Post on 06-Sep-2019
Windows and doors are manufactured in Włoszczowa and Pszczyna in factories equipped with the most modern production lines. Over 400 highly-qualified employees manufacture high-quality timber, PVC and aluminium windows, as well as high quality exterior and interior doors. With such an extensive range, we are able to satisfy the needs of various clients in both Poland and in other European countries. Investment in new technology is key to our success as is our close attention to detail and design... We believe our products set market trends.
www.stolbudkoronea.co.ukwww.koronea.co.uk
Further models and colours can be viewedwww.koronea.co.uk / www.stolbudkoronea.co.uk 5
Koronea Group in numbers
6
Solid timber combines exceptional durability, and stunning beauty. A timeless feature which can add significantly to the interior of many buildings of distinction both new and old. We utilise FSC Scotts Pine and Noble Oak in our designs and can provide other suitable timber species upon request. The wood is finished with transparent lacquers highlighting the growth structure of the timber or with covering paints in accordance with the RAL or NCS colour palettes. Alternative Artisan finishes where wax is skilfully hand applied are available and highly recommended.
Natural timber. Mahogony transparent lacquer. Natural Oak timber.
Natural timber
...helping you selectthe right material and finish 100% TIMBER
Further models and colours can be viewedwww.koronea.co.uk / www.stolbudkoronea.co.uk 7
Natural veneer
Natural veneer. Dark Oak.
Modified veneer. Palisander.
Natural Veneer is made of thin layers of natural wood which are combined in a bundle in the order they were originally sliced. Due to this technique, the wood ring pattern retains its continuity and even consistent shade. Veneer is a great alter-native to solid wood. Typically veneer is either Quarter-cut achieving a straight grain appearance or Crown-cut achieving more grain figure/feature. We utilise natural Oak and Walnut veneer. The veneer is then stained and clear lacquered in a wide range of colour options or in opaque paints in accordance with the RAL or NCS colour palettes.
Modified veneerModified veneer is an alternative to natural veneer. The wood is peeled into very thin sheets, dyed for consistent colour, locking in the pigment for ultimate UV protection and glued into blocks, from which thin veneer layers are then sliced with the desired feature. During this process a pattern resembling wood structure is created. Modified veneer guarantees even shade and perfect visibility of wood ring structure, elimi-nating the inconsistencies of nature. Due to technological modification, every sheet looks identical and is free of defects. The final effect is achieved by applying clear lacquer to the door face.
8
Laminate ECO laminates are a popular way of fi nishing doors. In our portfolio there are 5 types of laminates: CPL/HPL, PVC, Mikrofl ex, Lamisoft and Decor with different wear parameters and resistance. Therefore, we are able to produce doors for various building types and door locations. Thicker lami-nate, because of its resistance, is an excellent choice in locations with high traffi c, where door leaves are exposed to heavy use e.g. in public utility buildings, schools and hospitals. For the domestic / residential market it is possible to utilise a thinner laminate, which can also imitate natural timber veneer very well.
Laminates CPL / HPL – laminate of a layered structure ma-king it more durable and resistant to wear. Particularly recom-mended for use in public utility buildings. Plain solid colour or wood grain effect laminates can be selected.
PVC laminate in smooth or embossed version gives a noti-ceable texture to the fi nished product. The fi rst layer is PVC laminate, the outer layer is enriched with an overprinted sur-face creating a realistic textured appearance of the desired wood species.
A layer of hardened resin
An impregnateddecorative paper
A base paper
Protective lacquer
Transparent foil
Timber print
Middle layer
Base layer
Further models and colours can be viewedwww.koronea.co.uk / www.stolbudkoronea.co.uk 9
Lamisoft laminate – the fi rst layer is a synthetic base material, and the outer layer is enriched with an overprinted surface featuring optical and tangible properties close to natural wood. The laminate resembles a 3D laminate structure.
(S) – smooth surface of laminate with visible timber structure (red oak, noble oak, antique oak, chocolate oak)(T) – visible timber structure, with the timber grain structure evident to the touch (vanilla oak, whitewashed silver oak, whitewashed honey oak, whitewashed swamp oak
MIKROFLEX laminate – the base consists of paper with enhan-ced thickness and hardness. The outer layer of the laminate is enriched with an overprinted surface featuring a realistic texture of a given wood type. Also available in solid white colour.
DECOR laminate – the base consists of a thin paper, the outer layer of the laminate is enriched with overprinted surface fe-aturing a realistic texture of a given wood type. Also available in solid white colour.
