Post on 15-Nov-2014
description
www.FlexibleAssembly.com (800) 696-76142
N.I.S.T Calibration• Computer generated certificates of calibration and calibration labels• Automatic recall notice for equipment approaching its calibration due date• We offer NIST Traceable Calibration compliant with the requirements of ANSI/ISO/ASQ Q9001-2000
Service & SupportFlexible Assembly Systems, Inc. provides only the highest quality products. That same quality extends when your product needs replacement parts and service.
Our in house repair specialists can custom design preventive maintenance programs for your air and electric tool(s). It is our goal to design our repair procedures around your needs and requirements so that our service center integrates seamlessly with your production. Please call or email us to find out which maintenance program works best for you.
• Quick turnaround (3-5 days for most items)• Low cost evaluation & repair assessment• Tool substitution available upon request• 90 day parts & labor warranty• Extended Warranty Packages• On-site Services• N.I.S.T Traceable Calibration• N.I.S.T Certificates available on requestSubmit your repair & calibration requests online!Visit our online service department @ www.FlexibleAssembly.com/Service-Support
www.FlexibleAssembly.com (800) 696-7614
Assembly Tools
Workplace Systems
Bits & Fastener Tools
Torque Instruments
Electric Screwdrivers 6-8Air Screwdrivers 9-10Pulse Tools 11Air Nutrunners 12DC Controlled Tools 13Cordless Screwdrivers 14-15Fastener Systems 16
Desktop Torque Testers 18-19Torque Analyzers 20Calibration Systems 21Torque Screwdrivers 22-23Adjustable Torque Wrenches 24Interchangeable Heads 25Dial Indicating Torque Wrenches 26Electronic Torque Wrenches 27Torque Multipliers 28
Torque Reaction Arms 30Tool Support Systems 31Tool Balancers 32Workstation Components 33Tool Accessories 34
Impact Sockets 36Nutsetters 37Adapters 37Bit Sets 37Power Bits 38
3
Table Of Contents
How To Order:1. Visit us online:
www.FlexibleAssembly.com(24 Hours, 7 Days a week)2. Email us:
info@FlexibleAssembly.com(24 Hours, 7 Days a week)3. Fax us toll-free:
(866) 587-9793(24 Hours, 7 Days a week)4. Call toll-free:
(800) 696-76148:00 am - 4:30 pm PST
Choose your method of payment:
Compare Our Prices and Save BIG!Lowest published prices online.
Knowledgeable Customer SupportOur customer service staff is well trained to help answer technical questions and assist in making the right choices when ordering.
Largest selection of Assembly EquipmentWe offer the largest selection of assembly tools and assembly related equipment around. We make it easier for you to find what you need.
Same Day ShippingEvery in-stock item ordered by 1:30pm PST ships the same day!
Reliability & SupportAll of our name brand products come with a minimum one year warranty. Repair technicians are on hand to provide maintenance and support for your existing tools.
Why Flexible Assembly Systems?
www.FlexibleAssembly.com (800) 696-76144
Product SelectionWe offer the most comprehensive selection of handheld torque controlled pneumatic, electric, and cordless tools in the industry. Our vast product selection provides you with an easy source for your assembly tool requirements.
Service & SupportOur technical department can provide you with highest quality repair service & calibration. Our technicians & specialists can custom design a repair and calibration program to provide a solution to suit your electric & air tool repair and preventive maintenance requirements.
Productivity & Effi ciencyWe provide equipment and tools that help streamline your assembly process to make it more effi cient and productive. Our products are easy to set up and simple to operate, allowing for more time to be spent on production and manufacturing.
Quality & ReliabilityGain peace of mind knowing the products you purchase from us are designed and built with the highest quality and performance. Buy with confi dence at Flexible Assembly Systems Inc because, in addition to the manufacturer’s warranty, we stand behind every item purchased from us for the life of the product.
ErgonomicsWe offer an extensive line of ergonomic tools & accessories that enable you to work safely and more comfortably. Reduce the risk of operator fatigue by providing ergonomically designed tools and accessories for your workplace.
Cost SavingsIncrease revenue and decrease your expenses by purchasing through Flexible Assembly Systems, Inc. Receive low pricing without sacrifi cing quality or performance. We are dedicated to providing you the right tools, and a commitment to customer service, at the lowest possible prices.
Product SelectionWe offer the most comprehensive selection of handheld torque controlled pneumatic, electric, and cordless tools in the industry. Our vast product selection provides you with an easy source for your assembly tool requirements.
Service & Support Our technical department can provide you with highest quality repair service & calibration. Our technicians & specialists can custom design a repair and calibration program to provide a solution to suit your electric & air tool repair and preventive maintenance requirements.
Productivity & EfficiencyWe provide equipment and tools that help streamline your assembly process to make it more efficient and productive. Our products are easy to set up and simple to operate, allowing for more time to be spent on production and manufacturing.
Quality & Reliability Gain peace of mind knowing the products you purchase from us are designed and built with the highest quality and performance. Buy with confidence at Flexible Assembly Systems Inc. In addition to the manufacturer’s warranty, we stand behind every item purchased from us for the life of the product.
ErgonomicsWe offer an extensive line of ergonomic tools & accessories that enable you to work safely and more comfortably. Reduce the risk of operator fatigue by providing ergonomically designed tools and accessories for your workplace.
Cost SavingsIncrease revenue and decrease your expenses by purchasing through Flexible Assembly Systems, Inc. Receive low pricing without sacrificing quality or performance. We are dedicated to providing you with the right tools, and a commitment to customer service, at the lowest possible prices.
www.FlexibleAssembly.com (800) 696-7614 3
Electric Screwdrivers 6-8Air Screwdrivers 9-10Pulse Tools 11Air Nutrunners 12DC Controlled Tools 13Cordless Screwdrivers 14-15Fastener Systems 16
Assembly ToolsTorque Controlled Electric Screwdrivers
• Certified accuracies within +/- 5%• Dynamic motor brake reduces torque reaction• Shuts off automatically when desired torque is reached• Precise torque control for more efficient and accurate production• Variable speed and soft start adjustment on lower torque models• Recommended for assembling where precise torque control is required
ModelNumber
(Push To Start)
ModelNumber
(Lever Start)
Torque RangeIn Lb (Nm)
Free Speed
Power Supply Required
Drive Size
LengthInches
WeightLbs
- ES50T 0.5 - 9.0 (.06 - 1.0) 500-650 ESCB50 1/4” 8.88 0.75
ES60P ES60T 4.0 - 17.0 (.5 - 1.9) 1000 115V 1/4” 10.0 1.53
ES70P ES70T 10.0 - 26.0 (1.1 - 2.9) 700 115V 1/4” 10.0 1.53
ES90P ES90T 6.0 - 16.0 (.5 - 1.8) 2000 115V 1/4” 10.0 1.53
ES100P ES100T 15.0 - 40.0 (1.9 - 4.5) 400 115V 1/4” 10.0 1.68
- ES60T2S3 6.0 - 23.0 (.68 - 2.6) 650 115V 1/4” 16.89 2.10
- ES90T2S3 6.0 - 19.0 (.68 - 2.2) 1300 115V 1/4” 16.89 2.10
- ES100T2S3 14.0 - 56.0 (1.6 - 6.3) 250 115V 1/4” 16.89 2.10
Units Include• Two brushes (ES60T-619)• Suspension bail (ES60T-365)• Two Phillips bits
ModelNumber
(Push To Start)
ModelNumber
(Lever Start)
Torque RangeIn Lb (Nm)
Free Speed
Power Supply Required
Drive Size
LengthInches
WeightLbs
- EL0109B 0.26 - 1.3 (.03 - .15) 650-950 EC24N 4mm 8.63 0.70
- EL0410B 0.44 - 4.79 (.06 - 1.2) 500-700 EC24N 1/4” 8.63 0.70
- EL1007B 0.5 - 10.5 (.06 - 1.2) 500-700 EC24N 1/4” 8.63 0.70
EP1510N EL1510N 5.0 - 15.0 (.6 - 1.7) 1000 115V 1/4” 10.75 1.6
EP1520N EL1520N 5.0 - 15.0 (.6 - 1.7) 2000 115V 1/4” 10.75 1.6
EP2612N EL2612N 11.0 - 26.0 (.5 - 1.8) 1200 115V 1/4” 10.75 1.6
EP4007N ET4007N 18.0 - 40.0 (2.0 - 4.5) 700 115V 1/4” 10.75 1.6
- EL2612N2S3 17.0 - 40.0 (1.9 - 8.5) 800 115V 1/4” 17.64 1.73
- ET4007N2S3 27.0 - 60.0 (3.0 - 6.8) 450 115V 1/4” 17.64 1.73
• Certified accuracies within +/- 5%• Brush Replacement Light• Innovative Cord Connector• Dynamic motor brake reduces torque reaction• Shuts off automatically when desired torque is reached• Variable speed and soft start adjustment on lower torque models• Recommended for assembling where precise torque control is required
Units Include• Two brushes (ES60T-619)• Suspension bail (ES60T-365)• Two Phillips bits
* Model ES50T includes two clutch springs (High & Low) to cover torque range (Tool is shipped with heavy spring installed).
* Model EL1007B includes two clutch springs (High & Low) to cover torque range (Tool is shipped with heavy spring installed).
Ele
ctric
Scr
ewdr
iver
s
Torque Adjustment CoverFits over torque adjustment to minimize tampering or accidental turning once the torque is set. • ES60T-TAC -For use with
ES60, ES70, ES80, ES90, and ES100 models
• ES50T-483 -For use with ES50T, EL1007B, EL0410B, EL0109B models
ES60PES100T2S3
ES50T & ESCB50
ES100T
DLW2100TP EP4007N-48
EL2612N2S3
EL1007B & EC24N
EP1510N
EP4007N
Electric Screwdrivers
Electric Screwdrivers
Pistol Grip AttachmentConvert your inline screw-driver to a pistol grip style• DLW2100TP -For use
with trigger & push to start models ES60, ES70, ES80, ES90, and ES100
• EP4007N-48 -For use with trigger & push to start mod-els 1510N, 1520N, 2612N, 4007N
www.FlexibleAssembly.com (800) 696-76146
Assembly ToolsCleanroom & ESD Electric Screwdrivers
ModelNumber
(Push To Start)
ModelNumber
(Lever Start)
Torque RangeIn Lb (Nm) Free Speed Power Supply
RequiredDrive Size
LengthInches
WeightLbs
ESD Only
- ELM0107N 0.18 - 1.77 ( 0.02 - 0.20 ) 500-750 ECM24N 4mm 6.5 0.50
- ELM0110N 0.18 - 1.77 (0.02 - 0.20) 700-1000 ECM24N 4mm 6.5 0.05
- ELM0306N 1.33 - 3.54 (0.15 - 0.40 ) 450-600 ECM24N 4mm 6.5 0.05
- EL1007BC-ESD 1.7 - 10.4 ( 0.2 - 1.18 ) 500-700 EC24N-ESD 1/4” 10.5 0.90
Soft Stop & ESD Screwdrivers
Electric S
crewdrivers
www.FlexibleAssembly.com (800) 696-7614 7
• Class 100 Clean Room rating• Certified accuracies within +/- 3%• ESD (Electro-Static Discharge) control, for use in ESD sensitive environments – Grounded automatic shut-off clutch – Fully grounded controller / power supply – Carbon powder control cord with resin coating – Carbon fiber impregnated housing, trigger, switches, and controller face• Vacuum pick-up ready (optional accessory)• Grounded bit-The bit holder assembly is grounded to route any existing charge to ground• Reduces the clutch inertia & vibration to the workpiece to 1/10th of standard electric screwdrivers• Long-lasting ESD resistant handle-material will maintain it’s integrity for the life of the handle, unlike coatings or paints• Minimizes soft and hard failures to sensitive electronic equipment by limiting the motor inertia as the clutch begins to shut off• Uniquely composed housing-handle and triggers material are constructed of uniquely composed plastic throughout, enabling any charge received by the handle to be routed to ground
El1007BC-ESD & EC24N-ESD
Soft Stop & ESD
- EL0410BC-SS-ESD 2.2 - 4.8 ( 0.19 - 0.39) 700-1000 EC24N-ESD 4mm 10.5 0.90
- EL0510BC-SS-ESD 1.3 - 8.70 ( 0.24 - 0.54) 700-1000 EC24N-ESD 4mm 10.5 0.90
- EL0807BC-SS-ESD 3.9 - 8.2 ( 0.44 - 0.92) 500-7000 EC24N-ESD 4mm 10.5 0.90
- EL1007BC-SS-ESD 10.4 - 26.0 ( 1.17 - 2.9) 700-1000 EC24N-ESD 4mm 10.5 0.90
ModelNumber
(Push To Start)
ModelNumber
(Lever Start)
Torque RangeIn Lb (Nm) Free Speed Power Supply
RequiredDrive Size
LengthInches
WeightLbs
Brushless
EPB2620N ELB2620N 3.5 - 26.5 ( 0.4 - 3.0) 2000 115V 1/4” 10.8 0.90
EPB2612N ELB2612N 3.5 - 26.5 ( 0.4 - 3.0) 1200 115V 1/4” 10.8 0.90
EPB2620N ELB2620N
ECM24N & ELM0107N
• RoHS Compliant• Certified accuracies within +/- 5%• Ergonomically designed soft grip• Torque adjustment cover included• Recommended for assembling where precise torque control is required• Heat generated by the motor and electricity consumption are reduced by up to 50%• Suitable for cleanroon environments because the motor has no emission of carbon dust• Designed for high production environments. Minimal heat build-up even when tool is operated continuously.• High performance brushless motor design provides durability and reduces the standard maintenance cost for electric drivers
