D White painted steelX Miro® 4 enhanced
aluminum
S No uplightU Uplight slots
S7
UPLIGHT
04 4’ Nominal08 8’ Nominal
043
LENGTH
Drawings, dimensions and specificationssubject to change.
43
HOLOPHANE®
FLUORESCENT
INDUSTRIALS
MIRO® 4
IW SeriesPremium Industrial
O40 (1) F32 T8O42 (2) F32 T8O43 (3) F32 T8O411 (2) F32 T8O451 (4) F32 T8O471 (6) F32 T81 In tandem
O428
LAMP TYPE &CONFIGURATION
EP1 9
BALLAST TYPE AND QUANTITY
U 120-277V3 347V
U10
VOLTAGE
See page 72
CP1TL1011
OPTIONS
See page 73
SC2412
ACCESSORIES
Standard light output, for T8 lampsEP1 (1) Instant start for (1), (2), (3) or (4) lampsEP2 (2) Instant start for (2), (4) or (6) lamps in
tandemEP31 (3) Instant start for (6) lamps EPD2 (2) Instant start for (3) or (6) lampsPS1 (1) Programmed start for (1), (2), (3) or
(4) lampsPS2 (2) Programmed start for (2), (4) or (6)
lampsPS3 (3) Programmed start for (6) lampsPSD2 (2) Programmed start for (3) or (6) lampsHigh light output, for T8 lampsYP1 (1) Instant start for (1), (2), (3) or (4)
lampsYP2 (2) Instant start for (2), (4) or (6) lampsYP3 (3) Instant start for (6) lampsYPD2 (2) Instant start for (3) or (6) lamps1 In tandem2 For lamps with inboard/outboard switching
44
INDUSTRIALS
IT Series – Heavy Duty Industrial
IT
The IT Series exemplifies the sturdy manufacturing and intelligent design that sets Holophaneluminaires apart from others in the industry. Structurally robust yet architecturally pleasing,this durable luminaire is designed for rugged applications such as industrial, commercial,welding or automotive inspection areas.
FEATURES:• Housing is constructed of heavy duty 20 gauge CRS• Can be mounted at 0 or 45 degrees to allow precise aiming of beam• Easy wiring and maintenance provided by ample knockouts and removable
reflector ballast cover• Normal, spread and task photometric beams available• Spot welded, 10 gauge steel mounting brackets provide rigid support• All exposed surfaces powder-coated for maximum durability• Miro® 4 enhanced specular aluminum reflector with 95% reflectivity• Heavy-duty door frame secured with single-piece piano hinge
and rotary cam latchesExample: IT G 14 X S WGG 042 EP1 U
How to Construct a Catalog Number:
| INDOOR | FLUORESCENT | Industrials | IT Series – Heavy Duty Industrial www.holophane.com
IT | Heavy Duty Industrial
5.20”
10.70”
6.30”
IT Heavy DutyIndustrial
G GalvanizedW White
IT1
LUMINAIRE
G2
HOUSING
S5
DISTRIBUTION
N NormalS SpreadT Task
WGG6
DIFFUSER
CAC Clear acrylicCGL Tempered glassH24 Acrylic #8244H55 Acrylic #6255POL PolycarbonateWGN Wire grillWGG Wire grill with glassWGH Wire grill with H24
X4
REFLECTOR MATERIAL
D1 White painted steelX Miro® 4 enhanced
aluminum .020”1 Available with “N” only
14 4’ Nominal18 8’ Nominal
143
SIZE
Drawings, dimensions and specificationssubject to change.
45
HOLOPHANE®
FLUORESCENT
INDUSTRIALS
MIRO® 4
IT SeriesHeavy Duty Industrial
EP1 9
BALLAST TYPE AND QUANTITY
U 120-277VH1 347-480V1 T5H0 only
U10
VOLTAGE
Standard light output, for T8 lampsEP1 (1) Instant start for (1), (2) or (4) lampsEP2 (2) Instant start for (2) or (4) lamps High light output, for T8 lampsYP1 (1) Instant start for (2), (3) or (4) lampsStandard light output, for (2) T5HO lampsMK1 (1) Programmed startMK2 (2) Programmed start
O40 (1) F32 T8O42 (2) F32 T8O41 (2) F32 T8O45 (4) F32 T8K40 (1) F54 T5HOK42 (2) F54 T5HOK41 (2) F54 T5HOK45 (4) F54 T5HO
O428
LAMP TYPE &CONFIGURATION See page 72
CP1TL1011
OPTIONS
See page 73
B5012
ACCESSORIES
46
STRIPS
HSN/HSM SeriesCommercial Narrow & Medium
HSN | HSM
The HSN (single lamp) and HSM (1, 2, 3 lamp) Series are functional and multi-purposecommercial grade strips that incorporate premium performance with construction durability.
FEATURES:• Easy wiring and maintenance• High gloss baked white enamel finish• Highly efficient fixture suitable for surface mounting to any type of ceiling• Combination endplate/channel connector furnished with each fixture
| INDOOR | FLUORESCENT | Strips | HSM, HSN Series – Commercial www.holophane.com
HSN | Commercial Narrow
3.40”
2.80”
HSM | Commercial Medium
3.50”
4.20”
Example: HSN S 04 D SNN N O40 EP1 U
How to Construct a Catalog Number:
HSN NarrowHSM Medium
HSN1
LUMINAIRE
SNN5
DISTRIBUTION
SNN Spread
D4
REFLECTOR MATERIAL
D White painted ballast cover N No reflector
N6
UPLIGHT
04 4’ Nominal08 8’ Nominal
043
LENGTH
S 22 Gauge (.030”)T 20 Gauge (.036”)
S2
CHANNEL GAUGE
Drawings, dimensions and specificationssubject to change.
47
HOLOPHANE®
FLUORESCENT
STRIPS
MIRO® 4
HSN, HSM SeriesCommercial
HSNO40 (1) F32 T8O411 (2) F32 T8HSMO40 (1) F32 T8O411 (2) F32 T8O42 (2) F32 T8O43 (3) F32 T8O451 (4) F32 T8O471 (6) F32 T81 In tandem
O407
LAMP TYPE &CONFIGURATION
EP18
BALLAST TYPE AND QUANTITY
U 120-277V3 347V
U9
VOLTAGE
See page 74
GMF10
OPTIONS
See page 75
MHHC11
ACCESSORIES
HSNStandard light output, for T8 lampsEP1 (1) Instant start for (1), (2) or (3) lampsEP2 (2) Instant start for (2) lamps PS1 (1) Programmed start for (1) or (2) lampsHigh light output, for T8 lampsYP1 (1) Instant start for (1) or (2) lampsHSMStandard light output, for T8 lampsEP1 (1) Instant start for (1), (2), (3) or (4) lampsEP2 (2) Instant start for (2) lamps PS1 (1) Programmed start for (1) or (2) lampsHigh light output, for T8 lampsYP1 (1) Instant start for (1) or (2) lampsStandard light output, for T8 lampsEP2 (2) Instant start for (6) lamps in tandemEP3 (3) Instant start for (6) lamps in tandemEPD1 (2) Instant start for (3), (4) or (6) lampsPS1 (1) Programmed start for (3) lampsPS2 (2) Programmed start for (6) lampsPS3 (3) Programmed start for (6) lampsPSD1 (2) Programmed start for (3), (4) or (6) lampsHigh light output, for T8 lampsYP1 (1) Instant start for (3) lampsYP2 (2) Instant start for (6) lampsYP3 (3) Instant start for (6) lampsYPD1 (2) Instant start for (3) or (4) lamps1 For lamps with inboard/outboard switching
HSN
HSM
48
STRIPS
HIS SeriesCommercial Wide
HIS
The HIS (very wide) Series provides high efficiency illumination for mercantile applications,warehouses and store rooms where added durability from rugged construction is desired.
FEATURES:• Screw on end plates• Optional clamp-on hangers available for ease of installation• Easy wiring and maintenance• High gloss baked white enamel finish• Highly efficient fixture suitable for surface mounting to any type ceiling• Combination end plate/channel connector furnished with each luminaire
| INDOOR | FLUORESCENT | Strips | HIS Series www.holophane.com
HIS | Commercial Wide
4.6”
5.0”
Example: HIS S 04 D SNN N O40 EP1 U
How to Construct a Catalog Number:
HIS Wide S 22 Gauge
HIS1
LUMINAIRE
S2
CHANNEL GAUGE
SNN5
DISTRIBUTION
SNN Spread
D4
REFLECTOR MATERIAL
D White painted ballast cover
N No reflector
N6
UPLIGHT
04 4’ Nominal08 8’ Nominal
043
LENGTH
Drawings, dimensions and specificationssubject to change.
49
HOLOPHANE®
FLUORESCENT
STRIPS
MIRO® 4
HIS SeriesCommercial
O42 (2) F32 T8O43 (3) F32 T8O451 (4) F32 T8O471 (6) F32 T81 In tandem
O407
LAMP TYPE &CONFIGURATION
EP18
BALLAST TYPE AND QUANTITY
U 120-277V3 347V
U9
VOLTAGE
See page 74
CP1T10
OPTIONS
See page 75
MHTHUN11
ACCESSORIES
Standard light output, for T8 lampsEP1 (1) Instant start for (2), (3) or (4) lampsEP2 (2) Instant start for (2) lamps EP2 (2) Instant start for (6) lamps in tandemEP3 (3) Instant start for (6) lamps in tandemEPD1 (2) Instant start for (3) or (6) lampsPS1 (1) Programmed start for (2) or (3) lampsPS2 (2) Programmed start for (6) lampsPS3 (3) Programmed start for (6) lampsPSD1 (2) Programmed start for (3), (4) or )6)
lampsHigh light output, for T8 lampsYP1 (1) Instant start for (2) or (3) lampYP2 (2) Instant start for (6) lampsYP3 (3) Instant start for (6) lampsYPD1 (2) Instant start for (3) or (4) lamps1 For lamps with inboard/outboard switching
50
STRIPS
TN SeriesVery Narrow
TN
The TN (very narrow) Series provides high efficiency illumination for mercantile applications,warehouses and store rooms where a small profile is desired.
FEATURES:• Highly efficient luminaire suitable for surface mounting to any type ceiling• Easy wiring and maintenance• 1 Lamp T5 or T5HO profile• High gloss baked white enamel finish
Example: TN T 04 D SNN N K40 MK1 U
How to Construct a Catalog Number:
| INDOOR | FLUORESCENT | Strips | TN Series www.holophane.com
TN | Commercial Very Narrow
TN Very Narrow T 20 Gauge (.036”)
TN1
LUMINAIRE
T2
CHANNEL GAUGE
SNN5
DISTRIBUTION
SNN Spread
D4
REFLECTOR MATERIAL
D White painted ballastcover
N No reflector
N6
UPLIGHT
04 4’ Nominal08 8’ Nominal
043
LENGTH
Drawings, dimensions and specificationssubject to change.
