Post on 10-Feb-2022
COMPANY OVERVIEW
Our Products Niles Building Products is the industry leader in manufacturing expanded metal accessories for stucco, plaster, drywall and veneer plaster applications. Our products are used in Portland cement and stucco construction for wall-to-wall ceiling joints, frames, corners and Exterior Insulation Finishing Systems (E.I.F.S.). Their function is to control expansion and contraction while preserving the integrity of surfaces and their fi nished appearance.
Take a look at our products and their descriptions and let us know how we can assist with your needs.
Our Superiority Expanded metal building products are our specialty. This is where our skills, experience and manufacturing competence are concentrated; adding up to quality that you can depend on.
We work with a variety of gauges of hot-dipped galvanized steel and pure zinc alloy. Our expertise in expanded metal accessories, coupled with our commitment to producing world class quality has made us the market leader in our industry.
Our Company At Niles Building Products we are a service oriented company, high on quality and low in overhead. Our distinction and reputation in the wall and ceiling industry is defi ned by the personal attention we give every inquiry and order. Our customers need, want and deserve the best product of the highest quality, priced right and delivered on time. Make Niles Building Products your choice!
“Specialists in Expanded Metal Building Products” “Specialists in Expanded Metal Building Products”
y
y
Security MeshSecurity Mesh
SHEET SIZE 48”x96”AVAILABLE IN STANDARD & FLATTENED
Also Available: 1” Security Mesh Security Mesh Clips
3/4”, 9 GAUGE3/4”, 9 GAUGE
1-1/2”, 9 GAUGE1-1/2”, 9 GAUGE
1-1/2”, 13 GAUGE1-1/2”, 13 GAUGE
1-1/2”, 16 GAUGE1-1/2”, 16 GAUGE
60 LBS/SHEET60 LBS/SHEET
40 LBS/SHEET40 LBS/SHEET
21 LBS/SHEET21 LBS/SHEET
14.75 LBS/SHEET14.75 LBS/SHEET
SIZESIZE WEIGHTWEIGHT
Used to provide a mechanism for movement to accommodate expansion & contraction caused by initial stucco shrinkage and minor thermal movement.
Like the Double “V”, the Double “J” is also used to provide a mechanism for movement to accommodate expansion and contraction caused by initial stucco shrinkage and minor thermal movement. The Double “J” shaped shoulders provide a more secure stucco bond. Comes pre-taped to ensure a clean finish.
Used to effectively terminate plaster edge and/or to separate stucco from all other structural membranes at doors, windows, and other openings; also when plaster/stucco meets dissimilar material. Expanded flange provides excellent stucco embedment at the junctions of the bead and metal lath.Also available with punched grounds upon request.Caution: 66X Casing Beads w/punched grounds should not be used as a substitute for foundation weep screeds in a 3 coat stucco system.
30 PCS./CTN. - 300 FT. PER CTN.
Wider, reinforced flange provides additional rigidity & strength superior to the Niles 1-A thus allowing for easier installation.
NILES NO. 66NNILES NO. 66NLONG FLANGELONG FLANGE PCS./CARTONPCS./CARTON
CTNS. CTNS. PALLETPALLET
300 FT. PER CTN.
3/8”3/8”1/2”1/2”3/4”3/4”7/8”7/8”1”1”1-3/8”1-3/8”1-1/2”1-1/2”
3030303030303030303030303030
4242424242424242424240404040
Niles No. 66N, Long Flange (J-Weep)Niles No. 66N, Long Flange (J-Weep)
3-1/2 Flange
Available in Zinc - Contact Plant for Details
#36 Foundation Sill Screed Also Available - Special Order Only. Minimum Quantities Apply.
Diamond Mesh LathDiamond Mesh Lath
Self-FurredDiamond Mesh LathSelf-FurredDiamond Mesh Lath
Paper Back LathPaper Back Lath
WT./SQ.YD
SHEETSIZE
PCSBUNDLE
BUNDLESPALLET
1.75 27”x 96” 10 502.5 27”x 96” 10 50
1000 SQ YARDS PER PALLET3.4 27”x 96” 10 50
WT./SQ.YD
SHEETSIZE
PCSBUNDLE
BUNDLESPALLET
1.75 27”x 96” 10 252.5 27”x 96” 10 25
500 SQ YARDS PER PALLET3.4 27”x 96” 10 25
500 SQ YARDS PER PALLET* WEIGHT PER SQ.YARD DOES NOT INCLUDE PAPER
WT./SQ.YD
SHEETSIZE
PCSBUNDLE
BUNDLESPALLET
1.75 27”x 96” 10 252.5 27”x 96” 10 253.4 27”x 96” 10 25
Niles’ Diamond Mesh Lath is a versatile metal lath ideal as a plaster base and reinforcement for all types of walls, ceilings and fi reproofi ng of steel beams and columns.
