Post on 05-Feb-2018
1
CURRICULUM VITAE
PERSONAL DETAILS
Name : Mohd Yazid bin Yahya
Gender : Male
Date of Birth : 15 November 1966
Nationality : Malaysian
Marital Status : Married
Permanent : 15, Jalan Kebangsaan 5, Taman Universiti, 81310 Skudai
Address
: Correspondent : Fakulti Kejuruteraan Mekanikal, Universiti Teknologi Malaysia,
81310 Skudai Address
Tel : (Mobile) :0197445707 (Office):07-5535997 (Fax):07-5566159
E-mail : yazidyahya@utm.my, yazid@mail.fkm.utm.my, yahyayazid@yahoo.co.uk
Website : www.fkm.utm.my/~yazid
ID Staff : 5604 Expertise : Composite Structure and Natural fibre Composites, Impact and
blast loading, Pressure Vessel
ACADEMIC QUALIFICATIONS
Year 2009 : Ph.D. (Composite Structures)
University of Liverpool, UK
Year 1998 : M.Phil. (Composite Structures) Universiti Teknologi Malaysia
Year 1989 : B. Sc. In Mechanical Engineering Universiti Teknologi Malaysia
AWARD AND HONORS RECEIVED
i) Oct 2007 - Highly Commendable paper Award by Japan Impact Committee (JIC) in
Beijing China
picture
2
ii) Oct 2013 - Polymer-Column Foam Core Sandwich panel, INATEX – Head (Bronze
medal)
iii) Oct 2013 - Electrically Conductive Kenaf Fibers (Electro-Kenaf), INATEX – Member
(Silver medal)
iv) 22-23 Oct 2013 - Electrically Conductive Kenaf Fiber (electro-Kenaf), BioMalaysia &
BioEconomy Asia Pacific Conference 2013 at Persada Johor – Member (Silver medal)
v) Feb 2014 - Polymer-Column Foam Core Sandwich panel, MTE – Head (Silver Medal)
vi) Excellent Award, Excellent Service 2013, Universiti Teknologi Malaysia
vii) Oct 2014 – Flexural Test Rig by Using The Natural Source of Energy, INATEX – Head
(Silver medal)
PROFESSIONAL MEMBERSHIP / QUALIFICATIONS / RECOGNITION
2012 – Now : Persatuan Industri Komposit (PIK) , Committee members, Membership no: PIK00027-2012
2014 – Now : SAMPE (Society for the Advancement of Material and Process
Engineering), Members, Membership no: CM016/13
ADMINISTRATIVE EXPERIENCE
Faculty Level
Jan 2009 – Jan 2011 – Akreditasi FKMLab (Committee members)
Aug 2009 – July 2010 – Programme Coordinator (course) and Projek Sarjana Muda (PSM)
Programme UPNM
Feb 2009 – Jan 2011 – Badan Kebajikan Fakulti (Committee member)
Jan 2009 – Now – Academic Advisor
Sept 2010 – Aug 2012 – Innovative Product Develompent FKM
Sept 2013 – now – Manager Short Course (Composite Center)
3
University Level
1st April 2010 – now – Director Center for Composites
July 2013 – University Community Engagement
21 Mac 2012 – Panel penilai proposal New Academic Staff
22 July 2011 – 24 July 2011 – Head of Strategic Planning Center for Composites
21 Nov – 25 Nov 2011– Head of Short Course “Mould making and Wet Lay-up Laminate”
OTHERS EXPERIENCE
NATIONAL COMMITTEE
1st Sept 2011 – 28 Aug 2012 - Committee member of SAMPE (Society for Advancement of
Material and Process Engineer) Malaysia
April 1992 – now – Pegawai PALAPES (Pangkat Mejar)
28 May 2013 – now – Committee member of Persatuan Industri Komposit
6 Aug 2012 – now – Ahli jawatankuasa Penasihat Teknikal (TAC), Jabatan Tenaga Manusia
(JTM), Kementerian Sumber Manusia
INTERNATIONAL APPOINTMENT/COMMITTEE
8 – Nov 2011 – Scientific Committee, CUTSE 2011, 3rd International Conference Curtin
