L005613 FOS TV BICOLOR PANEL USER MANUAL L005613 FOS …

L005613 FOS TV BICOLOR PANEL USER MANUAL L005613 FOS TV BICOLOR PANEL USER MANUAL

FOS TV BICOLOR PANEL

L005613

CE RoHS

User Manual Please read this user manual before using this product！

Keep it for further reference!


Unqualified person involved with installation, operation and maintenance of this

device is prohibited

If any above mentioned problem happened, or unknown problem happened, please

contact manufacturer or distributor for assistance.

Innovation, Quality, Performance, Achieving Users’ Value!

12


·LED lifespan: 50,000hours

·Dimmer: 0~100%, 0-15% smoothly dimmer

·Beam angle: 120degree

·Color rendering index: Ra≥92

·Color temperature: 3200K-5600K

·Control mode: DMX-512

·DMX channel: 4CH/5CH

·Focus: manual focus adjustable

·Light visor: optional

·IP rating: IP20

·Housing material: aluminum alloy

·Working temperature: -25~40centigrad degree

Ⅸ APPENDIX

Problem and solution

Problem Reason Resolution

Device not work No power

AC100-240V, 50/60Hz

Check the power connection, and

make sure device connect the mains

in well condition.

Check if the fuse is good.

LED Bulb is off

LED bulb damaged Replacing LED bulb

LED drive board damaged Replacing LED drive board

Temperature switch damaged Replacing temperature switch

Fans not work Fans damaged Replacing fans

Caution

INDEX

Ⅰ PRODUCT MAIN FEATURES ......................................... 01

Ⅱ OVERVIEW AND DIMENSIONS ..................................... 02

Ⅲ SAFETY INFORMATION ................................................ 02

Ⅳ POWER CONNECTION .................................................. 03

Ⅴ CONTROL PANNEL ....................................................... 06

Ⅵ DMX PROTOCOL ........................................................... 09

Ⅶ COMMON INSTRUCTION .............................................. 10

Ⅷ TECHNICAL SPECIFICATION ........................................ 10

Ⅸ APPENDIX ..................................................................... 11

11


Thank you for using our product! Please read this manual carefully and completely. For

technical reference in future, please keep this user manual well. This user manual contains

all installation and operation information of this LED Soft Video Panel Light, it’s very useful

for user to install and operate the light. Please strictly abide by the relevant instruction for

the installation and operation.

This light has very beautiful appearance. Based on the LED Film and Television Flat Light

Technology, using high brightness SMD LED chips beads matrix arrangement of large area,

through the whole aluminum shell to realize heat dissipation naturally, we have designed

this light. This light has high brightness, good head dissipation, ultra-quiet and other

features. It can satisfy the requirement of indoor movie filming for the lighting layout. It is

a good substitute of the traditional Fresnel spot light, which is very suitable for the studio

room, TV station, Meeting room, stage, show and other entertainment places.

This light meets the following criteria:

GB7000.1-2007/IEC60598-1:2003

GB7000.217-2008/IEC60598-2-17:1984+A2:1990

Ⅰ PRODUCT MAIN FEATURES

The light’s lighting function is controlled by DMX-512, very convenient;

Using international standard (1990) DMX single, digital control panel display;

With 4/5 DMX channel control modes;

Dimmer range: 0~100%, 0~15% dimmer smoothly;

CRI more than 92, 3200-5600K color temperature optional, light effective distance is 3~15

meters;

Cast aluminum radiator, equips copper tube radiator, no need fan cooling, realize the silent,

CH2 Fixed Color-Tem.

000←→099

100←→149

150←→199

200←→255

Close

3200K

4500K

5600K

CH3 Color 1 000←→255 0-100% linear dimmer


CH5 Strobe 000←→255 Strobe from slow to fast

Ⅶ COMMON INSTRUCTION

The light uses international 3 pins DMX signal cannon for DMX in and DMX out;

The light uses digital display to show the parameter. If there is no DMX in, the display will

shows the information which you can check from the menu map.

In fact, the light has 2 DMX channels modes, please refer the DMX channel chart.

This light uses intelligent full aluminium shell for the heat dissipation, through the electronic

temperature detection ensure the stability of the circuit at any time;

This light is only for indoor use, when you install it by hanging, please use the safety cable

to ensure the safety.

If you have any questions, please contact with our sales manager.

Ⅷ TECHNICAL SPECIFICATION

·Input power: AC100~240V, 50/60Hz

·Power consumption: 200W

·Light sources: 1200pcs 0.2W SMD LED Lamps

01 10


3. Press UP/DOWN to choose Alone scene menu, then press to save;

4. Press UP/DOWN to choose Set auto mode Color Temperature menu, then press

ENTER into the option of color temperature;

5. Press UP/DOWN to choose Set auto mode Dimmer menu, then press ENTER into the

adjust function of the LED;

6. Press UP/DOWN to adjust the brightness (=000 light off, =255 Max brightness), after

the setting, press ENTER to save;

7. Press twice MENU/SET button to back the title mode(the second line will shows Master

Auto), the setting is ok.

*The sound active mode based on the light has the sound active mode or not, this is

a option function. Please contact sales manager when you need it.

Ⅵ DMX PROTOCOL

4CH MODE

CH Name Value Function

CH1 General dimmer 000←→255 0-100% linear dimmer

CH2 Fixed Color-Tem.

000←→099

100←→149

150←→199

200←→255

Close

3200K

4500K

5600K



5CH MODE

CH Name Value Function

CH1 General dimmer 000←→255 0-100% linear dimmer

intelligent temperature control system, improve the quality of our products stable

performance, apply to indoor installation.