51
HOLOPHANE®
FLUORESCENT
STRIPS
MIRO® 4
TN SeriesCommercial
K40 (1) T5HOL40 (1) T5HOK411 (2) T5HOL411 (2) T5HO1 In tandem
K407
LAMP TYPE &CONFIGURATION
MK18
BALLAST TYPE AND QUANTITY
U 120-277VH 347-480V
U9
VOLTAGE
See page 74
GLR10
OPTIONS
See page 75
THS08J211
ACCESSORIES
Standard light output, for T5 lampsML1 (1) Programmed start for (1) or (2) lampsStandard light output, for T5HO lampsMK1 (1) Programmed start for (1) or (2) lamps MK2 (2) Programmed start for (2) lamps
52
SPECIALTY
Controlume®
CTL
The Controlume Series is ideal for harsh or wet environments where materials such assteel and aluminum may deteriorate. Applications requiring emergency power, impactresistance, battery backup, instant-on starting or hot-restrike such as storage area, watertreatment plants, industrial spaces, parking garages, waste-water treatment facilities orlocker rooms will find this luminaire to be the fixture of choice.
FEATURES:• Self extinguishing, lightweight and durable polycarbonate housing construction• Excellent moisture and dust penetration resistance• Flush fitting and impact resistant• Fiberglass reinforced clips will not rust • Clean, architectural styling
Example: CTL 4 HT 0 254 12
How to Construct a Catalog Number:
| INDOOR | FLUORESCENT | Specialty | Controlume www.holophane.com
0 2 Lamp AC1 1 Lamp emergency2 2 Lamp emergency
CTL1
LUMINAIRE
04
EMERGENCY LAMP QTY.HT ACSE EmergencySA AC and emergency
HT3
OPERATION
CTL | Controlume
CTL Controlume
26” or 50” 3.70”
6.50”
217 (2) 17W T8214 (2) 14W T5224 (2) 24W T5HO232 (2) 32W T8228 (2) 28W T5254 (2) 54W T5HO
2545
LAMP TYPE &CONFIGURATION2 2 Feet
4 4 Feet
42
LENGTH
Drawings, dimensions and specificationssubject to change.
IP 66 RATED
53
HOLOPHANE®
FLUORESCENT
SPECIALTY
Controlume®
U 120-277V31 347VH2 347-480V1 T8 only2 T5 only
126
VOLTAGE
F1 Single fusing
F17
OPTIONS
54
SPECIALTY
DD Series
DD
The DD luminaire’s narrow specular reflector behind the lamp works in conjunction withthe lenticular lens to provide a consistent linear image. The resulting striped pattern acrossthe entire field of view provides ideal illumination and contrast that enhances the ability ofinspectors to find minor surface imperfections without causing visual fatigue. The luminaireis easily installed to a strut frame with adjustable “clamp-on” brackets (two provided perluminaire).
FEATURES:• Quick assembly on site• Consult factory for correct spacing and mounting methodology• Miro® 4 enhanced specular aluminum reflector with 95% reflectivity
Example: DD S C 02 X S O20 EP1 U
How to Construct a Catalog Number:
| INDOOR | FLUORESCENT | Specialty | DD Series www.holophane.com
DD DefectDetection
S 22 Gauge steel (.030”)
DD1
LUMINAIRE
S2
CHANNEL GAUGE
C No cord or plugH Holoflex plugS DS-flex cord and plug
C3
WIRING
DD | Defect Detection
S6
DISTRIBUTION
S Spread
X5
REFLECTOR MATERIAL
X Miro® 4 enhancedaluminum
02 2 Feet04 4 Feet08 8 Feet
024
LENGTH
Drawings, dimensions and specificationssubject to change.
55
HOLOPHANE®
FLUORESCENT
SPECIALTY
MIRO® 4
DD SeriesDefect Detection
O20 (1) FO17 T8O40 (1) FO32 T8O41 (2) FO32 T8
O207
LAMP TYPE &CONFIGURATION Standard light output, for T8 lamps
EP1 (1) Instant start for (1) or (2) lamps
EP18
BALLAST TYPE AND QUANTITY
U 120-277V31 347VH2 347-480V1 T8 only2 T5 only
U9
VOLTAGE
See page 74
BLP55010
OPTIONS
Consult factory
GLR11
ACCESSORIES
56
SPECIALTY
EM/EN Series
EM | EN
The EM/EN Series is an attractive and energy-efficient surface-mount or suspended linearfluorescent luminaire, suitable for wet, damp, and/or cold locations. For challengingsituations where relatively low fixture mounting heights and wide fixture spacings arecommon, the EM/EN Series offers an ideal solution with its wide photometric distribution,low profile, and impact-resistant construction.
FEATURES:• Attractively contoured diffuser obscures lamp image while maintaining high
transmission of light• Miro® 4 enhanced specular aluminum reflector with 95% reflectivity• Stainless steel latches and hanging brackets are standard (STSL MTH)• Easily mounted to ceilings or suspended with chain, cable, or rod using
mounting brackets provided• Pre-drilled holes for power connection with watertight plugs
provided for maximum flexibility• Available with many electronic ballast optionsExample: EM S 04 Y S BMP O40 EP1 U
How to Construct a Catalog Number:
| INDOOR | FLUORESCENT | Specialty | EM, EN Series www.holophane.com
S 22 Gauge (.030”)
EM1
LUMINAIRE
S2
CHANNEL GAUGE
EM | Medium
EM 7” Wide (medium)EN 4” Wide (narrow)
S5
DISTRIBUTION
B BroadS1 Spread1 EM only
BMP6
LENS
BMP Molded polycarbonate
4.13”
6.80”
4.13”
6.80”
Y4
REFLECTOR MATERIAL
Y Miro® 4 enhancedaluminum (.032”)
EN | Narrow
4.13”
4.52”
04 4’ Nominal081 8’ Nominal1 EM only
043
LENGTH
1 lamp
1 lamp
2 lamp
Drawings, dimensions and specificationssubject to change.
IP 65 RATED
57
HOLOPHANE®
FLUORESCENT
SPECIALTY
MIRO® 4
EM/EN Series
EM Series
EN Series
O40 (1) F32 T8K40 (1) F54 T5HOEM onlyO411 (2) F32 T8O421 (2) F32 T8O451 (4) F32 T8K411 (2) F54 T5HO1 In tandem
O407
LAMP TYPE &CONFIGURATION Standard light output, for T8 lamps
EP1 (1) Instant start for (1) lampPS1 (1) Programmed start for (1) lampStandard light output, for T5HO lampsMK1 (1) Programmed start for (1) lampHigh light output, for T8 lampsYP1 (1) Instant start for (1) lampEM onlyStandard light output, for T8 lampsEP1 (1) Instant start for (1), (2) or (4) lampsEP2 (2) Instant start for (2) lamps PS1 (1) Programmed start for (2) or (4) lampsHigh light output, for T8 lampsYP1 (1) Instant start for (2) or (4) lampsYP2 (2) Instant start for (4) lampsStandard light output, for T5HO lampsMK1 (1) Programmed start for (1) or (2) lampsMK2 (2) Programmed start for (1) or (2) lamps
EP18
BALLAST TYPE AND QUANTITY
U 120-277V31 347VH2 347-480V1 T8 only2 T5 only
U9
VOLTAGE
See page 74
BDL50010
OPTIONS
See page 75
GLR11
ACCESSORIES
58
SPECIALTY
HES Series
HES
The HES Series is designed to provide maximum efficiency lighting for institutional, industrialand commercial environments where an enclosed and gasketed fiberglass body luminaire isdesired. This luminaire is suitable for exterior, wet location, and damp environments.It is available in a choice of sizes, mounting, lamp configurations and beam patterns tocustomize the light output to meet the diverse needs of offices, warehouses, schools,hospitals, and industrial areas where enclosed and gasketed luminaires are a must.
FEATURES:• Diffuser secured to fully gasketed housing by captive corrosion-resistant cam
action latches• Miro® 4 enhanced specular aluminum reflector with 95% reflectivity• Post painted metal components• Fiberglass housing• Shatter resistant 15% DR acrylic lens• Optional 50% DR acrylic lens for increased impact resistance
Example: HES S 04 X SSS N O40 EP1 U
How to Construct a Catalog Number:
| INDOOR | FLUORESCENT | Specialty | HES Series www.holophane.com
HES Enclosed,gasketed
S 22 Gauge steel (.030”)T 20 Gauge steel (.036”)
HES1
LUMINAIRE
S2
CHANNEL GAUGE
HES | Enclosed and Gasketed
5.60”
7.60”
X4
REFLECTOR MATERIAL
X Miro® 4 enhancedaluminum (.020”)
D White painted steel (.020”)
04 4’ Nominal08 8’ Nominal
043
LENGTH
SSS5
DISTRIBUTION
SSS SpreadBBB1 BroadF302 30º Asymmetric beamFTT3 FocusNNN2 NormalTTT2 Task1 Available with “X” only2 Available with “O42” and
“X” only3 Available with “O40” and
“X” only
N6
UPLIGHT
N No uplight
Drawings, dimensions and specificationssubject to change.
IP 65 RATED
59
HOLOPHANE®
FLUORESCENT
SPECIALTY
MIRO® 4
HES SeriesEnclosed and Gasketed
O40 (1) FO32 T8O41! (2) FO32 T8O42 (2) FO32 T8O45! (4) FO32 T81 In tandem
O407
LAMP TYPE &CONFIGURATION Standard light output, for T8 lamps
EP1 (1) Instant start for (1), (2) or (4) lampsEP2 (2) Instant start for (2) lamps EPD1 (2) Instant start for (4) lampsPS1 (1) Programmed start for (1), (2) or (4)
lampsPSD1 (2) Programmed start for (4) lampsHigh light output, for T8 lampsYP1 (1) Instant start for (1) or (2) lampsYPD1 (2) Instant start for (4) lamps1 For lamps with inboard/outboard switching
EP18
BALLAST TYPE AND QUANTITY
U 120-277V3 347V
U9
VOLTAGE
See page 74
BDL50010
OPTIONS
See page 75
GLR11
ACCESSORIES
60
SPECIALTY
TA Series
TA
The TA series recessed angled troffer combines an angled lens, in one or two lamp profiles,with an asymmetric reflector to provide precise photometry that efficiently lights boards,wall displays, or bulletin boards with very little spill light and no glare. Other uses for theTA Series include display lighting for retail applications, auditorium lighting with the fixturesfacing toward the presenter, indoor tracks with fixtures used as forward lighting in thedirection of the runners, and task lighting in light industrial situations.