University, Engineering and Science
4 – 6 Dec 2013 - Session Chairman, The1st International Materials, Industrial and
Manufacturing Engineering Conference
4
RESEARCH ACTIVITIES
RESEARCH PROJECT UNDERTAKEN
PROTOTYPE RESEARCH GRANT SCHEME (PRGS FUND)
i. August 2013-July 2015 – Project Leader, Development of An Explosive Proof
Shield Using Lightweight Composite Materials, RM200,000
E-SIENCE RESEARCH GRANT SCHEME
i. June 2014 – May 2016 – Project Member, Development of a Lightweight Smart
Assistive Knee Brace, RJ130000.7909.4S108, RM 206600
ii. Mac 2010-February 2012 – Project Leader, Biomechanical Analysis and Implant
for Total Arthrosplasty of the Shoulder and Elbow Joint, VOT 79397, RM235,100
EXPLORATORY RESEARCH GRANT SCHEME (ERGS FUND)
i. June 2013 – May 2015 – Project Member, Exploring the Potential of Multi-cell
Columns as Crush Boxes for Automotive Applications,
ERGS/1/2013/TK01UTM/02/2, RM130,000
ii. June 2012 – June 2014 – Project Member, Initial Investigation on Fibre Metal
Laminates (FMLs) Composites for Automotive Structure Applications,
ERGS/1/2012/TK01/UTM/02/16, RM50,000
FUNDAMENTAL RESEARCH GRANT SCHEME (FRGS FUND)
i. 1 July 2014 – 30 June 2016 – Project Leader, Fundamental investigation on
damage evolution of natural fiber hybrid composites under blast loads, RM133,000
ii. Dec 2013 – Nov 2016 – Project Member, Fundamental study on impact
characteristics and energy absorption capability of various fiber metal laminate
(FML) thin-walled tubular structures, R.J130000.7824.4F248, RM100,000
iii. April 2012 – Mac 2014 – Project Member, Characterization of Composite Smart
Sandwich Structure With Embedded Piezoelectric Sensors,
R.J130000.7824.4F155, RM46,000
5
iv. April 2012 – Mac 2014 – Project Member, Characterization and Optimization of
Natural Composite Core with Aluminum Facesheets Subjected to Low-Velocity
Transverse Impact, R.J130000.7824.4F131, RM79,600
v. Oct 2010 – Sept 2012 – Project Member, Fundamental investigation of wave
propagation and impact characteristic of thin-walled structures under high strain
rate, VOT 78697
vi. May 2011-April 2012 – Project Member, Crash analysis of medium sized truck
passenger cabin under impact loading and roll over, RM40,000
UTM RESEARCH UNIVERSITY (GUP)
i. April 2014 – Mac 2015 – Project Leader, Innovative Development of Natural Fiber
Composite Against Blast Loading, Q.J130000.2509.06H38, RM71,606.73
ii. Dec 2012 – Dec 2013 – Project Leader, Investigation of Basalt Woven Fabrics for
Military Applications, Q.J130000.2624.07J19, RM40,000
iii. July 2012 – April 2013 – Project Leader, A Novel Approach in the Composite Tiles
of Polyethylene Terephthalate (PET) bottles and Epoxy with Feathers as Natural
Reinforcing Agent, Q.J130000.2624.05J18, RM20,000
iv. April 2011 – July 2012 – Project Leader, The Impact and blast resistance of
composites structures, Q.J130000. 7124.04J74, RM40,000
v. April 2014 – May 2015 – Project Member, Mechanical behavior of natural
fiber/glass composite tubes subjected to flexural, torsional and pressure loadings,
Q.J130000.2524.07H19, RM53,000
vi. April 2014 – May 2015 – Project Member, Flexural strengthening of Glued