Brushless Screwdrivers
Assembly ToolsTorque Controlled Electric Screwdrivers
Ele
ctric
Scr
ewdr
iver
s
www.FlexibleAssembly.com (800) 696-76148
• Certified accuracies within +/- 5%• Ergonomic hand grip and lightweight• Push-to-start and lever operated styles available• Shuts off automatically when desired torque is reached• Precise torque control for more efficient and accurate production• Low voltage requirement offers superior life and safe operation• Designed for heavy-duty production and delivers reliability and precision torque• Ensures accuracy in fastening with precision automatic shut-off clutch once preset torque is achieved
ModelNumber
(Push To Start)
ModelNumber
(Lever Start)
Torque RangeIn Lbs (Nm)
Free Speed
Power Supply Required
Drive Size
LengthInches
WeightLbs
BL Series
- BL-3000 0.25 - 1.69 (0.02 - 0.19) 960-1100 T-70BL 4.0mm 7.4” 0.7
- BL-5000 2.0 - 11.0 (0.22 - 1.24) 680-1000 T-70BL 1/4” 8.0” 0.8
- BL-7000 5.0 - 21.0 (0.56 - 2.37) 730-1050 T-70BL 1/4” 9.4” 1.4
CL Series
- CL-2000 0.17 - 1.69 (0.02 - 0.19) 490-680 CLT-50 4.0mm 6.5” 0.5
- CL-3000 0.19 - 1.56 (0.02 - 0.18) 670-1000 CLT-50 4.0mm 6.4” 0.8
- CL-4000 0.5 - 5.0 (0.05 - 0.56) 670-1000 CLT-50 1/4” 7.5” 0.9
CL-6000-PS CL-6000 1.7 - 8.5 (0.19 - 0.96) 500-790 CLT-50 1/4” 8.5” 1.3
CL-6500-PS CL-6500 1.2 - 14.0 (0.13 - 1.58) 600-910 CLT-50 1/4” 9.0” 1.5
CL-7000-PS CL-7000 2.5 - 20.0 (0.28 - 2.26) 500-750 CLT-50 1/4” 10” 1.7
VZ Series
VZ-1820-PS VZ-1820 3.5 - 16.0 (0.4 - 1.80) 2000 115V AC 1/4” 11” 1.5
VZ-3012-PS VZ-3012 8.0 - 26.0 (.9 - 3.00) 1200 115V AC 1/4” 11” 1.5
VZ-4506-PS VZ-4506 9.0 - 39.0 (1.0 - 4.50) 600 115V AC 1/4” 11” 1.5
Electric Screwdrivers
ModelNumber
(Push To Start)
ModelNumber
(Lever Start)
Torque RangeIn Lbs (Nm)
Free Speed
Power Supply Re-quired
Drive Size
LengthInches
WeightLbs
ESL301P-ESD ESL301-ESD 4.0 - 19.0 (0.45 - 2.1) 1000 120V 1/4” 9.5 1.2
ESL302P-ESD ESL302-ESD 2.0 - 12.0 (0.2 - 1.4) 525 120V 1/4” 9.5 1.2
- ESL312-ESD 0.9 - 8.8 (0.1 - 1.0) 470/670 ECT320 or ECT345 1/4 8.9 0.7
ESL324P-ESD ESL324-ESD 3.0 - 16.0 (0.3 - 1.8) 700/1000 ECT320 or ECT345 1/4 9.4 1.1
ESL327P-ESD ESL327-ESD 6.0 - 23.0 (0.7 - 2.6) 600/850 ECT320 or ECT345 1/4 10.0 1.3
ESL329P-ESD ESL329-ESD 15.0 - 41.0 (1.7 - 4.6) 370/530 ECT320 or ECT345 1/4 10.5 1.8
• Certified accuracies within +/- 5%• Wide torque range - single model versatility• Low torque reaction, light and easy to handle• ESD-safe ergonomic grip housing, CE / RoHS• Push-to-start and lever operated styles available• Ergonomic soft cushion grip for operator comfort• Externally replaceable brushes for ease of maintenance• Precision shut-off clutch provides excellent torque repeatability• External torque adjustment - easy to set up and secure with optional torque locking sleeve
* Model ECT345 is a dual power supply that can be utilized by up to two electric screwdrivers
ESL301
ESL327
ECT345ECT320
ESD Electric Screwdrivers
Assembly ToolsTorque Controlled Electric Screwdrivers
ModelNumber
(Push To Start)
Model Number
(Lever Start)Clutch Type Torque Range
In Lbs (Nm) Drive Size Free Speed
Overall Length
WeightLbs
Straight Models
1RPLS1 - Shut Off 3.5 - 13 (.4 - 1.45) 1/4” Hex 2800 8.38” 1.1
1RPMS1 - Shut Off 2.5 - 20 (.30 - 2.25) 1/4” Hex 1650 8.75” 1.1
1RPNS1 1RLNS1 Shut Off 1.5 - 30 (.15 - 3.40) 1/4” Hex 1000 8.75” 1.1
1RPQS1 1RLQS1 Shut Off 1.5 - 45 (.15 - 5.10) 1/4” Hex 500 8.75” 1.1
1RPMC1 1RLMC1 Cushion 2.5 - 20 (.30 - 2.25) 1/4” Hex 1650 8.75” 1.1
1RPNC1 1RLNC1 Cushion 1.5 - 30 (.15 - 3.40) 1/4” Hex 1000 8.75” 1.1
• 0.15 to 5.2 Nm torque range• 19 different models available• Square drive and quick change drives available• Select from automatic shut-off and cushion clutch models• Small ergonomic design provides continued comfort to operator• Recommended for assembling where precise torque control is required• Includes torque adjustment cover to prevent unauthorized torque adjustment• Soft-touch grip and convenient control push to start or lever start models available
Pistol Grip Models
1RTMS1 - Shut Off 2.5 - 20 (.30 - 2.25) 1/4” Hex 1650 8.56” 1.5
1RTNS1 - Shut Off 1.5 - 30 (.15 - 3.40) 1/4” Hex 1000 8.56” 1.5
1RTQS1 - Shut Off 1.5 - 45 (.15 - 5.10) 1/4” Hex 500 8.75” 1.5
- 1RAMC1 Cushion 2.5 - 20 (.30 - 2.25) 1/4” Hex 1650 8.56” 1.5
- 1RANC1 Cushion 1.5 - 30 (.15 - 3.40) 1/4” Hex 1000 8.56” 1.5
ModelNumber
(Push To Start)
Model Number
(Trigger Start)Clutch Type Torque Range
In Lbs (Nm) Drive Size Free Speed
Overall Length
WeightLbs
Pistol Grip Models
41PA8PSQ4 - Shut Off 15 - 100 (1.7 - 11.3) 1/4” Hex 800 9.8” 3.0
- 41PA8TSQ4 Shut Off 15 - 100 (1.7 - 11.3) 1/4” Hex 800 9.8” 3.0
Angle Head Models *Angle head side to center distance = 1.3” (33mm”)
- 1RLM2S5 Shut Off 4.0 - 30 (.45 - 3.40) 1/4” Sq 1100 8.4” 1.7
- 1RLN2S5 Shut Off 2.2 - 46 (.25 - 5.20) 1/4” Sq 700 8.7” 1.7
- 1RLN2S3 Shut Off 2.2 - 46 (.25 - 5.20) 1/4” Hex 700 8.7” 1.7
Straight Models
41SA8PSQ4 - Shut Off 15 - 100 (1.7 - 11.3) 1/4” Sq 800 10.9” 2.7
- 41SA8LPQ4 Shut Off 15 - 100 (1.7 - 11.3) 1/4” Sq 800 10.9” 2.7
• High torque models 15 - 100 In Lb torque ranges• Includes ergonomic “Skinsulate” housing• Select from automatic shut-off models• For assembling where precise torque control is required
High Torque Models
Air Screwdrivers
Air Tool Accessories
• FRL’s • Air Hoses
• Air Tool Oil • FittingsSEE PAGE 34
www.FlexibleAssembly.com (800) 696-7614 9
Air S
crewdrivers
Assembly ToolsTorque Controlled Air Screwdrivers
ModelNumber
(Push To Start)
ModelNumber
(Lever Start)
Clutch Type
Torque Range In Lbs (Nm) Drive Size Free
SpeedOverall Length
WeightLbs
Straight Models
US-LT20B-10 - Shut Off 1.3 - 9.5 (.15 - 1.08) 1/4” Hex 2800 7.1” 0.7
US-LT30B-17 US-LT30BL-17 Shut Off 3.5 - 13.0 (.39 - 1.47) 1/4” Hex 1100 7.2” 0.9
US-LT30B-11 US-LT30BL-11 Shut Off 3.5 - 18.5 (.39 - 2.10) 1/4” Hex 1700 7.2” 0.9
US-LT40B-08 US-LT40BL-08 Shut Off 8.7 - 34.7 (.98 - 3.92) 1/4” Hex 800 8.1” 1.4
US-LT50B-17 - Shut Off 13.0 - 23.0 (1.47 - 2.60) 1/4” Hex 1700 9.4” 2.2
US-LT50B-05 - Shut Off 13.0 - 91.1 (1.47 - 10.3) 1/4” Hex 480 9.4” 2.2
Pistol Grip Models
- US-LT31PB-05 Shut Off 8.7 - 44.0 (.98 - 5.0) 1/4” Hex 500 7.9” 1.9
- US-LT41PB-08 Shut Off 8.7 - 34.7 (.98 - 3.92) 1/4” Hex 800 7.2” 1.8
- US-LT51PB-05 Shut Off 13 - 91.1 (1.47 - 10.3) 1/4” Hex 480 8.5” 2.6
- US-LT60P-03P Shut Off 60.0 - 147.6 (6.8 - 16.7) 3/8” Sq 320 9.4” 3.7
Angle Models
- US-LT30B-17C Shut Off 3.5 - 13.0 (.39 - 1.47) 1/4” Hex 1700 10.7” 1.5
- US-LT40B-05C Shut Off 20.0 - 49.5 (2.26 - 5.60) 1/4” Hex 500 13” 2.1
- US-LT40-03C Shut Off 43.4 - 86.8 (4.90 - 9.80) 1/4” Sq 315 14.2” 2.4
• Choices of speeds for flexibility• External simple torque adjustment• Quick shut-off for minimum torque reaction• Very little wear on internal parts, for long life• Precise repeatability to improve your quality• Additional clutch spring specifications available• Best choice for industrial torque control applications• Midrange air motor provides high speed during entire cycle• Oil free rotor blades provide a clean, slick-free environment• Easy to operate locking reverse button makes disassembly simple
*Each model is equipped with its standard and alternate clutch spring*Air Hose Size: 1/4” I.D. for US-LT20B - US-LT40B Series Air Inlet: 1/8” for US-LT20B Series 3/8” I.D. for US-LT50B Series 1/4” for US-LT30B - US-LT50B Series
Model Number
DimensionsODxIDxLength
Max Pressure NPT Fitting
TB-14-10-RS 3/8” x 1/4” x 8’ 160 PSI 1/4”
TB-14-15-RS 3/8” x 1/4” x 12’ 160 PSI 1/4”
TB-14-25-RS 3/8” x 1/4” x 20’ 160 PSI 1/4”
TB-38-15-RS 9/16” x 3/8” x 12’ 160 PSI 3/8”
TB-38-25-RS 9/16” x 3/8” x 20’ 160 PSI 3/8”
Model Number Air Flow Max Pressure NPT Fitting
C28121-800 44 CFM 250 PSI 1/4”
C28231-800 100 CFM 175 PSI 3/8”
Complete Filter Regulator & Lubricator (FRL)Polyurethane Spiral Hose
• Lightweight• Non-Kinking• Abrasive Resistant• Thread Sealant on all male fittings • Removes debris
• Removes moisture• Polycarbonate Bowl• Includes mounting bracket• Includes pressure guage• Applies constant lubrication• Extends the life of your air tools
Air Screwdrivers
Assembly ToolsTorque Controlled Pulse Tools
www.FlexibleAssembly.com (800) 696-761410
Air
Scr
ewdr
iver
s
Assembly ToolsTorque Controlled Air Screwdrivers
Pulse Tools
www.FlexibleAssembly.com (800) 696-7614 11
QC100 & QC200 Qualifier
• OK / NOK Signal • Batch/Gang Timing • Batch/Gang Counting • Networking Capabilities • Error Proofing Detects - Rehits - Cross Threads - Early Throttle Release • Shutoff Capability for Non-Shutoff Tools
ModelNumber
Torque Range Ft Lbs (Nm)
FreeSpeed Clutch Type Drive Size Overall
LengthWeight
Lbs
Pistol Grip Models
ULT-30D 1.9 - 4.1 (2.5 - 5.5) 3800 Shut Off 1/4” Hex 6.4” 1.9
ULT-40(D) 3.3 - 5.9 (4.5 - 8.0) 3600 Shut Off 1/4” Hex or 3/8 Sq 6.4” 2.0
ULT-50(D) 5.2 - 11.5 (7.0 - 15.5) 4400 Shut Off 1/4” Hex or 3/8 Sq 6.4” 2.0
ULT-60(D) 11.0 - 24.0 (15.0 - 32.0) 6700 Shut Off 1/4” Hex or 3/8 Sq 6.8” 2.1
ULT-70 22.0 - 33.0 (30.0 - 45.0) 6000 Shut Off 3/8” Sq 7.0” 2.3
ULT-90 37.0 - 63.0 (50.0 - 85.0) 5700 Shut Off 1/2” Sq 7.5” 3.2
ULT-100 52.0 - 96.0 ( 70.0 - 130.0) 5200 Shut Off 1/2” Sq 7.8” 3.7
Straight Models
ULT-30SD 1.8 - 4.0 (2.5 - 5.5) 3700 Shut Off 1/4” Hex 8.7” 1.6
ULT-40S(D) 3.3 - 5.9 (4.5 - 8.0) 3600 Shut Off 1/4” Hex or 3/8 Sq 8.7” 1.7
ULT-50S(D) 5.0 - 11.4 (7.0 - 15.5) 5000 Shut Off 1/4” Hex or 3/8 Sq 8.7” 1.7
ULT-60S(D) 11.0 - 24.0 (15.0 - 32.0) 5700 Shut Off 1/4” Hex or 3/8 Sq 9.1” 1.8
ULT-70S 22.0 - 33.0 (30.0 - 45.0) 6000 Shut Off 3/8” Sq 9.4” 2.1
• New Mechanism design improves sealing characteristics• Improved motor efficiency means more power with less air• Specially coated blades last 2 times longer than conventional blades• Lighter, smaller, quieter, lower trigger force, vibration and reaction force• Lube free self-lubricating blades and cylinder reduce oil mist in the environment• Recommended for the majority of applications where speed and ergonomics are important
• Low noise and vibration • Pulse unit eliminates all torque reaction• Faster pulsing under load for the fastest cycle times• New design reduces friction in pulse motor for longer tool life• Automatic shutoff function available for reduced operator influence• More power in a smaller package, in addition to an air motor redesign• Feather touch trigger with interchangeable direction lever (for right or left handed operators)• Incorporated driving blade rollers reduce friction inside the pulse unit, maximizing the power in a smaller package
* Model numbers ending in “D” come standard with 1/4” Hex quick-change chuck. Please specify when ordering.
ModelNumber
Torque Range Ft Lbs (Nm)
FreeSpeed Clutch Type Drive Size Overall
LengthWeight
Lbs
Pistol Grip Models (Non Shut Off)
Q70PQ1 15.0 - 20.0 (20.0 - 28.0) 7000 Non-Shut Off 1/4” Hex 5.2” 1.76
Q70P3 18.0 - 25.0 (24.0 - 35.0) 7000 Non-Shut Off 3/8 Sq 5.2” 1.76
Q80PQ1 18.0 - 25.0 (24.0 - 35.0) 7000 Non-Shut Off 1/4” Hex 5.4” 1.87
Q80P3 25.0 - 36.0 (33.5 - 50.0) 7000 Non-Shut Off 3/8 Sq 5.4” 1.87
Q90P3 35.0 - 48.0 (47.0 - 65.0) 6500 Non-Shut Off 3/8 Sq 5.8” 2.14
Q110P4 48.0 - 74.0 (65.0 - 100.0) 5500 Non-Shut Off 1/2” Sq 6.5” 3.04
Auto Shut Off Pulse Tools
Non Shut Off Pulse Tools
Air Tool Accessories
• FRL’s • Air Hoses
• Air Tool Oil • FittingsSEE PAGE 34
Assembly ToolsTorque Controlled Pulse Tools
Assembly ToolsTorque Controlled Air Nutrunners
Air
Nur
unne
rs
ModelNumber
(Lever Start)
Clutch Type
Torque RangeFt Lbs (Nm)
Free Speed
Drive Size
LengthInches
WeightLbs cfm NPT
Inline Models
QA4ASLS012NP41S06 Shut Off 4.4 – 8.8 (6 – 12) 1050 3/8” 18.3 3.22 27 1/4”
QA4ASLS020NP41S06 Shut Off 7.4 – 14.8 (10 – 20) 600 3/8” 18.3 3.22 27 1/4”
QA4ASLS046NP41S06 Shut Off 14.8 – 33.9 (20 – 46) 250 3/8” 18.8 3.73 27 1/4”
QA6ASLS055NP41S08 Shut Off 18.4 – 40.6 (25 – 55) 325 1/2” 18.8 5.09 36 3/8”
QA8ASLS090NP41S08 Shut Off 33.2 – 66.4 (45 – 90) 255 1/2” 21.3 6.33 41 3/8”
QA8ASLS150NF41S08 Shut Off 55.3 – 110.6 (75 – 150) 165 1/2” 21.3 7.50 41 3/8”
QA8ASLS180NF41S08 Shut Off 66.4 – 132.8 (90 – 180) 140 1/2” 21.3 7.50 41 3/8”
Air Nutrunners
ModelNumber
(Lever Start)
Clutch Type
Maximum Torque
Ft Lbs (Nm)
Free Speed
Drive SizeInches (mm)
LengthInches
WeightLbs cfm NPT
Open End Tubenuts
UOW-11-10 Stall 9.4 (12.7) 400 1/4 - 7/16 (7 - 12) 11.7 3.1 12.5 1/4”
UOW-11-14 Stall 11.6 (15.7) 260 3/8 - 5/8 (10 - 17) 12.2 4.0 12.5 1/4”
UOW-11-30 Stall 23.1 (31.4) 135 5/8 - 1-3/16 (17-32) 13.6 5.5 12.5 1/4”
* Torque ranges listed are based off of a rating @ 90 psi. Lower torque ranges can be acheived at a minimum 77 psi.