FEATURES:• Highly efficient asymmetric distribution• Gloss white baked enamel finish• Choice of regressed aluminum or flush steel door• Easy wiring and maintenance• Miro® 4 enhanced specular aluminum reflector with 95% reflectivity
Example: TA G S 14 X A A12 O40 EP1 U
How to Construct a Catalog Number:
| INDOOR | FLUORESCENT | Specialty | TA Series www.holophane.com
G Grid
TA1
LUMINAIRE
G2
MOUNTING
S Flat steel (.030” housing)T Flat steel (.036” housing)R Regressed aluminum,
(.030” housing)Q Regressed aluminum,
(.036” housing)
S3
DOOR FRAME
TA | Recessed Troffer Angled Lens
TA Recessed troffer,angled lens
44
SIZE
4 4’ Nominal
A6
DISTRIBUTION
A Asymmetric
X5
REFLECTOR MATERIAL
X Miro® 4 enhancedaluminum (.020”)
A127
DIFFUSER
A12 Acrylic, .110” lensB12 Acrylic, .110” lensH24 Acrylic, 8224 lensH46 Acrylic, 8246 lensH48 Acrylic, 8248 lensH55 Acrylic, 6255 lens
Drawings, dimensions and specificationssubject to change.
61
HOLOPHANE®
FLUORESCENT
SPECIALTY
MIRO® 4
TA Series
O40 (1) FO32 T8K40 (1) 54W T5HOK42 (2) 54W T5HO
O408
LAMP TYPE &CONFIGURATION Standard light output, for T8 lamps
EP1 (1) instant start for (1) lampPS1 (1) programmed start for (1) lampHigh light output, for T8 lampsYP1 (1) instant start for (1) lampStandard light output, for T5HO lampsMK1 (1) programmed start for (2) lampsMK21 (2) programmed start for (2) lamps1 120-277V only
EP19
BALLAST TYPE AND QUANTITY
U 120-277V31 347VH2 347-480V1 T8 only2 T5 only
U10
VOLTAGE
See page 74
CP1S11
OPTIONS
See page 75
EQCLIPS12
ACCESSORIES
62
SPECIALTY
7200 Prismatite® Series
7200
The 7200 Prismatite luminaire is compact, energy efficient, rugged and compatible in manydifferent environments. An extruded aluminum body with an etched anodized finish allowsthis fixture to be installed in corrosive, or abusive areas. It is also suitable for wet locations,so areas such as laboratories, chemical plants and canopies are perfect applications for the7200 Prismatite.
FEATURES:• Less than 5” deep• Perfect for areas with low ceiling heights• Available in 2’, 4’ and 8’ lengths• Many ballast types available to meet specific needs• High efficient injection molded prismatic lens distributes light in broader pattern
than conventional industrial fluorescent fixtures
Example: 7200 2 12 P
How to Construct a Catalog Number:
| INDOOR | FLUORESCENT | Specialty | 7200 Prismatite Series www.holophane.com
2 2’ Nominal4 4’ Nominal8 8’ Nominal
72001
LUMINAIRE
22
LENGTH
7200 | Prismatite
7200 Prismatite 2’ housingP 38-40W, T5, CF lamps electronic4’ housingJ T8 265mA lamps, electronicWB 40W R.S., Advance energy savingWS 40W R.S., MagneTek energy savingLT 40W R.S., 0ºF minimum starting temperature4’ or 8’ housingHO 800mA HO -20ºF minimum starting temperature
P4
BALLAST TYPE
12 120 Volt C(UL) US 27 277 Volt C(UL) US
123
VOLTAGE
Drawings, dimensions and specificationssubject to change.
63
HOLOPHANE®
FLUORESCENT
SPECIALTY
MIRO® 4
7200 Prismatite®
Series
DR Impact-resistant acrylic lensP1 Prismatect (corrosion resistant) finishSA Two 1/2” threaded stem adapters
(2’ and 4’) 3 adapters for 8’F Fuse installedDR Imp
DR5
OPTIONS
CRK Continuous row kit (one per fixture)
CRK6
ACCESSORIES
64
SPECIALTY
HEF Series
HEF
Designed especially for cold storage facilities where ambient temperatures are maintainedbetween -20º F and 50º F, the HEF luminaire provides the advantages of T5HO fluorescenttechnology, including highly energy-efficient white light and extended lamp life with minimallumen depreciation. Where every watt of light can add to refrigeration costs, the HEF offerssignificant energy savings over standard metal halide alternatives and improves visual acuityover HPS light sources.
FEATURES:• Mylar coated PVC, double gasketed, hinged, flush door frame• Clear acrylic shielding with optional prismatic lens• Designed for cold storage applications down to and below 0ºF• High gloss, baked white enamel powder coated finish• Miro® 4 enhanced specular aluminum reflector with 95% reflectivity
Example: HEF S 4 X T B12 N K44 MKD U
How to Construct a Catalog Number:
| INDOOR | FLUORESCENT | Specialty | HEF Series www.holophane.com
HEF |
HEF1
LUMINAIRE
HEF HEF Series
T5
DISTRIBUTION
T Task
X4
REFLECTOR MATERIAL
X Miro® 4 enhancedaluminum (.020”)
B126
DIFFUSER
B12 Acrylic, .125” lensCAC Clear acrylic
S 22 Gauge steel (.030”)T 20 Gauge steel (.036”)
S2
CHANNEL GAUGE
4 4 Feet
43
LENGTH
N No uplight
N7
UPLIGHT
3.68”
11.25”
Drawings, dimensions and specificationssubject to change.
65
HOLOPHANE®
FLUORESCENT
SPECIALTY
MIRO® 4
HEF Series
K44 (4) T5HO
K448
LAMP TYPE &CONFIGURATION Standard light output, for T5HO lamps
MKD (2) Programmed start for (4) lamps
MKD9
BALLAST TYPE AND QUANTITY
U 120-277VH 347-480V
U10
VOLTAGE
See page 74
GMF11
OPTIONS
See page 75
HHBS3612
ACCESSORIES
ORDERING GUIDE
Photometric Distributions and Tandem Configurations
| INDOOR | FLUORESCENT | Ordering Guide www.holophane.com66
PhotometryDistributions
This designation in the nomenclaturestring indicates the photometric beamof the reflector design. The reflectorcan create broad beams whichgenerate a wide spread of light, orthe reflector may focus the light, asa spotlight. The beam nomenclatureindicates this spread of light, as well asthe general spacing criteria of eachtype. The photometric diagrams shownare typical of the beam types availablein Holophane fluorescent luminaires.
������ ������ � ��� ���� ���� ���� ����������� � � !� ����� "�#�������������$
������ ������� ��%����� ���� � !����� ��������$
������ ������ � ��������� ���� � � !� ����!��������$
�������������������� !
��� ������������"�� #$���% &
'���'�������������"% &$���% (
������ ������ � ��������� ���� �� �� &� ����&����� � !�������#�!������ ���������� �$
������ ������ � ��������� ���� �� �� &� ����&���� ���� &�#� ��'������� � � !� ���%��������$
���������)���������"% ($���% !
�������)���������"% !
TandemConfigurations
Tandem groups of luminaires aredescribed by adding a number in frontof the code normally used to describethe luminaire. Thus 2, 3, 4 indicatesthe number of luminaires involved inthe combination.“1” represents the single luminaireand is therefore omitted for simplicity.
Two luminaires sharing one ballast. Whentandem luminaires are installed end toend, no additional wires are required tocomplete the lamp circuit. Only the masterluminaire requires power wiring.
Ex: 2 luminaires/1 ballast2 HSN S 08 X NNN S O41 EP1 UWhile tandem groups include the ballastwiring necessary to install luminaires endto end, harnesses required to complete theinstallation of luminaires that are spacedapart are not included. Refer to yourHolophane sales representative for a listingof available tandem wiring accessories.
Ex: 3 luminaires/2 ballasts3 HSN S 04 X NNN S O40 EP1 U
Ex: 4 luminaires/1 ballast4 HSN S 04 X NNN S O40 EP1 U
������
��������
�������������� �������� ������
�� ����
�������
������ ��������
�� ����
�������
������ �������� ������
�� ����
�������
�� ����
�������
������ ��������
�� ����
�������
����������������
Lamp Types, Sizes & Configurations and Diffuser Options
HO
LOPHAN
E®
67
ORD
ERING
GUID
E
Lamp Types and SizesThe most commonly used lamp types inHolophane Fluorescent luminaires arelisted below - for additional options pleasecontact your sales representative. Thefollowing chart indicates the first twodigits in the Lamp Code.
T8 lamps: instant rapid start, medium bipinO2 = F17T8 2 foot lampO3 = F25T8 3 foot lampO4 = F32T8 4 foot lamp
T5 lamps: program rapid start, medium bipinK4 = F54T5/HO 4 foot lampL4 = F28T5 4 foot lamp
Lamp Configurations
Diffuser Options
H55 Lens H24 Lens H46 Lens H48 Lens
The following chart indicates the third digit in the Lamp Code.
