Part No. GR-F

Part No. GR-FS

The new Micro Matic growler filler/faucet dual-purpose design allows the same shank fitting to either fill growlers or pour pints! No need for a dedicated growler filler. Our filler/faucet fits U.S. tower and wall shanks. It’s constructed from 316 grade stainless steel. The distinctive, attractive design draws attention to “what’s on tap” and enables on-premise sales of beer to go. Attach a branded tap handle to the top threads to identify the product.

Growler Filler/FaucetFill growlers to go. Pour pints at the bar.

Growler FillerThe Micro Matic Growler filler allows for equalizing pressure, and creating clean, complete fills with minimal oxidation. Growlers are a great way to transport keg beer home!

The growler fills a 1 liter bottle within a minute. Simple fill process: connect bottle, begin filling, release carbon-ation, complete filling and shut off beer, allow excess carbonation to escape through vent tube, remove bottle and cap bottle.

Faucet Turn the filler into a faucet for pouring pints by snapping in a spout. The spout is easily inserted into the growler filler opening. It takes just seconds to snap in the spout and pour a pint, and then remove the spout to fill growlers.

DisPense ChoiCe

01

33

5-D

02

13

1. Connect Bottle2. Begin Filling3. Release Carbonation4. Complete Filling And Shut Off Beer5. Allow Excess Carbonation To Escape Through Vent Tube6. Remove Bottle 7. Cap Bottle

Simple fill process:

www.micromatic.com

Part No. DescriptionGR-FS Growler Filler & Spout

GR-F Growler Filler

GR-SPOUT Spout Only