Angle Head Models
QA4AALS011NP25S06 Shut Off 3.7 – 8.5 (5 – 11) 1025 3/8” 13.5 3.17 27 1/4”
QA4AALS020NP28S06 Shut Off 7.4 – 14.8 (10 – 20) 625 3/8” 14.3 3.35 27 1/4”
QA6AALS040NP35S08 Shut Off 14.8 – 29.5 (20 – 40) 430 1/2” 16.9 5.07 36 3/8”
QA8AALS090NP43S08 Shut Off 33.2 – 66.4 (45 – 90) 255 1/2” 17.5 5.40 41 3/8”
QA8AALS150NP48S08 Shut Off 55.3 – 110.6 (75 – 150) 145 1/2” 19.2 6.88 41 3/8”
QA8AALS225NF56S12 Shut Off 92.2 – 166.0 (125 – 225) 90 3/4” 20.0 8.86 41 3/8”
• Allows access to fastening in tight spaces• Custom heads are available upon request• Specify hex size of gear socket when ordering• Reverse rotation obtained by simply turning tool over • Designed for silent operation and longer tool life with the all-gear drive mechanism• Wide variety of socket sizes, head thickness, and tool lengths allow access to many difficult applications
* Torque ranges listed are based off of a rating @ 85 psi.
Open End Tubenuts & Ratchet Wrenches
UOW-11-14
URW-8N
Ratchet Wrenches
URW-8N Stall 11.6 (15.7) 220 1/4 - 9/16 (6 - 15) 11.8 4.0 19.5 1/4”
URW-9N Stall 23.1 (31.4) 200 1/4 - 9/16 (6 - 15) 15.0 5.0 23.7 1/4”
URW-12N Stall 43.4 (58.8) 150 5/16 - 7/8 (12 - 22) 15.6 5.9 25.0 1/4”
• Non-lube motor• Ergonomic grip for operator comfort• 2-year warranty on anglehead and clutch• Ideally positioned reversering for ease of use• Adjustable shutoff clutch or stall versions available• Clutch tested to over 1 million cycles without failure• Extensive torque range coverage from 4.4 to 166 Ft Lbs • Longer service life through precision machining and heat treatment• Add a QC100 or QC200 Air Tool Qualifier for cycle & batch counting• Quick, precise clutch shutoff limits scatter and torque reaction to the operator• Angle head models feature a unique 360-degree indexing for easy adaptability• Single or multi-spindle fixtured systems available to increase productivity and improve joint quality
QTA Series Torque Reation Arm
SEE PAGE 30
Air Tool Accessories
• FRL’s • Air Hoses
• Air Tool Oil • FittingsSEE PAGE 34
www.FlexibleAssembly.com (800) 696-761412
• Verifies proper fastening (torque & angle)• Programming from PC or keypad• Counts fasteners for batch counting• Accept / Reject indication on all rundowns• Visual and audible signals for fastening status• Simple setup & minimal training requirements • Communicates with your PLC and computer network• Precisely control and monitor your fastening process• Detects fastening errors (Cross-thread, double hits, and premature trigger release)• Advanced multispindle fastening strategies, remote monitoring, and data archiving• Enables ODBC-compliant database archiving, searching, and statistics processing• Allows operators to program advanced fastening strategies including yield and prevailing torque control• Enables programming of multiple IC1D and IC1M controllers connected through a local area network (LAN) or direct connection• Advanced programming & management of a network of up to 500 IC1D or IC1M controllers using QE tools, QM spindles, or multispindle systems
DC
Controlled Tools
Assembly ToolsTorque Controlled DC Electric Tools
ICS software provides operators the ability to access and program advanced and basic fastening strategies. Optimizing your system is as simple as selecting one of four packages: ICS Connect, ICS Network, ICS MultiSync, ICS Enterprise. All packages are different levels of the ICS software that are available to meet the various technical requirements.
DC Controlled Tools
ICS Software Suite
IC1DIC1M
ModelNumber
(Push to Start)
ModelNumber
(Lever Start)
Torque RangeFt Lbs (Nm)
Free Speed Controller Required Drive
SizeLengthInches
WeightLbs
Inline Models
QE4TS010R11S04 QE4SL010B21S04 0.74 - 7.40 (1.0 - 10.0 Nm) 1820 IC1D or IC1M 1/4” 13.4 2.5
QE4TS020R11S04 QE4SL020B21S04 1.48 - 14.80 (2.0 - 20.0 Nm) 900 IC1D or IC1M 1/4” 13.4 2.5
- QE6SL028B41S06 2.0 - 20.65 (2.8 - 28.0 Nm) 1360 IC1D or IC1M 3/8” 19.7 4.6
- QE6SL050B41S06 3.70 - 37.0 (5.0 - 50 Nm) 750 IC1D or IC1M 1/2” 19.7 4.6
Pistol Grip Models
- QE4PT010P11S04 0.74 - 7.40 (1.0 - 10.0 Nm) 1820 IC1D or IC1M 1/4” 9.2 2.8
- QE4PT015P11S04 1.1 - 10.0 (1.5 - 15.0 Nm) 1220 IC1D or IC1M 1/4” 9.2 2.8
- QE4PT020P11S06 1.48 - 14.80 (2.0 - 20.0 Nm) 900 IC1D or IC1M 3/8” 9.2 2.8
- QE4PT025P11S06 1.84 - 18.4 (2.5 - 25.0 Nm) 710 IC1D or IC1M 3/8” 9.2 2.8
Angle Head Models
- QE4AT013PA2S06 0.95 - 9.6 (1.3 - 13.0 Nm) 1200 IC1D or IC1M 3/8” 14.6 2.8
- QE4AT034PA4S06 2.5 - 25.0 (3.4 - 34.0 Nm) 470 IC1D or IC1M 3/8” 14.6 2.8
- QE6AT055PA5S08 4.0 - 40.5 (5.5 - 55.0 Nm) 650 IC1D or IC1M 1/2” 17.3 4.1
- QE8AT115PA6S08 8.4 - 84.8 (11.5 - 115.0) 660 IC1D or IC1M 1/2” 20.3 6.4
Specialty Head Attachments
Socket Trays
Parameter Transfer Key
*Not all DC tool models are listed. If you have a specific torque range not included by the tools above please contact us for product availability.
• Off Sets• Crow Feet• Tube Nuts• Hold & Drive
Senses when the next socket is picked up and the controller automatically switches to the next run down configuration. 4 position (shown) or 8 position socket tray models available.
Easily upload program changes to the controller by use of a USB flash drive.
GEA40-CORD
www.FlexibleAssembly.com (800) 696-7614 13
Cor
dles
s S
crew
driv
ers
• Certified accuracies within +/- 5%• Torque range from 4.4 In Lbs - 30.0 Ft Lbs• Auto battery shutoff ensures consistent fastening torque• Available in both pistol grip or angle models to improve ergonomics• Less energy consumption to power cordless tools then pneumatic tools• Indication lamp and beeper notifies the user of pass or no pass rundown• Torque set window allows the operator to view the desired torque setting• Built-in L.E.D lamps activate when trigger is pulled for low-light conditions• Once the preset desired torque is achieved, the tool automatically stops• More flexibility in confined workspace or non-close quarters fastening applications• More freedom to work in multiple workstations without being tethered to a fixed position• Greater maneuverability in confined workspaces or on close-quarters fastening applications
ModelNumber
Torque Range In Lbs (Nm) Voltage Battery
RequieredDrive Size
Free Speed
Overall Length
WeightLbs
Pistol Grip Models
BFT020FZ 4.4 - 17.7 (0.5 - 2) 9.6V 193531-1 or 193536-7 1/4” Hex 540 9-7/8” 2.9
BFT040FZ 8.9 - 35.4 (1 - 4) 9.6V 193531-1 or 193536-7 1/4” Hex 950 9-7/8” 2.9
BFT080FZ 26.6 - 70.8 (3 - 8) 9.6V 193531-1 or 193536-7 1/4” Hex 540 9-7/8” 2.9
BFT081FZ 26.6 - 70.8 (3 - 8) 12V 193929-8 or 193931-1 1/4” Hex 700 9-7/8” 3.5
BFT122FZ 44.3 - 106.0 (5 - 12) 9.6V 193531-1 or 193536-7 1/4” Hex 320 9-7/8” 2.9
BFT123FZ 44.3 - 106.0 (5 - 12) 12V 193929-8 or 193931-1 1/4” Hex 390 9-7/8” 3.5
ModelNumber Voltage Amp Hour
(Ah) Cell Type
Battery Models
193531-1 9.6V 2.0 (Ni-MH)
193536-7 9.6V 3.3 (Ni-MH)
193929-8 12V 2.0 (Ni-MH)
193931-1 12V 3.3 (Ni-MH)
193992-1 14V 2.7 (Ni-MH)
193355-1 14V 3.3 (Ni-MH)
Auto Battery Shutoff• Shuts off the tool when battery
capacity is less than 5%• Ensures consistent fastening
torqueIndication Lamp and Beeper• Precision sensor indicates
fastening sufficiency and bat-tery power conditions with light and/or beeping
Angle Models
BFL080FZ 17.7 - 70.8 (2 - 8) 9.6V 193531-1 or 193536-7 3/8” Sq 450 17” 3.3
BFL081FZ 17.7 - 70.8 (2 - 8) 12V 193929-8 or 193931-1 3/8” Sq 700 16-1/4” 3.5
BFL121FZ 44.3 - 106.0 (5 - 12) 12V 193929-8 or 193931-1 3/8” Sq 410 17” 3.3
BFL200FZ 71.0 - 177.0 (8 - 2) 12V 193929-8 or 193931-1 3/8” Sq 220 17” 3.3
BFL300FZ 142.0 - 266.0 (16 - 30) 14.4V 193992-1 or 193355-1 3/8” Sq 400 20” 5.3
BFL400FZ 221.0 - 354.0 (25 - 40) 14.4V 193992-1 or 193355-1 3/8” Sq 260 20-1/4” 5.5
ModelNumber Voltage Amp Hour
(Ah)
9.6V to 24V Charger
DC18RA 115V AC 1.3 - 3.3
Cordless Torque Screwdrivers
Assembly ToolsTorque Controlled Cordless Screwdrivers
Batteries
Battery Charger
www.FlexibleAssembly.com (800) 696-761414
Wireless S
crewdrivers
Assembly ToolsWireless Communication Screwdrivers
(((( ))))
))))• Tool Recognition through Wireless Receiver - Time/Date Stamp - Rundown Rotations - Tool ID Recognition - Batch Achievement - Fastening Angle Values - Fastening Torque Values - OK-NOK Parameter Achievement• Programming Interactivity through PC Software - Calibration Ability - Tool Brake Options - Soft Start Adjustment - Tool Lock Down Mode - Angle Value Tolerance Range - Torque Value Tolerance Range - Batch Management (PLC-Based) - Rundown Rotation Min/Max Settings• Certified accuracies within +/- 5%• Wireless communication via Bluetooth• Extreme Accuracy and Long-life Reliability• Provides Theft Deterence via Disabling Function• Each tool includes a built-in Bluetooth transmitter• Confirmation of Individual Parameter Achievement• Auto battery shutoff ensures consistent fastening torque• Wireless Communication of Torque, Angle and Rotation Values• Brushless Motor Design Reduces Engergy Consuption by up to 50%• Valuable Tool in Troubleshooting Manufacturing Fastening Processes• Traceability through Communication of Individual Fastening Characteristics
))))
RCV-02
BFT041RZ
BFL201RZ
Wireless Communication Screwdrivers
ModelNumber
Torque Range In Lbs (Nm) Voltage Battery
RequieredDrive Size
Free Speed
Overall Length
WeightLbs Tool Recognition
Pistol Grip Models
BFT041RZ 8.9 - 35.4 (1 - 4) 14.4V BL1430 (Lithium-Ion) 1/4” Hex 800 9-7/8” 2.9 OK-NOK (Only)
BFT082RZ 35.4 - 70.8 (4 - 8) 14.4V BL1430 (Lithium-Ion) 1/4” Hex 860 9-7/8” 2.9 All Parameters
BFT124RZ 44.3 - 106.0 (5 - 12) 14.4V BL1430 (Lithium-Ion) 1/4” Hex 600 9-7/8” 2.9 All Parameters
Angle Models
BFL201RZ 88.5 - 177.0 (10 - 20) 14.4V BL1430 (Lithium-Ion) 3/8” Sq 360 17” 3.3 All Parameters
BFL301RZ 141.6 - 265.5 (16 - 30) 14.4V BL1430 (Lithium-Ion) 3/8” Sq 260 17” 3.5 All Parameters
BFL402RZ 221.3 - 354.0 (25 - 40) 14.4V BL1430 (Lithium-Ion) 3/8” Sq 200 17” 3.3 All Parameters
ModelNumber Voltage Amp Hour
(Ah) Cell Type
Battery Models
BL1430 14.4V 3.0 (Li-Ion)
*All Makita Wireless System Tools Utilize a Makita-Built, Brushless Motor*BFT041RZ does not recognize torque, angle and rotation figures
ModelNumber Voltage Amp Hour
(Ah)
9.6V to 24V Charger
DC18RA 115V AC 1.3 - 3.3
Model Number Color Compatible Models
418425-8 Red BFT020FZ, BFT040FZ, BFT041RZ, BFT080FZ, BFT081FZ, BFT082RZ, BFT120FZ, BFT122FZ, BFT123FZ, BFT124RZ
418424-0 Blue BFT020FZ, BFT040FZ, BFT041RZ, BFT080FZ, BFT081FZ, BFT082RZ, BFT120FZ, BFT122FZ, BFT123FZ, BFT124RZ
418423-2 Yellow BFT020FZ, BFT040FZ, BFT041RZ, BFT080FZ, BFT081FZ, BFT082RZ, BFT120FZ, BFT122FZ, BFT123FZ, BFT124RZ
418065-2 Red BFL080FZ, BFL081FZ, BFL120FZ, BFL121FZ, BFL200FZ, BFL201RZ,
418064-4 Blue BFL080FZ, BFL081FZ, BFL120FZ, BFL121FZ, BFL200FZ, BFL201RZ,
418032-7 Yellow BFL080FZ, BFL081FZ, BFL120FZ, BFL121FZ, BFL200FZ, BFL201RZ,
Cordless Tool Impact Protectors
Battery Charger
Battery
www.FlexibleAssembly.com (800) 696-7614 15
Torque ProductsAutomated Fastener Systems
ModelNumber Screw Size Maximum
Screw Length Rate WeightLbs (Kg)
NJ-12-R17 #0-1 (1.7mm) .39 (10mm) 120 Screws/Min 7.0 (3.18)
NJ-23-R20 #1 (2.0mm) .75 (18mm) 120 Screws/Min 7.0 (3.18)
NJ-23-R26 #3 (2.6mm) .75 (18mm) 120 Screws/Min 7.0 (3.18)
NJ-23-R30 #4 (3.0mm) .75 (18mm) 120 Screws/Min 7.0 (3.18)
NJ-45-R35 #6 (3.5mm) .75 (18mm) 120 Screws/Min 7.0 (3.18)
NJ-45-R40 #6-8 (4.0mm) .75 (18mm) 120 Screws/Min 7.0 (3.18)
NJ-45-R50 #10 (5.0mm) .75 (18mm) 120 Screws/Min 7.0 (3.18)*Rails can be swapped out of the screw presenter to fit a variety of screw sizes
Automatic Screw PresenterModels include a modular design! A simple rail change and readjustment is all that’s necessary to change a unit for use with a variety of screw sizes. Change from one fastener to another in less than five minutes.