Laminated Timber Beams with FRP composites, Q.J130000.2522.09H35,
RM20,00
vii. April 2014 – May 2015 – Project Member, Natural Fibre Reinforced Epoxy
Composite Poles for Marine Yacht Structure, Q.J130000.2509.07H64,
RM41,606.73
viii. April 2014 – May 2015 – Project Member, Fabrication, characterization and
optimization of smart composite beams with asymmetrically embedded shape
memory alloys, Q.J130000.2509.05H47, RM60,000
6
ix. Dec 2012 – Dec 2014 – Project Member, Development of Conducting Polyaniline
Coated Kenaf Bast Fiber, Q.J130000.2544.04H44, RM140,890.00
x. Dec 2012 – Dec 2013 – Project Member, Mechanical characterization and
optimization of stitched foam sandwich composites subjected to static and dynamic
loading, Q.J130000.2624.08J45, RM50,000
xi. April 2011 – Mac 2012 – Project Member, Development of Natural Fibre-Based
Fibre-Metal Laminates, Q.J130000.2624.03J6, RM40,000
xii. May 2011 – April 2012, Project Member, Crashworthiness Investigation of
Longitudinal (Side) Rail in a Passenger Car By Utilizing Composite Materials,
RM40,000
xiii. May 2011, Project Member, Construction of boat structures using natural fibers
reinforced plastics (Bamboo and kenaf), RM40,000
xiv. April 2011 – July 2012 – Project Member, Characteristic and Optimization of the
Composite Dome due to Internal and External Pressure, Q.J130000.2624.03J61
PATENT FILED/DISCLOSURE
i. Mohd Yazid Yahya, Shokrollah Sharifi, Gholam, A Bendi ng Test Appartus (PI 2014703185 )
TEACHING ACTIVITIES
Semester Sem Subject Code Subject Credit
Hour
Total
2014/2015 1 MMJ2143/
MKMM2143
Advanced Mechanics of
Composite Materials
3 10
2014/2015 1 SKMM3931 Makmal III 1 X 3
Session
60
2013/2014 2 SME 4143 Mechanics of
Composites
3 15
2013/2014 1 SKMM 1113 Solid Mechanics I 3 11
2012/2013 2 SME 4143 Mechanics of
Composites
3 11
2012/2013 1 SKMM 1113 Solid Mechanics I 3 73
2011/2012 2 MMJ2143 Advanced Mechanics of
Composite Materials
3 18
7
2011/2012 2 SME 2921 Makmal II 1 52
2011/2012 2 SMU 2113 Sains Kejuruteraan 3 64
2011/2012 1 SME 2113 Solid Mechanics 1 3 52
2011/2012 1 SME 3931 Makmal III 1 30
2010/2011 2 SME 2123 Solid Mechanics II 3 60
2010/2011 2 SMU 2113 Sains Kejuruteraan 3 54
57
2010/2011 1 SME 2113 Solid Mechanics 1 3 62
2010/2011 1 SME 3931 Makmal III 1 51
2009/2010 2 SME 2113 Solid Mechanics 1 3 61
2009/2010 2 SME 2921 Makmal II 1 61
2009/2010 2 SME 3942 Makmal IV 1 60
2009/2010 1 SME 2921 Makmal II 1 50
2009/2010 1 SME 2113 Solid Mechanics 1 3 37
2008/2009 2 SME 1503 Technical Drawing 3 9
SUPERVISION
PhD Student
Year No. Name Status Title Roles of
Supervision
2011 1 Shokrollah
Sharifi Teshnizi
Graduated Characterization and
Optimization of
General Composite
Dome Ends under
Internal Pressure and
Low Velocity Impact
Loading
Main
Supervisor
2 Saiful Izwan Abd
Razak
Graduated Novel Epoxy Resin
Composites
Containing Polyaniline
Coated Short Kenaf
Bast Fibers and
Polyaniline Nanowires
Co-Supervisor
3 Gholamali sharifi Graduated Deflection Analysis of
Stitched Sandwich
Beams With
Functionally Graded
Foam Core
Co-Supervisor
4 Mohd Faisal
Kambali
Ongoing The Blast Resistance
of Composite
Main
Supervisor
8
Structures
2012
5 Thamir Aunal
Deen
Mohammed
Sheet
