2011

Embedded Systems Software Training Center

BluRapport SDK

Agenda

lContinue learn how to work with BluRapport SDKl PIN codel OBEX APIl Implement FTP browser

Questions

lWhat is the Inquiry process?lWhat is the Service Discovery process?

Common API

Main Functions that are used to work with PIN code:int rx_set_fixed_pin(TCHAR* pin) – setup pin code, After that call the stack will reply this PIN immediately, without calling PIN callback.

void rx_register_pin_request_callback(rx_pin_code_request_callback_t func, void *user_ptr) - install PIN callback.- func - user-supplied function which should return PIN- user_ptr - pointer to user's private data to pass into callback as 1-st parameter

typedef rx_ret_t (*rx_pin_code_request_callback_t)(void * user_data, unsigned timeout_ms,

rx_remote_device_user_t *remote_device, TCHAR *out_pin_code) - callback to answer on PIN request- user_data - pointer passed to rx_register_pin_request_callback.- timeout_ms - time limit for PIN code request- remote_device - information about device which requested PIN.- out_pin_code PIN to pass to the stack

Your Task 1

1. Prepare application with support fixed pin code (use rx_set_fixed_pin())

2. Prepare application with support user defined pin code (use rx_register_pin_request_callback())

OBEX API

Main Functions that are used to work with OBEX profile:rx_ret_t rx_obex_initialize () - function initializes OBEX subsystem. This function must be called first, othewise OBEX APIs will not work. When you are done using OBEX call rx_obex_deinitialize

rx_ret_t rx_obex_deinitialize () – Frees the resources that are allocated by rx_obex_initialize. This function must be called if rx_obex_initialize return RET_OK. It also stops all services started by rx_obex_register_service without need of the handles.

Demo FTP browser

Main Functions that are used to work with OBEX profile:rx_ret_t rx_obex_connect(rx_obex_handle_t *connection_handle, rx_obex_connection_info_t *connection_info) - Establish OBEX connection.connection_info - structure containing connection parameters.rx_ret_t ret = RET_OK;rx_obex_handle_t handle = NULL;rx_obex_connection_info_t connection_info;rx_bd_addr_t bd_addr;unsigned channel;...memset(&connection_info, 0, sizeof(connection_info));memcpy(connection_info.uuid, RX_OBEX_FTP_UUID, RX_OBEX_FTP_UUID_LEN);connection_info.address.proto = RX_PF_RFCOMM;connection_info.address.protocol.rfcomm.channel = channel;(see Task 2 from Lab03)memcpy(&connection_info.address.protocol.rfcomm.bd_addr, &bd_addr, sizeof(rx_bd_addr_t));connection_info.uuid_len = RX_OBEX_FTP_UUID_LEN;ret = rx_obex_connect(TRS_CALL &handle, &connection_info);

Demo FTP browser

Main Functions that are used to work with OBEX profile:rx_ret_t rx_obex_ftp_put_file(rx_obex_handle_t connection_handle, TCHAR *file_name, TCHAR *src_dir, rx_obex_ftp_operation_progress_t *progress) - Copies a single file to the current directory for this connection on OBEX server- connection_handle - handle obtained by call to rx_obex_connect()- file_name - file name of the file to be pushed.- src_dir - the directory from where file will be taken. If this parameter is NULL, file is taken from the

current directory (specified in connection_info structure during connect).- progress - operation progress callback. Function will be called after sending every packet with file body.

This parameter could be null if information about progress is useless.

Demo FTP browser

Main Functions that are used to work with OBEX profile:typedef struct rx_obex_ftp_operation_progress_s{ rx_obex_ftp_operation_progress_callback_t callback; /* user callback function to be called * during file operation */ void *user_data; /* pointer to user data. This pointer will be returned in file operation callback */}rx_obex_ftp_operation_progress_t;

typedef rx_bool_t (* rx_obex_ftp_operation_progress_callback_t)(void* user_data, rx_uint32_t rest_bts, rx_uint32_t total_rest_bts, TCHAR *file_name) - OBEX file operation progress function.- user_data - pointer to user data. Filled by user in rx_obex_ftp_operation_progress_t structure

before call FTP operation that support progress callbacks.- rest_bts - bytes rest to transfer current file.- total_rest_bts - total bytes rest to transfer.- file_name - pointer to the file name which is now transferred.

Demo FTP browser

Main Functions that are used to work with OBEX profile:Example of using progress callback:

rx_bool_t operation_progress(void *d, rx_uint32_t rest_bts, rx_uint32_t total_rest_bts, TCHAR *name){ (void)d; xprintf(_T("file to transfer %s; %d bytes total; %d bytes left\n"), name, total_rest_bts, rest_bts); return RX_TRUE;}…prgs.callback = &operation_progress;prgs.user_data = NULL;ret = rx_obex_ftp_put_file(TRS_CALL gs_handle, gs_path, NULL, &prgs);

Demo FTP browser

Main Functions that are used to work with OBEX profile:rx_ret_t rx_obex_ftp_get_file(TRS_PROTO rx_obex_handle_t connection_handle, TCHAR* file_name, TCHAR* dest_dir, rx_obex_ftp_operation_progress_t *progress) - Gets a single file from the server- connection_handle - handle obtained by call to rx_obex_connect.- file_name - file name to get from the server.- dest_dir - the directory where the file should land (with the same name as the source).- progress - operation progress callback. Function will be called after sending every packet with file

body. This parameter could be null if information about operation progress is useless.

NOTE: if dest_dir is NULL, the received file will be placed in the default directory (specified in connection_info structure during connect).

Demo FTP browser

Main Functions that are used to work with OBEX profile:rx_ret_t rx_obex_ftp_chdir(rx_obex_handle_t connection_handle, TCHAR *dir) - Changes the current directory that the client sees on the server.- connection_handle - handle obtained by call to rx_obex_connect.- dir - path to the new directory.

rx_ret_t rx_obex_ftp_find_first(rx_obex_handle_t connection_handle, TCHAR *dir_name, rx_obex_ftp_find_data_t *data) - Gets remote directory information- connection_handle - handle obtained by call to rx_obex_connect.- dir_name - remote directory name.- data - data about the first file found.

rx_ret_t rx_obex_ftp_find_next(rx_obex_handle_t connection_handle, rx_obex_ftp_find_data_t *data) - Finds next remote file or folder.- connection_handle - handle obtained by call to rx_obex_connect.- data - data about the next file found.NOTE: return RET_OK on success, RET_END_OF_LIST on end of list file, or errorcode - otherwise.

rx_ret_t rx_obex_ftp_find_done(rx_obex_handle_t connection_handle) - Clear the informationallocated by rx_obex_ftp_find_first.- connection_handle - handle obtained by call to rx_obex_connect.

Demo FTP browser

Main Functions that are used to work with OBEX profile:Example of getting contents of folder:

rx_ret_t ret = RET_OK;rx_obex_handle_t handle = NULL;rx_obex_ftp_find_data_t data;...ret = rx_obex_ftp_find_first(TRS_CALL handle, &data);while(ret != RET_OK){ ret = rx_obex_ftp_find_next(TRS_CALL handle, &data);}ret = rx_obex_ftp_find_done(TRS_CALL handle);

Your Task 2

Prepare simple application for support FTP browsing on remote device. Use OBEX API:- rx_obex_ftp_find_xxx()- rx_obex_ftp_chdir()

Your Task 3

Prepare simple application for support file transporting feature. Use OBEX API:- rx_obex_ftp_get_file()- rx_obex_ftp_put_file()

Additional:- add support showing progress bar on

sending/receiving process- Add supporting for "the interruption of send/recv

data"

THANK YOU