Post on 11-Sep-2021
Lyte Ladders and Towers have been manufacturing high quality access products in South Wales for over 70 years. Since its inception in 1947 Lyte has been recognised as one of the leading manufacturers in the trade and industrial sector with a reputation for innovative and quality products.
Our products are made in our brand new state of the art facility in Swansea and we are very proud to be One of the only British manufacturers of access equipment in the UK. All our products, where relevant, are kitemarked and certified by the British Standards Institute to ensure you are getting the best products possible.
We also offer a bespoke service to provide working at height solutions for a wide range of applications.
This catalogue has been designed to make it easy for you to pick the right product for the job and give you all the relevant information you need.
Company History
2 email: sales@lyteladders.co.uk
3www.lyteladders.co.uk Sales Tel: 01792 796666
Our training department is on hand to ensure that our products are used safely and correctly. As an accredited member of PASMA and The Ladder Association we offer a wide range of courses for the users of ladders, steps, towers and low level access as well as ladder inspections.
Lyte Industries (Wales) Ltd.Beaufort Reach, Siemens Close, Enterprise Park, Swansea, SA7 9BBTel: 01792 796666 Fax: Sales 01792 796678Email: sales@lyteladders.co.uk
Company History
LADDERS I TOWERS
4 email: sales@lyteladders.co.uk
ContentsProduct Selection Guide 6 - 9Lyte Tower Range 10 - 11Lyte Training Solutions 12
STEPLADDERS 13
Industrial Aluminium Stepladders (with tool tray) 14Industrial Aluminium Stepladders 15NEW Glassfi bre Trade Stepladders 16Made in Britain Glassfi bre Stepladders 18Made in Britain Stepladders with Handrails 19Heavy Duty Industrial Stepladders 20Heavy Duty Industrial Glassfi bre Stepladders 21Widesteps – Aluminium 22Widesteps – Glassfi bre 23Trade Platform Stepladder 24Light Weight Step Stools 25Double Sided Stepladder 26Handy Steps 26Steel Steps 26Safety Steps 27Fibreglass Pro Ladders 28
EXTENSION LADDERS 30
Domestic Extension Ladder 31Trade Extension Ladder 32Industrial Extension Ladder 33NEW Trade Glassfi bre Extension Ladder 34 - 35Heavy Duty Industrial Extension Ladder 36‘C’ Section Ladder 37Aluminium Telecommunications Ladder 38Glassfi bre Telecommunications 39
ROOF LADDERS 40
Trade Roof Ladders Single and Double Sections 41Industrial Roof Ladders 42
LADDER ACCESSORIES AND SPARES 43
Ladder Stopper 44Ladder Stay 44Multi Stopper 44Rubber Suction Feet 45Articulated Ladder Feet 45Universal Roof Hook 45Rack Clamps 45Ladder Footee 46Ladder Mat 46Ladder Pads 46Lyte Ladder Tags 46Roof Buddy System 47Step Ladder Feet 48Ladder Feet 48Wall Running Wheels 48Rope Kit 48Ridge Hook 48
MULTI PURPOSE LADDERS 49
NEW Lyte Combination Ladder 50Aluminium and Glassfi bre Combination Ladders 51NEW Lyte 3 Way Ladder 52Lyte Telescopic Ladder System 53Aluminium and Glassfi bre Multi Purpose Ladders 54Lyte 5 Way Platform Ladder 55
5www.lyteladders.co.uk Sales Tel: 01792 796666
ContentsWAREHOUSE & FACILITIES ACCESS 56
Fixed Industrial Steps 57Aluminium Warehouse Steps 58Steel Warehouse Steps 59Store Step 60
SPECIALIST LADDERS 61
Ladda-Steps 62Fruit Picking Tripod 63Shelf Ladder 64Surveyors Ladder 64Loft Ladders 65 - 67
LOW LEVEL ACCESS 68
Work Platforms 69Glassfi bre Work Platform 69Hop Up Aluminium Platform 69HIPOD Podium Steps 70 - 71PAS 250 72Lyte Podium Steps 73 - 74Mobile Working Platforms 75Telescopic Working Platforms 76
STAGING AND TRESTLES 77
Staging Boards 78Trestles 79
TOWERS 80
NEW GRP Lift System 81 - 82Lift System/SKUFFS 83 - 84NEW Hilyte Leader GRP 500 85 - 88Improved Hilyte 500 89 - 91Improved Hilyte 250 92 - 94Stairlyte Tower 95Bespoke Access Products 96
SACK TRUCKS 97
Heavy Duty Sack Truck 98Standard Sack Truck 98Heavy Duty Sack Truck 99P Handle Sack Truck 99Aluminium Folding Sack Truck 100Double Handle Sack Truck 100Warehouse Platform Trolley 101Heavy Duty Garden Truck 101Folding Toe Sack Truck 102Multi Sack Truck (Alu) 102Multi Sack Truck (Steel) 103Heavy Duty Multi Sack Truck (Alu) 103Heavy Duty Stair Climber 104Heavy Duty Folding Toe Sack Truck 105
Pasma Training 106Ladder Association Training 107Conditions of Sale 108 - 109Ladder and Stepladder DO’S and DON’TS 110STEP Methodology 111Safe Use of a Scaffold Tower or Mobile Tower 112Don’t Risk Your Own Life or the Lives of Others 113
6 email: sales@lyteladders.co.uk
British and European standards apply to most ladders and step ladders, so make sure you choose the right kind of access equipment for the job.
Class 3 (Domestic) BS2037This Standard applies to products being used in and around the home; these products are designed for infrequent use.Duty Rating 95Kg Max permissible load 125Kg
Previous Class 2 (Trade) BSEN131This is the European Standard, which covers the products being used in a trade environment; these products are designed for regular light trade work.Max permissible load 150Kg
Class 1 (Industrial) BS2037This Standard applies to products being used in an industrial environment; these are high quality products, designed for heavy and regular loading.Duty Rating 130KgMax permissible load 175Kg
EN14183:2003This European Standard applies to step stools. The standard excludes ladders and stepladders as defined by EN 131-1:1993. Maximum permissible load 150Kg
Loft Ladders - BSEN14975:2006This is the latest standard for loft ladders.150kg Max permissible load
Towers - BSEN1004:2004Mobile access and working towers made of prefabricated materials.
Product Selection Guide
•
•
•
•
•
•
7www.lyteladders.co.uk Sales Tel: 01792 796666
The work at height regulations state that duty holders must ensure:
• all work at height is properly planned and organised; • those involved in work at height are competent; • the risks from work at height are assessed and
appropriate work equipment is selected and used; • the risks from fragile surfaces are properly controlled;
and equipment for work at height is properly inspectedand maintained.
There are many things the Work at Height Regulations state for working at height safely, some key points are:
• Always complete a risk assessment• Follow the simple hierarchy for managing and selecting
equipment for work at height• Always take steps to eliminate any risk to the user and
any other parties working close by• Ensure those using the equipment are trained and
competent to carry out work at height
Product Selection Guide
9m(30’)6m
(20’)3m
(10’)
For further information, instruction manuals or user guides to help you select and use any of
our equipment please call us on: 01792 796666 or go to our website: www.lyteladders.co.uk
Safe Use Height Guide
This is a guide only
8 email: sales@lyteladders.co.uk
Product Selection Guide
Products for infrequent, short duration use in the home. Not for use in a trade environment.
These products are for trade use and are manufactured to take more wear and tear. They are designed for frequent use.
Products designed to be used under extreme conditions. Made for the trade professional.
Products designed to be used in a more demanding and extreme environment. These are made for frequent use.
To help you make the right selection we have devised a classifi cation system to guide you through the products.
9www.lyteladders.co.uk Sales Tel: 01792 796666
Product Selection Guide
Suitable Environments.
Home
Building Site
Warehouse
ElectricalHazards
Offi ce
Factory
Shops
Zone 1Environment
10 email: sales@lyteladders.co.uk
Lyte Tower Range
A MOBILE SCAFFOLD TOWER FOR EVERY ACCESS REQUIREMENT...
HilyteHilyte250
10 email: sales@lyteladders.co.uk
11www.lyteladders.co.uk Sales Tel: 01792 796666
Lyte Tower Range
HILYTE250 & HILYTE500, HILYTE LEADER GRP 500 & LIFT
SEE PAGES 80 - 96
GRP
11www.lyteladders.co.uk Sales Tel: 01792 796666
12 email: sales@lyteladders.co.uk
The Lyte training department was developed in 2005 as a result of the introduction of the Work at Height Act and the courses created by The Ladder Association and PASMA.
As members of PASMA and The Ladder Association, Lyte carry an accreditation from each association as an official training centre. With a fully approved and equipped training centre, courses can be carried out on site or at a customer’s facility by any one of our highly trained instructors based all around the UK.
Under the Working At Height regulations every person in the chain leading up to, and including, the final user has a duty of care to both themselves and others to know and understand the practical implications of working safely at height.
PASMA training is the most widely recognised form of prefabricated mobile access tower training in the UK and provides successful delegates with a competency certificate and an encapsulated photo ID card verifying that they have passed the written and practical tests to PASMA’s strictly enforced standards.
The Ladder Association courses require a demonstration of competence as a key requirement of the new regulations and successful completion of The Ladder Association training courses, delivered only by Ladder Association approved training centres, provides proof of such competence. After the successful completion of a practical and written test the candidate will receive a certificate and photo ID card.
Lyte Training Solutions
Lyte TrainingSolutions
LTS
12 email: sales@lyteladders.co.uk
Industrial Aluminium Stepladders (with tool tray) 14
Industrial Aluminium Stepladders 15
NEW Glassfi bre Stepladders 16
Made in Britain Glassfi bre Stepladders 18
Made in Britain Stepladders with Handrails 19
Heavy Duty Industrial Stepladders 20
Heavy Duty Industrial Glassfi bre Stepladders 21
Widesteps – Aluminium 22
Widesteps – Glassfi bre 23
Trade Platform Stepladder 24
Light Weight Step Stools 25
Double Sided Stepladder 26
Handy Steps 26
Steel Steps 26
Safety Steps 27
Fibreglass Pro Ladders 28
Stepladders
14 email: sales@lyteladders.co.uk
Industrial Aluminium Stepladders (with tool tray)
• Certified to BS2037 Class 1• Unique strengthening beam incorporated into
non-slip treads, rubber feet and aluminium side arms prevents slips and twists as there are no tapes to snap, or flimsy arms to break
• Rigid box section back legs with additional cross braces and ‘k’ straps for increased strength and stability
• Lightweight and easy to carry• Plastic tool tray to hold tools
and equipment while working
Industrial Stepladders
Available with handrails if required, please call us or see page 17 for more details.
The Lyte range of industrial stepladders is one of the most popular in the UK and is used frequently across many sectors.
Swing Back Stepladders
Code Open Height (m)
Closed Height
(m)
Treads Weight (kg)
BSBB3 0.58 0.66 3 2.35
BSBB4 0.81 0.89 4 3.20
BSBB5 1.03 1.14 5 4.30
BSBB6 1.26 1.38 6 5.10
BSBB7 1.48 1.62 7 5.80
BSBB8 1.70 1.86 8 6.70
BSBB10 2.17 2.34 10 8.70
BSBB12 2.57 2.82 12 10.60
Platform Stepladders
Code Overall Open
Height (m)
Platform Height
(m)
Closed Height (m)
Treads inc Platform
Weight (kg)
BSBP3 1.24 0.59 1.35 3 4.50
BSBP4 1.46 0.81 1.59 4 5.20
BSBP5 1.68 1.03 1.83 5 6.10
BSBP6 1.91 1.26 2.07 6 7
BSBP7 2.13 1.48 2.31 7 7.80
BSBP8 2.31 1.68 2.55 8 8.80
BSBP10 2.74 2.12 3.01 10 11
BSBP12 3.20 2.60 3.52 12 13
BSBB6
BSBP6
MADE IN BRITAIN
15www.lyteladders.co.uk Sales Tel: 01792 796666
IndustrialAluminium Stepladders
• Certified to BS2037 Class 1• Unique strengthening beam
incorporated into non-slip treads• Rubber feet and aluminium side arms
prevents slips and twists as there are no tapes or flimsy arms to break
• Lightweight and easy to carry• Ideal for light trade use• This range of ladders has an aluminium
top instead of a tool tray
Platform Stepladders
Swing Back Stepladders
Code OpenHeight (m)
Closed Height
(m)
Treads Weight(kg)
ESS3 0.58 0.66 3 2.35
ESS4 0.79 0.90 4 3.20
ESS5 1.01 1.14 5 4.30
ESS6 1.24 1.38 6 5.10
ESS7 1.45 1.61 7 5.80
ESS8 1.67 1.86 8 6.70
ESS10 2.12 2.34 10 8.70
ESS12 2.55 2.82 12 10.60
Code Overall Open
Height (m)
Platform Height
(m)
Closed Height (m)
Treads inc Platform
Weight (kg)
ESP3 1.22 0.58 1.35 3 4.50
ESP4 1.43 0.79 1.60 4 5.20
ESP5 1.66 1.02 1.84 5 6.10
ESP6 1.87 1.23 2.08 6 7
ESP7 2.09 1.45 2.32 7 7.80
ESP8 2.32 1.67 2.56 8 8.80
ESP10 2.73 2.12 3.01 10 11
ESP12 3.19 2.58 3.51 12 13
* All stepladders are available with hand rails, please call for more details
High quality aluminium industrial stepladder manufactured in the UK.
Industrial Stepladders
ESS4
ESP6
16 email: sales@lyteladders.co.uk
NEW Glassfi bre Trade Stepladders
NEW Trade Glassfi bre Swingback Stepladder
• GFHS Range• Fibreglass Heavy duty swingback stepladder• Certified to EN131• Non-Conductive to 30,000 Volts• Slip resistant treads & feet• Integral tool tray• Outside side locks prevent pinching • Treads are double riveted for extra strength• Braces for extra rigidity
Code Open Height (m)
Closed Height (m)
Treads Weight (kg)
GFHS4 1.08 1.17 4 5.41
GFHS5 1.37 1.47 5 6.73
GFHS6 1.65 1.78 6 7.77
GFHS8 2.21 2.39 8 10.45
GFHS10 2.78 3.00 10 13.00
17www.lyteladders.co.uk Sales Tel: 01792 796666
NEW Glassfi bre Trade Stepladders
NEW Trade Glassfi bre Platform Stepladder
• GFHP Range• Fibreglass heavy duty platform stepladder• Certified to EN131• Non-Conductive to 30,000 Volts• Slip resistant treads & feet• Integral tool tray• Outside side locks prevent pinching • Treads are double riveted for extra strength• Braces for extra rigidity
Code Open Height (m)
Platform Height
(m)
Closed Height (m)
Treads Weight (kg)
GFHP3 1.29 0.70 1.39 3 6.66
GFHP4 1.52 0.94 1.64 4 7.36
GFHP5 1.73 1.18 1.89 5 8.65
GFHP6 1.98 1.41 2.14 6 9.33
GFHP7 2.24 1.64 2.41 7 10.43
GFHP8 2.47 1.87 2.66 8 12.16
GFHP10 2.93 2.33 3.16 10 15.66
18 email: sales@lyteladders.co.uk
Heavy Duty Glassfi bre Stepladders
• Certified to BSEN131• Non-conductive so is ideal to use
where electrical hazards exist• Unique strengthening beam
incorporated into non-slip treads, rubber feet and aluminium side arms prevents slips and twists as there are no tapes to snap, or flimsy arms to break
• Rigid box section back legs with additional cross braces and ‘k’ straps for increased strength and stability. Back legs of 10 and 12 tread are reinforced.