Ongoing
Mechanical Behavior
Analysis of Composite
Multilayer Hybrid
Natural/Glass Fiber
Tube Under Internal
Pressure
Main
Supervisor
6 Iqbal Mokhtar Ongoing
Compressive Behavior
of Basalt Filament
Wound Composite
Tubes Subjected to
Transverse Impact
Loading
Main
Supervisor
2013 7 Syed Mohd
Saiful Azwan
Syed Hamzah
Ongoing Through-thickness
Polymer Reinforced
Foam Core Sandwich
Panel
Main
Supervisor
8 Muhamad
Shahirul Mat
Jusoh
Ongoing Blast Resistance of
Natural Fiber Based
Hybrid Composites
Main
Supervisor
9 Syarifah
Syahirah Said
Saleh
Ongoing Pressure Analysis for
Internal Flow Using
LES Model
Co-Supervisor
10 Noor Fadzliana
Ahmad Sharif
Ongoing Preparation and
characterization of
cassava leaves as
food pacaging material
Co-Supervisor
2014 11 Amin Bassirinia Ongoing High strain rate of the
novel FML
Main
Supervisor
12 Sharoul Jambari Ongoing Design, Fabrication
and Evaluation of the
Sandwich Panel with
Light-weight
Honeycomb Core and
Natural Fibers
Composite Skins
Main
Supervisor
9
MSc. Student
Year No. Name Status Title Type Roles of
Supervision
2010 1 Iqbal
Mokhtar
Graduated
Mechanical and in-
vitro analysis of
basalt reinforce
HDPE for upper
extremity joint
application
Reseach Main
Supervisor
2012 2. Nurnaziha
Aris
Ongoing
Whole Feathers as
Reinforcement with
Epoxy Composites
Research Main
Supervisor
3 Armin
Ghanimi
Graduated Flexural Behavior of
Sandwich Composite
Taught
Course
Main
Supervisor
2013 4 Mohd Haziq
Dzulkifli
Ongoing
Characterization and
Testing of Semi-
green Polyurethane
Foam
Research Main
Supervisor
5 Arash Izadi
Jajarm
Graduated Behaviour of
composite panel
under quasi static
indentation load
Taught
Course
Main
Supervisor
6 Chong Lip
Gang
Ongoing Biomimetics Design
of Bullet Proof
Composites Shield
Research Co-
Supervisor
7 Amin
Bassirinia
Graduated Energy Absorption of
Conical-Concave Composite
Taught
Course
Main
Supervisor
8 Ismail bin
Mahamad
Hakimi
Ongoing Machineability of
Stacked
CFRP/Aluminum
Using Carbide tools
Research Co-
Supervisor
2014 9 Mohd Izuan
Nizam bin
Yahya
Ongoing Study of Mechanical Properties of Carbon
Black N600 Series
Research Main
Supervisor
10 Izzah Ongoing Conductive
Multidensity
Polyurethanes foam
reinforced with
carbon nanotubes
using palm oil-based
polyol
Research Co-
Supervisor
10
11 Wan Fathin
binti
Nazirruddin
Ongoing Failure Pressure of
Nature Fiber
Composite Cylinder
Taught
Course
Main
Supervisor
POSTGRADUATE EXAMINATION /VIVA
MSc EXTERNAL EXAMINER
1. Noorrul Wahida Abdul Razak, The Tensile Behaviour of Polymer Composite With
Oil Palm Empty Fruit Bunch and Nanoclay Reinforcement, UITM, 2014
MSc INTERNAL EXAMINER
1. Amirhossein Goharian, Development of Polyetheretherketone Hydroxyapatite
for Load Bearing Joint Implants, 2009
2. Lim Chong Hooi, Floating Water Wheel Design & Development for Power Generation,
2013
PUBLICATIONS
JOURNAL
ISI Journal :
Example : 1. B. Abdi, S.Azwan, M.R.Abdullah, Amran Ayob, Yazid Yahya, LiXin, International
Journal of Mechanical Sciences, 88 (2014) 138–144 (IF: 2.168)
2. Nik Nurfatmah Pz Nik Pauzi, Rohah A. Majid, Mohd Haziq Dzulkifli, Mohd Yazid
Yahya, Development of rigid bio-based polyurethane foam reinforced with nanoclay, Composites: Part B, 67 (2014) 521–526 (IF:2.91)
