Fundamental Concepts of Vibration-presentation

Dr. Millerjothi, BITS Pilani, Dubai Campus

Chapter:1 ▪ Brief review of fundamental concepts of vibration ▪ Vibration Analysis ▪ Analysis of Simple vibrating systems

✓Vibrations can lead to excessive deflections and failure on the machines and structures.

✓ To reduce vibration through proper design of machines and their mountings.

✓ To utilize profitably in several consumer and industrial applications.

✓ To improve the efficiency of certain machining, casting, forging & welding processes.

✓ To stimulate earthquakes for geological research and conduct studies in design of nuclear reactors.

Importance of the Study of Vibration

!✓Vibrational problems of prime movers due to

inherent unbalance in the engine. ✓Wheel of some locomotive rise more than

centimeter off the track – high speeds – due to imbalance.

✓ Turbines – vibration cause spectacular mechanical failure.

EXAMPLE OF PROBLEMS

DISADVANTAGES

!✓Cause rapid wear. ✓Create excessive noise. ✓ Leads to poor surface finish (eg: in metal

cutting process, vibration cause chatter). ✓Resonance – natural frequency of vibration of a

machine/structure coincide with the frequency of the external excitation (eg: Tacoma Narrow Bridge – 1948)

Applications

Basic Concepts of Vibration

❑ Vibration = any motion that repeats itself after an interval of time. !

❑ Vibratory System consists of: 1) spring or elasticity 2) mass or inertia 3) damper !!❑ Involves transfer of potential energy to kinetic energy and vice

versa.

❑ Degree of Freedom (d.o.f.) = min. no. of independent coordinates required to determine completely the positions of all parts of a system at any instant of time

❑ Examples of single degree-of-freedom systems:

❑ Examples of Two degree-of-freedom systems:

❑ Examples of Three degree of freedom systems:

❑ Example of Infinite number of degrees of freedom system: !!!

❑ Infinite number of degrees of freedom system are termed continuous or distributed systems.

❑ Finite number of degrees of freedom are termed discrete or lumped parameter systems.

❑ More accurate results obtained by increasing number of degrees of freedom.

Classification of vibration

❑ Free Vibration:A system is left to vibrate on its own after an initial disturbance and no external force acts on the system. E.g. simple pendulum

❑ Forced Vibration:A system that is subjected to a repeating external force. E.g. oscillation arises from diesel engines ➢Resonance occurs when the frequency of the external

force coincides with one of the natural frequencies of the system

❑ Undamped Vibration:When no energy is lost or dissipated in friction or other resistance during oscillations

❑ Damped Vibration: When any energy is lost or dissipated in friction or other resistance during oscillations

❑ Linear Vibration:When all basic components of a vibratory system, i.e. the spring, the mass and the damper behave linearly

Damped and Undamped vibrations

❑ Nonlinear Vibration:If any of the components behave nonlinearly

❑ Deterministic Vibration:If the value or magnitude of the excitation (force or motion) acting on a vibratory system is known at any given time

❑ Nondeterministic or random Vibration: When the value of the excitation at a given time cannot be predicted

❑ Examples of deterministic and random excitation:

Harmonic motion

❑ Periodic Motion: motion repeated after equal intervals of time

❑ Harmonic Motion: simplest type of periodic motion ❑ Displacement (x): !❑ Velocity: !

❑ Acceleration:

Ax 2sin=

)2/sin(cos πωωωω +=== tAtAdtdx

)(sinsin 222

πωωωω +=−== tAtAdtxd

xx 2ω−=!!

The similarity between cyclic (harmonic) and sinusoidal motion.

The trigonometric functions of sine and cosine are related to the exponential function by Euler’s equation.

exp(iθ) = cos(θ) + i sin(θ) The vector P rotating at constant angular Speed ω can be represented as !!!!Where x =real component and y = imaginery component.

Vibrations of several different frequencies exist simultaneously. Such vibrations result in a complex waveform which is repeated periodically as shown

A periodic function:

Harmonic Analysis

Fourier Series Expansion: If x(t) is a periodic function with periodic τ, its Fourier Series representation is given by

∑∞

)sincos(2

...2sinsin

...2coscos2

nnn tnbtna

tataatx

•Complex Fourier Series: The Fourier series can also be represented in terms of complex numbers.

titetite

ωωω

sincos

•Frequency Spectrum: Harmonics plotted as vertical lines on a diagram of amplitude (an and bn or dn and Φn) versus frequency (nω).