• Lightweight and easy to carry• Plastic tool tray to hold tools
and equipment while working
Available with handrails if required, please call for details
Heavy Duty Glassfi bre Platform Stepladders
Heavy Duty Glassfi bre Swingback Stepladders
Glassfi bre Stepladders
Code Overall Open
Height (m)
Platform Height
(m)
Closed Height (m)
Treads inc Platform
Weight (kg)
GFBP3 1.23 0.59 1.33 3 5.80
GFBP4 1.44 0.82 1.56 4 6.70
GFBP5 1.67 1.04 1.8 5 7.80
GFBP6 1.89 1.26 2.04 6 8.80
GFBP7 2.1 1.48 2.27 7 9.60
GFBP8 2.31 1.69 2.51 8 10.70
GFBP10 2.73 2.11 3 10 13.60
GFBP12 3.17 2.56 3.47 12 15.50
Code Open Height (m)
Closed Height
(m)
Treads Weight (kg)
GFBB3 0.55 0.59 3 2.70
GFBB4 0.77 0.85 4 3.80
GFBB5 0.99 1.1 5 4.90
GFBB6 1.22 1.34 6 5.80
GFBB7 1.44 1.58 7 6.70
GFBB8 1.7 1.81 8 7.60
GFBB10 2.11 2.29 10 11.50
GFBB12 2.54 2.77 12 12.50
One of the only British made glassfi bre stepladders on the market.
GFBB5
GFBP6
MADE IN BRITAIN
19www.lyteladders.co.uk Sales Tel: 01792 796666
Aluminium Stepladder with Handrails
Code Overall Open
Height (m)
Platform Height
(m)
Closed Height (m)
Treads inc Platform
Weight (kg)
ESP3HR 1.22 0.58 1.35 3 4.90
ESP4HR 1.43 0.79 1.59 4 5.60
ESP5HR 1.66 1.02 1.83 5 6.50
ESP6HR 1.87 1.23 2.07 6 7.40
ESP7HR 2.09 1.45 2.31 7 8.20
ESP8HR 2.3 1.67 2.55 8 9.20
ESP10HR 2.73 2.12 3.01 10 11.40
ESP12HR 3.19 2.58 3.52 12 13.40
Heavy Duty Glassfi bre Stepladder with Handrails
Code Overall Open
Height (m)
Platform Height
(m)
Closed Height (m)
Treads inc Platform
Weight (kg)
GFBP3HR 1.23 0.59 1.33 3 6.20
GFBP4HR 1.44 0.82 1.56 4 7.10
GFBP5HR 1.67 1.04 1.8 5 8.20
GFBP6HR 1.89 1.26 2.04 6 9.20
GFBP7HR 2.1 1.48 2.27 7 10
GFBP8HR 2.31 1.69 2.51 8 11.10
GFBP10HR 2.73 2.11 3 10 14
GFBP12HR 3.17 2.56 3.47 12 15.90
With Handrails
• Our quality range of aluminium and glassfibre platform step ladders with handrails added
• Due to popular demand we have now made our ESP and GFBP range with handrails a standard product in our product portfolio all of which are manufactured in our factory in the UK
ESP8
GFBP4
20 email: sales@lyteladders.co.uk
Extra Industrial Platform Stepladders
• Certified to BS2037 Class 1• Designed as a heavy duty version of the
industrial platform step, available in a larger range• Box section back legs, heavy duty side arms
and heavy bracing ‘K’ straps provides excellent strength and stability
Available with handrails if required, please call for details
Heavy Duty Industrial Stepladders
Code Platform Height
Actual Open Height
Closed Height
Width Treads Weight (KG)
SP4 970 1475 1625 435 4 8.5
SP5 1210 1710 1910 465 5 10
SP6 1455 1960 2170 490 6 11
SP7 1695 2195 2435 515 7 12
SP8 1935 2435 2700 545 8 13
SP9 2180 2680 2965 565 9 14.5
SP10 2420 2910 3230 595 10 15.8
SP12 2900 3400 3755 645 12 18.2
SP14 3390 3880 4290 695 14 21.2
SP16 3870 4370 4800 750 16 24.5
Code ActualOpen
Height (m)
Closed Height (m)
Treads Weight (kg)
SL3 0.71 0.90 3 3.20
SL4 1.00 1.20 4 4.10
SL5 1.22 1.40 5 5.00
SL6 1.46 1.70 6 5.90
SL7 1.71 2.00 7 6.80
SL8 1.95 2.20 8 8.20
SL9 2.19 2.50 9 9.10
SL10 2.44 2.70 10 10.00
SL11 2.68 3.00 11 10.90
SL12 2.93 3.30 12 11.80
SL13 3.17 3.60 13 13.20
British made aluminium industrial stepladder, manufactured to withstand all that the user can throw at it.
IndustrialSwingback Stepladders
• Certified to BS2037 Class 1• A wide range of stepladders designed
for general trade or industrial use• Double riveted with ‘K’ straps for
additional strength and stability• Non-slip treads and rubber feet
also keep steps stable• Now manufactured with box section
back legs for extra strength and stability
SL5
SP10
21www.lyteladders.co.uk Sales Tel: 01792 796666
Industrial Glassfi bre Stepladders
Industrial Glassfi bre Platform Stepladders
• Certified to BSEN131• Industrial glassfibre stiles• Non-conductive, so is ideal to use where
electrical hazards exist• Designed for general trade or industrial use• Non-slip treads and feet keep steps stable• Robust working platform
Code Open Height
(m)
Closed Height
(m)
Base Width (m)
Base Span (m)
Treads Weight (kg)
GSL4 0.99 1.14 0.41 0.76 4 8
GSL6 1.47 1.64 0.46 1.07 6 10
GSL8 1.93 2.16 0.51 1.50 8 12
GSL10 2.44 2.69 0.56 1.78 10 15
GSL12 2.91 3.23 0.61 2.13 12 19
GSL14* 3.42 3.75 0.66 2.54 14 23
Code Open Height (m)
Closed Height
(m)
Platform Height (m)
Treads Weight (kg)
GSP4 1.47 1.64 0.98 4 11
GSP6 1.93 2.16 1.45 6 14
GSP8 2.44 2.69 1.94 8 17
GSP10 2.91 3.23 2.41 10 20
GSP12 3.38 3.76 2.90 12 23
GSP14* 3.89 4.29 3.40 14 26
* Not Kitemarked
* Not Kitemarked
British made industrial stepladder, manufactured to withstand all that the user can throw at it.
Industrial Glassfi breSwingback Stepladders
• Certified to BSEN131• Industrial glassfibre stiles• Non-conductive, so is ideal to use
where electrical hazards exist• Designed for general trade or industrial use• Non-slip treads and feet keep steps stable
22 email: sales@lyteladders.co.uk
Aluminium Widestep
• Certified to BS2037 Class 1• Wide working platform of
400mm x 600mm• All aluminium frames and treads• Suitable for industrial work as well as trade use• Wheels at rear to make transportation easier• Safety chain for added security giving
the user 360 degree safety• Handrails included for added safety
Aluminium Widestep
Code Open Height (m)
Platform Height
(m)
Closed Height (m)
Tread Weight (kg)
BSWP2 1.41 0.38 1.57 2 6
BSWP3 1.62 0.61 1.78 3 8
BSWP4 1.84 0.83 1.98 4 9
BSWP5 2.05 1.05 2.22 5 10
BSWP6 2.26 1.26 2.49 6 11
BSWP7 2.47 1.48 2.73 7 12
BSWP8 2.7 1.71 2.96 8 13
In response to popular demand and changes in Health and safety regulations Lyte introduced the widestep range. This range has gone from strength to strength and manufactured in both aluminium and glassfi bre it has been a success across many industry sectors.
Optional FeatureLadder tag for inspection and maintenance
23www.lyteladders.co.uk Sales Tel: 01792 796666
Glassfi bre Widestep
• Certified to BSEN131• Wide working platform of 400mm x 600mm• Glass fibre frame with aluminium treads• Suitable for industrial work as well as trade use• Wheels at rear to make transportation easier• Safety chain for added security giving
the user 360 degree safety• Handrails included for added safety
Glassfi bre Widestep
Code Open Height (m)
Platform Height
(m)
Closed Height (m)
Tread Weight (kg)
GFWP2 1.41 0.38 1.57 2 8
GFWP3 1.62 0.61 1.78 3 9
GFWP4 1.84 0.83 1.98 4 11
GFWP5 2.05 1.05 2.22 5 14
GFWP6 2.26 1.26 2.49 6 16
GFWP7 2.47 1.48 2.73 7 18
GFWP8 2.7 1.71 2.96 8 20
Optional FeatureLadder tag for inspection and maintenance
24 email: sales@lyteladders.co.uk
Trade Stepladders
EN131 Trade Platform Step Ladder Range
• Suitable for light trade and domestic use
• Certified to EN131 • Static load 150kg• Duty Rating 115kg • Lightweight & robust • Slim design – ideal for storage and transport
British made, strong, lightweight aluminium platform ladder range.
Code Step ClosedHeight (mm)
Opening Height (mm)
Platform Height (mm)
Depth (mm)
Width (mm)
Approx. Weight
(kg)
ENPL3 3 1250 1220 610 657 427 3.20
ENPL4 4 1490 1440 830 811 452 3.85
ENPL5 5 1730 1660 1050 967 476 4.55
ENPL6 6 1970 1880 1270 1127 500 5.90
ENPL7 7 2210 2095 1485 1279 530 7.10
ENPL8 8 2450 2315 1705 1437 555 8.15
25www.lyteladders.co.uk Sales Tel: 01792 796666
2 Tread Step Stool With Comfortable Foam Handle
• 2 treads• EN14183• Foam covered handrail• Large high grip treads• Smooth painted finish
3 Tread Step Stool with Extended Handrail
• 3 treads• EN14183• Large high grip treads• Smooth painted finish• High handrail for extra support
and stability
2 Tread Step Stool with Extended Handrail
• 2 treads• EN14183• Large high grip treads• Smooth painted finish• High handrail for extra support
and stability
LYT2061
Height to top tread 48cm
Spacing between treads 21cm
Height to handrail (from fl oor) 83cm
Height to handrail (from top tread) 36cm
Depth when open 52cm
Weight 4.80kg
LYT2072
Height to top tread 48cm
Spacing between treads 21cm
Height to handrail (from fl oor) 108cm
Height to handrail (from top tread) 59cm
Depth when open 50cm
Weight 4.80kg
LYT2047
Height to top tread 72cm
Spacing between treads 21cm
Height to handrail (from fl oor) 125cm
Height to handrail (from top tread) 52cm
Depth when open 65cm
Weight 7kg
Light Weight Step Stools
26 email: sales@lyteladders.co.uk
• Lyte double sided steps• Practical double sided,
folding stepladder• Wide comfortable treads• Easy to transport and store• Non slip feet
Lyte 2 Tread Double Sided Step
Double Sided Steps
LYT2x2
Platform height from fl oor 43cm
Top tread 33cm x 18cm
Closed width 17.5cm
Closed height 48.5cm
Handy Step
• Strong steel frame• Nestable, lightweight static steps• All weather non-slip injection moulded treads
Steel Steps
• Comply to EN14183 Standard• These nestable steps are constructed from tubular steel &
come complete with non-slip rubber feet• The one step has a ribbed rubber mat platform & the the two
step has a diamond rubber mat platform
Code No of Steps
Overall H x W x D mm Weight (kg)
HAND1 1 285 x 400 x 400 3
HAND2 2 405 x 415 x 730 5
HAND2POST 2 with post 1400 x 415 x 730 5.5
Code Product Platform Height (mm)
Overall Size (mm)
No of Steps Load Capacity (kg)
Weight (kg)
SUS1 Steel Step-Ups 255 440 x 385 1 150 2.2
SUS2 Steel Step-Ups 375 555 x 445 2 150 3.5
27www.lyteladders.co.uk Sales Tel: 01792 796666
Safety Steps
Folding Safety Steps
• This range of aluminium folding steps are ideal for use in offices, storerooms, warehouses etc
• GS approved*• Large serrated aluminium treads (360w x 205Dmm)
& high handrail offer increased safety during use• Tilt & pull wheels for easy movement without lifting• Easy slope incline• Folded size: only 120mm deep
* For more details on GS approved products call us on 01792 796666.
Code No of Steps
Overall dimensions when erected
Dimensions when folded
Height of top platform (mm)
Weight (kg)
2AFS 2 850 x 520 x 545mm
790mm 440 6.5
3AFS 3 1240 x 550 x 830mm
1060mm 660 9
4AFS 4 1440 x 580 x 1110mm
1360mm 880 11
Tool Tray
28 email: sales@lyteladders.co.uk
Fibreglass Pro
FibreglassPro Shelf Ladder
• PROTOPTM with Magnet & ‘V’ shape design provides greater stability on corners and non-marring rubber tread protects the work surface
• The bottom of the ladder is flared for stability
• Double Rivet Step Construction• SHOXTM and DaBoot® for
superior impact absorption
Code Treads Height (m) Width (m) Weight (kg)
FH1504 4 1.28 0.49 4
FH1506 6 1.88 0.56 6
FH1508 8 2.49 0.64 10
29www.lyteladders.co.uk Sales Tel: 01792 796666
Fibreglass Pro
FibreglassPro Platform Ladder
• 170kg load capacity• Includes weight of user
plus materials• PROTOPTM –
Versatile and Durable• Double-Rivet Step Construction• Wide Back Braces• SHOXTM – Superior
Impact Absorption• DA Boot®
Code Platform Height (m) Step Depth (m) Ladder width (m) Weight (kg)
FXP1802HD 0.05 0.91 0.53 9.52
FXP1803HD 0.07 0.91 0.60 11.33
FXP1804HD 0.10 0.91 1.20 12.24
FXP1805HD 0.12 0.91 1.35 13.15
FXP1806HD 0.15 0.91 1.51 16.32
FXP1808HD 0.20 0.91 1.81 21.31
FXP1810HD 0.25 0.91 2.10 29.48
FXP1812HD 0.30 0.91 2.41 34.47
Extension Ladders
Domestic Extension Ladder 31
Trade Extension Ladder 32
Industrial Extension Ladder 33
NEW Trade Glassfi bre Extension Ladder 34
Heavy Duty Industrial Extension Ladder 36
‘C’ Section Ladder 37
Aluminium Telecommunications Ladder 38
Glassfi bre Telecommunications Ladder 39
31www.lyteladders.co.uk Sales Tel: 01792 796666
Domestic Extension Ladders
TriplesCode
Closed Height
(m)
Open Height (m)
Rungs Weight (kg)
BD325 2.2 5.2 7 8.50
BD330 2.7 6.7 9 14.50
BD335 3.3 8.5 11 19.00
DoublesCode
Closed Height
(m)
Open Height (m)
Rungs Weight (kg)
BD225 2.2 3.7 7 6.50
BD230 2.7 4.7 9 8.00
BD235 3.3 5.9 11 11.00
BD240 3.8 6.9 13 14.50
BD245 4.4 8.1 15 16.00
DIY Extension Ladder 2 & 3 section
• Superior domestic extension ladder• Manufactured with comfortable large “D” shaped rung• Strong yet lightweight box section stiles for greater rigidity• Non-slip feet riveted in place• Certified to BS2037 Class 3• Comprehensive range of sizes extruded hooks and guides
provide extra safety• Available in 2 & 3 sections
Two Section Push Up
Three Section Push Up
32 email: sales@lyteladders.co.uk
Trade Extension Ladders
Professional Trade Extension Ladder 2 & 3 section
• Superior trade extension ladder manufactured with the highest grade & quality aluminium
• Manufactured with comfortable large “D” shaped rung
• Ideal for all types of trade work• Secure non slip grip with all round
PVC moulded feet• Certified to EN131• Available in 2 & 3 sections
Three Section Push-upCode Closed
Height (m)Ext.