3. Ashrafi, S. A.; Sharif, S.; Farid, A. A.; Yahya, M.Y, Performance evaluation of carbide
tools in drilling CFRP-Al stacks, Journal of Composite Materials, 2014, vol. 48, issue
17, pp. 2071-2084 (IF: 0.936)
4. G. Sharifishourabi, Sh. Sharifi, A. Ayob and M.Y. Yahya, Tensile Test Machine for
Unsymmetrical Materials, Experimental Mechanics, 2014, 54, 689-694 (IF: 1.548)
5. G Sharifishourabi, R Alebrahim, S Sharifi, A Ayob, Z Vrcelj, MY Yahya, Mechanical
properties of potentially-smart carbon/epoxy composites with asymmetrically embedded shape memory wires, Materials & Design, 2014, 59, 486-493 (IF: 2.913)
11
6. Saiful Izwan Abd Razak, Wan Aizan Wan Abdul Rahman and Mohd Yazid Yahya,
Hybrid composites of short acetylated kenaf bast fiber and conducting polyaniline nanowires in epoxy resin, Journal of Composite Materials, 2014, Vol. 48(6) 667–676 (IF:0.936)
7. Mohd Haziq Dzulkifli; Mohd Yazid Yahya; Farhana Shakira Md Akhir; Rohah Abd
Majid, Development of rigid biocomposite polyurethane foam for load bearing application, Jurnal Teknologi (Sciences and Engineering). 2014;68(3):53-56 (Scopus)
8. Sergei Alexandrov, Yusof Mustafa and Yazid Yahya, An Efficient Approach for
Identifying Constitutive Parameters of the Modified Oyane Ductile Fracture Criterion at High Temperature, Mathematical Problems in Engineering, 2013, 2013 (IF:1.383)
9. Iqbal Mokhtar, Mohd Yazid Yahya & Mohammed Rafiq Abdul Kadir, Mechanical
Characterization of Basalt/HDPE Composite under In-Vitro Condition, Polymer-Plastics Technology and Engineering, 52: 1007–1015, 2013 (IF:1.481)
10. Iqbal Mokhtar, Mohd Yazid Yahya, Mohammed Rafiq Abdul Kadir & Mohd Faisal
Kambali , Effect on Mechanical Performance of UHMWPE/HDPE-Blend Reinforced
with Kenaf, Basalt and Hybrid Kenaf/Basalt Fiber, Polymer-Plastics Technology and Engineering, Volume 52, Issue 11, 2013, 1140-1146 (IF:1.481)
11. Saiful Izwan Abd Razak; Wan Aizan Wan Abdul Rahman; Noor Fadzliana Ahmad Sharif; Nadirul Hasraf Mat Nayan; Muhammad Akmal Ahmad Saidi; Mohd Yazid Yahya, Polyaniline-coated kenaf core and i ts effect on the mechanical and electrical
properties of epoxy resin, Composite Interfaces. 2013;20(8):611-622. (IF:0.628)
12. Saiful Izwan Abd Razak; Wan Aizan Wan Abdul Rahman; Mohd Yazid Yahya, Para-
Hydroxybenzene Sulfonic Acid as a Suitable Dopant for the Preparation of Conductive
Epoxy/Polyaniline Nanowires Nanocomposites Blend: Electrical vs Mechanical Properties, Polymer - Plastics Technology and Engineering. 2013;52(12):1266-
1270.(IF:1.481)
13. Saiful Izwan Abd Razak; Wan Aizan Wan Abdul Wahman; Mohd Yazid Yahya, Novel
epoxy resin composites containing polyaniline coated short kenaf bast fibers and polyaniline nanowires: Mechanical and electrical properties, Journal of Polymer Engineering. 2013;33(6):565-577. (IF:0.282)
14. Saiful Izwan Abd Razak; Wan Aizan Wan Abdul Rahman; Shahrir Hashim; Mohd
Yazid Yahya, Enhanced Interfacial Interaction and Electronic Properties of Novel
Conducting Kenaf/Polyaniline Polymer - Plastics Technology and Engineering Biofibers,. 2013;52(1):51-57. (IF:1.481)