Even and odd functions:

∑∞

0 cos2

nn tna

Even function & its Fourier series expansion

Odd function & its Fourier series expansion

∑∞

−=−

nn tnbtx

Half-Range Expansions:

The function is extended to include the interval – τ to 0 as shown in the figure. The Fourier series expansions of x1(t) and x2(t) are known as half-‐range expansions.

Example 1Addition of Harmonic Motions

Find the sum of the two harmonic motions

Solution: Method 1: By using trigonometric relations:

Since the circular frequency is the same for both x1(t) and x2(t), we express the sum as

).2cos(15)( and cos10)(21

+== ttxttx ωω

E.1)()()()cos()(21txtxtAtx +=+= αω

That is, !!That is, !!By equating the corresponding coefficients of cosωt and sinωt

on both sides, we obtain

( )E.2)()2sinsin2cos(cos15cos10

)2cos(15cos10sinsincoscosttt

ttttAωωω

ωωαωαω

++=−

E.3)()2sin15(sin)2cos1510(cos)sin(sin)cos(cos

ttAtAtω

ωαωαω

( )1477.14

)2sin15(2cos1510

2sin15sin2cos1510cos

E.5)(5963.742cos1510

2sin15tan 1

+= −α

Method 2: By using complex number representation:: the two harmonic motions can be denoted in terms of complex numbers:

!!!!The sum of x1(t) and x2(t) can be expressed as

[ ] [ ][ ] [ ] E.7)(15ReRe)(

10ReRe)()2()2(

++ ≡=

≡=titi

eeAtxeeAtx

[ ] E.8)(Re)( )( αω += tiAetx

Example 2

where A and α can be determined using the following equations

!!!!!!and A = 14.1477 and α = 74.5963º

2,1;)( 22 =+= jbaA jjj

2,1;tan 1 =!!"

&= − j

Vibration Terminology

❑ Definitions of Terminology: ➢Amplitude (A) is the maximum displacement of a vibrating

body from its equilibrium position

➢Period of oscillation (T) is time taken to complete one cycle of motion !

➢Frequency of oscillation (f) is the no. of cycles per unit time

➢Natural frequency is the frequency which a system oscillates without external forces

➢Phase angle (φ) is the angular difference between two synchronous harmonic motions

( )φω

tAxtAx

sinsin

➢Beats are formed when two harmonic motions, with frequencies close to one another, are added

➢The peak value generally indicates the maximum stress that the vibrating part is undergoing.

➢The average value indicates a steady or static value. It is found from

!!For example, the average value of complete A sin t is zero, but

of a half cycle

➢The mean square value of a time function x(t) is found from average of the squared values, integrated over some time interval T

➢Decibel is originally defined as a ratio of electric powers. It is now often used as a notation of various quantities such as displacement, velocity, acceleration, pressure, and power

log20dB

log10dB

where P0 is some reference value of power and X0 is specified reference voltage.

Problem 3

Solution

Fundamental Concepts of Vibration-presentation

Documents

Transcript of Fundamental Concepts of Vibration-presentation

Fundamental Memory Concepts

Fundamental Spatial Concepts - University of California ...good/275/uiucdec06.pdf · Fundamental Spatial Concepts ... What fundamental concepts? ... – ability to use tools and technologies

Fundamental Economic concepts Chapter 1 C Fundamental ...

Part I Fundamental Concepts - University of California ... · Part I Fundamental Concepts. Spring 2006 Parallel Processing, Fundamental Concepts Slide 2 About This Presentation Edition

VHDL – Fundamental concepts

Fundamental Concepts - NCKU

01 Fundamental Concepts

Vibration monitoring and control of blasting associated ... Log APPENDIX C ... monitoring, and vibration analysis to become acquainted with both the fundamental concepts and terminology

Fundamental of Vibration

Part I- Fundamental Concepts

FUNDAMENTAL AND ADVANCED VIBRATION ANALYSIS

Week 1: Fundamental concepts in vibrationcontents.kocw.net/.../2014/Chungbuk/ShinEungSoo/1.pdf · Fundamentals of Vibrations •Definition of vibration time Motion •Displacement

1 Fundamental Concepts

Ch1-Fundamental of Vibration

Fundamental DB Concepts

Three Fundamental Concepts

Chap1 Fundamental Concepts

Chap03 Fundamental Economic Concepts

Radiation Fundamental Concepts

Fundamental Concepts - LearnInHub