Leading From The Front

Factory Sites

Unit 1 : SokhadaNext to BSNL Telephone OfficeNr. Sokhada Temple, Sokhada, Vadodara -

Unit 2 : Nr. Lamdapura Bus Stop, At & Post : Lamdapura, Ta: Savli – 391 775 Dist: Vadodara

HEAD OFFICE4/B, Pancharatna BuildingJetalpur Road, Alkapuri RoadVadodara, Gujarat - 390 007

BRANCH OFFICE L-22,Silver Point, Bhatar Road, Surat.

Composite Fibreglass Gutter

Composite Fiberglass Gutters are

specifically designed for the

application in Industrial Shed-

Roofing in order to drain out the

rainwater in a systematic

manner, satisfying all the

queries to the Civil Engineering.

Frp Gutter – Drop End & Stop End

Rain Water Gutter

Application Of Gutter

IN INDUSTRIES AS, • EAVES GUTTER • VALLEY GUTTER

View Of Gutter

Showing the stiffeners & supports

Specifications Of Composite

Gutter We are providing 25.0 mm wide M.S. Flat stiffeners of 3.0 mm at every

interval of 1000.00 mm. Length impregnated on outer side of Gutter to get

an extra mechanical strength in total length.

Composite Fibreglass Gutter are available in 3.0 to 5.0 Meters of length.

Total thickness of the system will be 4.0mm and 5.0mm approximately.

Fixing arrangement remains similar to the conventional M.S. Gutter.

Weight of the Gutter is around 3.8 kg to 4.2 Kg. / Sq. Mtr. approximately

depending upon the thickness and length of the Gutter.

Main Advantages Of Composite Fibreglass Gutter

Composite Fibreglass Gutters are an excellent substitute for

conventional A.C. Gutters, M.S./ G.I. Gutters.

FRP Gutters are sturdy, durable, and gives long life hassle free

performance.

FRP Gutters are cent percent maintenance free, totally non-corrosive,

non-rusting, shatter free, leak proof, non-cracking material.

Other Advantages

FRP gutters are available in customized size, Shape, Thickness, Colour

Shade .

FRP Gutters are available in minimum thickness of 4.00mm & 5.0mm.

with Seven years Guarantee.

Fixing/Installation job of FRP Gutter is executed entirely on turnkey

basis.

FRP Gutters will be erected with necessary required slope to drain out

the rainwater easily.

FRP Gutter can bear the load of 2-3 persons per Rmt. having M.S.

Suspenders support at every 500mm. to 1000mm. which will give the life

long performance.

Why To Spend More For Industrial Rain Water Gutter

You have already spent 3 times by using either colour coated or

Galvalume sheet instead of asbestos or normal G.I. corrugated sheets

Total cost of Gutter system in Industrial roofing sheet cost is normally

15 to 25%, depends on size and quantity of Gutter.

Any metallic Gutter is corrosive which require regular maintenance

after one or two years.

Gutter corrosion spreading faster than roofing sheet due to collection of

wastage. Corrosion in Metallic Gutter is due to collection and settlement

of dust and leaving in wet condition specially in monsoon.

Due to non corrosive property of FRP and smooth finish, 90% of the dust

or other particles do not exist in Gutter but it drown with water.

Why To Spend More For Industrial Rain Water Gutter

Customer List

CUSTOMER NAME PLACE M/S. GENERAL MOTORS INDIA LTD. HALOL, GUJARAT

M/S. BRITCO FOODS LTD (COCA COLA) KHEDA, GUJARAT

O.N.G.C. LTD. VADODARA

M/S. SWIL INDIA LTD. JHAGADIA, BHARUCH

M/S. S. KUMARS LTD. MYSORE, KARNATAKA

M/S. ROYAL CUSHION VINYL PRODUCTS LTD. HALOL, GUJARAT

M/S. GE PLASTIC INDIA LTD. VADODARA

M/S. I.P.C.L. VADODARA

M/S. FAG BEARINGS INDIA LTD. VADODARA

M/S. RATMANI METALS & TUBES LTD AHMEDABAD

Customer List

NAME OF CUSTOMER PLACE

M/S. EUPEC – WELSPUN PIPECOATINGS INDIA LTD

DAHEJ, BHARUCH, ANJAR

INDIAN AIR FORCE TOWNSHIP BHUJ

M/S. ALEMBIC LIMITED PANELAV, HALOL

M/S. GLOFAME COTSPIN INDUSTRIES LIMITED

VAPI

M/S. WELSPUN TERRY TOWELS VAPI

M/S. RAJASHREE POLYFIL UMMALLA, BHARUCH

M/S. AJANTA MANUFACTURING LIMITED

SAMIKHIYARI, BHUJ

M/S. WELSPUN INDIA LIMITED ANAJAR, BHUJ

M/s. INDIAN STEEL CORPORATION LTD. KUTCH

NAME OF CUSTOMER PLACE

RELIANCE INFOCOM LTD CHENNAI, BANGLORE

RELIANCE PETROLEUM LTD JAMNAGAR

RELIANCE FILAMENT LTD SEL VASSA

FOOD CORPORATION OF INDIA GODHARA, GANDHIDHAM, VALSAD, VADODARA

Types Of Diff. Gutter

Industrial Fibreglass Reinforced Palstic (Frp) Roofing Sheet

First Time In IndiaFrp Panel Production Line With Automatic Gel Coating & Advance