A layer imitating timberSMOOTH WOOD (S)TOUCH WOOD (T)
A layer of hardened resin
Polymer
Decorative paper
Hardened top-coat lacquer
Japanese paperof high density
Base layer
Base paper with a print
10
Full paint
Lead time – 5 - 6 weeksCapacity – 1000 per monthConstruction - Light – Medium – Heavy / SevereColour/ Gloss level – Various gloss levels in all RAL coloursHeight – up to 2350 leafAccurate CNC recessing Door leaf & Doorset option Over rebated and square edge door option Ability to provide router patterns(feature grooves) in door facesFire ratings – NFR/ FD30/ FD60
Full paint - HDF board painted with water based paints or polyurethane paints RAL/NCS.
Further models and colours can be viewedwww.koronea.co.uk / www.stolbudkoronea.co.uk 11
Door core typesSolid core construction Semi-solid core construction „Honeycomb“ core construction
fi nish
TIMBERNATURAL VENEERMODIFIED VENEER
CPL LAMINATEHPL LAMINATEPVC LAMINATE
LAMISOFT LAMINATEMICROFLEX LAMINATE
DECOR LAMINATEFULL PAINT
price level
WHICH FINISH?resistance to abrasion humidity resistance
12
Door edge options
Over-rebated doorsOver-rebated doors, increasing the surface in contact with the door fra-me. This improves privacy and makes the task of installing a perfectly fitting door very easy due to the concealed gap and via the adjustable hinges. The characteristic protruding door leaf edge is visible when the door is closed.
Square edged doors have a smooth edge without the rebate. The door leaf creates a single solid surface; it is fully aligned with the door frame. In square edged door leaves, either traditional butt-hinges or concealed hinges are used.
Non-rebated doors
Further models and colours can be viewedwww.koronea.co.uk / www.stolbudkoronea.co.uk 13
OPE
NIN
G I
NW
ARDS
90o
Concelaed frame system The aluminium door frame and concealed hinges are designed to enable a timber door to become an invisible element of the wall.
Specified to open in or outConstructed of solid core, semi-solidcore to reduce weight, or even our lightweight honeycomb constructionDecoration can be full factory paint to any RAL reference, natural timber or modified veneers, PVC, HPL laminate, Mikroflex, Lamisoft, Décor, primed for painting by others or even wallpaper.
O90 OPE
NIN
G O
UTW
ARDS
180
o
O180
The door can be:
14
sergioDoor leaves from our SERGIO collection. Offering Modernsimplicity andelegance.
A wide range ofcolours designedto complementthesubtle interiordesign.
Sergio doors.Laminate: lamisoft, colour: Chocolate Oak
LAMINATE
15Further models and colours can be viewedwww.koronea.co.uk / www.stolbudkoronea.co.uk
PAN
EL
DO
OR
S
15
A.0 A.A A.B A.C
16
marcoThe MARCO collection has been designed to achieve harmony indesign.
A wide choice ofconfi gurations, colours and textures tocomplement yourinterior.
Marco doors.Laminate: lamisoft, colour: Whitewashed Swamp Oak.
VENEERLAMINATE
17Further models and colours can be viewedwww.koronea.co.uk / www.stolbudkoronea.co.uk
PAN
EL
DO
OR
S
17
A.6.0 A.6.2 A.6.6 D.1.1
18
fl avioTimeless design,with contemporarydetailing. The FLAVIO collection.
Simple lines fi t wellwith many modern home or offi ce designs.
Flavio doors.Laminate: lamisoft, colour: Whitewashed Silver Oak.
LAMINATE
19Further models and colours can be viewedwww.koronea.co.uk / www.stolbudkoronea.co.uk
PAN
EL
DO
OR
S
19
A.4.0 A.4.3 A.4.A A.4.C
20
vittorioVITTORIO, for those who appreciate the aesthetics of simplicity. An innovative method of incorporating light and vision within the design.
Vittorio doors.Fully factory painted, colour: RAL 9016
FULL PAINT
Further models and colours can be viewedwww.koronea.co.uk / www.stolbudkoronea.co.uk 21
GLA
SS
DO
OR
S
A.1.4 B.1.4 C.1.4
22
ivoIVO comes in a variety of models and a wide range of colour options.These doors add an elegant touch to many interior designs.
Ivo doors. Fully factory painted, colour: RAL 9016.