Height (m)
Rungs Weight (kg)
ELT325 2.42 5.22 8 16.50
ELT330 2.92 6.85 10 18.50
ELT335 3.42 8.46 12 25.50
ELT340 4.04 10.22 14 28.50
Two Section Push-upCode Closed
Height (m)Ext.
Height (m)
Rungs Weight (kg)
ELT225 2.42 3.82 8 9.00
ELT230 2.92 4.88 10 10.50
ELT235 3.42 5.94 12 14.00
ELT240 4.04 7.03 14 16.00
ELT245 4.42 7.81 15 20.50
ELT250 4.92 8.83 17 23.50
ELT255 5.42 9.90 19 29.00
The Lyte ELT range is a brand in its own right. This product has been around for many years and lives up to is reputation of being the most popular trade extension ladder on the market.
33www.lyteladders.co.uk Sales Tel: 01792 796666
Industrial Extension Ladders
Professional Industrial Extension ladder – 1,2 & 3 section
• All three types are certified to BS2037 Class 1
• Available in single section or double and triple push-ups
• Now fitted with the new comfortable D-shaped rung and solid moulded rubber feet at both ends
• A cost effective alternative to the heavy duty range, these ladders are easy to handle yet incredibly rigid in relation to weight
Single SectionGeneral Duty Ladders
Two Section Push-upGeneral Duty Extension Ladders
Three Section Push-upGeneral Duty Extension Ladders
Code Closed Height
(m)
Ext. Height (m)
Rungs Weight (kg)
GS120 1.93 - 7 4.10
GS125 2.43 - 9 5.00
GS130 2.93 - 11 6.40
GS135 3.43 - 13 7.70
GS140 3.93 - 15 8.60
GS145 4.43 - 17 9.50
GS150 4.93 - 19 10.40
GS160 5.93 - 23 12.30
Code Closed Height
(m)
Ext. Height (m)
Rungs Weight (kg)
GD220 1.93 2.94 7 9
GD225 2.43 4.20 9 10.90
GD230 2.93 5.20 11 12.70
GD235 3.43 6.20 13 15.00
GD240 3.93 7.20 15 23.10
GD245 4.43 8.20 17 25.90
GD250 4.93 8.95 19 28.60
Code Closed Height
(m)
Ext. Height (m)
Rungs Weight (kg)
GT320 1.93 4.46 7 14.50
GT325 2.43 5.96 9 16.80
GT330 2.93 7.46 11 27.70
GT335 3.43 8.96 13 33.60
GT340 3.93 10.46 15 42.20
34 email: sales@lyteladders.co.uk
NEW GRP Trade Double Extension Ladder • Manufactured with comfortable large “D” shaped rungs• Ideal for all types of trade work• Secure non slip grip with all round PVC moulded feet• Certified to EN131• non-conductive to 30000 volts
Code Closed Height (m)
Extended Height (m)
Rungs Weight (kg)
GFLT230 3.05 5.09 20 14.54
GFLT235 3.66 6.28 24 20.65
GFLT245 4.27 7.47 28 23.38
Trade GRP Extension Ladder
35www.lyteladders.co.uk Sales Tel: 01792 796666
Trade GRP Extension Ladder
36 email: sales@lyteladders.co.uk
Heavy Duty Industrial Extension Ladder
Heavy Duty Extension Ladder 2 & 3 section
• Class 1 Certified to BS2037• These classic heavy-duty ladders are
still probably the strongest commercial ladders available, and are ideal for all professional tradesmen
• Wall-running wheels, interlocking stiles and rope operation makes extension smooth and provides extra strength
• Now fitted with the new comfortable D-shaped rung and solid moulded rubber feet at both ends
• Automatic gravity latch ensures fail-safe locking
HD - Two Section Heavy DutyRope-operated Extension Ladders
HT - Three Section Heavy DutyRope-operated Extension Ladders
Code Closed Height
(m)
Ext. Height (m)
Rungs Weight (kg)
HD235 3.37 5.75 13 20.00
HD240 3.94 7.01 15 23.10
HD245 4.44 8.01 17 26.80
HD250 4.94 8.76 19 29.90
HD255 5.44 9.76 21 37.20
HD260 5.94 10.51 23 45.40
HD270* 6.94 12.51 27 50.40
Code Closed Height
(m)
Ext. Height (m)
Rungs Weight (kg)
HT340 4.44 9.97 15 43.50
HT345 4.94 11.5 17 52.60
HT350 5.44 12.5 19 58.50
HT355* 5.94 13.5 21 64.90
HT360* 6.44 14.94 23 71.20
* Not Kitemarked
* Not Kitemarked
37www.lyteladders.co.uk Sales Tel: 01792 796666
‘C’ Section Ladder
‘C’ Section Ladder
• Heavy duty ‘C’ shaped stiles with non-slip serrated round rungs
• Fully interlocking stiles for safety at extended heights
• Sections can be separated to use independently
• Can be converted to rope-operation • Can be fitted with wall running wheels
Code Closed Height (m)
Open Height
(m)
Rungs Weight (kg)
CS125 2.38 - 9 6.00
CS130 2.88 - 11 7.30
CS135 3.38 - 13 8.60
CS140 3.88 - 15 9.50
CS145 4.38 - 17 11.30
CS150 4.88 - 19 12.30
CS155 5.38 - 21 13.60
CS160 5.88 - 23 15.00
Code Closed Height (m)
Open Height
(m)
Rungs Weight (kg)
CD220 1.88 3.21 7 9.50
CD225 2.38 4.21 9 12.30
CD230 2.88 5.21 11 15.00
CD235 3.38 6.21 13 17.20
CD240 3.88 7.21 15 20.00
CD245 4.38 8.21 17 22.20
CD250 4.88 9.21 19 25.40
CD255 5.38 9.96 21 28.10
CD260 5.88 10.96 23 30.40
Code Closed Height (m)
Open Height
(m)
Rungs Weight (kg)
CT320 1.88 4.08 7 14.50
CT325 2.38 5.58 9 18.10
CT330 2.88 7.08 11 22.20
CT335 3.38 8.58 13 26.30
CT340 3.88 10.08 15 29.90
CT345 4.38 11.58 17 33.60
CT350 4.88 13.08 19 37.70
38 email: sales@lyteladders.co.uk
Aluminium Telecommunications Ladder
• Certified to BS2037 Class1• Unique aluminium ‘butterfly’ rung provides
excellent balance and support at the top of the ladder
• Specifically designed for British Telecom linesmen, this ladder is ideal for working on telegraph poles and street lamps
• Fitted with a double safety catch and a lashing rope to ensure safety when in use
• Nylon rollers fitted to the bases and middle sections enable the operator to erect the ladder with the minimum of effort
Code Closed Height (m)
Open Height
(m)
Rungs Weight (kg)
LE5BEQ 2.50 5.96 8 18.5
Triple Extension Push-up Ladder
39www.lyteladders.co.uk Sales Tel: 01792 796666
Glassfi bre Telecommunications Ladder
• Certified to BSEN131 :1993• Part certified to ANSI A14.5 - 1982• Specifically designed for British Telecom
linesmen, this ladder is ideal to use in environments where electrical hazards exist
• Unique aluminium ‘butterfly’ rung provides excellent balance and support at the top of the ladder
• Fitted with a double safety catch and a lashing rope to ensure safety when in use
• Nylon rollers fitted to the bases and middle sections enable the operator to erect the ladder with the minimum of effort
Code Closed Height (m)
Open Height
(m)
Rungs Weight (kg)
L7EQ 2.50 6.00 8 23.00
Triple Extension Push-up Ladder
Trade Roof Ladders Single and Double sections 41
Industrial Roof Ladders 42
Roof Ladders
41www.lyteladders.co.uk Sales Tel: 01792 796666
Trade Roof Ladders
Trade Roof Ladders
• Lightweight but combines the strength of a trade ladder with a heavy duty ridge hook
• Industrial non-slip rungs & box section stiles• Rubber covered Cylindrical Rungs
distributes weight evenly preventing damage to roof
• Available in single and double sections• Double sections fitted
with safety catches• Full trade roof ladder range
fitted with safety catches
Code Closed Length (m)
Overall Length
(m)
Rungs Weight (kg)
TRL130 - 2.95 11 8.50
TRL135 - 3.45 13 10.00
TRL140 - 3.95 15 11.00
TRL145 - 4.50 17 11.50
TRL150 - 4.97 19 12.00
TRL155 - 5.46 21 13.50
Code Closed Length (m)
Overall Length
(m)
Rungs Weight (kg)
TRL230 2.94 4.64 11+9 14.00
TRL235 3.44 5.64 13+11 16.00
TRL240 3.94 6.64 15+13 18.00
TRL245 4.30 7.67 17+15 20.00
Single Section
Double Section Extension
Manufactured in the Uk from high grade aluminium to ensure strength and stability.
42 email: sales@lyteladders.co.uk
Industrial Roof Ladders
Industrial Roof Ladders
• Manufactured with industrial strength aluminium, with oval section stiles and heavy duty non-slip rungs, incorporating a heavy duty ridge hook
• Rubber covered bearers bars distributes weight evenly to prevent damage to roof surface
• This single section ladder can be extended to a variety of lengths with the use of roof ladder extension pieces
Industrial Roof Ladder Extensions
• Made to the same specifications as the Industrial Roof Ladders
• Supplied with stile spigots and drop nose locking pins for a secure attachment when creating a double section industrial roof ladder
• Industrial Roof Extensions are suitable for the ‘RL’ range only
Code Overall Length (m)
Rungs Weight (kg)
RL1 3.37 12 10.40
RL2 4.43 14 11.30
RL3 4.94 16 12.30
RL4 5.55 18 13.20
Code Overall Length (m)
Rungs Weight (kg)
RLE3 0.90 3 3.20
RLE4 1.20 4 4.10
RLE6 1.80 6 5.90
RLE12 3.60 12 8.60
ACCESSORIES
Ladder Stopper 44
Ladder Stay 44
The Multi Stopper 44
Rubber Suction Feet 45
Articulated Ladder Feet 45
Universal Roof Hook 45
Rack Clamps 45
Ladder Footee 46
Ladder Mat 46
Ladder Pads 46
Lyte Ladder Tags 46
Roof Buddy System 47
SPARES
Step Ladder Feet 48
Ladder Feet 48
Wall Running Wheels 48
Rope Kit 48
Ridge Hook 48
Ladder Accessories and Spares
44 email: sales@lyteladders.co.uk
Ladder Accessories
Ladder Stopper The popular and unique rubber based ladder stabiliser greatly increases the footprint of the ladder, while the aluminium T piece prevents the ladder slipping outwards and also prevents ladders from flipping.CODE: STO18, STO24
Ladder StayNot only does this device increase the width of the extension ladder reducing the risk of ladder twist/slip, also prevents damage to guttering. Also available in V shape.CODE: LLS & LLSV
The MultistopperThis product is manufactured for trade and industrial use and is suitable for ladders up to 22 inches wide and can be used with or without stopper feet. The stopper feet have integrated stile extenders can be fitted permanently or temporarily to any ladder. The feet can be used with or without the base system.CODE: MULTISTOPPER
Used together the feet and base system :
• Helps prevent top movement
• Levels on all surfaces; uneven, sloping and with the base can be used on stairs
• Fastens the stopper base to the ladder
45www.lyteladders.co.uk Sales Tel: 01792 796666
Ladder Accessories
Rubber Suction FeetDesigned to give good grip on shiny/smooth surfacesCODE: C1100
Articulated Ladder FeetLyte non slip articulated feet are ideal for increased safety in most situations - indoors and outside. Designed to fit virtually all ladders.CODE: C1006A
Universal Roof Hook Designed to turn any ladder into a roof ladder. Aluminium hook and wheels and is easily attached.CODE: ARH
Rack ClampsEasy to use clamps designed to lock ladders and steps securely in place whilst on a roof rack. Available with or without padlocks.CODE: C1443A
46 email: sales@lyteladders.co.uk
Ladder Accessories
Ladder FooteeThe Footee has been designed to secure ladders on slimy wet Decking and grass.It’s made from high strength alloy and has excellent corrosion resistance.CODE: LADFOOT
Ladder MatFour mats, made from heavy-duty rubber matting with nodules, are linked by a sturdy metal loop and offer adjustable anti-slip blocking to go under the ladder foot needing extra height. Or can be put under both feet to reduce the risk of slipping or sinking into soft ground.Each mat 24 x 17cm (9” x 6.5”). Maximum extra height 6.5cm (2.5”).CODE: LADDERMAT
Ladder PadsThe essential accessory for Decorators, Shop Fitters, Window Installers, Window Cleaners and the DIY user who cares about his property and his ladder safety.• Universal Fit.• Improves Safety.• Prevents Marking.• Prevents Surface Damage.• Resists Paints, Stains,
Thinners and Solvents.• Reversible Design.CODE: LADDERPADS
Ladder TagsThe best safety tagging system for ladders, steps and podium steps. The Tag Insert records unique ID code of product, plus dates of safety inspections & date of next check. All this is required by the latest Work at Height regulations. The Tag holder can be riveted or cable-tied to the ladder. The pack consists of a holder plus an insert.CODE: LYTETAG & LYTETAGINSERT
47www.lyteladders.co.uk Sales Tel: 01792 796666
Ladder Accessories
The RoofBuddy is a unique product designed and engineered to make work on roofs safer than ever before. Offering a comprehensive 4-point safety system, the RoofBuddy provides an integral safety solution with the highest quality access equipment from Lyte Ladders and Towers.