Chopper System

Roofing Sheet

FRP side Cladding sheet

Technical Details Machine Make Frp Sheet

1. Fiber Intensity Non-alkali, non-twist, non-glue fiberglass.

02 Reinforced Line Tensile reinforced lines with longitudinal uniform distribution (It depends on consumers to choose voluntarily whether adding)

03 Fiberglass Adopting OCV high- quality fiberglass, the content no less than 30%.

04 Unit Weight 1800g/m² 2400g/m² 3050g/m²

05 Nominal Thickness 1.2mm 1.5mm 2.0mm

06 Heat Resistance Limit

-60°C to +130°C

07 Light Transmittance 53-65 %

08 Anti- ultraviolet Rate 99.9% (adding more than 0.35% UV absorbent)

09 Cracking Elongation Rate 1.9%

10 Thermal Expansion Coefficient 2.3×10cm/cm/°C

11 Thermal Conductivity 0.18w/m.k

12 Warranty 15 years

Physical property

01 Flexural Strength 449 N / mm2

02 Tensile Strength at break 1434 kg / cm2

03 Density 1.51 kg / cm3

04 Barcol Hardness

Technical Details Machine Make Frp Sheet

Frp Base Plate With Turbo Head

Turbo Ventilator

Why Ventilate ?

Due to faulty design, atmospheric & process generated heat , there is a crying need

for adequate ventilation in Industrial, Commercial & Community Application.

Wind Ventilator offers assured 24 x 7

ventilation at zero operating cost.

A slightest wind draft induces outward

airflow by centrifugal force. This results

in negative pressure inside the building.

Fresh Ambient Air from outside rushes

in to maintain equilibrium. This flow of

current creates a continuous cycle of

ventilation.

Air ventilator utilize wind

energy to induce air

flow by centrifugal action.

Centrifugal force created

by rotating vanes in turn

creates low pressure zone

Which draws fresh air from

outside.

Thus replacing polluted air/hot air continuously.

Minimum wind pressure will spin ventilator and even

after wind has stopped , the fly wheel effect of

ventilator will use its stored energy to rotate and to

maintain fresh air flow.

Principle :

Size : 24" Neck dia / 600 mm

Weight : 6.5 Kg approx

Speed : Depends on wind

Technology : Teflon Bushing ( noiseless)

Blades : 42 Nos. 0.5mm Aluminum Blades

Moc of bottom Ring : S. S 0.5mm thick

Top Cover : Stainless Steel

Centre Shaft: M.S. 19MM with powder coated

Note : Available in Aluminum, Stainless Steel, Powder Coating / Anodizing will be on request. Different speciation turbo ventilator are avaiable.

About Ventilator :

Thickness : 1.5 mm/as per requirements

Length : 1800 mm(6 feet)/as per requirements

Wide : Standard roof

Type : Single Piece

Available : All types of Profile base plates & in requested colour

About Frp Sheet :

No Electricity

No Operating Cost

No Maintenance

Runs On Wind Energy

Most Economical & Ecological

Weather & Storm Proof

Adaptable To any Roofing

Noise Less

Features :

Industrial Sheds

Factories

Hospitals

Restaurants

Hotels

Ware Houses

Paint Shops

Domestic Use

Ideally Suited For :

Type of Building

Air Changes Per Hour

Type of Building

Air Changes Per Hour

Assembly Hall 6-12 Chemical Plant 30-60Auditorium 4-12 Laundry 12-30

Bakeries 12-20 Paper Mill 08-30Boiler Room 15-60 Textile Mill 08-15

Brewery 8-30 Packing Room 08-30Class Room 10-15 Transformer

Room12-30

Engine Room 12-30 Paint Shop 20-30Factories (Light) 10-20 Ware House 05-08

Factories (Heavy) 20-40 Foundry 10-30

Recommended Air Changes :

• 100% Natural Result Oriented Air ventilation system

• Structure of systems have been designed to withstand up to 150 km/hour wind

velocity

• Systems weight is suitable to the normal purlin design

• Natural non mechanized Air Ventilation system for the Roofing (Ridge Level)

• System is protected by bird net

• Easy Fixing and installation

• Non corrosive covering, light weight, available in various sizes and maintenance

free

• No special Fabrication & addition is require for the errection or installation

• System is having self water draining facility

Advantage

Ridge ventilator

M.S. Structural supports legs.

[In interval of 1450mm appx.]

F.R.P. MOULDED WATER drain tray

Inbuilt Down take system.

Bird protection G.I. Net at topside.

Both side F.R.P. or PPGI Sheet covering

Corner piece (F.R.P. or PPGI) at roof Bottom.

Specifications

Available in 600mm, 900mm and 1000 mm throat opening.

Height of Ridge ventilator is 1000mm appx. fixed.

Weight will be around 32 kg per R.Mtr for SRV 600 and 38 Kg per R.Mtr.

for SRV 900

Size

•

Photo with application

F.R.P Ridge Ventilator

F.R.P Ridge Ventilator

Industrial Roofing Ridge Ventilator

Marketing Mix

Few Valuable Clients

I.S.O. F.G.I.

D & B

Federation of Gujarat Industries (F.G.I)

Dun & Bradstreet (D&B)

Builder association of India (B.A.I)

Indian Institute of Interior Designer (IIID).

Indian Green Building Council (IGBC)

Indian Polyurethane Association (IPUA)

Certificate

THANK YOU