• Presents fastener to operator for easy magnetic or vacuum pickup • For #0 - #10 screws • Feed speed of up to 2 screws per second • Quick feed rate from oscillating hopper design • Large hopper holds about 1000 - 1500 fasteners
Specifications• Hopper Capacity: 1,200 pcs. (#4) • Dimensions (in): 5.1 X 8.5 X 5.3• Power: DC 12V, 500mA (AC adapter included)
Fast
ener
Sys
tem
s
**Please note we offer custom designed systems so please call us for additional assistance.
Automatic Screw Feed SystemsThese Automatic Screw Feed Systems are customized for your fasteners and specific applications, are completely automated, and deliver the fastener directly to the workpiece eliminating the manual handling of screws. The drive end can be outfitted with either pneumatic, electric, pistol grip, or inline (straight) tools.
• Up to two screws per second• Extra capacity hopper available• Soundproof enclosure provided• Includes automatic bowl shutoff• Optional torque & angle feedback for process verification• Screw presence sensor available as an added option
www.FlexibleAssembly.com (800) 696-761416
Assembly ToolsAutomated Fastener Systems
FAS-SC90 Screw CounterThe FAS-SC90 digital screw counting system is compatible with Ingersoll Rand electric screwdrivers. With a simple retrofit kit you can make any screwdriver part of a fully automated screw counting system. Detection of the signals from the electric screwdriver enables highly reliable fastening management. Function of the counter is integrated into one compact unit.
• No special tool required (Use your existing tools)• Low cost solution• 1 year warranty• Patent pending• No maintenance required• Model FAS-SC90 meets class 100 clean room specifications• Retrofit kit available for all new and existing screwdrivers.• Advanced screw counting model available with batch counting (FAS-SC90)• Operates on standard 115 volt AC current, no special power sources required• Precise counting feature only counts when the tool has reached the required torque spec• Ingersoll Rand compatible models: ES50T, ES60P, ES60T, ES70P, ES70T, ES80P, ES9OP, ES9OT, ES100P, and ES100T
ModelNumber Digital Counter Batch Counting LED Visual
Indicator
FAS-SC90A Yes Yes Yes
www.FlexibleAssembly.com (800) 696-7614 5
Desktop Torque Testers 18-19Torque Analyzers 20Calibration Systems 21Torque Screwdrivers 22-23Adjustable Torque Wrenches 24Interchangeable Heads 25Dial Indicating Torque Wrenches 26Electronic Torque Wrenches 27Torque Multipliers 28
Torque InstrumentsDesktop Torque Testers
Des
ktop
Tor
que
Test
ers
• RS-232 output• Visual limit alarms• Single-step access to all functions• Key-lock for tamper-proof operation• Rundown fixtures available through 1,000 Lb.ft • 3 modes of operation: Track, Peak, and 1st Peak • Bidirectional accuracy of ±0.5% of indicated reading• “Memory scroll” allows for data storage up to 999 readings• NiMH rechargeable batteries provide 8-10 hours of continuous use • Optional transducer mounting configuration (Vertical or Horizontal)• Can be calibrated to virtually any manufacturer’s strain gauge transducers • Eight (8) available engineering units: In Ozs, In Lbs, Ft Lbs, Nm, cNm, KgfCm, gfCm, Kgfm • Dedicated transducer integrated with system, available in vertical or horizontal mount positions • Selectable power tool filtering speeds: 125Hz, 250Hz, 500Hz, 1000Hz, 1500Hz and 2000Hz • For testing click, dial, and digital wrenches, plus most power tools including impulse and DC electric
ModelNumber
Torque Range Range Nm
Input Drive WeightLbs (Kg)
FAS-3001 10.0 - 100 In Oz 0.07 - 0.7062 1/4” Square Drive 5 Lbs (1.13)
FAS-3005 5.0 - 50 In Lbs 0.56 - 5.65 1/4” Square Drive 5 Lbs (1.13)
FAS-3010 10.0 - 100 In Lbs 1.13 - 11.3 1/4” Square Drive 5 Lbs (1.13)
FAS-3025 25.0 - 250 In Lbs 2.83 - 28.3 3/8” Square Drive 5 Lbs (1.36)
FAS-3050 50.0 - 500 In Lbs 5.65 - 56.5 3/8” Square Drive 5 Lbs (1.36)
Desktop Torque Tester
Unit includesBattery ChargerRundown Adaptor (Joint Simulator)N.I.S.T Certificate of CalibrationOperating Manual
**Please note that there are custom transducer configurations available. Contact us with any special requirements you have.
• RS-232 output• Visual limit alarms• Single-step access to all functions• Key-lock for tamper-proof operation• Rundown fixtures available through 1,000 Ft Lbs • 3 modes of operation: Track, Peak, and 1st Peak • Bidirectional accuracy of ±0.25% of indicated reading• “Memory scroll” allows for data storage up to 999 readings• NiMH rechargeable batteries provide 8-10 hours of continuous use • Optional transducer mounting configuration (Vertical or Horizontal)• Can be calibrated to virtually any manufacturer’s strain gauge transducers • Eight (8) available engineering units: In Ozs, In Lbs, Ft Lbs, Nm, cNm, KgfCm, gfCm, Kgfm • Dedicated transducer integrated with system, available in vertical or horizontal mount positions • Selectable power tool filtering speeds: 125Hz, 250Hz, 500Hz, 1000Hz, 1500Hz and 2000Hz • For testing click, dial, and digital wrenches, plus most power tools including impulse and DC electric• External transducer connection available to expand torque capacity with rotary or stationary transducers
Desktop Torque Tester
ModelNumber
Torque Range Range Nm
Input Drive WeightLbs (Kg)
FAS-50100 100 - 1000 In Lb 135.5 - 1355.8 3/8” Square Drive 5 Lbs (1.13)
FAS-5100 10 - 100 Ft Lb 13.55 - 135.58 1/2” Square Drive 5 Lbs (1.13)
FAS-5250 25 - 250 Ft Lb 33.89 - 338.95 1/2” Square Drive 5 Lbs (1.13)
FAS-5450 45.0 - 450 Ft Lb 61.01 - 610.12 1/2” Square Drive 5 Lbs (1.36)
FAS-51000 100 - 1000 Ft Lb 135.58 - 1355.82 1” Square Drive 5 Lbs (1.36)
**Please note that there are custom transducer configurations available. Contact us with any special requirements you have.
Rundown adapter available on units less than 1000 Ft Lb
External Transducer Port
Optional transducer mounting configuration (Horizontal or Vertical)
Optional transducer mounting configuration (Horizontal or Vertical)
Rundown adapter available on units less than 1000 Ft Lb
www.FlexibleAssembly.com (800) 696-761418
Torque InstrumentsDesktop Torque Testers
Desktop Torque Testers
www.FlexibleAssembly.com (800) 696-7614 19
Unit includesBattery ChargerRundown Adaptor (Joint Simulator)N.I.S.T Certificate of CalibrationOperating Manual
ModelNumber
Torque RangeIn Lbs / Ft Lbs
Range Nm
Input Drive WeightLbs (Kg)
FAS-QCI-010 1.0 - 10 In Lbs 0.13 - 1.13 1/4” Square Drive 2.5 Lbs (1.13)
FAS-QCI-050 5.0 - 50 In Lbs 0.56 - 5.65 1/4” Square Drive 2.5 Lbs (1.13)
FAS-QCI-100 10.0 - 100 In Lbs 1.13 - 11.30 1/4” Square Drive 2.5 Lbs (1.13)
FAS-QCT-150 15.0 - 150 Ft Lbs 20.3 - 203.3 1/2” Square Drive 3.0 Lbs (1.36)
FAS-QCT-1000 100.0 - 1000 Ft Lbs 135.5 - 1355.8 1” Square Drive 3.0 Lbs (1.36)
• Single-step access to all functions• RS232 port for downloading or printing• Dimensions: 3.25”(L) X 3.125”(W) X 3.75”(H)• 3 modes of operation: Track, Peak, and 1st Peak• Bidirectional accuracy of ±1% of indicated reading.• Machined aluminum case for extended life and durability• NiMH rechargeable batteries provide 8-10 hours of continuous use• Eight (8) available engineering units: In Ozs, In Lbs, Ft Lbs, Nm, cNm, KgfCm, gfCm, Kgfm • For testing click, dial, and digital wrenches, plus most power tools including impulse and DC electric
**Please note that there are custom transducer configurations available. Contact us with any special requirements you have.
• LED indicator shows active transducer • RS232 port for downloading and printing• Built-in switch for easy transducer selection • Large memory capacity for torque value storage• Selected transducer capacity is displayed on the torque readout • MTM-2 & MTM-4 Series are built with 2 or 4 torsion (transducer) shafts• All MTM modules are “Intellect” compatible, which means that they are plug and play compatible with all AWS series Intelect displays, including AWS-4050 • Standard accuracy of ± 0.5% of indicated, top 90% of full scale (Bidirectional)• Optional accuracy of ± 0.25% of indicated, top 90% of full scale (Bidirectional)• External transducer connection available to expand torque capacity (Available on request)• Optional extended calibration range of 5 - 100% of full scale optional (instead of 10-100%) • Can be used in conjuction with the FAS-650LTS for easy and accurace torque wrench calibration
ModelNumber
Torque RangeIn Lbs / Ft Lbs
Range Nm
Transducer 1 Transducer 2 Transducer 3 Transducer 4
MTMDP-2S 2.5 In Lbs - 250 Ft Lbs 0.28 - 339 2.5 - 25 In Lbs 25.0 - 250 In Lbs N/A N/A
MTMBP-4L 5.0 In Lbs - 750 Ft Lbs 0.56 - 1016.87 5.0 - 50 In Lbs 50.0 - 500 In Lbs 25.0 - 250 Ft Lbs 75.0 - 750 Ft Lbs
**Please note that there are custom transducer configurations available. Contact us with any special requirements you have.
Unit includesBattery ChargerRundown Adaptor (Joint Simulator)N.I.S.T Certificate of CalibrationOperating Manual
Desktop Torque Tester
Desktop Torque Tester
Rotates 90 degrees for optional transducer mounting configuration (Horizontal or Vertical)
Rundown adapter available on units less than 1000 Ft Lb
Selectable 4 port transducer switch
Up to 4 transducers available in one unit for wide torque range coverage
Dual transducer version available
Torque InstrumentsTorque Analyzers
Torq
ue A
naly
zers
www.FlexibleAssembly.com (800) 696-761420
• Visual limit alarms• Single-step access to all functions• RS-232 output for downloading data• Large memory for torque value storage• 3 modes of operation: Track, Peak and 1st Peak• Bidirectional accuracy of ±0.5% of indicated reading• Ideal for testing the torque of joints and tools throughout the facility• Portable, versatile, simple, and accurate through repeatable performance• NiMH rechargeable batteries provide at least 8-10 hours of continuous use• (8) available engineering units: In Ozs, In Lbs, Ft Lbs, Nm, cNm, KgfCm, gfCm, Kgfm • Slectable power tool filtering speeds: 125Hz, 250Hz, 500Hz, 1000Hz, 1500Hz and 2000Hz• For testing click, dial, and digital wrenches, plus most power tools including impulse and DC electric
ModelNumber
Torque RangeEnglish (Nm)
DepthInches
WidthInches
HeightInches Weight
FAS-4050 10.0 In Oz - 50,000 Ft Lbs ( .07 - 67791) 6.5 2.75 3.0 1.8
Designed to work with the FAS-4050 & FAS-5000 series torque analyzers and data collectors, these high-strength aluminum transducers mount bi-directionally to a benchtop. Optional overtorque protection rings prevent accidental transducer over-load on smaller transducers.
Our static transducers are offered in ranges from 10 In Ozs to 2,000 Ft Lbs, with ±0.5% (±0.25% optional) of indicated reading accuracy from 10% - 100% of the trans-ducer range. All transducers can be calibrated bi-directionally.*
We offer a wide range of strain gauged rotary transducers for bi-directional dynamic torque measurement. The unique design of this versatile product makes it possible to test pulse tools without being adversely affected by frequency, oscillations, or joint rate conditions. They are also the ideal solution for monitoring the output of standard torque-controlled nut runners.
These transducers are available in ranges from 10 Lb.in. to 1,000 Lb.ft., with an accuracy of ±1% of indicated reading from 20% - 100% of the transducer range. These transducers are designed for 3,000 RPM continuous operation.
Rotary Transducers
Bench Mounted Stationary Transducers
ModelNumber
Torque RangeEnglish (Nm)
Drive
ITI-10 1.0 - 10.0 In Lbs (.11 - 1.1 Nm) 1/4”
ITI-25 25.0 - 250 In Lbs (2.8 - 28 Nm) 1/4”
ITI-100 10.0 - 100.0 In Lbs (1.1 - 11.0 Nm) 1/4”
ITF-250 25.0 - 250 Ft Lb (34 - 338 Nm) 3/8”
ITF-600 60.0 - 600 Ft Lb (81 - 813 Nm) 3/4”
ITF-1000 100.0 - 1000 Ft Lb (135 - 1355 Nm) 1”**Please note that there are custom transducer configurations available. Contact us with any special requirements you have.
ModelNumber
Torque RangeEnglish (Nm)
Input Drive
OutputDrive
IRTI-50-HEX 10.0 - 50.0 In Lbs (.11 - 5.6 Nm) 1/4” Hex 1/4” Hex
IRTI-100 20.0 - 100.0 In Lbs (2.2 - 11.3 Nm) 1/4” Sq 1/4” Sq
IRTI-500 100 - 500 In Lbs (11.3 - 56.5 Nm) 3/8” 3/8”
IRTF-100 20.0 - 100 Ft Lb (27.1 - 135.5 Nm) 3/4” 3/4”
IRTF-1000 200.0 - 1000 Ft Lb (271.1 - 1355 Nm) 1” 1”**Please note that there are custom transducer configurations available. Contact us with any special requirements you have.
Torque Analyzer
MTM4 Torque Tester Not Included
Torque ProductsDesktop Torque Testers
Calibration S
ystems
ModelNumber
Maximum Capacity
Maximum Capacity
FAS-650LTS 650 Ft Lbs 881 Nm
• Incredibly durable steel construction• Load bench used to calibrate up to 650 Ft Lbs• For use with Dial, Click type, & Digital torque wrenches• Easy to operate - simply slide the carriage into position and turn the wheel
The FAS-650LTS provides an economical solution for calibrating your torque wrenches. By bringing your calibration in-house, you take control of the procedure and eliminate the downtime experienced by outsourcing your periodic calibrations. This combined with one of our desktop units creates a complete calibration system that verifies the accuracy any click, dial, and beam type torque wrenches up to 650 Ft Lbs. These systems ensure a safe and easy way to calibrate large torque wrenches in both clockwise and counterclockwise directions without introducing variations in the calibration process due to operator intervention.