Using brand LED chips, integrated encapsulation, improve reliability and long lifespan.

Using the advanced optical reflective material, make the light on the projection distance

and brightness is higher than traditional film soft light.

Ⅱ OVERVIEW AND DIMENSIONS

All dimensions are in millimeters

Ⅲ SAFETY INFORMATION

※Important

Every person involved with the installation, operation and maintenance of this device has to

be qualified and follow the instructions of this manual. Manufacturer will not with

responsibility for those operations which are not according to this Instruction.

02 09


Verify that the voltage matches the rated voltage.

When the voltage is 110V, Do not connect more than 10 lightings in total to AC mains

power in one interconnected daisy chain


power in one interconnected daisy chain

Before using the fixture, check that all power distribution equipment and cables are in

perfect condition and rated for the current requirements of all connected devices.

Always ground (earth) the fixture electrically.

Avoiding hit the Light when you are move or install the light.

The minimum distance between light-output and the illuminated surface must be more

than 0.5 meters. Keep all combustible materials (for example fabric, wood, paper) at least

0.2 meters away from the fixture.

Do not expose the fixture to rain or moisture.

Avoid looking directly into the light source (especially those who suffer from epileptic fits)

Maximum ambient temperature (Ta) is 40°C. Do not operate fixture at temperatures higher

than this.

The Maximum surface temperature is 50°C

When suspending the fixture above ground level, verify that the structure can hold at least

10 times the weight of all installed devices.

Verify that all external covers and rigging hardware are securely fastened and use an

approved means of secondary attachment such as a safety cable.

Ⅳ POWER CONNECTION

INSTALLING A NENUTRIK CONNECTOR ON A POWER CABLE

to save.

Mode Working mode option

Mode

= 04 Channel DMX

Mode

= 05 Channel DMX

Mode

= Alone scene ↓

Set auto mode Dimmer 1

Dimmer,

dimmer=0-255 = 000

Set auto mode Dimmer 2

Color Temperature=

3200K

4200K

5600K

= 000

Set alone scene Strobe

Strobe,

Strobe=0-255 = 000

Press UP,

DOWN button

to choose the

menu you

need, then

press ENTER

to save.

SETTING DMX 512 MODE

1. Press ENTER when the display show the title information;

2. Press UP/DOWN to choose the Mode menu, then press ENTER into;

3. Press UP/DOWN to choose 01 Channel DMX or 01 Chanel DMX menu, then press

ENTER to save;

4. Press MENU/SET back the title mode(the second line will shows 01CH or 01CH

Address=001), the setting is ok.

SETTING POWER ON, LIGHT ON


2. Press UP/DOWN to choose the Mode menu, then press ENTER into;

03 08


5. Press ENTER to save the setting;

6. Press MENU/SET button to back.

MENU MAP

LCD SHOW Function Instruction Operation of

Buttons

Supplementary

Instruction

T=xxxC ◆The temperature of LED

bulb radiator in real time

(Celsius)

◆If there is no this

temperature shows, means

the temperature sensor

failure

◆If the value over 80,

please check the wind path

is normal or not

No Signal Couldn't receive the DMX

512 signal

RX DMX Received the DMX 512

signal

RX Slave Slave mode You only need

set a master

light, the slave

light will be

identified

automatically

You need pull off the

DMX signal from

console under

master/salve mode

Address Address setting Press UP,

DOWN button

to set the

address you

need, then

press ENTER

Put bushing and chuck onto the cable.

Prepare cable as shown above. The power cable must is a three-conductor 2.5mm2 cable.

Insert the wire into the terminals and fasten the clamping device by a flat screw driver.

Push insert and chuck into housing (pay attention to the guiding keyway).

Fasten bushing.

The color-coding schemes and some possible pin identification schemes; if pins are not

clearly identified, or if you have any doubts about proper installation, consult a qualified

electrician.

RELAYING POWER TO OTHER DEVICES

The lightings can be linked in a chain by power cables which installed a blue and a

light-gray connectors on the two ends. The light-gray connector connects to the power out

socket of the first lighting, and the blue connector connects to the power in socket of the

subsequent lighting, and so on.

05

04 07


The power cable must is a three-conductor 2.5mm2 cable.


power in one interconnected daisy chain.


power in one interconnected daisy chain.

PHYSICAL INSTALLATION

This lighting can be placed on a horizontal surface such as a stage or clamped to a truss or

similar rigging structure in any orientation using a rigging clamp.

When suspending the fixture above ground level, verify that the structure can hold at least

10 times the weight of all installed devices.

Verify that all external covers and rigging hardware are securely fastened and use an

approved means of secondary attachment such as a safety cable.

Ⅴ CONTROL PANNEL

BUTTON

SET

UP

DOWN

ENTER

Call the main menu, or escape the current menu, (i.e. return to the

upper menu and give up the selected item or parameter).

Browse the menu item forward or increase the parameter.

Browse the menu item backward or decrease the parameter.

Confirm the selected item or parameter, (i.e. enter into the next menu,

or escape the current menu and save the selected item or parameter).

MAIN MENU

The way into the menu as below:


2. Press UP or DOWN button to choose the right menu which you need;

3. Press ENTER into the menu;

4. Press UP and DOWN button to set the parameter or setting;

Wire color Conductor Symbol

Brown Live L

Blue Neutral N

Yellow/green ground

07 06 05

L005613 FOS TV BICOLOR PANEL USER MANUAL L005613 FOS …

Documents

Transcript of L005613 FOS TV BICOLOR PANEL USER MANUAL L005613 FOS …