Package includes:A. Roof Buddy BracketB. Anchor PointsC. Extension Ladder ELT340D. Ladder StayE. Roof LadderF. Fall Arrest Harness KitG. Ladder StopperH. Training Course -H. Specifi cally designed
This unique bracket forms the centre point of the “Safe working system” Manufactured specifically for the Lyte Ladder profile, this bracket “locks” the roof and upright ladder together, thus providing the fixed system.
3 Section extension ladder to access the roof.
Dimensions: Closed height 4.04m Extended height 10.22m
Specially designed double section roof ladder with ridge hook fitted as standard, the hook becomes the Anchor of the system.
Dimensions: Closed height 2.72m Extended height 4.7m
This unique rubber based platform greatly increases the footprint of the ladder, thus helping prevent the base of the ladder from slipping.
These are fitted at the top of the roof ladder near the ridge hook as a safe anchor point for the harness kit.
Not only does this device increase the width of the extension ladder reducing the risk of ladder twist/slip,it also prevents damage to guttering!
This consists of:Full body harness Anchorage line ‘Y’ Link Cowstails slingRocker Karabiners.
Full training on the use of the RoofBuddy system and the safe use of ladders
Roof Buddy - The Package
A
E
B
F
C
G
D
H
The Roof Buddy System
48 email: sales@lyteladders.co.uk
Spares
Step Ladder FeetSolid moulded rubber feet designed to ensure ultimate grip on a variety of floor surfaces
Ladder FeetPVC moulded feet give all round secure footing to the whole ladder range.
Wall Running WheelsReplacement heavy duty solid rubber wheels complete with fixings to be attached.
Rope Kit (not shown)Replacement nylon rope kit for heavy duty extension ladders. When ordering the size of the ladder the kit is for needs to be stated.
Ridge HookReplacement hook for trade and industrial roof ladders.
NEW Lyte Combination Ladder 50
Aluminium and Glassfi bre Combination Ladder 51
NEW Lyte 3 Way Ladder 52
Lyte Telescopic Ladder System 53
Aluminium and Glassfi bre Multi Purpose Ladder 54
Lyte 5 Way Platform Ladder 55
Multi Purpose Ladders
50 email: sales@lyteladders.co.uk
Lyte Professional Combination Ladder
• Our best selling trade ladder reinvented as a multi functional combination ladder
• Versatile use as either a 2 or 3 section ladder, double sided step, extended step ladder or for use on stairs (6 & 9 TREAD ONLY)
• Certified to BSEN131• Large comfortable ‘D’ shaped rungs
for comfort and stability • Strong box section stiles• Large stabiliser bar• Solid sidearms increase stability• Suitable for regular trade use
Code Rungs per section
Closed height (m)
'A' frame height (m)
Extended step height
(m)
Extension Ladder Length
(m)
Product Weight
(kg)
LCL6 6 1.86 1.78 2.83 4.1 14.4
LCL9 9 2.69 2.57 4.15 6.1 20.3
*LCL12 12 3.54 3.36 5.55 8.4 25.2
Lyte Combination Ladder
*LCL12 comes with nylon strap
51www.lyteladders.co.uk Sales Tel: 01792 796666
Combination Ladders
Aluminium Combination Ladder
• Combines a stepladder and extension ladder in one product
• Unique sliding mechanism for easy conversion to all three ways
• Wide base and heavy duty feet for stability and grip
• Non-slip rungs for comfort and security
• Compact folded dimensions for easy transportation and storage
• Stabilisers for extra stability• Suitable for a wide variety of uses• Suitable for trade and
domestic use• Certified to EN131
Glassfi bre Combination Ladder
• Non conductive – ideal for use where electrical hazards may exist
• Combines a stepladder and extension ladder in one product
• Suitable for a variety of uses, both domestic and trade
• Non-slip treads for comfort & security• Wide base for added stability and grip
Code Closed Length
(m)
Stepladder Height (m)
Extension Ladder
Length (m)
Product Weight
(kg)
GFCL6 1.68 2.39 3.28 13.55
GFCL7 1.96 2.92 4.12 15.45
Code Closed Length
(m)
Extended stepladder height
(m)
Extension Ladder Length (m)
Product Weight
(kg)
CL6 1.71 2.43 3.39 9.15
CL7 1.99 2.95 4.23 10.55
CL8 2.27 3.48 5.07 12.6
CL9 2.56 4 5.92 15.1
CL10 2.84 4.25 6.48 15.55
CL11 3.12 4.77 7.32 19
CL12 3.4 5.59 8.44 23
52 email: sales@lyteladders.co.uk
Code Closed Length (m) Stepladder Height (m)
Extension Ladder Height (m)
Stairway Step Ladder (m)
Product Weight (kg)
L3W 1.78 1.68 2.59 1.5 5.8
Lyte 3 Way Ladder
Lyte 3 Way Ladder
• Versatile, multifunction ladder operates as 3 ladders in one. Can be used as a step ladder, extension ladder or for use on stairs.
• Sturdy locking hooks made from galvanized steel
• Certified to BS2037 Class 1• Suitable for trade and DIY use• Multiple use product - Step ladder,
extension ladder & Stairway step ladder
• Stabiliser bar and secure locking hinge for added support and safety
• Light and easy to use, store and transport
• Max permissible load 150kg
53www.lyteladders.co.uk Sales Tel: 01792 796666
Telescopic Ladder System
• Adjustable, telescopic sections and simple ‘Click-Lock’ hinge system
• Can be used as a stepladder, stairwell ladder and extension ladder
• Compact folded dimensions, very easy to use, transport and store
• Non-slip feet and splayed base for extra stability
• Suitable for professional and domestic use• Tested to EN131
Code Sections x rungs
Stepladder Height (m) Extension Ladder Height (m)
Product Weight (kg)
TLS4x3 4x3 1.02 - 1.6 2.01 - 3.2 10.8
TLS4x4 4x4 1.3 - 2.17 2.66 - 4.43 13.7
Telescopic Ladders
54 email: sales@lyteladders.co.uk
Multi Purpose Ladder
Aluminium Multi Purpose Ladder
• Compact dimensions for easy transportation and storage
• Removable platform (4x3 only) MPL4x4 does not have a platform and cannot be used in the trestle position.
• Stabilisers for extra stability• Simple ‘click lock’ hinge system• Suitable for wide variety of uses• Suitable for trade and domestic use• EN131
• Suitable for use where electrical hazards may exist
• Can be used as a stepladder, extension ladder and more
• Stabilizers for added stability• Easy to use ‘click & lock’
hinge system• Easy to transport and store• Suitable for trade and DIY use
Glassfi bre Multi Purpose Ladder
Code Stepladder Height (m)
Platform Height
(m)
Extension Ladder (m)
Weight (kg)
MPL4X3 1.75 0.92 3.56 13.95
MPL4X4 2.27 N/A 4.68 15.55
Code Stepladder Height (m)
Extension Ladder (m) Weight (kg)
GFMPL4X3 1.75 3.56 15.3
MPL4X3 MPL4X4 MPL4X4
55www.lyteladders.co.uk Sales Tel: 01792 796666
5 Way Ladder
Lyte 5 Way Platform Ladder
• Lyte 5 way system combines 2 single ladders, extension ladder, step ladder, work platform and stairway ladder and platform all in one
• Quick and easy to use • Large non slip platform• Handrail for added safety• Max permissible load 150kg
Code Ladders rungs
Base to platform of mini scaffold
(m)
Closed height of ladder
sections (m)
Stepladder height
(m)
Extension ladder
height (m)
Max achievable height (extension
ladder) (m)
Weight(kg)
HD628 2x6 0.97 1.69 1.63 2.72 3.82 18
56 email: sales@lyteladders.co.uk
Fixed Industrial Steps 57
Aluminium Warehouse Steps 58
Steel Warehouse Steps 59
Store Steps 60
Warehouse & Facilities Access
57www.lyteladders.co.uk Sales Tel: 01792 796666
Code Height to Platform (m)
Rungs Weight (kg)
L3 0.73 3 6.50
L4 0.98 4 8.00
L5 1.22 5 9.00
Code Height to Platform (m)
Rungs Weight (kg)
LD3 0.73 3 7.50
LD4 0.98 4 9.00
LD5 1.22 5 11.00
Fixed Industrial Steps
• Manufactured with industrial strength aluminium
• Non-slip treads and a large non-slip platform provides a solid safe working area
• Single sided step with optional handrails & handposts
• Also available as a double sided step
Fixed Industrial Steps
Available with handrails if required, please call for details
58 email: sales@lyteladders.co.uk
Aluminium Warehouse Steps
Warehouse Steps
• Manufactured with industrial strength aluminium
• Ideal for warehouse and factory use• Heavy duty back support• Ergonomic back rail support
and side handrails• Rear wheels for easy positioning• Additional bracing ensures a robust product• WS8-14 are supplied as a flat pack
Code Open Height to Platform
(m)
Rungs Weight (kg)
WS4 1.00 4 9.90
WS5 1.22 5 11.30
WS6 1.46 6 12.70
WS7 1.71 7 14.50
WS8 1.95 8 15.90
WS10 2.44 10 20.00
WS12 2.93 12 23.60
WS14 3.42 14 26.80
59www.lyteladders.co.uk Sales Tel: 01792 796666
Steel Warehouse Steps
• Platform Size: 450 W x 500 D mm• Handrail Height: 1000mm• Expanded Steel Tread Size:
450 W x 145 D mm• 2 x 200mm black rubber tyred
wheels• Intermediate rail and kick
boards around the platform• Grip Lift Mechanism
to make the steps mobile with the use of retractable castors
Model Code Description Platform Height (mm)
No of Steps
Overall H x W x D (mm)
Weight (kg)
SWS510 2 Step without Handrail 500 2 580 x 560 x 575 8
SWS511 2 Step with 1 Handrail 500 2 960 x 560 x 575 9
SWS512 2 Step with Full Handrail 500 2 960 x 560 x 575 10
SWS513 3 Step with Full Handrail 750 3 1460 x 560 x 725 13
SWS514 4 Step with Full Handrail 1000 4 1710 x 560 x 875 16
SWS515 5 Step with Full Handrail 1250 5 1960 x 610 x 1025 21
Model Code
Platform Height (mm)
No of Steps
Overall H x W x D (mm)
Weight (kg)
SMS03 750 3 1750 x 700 x 1095 41
SMS04 1000 4 2000 x 700 x 1240 44
SMS05 1250 5 2250 x 850 x 1385 47
SMS06 1500 6 2500 x 880 x 1530 50
SMS07 1750 7 2750 x 930 x 1675 53
SMS08 2000 8 3000 x 950 x 1820 56
SMS09 2250 9 3250 x 970 x 1965 59
SMS10 2500 10 3500 x 1000 x 2110 62
SMS11 2750 11 3760 x 1100 x 2405 78
SMS12 3000 12 4010 x 1150 x 2550 83
SMS13 3250 13 4260 x 1200 x 2695 88
SMS14 3500 14 4510 x 1250 x 2840 93
SMS15 3750 15 4760 x 1300 x 2985 98
Steel Warehouse Steps
Steel Warehouse Steps with Dome Feet
• These steps glide effortlessly across floors, but once body weight is applied they remain firmly in position
• Non-slip rubber all weather treads• Tread Size: 400 x 150mm• Platform Size:
400 W x 300 D mm• Strong steel dome feet enclose
the spring-loaded castor
60 email: sales@lyteladders.co.uk
Store Step
Wide Store Step
• Industrial heavy duty step with wide platform • Parcel shelf • Rear wheels fitted for easy transportation
Store Stepladder
• Versatile step ladder with added parcel shelf
• Double riveted with K straps for additional strength and stability
• Non slip treads and rubber feet
• Perfect for shop, stock room and warehouse use
Code Treads Closed Height
Open Height
Platform Height
AKS3 2 plus 1 top shelf 1.41m 1.25m 0.51m
Code Treads Open Height Platform Height
ASF6 6 1.46 2.16
ASF8 8 1.95 2.47
Ladda-Steps 62
Fruit Picking Tripod 63
Shelf Ladder 64
Surveyors Ladder 64
Loft Ladders 65 - 67
Specialist Ladders
62 email: sales@lyteladders.co.uk
Ladda-Steps
Ladda-Steps
• As its name suggests this versatile piece of access equipment can be used as a ladder and a step
• It’s easy to convert with uncomplicated locks• Made from industrial material it provides
a durable solution to access problems
Code Open Height as Step (m)
Open Height as
Ladder (m)
Treads Weight (kg)
LS6/4 1.48 2.55 6+4 7
LS7/5 1.72 3.07 7+5 8
LS8/6 1.98 3.62 8+6 9
63www.lyteladders.co.uk Sales Tel: 01792 796666
Fruit Picking Tripod
• Constructed from industrial duty aluminum and used by professional groundsmen
• Allows the user to work close to hedges, bushes and trees with rear spiked support.
• Channel section side stiles fitted with 3” / 76mm deep non-slip treads and rubber feet at base.
• Heavy duty rear leg is hinged at the top and fitted with a sturdy ground spike for extra safety. Additional interchangeable non-slip rubber foot also supplied for safe use on hard surfaces, available on request only.
• Lightweight, mobile, yet very strong. A must for all serious professionals.