Torque Wrench Loader
• For calibration up to 2000 Ft Lbs• Laboratory grade instrumentation• For use with all torque wrenches & power tools (non impact)• Most sophisticated system available in the industry includes -Digital monitor -Mechanical torque wrench loader -Roller cabinet -Full range transducers -Calibration arms & wheels -Weights & trays -Joint simulator -Software
The MULTITEST & SURETEST Torque, Force and Tension Calibration System are the most sophisticated systems available in the industry. These systems will test and calibrate most types of torque wrenches, torque screwdrivers, torque multipliers, cable tensiometers, tension and compression gauges and non-impact power tools such as nutrunners and electric screwdrivers.
The systems can be ordered several ways. Each system begins with the same three basic components: the Multitest or Suretest Digital Monitor, the Roller Cabinet and the 2000 ft.lb. Mechanical Loader. We offer three different systems, the “Premier”, the “Supreme” and the “Basic”. For a breakdown of individual components please contact us.
Complete Calibration Systems
ModelNumber
Maximum Capacity
Maximum Capacity
System Type
2000-1 2000 Ft Lbs 2712 Nm MultiTest Premier
2000-2 2000 Ft Lbs 2712 Nm MultiTest Supreme
2000-3 2000 Ft Lbs 2712 Nm MultiTest Basic
5000-1 2000 Ft Lbs 2712 Nm SureTest Premier
5000-2 2000 Ft Lbs 2712 Nm SureTest Supreme
5000-3 2000 Ft Lbs 2712 Nm SureTest Basic
Additional Features:• Automatic sensor recognition with “Smart” Transducers• Range: 5.0 In Ozs. to 2000 Ft Lbs of torque (bi-directional)• Accuracy (10% to 100% of range): +/- 0.25% of indicated value• Built-in, low profile serial printer• Date and time stamp for stored values• Statistical analysis performed on stored data• Programmable manual or automatic options for clear, store and print functions• Recall and review of stored torque values• Track, Peak, First Peak, Power Tool Modes• RS232C port, analog output• Eight Torque measurement units: in. oz., in. lb., ft. lb., Nm, dNm, cNm, mkg and cmkg• Six Force units: Ounce, Pound, Newton, deciNewton, Kilopound (Kilogram) and Gram• Automatic lock-up for transducer protection• All transducers supplied with certification• Individually serialized with matching certificate of calibration traceable to N.I.S.T.
Torque InstrumentsCalibration Systems
www.FlexibleAssembly.com (800) 696-7614 21
Accessories• PS5104 Color Coded End Caps -For use with pre-set screwdrivers -Differentiate torque values -Red, yellow, blue, green available*Not Compatible with the 1501TP or micro adjustable models
Torque InstrumentsPreset Torque Screwdrivers
Pre
set T
orqu
e S
crew
driv
ers
www.FlexibleAssembly.com (800) 696-761422
1/4”FemaleHexDrive
1/4”MaleSquareDrive
3/8”MaleSquareDrive
• 3 models available• Cam-over Torque Limiting Clutch• Rugged, lightweight aluminum body• May be ordered pre-set from factory• Automatic lock in counterclockwise direction• Optional N.I.S.T calibration certificate available• Meets Class 100 Clean Room Specifications• Accuracy: ± 6% of indicated value, CW, from 20% to 100% of full scale
ModelNumber
Torque RangeIn Lbs
Drive RangeNm
W X LInches
W X LMillimeters
Wt.Oz (G)
1501TPA-1 20 - 170 In Lb 1/4” Female Hex 2.0 - 20 1 x 5.25 25.4 X 133.3 25.4 X 133.3
1501TP-1 20 - 170 In Lb 1/4” Male Square 2.0 - 20 1 x 5.25 25.4 X 133.3 25.4 X 133.3
1502TP-1 20 - 170 In Lb 3/8” Male Square 2.0 - 20 1 x 5.25 25.4 X 133.3 25.4 X 133.3
Preset Torque Screwdriver
• 4 models available• Trilobular comfort grip• Cam-over Torque Limiting Clutch• Rugged, lightweight aluminum body• May be ordered pre-set from factory• Automatic lock in counterclockwise direction• Optional N.I.S.T calibration certificate available• Meets Class 100 Clean Room Specifications• Universal 1/4” Hex Bit Holder with Strong Rare Earth Magnet• Accuracy: ± 6% of indicated value, CW, from 20% to 100% of full scale
ModelNumber
Torque RangeIn Lbs / In Ozs
RangecNm
W X LInches
W X LMillimeters
Wt.Oz (G)
21SP 6.0 - 32.0 In Ozs 0.5 - 2.5 cNm 1.1 x 4.5 28 x 115 5.3 (165)
61SP 10.0 - 100 In Ozs 5.0 - 80.0 cNm 1.1 x 4.5 28 x 115 7.0 (218)
151SP 1.5 - 15.0 In Lbs 20.0 - 200.0 cNm 1.1 x 5.6 28 x 115 7.0 (218)
401SP 4.0 - 40.0 In Lbs 45.0 - 450.0 cNm 1.1 x 5.6 28 x 115 9.6 (299)
Cam-over torque limitingclutch for repeatabilityand accuracy
Comfortable shapeand non-slip gripprevents friction injuries
Permanently lubricatedinternal mechanism,never needs oil
Certified to the following industry specifications: ASME B107.14 M-1994and ISO 6789
Precise adjustment screwmakes setting torque easy
Industry standard 1/4” Hex receiver allows use of all standard drive bits (Phillips,Torx, etc.)
Preset Torque Screwdriver
• 6 models available• Trilobular comfort grip• Easy-to-read window scale• Rugged, lightweight aluminum body• N.I.S.T certificate of calibration included• Positive locking pull down adjustment knob• Automatic lock in counterclockwise direction• Meets Class 100 Clean Room Specifications• Universal 1/4” Hex Bit Holder with Strong Rare Earth Magnet• Accuracy: ± 6% of indicated value, CW, from 20% to 100% of full scale
ModelNumber
Torque RangeEnglish / Metric
IncrementsEnglish / Metric
W X LInches
W X LMillimeters
Wt.Oz (G)
61SM 20.0 - 100.0 In Ozs 1.0 In Ozs 1.1 x 5.5 28 x 140 6.8 (212)
151SM 3.5 - 15.0 In Lbs 0.2 In Lbs 1.1 x 6.25 28 x 159 8.0 (249)
401SM 5.0 - 40.0 In Lbs 0.5 In Lbs 1.2 x 6.75 30 x 172 10.8 (330)
61NSM 10.0 - 80.0 cNm 1.0 cNm 1.1 x 5.5 28 x 140 6.8 (212)
151NSM 40.0 - 200.0 cNm 2.0 cNm 1.1 x 6.25 28 x 159 8.0 (249)
401NSM 50.0 - 450.0 cNm 5.0 cNm 1.2 x 6.75 30 x 172 10.8 (330)
Easy-to-read window scale and adjustment knob forprecise settings
Micro Adjustable Torque Screwdriver
Torque Screw
drivers
www.FlexibleAssembly.com (800) 696-7614 23
Torque InstrumentsMicro Adjustable Torque Screwdrivers
Cam-over torque limiting clutch for repeatabilityand accuracy
Comfortable shapeand non-slip gripprevents friction injuries
Permanently lubricatedinternal mechanism,never needs oil
Industry standard 1/4” Hex receiver allows use of all standard drive bits (Phillips,Torx, etc.)
Certified to the following industry specifications: ASME B107.14 M-1994and ISO 6789
NIST certificate of calibration included
Torque InstrumentsAdjustable Torque Wrenches
B
A
D
C
ModelNumber
Torque RangeEnglish (Nm)
IncrementsEnglish (Nm)
Drive Size
AInches
BInches
CInches
DInches
Wt.Lbs
Inch Pound Models
501MRMH 10 - 50 In Lb (1.4 - 5.4 Nm) 1 (.06) 1/4” 10.15 1.06 0.93 1.06 0.85
1502MRMH 20 - 150 In Lb (2.8 - 15.3 Nm) 1 (.12) 3/8” 10.15 1.06 0.93 1.06 0.90
2502MRMH 30 - 250 In Lb (4.0 - 27.7 Nm) 1 (.12) 3/8” 11.25 1.06 0.93 1.06 0.95
7502MRMH 100 - 750 In Lb (14.1 - 81.9 Nm) 5 (.6) 3/8” 16.00 1.43 1.20 1.40 2.50
10002MRMH 150 - 1000 In Lb (19.8 - 110.2 Nm) 5 (.6) 3/8” 16.00 1.43 1.20 1.40 2.50
25003MRMH 300 - 2500 In Lb (39.6 -276.9 Nm) 10 (1.2) 1/2” 18.00 1.70 1.40 1.40 3.20
ModelNumber
Torque RangeEnglish (Nm)
Shank Size
AInches
BInches
CInches
DInches
Wt.Lbs
5T-I 10 - 50 In Lb (1.1 - 5.6) J 6.5 0.63 0.61 1.00 0.35
10T-I 50 - 250 In Lb (5.6 - 28) J 10 0.63 0.61 1.00 0.55
50T-I 15 - 75 Ft Lb (20 - 102) J 11 0.68 0.86 1.40 1.40
100T-I 30 - 150 Ft Lb (41 - 203) Y 19.5 0.94 0.86 1.40 2.30
200T-I 40 - 200 Ft Lb (54 - 271) Y 23.5 0.95 0.86 1.40 2.60
300T-I 100 - 300 Ft Lb (135 - 406) X 27.7 1.12 1.00 1.40 3.90
600T-I 120 - 600 Ft Lb (162 - 814) Z 55 1.50 1.25 1.25 10.45
• Dual scale, Calibrated dual directions• Fast, accurate, and easy to set• Easy-to-read Laser marked scales• Accuracy: ± 4% clockwise ± 6% CCW of indicated value, CW, from 20% to 100% of full scale• Most feature Quick Release buttons which provide good socket retention as well as easy socket removal• Individually serialized with matching certificate of calibration traceable to N.I.S.T.
• Uses universal round shank heads (see next page)• Featuring a durable, non-slip cushion grip• Audible click and feel impulse torque control mechanism• Tamper proof torque setting for production line use• Torque values can be calibrated in English or Metric setting• Accuracy: ± 3% of indicated value, in direction of torque indicator, from 20% to 100% of full scale
** NOTE: No grip supplied. ** NOTE: “X” and “Z” shank ends available on special order only. Contact our Sales Department.
* NOTE: 10005MFRMH supplied with one extension handle and is packed in a metal box.**NOTE: 20005MFMH supplied with two extension handles, fixed/non-ratcheted head and is packed in a sturdy cardboard box.
Foot Pound Models
752MFRMH 5 - 75 Ft Lb (10.2 - 98.3) .5 (.7) 3/8” 16.00 1.43 1.20 1.40 2.50
1002MFRMH 10 - 100 Ft Lb (16.9 - 132.2) .5 (.7) 3/8” 16.00 1.43 1.20 1.40 2.55
1503MFRMH 20 - 150 Ft Lb (34 - 197) 1 (1.4) 1/2” 19.00 1.70 1.40 1.40 3.15
2503MFRMH 30 - 250 Ft Lb (47 - 332) 1 (1.4) 1/2” 24.40 1.70 1.40 1.40 3.15
4004MFRMH 80 -400 Ft Lb (85 - 497) 5 (3.4) 3/4” 34.25 2.50 2.10 1.40 10.30
6004MFRMH 100 600 Ft Lb (169 -779) 5 (6.8) 3/4” 42.00 2.50 2.00 1.15 11.85
10005MFRMH* 200 - 1000 Ft Lb (305 - 1322) 5 (6.8) 1” 70.00 3.00 3.00 1.50 25.10
20005MFMH** 300 - 2000 Ft Lb (406 - 2711) 10 (13.5) 1” 108.5 3.15 4.25 1.65 48.75
Micro Adjustable Torque Wrenches
Preset Torque Wrenches
Shank Size DiametersJ = 0.425Y = 0.560X = 0.735Z = 0.990
Adj
usta
ble
Torq
ue W
renc
hes
www.FlexibleAssembly.com (800) 696-761424
Torque ProductsInterchangeable Heads
ModelNumber
Drive Size
Max Working Capacity
Shank Size
AInches (mm)
BInches(mm)
Repair Kit Part #
QJD-8 1/4” 350 In Lbs J 0.86 (21.84) 0.86 (21.84) RKRT936
QJD-12 3/8” 900 In Lbs J 1.14 (28.96) 1.24 (31.50) RKRT936
QJD-16 1/2” 900 In Lbs J 1.64 (41.66) 1.56 (39.62) RKRT936
QYD-16 1/2” 200 Ft Lbs Y 1.64 (41.66) 1.56 (39.62) RKRT936
QXD-24 3/4” 300 Ft Lbs X 2.48 (63.00) 2.18 (55.37) RKRQC4
QZD-24A 3/4” 600 Ft Lbs Z 2.48 (63.00) 2.18 (55.37) RKRQC4
QZD-32A 1” 600 Ft Lbs Z 3.12 (79.25) 2.64 (67.06) RKRQC4
Ratchet Head Drive
12 Point Box End Head
Plain Head Drive
ModelNumber
Drive Size
Max Working Capacity
Shank Size
AInches (mm)
BInches(mm)
QJSD-8 1/4” Sq 200 In Lbs J 0.48 (12.19) 1.25 (31.7)
QJSD-12 3/8” Sq 900 In Lbs J 0.62 (15.75) 1.50 (38.1)
QJSD-16 1/2” Sq 900 In Lbs J 0.62 (15.75) 1.50 (38.1)
QYSD-16 1/2” Sq 200 Ft Lbs Y 0.68 (17.27) 1.50 (38.1)
QXSD-24 3/4” Sq 200 Ft Lbs X 0.80 (20.32) 2.00 (50.8)
QZSD-24 3/4” Sq 600 Ft Lbs Z 0.93 (23.62) 2.50 (63.5)
QZSD-32 1” Sq 600 Ft Lbs Z 1.24 (31.50) 2.50 (63.5)
Open End Head
ModelNumber
Drive Size
Max Working Capacity
Shank Size
QJX-8 1/4” 220 In Lbs J
QJX-12 3/8” 490 In Lbs J
QJX-14 7/16” 715 In Lbs J
QJX-16 1/2” 900 In Lbs J
QJX-18 9/16” 900 In Lbs J
QJX-20 5/8” 900 In Lbs J
QJX-22 11/16” 900 In Lbs J
QJX-24 3/4” 900 In Lbs J
QJX-26 13/16” 900 In Lbs J
QJX-28 7/8” 900 In Lbs J
QJX-30 15/16” 900 In Lbs J
*Additional sizes are available through our website or please contact us directly for additional information.
ModelNumber
Drive Size
Max Working Capacity
Shank Size
QYX-16 1/2” 1020 In Lbs Y
QYX-18 9/16” 1340 In Lbs Y
QYX-20 5/8” 2050 In Lbs Y
QYX-22 11/16” 2400 In Lbs Y
QYX-24 3/4” 2400 In Lbs Y
QYX-26 13/16” 2400 In Lbs Y
QYX-28 7/8” 2400 In Lbs Y
QYX-30 15/16” 2400 In Lbs Y
QYX-32 1” 2400 In Lbs Y
QYX-36 1-1/8” 2400 In Lbs Y
QYX-38 1-3/16” 2400 In Lbs Y
*Additional sizes are available through our website or please contact us directly for additional information.
