Post on 24-Nov-2018
FORD FIESTA ST
BLOW OFF VALVE ADAPTOR
1
Remove plastic vacuum hose from rubberadaptor on the top of valve cover (leaverubber adaptor in place).1
When lifting the caralways use stands tosecure the car.
2Remove the right front wheel.
3
Disconnect the blow of valve wireharness.
4
Remove the factory blow of valve.
5
Wipe out oil residue from the bottom ofthe turbo housing.
6
Boomba Blow Off Valve Adaptor ready forinstallation.
7
Install the Boomba Blow Off ValveAdaptor with provided screws. Connectthe wire harness. 8
Reinstall the right front wheel.
MATERIALS REQUIRED
None
TOOLS REQUIRED
Set of car standsM5 long allen wrench