FORD FIESTA ST

BLOW OFF VALVE ADAPTOR

1

Remove plastic vacuum hose from rubberadaptor on the top of valve cover (leaverubber adaptor in place).1

When lifting the caralways use stands tosecure the car.

2Remove the right front wheel.

3

Disconnect the blow of valve wireharness.

4

Remove the factory blow of valve.

5

Wipe out oil residue from the bottom ofthe turbo housing.

6

Boomba Blow Off Valve Adaptor ready forinstallation.

7

Install the Boomba Blow Off ValveAdaptor with provided screws. Connectthe wire harness. 8

Reinstall the right front wheel.

MATERIALS REQUIRED

None

TOOLS REQUIRED

Set of car standsM5 long allen wrench