ModelNumber
Drive Size
Max Working Capacity
Shank Size
QJX-M8 8mm 265 In Lbs J
QJX-M9 9mm 355 In Lbs J
QJX-M10 10mm 630 In Lbs J
QJX-M11 11mm 710 In Lbs J
QJX-M12 12mm 805 In Lbs J
QJX-M13 13mm 900 In Lbs J
QJX-M14 14mm 900 In Lbs J
QJX-M15 15mm 900 In Lbs J
QJX-M17 17mm 900 In Lbs J
QJX-M19 19mm 900 In Lbs J
ModelNumber
Drive Size
Max Working Capacity
Shank Size
QJ0-8 1/4” 55 In Lbs J
QJ010 5/16: 110 In Lbs J
QJ012 3/8” 220 In Lbs J
QJ014 7/16” 310 In Lbs J
QJ016 1/2” 410 In Lbs J
QJ018 9/16” 695 In Lbs J
QJ020 5/8” 835 In Lbs J
QJ022 11/16” 900 In Lbs J
QJ024 3/4” 900 In Lbs J
QJ026 13/16” 900 In Lbs J
QJ028 7/8” 900 In Lbs J
QJ030 15/16” 900 In Lbs J
QJ032 1” 900 In Lbs J
QJ034 1-1/16” 900 In Lbs J
ModelNumber
Drive Size
Max Working Capacity
Shank Size
QY048 1-1/2” 2400 In Lbs Y
QY050 1-9/16” 2400 In Lbs Y
QY052 1-5/8” 2400 In Lbs Y
QY054 1-11/16” 2400 In Lbs Y
QY056 1-3/4” 2400 In Lbs Y
QJ0M8 8mm 120 In Lbs J
QJ0M9 9mm 170 In Lbs J
QJ0M10 10mm 265 In Lbs J
QJ0M11 11mm 400 In Lbs J
QJ0M12 12mm 430 In Lbs J
QJ0M13 13mm 495 In Lbs J
QY0M14 14mm 665 In Lbs Y
QY0M15 15mm 885 In Lbs Y
QY0M16 16mm 1060 In Lbs Y
QY0M17 17mm 1235 In Lbs Y
QY0M18 18mm 1375 In Lbs Y
QY0M19 19mm 1650 In Lbs Y
QY0M22 22mm 2400 In Lbs Y
QY0M24 24mm 2400 In Lbs Y
ModelNumber
Drive Size
Max Working Capacity
Shank Size
QJ036 1-1/8” 900 In Lbs J
QJ038 1-3/16” 900 In Lbs J
QJ040 1-1/4” 900 In Lbs J
QJ042 1-5/16” 900 In Lbs J
QJ044 1-3/8” 900 In Lbs J
QJ046 1-7/16” 900 In Lbs J
QJ048 1-1/2” 900 In Lbs J
QY024 3/4” 1500 In Lbs Y
QY026 13/16” 1965 In Lbs Y
QY028 7/8” 2310 In Lbs Y
QY030 15/16” 2400 In Lbs Y
QY032 1” 2400 In Lbs Y
QY034 1-1/16 2400 In Lbs Y
QY036 1-1/8” 2400 In Lbs Y
QY038 1-3/16” 2400 In Lbs Y
QY040 1-1/4” 2400 In Lbs Y
QY042 1-5/16” 2400 In Lbs Y
QY044 1-3/8” 2400 In Lbs Y
QY046 1-7/16” 2400 In Lbs Y
Interchangeable Heads
www.FlexibleAssembly.com (800) 696-7614 25
Torque InstrumentsInterchangeable Heads
Torque InstrumentsDial Indicating Torque Wrenches
B
C
D
A
*** NOTE: 6004LDFN and 10005LDFN include 1 Extension handle.*** NOTE: 6004LDFE and 10005LDFE include 1 Extension handle, indicating light and buzzer.*** NOTE: 20005LDFE is a “T” style wrench with 1” drive female head that can be used with a torque multiplier.Includes 5 piece handle assembly, indicating light and buzzer. Case not included.
ModelNumber
Torque RangeEnglish
Torque RangeNM
IncrementsEnglish (Nm)
Drive Size
AInches
BInches
CInches
DInches
Wt.Lbs (Kg)
151LDIN 0-15 In Lb 0-1.8 Nm .25 In Lb (.05 Nm) 1/4” 11.5 1.1 1.2 2.75 1.10
301LDIN 0-30 In Lb 0-3.5 Nm .5 In Lb (.1 Nm) 1/4” 11.5 1.1 1.2 2.75 1.10
751LDIN 0-75 In Lb 0-9 Nm 1 In Lb (.2 Nm) 1/4” 11.5 1.1 1.2 2.75 1.10
1502LDIN 0-150 In Lb 0-18 Nm 2 In Lb (.5 Nm) 3/8” 11.5 1.1 1.2 2.75 1.10
2502LDIN 0-250 In Lb 0-30 Nm 5 In Lb (.5 Nm) 3/8” 11.5 1.1 1.2 2.75 1.10
3002LDIN 0-300 In Lb 0-35 Nm 5 In Lb (1 Nm) 3/8” 11.5 1.1 1.2 2.75 1.10
6002LDIN 0-600 In Lb 0-70 Nm 10 In Lb (2 Nm) 3/8” 15 1.5 1.2 2.75 1.60
252LDFN 0-25 Ft Lb 0-35 Nm .5 Ft Lb (1 Nm) 3/8” 11.5 1.1 1.2 2.75 1.10
502LDFN 0-50 Ft Lb 0-70 Nm 1 Ft Lb (2 Nm) 3/8” 15 1.5 1.2 2.75 1.60
1003LDFN 0-100 Ft Lb 0-140 Nm 2 Ft Lb (2.5 Nm) 1/2” 21.75 2.25 1.50 2.75 3.70
1753LDFN 0-175 Ft Lb 0-240 Nm 5 Ft Lb (5 Nm) 1/2” 21.75 2.25 1.50 2.75 3.70
2503LDFN 0-250 Ft Lb 0-350 Nm 5 Ft Lb (10 Nm) 1/2” 21.75 2.25 1.50 2.75 3.70
3504LDFN 0-350 Ft Lb 0-480 Nm 10 Ft Lb (10 Nm) 3/4” 28 2.25 1.50 2.75 5.75
6004LDFN* 0-600 Ft Lb 0-800 Nm 10 Ft Lb (20 Nm) 3/4” 47 2.50 1.50 2.75 5.75
10005LDFN* 0-1000 Ft Lb 0-1400 Nm 20 Ft Lb (25 Nm) 1” 74 2.50 3.50 3.00 10.10
6004LDFE** 0-600 Ft Lb 0-800 Nm 10 Ft Lb (20 Nm) 3/4” 47 2.50 1.50 2.75 10.10
10005LDFE** 0-1000 Ft Lb 0-1400 Nm 20 Ft Lb (25 Nm) 1” 74 2.50 3.50 3.00 30.00
20005LDFE*** 0-2000 Ft Lb 0-2800 Nm 40 Ft Lb (50 Nm) 1” 122 3.50 6.50 3.75 47.00
20005LDFE “T” type DialWrench must be operatedby two persons or a torquemultiplier. The handle isover 10 ft. long.
Dial Indicating Torque Wrenches• Individually serialized with matching certificate of calibration traceable to N.I.S.T.• Large easy to read dial is shock resistant and protected by a tough metal guard• Accuracy: ± 4% of indicated value, CW & CCW, from 20% to 100% of full scale• Memory needle retains highest torque reading applied• Sturdy body construction ensures durability• Easy to Read Laser Marked Dual Scale• Calibrated in both CW and CCW directions• Plastic holding case included• 18 models available
Electric Signaling Modelsfeatures LED light and Buzzer (LDFE**)
Dia
l Ind
icat
ing
Wre
nche
s
www.FlexibleAssembly.com (800) 696-761426
Torque ProductsElectronic Torque Wrenches
BatteryIndicator
TorqueReading
BarGraph
Red, Green, Yellow LED Light Bar
Up/DownPreset
UnitsSelection
AudibleAlert CCW
IndicatorUnits Power/On
Zero
• Sleek New Design• 3 Color LED Light Bar• 15-Degree Flex Ratcheting Head• Push Button Socket Release Head• Large, Easy to Read Digital Display• Long Battery Life, Uses 2 Each CR123 Lithium Batteries• Ergonomically Designed Molded Non-Slip Rubber Grip• Torques in Both Clockwise and Counterclockwise Directions• Battery Saving Auto-Shutoff After Two Minutes• COMPUTORQ3 Remembers Last Unit and Torque Setting Selected• Audible Tone Sounds when Set Torque Value is Reached• ACCURACY: ± 2% CW of Readings from 20% to 100% of Full Scale± 3% CCW of Readings from 20% to 100% of Full Scale• N.I.S.T. Traceable Certificate of Calibration Included
ModelNumber
Torque RangeFt Lbs (Nm)
Drive LengthInches (mm)
Wt.Lbs (Kg)
2401CI3 2.0 - 20.0 Ft Lb (2.71 - 27.10 Nm) 1/4” 15.0 (381) 2.0 (.91)
1002CF3 5.0 - 100 Ft Lb (13.6 - 135.6 Nm) 3/8” 17.0 (432) 2.2 (1.0)
2503CF3 25.0 - 250.0 Ft Lb (33.8 - 338.0 Nm) 1/2” 27.0 (686) 3.5 (1.59)
ModelNumber
Torque RangeEnglish (Nm)
Drive LengthInches (mm)
Wt.Lbs (Kg)
501CI-II 5.0 - 50 In Lbs (.56 - 5.6 Nm) 1/4” 13.5 (343) 1.5 (.68)
2502CI-II 25.0 - 250 In Lbs (2.8 - 28 Nm) 3/8” 14.9 (378) 2.0 (.90)
502CF-II 5.0 - 50 Ft Lbs (6.8 - 67.7 Nm) 3/8” 14.9 (378) 2.0 (.90)
2503CF-II 25.0 - 250 Ft Lb (34 - 338 Nm) 1/2” 21.5 (546) 3.2 (1.45)
6004CF-II 60.0 - 600 Ft Lb (81 - 813 Nm) 3/4” 46.5 (1181) 9.5 (4.31)
10005CF-II 100.0 - 1000 Ft Lb (135 - 1355 Nm) 1” 74.0 (1880) 19.0 (8.61)
• Up to 4000 torque values can be stored in memory• Downloading capability to a printer/computer datalogger via RS232• Selectable modes of operation are “Peak Hold” and “Track”• Target torque values are easily programmed and viewed through the keypad• Available torque ranges from 5 In Lb to 1000 Ft Lb• All calibration data is stored in the microprocessor• A 9v alkaline battery is standard for 60 hours of operation• Selectable baud rate for downloading to a printer/computer/datalogger Options are 300, 600, 1200, 2400, 4800, 9600, or 19200• Accuracy: ± 1% of indicated value, CW & CCW, from 20% to 100% of full scale; ± 1%, plus 5 increments from 10% to 20% of full scale• N.I.S.T. Traceable Certificate of Calibration Included
Electronic Torque W
renches
Electronic Torque Wrench
Electronic Torque Wrench
www.FlexibleAssembly.com (800) 696-7614 27
Torque InstrumentsElectronic Torque Wrenches
• Backlash protection standard on most models• Torque reaction bar & reation plate included with higher torque models• Can be used to multiply the torque from air-driven (non-impact) wrenches• Allows operator safe and easy means of producing torque for job requirements• Precision planetary gear multiplies the operator’s input from standard torque wrenches• Designed where high torques are necessary for fastening or breaking out stubborn fasteners• Simply apply torque on the input side and receive and exponentially higher amount on output end
ModelNumber
Max Output TorqueFt Lbs (Nm)
InputCapacity
Gear Ratio TorqueRatio
Input Drive
OutputDrive
Overall Length
Head Height
Head Diameter
TM-290 750 (1016) 227 Ft Lb 4 to 1 3.3 to 1 1/2” 3/4” 8.5” 3.25 3”
TM-391 1200 (1627) 200 Ft Lb 6.3 to 1 6:0 to 1 1/2” 3/4” 20” 4” 4”
TM-392 2200 (2982) 162 Ft Lb 15.0 to 1 13.6 to 1 1/2” 1” 20” 5.75 4”
TM-393 3200 (4338) 173 Ft Lb 20.25 to 1 18.5 to 1 1/2” 1” 20” 6.5 4”
TM-394 5000 (6779) 189 Ft Lb 29.25 to 1 26.5 to 1 1/2” 1-1/2” 15” 8.75 6”
TM-395 8000 (10846) 154 Ft Lb 60 to 1 52.0 to 1 1/2” 1-1/2” 15.25” 10.75 6”
TM-492 2200 (1016) 162 Ft Lb 15 to 1 13.6 to 1 1/2” 1” 14” 5.5” 5”
TM-493 3200 (1627) 173 Ft Lb 20.25 to 1 18.5 to 1 1/2” 1” 14” 6.4” 5”
TM-750LW 1000 (1355) 275 Ft Lb - 3.6 to 1 1/2” 3/4” 22.5” 3.3” 3.5”
TM-1000 2000 (2711) 550 Ft Lb - 3.6 to 1 3/4” 1” 24” 4.4” 3.5”
TM-1500 4000 (5423) 1150 Ft Lb - 3.9 to 1 1” 1-1/2” 28.87” 6.2” 5.2”
TM-2000 8000 (10846) 1915 Ft Lb - 4.6 to 1 1” 1-1/2” 31” 6.25” 6.5”
TM-2500 12000 (16269) 2200 Ft Lb - 5.4 to 1 1” 2-1/2” 30” 7.25” 7.25”
Product Code DescriptionTM-391RSD - Replacement Sq Drive For TM-391TM-392RSD - Replacement Sq Drive For TM-392 and TM-492TM-393RSD - Replacement Sq Drive For TM-393 and TM-493TM-394RSD - Replacement Sq Drive For TM-394TM-395RSD - Replacement Sq Drive For TM-395
Torque Multipliers
REPLACEMENT SQUARE DRIVES FOR TORQUE MULTIPLIERS
TM-395
TM-492
TM-392
TM-290
www.FlexibleAssembly.com (800) 696-761428
Torque InstrumentsTorque Multipliers
Torq
ue M
ultip
liers
www.FlexibleAssembly.com (800) 696-7614 5
Torque Reaction Arms 30Tool Support Systems 31Tool Balancers 32Workstation Components 33Tool Accessories 34
Pistol
Workplace SystemsTorque Reaction Arms
Torq
ue R
eact
ion
Arm
s
QTA Torque Reaction Arm
ModelNumber
MaximumTorque
Ft Lb (Nm)
Weight CapacityLb (Kg)
Maximum Reach
Inches (mm)
Vertical Travel
Inches (mm)
Overall Height
Inches (mm)
QTA010 7.4 (10) 2.64 (1.20) 15.0 (381) 13.0 (330) 27.8 (706)
QTA020 20 (14.8) 5.0 (2.27) 20.0 (508) 14.5 (368) 31.8 (808)
QTA040 40 (29.5) 6.5 (2.95) 25.0 (635) 17.5 (445) 39.7 (1008)
QTA100 100 (73.8) 8.0 (3.63) 30.0 (762) 17.5 (445) 39.7 (1008)
QTA150 150 (110.6) 10.0 (4.54) 52 (1321) 22.0 (559) 78.7 (2000)
• Adjustable arm length• Reduces operator fatigue• For use with pneumatic and electric tools• Eliminates all torque reaction to the operator• Articulating arm provides a smooth an ergonomic operation• Provides 360 degree rotation to cover a complete workspace• Compatible with a variety of tool configurations such as angle, inline, & pistol grip• Ergonomic torque reaction arm helps reduce the effects of CTS (Carpel Tunnel Syndrome)
Spring balancer adjustseasily and offers effortlessvertical movement
Simple, proven designfor trouble-free set-upand dependability
Anodized aluminum bodydelivers toughness in alightweight design
Chrome plated pole pairedwith a self-lubricating bearingprovides unmatched durability
Adjustable reachfor easy use andconvenience whenlocating fasteners
Custom tool holderoptions enable seamlessintegration withIngersoll Rand QAand QE tools
Multiple tool holder optionssuch as right angle, swivel,and pistol grip (standardinline tool holder includedwith QTA models up to100 Nm capacity)
QTA020
**QTA150 is adjustable to mount to the floor or a bench and does not include a tool holder.
Right angle Rotating
Ingersoll Randangle or inline
Ingersoll Randpush to start
1/4” NPT
QTA Tool HoldersGeneric clamp-on, inline tool holders are provided with the QTA010, QTA020, QTA040, and QTA100 Torque Arms. Additional clamp-on style tool holder options are available for right angle and pistol tools; a 1/4” NPT threaded tool holder is available for low-torque inline air tools.