Fruit Picking Tripod
Code Open Height as Step (m)
Open Height as Ladder
(m)
Treads (Not including the top)
Weight (kg)
FPT1 1.72 1.90 5 7
FPT2 2.21 2.48 7 9
FPT3 2.93 3.21 10 12
FPT4 3.53 3.91 12 15
FPT5 3.92 4.17 14 19
64 email: sales@lyteladders.co.uk
Shelf Ladder
Code Overall Length (m)
Work Height
(m)
Treads Weight (kg)
SX5 1.34 1.20 5 3.50
SX6 1.60 1.46 6 4.00
SX7 1.86 1.71 7 4.50
SX8 2.12 1.95 8 5.00
SX9 2.39 2.20 9 5.90
SX10 2.65 2.44 10 6.40
SX11 2.92 2.68 11 7.30
SX12 3.18 2.93 12 7.70
SX13 3.45 3.17 13 8.60
Code Length open Length closed Number of sections
Rungs Weight (kg)
SU1 0.92 0.92 1 3 2.00
SU2 1.8 1.04 2 6 4.10
SU3 2.7 1.04 3 9 5.90
SU4 3.6 1.04 4 12 8.20
SU5 4.5 1.04 5 15 10.00
SU6 5.4 1.04 6 18 11.80
Shelf Ladder
• Specifically designed for access to and from shelving units
• Lightweight but extremely rigid • Timber cross rail fitted as standard,
shafting hooks fitted on request
Sectional ‘Surveyors’ Ladders
• Interlocking sectional ladders, manufactured in oval section with serrated rungs
• Very easy to use, designed for inspection purposes only and can be easily stored in the boot of a car
• Each section is supplied with aluminium locating spigots, which are inserted into the stiles of the next section
• Safe, light ladder that can extend to 5.4 m
65www.lyteladders.co.uk Sales Tel: 01792 796666
Loft Ladders
Code Sections Max. Floor to fl oor
Min. Loft clearance Min. Loft opening
LEL2 2 2.67m 1.25m 457 x 560mm
LEL3 3 3m 1.05m 432 x 508mm
LYTE EASILOFT2 and 3 Section Loft Ladders
• Factory assembled - installs in minutes• Certified to BSEN14975:2006• Clear and easy to follow instructions• Box section styles for strength and comfort• Spring loaded catches, safer and stronger• Handrail included on two and three section• Non slip rubber feet for safety• Maximum load 150kg
2.67m MAX
MINLoft clearanceRequired1250mm
MINLoft opening457mm wide560mm long
MAXGround floorto loft floorheight 2.67m
3.0m MAX
MINLoft clearanceRequired1050mm
MINLoft opening432mm wide508mm long
MAXGround floorto loft floorheight 3.0m
Easiloft LEL2 Easiloft LEL3
Easiloft
Aluminium
66 email: sales@lyteladders.co.uk
2.67m MAX
MINLoft clearanceRequired1250mm
MINLoft opening457mm wide560mm long
MAXGround floorto loft floorheight 2.67m
3.0m MAX
MINLoft clearanceRequired1050mm
MINLoft opening432mm wide508mm long
MAXGround floorto loft floorheight 3.0m
Lyte Deluxe Easiloft DLEL2 Lyte Deluxe Easiloft DLEL3
Lyte Deluxe Easiloft
LYTE DELUXE EASILOFT2 and 3 Section Loft Ladders
• Slim and compact design for easy storage in the loft
• Spring assisted arm inside the loft which allows total control when lowering or storing the loft ladder
• Manufactured to fit most loft hatches• Comfortable handrail for added safety• Installation instructions and user guide
included Certified to BS EN14975
Code Sections Max. Height
Min. Height
Pitch Vertical Pitch
Min. Internal Loft Height
Max. Permitted
Static Load
DLEL2 2 2.67m 1.25m 457 x 560mm 280mm 1380mm 150kg
DLEL3 3 3m 1.05m 432 x 508mm 280mm 1010mm 150kg
Easiloft
Aluminium
67www.lyteladders.co.uk Sales Tel: 01792 796666
Lyte Wooden Easiloft
LYTE TIMBER EASILOFT3 and 4 Section Loft Ladders
• Continuous seal around trap door reduces heat loss
• White 26mm Thick Insulated Trapdoor• Dovetail Joints for added durability• Fully assembled and easy to install• Slip resistant treads
For more information and measurements please call us on 01792 796666
Code Sections LadderWidth
InsideLadderWidth
TreadDepth
TreadThickness
Max Floor
To Floor
Weight Max. Permitted
Static Load
LELW3 3 0.37m 0.33m 0.08m 0.02m 2.80m 26.6kg 150kg
LELW4 4 0.37m 0.33m 0.08m 0.02m 2.80m 26kg 150kg
Sections Width Length Height
3 0.55m 1.13m 0.13m
4 0.55m 0.90m 0.21m
Case
Easiloft
Timber
Work Platform 69
Glassfi bre Work Platform 69
Hop Up Aluminium Platform 69
Lyte HIPOD Podium Steps 70 - 71
PAS 250 72
Lyte Podium Steps 73 - 74
Mobile Working Platforms 75
Telescopic Working Platforms 76
Low Level Access
HI
69www.lyteladders.co.uk Sales Tel: 01792 796666
Work Platforms
Code Platform Width (mm)
Platform Length (mm)
Platform Height (mm)
Weight (kg)
WPS1 300 600 480 4.65
WPS2 300 1000 480 5.60
Low Level Work Platforms
• Simple and safe to use with locking hinges for added safety
• Non slip platform • Perfect for all odd jobs • Compact folded dimensions • Lightweight - easy to transport • Tested to EN131 • Available in 2 lengths, 600mm
and 1000mm
• 600mm x 600mm platform for comfortable working area
• Ideal locking design• Suitable for use in environments
where electrical hazards exist
Glassfi bre Low Level Work Platforms
Hop Up Aluminium Platform
• 600mm x 600mm platform for comfortable working area
• Lightweight (6.8kg) - Easy to transport
• 150kg Load capacity• Non Slip platform • Perfect for all odd jobs • Tested to EN131 • Simple and safe to use with
locking hinges for added safetyCode: SQWPS
GFWP1mm mm mm Approx. Wt(kg)
Max. 150 kg470 945 690 7.7
70 email: sales@lyteladders.co.uk
Lyte HIPOD Podium Steps
The HIPOD range of podiums has been developed by Lyte Ladders & Towers to meet the PAS250 standard introduced in 2013. The range of HIPODs is a further extension of our HiLyte tower products and is a range of innovative low level platforms, unlike any already on the market.
Lyte have manufactured the HIPODs with the customer in mind. As well as making sure that every part of the standard has been taken into account when manufacturing the product, we have also taken on board the opinions of our customers, making sure it is a product designed for practical use.
HIPOD Weight (kg)
MAXIMUM WORKING PLATFORM HEIGHT
(mm)
MAXIMUM WORKING HEIGHT
(mm)
Open Depth(mm)
Width(mm)
Closed Depth(mm)
Height(mm)
1000 56 700-950 2700-2950 1280 760 560 1980
1200 70 950-1200 2950-3200 1410 760 560 2230
1500 80 1250-1500 3250-3500 1600 760 560 2540
LYTE PAS250 PODIUM STEPS
HI PAS250
71www.lyteladders.co.uk Sales Tel: 01792 796666
Lyte HIPOD Podium Steps
WHY THE HIPOD?There are many valuable qualities to purchasing and using the HIPOD range of products. Both podiums have an anti-surf option and we have made sure that this can be easily adjusted by the user. With no loose or extra fittings the user can disengage 2 of the castors and replace with a slot in anti-slip foot, where required. As work environments vary so much, we believe this is an important feature.
Both podiums are available with a quick fit anti-surf option and can be easily adapted by the user without the need for any specialist tools.
HIPODs are designed for easy use, transportation and storage.
THE HIPOD 1000This podium has an adjustable platform height of 960mm and 710mm. The HIPOD has been manufactured with ease of use in mind and so the industrial ballasts that have been manufactured for the product eradicate the need for stabilisers, but still ensuring that the product stays safe and secure. The HIPOD 1000 is our most versatile welded product as it fits easily through standard door frames, without the need to tilt it.
THE HIPOD 1200 & 1500 These podiums also have an adjustable platform heights, HIPOD1200 has attainable heights of 950mm and 1200mm and the HIPOD1500 heights of 1510mm and 1260mm. A unique design feature of the HIPOD 1500 & 1200 is the use of cleverly positioned ballasts eradicating the need for additional stabilisers and still allows it to fit through a standard doorway, while still erected.
72 email: sales@lyteladders.co.uk
PAS 250
Q: What is PAS 250?
A:PAS 250 is a Publicly Available Specifi cation (PAS) for a low-level work platform with one working platform with side protection for use by one person with a maximum working platform height of less than 2.5 m. These products, commonly referred to as podiums or pulpits, became extensively used following the implementation of The Work at Height Regulations.
Q: WHY WAS PAS 250 NEEDED?
A: Designs that emerged for this type of low level work platform (LLWP) have been developed in the absence of a formal standard. Whilst the majority of LLWPs provide a safe solution to low level access, there are aspects of some products that could be improved by adherence to relevant and specifi c design criteria.
Therefore PASMA, the Prefabricated Access Suppliers’ and Manufacturers’ Association, has sponsored the development of this PAS to provide minimum safety and performance criteria for these products.
Q: WHAT PRODUCTS DOES PAS 250 COVER?
A: Low-level work platforms with one working platform with side protection for use by one person with a maximum working platform height of less than 2.5 m. These products are commonly referred to as podiums or pulpits.
Q: WHAT PRODUCTS ARE NOT COVERED BY PAS 250?
A:• Mobile access and working towers specifi ed by BS EN 1004
because LLWPs have working platform heights of less than 2.5 m.
• Mobile elevating work platforms specifi ed in BS EN 280 because LLWPs are not powered. Room scaff olds specifi ed in BS 1139-6 because LLWPs have smaller working platforms and are only designed for use by one person.
• Standing ladders with platforms specifi ed in BS EN 131, BS 2037 and BS 1129 and Hop Up type platforms because LLWPs have side protection to the working platform.
PAS250
73www.lyteladders.co.uk Sales Tel: 01792 796666
LYTEPOD
Lyte Podium Steps
• Only 2 removable parts: Platform deck and access ladder
• Certified to EN:8620 (PAS250)• Saloon gates for easy access
and egress. Stoppers for extra safety• All models have 2 platform height• Anti-surf as standard• Lightweight• Available in 3 different sizes• Compact folding dimensions• Toe boards optional• Non removable stabilisers
PAS250
2 2
Only 2 Removable Parts
Compact Folding Dimensions
All Models Have 2 Platform Heights
Saloon Gates For Easy Access And Egress
74 email: sales@lyteladders.co.uk
LYTEPOD
Code Platform Height Overall Height Width Weight
LYTEPOD10X (1M)
725 or 975mm 2010mm 670mm 37Kg
LYTEPOD12X(1.2M)
975 or 1225mm 2260mm 670mm 40Kg
LYTEPOD15X(1.5M)
1225 or 1475mm 2510mm 670mm 43Kg
PAS250
75www.lyteladders.co.uk Sales Tel: 01792 796666
Mobile Working Platforms
Lyte 3 and 4 Tread Mobile Working Platforms
• Splayed base for extra stability• 2 aluminium guardrails with
steel safety chain• 2 tool trays • Fold away tool tray
and guardrails• Folds down completely
for easy storage• Non slip platform with fitted
all round toeboards• Plastic wheels attached at the
back for easy movement when folded
Lyte 5, 6 and 7 Tread Mobile Working Platforms
• Splayed base and stabilisers to ensure all round comprehensive stability
• 2 aluminium guardrails with steel safety chain
• 2 tool trays • Fold away tool tray
and guardrails• Folds down completely
for easy storage• Non slip platform with
fitted all round toeboards• Plastic wheels attached
at the back for easy movement when folded
Code No of Treads
PlatformHeight
(m)
MaxWorking
Height (m)
OverallHeight
(m)
Width(m)
Max Width Stabilisers
(m)
Closed Dimensions (m)
Weight(kg)
LYT3 3 0.70 2.70 1.70 0.79 N/A 1.70X0.30X0.79 15.60
LYT4 4 0.91 2.91 1.91 0.88 N/A 1.91X0.30X0.88 16.20
Code No of Treads
PlatformHeight
(m)
MaxWorking
Height (m)
OverallHeight
(m)
Width(m)
Max Width Stabilisers
(m)
Closed Dimensions (m)
Weight(kg)
LYT5 5 1.20 3.20 2.20 0.62 2.00 2.20X0.30X0.62 24.20
LYT6 6 1.45 3.45 2.45 0.62 2.25 2.45X0.30X0.62 24.90
LYT7 7 1.70 3.70 2.70 0.62 2.25 2.70X0.30X0.62 26.10
76 email: sales@lyteladders.co.uk
Telescopic Working Platforms
Lyte Telescopic Mobile Working Platforms
• Splayed base and stabilisers to ensure all round comprehensive stability
• 2 aluminium guardrails with steel safety chain
• 2 tool trays • Fold away tool tray
and guardrails• Folds down completely
for easy storage• Non slip platform
with fitted all round toeboards
• Plastic wheels attached at the back for easy movement when folded
• Telescopic legs for adjustable working heights
Code No of Treads
PlatformHeight (m)
Max Working
Height (m)
OverallHeight
(m)
Width (m)
Max Width Stabilisers
(m)
Closed Dimensions
(m)
Weight (kg)
LYTPLS COP3/5
3 to 5 0.80-1.06-1.31 3.31 2.06 0.67 2.22 2.06x0.75x0.42 28.50
LYTPLS COP4/7
4 to 7 1.07-1.32-1.58-1.83 3.83 2.35 0.67 2.48 2.35x0.75x0.42 32.00
LYTPLS COP6/9
6 to 9 1.54-1.79-2.05-2.30 4.30 2.87 0.67 2.83 2.87x0.75x0.42 37.00
Stagings 78
Trestles 79
Stagings and Trestles
78 email: sales@lyteladders.co.uk
Stagings
Lightweight Staging Boards -Standard Width and Extra Wide
• Manufactured to BS2037 Class1• Can be used in conjunction with
various handrail systems• Available in 2.4m to 7.2m• Non slip rot proof decking• Rubber inserts for additional grip• Aluminium struts• Rubber end caps• “K” straps – fitted to end struts
Code Width (mm) Length (m) Weight (kg)
PRO24 450 2.40 13.00
PRO30 450 3.00 15.30
PRO36 450 3.60 19.50
PRO42 450 4.20 22.00
PRO48 450 4.80 23.50
PRO54 450 5.40 33.00
PRO60 450 6.00 36.00
PRO66 450 6.60 44.00
PRO72 450 7.20 47.00
Code Width (mm) Length (m) Weight (kg)
PROEX24 600 2.40 17.40
PROEX30 600 3.00 20.50
PROEX36 600 3.60 26.20
PROEX42 600 4.20 29.50
PROEX48 600 4.80 31.50
PROEX54 600 5.40 44.50
PROEX60 600 6.00 48.50
PROEX66 600 6.60 59.30
PROEX72 600 7.20 63.40
79www.lyteladders.co.uk Sales Tel: 01792 796666
Trestle - Suitable for Both450mm and 600mm Boards
• Tested and certified to BS2037 Class1• Available in various configurations for
use with other trestles• Designed for everyday heavy use
Code Open Height (m)
Weight (kg)
PTP1 1.74 12.70
PTP2 2.3 15.90
PTP3 2.9 20.00
PTP4 3.5 23.60
Industrial handrail systems are available, please call for details
Trestles
GRP Lift System 81 - 82
Lift System 83 - 84
SKUFFS 84
NEW Hilyte Leader GRP 500 85 - 88
Improved Hilyte 500 89 - 91
Improved Hilyte 250 92 - 94
Stairlyte Tower 95
Bespoke Access Products 96
Towers
81www.lyteladders.co.uk Sales Tel: 01792 796666
GRP LIFT
THE LYTE INDUSTRIAL FOLDING TOWER SYSTEM FROM THE HILYTE RANGE...