1 LAMP C=0
2 LAMPS C=2 C=1
3 LAMPS C=3
5 LAMPS C=F
6 LAMPS C=6 C=7
7 LAMPS C=S
8 LAMPS C=8 C=9
4 LAMPS C=4 C=5
Injection molded virginacrylic with 3/16” McPhailprisms
Injection molded (.24”)virgin acrylic with refractivehemi-spherical prism
Injection molded (.28”)virgin acrylic with refractivehemi-spherical prism anddiffuse sonically weldedinterface
Injection molded (.28”)virgin acrylic with refractivehemi-spherical prism andhigh efficiency sonicallywelded interface
FLUORESCENT
Options and Accessories
68 | INDOOR | FLUORESCENT | Options and Accessories | High Bays and Troffers www.holophane.com
High Bays Troffers
Catalog # Description ST HB HC HAF HIF HP HT T B LS
CP1S NEMA 5-15P - 18/3 6ft, white SJTOW cord set • • • • • •CP1SB NEMA 5-15P - 18/3 6ft, black SJTOW cord set • • • • • •CP1SL08 NEMA 5-15P - 18/3 8ft, white SJTOW cord set • • • • • •CP1SBL08 NEMA 5-15P - 18/3 8ft, black SJTOW cord set • • • • • •CP1SL10 NEMA 5-15P - 18/3 10ft, white SJTOW cord set • • • • • •CP1SBL10 NEMA 5-15P - 18/3 10ft, black SJTOW cord set • • • • • •CP1T NEMA L7-15P - 18/3 6ft, white SJTOW cord set • • • • • •
CP1TB NEMA L7-15P - 18/3 6ft, black SJTOW cord set • • • • • •CP1TL08 NEMA L7-15P - 18/3 8ft , white SJTOW cord set • • • • • •
CP1TBL08 NEMA L7-15P - 18/3 8ft, black SJTOW cord set • • • • • •
CP1TL10 NEMA L7-15P - 18/3 10ft, white SJTOW cord set • • • • • •
CP1TBL10 NEMA L7-15P - 18/3 10ft, black SJTOW cord set • • • • • •CP2T NEMA L24-20P - 16/3 6ft, white SJTOW cord set • • • • • •CP2TL08 NEMA L24-20P - 16/3 8ft, white SJTOW cord set • • • • • •CP2TL10 NEMA L24-20P - 16/3 10ft, white SJTOW cord set • • • • • •CP2T NEMA L8-20P - 16/3 6ft, white SJTOW cord set • •1 •1 •1 •CP2TL08 NEMA L8-20P - 16/3 8ft, white SJTOW cord set • •1 •1 •1 •CP2TL10 NEMA L8-20P - 16/3 10ft, white SJTOW cord set • •1 •1 •1 •HF120SC16/2G03 3’ Holoflex drop, 16 gauge • • • • • •HF120SC16/2G05 5’ Holoflex drop, 16 gauge • • • • • •HF120SC16/2G10 10’ Holoflex drop, 16 gauge • • • • • •HF277SC16/2G03 3’ Holoflex drop, 16 gauge • • • • • •HF277SC16/2G05 5’ Holoflex drop, 16 gauge • • • • • •HF277SC16/2G10 10’ Holoflex drop, 16 gauge • • • • • •PLR1G 4’ or 8’ Plug-in plus ground lead, ballast connected to black
PLR2AG 4’ or 8’ Plug-in plus ground lead, ballast connected to black
PLR2ABG 4’ or 8’ Plug-in plus ground lead, ballast connected to black
PW1236 Flexible conduit 6’ with 12 gauge 2 wire and ground • • • • • • • • • •PW1238 Flexible conduit 8’ with 12 gauge 2 wire and ground • • • • • • • • • •
PW12310 Flexible conduit 10’ with 12 gauge 2 wire and ground • • • • • • • • • •
PW1246 Flexible conduit 6’ with 12 gauge 3 wire and ground • • • • • • • • • •PW1248 Flexible conduit 8’ with 12 gauge 3 wire and ground • • • • • • • • • •PW12410 Flexible conduit 10’ with 12 gauge 3 wire and ground • • • • • • • • • •PWS1836 Flexible conduit 6’ with 18 gauge 2 wire and ground • • • • • • • • • •GLR Fast-blow, internal fuse • • • • • • • • • •GMF Slow-blow, internal fuse • • • • • • • • • •
CORD
& P
LUG
277V
TW
IST
OFF
PLU
G
HO
LOFL
EX II
INTE
RNA
LPL
UG
-INW
IRIN
G
120V
STR
AIG
HT
MO
LDED
PLU
G34
7V T
WIS
TO
FF P
LUG
480V
TW
IST
OFF
PLU
G12
0V2
WIR
E27
7V2
WIR
E1
CIRC
UIT
2 CI
RCUI
T
FUSIN
G
SLOW
BLOW
FAST
BLOW
FLEX
IBLE
CO
ND
UIT
1 Available with T5HO only
HO
LOPHAN
E®
69
OPTIO
NS
AN
DA
CCESSORIES
High Bays Troffers
Catalog # Description ST HB HC HAF HIF HP HT T B LS
B50 For 17W - 32W lamps with 90 minute battery operation for 1 or2 lamps with lumens from 950 to 1350 •1 •1 •1 •
B50ST For 17W - 32W lamps with 90 minute battery operation for 1 or2 lamps with lumens from 950 to 1350. Ballast is self testing •1 •1 •1 •
B60 For 17W - 32W lamps with 90 minute battery operation for 1 or2 lamps with lumens from 600-700 •1 •1 •1 •
B70A For 17W - 32W lamps with 90 minute battery operation for 1lamp with lumens from 600-700 •1 •1 •1 •
B90 For 17W - 32W lamps with 90 minute battery operation for 1lamp with lumens from 500-600 •1 •1 •1 •
B100 For 17W - 32W lamps with 90 minute battery operation for 1lamp with lumens from 350-450 •1 •1 •1 •
BLP550 For F54T5HO lamps with 90 minute battery operation for 1lamp with lumens of 700. Ballast can be used with T5 • •2 •2 •2 •
BDL600For F54T5HO lamps with 90 minute battery operation for 1lamp with lumens of 1250. Ballast can be used with T5 • •2 •2 •2 •
BDL500 For 17W - 32W lamps with 90 minute battery operation for 1 or2 lamps with lumens from 950-1350. Ballast rated damp location
ALPMHEG01ARRC Stainless steel mounting hanger snaps onto fiberglass housing of fixture
EQCLIPS Earthquake Clips - Lay-in troffer support clips • • • •
HHBS Forward facing trapeze hangers, 1 pair, for HEF Series
HHBS36Forward facing trapeze hangers, 1 pair with a pair of 36” jack chain forHEF Series
HHBS60Forward facing trapeze hangers, 1 pair with a pair of 60” jack chain forHEF Series
HSD Trapeze hangers, 1 pair, 1 for each end • •
HSD36 Trapeze hangers, 1 pair, 1 for each end with 1 pair of 36” jack chain • •
HSD60 Trapeze hangers, 1 pair, 1 for each end with 1 pair of 60” jack chain • •
MHHC STRIPHANG, Chain hanger and pair of 36” jack chain
MHICS ICS Bracket set, mounting hanger for ICS channel
MHTHC Mounting hanger for 4 3/16” channel
MHYTGB03BRKTSingle point bracket with pair of double Y toggle 3’long #2 gripple forquick installation, 4’ fixtures only • • • •
SC18 2, 3/8” diameter, 18”, white stem and canopy set
SC24 2, 3/8” diameter, 24”, white stem and canopy set
SC36 2, 3/8” diameter, 36”, white stem and canopy set
THSD Tong hanger for pendant mounting, 1.125 KO in center • •
THSD2SK Tong hanger for pendant mounting, 1.125 KO in center with pair ofside plates to close hanger off • •
THSD2HB Tong hanger for pendant mounting, 3/4” diameter center hub with pairof side plates to close hanger off • •
ALPDGA22 2 x 2 Grid adapters are used to install grid trimmed troffers in plasterboard or other hard ceilings • • • •
ALPDGA14 1 x 4 Grid adapters are used to install grid trimmed troffers in plasterboard or other hard ceilings •
ALPDGA242 x 4 Grid adapters are used to install grid trimmed troffers in plasterboard or other hard ceilings • • •
WGS044 Wireguard, 1 per 4’ or 2 per 8’ fixture
WGS054 Wireguard, 1 per 4’ or 2 per 8’ fixture
EMER
GEN
CY B
ALL
AST
SM
OU
NTI
NG
OPT
ION
S
FOR
PEN
DA
NT
MO
UN
TIN
GTO
NG
HA
NG
ERS
TRA
PEZE
HA
NG
ERS
GRI
D AD
APTO
RSFO
RHS
MFO
RHS
N
DRY
WA
LL G
RID
AD
APT
ORS
WIR
EGUA
RD
1 Available with T8 only2 Available with T5HO only
Wraps
Catalog # Description HWSN HWSM HWSW WRSN WRSM WA
CP1S NEMA 5-15P - 18/3 6ft, white SJTOW cord set • • • • • •CP1SB NEMA 5-15P - 18/3 6ft, black SJTOW cord set • • • • • •CP1SL08 NEMA 5-15P - 18/3 8ft, white SJTOW cord set • • • • • •CP1SBL08 NEMA 5-15P - 18/3 8ft, black SJTOW cord set • • • • • •CP1SL10 NEMA 5-15P - 18/3 10ft, white SJTOW cord set • • • • • •CP1SBL10 NEMA 5-15P - 18/3 10ft, black SJTOW cord set • • • • • •CP1T NEMA L7-15P - 18/3 6ft, white SJTOW cord set • • • • • •
CP1TB NEMA L7-15P - 18/3 6ft, black SJTOW cord set • • • • • •CP1TL08 NEMA L7-15P - 18/3 8ft , white SJTOW cord set • • • • • •
CP1TBL08 NEMA L7-15P - 18/3 8ft, black SJTOW cord set • • • • • •
CP1TL10 NEMA L7-15P - 18/3 10ft, white SJTOW cord set • • • • • •
CP1TBL10 NEMA L7-15P - 18/3 10ft, black SJTOW cord set • • • • • •CP2T NEMA L24-20P - 16/3 6ft, white SJTOW cord set • • • • • •CP2TL08 NEMA L24-20P - 16/3 8ft, white SJTOW cord set • • • • • •CP2TL10 NEMA L24-20P - 16/3 10ft, white SJTOW cord set • • • • • •CP2T NEMA L8-20P - 16/3 6ft, white SJTOW cord set
CP2TL08 NEMA L8-20P - 16/3 8ft, white SJTOW cord set
CP2TL10 NEMA L8-20P - 16/3 10ft, white SJTOW cord set
HF120SC16/2G03 3’ Holoflex drop, 16 gauge • • • • • •HF120SC16/2G05 5’ Holoflex drop, 16 gauge • • • • • •HF120SC16/2G10 10’ Holoflex drop, 16 gauge • • • • • •HF277SC16/2G03 3’ Holoflex drop, 16 gauge • • • • • •HF277SC16/2G05 5’ Holoflex drop, 16 gauge • • • • • •HF277SC16/2G10 10’ Holoflex drop, 16 gauge • • • • • •PLR1G 4’ or 8’ Plug-in plus ground lead, ballast connected to black • • • • • •PLR2AG 4’ or 8’ Plug-in plus ground lead, ballast connected to black • • • • • •PLR2ABG 4’ or 8’ Plug-in plus ground lead, ballast connected to black • • • • • •PW1236 Flexible conduit 6’ with 12 gauge 2 wire and ground • • • • • •PW1238 Flexible conduit 8’ with 12 gauge 2 wire and ground • • • • • •