Niles’ Self-Furred Diamond Mesh Lath provides a 1/4” indentation in the metal lath to hold away from the sheating base and reinforce-ment (plaster embedment). Provides more ample keying for scratch coat application.
Niles’Paper-Back Lath is metal lath, fully backed with Type-1, Grade “D”, Style-2 asphalt paper that meets or exceeds federal specifi cations NO. UU-B-790A. Paper is offset 1-1/2” on one end and side.
NOTE: Niles Building Products will not be responsible for pinholes/perforations caused by the dimples penetrating the paper.
Available in Flat & Self-Furring
Z I N C L A T H
500 SQ YARDS PER PALLET
WT./SQ.YD
SHEETSIZE
PCSBUNDLE
BUNDLESPALLET
2.5 27”x 96” 10 253.4 27”x 96” 10 25
Manufactured from #190 special high grade zinc alloy, approximately 99% pure zinc. Provides the ultimate in corrosion resistance for both specialty and conventional stucco applications. Ideal for coastal applications where salt water and moisture are a concern.
Available in Self-Furring and Paper Back.Call Plant for details.
M E T A L L A T H
HOT DIPPED GALVANIZED:
ASTM C645 - Standard specifi cation for non-structural steel framing members
ASTM C653 - Standard specifi cation for steel sheet zinc coated (galvanized) or zinc iron alloy coated (galvanized) by the hot-dip process
ASTM C841 - Standard specifi cation for installation of interior lath and furring
ASTM C847 - Standard specifi cation for metal lath (2.5 & 3.4 only)
ASTM C1047 - Standard specifi cation for gypsum wallboard and gypsum veneer base accessories
ASTM C1063 – Standard specifi cation for installation of lathing and furring for Portland cement based plaster
• All galvanized products produced from G-60 hot-dipped galvanized raw material to meet full compliancy for your application needs.
• Full line of G90 hot-dipped galvanized now available. This fi nish is intended for applications where superior corrosion resistance is required and cost is a consideration. Contact plant for details.
ZINC:
ASTM B69 - Standard specifi cation for fl at rolled zinc. Approximately 99% pure zinc.
NILES BUILDING PRODUCTS RECOMMENDS THE USE OF ZINC ACCESSORIES FOR ALL EXTERIOR APPLICATIONS
PAPER:
Type 1, Grade “D”, Style 2.
Meets or exceeds federal specifi cations No. 44-B-790A
STORAGE:
Per ASTM C1063 - All metal lath and accessories must be protected from the elements during storage and at job sites
S P E C I F I C A T I O N S
Metal Lath & AccessoriesMetal Lath & Accessories
G E N E R A L F A C T S / R E C O M M E N D A T I O N S
All Niles Building Products accessories are fabricated from galvanized steel or 99% pure zinc alloy.
Zinc accessories are ideal for locations where moisture & corrosion are a concern, however Niles Building Products recommends the use of zinc accessories for all exterior applications.
At the foundation plate line or where the bottom of the stucco wall terminates, a foundation weep screed is recommended.
Casing beads, expansion & control joints are chosen to the specified ground of the stucco system based on the number of coats - scratch, brown, & finish.
66x casing bead is attached to assure straight lines & square angles and to separate structural from non-structural elements such as window & door openings.
STORAGE - Per ASTM C1063: All metal lath and accessories must be protected from the elements during storage and at job sites
Zinc AccessoriesZinc Accessories
Foundation Weep Screed Foundation Weep Screed
Casing Beads, Expansion & Control JointsCasing Beads, Expansion & Control Joints
G E N E R A L F A C T S / R E C O M M E N D A T I O N S
Corner beads are recommended for external corners. They provide a means of producing straight vertical or horizontal stucco surfaces that intersect as well as protection from impact damage. Also aid in establishing the thickness of the basecoat cement plaster.
The installation of control joints is recommended for the purpose of controlling the location and amount of cracking that may occur. However, it is not an assurance that no cracking will occur in the stucco or an assurance that cracking will only occur at the control joint locations.
Control joints provide for better quality stucco work, however the type of building, design and system dictate whether control joints are necessary and the number involved.
Inside corner accessories are recommended if the structure of the intersecting wall construction is different, in which case one or both walls should terminate and the joint should have a sealant system or an inside corner expansion joint (Niles Double V Inside Corner).
Corner BeadsCorner Beads
Control JointsControl Joints
Inside Corner AccessoriesInside Corner Accessories
STORAGE - Per ASTM C1063: All metal lath and accessories must be protected from the elements during storage and at job sites
• TEXAS DISTRIBUTION CENTER •609 AVENUE R
GRAND PRAIRIE, TX 75050