Post on 18-Mar-2020
Endoscope reprocessingwithout compromisesOCS single time instrument connectionRFID hands-free process
The new standard for maximum safety in automated endoscope reprocessing
AER “S” rangeAutomatic endoscope reprocessor for low temperature washing, high level disinfection and liquid sterilization.
Suitable for all types of flexible endoscopes.
EPW 100 SManual cleaning phase assistance with OCS system. Fast, easy and traceable manual washing. Eliminates operator stress injury risks (syringe, flush, rinse). Automated leak test. Helps reduce human errors.
Automated device to support manual cleaning• Automatic leak testing • Traceability of the manual process • Suitable for organic residual sampling • Automatic management of sink workstation
AER range• ISO 15883 part 1 & 4 compliant• Simultaneous reprocessing of 1, 2 or 3 flexible endoscopes• Single or double door pass-through options• Short cycle times with maximum security
Drying cabinets range• EN 16442 compliant • Single or double door pass-through options• Horizontal storage• Capacity: 8 flexible endoscopes
Traceability system• From single device to full process• RFID or Barcode
OCS
Safe transport solutionTo improve and maximaze safety, thus reducing cross contamination risk while moving the endoscope across GI Labs dirty and clean paths.
Drying cabinets “S” rangeHorizontal storage, the drying cabinets are fitted of high level HEPA H14 air filtering and indirect UV air treatment.
One-time Connection Systemfor all processing and storageOne-time connection system shared between prewashing, washing/disinfection and drying/storage devices.
Thanks to the OCS philosophy, operators minimize endoscope manipulations in all the reprocessing steps. Connecting endoscopes channels adapters once dramatically decrease the risk of cross contamination as well as the overall working time. OCS: cleaver, ergonomic, fast solution straight to customers needs!
one-time channel connection
reduced contamination risk
three-times faster connection
unique identification ocs/instrument
one-time endoscope handling
easy and ergonomic
error proof connection
RFID
OPERATOR
EPW 100 Series
START
ENDOSCOPE
01
ENDOSCOPE
01
ENDOSCOPE
01
RFID hands-free processfor all Steelco machine
Steelco ARES platform RFID hands-free process starts from pre-washing units to AERs and Drying Storage Cabinets.
Operators and scopes RFID badges/bracelets identification makes traceability needless to even touch the devices panels to load/unload scopes and start a cycle, thus reducing potential cross contamination risks and enhancing nurses and patients safety.
EPW 100 Smanual washing phase
Endoscope identificationby RFID Card in the parental endoscope or in the endoscope loading cart
Operator identificationby FRID bracelet
Cycle startby RFID Card
Endoscope identificationby RFID card positioned in the endoscope loading cart
Automatic detection of the positioning level
Door opening/unlockingby operator RFID bracelet
Door openingby operator RFID bracelet
Endoscope identificationby RFID card positioned in the endoscope loading cart
Cycle startby RFID operator bracelet
EW 1 S and EW 2 Swashing process, high disinfection and liquid sterilization
ED 200 Sstorage and drying phase
DIRTYACCEPTANCE
ASSISTED PRE-CLEANING
DISINFECTION
DRYING and STORAGEUSAGE DELIVERY
Endoscopes are checked-in using barcode reader.
Endoscopes ad operators identifcation using RFID readers.
Operators identify the pre-washing units EPWs where the endoscopes pre-cleaned using RFID readers.
Delivery of adequately reprocessed endoscopes to the customers point of use.
Operators identify the AER where the endoscopes are loaded using RFID readers.
Check-in in endoscopy departments using barcode reader.
SteelcoData ARES is the dedicated software to allow complete endoscope cycle process monitoring and instrument traceability:
- Endoscope use- Manual cleaning- Endoscope automatic reprocessing- Endoscope drying/storage- Waiting time between the main phases of the process- Instruments at technical service or temporary off site
(allowing software adoption by external reprocessing services)
SteelcoData AREStraceability software
*
STEELCO ASIA Puchong, Malaysia info-asia@steelcogroup.com
STEELCO AUSTRIA Wals-Siezenheim, Austria info-at@steelcogroup.com
STEELCO BELGIUM Mollem, Belgium info-be@steelcogroup.com
STEELCO BENELUX Vianen, Netherlands info-benelux@steelcogroup.com
STEELCO FRANCE Paris, France info-fr@steelcogroup.com
STEELCO GERMANY (DACH Area) Gütersloh, Germany info-de@steelcogroup.com
STEELCO HUNGARY Budapest, Hungary info-hu@steelcogroup.com
STEELCO MEXICO CDMX, Mexico info-mx@steelcogroup.com
STEELCO NORDIC Kgs. Lyngby, Denmark info-nordic@steelcogroup.com
STEELCO NORGE Nesbru, Norway info-no@steelcogroup.com
STEELCO SPAIN Madrid, Spain info-es@steelcogroup.com
STEELCO SWITZERLAND Spreitenbach, Switzerland info-ch@steelcogroup.com
STEELCO USA West Palm Beach, USA info-usa@steelcogroup.com
Branches
STEELCO S.p.A.Via Balegante, 27 - 31039 Riese Pio X (TV) - ITALYPh. +39 0423 7561 - Fax +39 0423 755528info@steelcogroup.comwww.steelcogroup.com
HeadquartersP
rod
ucts
offe
red
for
sale
may
diff
er fr
om t
hose
des
crib
ed o
r ill
ustr
ated
in t
his
bro
chur
e d
ue t
o la
ter
pro
duc
tion
chan
ges
or/a
nd o
ptio
nal c
onfig
urat
ions
. Th
e p
rod
ucts
and
tec
hnic
al s
pec
ifica
tions
are
sub
ject
ed t
o ch
ange
with
out
prio
r no
tice.
Ple
ase
cons
ult
your
Ste
elco
dea
ler
for
the
late
st in
form
atio
n.
Flusher disinfectors
Dental washer disinfectors
ARES - flexible endoscopeautomated reprocessing system
Washing and sterilizing systems for lifescience and pharmaceutical applications
Laboratory glasswarewasher disinfectors
Washer disinfectors for central of sterilization departments
Steam sterilizing autoclaves
DC-P
D-02
-ARE
S OC
S EN
Rev
.04
*Only for products listed into the 909/MDD certificate