PW12310 Flexible conduit 10’ with 12 gauge 2 wire and ground • • • • • •
PW1246 Flexible conduit 6’ with 12 gauge 3 wire and ground • • • • • •PW1248 Flexible conduit 8’ with 12 gauge 3 wire and ground • • • • • •PW12410 Flexible conduit 10’ with 12 gauge 3 wire and ground • • • • • •PWS1836 Flexible conduit 6’ with 18 gauge 2 wire and ground • • • • • •GLR Fast-blow, internal fuse • • • • • •GMF Slow-blow, internal fuse • • • • • •
CORD
& P
LUG
277V
TW
IST
OFF
PLU
G
HO
LOFL
EX II
INTE
RNA
LPL
UG
-INW
IRIN
G
120V
STR
AIG
HT
MO
LDED
PLU
G34
7V T
WIS
TO
FF P
LUG
480V
TW
IST
OFF
PLU
G12
0V2
WIR
E27
7V2
WIR
E1
CIRC
UIT
2 CI
RCUI
T
FUSIN
G
SLOW
BLOW
FAST
BLOW
FLEX
IBLE
CO
ND
UIT
FLUORESCENT
Options and Accessories
70 | INDOOR | FLUORESCENT | Wraps www.holophane.com
71
HO
LOPHAN
E®
71
OPTIO
NS
AN
DA
CCESSORIES
Wraps
Catalog # Description HWSN HWSM HWSW WRSN WRSM WA
B50 For 17W - 32W lamps with 90 minute battery operation for 1 or2 lamps with lumens from 950 to 1350 • • • • •
B50ST For 17W - 32W lamps with 90 minute battery operation for 1 or2 lamps with lumens from 950 to 1350. Ballast is self testing • • • • •
B60 For 17W - 32W lamps with 90 minute battery operation for 1 or2 lamps with lumens from 600-700 • • • • •
B70A For 17W - 32W lamps with 90 minute battery operation for 1lamp with lumens from 600-700 • • • • •
B90 For 17W - 32W lamps with 90 minute battery operation for 1lamp with lumens from 500-600 • • • • •
B100 For 17W - 32W lamps with 90 minute battery operation for 1lamp with lumens from 350-450 • • • • •
BLP550 For F54T5HO lamps with 90 minute battery operation for 1lamp with lumens of 700. Ballast can be used with T5
BDL600For F54T5HO lamps with 90 minute battery operation for 1lamp with lumens of 1250. Ballast can be used with T5
BDL500 For 17W - 32W lamps with 90 minute battery operation for 1 or2 lamps with lumens from 950-1350. Ballast rated damp location
ALPMHEG01ARRC Stainless steel mounting hanger snaps onto fiberglass housing of fixture
EQCLIPS Earthquake Clips - Lay-in troffer support clips
HHBS Forward facing trapeze hangers, 1 pair, for HEF Series
HHBS36Forward facing trapeze hangers, 1 pair with a pair of 36” jack chain forHEF Series
HHBS60Forward facing trapeze hangers, 1 pair with a pair of 60” jack chain forHEF Series
HSD Trapeze hangers, 1 pair, 1 for each end
HSD36 Trapeze hangers, 1 pair, 1 for each end with 1 pair of 36” jack chain
HSD60 Trapeze hangers, 1 pair, 1 for each end with 1 pair of 60” jack chain
MHHC STRIPHANG, Chain hanger and pair of 36” jack chain
MHICS ICS Bracket set, mounting hanger for ICS channel
MHTHC Mounting hanger for 4 3/16” channel
MHYTGB03BRKTSingle point bracket with pair of double Y toggle 3’long #2 gripple forquick installation, 4’ fixtures only
SC18 2, 3/8” diameter, 18”, white stem and canopy set • • • • • •
SC24 2, 3/8” diameter, 24”, white stem and canopy set • • • • • •
SC36 2, 3/8” diameter, 36”, white stem and canopy set • • • • • •
THSD Tong hanger for pendant mounting, 1.125 KO in center
THSD2SK Tong hanger for pendant mounting, 1.125 KO in center with pair ofside plates to close hanger off
THSD2HB Tong hanger for pendant mounting, 3/4” diameter center hub with pairof side plates to close hanger off
ALPDGA22 2 x 2 Grid adapters are used to install grid trimmed troffers in plasterboard or other hard ceilings
ALPDGA14 1 x 4 Grid adapters are used to install grid trimmed troffers in plasterboard or other hard ceilings
ALPDGA242 x 4 Grid adapters are used to install grid trimmed troffers in plasterboard or other hard ceilings
WGS044 Wireguard, 1 per 4’ or 2 per 8’ fixture
WGS054 Wireguard, 1 per 4’ or 2 per 8’ fixture
EMER
GEN
CY B
ALL
AST
SM
OU
NTI
NG
OPT
ION
S
FOR
PEN
DA
NT
MO
UN
TIN
GTO
NG
HA
NG
ERS
TRA
PEZE
HA
NG
ERS
GRI
D AD
APTO
RSFO
RHS
MFO
RHS
N
DRY
WA
LL G
RID
AD
APT
ORS
WIR
EGUA
RD
| INDOOR | FLUORESCENT | Options and Accessories | Industrials www.holophane.com72
FLUORESCENT
Options and Accessories
Industrials
Catalog # Description HSN HSM HIS IC TN CC IW IT
CP1S NEMA 5-15P - 18/3 6ft, white SJTOW cord set • • • • • • • •CP1SB NEMA 5-15P - 18/3 6ft, black SJTOW cord set • • • • • • • •CP1SL08 NEMA 5-15P - 18/3 8ft, white SJTOW cord set • • • • • • • •CP1SBL08 NEMA 5-15P - 18/3 8ft, black SJTOW cord set • • • • • • • •CP1SL10 NEMA 5-15P - 18/3 10ft, white SJTOW cord set • • • • • • • •CP1SBL10 NEMA 5-15P - 18/3 10ft, black SJTOW cord set • • • • • • • •CP1T NEMA L7-15P - 18/3 6ft, white SJTOW cord set • • • • • • • •
CP1TB NEMA L7-15P - 18/3 6ft, black SJTOW cord set • • • • • • • •CP1TL08 NEMA L7-15P - 18/3 8ft , white SJTOW cord set • • • • • • • •
CP1TBL08 NEMA L7-15P - 18/3 8ft, black SJTOW cord set • • • • • • • •
CP1TL10 NEMA L7-15P - 18/3 10ft, white SJTOW cord set • • • • • • • •
CP1TBL10 NEMA L7-15P - 18/3 10ft, black SJTOW cord set • • • • • • • •CP2T NEMA L24-20P - 16/3 6ft, white SJTOW cord set • • • • • • • •CP2TL08 NEMA L24-20P - 16/3 8ft, white SJTOW cord set • • • • • • • •CP2TL10 NEMA L24-20P - 16/3 10ft, white SJTOW cord set • • • • • • • •CP2T NEMA L8-20P - 16/3 6ft, white SJTOW cord set •1 •1 •1 • •1 •1
CP2TL08 NEMA L8-20P - 16/3 8ft, white SJTOW cord set •1 •1 •1 • •1 •1
CP2TL10 NEMA L8-20P - 16/3 10ft, white SJTOW cord set •1 •1 •1 • •1 •1
HF120SC16/2G03 3’ Holoflex drop, 16 gauge • • • • • • • •HF120SC16/2G05 5’ Holoflex drop, 16 gauge • • • • • • • •HF120SC16/2G10 10’ Holoflex drop, 16 gauge • • • • • • • •HF277SC16/2G03 3’ Holoflex drop, 16 gauge • • • • • • • •HF277SC16/2G05 5’ Holoflex drop, 16 gauge • • • • • • • •HF277SC16/2G10 10’ Holoflex drop, 16 gauge • • • • • • • •PLR1G 4’ or 8’ Plug-in plus ground lead, ballast connected to black • • • • • • •PLR2AG 4’ or 8’ Plug-in plus ground lead, ballast connected to black • • • • • • •PLR2ABG 4’ or 8’ Plug-in plus ground lead, ballast connected to black • • • • • • •PW1236 Flexible conduit 6’ with 12 gauge 2 wire and ground • • • • • • • •PW1238 Flexible conduit 8’ with 12 gauge 2 wire and ground • • • • • • • •
PW12310 Flexible conduit 10’ with 12 gauge 2 wire and ground • • • • • • • •
PW1246 Flexible conduit 6’ with 12 gauge 3 wire and ground • • • • • • • •PW1248 Flexible conduit 8’ with 12 gauge 3 wire and ground • • • • • • • •PW12410 Flexible conduit 10’ with 12 gauge 3 wire and ground • • • • • • • •PWS1836 Flexible conduit 6’ with 18 gauge 2 wire and ground • • • • • • • •GLR Fast-blow, internal fuse • • • • • • • •GMF Slow-blow, internal fuse • • • • • • • •
CORD
& P
LUG
277V
TW
IST
OFF
PLU
G
HO
LOFL
EX II
INTE
RNA
LPL
UG
-INW
IRIN
G
120V
STR
AIG
HT
MO
LDED
PLU
G34
7V T
WIS
TO
FF P
LUG
480V
TW
IST
OFF
PLU
G12
0V2
WIR
E27
7V2
WIR
E1
CIRC
UIT
2 CI
RCUI
T
FUSIN
G
SLOW
BLOW
FAST
BLOW
FLEX
IBLE
CO
ND
UIT
1 Available with T5HO only
HO
LOPHAN
E®
73
OPTIO
NS
AN
DA
CCESSORIES
Industrials
Catalog # Description HSN HSM HIS IC TN CC IW IT
B50 For 17W - 32W lamps with 90 minute battery operation for 1 or2 lamps with lumens from 950 to 1350 •1 •1 • •1 •1 • •1
B50ST For 17W - 32W lamps with 90 minute battery operation for 1 or2 lamps with lumens from 950 to 1350. Ballast is self testing •1 •1 • •1 •1 • •1
B60 For 17W - 32W lamps with 90 minute battery operation for 1 or2 lamps with lumens from 600-700 •1 •1 • •1 •1 • •1
B70A For 17W - 32W lamps with 90 minute battery operation for 1lamp with lumens from 600-700 •1 •1 • •1 •1 • •1
B90 For 17W - 32W lamps with 90 minute battery operation for 1lamp with lumens from 500-600 •1 •1 • •1 •1 • •1
B100 For 17W - 32W lamps with 90 minute battery operation for 1lamp with lumens from 350-450 •1 •1 • •1 •1 • •1
BLP550 For F54T5HO lamps with 90 minute battery operation for 1lamp with lumens of 700. Ballast can be used with T5 •2 •2 •2 • •2 •2
BDL600For F54T5HO lamps with 90 minute battery operation for 1lamp with lumens of 1250. Ballast can be used with T5 •2 •2 •2 • •2 •2
BDL500 For 17W - 32W lamps with 90 minute battery operation for 1 or2 lamps with lumens from 950-1350. Ballast rated damp location