Ingersoll Rand tool holders are available for all torque arm models, and are recommended when using any Ingersoll Rand QE or QA tool. For proper tool holder selection, refer to specific part numbers provided in tables below.
Generic Tool holders are not available for arms 150 Nm and above.Flange mounting is recommended for inline tools with torque capacity above 40 Nm
Please note the tool diameter range for generic holders:QTA010: 25 – 40 mm (1”– 1.57”)QTA020 / QTA040 / QTA100:28 – 52 mm (1.1” – 2”)
Tool Holder QTA010 QTA020 QTA040 QTA100
Inline (included with arm) ITC010-1C ITC040-1C ITC040-1C ITC100-1C
Right Angle ATC010-1C ATC040-1C ATC040-1C ATC100-1C
Pistol PTC010-1C PTC040-1C PTC040-1C N/A
Rotating RTC010-1C RTC040-1C RTC040-1C N/A
1/4” NPT NTC010-1T N/A N/A N/A
Cable or air line clampskeeps work area clear andorganized (clamps areincluded with all QTA arms)
www.FlexibleAssembly.com (800) 696-761430
Workplace SystemsTool Support Systems
Tool Support S
ystems
• Corrosion resistant• Includes balancer hanger• Steel Construction with E-Coat • Flexible design rotates 360 degrees• Lightweight but durable for continuous duty• All arms are equipped with a trolley hanger for smooth motion of the tool
Model Number Height Length Capacity
FAS-TS30 42” 30” 15 Lbs
Bench ClampPart # 48732-1
Workstation Arm
Dual ball bearing joint construction for smoother movement and long life
Air regulator offers precision adjustment of resistance for perfect balance
Unique upper rail adjustment allows true vertical approach to any fastener - no cross-threading
• Reduces operator fatigue • Anodized aluminum finish• For use with pneumatic and electric tools• No metal-to-metal joints to create particle count• Resistance can be set to suit individual operator preference • Allows universal tool motion from side to side and front to back• Provides consistency and accuracy for repetitive assembly tasks• 2-piece hinged forearm allows more freedom of movement in the assembly process• Telescoping reach from end of forearm allows easy adjustment in 1-inch increments• Two-piece hinged forearm allows more freedom of movement in the assembly process• Telescoping reach from end of forearm allows easy adjustment in one-inch increments up to six inches
ModelNumber Style Reach Weight
CapacityMaximum
Torque
Air Cylinder Series
FAS-S015 Standard 4” - 33” 15 Lbs 110 In Lbs
FAS-P015 Parallel 4” - 33” 15 Lbs 110 In Lbs
Oil Cylinder Series
FAS-S030 Standard 4” - 33” 3.0 Lbs 110 In Lbs
FAS-P030 Parallel 4” - 33” 3.0 Lbs 110 In Lbs
Wrist bracket “V” for electric tool mount. Part # TA-1202
Wrist bracket “V” for electric tool mount. Part # TA-1204
Right angle tool mount for pistol grip. Part # TA-1201
Torque Reaction Arm
www.FlexibleAssembly.com (800) 696-7614 31
ModelNumber
CapacityLbs (Kg)
WeightLbs (Kg)
TravelFt (mm)
BLD-1 .9 - 2.2 (.4 - 1) 1.3 (0.6) 5.2 (1600)
BLD-2 2.2 - 4.4 (1 -2) 1.3 (0.6) 5.2 (1600)
BLD-3 4.4 - 6.6 (2 - 3) 1.3 (0.7) 5.2 (1600)
ModelNumber
CapacityLbs (Kg)
WeightLbs (Kg)
TravelFt (mm)
BMDLL-4 4.4 - 8.8 (2-4) 6.6 (3.0) 8.2 (2500)
BMDLL-6 8.8 - 13.2 (4-6) 7.3 (3.3) 8.2 (2500)
BMDLL-8 13.2 - 17.6 (6-8) 7.9 (3.6) 8.2 (2500)
BMDLL-10 17.6 - 22.0 (8-10) 8.4 (3.8) 8.2 (2500)
ModelNumber
CapacityLbs (Kg)
NPTFitting
TravelFt (mm)
BHR-8 .9 - 1.8 (.4-.8) 1/4” 4.3 (1300)
BHR-15 1.5 - 3.3 (.7 - 1.5) 1/4” 4.3 (1300)
BHR-25 2.6 - 5.5 (1.2-2.5) 1/4” 4.3 (1300)
ModelNumber
CapacityLbs (Kg)
WeightLbs (Kg)
TravelFt (mm)
BSD-20 33 - 44 (15-20) 42 (19) 8.2 (2500)
BSD-30 44 - 66 (20-30) 44 (19.8) 8.2 (2500)
BSD-40 66 - 88 (30-40) 46 (20.8) 8.2 (2500)
BSD-50 88 - 110 (40-50) 53 (23.9) 8.2 (2500)
BSD-60 110 - 132 (50-60) 56 (25.4) 8.2 (2500)
• Self lubricating bushings• Auxiliary safety suspension• Protect your tool investment • Increase operator productivity • Adjustable capacity and stroke limiting device
Spring Type • Self lubricating bushings• Auxiliary safety suspension• Protect your tool investment • Increase operator productivity • Adjustable capacity and stroke limiting device• Locking Type, Pull to set - Pull again to release
Locking Type
• Self lubricating bushings• Auxiliary safety suspension• Protect your tool investment • Increase operator productivity • Eliminate the use of extra hoses• Adjustable capacity and stroke limiting device
Hose Reel
Workplace SystemsTool Balancers
Super Duty Spring Balancers• Anti-friction cable guide• Cable visible for inspection• Alignable rotating upper hook• Other sizes available on request• Worm screw capacity adjustment• Cable replacement without balancer disassembly• Precision guided cable winding prevents jamming• Manual locking device for instant clamping or release• Optional floor controlled locking device available (BIL-7343)• Safety device prevents load dropping due to spring breakage
This air unit offers an incredible 2 to 50 pound (.9 to 22 kg) load capacity, a range our competitors achieve only with numerous models designed for individual load weight. Designed and manufactured in the United States, the 50 lbBalancer offers numerous other benefits over spring operated units, including our exclusive flotation feature.
• Requires air hookup (can be tied into tooling air supply)• Simple adjustment in seconds by means of external regulator• Requires only 20 inches (508 mm) from bottom of rail to bottom of hook• Can be sequenced via air signal to perform timed or “stepped” operation• Virtually maintenance-free. Normal maintenance can be done in-place on the rail• Float action provides ease of vertical travel, eliminating tension on load, making positioning capability far superior • No need to change model when making tool change; one model (BAW005060) covers entire 50 lb (22 kg) range
Pneumatic Tool Balancer
Model Number Capacity Travel Weight
BAW005060 50 Lbs (22 Kg) 5.0 Ft (1524mm) 20 Lbs (9 Kg)
Tool
Bal
ance
rs
www.FlexibleAssembly.com (800) 696-761432
Workplace SystemsTool Support Systems
Workstation C
omponents
Workplace SystemsWorkstation Components
TRACKSteel with beige polyester finish.Use for vertical and horizontal workstation support.
Part Number 30Lb Capacity TrackAT3-3 3 ft trackAT3-4 4 ft trackAT3-6 6 ft trackAT3-9* 9 ft trackPart Number 50Lb Capacity TrackAT5-3 3 ft trackAT5-4 4 ft trackAT5-6 6 ft trackAT5-9* 9 ft trackAT5-12* 12 ft track
TRACK NUT: ATN-3/5Zinc plated steel. Use to attachaccessories to track, as end stops,or to isolate rolling accessories.Fits both 50# & 30# track.
END STOP: AES-3/5Zinc oxide finish. Use toprevent balancer trolleyfrom “overtraveling” thehorizontal track.
MOUNTING PLATE: AMP-5Black polyester finish.Use as a base to mountvertical uprights.
END CAP: AEP-3/5Black molded vinyl. Useto cap track ends for aprofessional finish. AEP-3 for 30 lb track AEP-5 for 50 lb track
ANGLE BRACKET: AB-3/5Black polyester finish.Use to mount horizontaltrack to vertical track.Fits both 50# and 30# track.
JOINT HANGERBRACKET: AJH-3/5Black polyester finish. Useto couple and hangend-to-end track. AJH - 3 for 30 lb track AJH - 5 for 50 lb track
BALANCER TROLLEY: ABT-3/5Black polyester finish.Use as moving supportfor tool balancers, hose andcable. Quality ball bearingwheels for long life andsmooth tracking. ABT-3 for 30 lb track (1.00 dia) ABT-5 for 50 lb track (1.25 dia)
HANGER BRACKET: AHB-3/5Black polyester finish.Use to suspend trackat right angle. AHB-3 for 30 lb AHB-5 for 50 lb
INTERMEDIATE CARRIER:AIC3-2 (30 lb track)AIC5-2 (50 lb track)Black polyester finish.Use for moving cableor hose festoon. Supportshose cable OD .60-.94
U-BOLTS: AUB-5Zinc plated steel.Use to secure boom bracket or any flat metal plate to AVC-5 (sold as each).
END CLAMP: AEC5-2Black polyester finish.Use as end stop with hose carrier forfestoon. Cable/hose OD .60-.94
SUPPORT CLAMPS: ASC-3/5Black polyester finish.Use as additional support for track. ASC-3 for 30 lb track ASC-5 for 50 lb track
ROLLING HANGER: ABT5-RBlack polyester finish.Use as support for rolling track.Allows X/Y axis movement, includesball bearing wheels.
90° CONNECTOR FOR 3/8” HOSE: WSCH3/8” I.D. Brass.Use to provide stable transfer point fromair line to tool. 90 degree connectorattaches to ABT-5.
