PROGRAMMING PROCEDURE FOR MSC BASED WLL

FWT – AIRTONE – PROGRAMMING

#*0202MIN – CONFIRMPHONE NUMBER : ENTER CODE WITHOUT ZERO AND TEL. NO. – CONFIRMMDN – CONFIRMENTER “00” – CONFIRMMCC – CONFIRMENTER “404” – CONFIRMMNC – CONFIRMENTER “00” – CONFIRMCHANNEL - CONFIRMCDMA PRIMARY “A” – CONFIRMENTER “42” – CONFIRM …….. ( for ANANDAPURAM enter 83 as channel )CDMA PRIMARY “B” – CONFIRMENTER “0” – CONFIRMCDMA SECONDARY “A” – CONFIRMENTER “0” – CONFIRMCDMA SECONDARY “B”- CONFIRMENTER “0” – CONFIRMSID NID PAIRS – CONFIRMSID_NID1 - CONFIRM14495*65535 –CONFIRMSID_NID2 – CONFIRM0*0 – CONFIRMSID_NID3 – CONFIRM0*0 – CONFIRMSID_NID4 – CONFIRM0*0 – CONFIRMPRESS – END BUTTON

DE-BUGGING PROCEDURE

1. #*02032. Press “1” system para appears and Press “CONFIRM”. SID,FREQUENCY,PN

&NID will be displayed.3. Press “CANCEL” and select Signal Monitor, now RSS & Ec/I0 will be

displayed.

FWT – HUAWEI ( Model – 2288) – PROGRAMMING

MENU-SETTINGS – OK ADVANCED – OK

SYSTEM PARA –OKENTER SPC “000000” (ENTER SIX ZEROs) OK TMCC – ENTER “404” OK11 – 12 OKENTER “00” OKMS OKENTER CODE WITHOUT ZERO AND TELEPHONE NUMBER OKTMCC – OKENTER “404” OK11 – 12 OKENTER “00” OKTS OKENTER CODE WITHOUT ZERO AND TELEPHONE NUMBER OKCHANNEL OKCHANNEL ‘ENTER – 01” OKENTER “42” OK …… ( for ANANDAPURAM enter 83 as channel )LOCK OUT SID OKENTER ‘01” OKENTER “14495” OKLOCK OUT NID OKENTER “01” OKENTER “65535” OKHOME SID OKENTER “01” OKENTER “14495” OKHOME NID OKENTER ‘01” OK[‘/ENTER “65535” OK “A” KEY APPEARS

SCI - OK, 1 – OKH_SID TERM REG – OK , 1 - OK

PRESS 8 TIMES DOWN ARROW TILL “FINISH SETTINGS” OK

DE-BUGGING PROCEDURE

1. For Login ##10900*2. For Rx Power,PN & Ec / Io ##10200*3. For SID, NID, & Cid ##10100*.

FWT – LG – PROGRAMMING

MENU AND “0” (ZERO)SWRVICE CODE “000000” (SIX ZEROs)2 SELECT NAM #NAM1 OK5 SET SERVICEESN 8 BIT HEXANUMBER OKNAM1 NUMBER “CODE WITHOUT ZERO AND TELEPHONE NUMBER… OKBASIC NAM1 PROGRAMMING …… MORESERVICE CODE “000000” ( SIX ZEROs ) OKNAM1 MCC “404” OKNAM1 NM SID ’00 AND TELEPHONE NUMBER” OKNAM1 TRUE MCC INACTIVE OKNAM1 NM SID INACTIVE OKNAM1 CDMA CH1 “42” OK …… ( for ANANDAPURAM enter 83 as channel )NAM1 CDMA CH1 “0” OKNAM1 CDMA CH1 “0” OKNAM1 HOME SID “14495” OKNAM1HOME NID “65535” OKNAM1 HOME SYS “YES” OKNAM1 FORN SID “NO” OKNAM1 FORN NID “NO” OKNAM1 NAME OKNAM1 ACCOLC OKPHONE MODEL …. OKSLOT CYCLE INDEX …. OK

DE-BUGGING PROCEDURE

1. Press MENU , 0 & 0000002. Pess 4 & 1. Now TEST SCREEN will be dispayed.

FWT – HUAWEI ( Model – 2228) – PROGRAMMING

# # 412365 press save2nd option system test press select5th option nam prog press selectinput svc code 000000 press okesn okA-key okdir no 8952203xxxlock sid/lock nid 6 times 0000/00home sid/home nid 14495/65535prl enable no okrename nam ok2nd option continuemcc 404 oknmsid 008952203xxx oktrue imsi mcc 404 oktrue imsi nmsid 008952203xxx okprimary channel a 83 okprimary channel b oksecondary channel a 42 oksecondary channel b okthird channel a 0 okthird channel b 0 okhome reg yes okforeign sid no okforeign nid no okaoc oksci 1 oksaving…

MODIFICATIONS:--

Edit SCI:- 1

DE-BUGGING PROCEDURE FOR MODEL HUAWEI (Model – 2228) - PROGRAMMING

1. ##412365 OK2. Select “DEBUG”3. ON / OFF ON4. SET COMPLETED ON5. BACK KEY DE BUG Screen appears.

MODIFICATIONS:-10) Select SID/NID and enter SID and NID 20 times.17) Overload class : 9

Debugging of FWT ICOMM of HISENFE ACP-606 MODEL1.*2003#2.Debug

LG – LST 230 – FWT PROGRAMMING

##0000000#1#3#MIN*#4#404*#5#0*#6#14495#65535*#10#42*

--------------------

##0000000#1#23#2*#24#2*