ALPMHEG01ARRC Stainless steel mounting hanger snaps onto fiberglass housing of fixture
EQCLIPS Earthquake Clips - Lay-in troffer support clips
HHBS Forward facing trapeze hangers, 1 pair, for HEF Series
HHBS36Forward facing trapeze hangers, 1 pair with a pair of 36” jack chain forHEF Series
HHBS60Forward facing trapeze hangers, 1 pair with a pair of 60” jack chain forHEF Series
HSD Trapeze hangers, 1 pair, 1 for each end
HSD36 Trapeze hangers, 1 pair, 1 for each end with 1 pair of 36” jack chain
HSD60 Trapeze hangers, 1 pair, 1 for each end with 1 pair of 60” jack chain
MHHC STRIPHANG, Chain hanger and pair of 36” jack chain • • • • •
MHICS ICS Bracket set, mounting hanger for ICS channel •
MHTHC Mounting hanger for 4 3/16” channel •
MHYTGB03BRKTSingle point bracket with pair of double Y toggle 3’long #2 gripple forquick installation, 4’ fixtures only
SC18 2, 3/8” diameter, 18”, white stem and canopy set • •
SC24 2, 3/8” diameter, 24”, white stem and canopy set • •
SC36 2, 3/8” diameter, 36”, white stem and canopy set • •
THSD Tong hanger for pendant mounting, 1.125 KO in center
THSD2SK Tong hanger for pendant mounting, 1.125 KO in center with pair ofside plates to close hanger off
THSD2HB Tong hanger for pendant mounting, 3/4” diameter center hub with pairof side plates to close hanger off
ALPDGA22 2 x 2 Grid adapters are used to install grid trimmed troffers in plasterboard or other hard ceilings
ALPDGA14 1 x 4 Grid adapters are used to install grid trimmed troffers in plasterboard or other hard ceilings
ALPDGA242 x 4 Grid adapters are used to install grid trimmed troffers in plasterboard or other hard ceilings
WGS044 Wireguard, 1 per 4’ or 2 per 8’ fixture
WGS054 Wireguard, 1 per 4’ or 2 per 8’ fixture
EMER
GEN
CY B
ALL
AST
SM
OU
NTI
NG
OPT
ION
S
FOR
PEN
DA
NT
MO
UN
TIN
GTO
NG
HA
NG
ERS
TRA
PEZE
HA
NG
ERS
GRI
D AD
APTO
RSFO
RHS
MFO
RHS
N
DRY
WA
LL G
RID
AD
APT
ORS
WIR
EGUA
RD
1 Available with T8 only2 Available with T5HO only
FLUORESCENT
Options and Accessories
| INDOOR | FLUORESCENT | Options and Accessories | Strips and Specialty www.holophane.com74
Strips Specialty
Catalog # Description HSN HSM HIS TN DD EM EN HES TA HEF
CP1S NEMA 5-15P - 18/3 6ft, white SJTOW cord set • • • • • •CP1SB NEMA 5-15P - 18/3 6ft, black SJTOW cord set • • • • • •CP1SL08 NEMA 5-15P - 18/3 8ft, white SJTOW cord set • • • • • •CP1SBL08 NEMA 5-15P - 18/3 8ft, black SJTOW cord set • • • • • •CP1SL10 NEMA 5-15P - 18/3 10ft, white SJTOW cord set • • • • • •CP1SBL10 NEMA 5-15P - 18/3 10ft, black SJTOW cord set • • • • • •CP1T NEMA L7-15P - 18/3 6ft, white SJTOW cord set • • • • • •
CP1TB NEMA L7-15P - 18/3 6ft, black SJTOW cord set • • • • • •CP1TL08 NEMA L7-15P - 18/3 8ft , white SJTOW cord set • • • • • •
CP1TBL08 NEMA L7-15P - 18/3 8ft, black SJTOW cord set • • • • • •
CP1TL10 NEMA L7-15P - 18/3 10ft, white SJTOW cord set • • • • • •
CP1TBL10 NEMA L7-15P - 18/3 10ft, black SJTOW cord set • • • • • •CP2T NEMA L24-20P - 16/3 6ft, white SJTOW cord set • • • • • •CP2TL08 NEMA L24-20P - 16/3 8ft, white SJTOW cord set • • • • • •CP2TL10 NEMA L24-20P - 16/3 10ft, white SJTOW cord set • • • • • •CP2T NEMA L8-20P - 16/3 6ft, white SJTOW cord set •1 •1 • •CP2TL08 NEMA L8-20P - 16/3 8ft, white SJTOW cord set •1 •1 • •CP2TL10 NEMA L8-20P - 16/3 10ft, white SJTOW cord set •1 •1 • •HF120SC16/2G03 3’ Holoflex drop, 16 gauge • • • • • •HF120SC16/2G05 5’ Holoflex drop, 16 gauge • • • • • •HF120SC16/2G10 10’ Holoflex drop, 16 gauge • • • • • •HF277SC16/2G03 3’ Holoflex drop, 16 gauge • • • • • •HF277SC16/2G05 5’ Holoflex drop, 16 gauge • • • • • •HF277SC16/2G10 10’ Holoflex drop, 16 gauge • • • • • •PLR1G 4’ or 8’ Plug-in plus ground lead, ballast connected to black • • • •PLR2AG 4’ or 8’ Plug-in plus ground lead, ballast connected to black • • • •PLR2ABG 4’ or 8’ Plug-in plus ground lead, ballast connected to black • • • •PW1236 Flexible conduit 6’ with 12 gauge 2 wire and ground • • • • • • •PW1238 Flexible conduit 8’ with 12 gauge 2 wire and ground • • • • • • •
PW12310 Flexible conduit 10’ with 12 gauge 2 wire and ground • • • • • • •
PW1246 Flexible conduit 6’ with 12 gauge 3 wire and ground • • • • • • •PW1248 Flexible conduit 8’ with 12 gauge 3 wire and ground • • • • • • •PW12410 Flexible conduit 10’ with 12 gauge 3 wire and ground • • • • • • •PWS1836 Flexible conduit 6’ with 18 gauge 2 wire and ground • • • • • • •GLR Fast-blow, internal fuse • • • • • • • • • •GMF Slow-blow, internal fuse • • • • • • • • • •
CORD
& P
LUG
277V
TW
IST
OFF
PLU
G
HO
LOFL
EX II
INTE
RNA
LPL
UG
-INW
IRIN
G
120V
STR
AIG
HT
MO
LDED
PLU
G34
7V T
WIS
TO
FF P
LUG
480V
TW
IST
OFF
PLU
G12
0V2
WIR
E27
7V2
WIR
E1
CIRC
UIT
2 CI
RCUI
T
FUSIN
G
SLOW
BLOW
FAST
BLOW
FLEX
IBLE
CO
ND
UIT
1 Available with T5HO only
HO
LOPHAN
E®
75
OPTIO
NS
AN
DA
CCESSORIES
Strips Specialty
Catalog # Description HSN HSM HIS TN DD EM EN HES TA HEF
B50 For 17W - 32W lamps with 90 minute battery operation for 1 or2 lamps with lumens from 950 to 1350 •1 •1 • •
B50ST For 17W - 32W lamps with 90 minute battery operation for 1 or2 lamps with lumens from 950 to 1350. Ballast is self testing •1 •1 • •
B60 For 17W - 32W lamps with 90 minute battery operation for 1 or2 lamps with lumens from 600-700 •1 •1 • •
B70A For 17W - 32W lamps with 90 minute battery operation for 1lamp with lumens from 600-700 •1 •1 • •
B90 For 17W - 32W lamps with 90 minute battery operation for 1lamp with lumens from 500-600 •1 •1 • •
B100 For 17W - 32W lamps with 90 minute battery operation for 1lamp with lumens from 350-450 •1 •1 • •
BLP550 For F54T5HO lamps with 90 minute battery operation for 1lamp with lumens of 700. Ballast can be used with T5 •2 •2 •
BDL600For F54T5HO lamps with 90 minute battery operation for 1lamp with lumens of 1250. Ballast can be used with T5 •2 •2 •
BDL500 For 17W - 32W lamps with 90 minute battery operation for 1 or2 lamps with lumens from 950-1350. Ballast rated damp location • • •
ALPMHEG01ARRC Stainless steel mounting hanger snaps onto fiberglass housing of fixture •
EQCLIPS Earthquake Clips - Lay-in troffer support clips
HHBS Forward facing trapeze hangers, 1 pair, for HEF Series •
HHBS36Forward facing trapeze hangers, 1 pair with a pair of 36” jack chain forHEF Series •
HHBS60Forward facing trapeze hangers, 1 pair with a pair of 60” jack chain forHEF Series •
HSD Trapeze hangers, 1 pair, 1 for each end
HSD36 Trapeze hangers, 1 pair, 1 for each end with 1 pair of 36” jack chain
HSD60 Trapeze hangers, 1 pair, 1 for each end with 1 pair of 60” jack chain
MHHC STRIPHANG, Chain hanger and pair of 36” jack chain • • •
MHICS ICS Bracket set, mounting hanger for ICS channel
MHTHC Mounting hanger for 4 3/16” channel •
MHYTGB03BRKTSingle point bracket with pair of double Y toggle 3’long #2 gripple forquick installation, 4’ fixtures only •
SC18 2, 3/8” diameter, 18”, white stem and canopy set
SC24 2, 3/8” diameter, 24”, white stem and canopy set
SC36 2, 3/8” diameter, 36”, white stem and canopy set
THSD Tong hanger for pendant mounting, 1.125 KO in center
THSD2SK Tong hanger for pendant mounting, 1.125 KO in center with pair ofside plates to close hanger off
THSD2HB Tong hanger for pendant mounting, 3/4” diameter center hub with pairof side plates to close hanger off
ALPDGA22 2 x 2 Grid adapters are used to install grid trimmed troffers in plasterboard or other hard ceilings
ALPDGA14 1 x 4 Grid adapters are used to install grid trimmed troffers in plasterboard or other hard ceilings
ALPDGA242 x 4 Grid adapters are used to install grid trimmed troffers in plasterboard or other hard ceilings
WGS044 Wireguard, 1 per 4’ or 2 per 8’ fixture •
WGS054 Wireguard, 1 per 4’ or 2 per 8’ fixture
EMER
GEN
CY B
ALL
AST
SM
OU
NTI
NG
OPT
ION
S
FOR
PEN
DA
NT
MO
UN
TIN
GTO
NG
HA
NG
ERS
TRA
PEZE
HA
NG
ERS
GRI
D AD
APTO
RSFO
RHS
MFO
RHS
N
DRY
WA
LL G
RID
AD
APT
ORS
WIR
EGUA
RD
1 Available with T8 only2 Available with T5HO only
76
OPTIONS AND ACCESSORIES
Cord Set Options
CP | CX
Available in straight blade (non-locking) or twist-on (locking) cord sets and will work with vir-tually any luminaire series. Luminaire voltage must be specified even if multi-voltage ballastare used.