www.FlexibleAssembly.com (800) 696-7614 33
Tool
Acc
esso
ries
Model Number
Dimensions(ODxIDxLength
Max Pressure NPT Fitting
TB-14-10-RS 3/8” x 1/4” x 8’ 160 PSI 1/4”
TB-14-15-RS 3/8” x 1/4” x 12’ 160 PSI 1/4”
TB-14-25-RS 3/8” x 1/4” x 20’ 160 PSI 1/4”
TB-38-15-RS 9/16” x 3/8” x 12’ 160 PSI 3/8”
TB-38-25-RS 9/16” x 3/8” x 20’ 160 PSI 3/8”
Model Number Air Flow Max Pressure NPT Fitting
C28121-800 44 CFM 250 PSI 1/4”
C28231-800 100 CFM 175 PSI 3/8”
Complete Filter Regulator & Lubricator (FRL)
Polyurethane Spiral Hose• Lightweight• Non-Kinking• Abrasive Resistant• Thread Sealant on all male fittings
• Removes debris• Removes moisture• Polycarbonate Bowl• Includes mounting bracket• Includes pressure guage• Applies constant lubrication• Extends the life of your air tools
Model Number Size
10G 1.0 Gal
10P 1.0 Pt
10Z4 4.0 Oz
• Class 1, #10 oils • Applies constant lubrication• Extends the life of your air tools• Superior protection for tool investment• Keeps o-rings & air motor blades properly lubricated• Recommended for use with percussive, assembly & impact wrenches
*MSDS sheet available upon request
Air Tool Oil
Model Number Inlet Outlet Type
NFAP-N1M-UA 1/4” MNPT 1/8” MNPT Industrial Interchange
NFAN2M-N2M 1/4” MNPT 1/4” MNPT Industrial Interchange
• Steel dust cover protects rotating joint• 360° circular rotation and 45° angled rotation• Thread sealant is supplied on all male fittings• Nickel-plated steel construction for long service life• Two rotation points prevent kinking of the supply line• Helps alleviate carpal tunnel syndrome and back stress resulting in fewer lost-time injuries
Model Number Inlet Thread Outlet Type
4X672 1/4” MNPT 1/8” MNPT Industrial Interchange
2X169 1/4” MNPT 1/4” MNPT Industrial Interchange
1HNL5 1/4” MNPT 3/8” MNPT Industrial Interchange
Quick Connect Swivel Fittings
Quick Connect Coupler Fittings• Zinc plated steel• Convenient and reliable method for changing between air tools• Push to connect style for easy connect & disconnection operation
www.FlexibleAssembly.com (800) 696-761434
Workplace SystemsTool Accessories
www.FlexibleAssembly.com (800) 696-7614 5
Impact Sockets 36Nutsetters 37Adapters 37Bit Sets 37Power Bits 38
Bits & Fastener ToolsImpact Sockets
www.FlexibleAssembly.com (800) 696-761436
ModelNumber
Output Size
Type D1in (mm)
D2in (mm)
Tin (mm)
Lin (mm)
1/4” Drive SAE (in)
S62H316L 3/16 C 0.33 (8.5) 0.51 (13) 0.19 (5) 1.96 (50)
S62H732L 7/32 C 0.37 (9.5) 0.51 (13) 0.19 (5) 1.96 (50)
S62H14L 1/4 C 0.40 (10.3) 0.51 (13) 0.19 (5) 1.96 (50)
S62H932L 9/32 C 0.44 (11.3) 0.51 (13) 0.27 (7) 1.96 (50)
S62H516L 5/16 C 0.49 (12.5) 0.51 (13) 0.27 (7) 1.96 (50)
S62H1132L 11/32 B 0.55 (14) 0.55 (14) 0.27 (7) 1.96 (50)
S62H38L 3/8 B 0.63 (16) 0.63 (16) 0.31 (8) 1.96 (50)
S62H716L 7/16 B 0.66 (17) 0.66 (17) 0.31 (8) 1.96 (50)
S62H12L 1/2 B 0.74 (19) 0.74 (19) 0.31 (8) 1.96 (50)
S62H916L 9/16 B 0.78 (20) 0.78 (20) 0.31 (8) 1.96 (50)
3/8” Drive SAE (in)
S63H516L 5/16 A 0.49 (12.5) 0.74 (19) 0.47 (12) 2.48 (63)
S63H38L 3/8 A 0.57 (14.5) 0.74 (19) 0.55 (14) 2.48 (63)
S63H716L 7/16 A 0.66 (17) 0.74 (19) 0.66 (17) 2.48 (63)
S63H12L 1/2 B 0.74 (19) 0.74 (19) 0.66 (17) 2.48 (63)
S63H916L 9/16 B 0.78 (20) 0.78 (20) 0.66 (17) 2.48 (63)
S63H58L 5/8 B 0.94 (24) 0.94 (24) 0.66 (17) 2.48 (63)
S63H1116L 11/16 B 0.94 (24) 0.94 (24) 0.66 (17) 2.48 (63)
S63H34L 3/4 B 1.02 (26) 1.02 (26) 0.74 (19) 2.48 (63)
S63H1316L 13/16 B 1.18 (30) 1.18 (30) 0.74 (19) 2.48 (63)
S63H78L 7/8 B 1.26 (32) 1.26 (32) 0.74 (19) 2.48 (63)
S63H1516L 15/16 B 1.33 (34) 1.33 (34) 0.82 (21) 2.48 (63)
S63H1L 1 B 1.41 (36) 1.41 (36) 0.82 (21) 2.48 (63)
B C
ModelNumber
Output Size
Type D1in (mm)
D2in (mm)
Tin (mm)
Lin (mm)
1/4” Drive Metric (mm)
S62M4L 4 C 0.29 (7.6) 0.51 (13) 0.19 (5) 1.96 (50)
S62M45L 4.5 C 0.32 (8.2) 0.51 (13) 0.19 (5) 1.96 (50)
S62M5L 5 C 0.34 (8.8) 0.51 (13) 0.19 (5) 1.96 (50)
S62M55L 5.5 C 0.37 (9.5) 0.51 (13) 0.19 (5) 1.96 (50)
S62M6L 6 C 0.39 (10) 0.51 (13) 0.27 (7) 1.96 (50)
S62M7L 7 C 0.44 (11.3) 0.51 (13) 0.27 (7) 1.96 (50)
S62M8L 8 C 0.49 (12.5) 0.51 (13) 0.27 (7) 1.96 (50)
S62M9L 9 B 0.57 (14.5) 0.57 (14.5) 0.27 (7) 1.96 (50)
S62M10L 10 B 0.63 (16) 0.63 (16) 0.27 (7) 1.96 (50)
S62M11L 11 B 0.66 (17) 0.66 (17) 0.31 (8) 1.96 (50)
S62M12L 12 B 0.66 (17) 0.66 (17) 0.31 (8) 1.96 (50)
S62M13L 13 B 0.74 (19) 0.74 (19) 0.31 (8) 1.96 (50)
S62M14L 14 B 0.78 (20) 0.78 (20) 0.31 (8) 1.96 (50)
S62M15L 15 B 0.82 (21) 0.82 (21) 0.31 (8) 1.96 (50)
A
3/8” Drive Metric (mm)
S63M7L 7 A 0.45 (11.5) 0.74 (19) 0.43 (11) 2.48 (63)
S63M8L 8 A 0.49 (12.5) 0.74 (19) 0.47 (12) 2.48 (63)
S63M9L 9 A 0.55 (14) 0.74 (19) 0.55 (14) 2.48 (63)
S63M10L 10 A 0.59 (15) 0.74 (19) 0.55 (14) 2.48 (63)
S63M11L 11 A 0.66 (17) 0.74 (19) 0.66 (17) 2.48 (63)
S63M12L 12 B 0.70 (18) 0.74 (19) 0.66 (17) 2.48 (63)
S63M13L 13 B 0.74 (19) 0.74 (19) 0.66 (17) 2.48 (63)
S63M14L 14 B 0.78 (20) 0.78 (20) 0.66 (17) 2.48 (63)
S63M15L 15 B 0.86 (22) 0.86 (22) 0.74 (19) 2.48 (63)
S63M16L 16 B 0.94 (24) 0.94 (24) 0.74 (19) 2.48 (63)
S63M17L 17 B 0.94 (24) 0.94 (24) 0.74 (19) 2.48 (63)
S63M18L 18 B 1.02 (26) 1.02 (26) 0.74 (19) 2.48 (63)
S63M19L 19 B 1.02 (26) 1.02 (26) 0.82 (21) 2.48 (63)
S63M20L 20 B 1.10 (28) 1.10 (28) 0.82 (21) 2.48 (63)
1/2” Drive SAE (in)
S64H516L 5/16 A 0.55 (14) 0.86 (22) 0.39 (10) 3.07 (78)
S64H38L 3/8 A 0.66 (17) 0.86 (22) 0.55 (14) 3.07 (78)
S64H716L 7/16 A 0.70 (18) 0.86 (22) 0.55 (14) 3.07 (78)
S64H12L 1/2 A 0.78 (20) 0.86 (22) 0.55 (14) 3.07 (78)
S64H916L 9/16 A 0.86 (22) 0.94 (24) 0.55 (14) 3.07 (78)
S64H58L 5/8 B 0.94 (24) 0.94 (24) 0.55 (14) 3.07 (78)
S64H1116L 11/16 B 1.02 (26) 1.02 (26) 0.66 (17) 3.07 (78)
S64H34L 3/4 B 1.10 (28) 1.10 (28) 0.66 (17) 3.07 (78)
S64H1316L 13/16 B 1.18 (30) 1.18 (30) 0.66 (17) 3.07 (78)
S64H78L 7/8 B 1.26 (32) 1.26 (32) 0.74 (19) 3.07 (78)
1/2” Drive Metric (mm)
S64M8L 8 A 0.55 (14) 0.86 (22) 0.43 (11) 3.07 (78)
S64M9L 9 A 0.59 (15) 0.86 (22) 0.55 (14) 3.07 (78)
S64M10L 10 A 0.66 (17) 0.86 (22) 0.55 (14) 3.07 (78)
S64M11L 11 A 0.70 (18) 0.86 (22) 0.55 (14) 3.07 (78)
S64M12L 12 A 0.74 (19) 0.86 (22) 0.55 (14) 3.07 (78)
S64M13L 13 A 0.78 (20) 0.94 (24) 0.55 (14) 3.07 (78)
• Electro-phosphate finish• Laser-etched size labeling• Backed by a Lifetime Warranty• Forged for high-strength durability• Designed for high torque applications• Offered in 6 point, deep length – Metric & SAE
Impact Sockets
Select From Additional Impact Accessories• Extensions• Adapters• Universal Sockets• Standard & Deep Sockets
*Lifetime Warranty on all sockets from manufacturing and material defects
Impa
ct S
ocke
ts
Specialty B
its & A
ccessories
AccessoriesBits & Fastener Tools
www.FlexibleAssembly.com (800) 696-7614 37
Head Size
2-9/16” LengthPart #
3/16” 81477
1/4” 73328
9/32” 81478
5/16” 73329
11/32” 81479
3/8” 73330
7/16” 87929
1/2” 79880
9/16” 79881
5/8” 79882
Standard Magnetic Standard Non Magnetic
Head Size
2-9/16” LengthPart #
3/16” 81472
1/4” 81215
9/32” 81473
5/16” 81216
11/32” 81474
3/8” 81217
7/16” 81218
5/8” 81219
Head Size
2-9/16” LengthPart #
2.5mm 81466
3mm 88931
4mm 88932
5mm 88933
6mm 88934
7mm 88935
8mm 88936
9mm 88937
10mm 88938
11mm 88939
12mm 88940
Metric Magnetic Metric Non Magnetic
Head Size
2-9/16” LengthPart #
2.5mm 81240
3mm 81241
4mm 81242
5mm 81243
6mm 81244
7mm 81245
8mm 81246
9mm 81247
10mm 81248
InnerDiameter Color Part #
3/16” Red 81199
1/4” Blue 81200
5/16” Yellow 81201
Magnetic Collars
Holder Drive Drive Length Part #
1/4” Female 1/4” Hex 3.0” 79371
Holder Drive Drive Length Part #
1/4” Female 1/4” Hex 3.0” 86387
Bit Holders & Extensions Bit Adapters
Round Shank Size Part # Brand
4mm DLW-4100 Ingersoll Rand / Delvo
4mm 64327 HIOS
5mm 64339 HIOS
Adapter Drive Drive Part #
1/4” Sq 1/4” Hex 81422
3/8” Sq 1/4” Hex 73480
1/2” Sq 1/4” Hex 86296
Model Number Bit Style Bit Sizes (2 each) Bit Length
FAS-10AMBS Socket (Metric) 1.5mm, 2mm, 2.5mm, 3mm, 4mm 2”
FAS-10ASBS Socket (Standard) 3/32, 7/64, 1/8, 9/64, 5/32 2”
FAS-10PBS Phillips #00, #0, #1, #2, #3 2”
FAS-10SBS Slotted #0-1, #1-2, #3-4, #4-5, #5-6 2”
FAS-10TBS Torx T3, T4, T5, T6, T7 2”
Power Bit Sets
FAS-10ASBS
Bits & Fastener ToolsNutsetters, Adapters, & Bit Sets
Bits & Fastener ToolsPower Bits
Pow
er B
its
1/4” Hex Drive Power Bits
Point Size
2” LengthPart #
3” LengthPart #
4” LengthPart #
6” LengthPart #
00 77018 77021 - 77024
0 03360 77022 79926 73440
1 73337 73341 79927 73345
2 77019 73342 79928 73346
3 73339 73343 79929 73347
Phillips Power Bits
Point Size
2” LengthPart #
3” LengthPart #
6” LengthPart #
T3 80086 - -
T4 87528 - 81012
T5 32504 81010 81011
T6 32505 77058 77059
T7 32502 32302 32602
T8 32202 32303 32603
T9 32203 32304 32604
T10 73220 32305 32605
T15 73221 32306 32606
T20 73222 32307 32607
T25 73223 32308 32608
Torx Power Bits
Point Size
2” LengthPart #
6” LengthPart #
0 - 1 86039 77069
1 - 2 77046 77050
3 - 4 73505 35034
4 - 5 73506 35035
5 - 6 86256 86225
6 - 8 73350 35036
8 - 10 73351 35037
10 - 12 73352 35038
12 - 14 73520 35039
Slotted Power Bits
Point Size
2” LengthPart #
3-1/2” LengthPart #r
6” LengthPart #
1/16” 77230 - 79671
5/64” 77231 - 79357
3/32” 73211 79822 79358
7/64” 73212 79823 79359
1/8” 73213 79824 79360
9/64 73214 79825 79361
5/32” 73215 79826 79362
11/64” 75001 - -
3/16” 73216 79827 79363
13/64” 81957 - -
7/32” 73217 79828 79364
1/4” 73218 79829 79365
Socket Head Power Bits (Standard)
Point Size
2” LengthPart #
6” LengthPart #
1.27mm 77010 -
1.5mm 79272 -
2.0mm 79273 81955
2.5mm 79274 -
3.0mm 79275 -
4.0mm 79276 81946
5.0mm 79277 75002
6.0mm 79278 75003
7.0mm 35688 81947
8.0mm 79279 81948
9.0mm 35689 81949
10.0mm 79280 81950
Socket Head Power Bits (Metric)
Point Size
2” LengthPart #
3-1/2” LengthPart #
T8 80637 80645
T10 80638 80646
T15 80639 80647
T20 80640 80648
T25 80641 80649
T27 80642 80650
T30 80643 80651
TORX Plus Power Bits
Point Size
2” LengthPart #
3-1/2” LengthPart #
T6 80747 80748
T7 77070 80749
T8 73251 80750
T9 73252 80751
T10 73253 80752
T15 73254 80753
T20 73255 80754
T25 73256 80756
T27 73257 80757
T30 73258 80758
TORX Security Power Bits
Point Size
1” LengthPart #
00 77011
0 77012
1 88226
2 73333
3 73334
Phillips Insert Bits
Point Size
1” LengthPart #
T3 80085
T4 87527
T5 81206
T6 77057
T7 32402
T8 32210
T9 32211
T10 32212
T15 50338
Torx Power BitsPoint Size
1” LengthPart #
0 - 1 86038
2 - 3 35041
4 - 5 73500
6 - 8 73501
8 - 10 73502
Slotted Power Bits
Point Size
1” LengthPart #
1.5mm 79846
2.0mm 79847
2.5mm 79848
3.0mm 79849
4.0mm 79850
5.0mm 79851
6.0mm 79852
7.0mm 79853
8.0mm 79854
9.0mm 81956
10.0mm 79855
Socket Head Power Bits (Metric)
1/4” Hex Drive Insert Bits
Point Size
1” LengthPart #
1/16” 77006
5/64” 79246
3/32” 79246
1/8” 79249
9/64 79250
5/32” 79251
3/16” 79252
7/32” 79253
1/4” 79254
Socket Head Power Bits (Standard)
www.FlexibleAssembly.com (800) 696-761438
Foot Pounds – ft. lbs.Inch Pounds – in. lbs.Inch Ounces – in. ozs.Newton Meter – NmCenti-Newton Meter – cNmMeter Kilogram – Mkg
Common Torque Abbreviations
Easy-to-use TorqueConversion Table
To Convert From
To Convert To
Multiply By
In Oz In Lb 0.0625
In Lb In Oz 16
In Lb Ft Lb 0.08333
In Lb CmKg 1.1519
In Lb mKg 0.011519
In Lb Nm 0.113
In Lb dNm 1.13
Ft Lb In Lb 12
Ft Lb MKg 0.1382
Ft Lb Nm 1.356
dNm In Lb 0.885
dNm Nm 0.10
Nm dNm 10
Nm CmKg 10.2
Nm mKg 0.102
Nm In Lb 8.85
Nm Ft Lb 0.7376
CmKg In Lb 0.8681
CmKg Nm 0.09807
mKg In Lb 86.81
mKg Ft Lb 7.236
mKg Nm 9.807
Screw Torque GuideTorquing values for screws are offered as a guide. Tests were conducted on dry, or near dry, product. Fastener tension is held at a factor somewhat less than yield point.Maximum Torque for Screws
ScrewSize
Torque Value In Lb
Torque Value Nm
2-56 2.2 .25
2-64 2.7 .31
3-48 3.5 .40
3-56 4.0 .45
4-40 4.7 .53
4-48 5.9 .67
5-40 6.9 .78
5-44 8.5 .96
6-32 8.7 .98
6-40 10.9 1.23
8-32 17.8 2.01
8-36 19.8 2.24
10-24 20.8 2.35
10-32 29.7 3.36
1/4 -20 65.0 7.35
1/4-28 90.0 10.20
15/16-18 129.0 14.60
15/16-24 139.0 15.70
• A twisting or wrenching effect, or moment, exerted by a force acting at adistance on a body, equal to the force multiplied by the perpendiculardistance between the line of action of the force, and the center ofrotation at which it is exerted.• A force, which tends to produce rotation. The measurement of torque isbased on the fundamental law of the lever.
What is torque?
Types of JointsFree Running-Slam (Hard Drive)-Resistance low at startand during rundown butpeaks suddenly as bolthead seats.
Compressing Gaskets (Soft Draw)-Turning resistancegradually increases assqueeze progresses tofinal turn.
Self-Tapping Screws-Initial resistance highthrough tapping travel,easing off until sudden(B) or gradual (A)
Sheet Metal Screws-Starting torque buildsuntil penetration made,then resistance slacksoff until head seats.
Wood Screws-Low resistance at startbuilds gradually throughentire rundown untilhead seats.
www.FlexibleAssembly.com (800) 696-7614 39
Contact InformationPhone Us Toll Free (800) 696-7614International (619) 287-7000Fax Us Toll Free (866) 587-9793Internet www.FlexibleAssembly.com
FAS-CAT08-1
FAS-CAT08-1