15. Saiful Izwan Abd Razaka; Wan Aizan Wan Abdul Rahmana; Noor Fadzliana Ahmad Sharif; Mohd Yazid Yahya, Simultaneous numerical optimization of the mechanical
and electrical properties of polyaniline coated kenaf fiber using response surface methodology: Nanostructured polyaniline on natural fiber, Composite Interfaces. 2012;19(7):411-424. (IF:0.628)
12
16. Razak Saiful Izwan Abd, Rahman Wan Aizan Wan Abdul, Hashim Shahrir, Yahya
Mohd Yazid: In situ surface modification of natural fiber by conducting polyaniline. Composite Interfaces 2012, 19, 365. (IF:0.628)
17. Abd Razak Saiful Izwan, Rahman Wan Aizan Wan Abdul, Yahya Mohd Yazid:
Electrically conductive nanocomposites of epoxy/polyaniline nanowires doped with
formic acid: effect of loading on the conduction and mechanical properties, NANO 2012, 07, 1250039 (IF:1.167)
18. M Y Yahya, W J Cantwell, G N Nurick and G S Langdon, “The blast resistance of a
woven carbon fiber reinforced epoxy composite”, Journal of Composite Materials, SAGE Publications, Volume 45 Issue 7 April 2011 pp. 789 – 801. (IF:0.936)
19. G S Langdon, M Y Yahya, W J Cantwell and G N Nurick,” The response of
honeycomb core sandwich panels, with aluminium and composite face sheets, to blast loading”, Journal of Sandwich Structures and Materials, November 2010 12, pp 733-754 (IF:0.5)
20. M Y Yahya, W J Cantwell, G N Nurick and G S Langdon, “The blast behavior of fiber
reinforced thermoplastic laminates”, Journal of Composite Materials, SAGE Publications, 2008, pp 2275-2297. (IF:0.936)
SCOPUS Journal :
1. Mohd Haziq Dzulkifli; Mohd Yazid Yahya; Rohah A. Majid, Development of rigid bio-
nanocomposite polyurethane foam for load bearing application: Effect of surfactant composition, Jurnal Teknologi. 2015;72(4):99-101. (Scopus)
2. I Mokhtar, MY Yahya, A Kader, A Saman, S Abu Hassan, Energy Absorption of Basalt
Filament Wound Rectangular Tubes: Experimental Study, Applied Mechanics and Materials 711, 201-205 (Scopus)
3. Mohd Haziq Dzulkifli; Mohd Yazid Yahya; Farhana Shakira Md Akhir; Rohah Abd
Majid, Development of rigid biocomposite polyurethane foam for load bearing application, Jurnal Teknologi (Sciences and Engineering). 2014;68(3):53-56 (Scopus)
4. S. Azwan; B. Abdi, Mohd. Yazid Yahya; Amran Ayob, Quasi-static flexural and
indentation behavior of glass fiber reinforced polymer composite sandwich panel, Advanced Materials Research. 2014;845:320-323 (Scopus)
5. S Azwan, B Abdi, MY Yahya, A Ayob, Quasi-Static Flexural and Tensile Behavior of
Glass Fiber Reinforced Polymer, Advanced Materials Research, 2014, 845, 302-305 (Scopus)
13
6. TADMS Almula, MY Yahya, A Ayob, Mechanical Behavior of Functionally Graded
Sandwich Hollow Cylinders under Internal Pressure, Advanced Materials Research, 2014, 845, 360-366 (Scopus)
7. B Abdi, S Azwan, A Ayob, RA Rahman, MY Yahya, Effect of Manufacturing Process
on Free Vibration of Foam-Core Sandwich Plate, Advanced Materials Research, 2014, 845, 899-903 (Scopus)
8. Thamir A. D. M. S. Almula; Sh Sharifi; G. Sharifishourabi; Soheil Gohari; Amran Bin Ayob; Mohd Yazid Yahya, Static analysis of stitched sandwich beams with functionally graded foam core, Applied Mechanics and Materials. 2013;393:381-386.