FEATURES:• SJTOW
-Up to 300V -Flammability: VW-1 (UL), FT1 (CSA)-Max. temperature rating: 105ºC dry, 60ºC wet-Oil and water resistant, thermoplastic jacket
• STOW-Up to 600V -Flammability: VW-1 (UL), FT1 (CSA)-Max. temperature rating: 105ºC dry, 60ºC wet-Oil and water resistant, thermoplastic jacket
Example: CP 1 T 6 (blank) (blank) B L10
How to Construct a Catalog Number:
| INDOOR | FLUORESCENT | Options and Accessories | Cord Set Options www.holophane.com
(blank)1 No plug1 15A2 20A3 30A1 Available with “CX” only
CP1
CORDSET TYPE
12
PLUG AMPACITY
CP | Cord with plug
CP Cord with plugCX Cord only
(blank) 18 Gauge for 15A16 Gauge for 20, 30A
61 16 Gauge4 14 Gauge2 12 Gauge1 Only specify if using for 12--277V;
standard on 347-480V
64
CONDUCTOR GAUGE
(blank) 3 conductor(2 wire + ground)
F1 4 conductor(16 gauge is standard)
1 Available with “CX” only
(blank)5
CONDUCTOR QUANTITY
(blank)1 No plugT Twist-offS Straight, non locking1 Available with “CX” only
T3
PLUG BLADE TYPE
Drawings, dimensions and specificationssubject to change.
Not all options may meet local code.Consult factory for assistance.
NEMA Straight Blade Configurations
CatalogDesignation Ampacity Voltage NEMA
Configuration Illustration
CP1S(120 Volt Fixtures)
15A120V
(L, N, G)5 - 15
(L, N, G)
5 - 15P 5 - 15R
CP1S(277 Volt Fixtures)
15A277V
(L, N, G)7 - 15
(L, N, G)
7 - 15P 7 - 15RPlug Receptacle
Plug Receptacle
77
HOLOPHANE®
FLUORESCENT
OPTIONS ANDACCESSORIES
Cord SetOptions
(blank) 120-277V, SJTOW standard347-480V, STOW standard
H STOW for 120-277V
(blank)6
CORD TYPE
(blank) 6’ StandardL10 10’LXX1 X= Length in feet1 Longer lead times for lengths other than
6’ and 8’
L106
LENGTH
(blank) WhiteB Black
B7
COLOR
NEMA Locking Configurations
CatalogDesignation Ampacity Voltage NEMA
Configuration Illustration
CP1T 15A120V
(L, N, G)L5 - 15(L, N, G)
L5 - 15P L5 - 15R
CP1T 15A208V, 240V(L1, L2, G)
L6 - 15(L1, L2, G)
L6 - 15P L6 - 15R
CP1T 15A277V
(L, N, G)L7 - 15(L, N, G)
L7 - 15P L7 - 15R
CP2T 20A120V
(L, N, G)L5 - 20(L, N, G)
L5 - 20P L5 - 20R
CP2T 20A208V, 240V(L1, L2, G)
L6 - 20(L1, L2, G)
L6 - 20P L6 - 20R
CP2T 20A277V
(L, N, G)L7 - 20(L, N, G)
L7 - 20P L7 - 20R
CP2T 20A347V
(L, N, G)L24 - 20(L, N, G)
L24 - 20P L24 - 20R
CP2T 20A480V
(L1, L2, G)L8 - 20
(L1, L2, G)
L8 - 20P L8 - 20R
Plug Receptacle
Plug Receptacle
Plug Receptacle
Plug Receptacle
Plug Receptacle
Plug Receptacle
Plug Receptacle
Plug Receptacle
78
OPTIONS AND ACCESSORIES
Motion Sensor Options
SNS | SNR | SNA | SNB | SNC | SNN
Motion Sensors are highly effective tools for lowering energy consumption by reducing thehours of operation when the space is unoccupied and/or adequately illuminated by daylight.
FEATURES:• Low voltage relays can be factory installed - allow maximum flexibility when
using remote sensors• Voltage specific option - fixture voltage must be specified when ordering• Some or all lamps can be controlled by the sensor, offering a range of
illuminance control• Sensors can be factory installed in some luminaires, otherwise field mounted by
installer
Example: SNS
How to Construct a Catalog Number:
| INDOOR | FLUORESCENT | Options and Accessories | Motion Sensor Options www.holophane.com
SNS1
SENSING COVERAGE
(blank) | Internal Sensor 1
SNS1 360º SensingSNR2 360º SensingSNA Aisle single wedgeSNB Aisle double wedgeSNC Low aisle double wedgeSNN No sensing head1 For mounting height above 25’2 For mounting height below 25’
(blank) No variationD1 Dual technologyC Integral photocell
override option1 PIR & Ultrasonic, for low bay
mounting
C3
VARIATION
(blank) Line voltage, same as ballastL Low voltage, 24VDC
L4
CONTROL VOLTAGE
(blank)1 Complete sensorH Sensor control module, headB2 Sensor power module, baseR2 Relay/power pack1 Head and base2 Available only with “SNN”
H2
TYPE
E | External Sensor 1
Drawings, dimensions and specificationssubject to change.
1 Not all luminaire options are available with sensors – consult factory.
79
HOLOPHANE®
FLUORESCENT
OPTIONS ANDACCESSORIES
Motion SensorOptions
Internal Sensor
External Sensor
(blank)1 InternalH ExternalP1, 2 InternalT2 External1 Available only with “HB”,
“HC” and “HAF” Series2 Perpendicular to lamps
H5
MOUNTING
(blank) Normal, 0ºCQ Low, -20ºC1 Available only with mounting “E”
Q7
TEMP RATING
(blank) Plant standardS Sensor switchW Watt stopper
S8
MANUFACTURER
(blank) All ballast wired to sensorZ1 Night-light wiring1 One ballast (in-board lamps)
always on
Z6
WIRING
TOP VIEWSensing Coverage
SIDE VIEWSensing Coverage
SNS
34 27 20 12 200
27
20
12
0
34342712
34 27 20 12 20120
30
20
10
0
403427
Typical mounting height: 20-45’
Optimal coverage: 68’ diameter at40’ height
Application: High bay, open area
SNR
15 10 5 0 15105
5
0
5
10
1012 9 6 3 630
15
10
5
0
20129
Typical mounting height: 10-30’
Optimal coverage: 24’ diameter at20’ height
Application: Low bay, open area
SNA
30 20 10 0 2010 30
20
10
0
40
10
2040 30 20 10 0 302010
30
20
10
0
40
Typical mounting height: 20-45’
Optimal coverage: 68’ diameter at40’ height
Application: High bay, open area
SNB
30 20 10 0 2010 30
20
10
0
40
10
2040 30 20 10 0 302010
30
20
10
0
40
Typical mounting height: 20-40’
Optimal coverage: 60’ linear x 20’width
Application: High bay, open area
SNC
302030 20 10 0 10
10
0
3510
35 302030 20 10 0 10
10
0
3510
35
Typical mounting height: 8’
Optimal coverage: 68’ linear x 20’width
Application: Conveyors
80
OPTIONS AND ACCESSORIES
Steel Cable Hangers
MH
Industrial steel cable hangers are extremely quick and easy to install. One of the greatbenefits of the system is the speed and flexibility of installation.
FEATURES:• Galvanized steel cables provided in kits, two cables per kit• Each cable includes one adjustable steel yoke to form a mounting loop• No special tools or skills required for installation• Self locking zinc housing• Versatile and quick mounting saves installation time
Example: MH LP B 10
How to Construct a Catalog Number:
| INDOOR | FLUORESCENT | Options and Accessories | Steel Cable Hangers www.holophane.com
MH1
CABLE
LP2
END TYPE
LP | Loop End
MH Cable Hanger 10 10’30 30’
104
LENGTH
B 5/64” approximate
B3
SIZE
TG | Single Toggle YTG | Two Toggles
LP Loop endTG Single toggleYTG Two toggles, 18” legs
See detail “2”
See detail “1”
See detail “2”
Double loop withone loop adjustable
MHLP1
Detail “1”Swedged
connection
Detail “2”Adjustable yoke
connection
Detail “3”Toggle
connector
Detail “4”Swedged
connection
Single adjustableloop with toggle
MHTG1
Single adjustable loopY with double toggle
MHYTG1
See detail “2”
See detail “4”
See detail “3” See detail “3”
Drawings, dimensions and specificationssubject to change.
Custom versions available – contact factory.
1 Check pages 78-85 for luminaire specific compatibility.
PricesAll prices are subject to change without notice and are F.O.B.shipping point. Pricing does not include lamps unless so spec-ified.
Acceptance of Orders No order placed with Holophane shall be considered accept-ed until officially acknowledged in writing by Holophane. Theterms and conditions stated in Holophane’s written orderacknowledgement shall constitute the entire sales agree-ment between Holophane and the purchaser, and any con-trary or additional terms or conditions submitted by the pur-chaser shall be deemed to be of no effect unless specificallyacknowledged in writing by Holophane at the time of orderacceptance. No custom, practice, or course of prior dealingsbetween the parties and no usage of trade shall modify orotherwise affect the terms and conditions of Holophane’swritten order acknowledgement Holophane reserves theright to select its own customers and to reject any order. Allorders and shipments are subject to the approval ofHolophane’s Credit Department.
Terms of Payment Invoices dated from the 11th through the 25th of the monthare due net on the 10th of the following month. Invoicesdated from the 26th through the 10th of the followingmonth are due net on the 25th of the same month.
A service charge of 1 1/2% per month (or if such rateexceeds the maximum lawful rate, then such maximum law-ful rate) shall be assessed on all past due payments and shallbe payable on demand.