FULL PAINT
Further models and colours can be viewedwww.koronea.co.uk / www.stolbudkoronea.co.uk 23
FLU
SH
DO
OR
S
B.4.0 B.4.3 C.2.0 C.2.1
24
smart elitMake a statementwith - SMART ELITE. These doors arefi nished in richcolour and includedelicate aluminum features.
Smart Elit doors.Laminate: PVC, colour: Wenge
LAMINATE
Further models and colours can be viewedwww.koronea.co.uk / www.stolbudkoronea.co.uk 25
FLU
SH
DO
OR
S
A.2.B A.3.B A.4.B A.5.B
26
stylSTYLE collectioncomes in classicshades of timber.
Inspired by tradition with a modern twist.
Styldoors.Laminate: lamisoft, colour: Antique Oak
LAMINATE
Further models and colours can be viewedwww.koronea.co.uk / www.stolbudkoronea.co.uk 27
FLU
SH
DO
OR
S
A.3.0 A.3.3 D.1.A D.1.B
28
glamourGLAMOUR. For those who value bespokedesign. Subtle yetstriking. Available ina wide range of pastel paint shades.
This design incorporates precision cut featuregrooves in standard patterns or designedby our customers.
Glamour doors. Fully factory painted, colour: RAL 7035.
FULL PAINT
Further models and colours can be viewedwww.koronea.co.uk / www.stolbudkoronea.co.uk 29
FLU
SH
DO
OR
S
A.0 A.2 A.4 B.2
30
To compliment the internaldoor collection we haveselected a range of additional components.
Not only functional butadding substantially to the doors fi nal appearance.
We have included a smallselection of levers, roses,ancillary items and ventilation devices.
Door furniture
Further models and colours can be viewedwww.koronea.co.uk / www.stolbudkoronea.co.uk 31
DO
OR
FU
RN
ITU
RE
MARINAcolour: classic steel efect
TUCANAcolour: brass withpatina
SLICK colour: satin nickelantique brass
DALIAcolour: satin nickel,antique brass
CARINAcolour: classic steel efect
DOTTY Qcolour: satin nickel,antique brass
LARGOcolour: satin nickelchrome
TOM 2colour: matte chrome
32
WEN
TYLA
CJA
THE CONTINENTAL HINGE WHICH WORKS WITH OVER REBATED DOORS
THE FIXED-PIN BUTT HINGE THE CONCEALED HINGE
UNDERCUT
VENTILATION HOLES
Additional furniture
THE CONCEALED HINGE
VEN
TILAT
ION
HIN
GE
CO
VERS
COVERSwhite, brown, polished chrome, satin chrome, brushed nickel, gloss brass, satin brass, antique brass
Further models and colours can be viewedwww.koronea.co.uk / www.stolbudkoronea.co.uk 33
ADJU
STAB
LE O
R FIX
ED D
OO
R FR
AME
TYPE ATimber frame with extension lining
TYPE FSteel one piece
TYPE A PLUSTimber frame with extension lining
TYPE FSteel with extension lining
TYPE BMDF rebated frame
TYPE DTimber withextension lining
TYPE EMDF one piece lining with planted stop
DO
OR
FU
RN
ITU
RE
STANDARD ARCHITRAVE PROFILE AND JOINTING OPTIONS
45° Mitre jointarchitrave
90° Butt jointarchitrave
70 mm
Classic
34
Stolbud Koronea continuously strives to maintain and improve the quality of it’s products. Customer satisfaction is a priority in keeping with the Integrated Quality Management System PN - EN ISO 9001. Being environmentally conscious, we use FSC timber. Also, Stolbud Koronea has implemented the Environmental Protection System PN - EN ISO 14001. Appropriate implementation of the aforementioned systems has been confi rmed by the certifi ed body TÜV NORD. Sustaining and seeking improvements in our health and safety standards is another key area as we monitor and implement change under our management system in accordance with PN - EN 18001.
Certain Stolbud Koronea – products are CE marked.Stolbud Koronea have supplied a number of quality projects in the UK. We have an ongoing test programme. Stolbud Koronea are an authorised manufacturer of fi re doors to BS476: part 22 in accordance with Falcon Strebord global assessments for FD30 & FD60. (Also EI30 and EI60 to EN1634-1 available on request).
Premium quality and credibility
Further models and colours can be viewedwww.koronea.co.uk / www.stolbudkoronea.co.uk 35
Full Paint Facility