(Scopus)
9. Sh Sharifi; Thamir A. D. M. S. Almula; Soheil Gohari; G. Sharifishourabi; Yob Saed; Mohd Yazid Yahya, Impact response of laminated composite cylindrical shell: Finite element simulation approach, Applied Mechanics and Materials. 2013;393:387-392.
(Scopus)
10. SIA Razak, WAWA Rahman, S Hashim, MY Yahya ,Polyaniline and their Conductive
Polymer Blends: A Short Review Malaysian Journal of Fundamental and Applied Sciences, 2013, 9 (2) (Scopus)
11. S.S.R. Koloor, Behzad Abdi, M. R. Abdullah, Amran Ayob and Mohd Yazid bin Yahya, Effect of Strain Rate Upsetting Process on Mechanical Behaviour of Epoxy
Polymer, Applied Mechanics and Materials Vols. 229-231, 2012, pp 303-308 (Scopus)
12. Behzad Abdi, S.S.R. Koloor, M. R. Abdullah, Amran Ayob, Mohd Yazid bin Yahya,
Effect of Strain-Rate on Flexural Behavior of Composite Sandwich Panel, Applied Mechanics and Materials Vols. 229-231, 2012, pp 766-770 (Scopus)
13. Behzad Abdi, Yob Saed Bin Ismail, Amran Ayob, M. R. Abdullah, Mohd Yazid bin
Yahya: Multi-objective optimization of filament wound composite pressure vessels
based on weight and matrix cracking/ burst pressure using imperialist competitive algorithm Applied Mechanics and Materials Vol. 234, 2012, pp 34-38 (Scopus)
14. SH. Sharifi Teshnizi, S. S. R.Koloor, G. Sharifishourabi, Amran Bin Ayob and Mohd
Yazid Yahya; Mechanical Behavior of GFRP Laminated Composite Pipe Subjected To
Uniform Radial Patch Load Advanced Materials Research Vols. 488-489, 2012, pp 542-546 (Scopus)
15. Sh.Sharifi Teshnizi, G. Sharifishourabi, Mohd Yazid Yahya, Amran Bin Ayob;
Mechanical Behavior of Composite Plate under Combined Impact and Internal
Pressure, Applied Mechanics and Materials Vols. 229-231, 2012, pp 732-736 (Scopus)
16. Sina Alizadeh Ashrafi, Safian Sharif, Mohd Yazid Yahya, Ali Davoudinejad;
Assessment of Hole Quality and Thrust Force when Drilling CFRP/Al Stack using Carbide Tools, Applied Mechanics and Materials Vol. 234, 2012, pp 28-33 (Scopus)
14
17. SH. Sharifi Teshnizi, S. S. R.Koloor, G. Sharifishourabi3, Amran Bin Ayob and Mohd
Yazid Yahya, “Effect of Ply Thickness on Displacements and Stresses in Laminated
GFRP Cylinder Subjected to Radial Load”, Advanced Materials Research Vols. 488-489, 2012, pp 367-371 (Scopus)
18. Hamid Reza Bakhsheshi Rad, Mohd Hasbullah Idris, Mohammed Rafiq Abdul Kadir , Saeed Farahany, Amir Fereidouni and Mohd Yazid Yahya, “Characterization and
corrosion behavior of biodegradable Mg-Ca and Mg-Ca-Zn implant alloys”, Applied Mechanics and Materials Vols. 121-126, 2012, pp 568-572 (Scopus)
NON INDEXED Journal :
1. Muhamad Nurizad Bin Rosli, Prof. Ir. Dr. Wan Khairuddin Bin Wan Ali & Dr. Mohd
Yazid Bin Yahya, Review of Application of Ceramic in High Temperature
Environment, Journal of Aerospace Engineering & Technology Volume 1, Issue 2,
Sep, 2011, Pages 40-46
H INDEX : 5
PROCEEDINGS/CONFERENCE
1. S. Azwan, M. Y. Yahya, B. Abdi, and A. Ayob, Low-Velocity Impact of Through
Thickness Polymer Column-Foam Core Sandwich Panel, 9th Asian-Australasian
Conference on Composite Materials (ACCM-9) 14 – 17 October 2014 Suzhou, China
2. M.Y. Yahya, W.A. Wan Abdul Rahman and N. Aris, Feather Fibers as Natural
Reinforcement in Composites : A Review, 8th Asian-Australasian Conference on
Composite Materials (ACCM-8) 6 – 8 November 2012 Kuala Lumpur, Malaysia
3. Razak, S. I. A., Rahman, W. A. W. A., Yahya, M. Y. (2013). Formate Ions as the
Charge Destabilizer for Epoxy/Polyaniline Nanocomposites. 4th International
Conference for Young Chemists.