82 email: sales@lyteladders.co.uk
GRP LIFT
The NEW GRP LYTE INDUSTRIAL FOLDING TOWER SYSTEM
Product Code Description Quantity 1.2m Quantity 2.1m
GDLC 150mm Dual Locking Castors 4 4
GFTBU Folding Tower Base Unit 1 1
G2RGRF Guardrail Frame 0 2
GHD14 1.4m GRP Hatch Deck 1 1
GHB14 1.4m GRP Horizontal Brace 4 5
GDB21 1.7m GRP Diagonal Brace 1 1
GTBL18/ALU/SW Folding Toeboard 1 1
GPSU Standard Stabiliser Unit 0 4
• Patented Fail Safe Joint system
• Non-conductive/Sparking/Corroding/Oxidising
• Impact resistant brace claws• Easily identifiable braces for
ease of assembly• Suitable for use in challenging areas or any zone 1 environment• Integral Ladder system• Platform deck edge protection is made up of GRP profile• Available at two platform heights of 1.4m and 2.1m• Available at a length of 1.4m and width of 740mm
83www.lyteladders.co.uk Sales Tel: 01792 796666
Lyte Industrial Folding Tower System - LIFT
• Base can be used alone or increased using extra components to achieve 7 additional heights
• Tested and certified to BSEN1004:2004• Fits easily into most small vans or estate cars• Quick and easy to erect – saving time
on each job• Narrow tower width – compact & easy storage• Quick release pull rings with stainless steel pin
on all bracings for easy assembly• Smooth & ribbed texture on braces
for quick identification• 3T compatible
* Please remember - a thorough risk assessment must be carried out prior to any work being undertaken at height
Lift System
84 email: sales@lyteladders.co.uk
Lift System
SKUFFSSKUFFS have been introduced to the Lyte Tower accessory range in order to help protect fixtures and fittings during construction maintenance work.
SKUFFS are compatible with a range of equipment including low-level access such as podiums etc., aluminium towers, mobile elevated platforms and system scaffold.
SKUFFS are manufactured from a fire retardant foam designed to absorb the force of impact and can be designed for bespoke applications.
SKUFFS are easy to fit and are incredibly cost effective.
SKUFFS are 100mm high x 250mm wide
Platform Height (Max) 0.6m 1.6m 2.1m 3.1m 3.6m 4.6m 5.1m 6.1m
125mm Dual Locking Castors
4 4 4 4 4 4 4 4
Folding Tower Base Unit
1 1 1 1 1 1 1 1
1.0m Additional Frame
0 2 0 2 0 2 2 0
1.5m Additional Frame
0 0 2 2 4 4 2 2
2.0m Additional Frame
0 0 0 0 0 0 2 4
1.8m Additional Hatch Deck
1 1 1 2 2 2 2 3
1.8m Horizontal Brace 4 5 5 9 9 9 9 13
2.1m Diagonal Brace 0 1 2 3 3 4 5 6
1.8m Toe board Length
0 2 2 2 2 2 2 2
Toe board End Single Width
0 2 2 2 2 2 2 2
Standard Stabiliser Unit
0 0 4 4 4 0 0 0
Telescopic Stabiliser Unit
0 0 0 0 0 4 4 4
85www.lyteladders.co.uk Sales Tel: 01792 796666
HiLyte Leader GRP
THE GRP MOBILE ACCESS TOWER FROM THE HILYTE RANGE...
GRP
86 email: sales@lyteladders.co.uk
HiLyte Leader GRP
GRP
The NEW Leader in GRP
• Patented fail safe joint system• Non-conductive/sparking • Non corroding • Non oxidising • Tested to EN1004:2004• Integral ladder system• Available in 1.8m and 2.5m*• 2 widths available 0.85m &
1.45m (single & double width)• Suitable for use in challenging areas
or any zone 1 environment• Easily identifiable braces for ease of assembly• Impact resistant brace claws• Maximum safe working platform load of 200kg
(double width 400kg)• Platform deck edge protection is made up of GRP profile
* 2.5m available, please ask for details
87www.lyteladders.co.uk Sales Tel: 01792 796666
HiLyte Leader GRP
Hily
te G
RP
500
To
wer
Sin
gle
Wid
th C
om
po
nen
t S
ched
ule
3T
Sin
gle
Wid
th -
P
latf
orm
Hei
ghts
2.
22.
73.
23.
74.
24.
75.
25.
76.
26.
77.
27.
78.
28.
79.
29.
710
.210
.711
.211
.712
.2
Dua
l Loc
king
Cas
tors
44
44
44
44
44
44
44
44
44
44
4
Ad
just
able
Leg
Uni
t4
44
44
44
44
44
44
44
44
44
44
2 R
ung
Sin
gle
Wid
th
Gua
rdra
il Fr
ame
1-
-1
1-
-1
1-
-1
1-
-1
1-
-1
1
2 R
ung
Sin
gle
Wid
th
Lad
der
Fra
me
1-
-1
1-
-1
1-
-1
1-
-1
1-
-1
1
3 R
ung
Sin
gle
Wid
th
Lad
der
Fra
me
-1
-1
-1
-1
-1
-1
-1
-1
-1
-1
-
3 R
ung
Sin
gle
Wid
th
Sp
an F
ram
e-
1-
1-
1-
1-
1-
1-
1-
1-
1-
1-
4 R
ung
Sin
gle
Wid
th
Lad
der
Fra
me
11
21
22
32
33
43
44
54
55
65
6
4 R
ung
Sin
gle
Wid
th
Sp
an F
ram
e1
12
12
23
23
34
34
45
45
56
56
1.8m
Hat
ch D
eck
12
22
23
33
34
44
45
55
56
66
6
1.8m
Hor
izon
tal B
race
66
1010
1014
1414
1418
1818
1822
2222
2226
2626
26
2.1m
Dia
gona
l Bra
ce3
55
77
99
1111
1313
1515
1717
1919
2121
2323
1.8m
Toe
boa
rd F
old
ing
11
11
11
11
11
11
11
11
11
11
1
Sta
ndar
d S
tab
ilise
r U
nit
44
44
44
44
--
--
--
--
--
--
-
Larg
e S
tab
ilise
r U
nit
--
--
--
--
44
44
44
44
44
44
4
Component Schedule based on 3T specification
88 email: sales@lyteladders.co.uk
HiLyte Leader GRP
Component Schedule based on 3T specification
Hily
te G
RP
500
To
wer
Do
ub
le W
idth
Co
mp
on
ent
Sch
edu
le3
T
Dou
ble
Wid
th -
P
latf
orm
Hei
ghts
2.
22.
73.
23.
74.
24.
75.
25.
76.
26.
77.
27.
78.
28.
79.
29.
710
.210
.711
.211
.712
.2
Dua
l Loc
king
Cas
tors
44
44
44
44
44
44
44
44
44
44
4
Adju
stab
le L
eg U
nit
44
44
44
44
44
44
44
44
44
44
4
2 Ru
ng D
oubl
e W
idth
G
uard
rail
Fram
e1
--
11
--
11
--
11
--
11
--
11
2 Ru
ng D
oubl
e W
idth
La
dder
Fra
me
1-
-1
1-
-1
1-
-1
1-
-1
1-
-1
1
3 Ru
ng D
oubl
e W
idth
La
dder
Fra
me
-1
-1
-1
-1
-1
-1
-1
-1
-1
-1
-
3 Ru
ng D
oubl
e W
idth
Sp
an F
ram
e-
1-
1-
1-
1-
1-
1-
1-
1-
1-
1-
4 Ru
ng D
oubl
e W
idth
La
dder
Fra
me
11
21
22
32
33
43
44
54
55
65
6
4 Ru
ng D
oubl
e W
idth
Sp
an F
ram
e1
12
12
23
23
34
34
45
45
56
56
1.8m
Sta
ndar
d D
eck
11
11
11
11
11
11
11
11
11
11
1
1.8m
Hat
ch D
eck
12
22
23
33
34
44
45
55
56
66
6
1.8m
Hor
izon
tal B
race
66
1010
1014
1414
1418
1818
1822
2222
2226
2626
26
2.1m
Dia
gona
l Bra
ce3
55
77
99
1111
1313
1515
1717
1919
2121
2323
1.8m
Toeb
oard
Len
gth
11
11
11
11
11
11
11
11
11
11
1
Stan
dard
Sta
bilis
er U
nit
44
44
44
44
--
--
--
--
--
--
-
Tele
scop
ic S
tabi
liser
Uni
t-
--
--
--
-4
44
44
44
44
44
44
89www.lyteladders.co.uk Sales Tel: 01792 796666
Hilyte 500
Hilyte 500• Tested and certified to
BSEN1004:2004• Dual brake on/off system• Quick release pull rings with
stainless steel pin on all bracings• Smooth & ribbed tubing on braces
for quick identification• Wide ladder with hexagonal rung
for easier climb & additional safety• Large, articulated rubber feet on
all stabilisers 3T compatible
Technical Specifi cation• Two widths available 1.45m & 0.85m• Three lengths available 1.8m 2.5m & 3.2m• Extruded tube diameter 50.8mm• Extruded tube thickness 1.6mm• 3mm Frame spigots• Extruded aluminium ladder stile & rung• Heat treated gravity castings• Stainless steel bracing lock pins• Articulated rubber feet• Spring steel frame lock clips• Reinforced platforms
90 email: sales@lyteladders.co.uk
Hily
te 5
00 T
ow
er S
ing
le W
idth
Co
mp
on
ent
Sch
edu
leIn
tern
al o
r ex
tern
al w
ork
(m)
Inte
rnal
wor
k on
ly (m
)
Sin
gle
Wid
th -
P
latf
orm
Hei
ghts
1.
21.
72.
22.
73.
23.
74.
24.
75.
25.
76.
26.
77.
27.
78.
28.
79.
29.
710
.210
.711
.211
.712
.2
150m
m d
ual l
ocki
ng
cast
or4
44
44
44
44
44
44
44
44
44
44
44
Ad
just
able
leg
44
44
44
44
44
44
44
44
44
44
44
4
2 ru
ng s
pan
fram
e-
11
--
11
--
11
--
11
--
11
--
11
2 ru
ng la
dd
er fr
ame
-1
1-
-1
1-
-1
1-
-1
1-
-1
1-
-1
1
3 ru
ng s
pan
fram
e-
1-
1-
1-
1-
1-
1-
1-
1-
1-
1-
1-
3 ru
ng la
dd
er fr
ame
-1
-1
-1
-1
-1
-1
-1
-1
-1
-1
-1
-
4 ru
ng s
pan
fram
e 1
-1
12
12
23
23
34
34
45
45
56
56
4 ru
ng la
dd
er fr
ame
1-
11
21
22
32
33
43
44
54
55
65
6
1.8m
- 2
.5m
ha
tch
dec
k1
11
12
22
33
33
44
44
55
55
66
66
1.8m
- 2
.5m
ho
rizon
tal b
race
66
66
1010
1014
1414
1418
1818
1822
2222
2226
2626
26
2.1m
- 2
.7m
d
iago
nal b
race
23
35
57
79
911
1113
1315
1517
1719
1921
2123
23
1.8m
- 2
.5m
si
de
toeb
oard
22
22
22
22
22
22
22
22
22
22
22
2
Sin
gle
wid
th
toeb
oard
end
22
22
22
22
22
22
22
22
22
22
22
2
Sta
ndar
d s
tab
ilise
r-
-4
44
44
--
--
--
--
--
--
--
--
Tele
scop
ic s
tab
ilise
r-
--
--
--
44
44
--
--
44
4-
--
--
Larg
e te
lesc
opic
st
abili
ser
--
--
--
--
--
-4
44
4-
--
44
44
4
Component Schedule based on 3T specification
Aluminium toeboard sets available
Hilyte 500
91www.lyteladders.co.uk Sales Tel: 01792 796666
Inte
rnal
or
exte
rnal
wor
k (m
)In
tern
al w
ork
only
(m)
Dou
ble
Wid
th -
P
latf
orm
Hei
ghts
1.2
1.7
2.2
2.7
3.2
3.7
4.2
4.7
5.2
5.7
6.2
6.7
7.2
7.7
8.2
8.7
9.2
9.7
10.2
10.7
11.2
11.7
12.2
150m
m d
ual l
ocki
ng
cast
or4
44
44
44
44
44
44
44
44
44
44
44
Ad
just
able
leg
44
44
44
44
44
44
44
44
44
44
44
4
2 ru
ng s
pan
fram
e-
11
--
11
--
11
--
11
--
11
--
11
2 ru
ng la
dd
er fr
ame
-1
1-
-1
1-
-1
1-
-1
1-
-1
1-
-1
1
3 ru
ng s
pan
fram
e-
1-
1-
1-
1-
1-
1-
1-
1-
1-
1-
1-
3 ru
ng la
dd
er fr
ame
-1
-1
-1
-1
-1
-1
-1
-1
-1
-1
-1
-
4 ru
ng s
pan
fram
e 1
-1
12
12
23
23
34
34
45
45
56
56
4 ru
ng la
dd
er fr
ame
1-
11
21
22
32
33
43
44
54
55
65
6
1.8m
- 2
.5m
ha
tch
dec
k1
11
12
22
33
33
44
44
55
55
66
66
1.8m
- 2
.5m
S
tand
ard
dec
k1
11
11
11
11
11
11
11
11
11
11
11
1.8m
- 2
.5m
ho
rizon
tal b
race
66
66
1010
1014
1414
1418
1818
1822
2222
2226
2626
26
2.1m
- 2
.7m
d
iago
nal b
race
23
35
57
79
911
1113
1315
1517
1719
1921
2123
23
1.8m
- 2
.5m
si
de
toeb
oard
22
22
22
22
22
22
22
22
22
22
22
2
Dou
ble
wid
th
toeb
oard
end
22
22
22
22
22
22
22
22
22
22
22
2
Sta
ndar
d s
tab
ilise
r-
-4
44
44
44
44
--
--
--
--
--
--
Tele
scop
ic s
tab
ilise
r-
--
--
--
--
--
4-
--
44
4-
--
--
Larg
e te
lesc
opic
st
abili
ser
--
--
--
--
--
--
44
4-
--
44
44
4
Component Schedule based on 3T specification
Aluminium toeboard sets available
Hily
te 5
00 T
ow
er D
ou
ble
Wid
th C
om
po
nen
t S
ched
ule
Hilyte 500
92 email: sales@lyteladders.co.uk
HiLyte 250The new HiLyte Tower has been introduced to our successful Tower and Welded product range, as a result of continuous product research, development and innovation.
The 250mm span frame pitch and double hatchdeck enables users to comply with 3T regulations with ease. The HiLyte Tower affirms our ongoing commitment to the ever-changing world of Health and Safety in the access equipment industry.
The HiLyte Tower can offer you:• 250mm pitch span frame for strength,
stability and ease of use.• New colour coded braces for effortless assembly.• Smooth and ribbed tubing on braces for quick identification.• Double hatchdeck for ease of assembly and safe use.• Choice of toeboards: standard wooden,
or new aluminium folding unit.• Fully complies with latest regulations,
product standards and requirements - including the 3T method of assembly• Dual brake on/off system.• Castings on every rung.• Quick release.• Large, articulated rubber feet
on all stabilisers.• Certified to BSEN1004:2004• 3T compatible
Hilyte 250
Hilyte250
93www.lyteladders.co.uk Sales Tel: 01792 796666
Hily
te 2
50 T
ow
er S
ing
le W
idth
Co
mp
on
ent
Sch
edu
le
Hilyte 250
Component Schedule based on 3T specification
Aluminium toeboard sets available
Inte
rnal
or
exte
rnal
wor
k (m
)In
tern
al w
ork
only
(m)
Sin
gle
Wid
th -
P
latf
orm
Hei
ghts
1.