Freight FREIGHT IS PREPAID AND ALLOWED ON ALL SHIPMENTS OFPRODUCTS FOR ORDERS OVER $1,500.00 TO ALL POINTSIN THE CONTINENTAL UNITED STATES AND CANADA. Allfreight charges are the responsibility of the purchaser.Holophane reserves the right to use its discretion in routingall shipments; however, special instructions will be followedif the purchaser will assume any additional transportationcharges. Cartage or accessorial charges and detention ordemurrage charges are not allowed.
All goods are shipped F.O.B. shipping point at the purchaser’srisk. Holophane’s responsibility for safe delivery ceases whenthe goods have been turned over to the transportation com-pany. All claims for damage or shortage in transit are to behandled by the purchaser. Shipments should be inspected bythe purchaser immediately upon receipt for transportationloss or damage and any necessary claim entered promptlywith the carrier.
Delivery Holophane shall not be liable for any delay or default in deliv-ering products where occasioned by any cause of any kind orextent beyond the control of Holophane, including withoutlimitation armed conflict or economic dislocation resultingthere from embargoes; shortages of labor, raw materials,fuel, energy, production facilities or transportation; labor dif-ficulties; civil disorders of any kind; action of civil or militaryauthorities (including priorities and allocations); fires; floods;and accidents. No liability shall be sustained by Holophane byreason of its not filling any order or portion thereof due toany of these or similar occurrences.
Packing No charge will be made for domestic packing. Some prod-ucts are shipped palletized for the purchaser’s convenience.Where it is impractical for the purchaser to handle heavy pal-lets, the purchaser should specify “No Pallet” on the order.
Taxes The purchaser shall pay when due all sales, use, grossreceipts, excise and other taxes (together with interest andpenalties if any, thereon) now or hereafter imposed by anygovernmental agency upon Holophane, the purchaser, theproducts or the use thereof.
Proper Product Application Products should be stored, installed, used and maintained inaccordance with applicable Holophane instructions andspecifications. Copies of instructions and specifications canbe obtained from: Holophane Customer ServiceDepartment, PO Box 3004, Newark, Ohio 43055.Holophane is not responsible, under its limited warrantydescribed below or otherwise, for any product modified oraltered without prior written authorization from Holophane.
Limited WarrantySubject to all limitations set forth below, Holophane warrantsto the purchaser that Holophane products will be free fromdefects in material and workmanship for two (2) years fromthe date of manufacture.
Notwithstanding the preceding paragraphs, Holophanemakes no warranties regarding lamps and fluorescent bal-lasts. All lamps and fluorescent ballasts, purchased andshipped by Holophane are subject to the applicable warran-ty (if any) of the company that manufactures such products.For purposes of this limited warranty, the term “purchaser”means a purchaser for resale or for use in business.Holophane makes no warranties to those defined as con-sumers in the Magnuson-Moss Federal Trade CommissionImprovement Act.
If any of Holophane’s products fail to meet the applicablewarranty described above Holophane shall correct the defectby shipping to the purchaser either (at Holophane’s option)the necessary repaired or replacement parts F.O.B.Holophane factory with freight allowed to destination with-in the Continental United States, Alaska, and Hawaii; provid-ed that the purchaser promptly gives Holophane writtennotice of any product defect within thirty (30) days after dis-covery of the defect and, if requested by Holophane,promptly arranges to make the product available toHolophane for investigation and correction NO PRODUCTSMAY BE RETURNED UNTIL THE PURCHASER HAS CONTACT-ED HOLOPHANE AND RECEIVED A RETURN AUTHORIZA-TION. The warranty set forth in this section is VOID IF theproducts have not been properly stored, installed, used ormaintained or if the purchaser fails to comply with any appli-cable recommendations of Holophane. Holophane shall notbe responsible for any failure of its products which is a resultof external causes; natural catastrophe; power surges or fail-ure; improper power supply; fault or negligence of the pur-chaser or user; improper or unauthorized use, installation,handling, storage, alteration or service; or any cause otherthan a defect in the material or workmanship of the productitself.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OFALL OTHER WARRANTIES. EXCEPT AS SPECIFICALLY SETFORTH ABOVE, HOLOPHANE MAKES NO REPRESENTA-TIONS OR WARRANTIES, AND EXPRESSLY DISCLAIMS ALLREPRESENTATIONS AND WARRANTIES, EXPRESS ORIMPLIED, RELATING DIRECTLY OR INDIRECTLY TO ANYPRODUCTS MANUFACTURED OR SOLD BY HOLOPHANE,WHETHER ORAL, WRITTEN, OR ARISING BY COURSE OFDEALING OR USAGE OF TRADE INCLUDING WITHOUT LIM-ITATION ANY WARRANTIES OF MERCHANTABILITY OR FIT-NESS FOR A PARTICULAR PURPOSE. THIS LIMITED WARRAN-TY MAY BE MODIFIED OR AMENDED ONLY BY A WRITTENINSTRUMENT SIGNED BY A DULY AUTHORIZED REPRESEN-TATIVE OF HOLOPHANE. WITHOUT AN EXPRESS, WRITTENAUTHORIZATION FROM HOLOPHANE, NO DISTRIBUTOR ORSUPPLIER OF HOLOPHANE PRODUCTS HAS THE AUTHORI-TY TO MODIFY OR AMEND THIS LIMITED WARRANTY
Limitation of Liability The foregoing limited warranty provides the purchaser’s soleand exclusive remedy relating to Holophane’s products. Thetotal liability of Holophane on any and all claims of any kind,whether in contract, warranty, tort (including negligence),strict liability or otherwise, arising out of or in connectionwith, or resulting from, Holophane performance or breach ofthe foregoing limited warranty or from Holophane’s sale,delivery resale, repair, or replacement or use of any productsor the furnishing of any services, shall in no event exceed thepurchase price allocable to the specific product which gives
rise to the claim, and any and all such liability shall terminateupon the expiration of the limited warranty specified above.If Holophane furnishes advice or other assistance which con-cerns any product, or any system or equipment in which anyproduct may be installed, the furnishing of such advice orassistance shall not subject Holophane to any liability,whether in contract, warranty, tort (including negligence), orotherwise.
IN NO EVENT SHALL HOLOPHANE BE LIABLE FOR ANY INDI-RECT SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLA-RY, OR PUNITIVE DAMAGES, EVEN IF INFORMED OF THEPOSSIBILITY OF SUCH DAMAGES, WHETHER AS A RESULTOF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDINGNEGLIGENCE), STRICT LIABILITY OR ANY OTHER THEORY,INCLUDING WITHOUT LIMITATION LABOR CHARGES, LOSSOF TIME, PROFITS OR REVENUES, LACK OR LOSS OF PRO-DUCTIVITY, INTEREST CHARGES OR COST OF CAPITAL,COST OF SUBSTITUTE EQUIPMENT, SYSTEMS SERVICES ORPRODUCTS COST OF PURCHASED OR REPLACEMENTPOWER, DOWNTIME COSTS, DAMAGE TO OR LOSS OF USEOF PRODUCTS OR ANY RELATED EQUIPMENT, SYSTEM ORFACILITY, OR ANY PROPERTY TO WHICH ANY PRODUCT ISAFFIXED, OR ANY INCONVENIENCE ARISING OUT OF ANYBREACH OF THE FOREGOING LIMITED WARRANTY OROBLIGATIONS UNDER SUCH LIMITED WARRANTY
Holophane reserves the right to change or improve thedesign of any of its products without assuming any obliga-tion to modify any product previously manufactured.
Return GoodsRequests to return materials must be made within four (4)months from date of shipment. No products will be accept-ed for return unless in original packages and accompanied by“re turn authorization number” which can be obtained onlyfrom Holophane’s Customer Service Department, Newark,Ohio.
Return shipment must be made F.O.B. Holophane’s factory asspecified on Holophane’s return authorization form. Forproducts accepted for return, a credit will be issued at theprices prevailing at the time of shipment or at the time ofreturn, whichever is lower, from which will be deducted arefreight charges previously allowed, and a minimum servicecharge of 40% of the invoice price to cover part of the costof handling, unpacking, repacking and placing the productsin salable condition. The actual service charge will be deter-mined from the condition of the units as received atHolophane’s factory. Such charge is payable by the purchas-er on demand. Products specifically modified to customerrequirements are noncancelable after release and are nonre-turnable. Products returned for errors in shipments will beaccepted at full credit and without service charge.Transportation must be prepaid on all returned merchandise.
CancellationsIf the purchaser, after acceptance of an order by Holophane,desires to cancel the order, and Holophane accepts such can-cellation in writing, the cancellation charge shall be 10% ofthe total price of the order, or, if greater, the actual costsincurred by Holophane with respect to the order as of thetime of cancellation. Such charges are payable by the pur-chaser on demand.
Construction of AgreementsThese terms and conditions and all agreements betweenHolophane and the purchaser shall be governed by and con-strued in accordance with the laws of Ohio, including with-out limitation the Uniform Commercial Code as adopted inOhio. As used herein, the term “Holophane” shall meanHolophane, a division of National Service Industries, Inc., aGeorgia Corporation.
The prices and data in this schedule are for the convenienceof users, and every effort is made to avoid error, butHolophane cannot be held responsible for any errors oromissions.
FLUORESCENT
Terms and Conditions
S T R I P SW R A P S S P E C I A LT Y
HL-2130 11/06 ©2006 Acuity Lighting Group, Inc Printed in USA
Acuity Lighting Group, Inc.
214 Oakwood Ave., Newark, OH 43055 /Holophane Canada, Inc. 9040 Leslie Street, Suite208, Richmond Hill, ON L4B 3M4 / HolophaneEurope Limited, Bond Ave., Milton Keynes MK11JG, England / Holophane, S.A. de C.V.,Apartado Postal No. 986, Naucalpan de Juarez,53000 Edo. de Mexico
Contact your local Holophane factory salesrepresentative for application assistance, andcomputer-aided design and cost studies. Forinformation on other Holophane products andsystems, call the Inside Sales Service Departmentat 740-345-9631. In Canada call 905-707-5830 or fax 905-707-5695.
Limited Warranty and Limitation of LiabilityRefer to the Holophane limited material warran-ty and limitation of liability on this product,which are published in the “Terms andConditions” section of the current productdigest, and is available from your localHolophane factory sales representative.
Visit our web site at www.holophane.com
Luminaires may utilize fluorescent or high intensity discharge sources that containsmall amounts of mercury. New disposal labeling for these lamps includes themercury identifier shown on the right to indicate that the lamp contains mercuryand should be disposed of in accordance with local requirements.Information sources regarding lamp recycling and disposal are included on the packagingof most mercury-containing lamps and also can be located at www.lamprecycle.org.