Die plate size (mm) 400 x 300Heating power (W) 3000 Dimensions mm 870 x 1050 x 1830 Max Printing Speed (pcs/hr) 900 pcs/hrAir Consumption (Litre / Min) 142 (6 bar)Weight (Kg) 407Maximum Pressure (Kg) 2500Maximum Stamping Height (mm) 380

SPECIFICATIONS

H-400 Pneumatic Flat Hot Stamping Machine

SYD: 02 9663 3911MELB: 03 9465 0166ADEL: 08 8234 5466

NZ: Freecall 0800 883 911

With a huge die plate of 400 x 300mm and a stamping pressure to match (2500kg) the H-400can print onto even the toughest substratesincluding:

• Paper• Cardboard• Wood• Leather• Soft Plastics• Some hard plastics

Features Include: • Safety Guarding Type 1A simple lexan guard that surrounds the heater block with provision made for easy access to the die plate clamp. The front guard is electronically interlocked so that the machine cannot cycle unless the guard is properly closed. (not pictured)• Microprocessor control• Pneumatic cylinder driven• Adjustable stamping pressure, temperature and speed• Easily adjustable print position with x/y/r adjustments on work table• Automatic and adjustable foil feed and take-up• Adjustable stamping head height and cylinder stroke

NOTE: machines come standard with 2 hand switch operation but foot pedal control is an option that can also be speci�ed with the order.

Milford Astor have a wide range of foil grades and colours suitable for every application. With a state of the art design studio we are equipped to meet all your artwork and stamping die requirements.