21.
72.
22.
73.
23.
74.
24.
75.
25.
76.
26.
77.
27.
78.
28.
79.
29.
710
.210
.711
.211
.712
.2
150m
m d
ual l
ocki
ng
cast
or4
44
44
44
44
44
44
44
44
44
44
44
Ad
just
able
leg
44
44
44
44
44
44
44
44
44
44
44
4
4 ru
ng a
cces
s fr
ame
-2
2-
-2
2-
-2
2-
-2
2-
-2
2-
-2
2
6 ru
ng a
cces
s fr
ame
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-
8 ru
ng a
cces
s fr
ame
2-
22
42
44
64
66
86
88
108
1010
1210
12
Hat
ch d
eck
11
12
22
23
33
34
44
45
55
56
66
6
Hor
izon
tal b
race
66
66
1010
1014
1414
1418
1818
1822
2222
2226
2626
26
Dia
gona
l bra
ce2
43
55
77
99
1111
1313
1515
1717
1919
2121
2323
Sid
e to
e b
oard
22
22
22
22
22
22
22
22
22
22
22
2
End
toe
boa
rd2
22
22
22
22
22
22
22
22
22
22
22
Sta
ndar
d s
tab
ilise
r-
-4
44
44
--
--
--
--
--
--
--
--
Tele
scop
ic s
tab
ilise
r-
--
--
--
44
44
--
--
44
4-
--
--
Larg
e te
lesc
opic
st
abili
ser
--
--
--
--
--
-4
44
4-
--
44
44
4
94 email: sales@lyteladders.co.uk
Hily
te 2
50 T
ow
er D
ou
ble
Wid
th C
om
po
nen
t S
ched
ule
Hilyte 250
Component Schedule based on 3T specification
Aluminium toeboard sets available
Inte
rnal
or
exte
rnal
wor
k (m
)In
tern
al w
ork
only
(m)
Dou
ble
Wid
th -
P
latf
orm
Hei
ght
1.2
1.7
2.2
2.7
3.2
3.7
4.2
4.7
5.2
5.7
6.2
6.7
7.2
7.7
8.2
8.7
9.2
9.7
10.2
10.7
11.2
11.7
12.2
150m
m d
ual l
ocki
ng
cast
or4
44
44
44
44
44
44
44
44
44
44
44
Ad
just
able
leg
44
44
44
44
44
44
44
44
44
44
44
4
4 ru
ng a
cces
s fr
ame
-2
2-
-2
2-
-2
2-
-2
2-
-2
2-
-2
2
6 ru
ng a
cces
s fr
ame
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-
8 ru
ng a
cces
s fr
ame
2-
22
42
44
64
66
86
88
108
1010
1210
12
Hat
ch d
eck
11
12
22
23
33
34
44
45
55
56
66
6
Sta
ndar
d d
eck
11
11
11
11
11
11
11
11
11
11
11
1
Hor
izon
tal b
race
66
66
1010
1014
1414
1418
1818
1822
2222
2226
2626
26
Dia
gona
l bra
ce2
43
55
77
99
1111
1313
1515
1717
1919
2121
2323
Sid
e to
e b
oard
22
22
22
22
22
22
22
22
22
22
22
2
End
toe
boa
rd2
22
22
22
22
22
22
22
22
22
22
22
Sta
ndar
d s
tab
ilise
r-
-4
44
44
--
--
--
--
--
--
--
--
Tele
scop
ic s
tab
ilise
r-
--
--
--
44
44
--
--
44
4-
--
--
Larg
e te
lesc
opic
st
abili
ser
--
--
--
--
--
-4
44
4-
--
44
44
4
95www.lyteladders.co.uk Sales Tel: 01792 796666
Stairlyte Tower
• 5 Different Platform Heights• 3 Colour coded brace claws• Wrap around stabiliser clamps• Access through base tower
by using both walk through gates• Tube to tube welded frames• 3T Compatible• Large articulated rubber feet
on all stabilisers• Certified to BSEN:1004 & BS:1139-6• Base plates as standard• Choice of toeboards: standard wooden or aluminium folding unit
2.2m - 1.2m 3.2m - 2.2m 4.2m - 3.2m 5.2m - 4.2m 6.2m - 5.2m
ALU Adjustable Leg Unit 4 4 4 4 4
Base Plates
Swivel Base Plates 4 4 4 4 4
STGF Gate Stair Frame 2 2 2 2 2
STGRF/ALU
1.0m 4 Rung Single Width Frame
1 1 1 1 1
STSF/8/ALU
2.0m 8 Rung Single Width Frame
0 1 2 3 4
HB13R 1.3m Horizontal Brace 6 6 10 10 14
DB16B 1.64m Diagonal Brace 1 2 3 4 5
DBR17B1.7m Base Diagonal
Brace1 1 1 1 1
HD13 1.3m Hatch Deck 1 1 2 2 3
TBL13/ALU/SW
Stairlyte Alloy Toeboard 1 1 1 1 1
TSU Telescopic Stabiliser Unit - 2 2 2 2
TowerStairlyte
96 email: sales@lyteladders.co.uk
Bespoke Access Products
As Lyte is one of the UK’s leading manufacturers of access equipment and produce all of our core products on site in Swansea, we have the advantage of catering for many customers with our bespoke access solutions.
Our Design and Production department have produced various types of access equipment to meet even the most challenging requirements and attention to detail and safety are paramount when designing custom built access equipment...
• The use of CAD Software• Drawings are submitted to customers for approval
prior to manufacture• Site surveys undertaken if required
Our ability to assess customers needs and fit the correct design of access equipment to the job in question, is second to none and has been utilised by numerous customers over our many years in business.
Our team of skilled and qualified experts has a multitude of experience with access solutions for both small and large-scale projects.
We have successfully manufactured ladder and tower access solutions for many industry types such as:
• Aerial & Satellite• Telecommunications• Fire & Rescue services• Road Haulage & Passenger Transport• Rail• Petrochemical• Retail• Universities• Theme & Leisure Parks
In conjunction with some of these industries Lyte has compiled specific training courses and guidance notes to accompany the bespoke access solutions to ensure safe use of the product.
300kg Heavy Duty Sack Truck 98
Standard Sack Truck 98
200kg Heavy Duty Sack Truck 99
Heavy Duty P Handle Sack Truck 99
Aluminium Folding Sack Truck 100
Double Handle Sack Truck 100
Warehouse Platform Trolley 101
Heavy Duty Garden Truck 101
Telescopic Folding Sack Truck 102
Multipurpose Sack Truck - Aluminium 102
Multipurpose Sack Truck - Steel 103
Heavy Duty Multipurpose Sack Truck – Aluminium 103
Heavy Duty Stair Climber Truck 104
Stair Climber Sack Truck 104
Heavy Duty Sack Truck with Folding Toe 105
Sack Trucks
98 email: sales@lyteladders.co.uk
Sack Trucks
300kg Heavy Duty Sack TruckPneumatic wheels ensure it can be used on rough terrain
• Fitted with pneumatic wheels• Steel frame heavy duty sack truck• 300kg max load capacity• 230mm loading plate• Handle grips• Epoxy painted• Yellow finish
Standard Sack TruckSolid wheel 80kg sack truck
• Steel frame solid toe sack truck• 80kg max loading capacity• 170mm loading plate• Solid smooth roll wheels• Lightweight• Painted yellow finish• Steel frame• Handle grips
Model Load Height Width Toe plate depth Weight
LYTST400 300kg 1100mm 520mm 180mm 10kg
Model Load Height Width Toe plate depth Weight
LYTST100 80kg 1080mm 450mm 170mm 7kg
99www.lyteladders.co.uk Sales Tel: 01792 796666
Sack Trucks
200kg Heavy Duty Sack Truck This is a heavy duty sack truck fi tted with pneumatic wheels and suitable for loads of up to 200Kg
• Fitted with pneumatic wheels• Steel frame solid toe sack truck• 200kg max load capacity• 200mm loading plate• Handle grips with hand protectors• Painted red finish
Heavy Duty P Handle Sack Truck Allows for one hand control allowing the other hand to open doorsDurable Industrial Hand Truck with powder coated finish resisting rust and chipping. This is a P handled Sack Truck with the additional angular handle which allows for easier lifting and pushing/pulling. This hand Truck is ideal for industrial applications. The pneumatic wheels on the Hand truck mean it can tackle rough terrain and uneven surfaces.
• Pneumatic Wheels 260mm • Epoxy Painted • Steel Frame • Box Truck • Takes Loads up to 200kg
Model Load Height Width Length Toe plate depth Weight
LYTST200 200kg 1100mm 520mm 425mm 200mm 8kg
Model Load Height Width Length Toe plate depth Weight
LYTST620 200kg 1310mm 550mm 460mm 220mm 10.2kg
100 email: sales@lyteladders.co.uk
Sack Trucks
Aluminium Folding Sack TruckAluminium folding sack truck, lightweight and folds down for easy transportation and storage
• Aluminium lightweight construction• Fixed and folding toe plate• 2 pinch clips for easy body extension• 100kg max load capacity• Heavy duty pneumatic wheels• Compacts to a height of 770mm
Double Handle Sack Truck180kg double handed sack truck with plastic fi tted handles for comfort
• Fixed toe plate• Dual Handle design makes it easier
to push and pull depending on what size and type of load you are carrying
• 2 Plastic covers on back bars for stair sliding
• Extra back plate support of 75mm per side for extra support for the load
• 180kg max load capacity• Heavy duty pneumatic wheels
Model Load Height Width Length Toe Weight
LYT1428AL 100kg 1130mm 440mm 450mm 200mm 7.15kg
Model Load Height Width Length Toe Weight
LYT2502 180kg 1200mm 500mm 520mm 215mm 10.5kg
101www.lyteladders.co.uk Sales Tel: 01792 796666
Sack Trucks
Warehouse Platform TrolleySuitable for a variety of applications
• Solid platform truck• Rubberised deck and bumper strip• Handle folds flat for easy storage• 150kg or 300kg max load capacity
models available
Heavy Duty Garden TruckAvailable in 200kg and 300kg load capacity
• Independent steering axle• 84cm pull / push handle• Towing shackle mounted in handle
for attachment to Quad bikes• 200kg or 300kg max load
capacity models available• Heavy duty plastic liner• Removable shelf
& drop down sides
Model Load Height Width Length Weight
LYTPH150 150kg 735mm 475mm 820mm 8.4kg
LYTPH300 300kg 916mm 616mm 863mm 16kg
Model Load Height Width Length Weight
LYT1840AH 200kg 520mm 550mm 960mm 27kg
LYT1840 300kg 610mm 940mm 1220mm 29kg
102 email: sales@lyteladders.co.uk
Model Load Height Width Length Toe plate depth Weight
LYT1105B 90kg 1080mm 390mm 400mm 240mm 5.3kg
Sack Trucks
Telescopic Folding Sack Truck
• Steel construction• Folds down for storage
and transport• 2 pinch clips for easy extension• Wide folding toe plate• Compact height of 710mm• Heavy duty pneumatic wheels• 100kg max load capacity
MultipurposeSack Truck - AluminiumHeavy duty aluminium sack truck with dual handles and multipurpose function. Switches from mode to mode, quickly and effortlessly
• Aluminium construction• Extendable top handle• Easy to use pull handle to extend body• Folding steel toe plate• Folds down for compact storage
and transportation• 90kg max load capacity
Model Load Height Width Length Toe Weight
LYT1109-A 100kg 1120mm 460mm 800mm 550mm 11kg
103www.lyteladders.co.uk Sales Tel: 01792 796666
Sack Trucks
MultipurposeSack Truck - SteelSimply change the format to suit the task in hand, Pull along handle folds neatly away when in the upright position.
• Solid wheels and 2 castors.• Epxoy painted.• Yellow finish.• Steel frame.• Handle grips.• Loaded vertically or horizontally.• Maximum capacity load 150kg.
Heavy Duty Multipurpose Sack Truck – AluminiumOur heaviest duty aluminium sack truck with dual handles and multipurpose functions. Switches from mode to mode quickly and effortlessly.
• Easy to switch modes with simple pull leaver.• Aluminium construction.• Dual handles can be used in both modes.• Loaded vertically or horizontally.• 2 Pneumatic wheels and 2 castors.• Maximum capacity load 200kg.• Trolley mode dimensions
H: 970mm W: 480mm L: 1190mm
Model Load Height Width Toe plate depth Toe plate depth Weight
LYST520 150kg 1100mm 420mm 200mm 240mm 11kg
Model Load Height Width Toe plate depth Toe Weight
LYT1864 200kg 1330mm 480mm 190mm 550mm 20.6kg
104 email: sales@lyteladders.co.uk
Sack Trucks
Heavy Duty Stair Climber TruckDurable heavy duty industrial stair climbing sack truck with folding toe plate
• Heavy Duty Stair Climber Sack Truck• This sack trucks makes light work of
moving heavy objects up stairs, steps and kerbs when compared with a conventional sack truck
• It has a rolling 3 wheel assembly enabling the truck to climb stairs, up or down
• Rolls up or down smoothly with 3 linked wheels on either side of the truck
Stair Climber Sack TruckDurable medium duty stair climbing sack truck, 150kg
• This is the lighter version of out Heavy Duty Stair Climber Sack Truck. Maximum capacity load 150kg
• Stair climber Sack Trucks have a 3 wheel arrangement, and makes lighter work of moving heavy objects up stairs, steps and kerbs due to its rotating assembly
• Rolls up or down smoothly with 3 linked wheels on either side of the truck
• Heavy duty version available
Model Load Height Width Toe plate depth Toe plate depth Weight
LYTST800 250kg 1260mm 500mm 160mm 240mm 18kg
Model Load Height Width Length Toe plate depth Weight
LYTST700 150kg 1170mm 515mm 445mm 230mm 19.45kg
105www.lyteladders.co.uk Sales Tel: 01792 796666
Sack Trucks
Heavy Duty Sack Truck with Folding Toe250kg extendable heavy duty sack truck with both a folding and fi xed toe plate
• Steel construction• Fixed and folding toe plate• Fixed toe useful for smaller
objects or quick use• Folding toe can be used for larger
surface ideal for larger items• 250kg max load capacity• Heavy duty pneumatic wheels
Model Load Height Width Length Toe plate depth Weight
LYTST380 250kg 1249mm 650mm 578mm 325mm 15.5kg
106 email: sales@lyteladders.co.uk
The Work at Height Regulations 2005, require that the assembly, dismantling or alteration of Mobile Access Towers should only be undertaken by a competent person, or if being trained, under the supervision of a competent person.
A competent person is a person who can demonstrate that they have suffi cient professional or technical training, knowledge, actual experience, and authority* to enable them to:
a. carry out their assigned duties at the level of responsibility allocated to them;
b. understand any potential hazards related to the work (or equipment) under consideration;
c. detect any technical defects or omissions in that work (or equipment), recognise any implications for health and safety caused by those defects or omissions, and be able to specify a remedial action to mitigate those implications.
*Note: “authority” here means delegated authority to the individual by his employer to carry out a certain function or duty.