4. Razak, S. I. A., Rahman, W. A. W. A., Hashim, S., Yahya, M. Y. (2012). Polyaniline
and their Conductive Polymer Blend: A Short Review. Regional Annual Fundamental
Science Symposium
5. M Y Yahya, W J Cantwell, G N Nurick and G S Langdon, “The blast bahavior of fiber
reinforced composite materials”, International Conference on Shock & Impact Load
and Structures, Oct 2007, Beijing.
6. M Y Yahya, W J Cantwell, G N Nurick and G S Langdon, “The blast resistance of fibre
reinforced thermoplastic laminates, SAMPE Europe 29th International Conference and
Forum, Feb 2008, Paris
15
7. M Y Yahya, W J Cantwell, G N Nurick and G S Langdon, “The blast response of
thermoplastic and thermosetting based composite plates, UK-MEC2008, April 2008,
London.
8. M Y Yahya, W J Cantwell, G N Nurick and G S Langdon, “The blast resistance of a
carbon fibre reinforced for aerospace application”, SAMPE Europe 3th Technical
Conference, July 2008, Augsburg.
9. M Y Yahya, W J Cantwell, G N Nurick and G S Langdon, “The blast resistance of a
carbon fibre reinforced plastic for aerospace applications”, ACMA 2010, May 12-14,
2010, Marrakech, Morocco.
10. Amran Ayob, Shukur Hassan and Mohd Yazid Yahya,“Strain Analysis of a saddle –
supported GRP vessel”, World Engineering Congress, 1999.
SEMINARS/WORKSHOPS
Courses/Seminars/Workshops Attended
1. Advanced Composites Aircraft Srtuctures Training Courses, Singapore, 23 – 25 July
2012
2. Impact Research Group Worksyop to mark the retirement of Professor Norman Jones, University of Liverpool, 19 Dec 2005
3. Filament Winding Course, McDonnel Douglas Aerospace, St. Louis, Missouri, USA, 13 April 1996 – 18 May 1996.
4. Training on Composite Material, IIUM, 21st – 22nd December 2009.
5. Vacuum Infusion System Training, Wee Tee Tong, Singapore, 13 Sept 2011 Short Courses Delivered
1. Invited Lecturer, Basic Mechanics and Analysis of Composites, ADTEC Taiping, 16 –
18 June 2014
2. Advanced Green Composites, 7 – 20 May 2012, UTM
3. Product Design Methodology on FRPC’ 10, 14 Dec 2010, UTM
4. A three day course on Basic Mechanics and Analysis of Composites, 10-12 August
2009, Kolej Kemahiran Tinggi Melaka.
16
THESIS
i) Mohd Yazid Yahya, The Blast Response of Fibre Reinforced Composites and
Sandwich Structures, Ph.D. Thesis, University of Liverpool, UK (2009)
BOOK CHAPTER
1. M Y Yahya, W J Cantwell, G N Nurick and G S Langdon, The Blast Response of
Sandwich Structures”, Damage and Fracture of Composite Materials and Structures , Advanced Structure materials, Springer, 2012, 17, 189-217.
2. Mohd Yazid Yahya, Wesley J Cantwell, Gerald N Nurick and Genevieve Langdon,
The Blast Response of the Panel Composites (Chapter 10), Advanced in Mechanical
Engineering Part II 2008, Penerbit Universiti Teknologi Malaysia