Post on 06-Apr-2018
8/3/2019 FOS Series Checked
http://slidepdf.com/reader/full/fos-series-checked 1/5
FOS Series
FOS Series Fin Mills are the first choice of OEM and After Service heat exchanger
manufacturers worldwide. They are designed and built to be the most rugged, reliable,
precision producers of high efficiency heat transferring air way fins and turbulators available.
INNOVATION IN FIN PRODUCTION TECHNOLOGY
The FOS Series of Fin Mills includes
simple technology models for cost
effective low volume manufacturing and
high speed models utilizing advanced
technologies for the highest possible
statistical capabilities of every
operating specification and the highest
speed operating rates required by any
manufacturing systems.
All FOS Finmodels are built for years of
reliable production use in any
manufacturing environment.
Louvered, non-louvered, offset and side wavy designs can be
produced on a range of FOS series Fin Mills that can be suited for any
manufacturing application.
8/3/2019 FOS Series Checked
http://slidepdf.com/reader/full/fos-series-checked 2/5
FOS STANDARDIZED COMPONENTS AND TOOLING
All FOS Fin Mills share a variety of
common components and assemblies.FOS form roll tooling and tooling stands
can be used on any FOS model, from
the FOS-Mini to the FOS-150 highest
speed model. Other standard
components are common among many
models.
LONG LIFE FIN ROOLL TOOLING
Fin Rolls from Creads are the longest life, highest
precision fin rolls in the world. Creads rolls are
unmatched for fin forming precision of height,
louver length and configuration, fin density and fin
shape. Available in conventional radius
convolution, “flat top” (“square wave”) and offset
and lanced-offset fin designs.
EASE OF OPERATION AND CHANGEOVER
All FOS Fin Mills are designed for ease of
set-up, adjustment and operation.
Operators of any skill level can easily
maintain and operate all FOS fin mills.
Maintenance staff of all skill levels can
make most fin model changeovers in
minutes.
8/3/2019 FOS Series Checked
http://slidepdf.com/reader/full/fos-series-checked 3/5
SPECIFICATION (FOS80/100/150)
Machine descriptions
Standard Units Options Main Machine
Uncoiler
Dancer roll unit
Tension control unit
Strip lubrication unitFin pitch control unit
Hump unit
Feed unit
Cut off unit
Uncoiler (Single coil type)
Fin Flattening unit
Forming unit auto clamp
Fin length checker and OK/NG dividing
chute
Fin Alignment unit
Fin tray
* Fin forming unit is available upon request.
Utility and Basic specification
Power supply Standard AC 200V 50/60 Hz
Control Voltage Control Voltage AC100V/50Hz DC24V
Power Voltage AC200V/50Hz
Control pneumatic More than 0.39MPa
Guaranteed term Within one series of operation / one(1)year
Production capability
FOS-80 FOS-100 FOS-150
Forming speed MAX 300m / min MAX 350m / min MAX 400m / min
Cutting speed MAX 80cuts / min MAX 100cuts / minMAX 150cuts / min
Cutting tolerance ±0 convolution
Fin specification: Standard model
Fin width 12-60㎜
Fin height Max12㎜
Fin length Max900mm
Material thickness 0.05-0.3㎜
Coil material specification
OD Max 1,800mm
ID 200mm – 300mm
8/3/2019 FOS Series Checked
http://slidepdf.com/reader/full/fos-series-checked 4/5
Weight capacity Max 250kg/1 coil
COMPACT MODEL of FOS FIN MILLSThe FOS-Mini Fin Mill uses fundamental
technologies for lower volume
manufacturers while providing the same
durability and precision fin production of
higher speed FOS models.
SPECIFICATION for FOS-Mini
Standard Units
Uncoiler
Dancer roll unit
Tension control unit
Strip lubrication unit
Fin forming unit
Fin pitch control unit
Hump unit
Feed unit
Cut off unit
* Fin forming unit is available upon request.
Utility and Basic specification
Power supply Standard AC 200V 50/60 Hz
Control Voltage Control Voltage AC100V/50Hz DC24V
Power Voltage AC200V/50Hz
Control pneumatic More than 0.39MPa
Guaranteed term Within one series of operation / one(1)year
8/3/2019 FOS Series Checked
http://slidepdf.com/reader/full/fos-series-checked 5/5
Production capability
Forming speed Max 100 m/minCut off speed Max 40 cuts/min
Cut off tolerance ±0 convolution
Fin specification: Standard model
Fin width 12-60㎜
Fin height Max12㎜
Fin length Max900mm
Material thickness TBD
Coil material specification
OD Max 1,000mm
ID 200mm – 300mm
Weight capacity Max 150kg/1 coil