Going onto or assembling a mobile access tower will involve working at height. The Advisory Committee on Work at Height Training (ACWAHT) indicate that for anyone who works at height, the above defi nition of a competent person implies:
• To know and understand the specifi c legal duties under the Work at Height Regulations which apply to them as an individual
• To understand who controls their activity and the lines of communication to use
• To understand the principles of fall protection that the Regulations require to be used
• To be able to recognise safe and unsafe situations / activities
• To understand how to deal with the hazards associated with the task allocated to them
• To have adequate training in the correct use and limitations of any work equipment allocated to them for the task
• To understand the need for and the ability to check the adequacy of the safety equipment allocated to them
• If that equipment has been issued to them on a personal basis, an understanding of the correct procedure for storage, maintenance and inspection
• To understand safe procedures of work and state the correct procedure for the task, the emergency (including rescue) procedures in place for the work and their role in it
• To know the procedure for reporting any defects, hazards or unsafe procedures they detect
• PASMA therefore sponsors training courses provided only by authorised training members.
PASMA Professional Training
107www.lyteladders.co.uk Sales Tel: 01792 796666
Ladders & Step Ladders Training Course
* Produced in Association with TLA
* Nationally Recognised
Course contents:
• Working at Height Regulations.(WAHR)
• Risk assessments for ladders and step ladders.
• Inspection of ladders and step ladders.
• Selection of correct type of ladder/stepladder.
• Safe use of ladders and step ladders.
On completion of the course each delegate will be issued with a BLMA Certifi cate and a Training Scheme Photo Identifi cation Card.
For further information contact Lyte Industries Training Centre
Tel: 01792 796666 e-mail: training@lyteladders.co.uk
Ladder Training
108 email: sales@lyteladders.co.uk
1. Acceptance and Cancellation(1) No order for Seller’s goods (whether pursuant to a quotation by Seller or otherwise) is binding on Seller until acknowledged in writing by Seller.
(2) Each order is subject to other Conditions of Sale to which Buyer shall be deemed to assent.
(3) No order shall be subject to other conditions or to modifi cations of these Conditions unless Seller agrees thereto in writing and Seller shall not be deemed to accept such other conditions nor to waive any of these Conditions by failing to object to provisions contained in any purchase order or other communication from Buyer.
2. Seller’s Specifi cations Prices and Charges(1) All descriptions, specifi cations, drawings and particulars of weights and dimensions submitted by Seller are to be deemed approximate only, and descriptions and illustrations in Seller’s catalogues, price lists and other advertising matter shall not form any part of contract.
(2) Until an order has become binding on Seller all prices are subject to change without prior notice.
(3) After an order has become binding on Seller all prices are subject to variations from time to time in list prices and any variations in costs (including without limitation, costs of materials, labour, transport and any tax, fee or charge imposed by any government or other authority) prior to delivery.
3. Payment(1) Unless otherwise agreed by the Seller, or stated in acknowledgement of order, net invoice amount shall become due for payment 30 days from date of invoice.
(2) Seller reserves the right at any time to demand full or partial payment before proceeding or proceeding further with an order.
(3) If Buyer defaults in payment Seller may, in addition to exercising right contained in Condition 3(2), delay delivery or cancel contract , also cancel other orders received from Buyer and charge interest on any overdue payment at a rate of 2% per month.
4. Delivery of Goods(1) Property in goods shall not pass to the Buyer until the Buyer has paid to the Seller the whole price thereof.All risk of loss or damage in transit, shall pass to the Buyer when goods delivered to Buyer. Delivery to a carrier or to any person, fi rm or company on Buyer’s behalf shall constitute delivery to the Buyer. Where goods unascertained, all risk of loss or damage in transit shall pass to Buyer notwithstanding that property in goods may not have been passed to the Buyer on delivery to Buyer.
(2) Where goods sold f.o.b. or c.i.f. all risk of loss or damage in transit shall pass to the Buyer when goods placed on board ship, notwithstanding that the property in goods may not have been passed to the Buyer and Seller shall be under no obligation to give to Buyer notice of specifi ed in section 2(3) of Sale of Goods Act, 1983.
(3) Any time or date specifi ed by Seller as time at which or date on which goods will be delivered given is intended as estimate only and Seller shall not be liable for any loss, damage or expenses whatsoever arising from delay in delivery.
(4) Buyer shall at request of Seller supply Seller with details necessary to allow Seller to make delivery and shall accept delivery whenever Seller proffers delivery. If Buyer does not comply with foregoing it shall indemnify Seller against any consequent loss, damage or expense and Seller may cancel intended delivery related, without prejudice to its right to claim damages in respect of such breach of contract.
(5) Seller reserves the right to make delivery by instalments unless otherwise expressly stipulated in contract. Paragraph (6) of this condition shall apply (mutatis mutandis) to each instalment or delivery.
(6) Delivery of goods of a different description not included in contract shall not entitle Buyer to reject goods delivered and Buyer shall treat such delivery as full performance by Seller and of its contractual duty to deliver.
(7) Seller shall be entitled to cancel delivery in whole or in part when it is delayed in or prevented from making delivery by strikes, lockouts, trade disputes or labour troubles or any cause beyond Seller’s control, including, but without limitation, act of God, act of Buyer, embargo or other government Act, regulation or request, fi re, accident, war, riot, delay in transportation, inability to obtain adequate labour, materials or manufacturing facilities. Seller shall not be bound to obtain in market goods with which to replace goods delivery of which has been cancelled as a result of any said events.
5. Notifi cation of Delivery QueryClaims in respect of error in quality, quantity and condition of goods delivered must be made to Seller within 7 days of receipt . Failure to make such notifi cation shall constitute unqualifi ed acceptance of goods and waiver by Buyer of all claims relating to error in quality, quantity and condition of goods delivered. Formal proof of notifi cation will constitute a unique reference number that can be obtained from the seller.
Conditions of Sale
109www.lyteladders.co.uk Sales Tel: 01792 796666
6. Conditions, Warranties and Return of Goods(1) Each of Seller and Buyer shall be regarded as having received no representation made by or on behalf of other of them before contract was entered into, which in anyway induced it to enter into contract, but this shall not apply to any representation made to one party or on behalf of other which was reduced in writing and signed by or on behalf of representor and was in possession of representee prior to making of contract, and in particular, without prejudice to generality of foregoing those recorded in order or acknowledgement of it.
(2) Seller warrants that it has right to sell goods and that goods are free from any liens unknown to Buyer.
(3) Seller undertakes to repair or replace any goods which are shown by Buyer to Seller’s satisfaction to be defective as a result of a defect in materials or workmanship provided:
(i) Buyer within 7 days of receiving goods notifi es Seller of such defect and claims to return goods; and(ii) Seller consents to such return (such consent being, at Seller’s option, conditional on goods being returned carriage prepaid) and furnishes Buyer with re-delivery instructions; and(iii) Seller shall be entitled to make such test or inspection as it thinks fi t before consenting to goods being returned accordingly, Buyer shall preserve intact goods which it claims to return for a period of 90 days after such claim is made. Failure to make such a claim shall constitute unqualifi ed acceptance of goods and waiver by Buyer of all claims relating to defects in materials or workmanship. This undertaking shall not apply where an attempt has been made other than by Seller to remove defect or where Seller is satisfi ed that goods have been improperly used, maintained, stored or serviced.
(4) Where goods are returned by Buyer and accepted as defective by Seller, Seller shall at its option either repair or replace such goods without cost to Buyer or allow Buyer credit therefore, Buyer shall not be entitled to make any claim in respect of such goods for work done thereon, transport costs, loss of profi t on resale or in sale respect of claim, loss, damage or expense whatsoever other than replacement cost thereof, nor shall Buyer be entitled to treat delivery of such defective goods as ground for repudiating contract or for cancelling further deliveries. or cancel contract , also cancel other orders received from Buyer and charge interest on any overdue payment
(5) Subject only to paragraph (1) of this condition, no statement, undertaking, warranty or conditions express or implied, statutory or otherwise, not stated in these Conditions shall apply to contract.
(6) Buyer undertakes to indemnify Seller against all claims relating to goods sold to Buyer by Seller in respect of any loss, damage or expense by any third party, howsoever caused.
(7) In relation to goods not manufactured by the Seller, provisions of this condition shall apply only where Seller is, in its own opinion, entitled to claim from supplier to it the loss, damage or expense made by Buyer from Seller.
7. ExclusionsSave as herein before provided no undertaking, warranty or condition, express or implied, statutory orotherwise, shall apply to contract.
8. Tests and inspectionsUnless otherwise agreed any test or inspection other than or in excess of those required in Buyer’sspecifi cation, shall be conducted at Seller ’s works and Buyer shall pay a reasonable charge therefor.
9. Patents etcIn cases where buyer provides drawings, designs, models or specifi cations, for the purpose of enabling the Seller to provide goods according to Buyer’s design, the Buyer shall indemnify the Seller against all actions, claims, costs, damages or losses arising from any infringement of letters patent, design, trademark or copyright protected by law in respect of such drawings, designs, models or specifi cations or any goods made or supplied by the Seller in compliance therewith.
10. BreachIf Buyer shall default in or commit any breach of any of its obligations to Seller or if any distress or execution shall be levied on any of Buyer’s property or if Buyer shall make or offer to make any arrangement or composition with creditors or commit any act of bankruptcy, or if Buyer is a limited company and any resolution or petition to wind-up its business is presented or passed or a receiver appointed of such company’s undertaking, property or assets or any part thereof, then Seller shall be entitled forthwith to terminate any order from Buyer then subsisting and on written notice of such termination being posted by it to Buyer’s last known address and any and every subsisting order shall be deemed to have been terminated without prejudice to any claim or right which Seller might otherwise make or exercise.
11. Site WorkWhere Seller or subcontractor of Seller is involved in delivery of goods to a site, in site work, and/or permanent fi xing of goods Special Extra Conditions shall apply, copies of which are obtainable on request.
12. Governing LawThese conditions and all quotations, offers and acceptances shall be construed according to English Law.
110 email: sales@lyteladders.co.uk
Ladder and Stepladder DO’S and DON’TS
Ladders
Stepladders
DO make sure you carry out a risk assessmentDO make sure a ladder is the correct piece of equipment for the jobDO make sure you are using the right classifi cation of ladderDO make sure you are wearing the correct footwearDO make sure you are wearing a helmetDO make sure the ladder is safe and in good conditionDO make sure it has two serviceable non-slip fl eet DO make sure the rungs are clean and secureDO make sure it’s on a fi rm and level baseDO make sure the ladder is at the right height for the jobDO make sure it’s at the right angle for the job (70 – 75 degrees)DO make sure you use a fi rm grip and three points of contact
DON’T work near electrical or overhead hazardsDON’T work in poor weather conditionsDON’T present a hazard to traffi c or passers byDON’T overload yourself with tools and materialsDON’T overreach to complete the taskDON’T stand on the top three rungs
Most of the dos and don’ts that apply to ladders also apply to stepladders. In addition:
The above list is for guidance only and is not exhaustive. All these points, and may others, are covered in detail in the Ladder Association’s standard training course.
DO make sure you work facing forwardsDO make sure all tools are secure
DON’T work facing sideways onDON’T stand on the top handrail
✔✔
✔
✔✔✔✔✔✔✔✔
✔
✘✘✘✘✘✘
✘✘
✔
✔
111www.lyteladders.co.uk Sales Tel: 01792 796666
STEP Methodology
Planning aheadThe Ladder Association recommends what it calls the ‘Step Methodology’ as a vital part of working safely.
SiteWhen positioning a ladder, is the ground/resting surface suitably dry, fl at, strong and secure? If not, you must adapt the surface or take other measures to prevent the ladder becoming unstable.
TaskYou should not undertake a task using a ladder or stepladder which will require you to work continuously for more than 30 minutes at a time.
EquipmentLadders are classifi ed according to general conditions and possible frequency of use.
Industrial Ladders: For heavy duty where relatively high frequency and onerous conditions of use, carriage and storage occur. BS2037 Class 1 and BS1129 Class 1 ladders are suitable for industrial applications.
Light Trades Ladders: For medium duty where relatively low frequency and reasonably good conditions of use, carriage and storage occur. BS EN131 ladders are suitable for light trades applications. In addition, the higher rated BS2037 Class 1 and BS1129 Class 1 ladders can also be used for light trades applications.
Domestic Ladders: For light duty only where frequency of use is low and good carriage and storage conditions occur. BS2037 Class 3 and BS1129 Class 3 ladders are suitable for domestic applications. BS2037 Class 3 and BS1129 Class 3 ladders are NOT suitable for any light trades, trade or industrial applications.
PeopleThe Work at Height Regulations state that ‘Every employer shall ensure that no person engages in any activity including organisation, planning and supervision in relation to work at height or work equipment for use in such work until he or she is competent to do so, or, if being trained, is supervised by a competent person.
The Ladder Association’s Code of Practice covers all these points in detail. For more information visit http://ladderassociation.org.uk/public/home.jsp
112 email: sales@lyteladders.co.uk
Safe Use of a Scaffold Tower or Mobile Tower
The Work at Height (2005) RegulationsIf you are using any item of work at height equipment in the workplace including a scaffold tower, either as an employee or as a self-employed person, the work at height regulations apply to you. You must ensure that not only the person building the tower is competent but also those who specify, use and supervise or manage the use of a tower are competent to do so.
A competent person is a person who can demonstrate that they have suffi cient professional or technical training, knowledge, actual experience, and authority* to enable them to:
Carry out their assigned duties at the level of responsibility allocated to them;
Understand any potential hazards related to the work (or equipment) under consideration;
Detect any technical defects or omissions in that work (or equipment), recognise any implications for health and safety caused by those defects or omissions, and be able to specify a remedial action to mitigate those implications.
*Note: “authority” here means delegated authority to the individual by his employer to carry out a certain function or duty.
Basic guidelines
• You must carry out a proper risk assessment before you start work
• You must be competent to build, dismantle, carry out a pre-use inspection on the tower and complete the necessary pre-use inspection record in accordance with the regulations
• The tower components must be inspected at suitable intervals and an appropriate record kept for those inspections
If you are in any doubt about your competence and ability to comply with the regulations, then please ring PASMA on +44 845 230 4041 for further advice.
113www.lyteladders.co.uk Sales Tel: 01792 796666
Don’t risk your own life or the lives of others
Use of a scaffold tower or mobile access tower
• Never work on a platform without guardrails
• Never stand on an unprotected platform when building or dismantling a tower
• ALWAYS follow the manufacturer’s or supplier’s instruction manual
• Ensure that these manuals are available to the operatives erecting and using the tower, and to the person supervising the work
• No manual should mean no tower
Avoid serious injury by choosing your scaffold tower carefullyTower scaffolds come in many different shapes and sizes so how can you be sure that the one you use is safe?
Simple... ensure that you choose an EN1004 tower!
For more information please visit www.pasma.co.uk
114 email: sales@lyteladders.co.uk
Notes
115www.lyteladders.co.uk Sales Tel: 01792 796666
Notes