1

CURRICULUM VITAE

PERSONAL DETAILS

Name : Mohd Yazid bin Yahya

Gender : Male

Date of Birth : 15 November 1966

Nationality : Malaysian

Marital Status : Married

Permanent : 15, Jalan Kebangsaan 5, Taman Universiti, 81310 Skudai

Address

: Correspondent : Fakulti Kejuruteraan Mekanikal, Universiti Teknologi Malaysia,

81310 Skudai Address

Tel : (Mobile) :0197445707 (Office):07-5535997 (Fax):07-5566159

E-mail : yazidyahya@utm.my, yazid@mail.fkm.utm.my, yahyayazid@yahoo.co.uk

Website : www.fkm.utm.my/~yazid

ID Staff : 5604 Expertise : Composite Structure and Natural fibre Composites, Impact and

blast loading, Pressure Vessel

ACADEMIC QUALIFICATIONS

Year 2009 : Ph.D. (Composite Structures)

University of Liverpool, UK

Year 1998 : M.Phil. (Composite Structures) Universiti Teknologi Malaysia

Year 1989 : B. Sc. In Mechanical Engineering Universiti Teknologi Malaysia

AWARD AND HONORS RECEIVED

i) Oct 2007 - Highly Commendable paper Award by Japan Impact Committee (JIC) in

Beijing China

picture

2

ii) Oct 2013 - Polymer-Column Foam Core Sandwich panel, INATEX – Head (Bronze

medal)

iii) Oct 2013 - Electrically Conductive Kenaf Fibers (Electro-Kenaf), INATEX – Member

(Silver medal)

iv) 22-23 Oct 2013 - Electrically Conductive Kenaf Fiber (electro-Kenaf), BioMalaysia &

BioEconomy Asia Pacific Conference 2013 at Persada Johor – Member (Silver medal)

v) Feb 2014 - Polymer-Column Foam Core Sandwich panel, MTE – Head (Silver Medal)

vi) Excellent Award, Excellent Service 2013, Universiti Teknologi Malaysia

vii) Oct 2014 – Flexural Test Rig by Using The Natural Source of Energy, INATEX – Head

(Silver medal)

PROFESSIONAL MEMBERSHIP / QUALIFICATIONS / RECOGNITION

2012 – Now : Persatuan Industri Komposit (PIK) , Committee members, Membership no: PIK00027-2012

2014 – Now : SAMPE (Society for the Advancement of Material and Process

Engineering), Members, Membership no: CM016/13

ADMINISTRATIVE EXPERIENCE

Faculty Level

Jan 2009 – Jan 2011 – Akreditasi FKMLab (Committee members)

Aug 2009 – July 2010 – Programme Coordinator (course) and Projek Sarjana Muda (PSM)

Programme UPNM

Feb 2009 – Jan 2011 – Badan Kebajikan Fakulti (Committee member)

Jan 2009 – Now – Academic Advisor

Sept 2010 – Aug 2012 – Innovative Product Develompent FKM

Sept 2013 – now – Manager Short Course (Composite Center)

3

University Level

1st April 2010 – now – Director Center for Composites

July 2013 – University Community Engagement

21 Mac 2012 – Panel penilai proposal New Academic Staff

22 July 2011 – 24 July 2011 – Head of Strategic Planning Center for Composites

21 Nov – 25 Nov 2011– Head of Short Course “Mould making and Wet Lay-up Laminate”

OTHERS EXPERIENCE

NATIONAL COMMITTEE

1st Sept 2011 – 28 Aug 2012 - Committee member of SAMPE (Society for Advancement of

Material and Process Engineer) Malaysia

April 1992 – now – Pegawai PALAPES (Pangkat Mejar)

28 May 2013 – now – Committee member of Persatuan Industri Komposit

6 Aug 2012 – now – Ahli jawatankuasa Penasihat Teknikal (TAC), Jabatan Tenaga Manusia

(JTM), Kementerian Sumber Manusia

INTERNATIONAL APPOINTMENT/COMMITTEE

8 – Nov 2011 – Scientific Committee, CUTSE 2011, 3rd International Conference Curtin

University, Engineering and Science

4 – 6 Dec 2013 - Session Chairman, The1st International Materials, Industrial and

Manufacturing Engineering Conference

4

RESEARCH ACTIVITIES

RESEARCH PROJECT UNDERTAKEN

PROTOTYPE RESEARCH GRANT SCHEME (PRGS FUND)

i. August 2013-July 2015 – Project Leader, Development of An Explosive Proof

Shield Using Lightweight Composite Materials, RM200,000

E-SIENCE RESEARCH GRANT SCHEME

i. June 2014 – May 2016 – Project Member, Development of a Lightweight Smart

Assistive Knee Brace, RJ130000.7909.4S108, RM 206600

ii. Mac 2010-February 2012 – Project Leader, Biomechanical Analysis and Implant

for Total Arthrosplasty of the Shoulder and Elbow Joint, VOT 79397, RM235,100

EXPLORATORY RESEARCH GRANT SCHEME (ERGS FUND)

i. June 2013 – May 2015 – Project Member, Exploring the Potential of Multi-cell

Columns as Crush Boxes for Automotive Applications,

ERGS/1/2013/TK01UTM/02/2, RM130,000

ii. June 2012 – June 2014 – Project Member, Initial Investigation on Fibre Metal

Laminates (FMLs) Composites for Automotive Structure Applications,

ERGS/1/2012/TK01/UTM/02/16, RM50,000

FUNDAMENTAL RESEARCH GRANT SCHEME (FRGS FUND)

i. 1 July 2014 – 30 June 2016 – Project Leader, Fundamental investigation on

damage evolution of natural fiber hybrid composites under blast loads, RM133,000

ii. Dec 2013 – Nov 2016 – Project Member, Fundamental study on impact

characteristics and energy absorption capability of various fiber metal laminate

(FML) thin-walled tubular structures, R.J130000.7824.4F248, RM100,000

iii. April 2012 – Mac 2014 – Project Member, Characterization of Composite Smart

Sandwich Structure With Embedded Piezoelectric Sensors,

R.J130000.7824.4F155, RM46,000

5

iv. April 2012 – Mac 2014 – Project Member, Characterization and Optimization of

Natural Composite Core with Aluminum Facesheets Subjected to Low-Velocity

Transverse Impact, R.J130000.7824.4F131, RM79,600

v. Oct 2010 – Sept 2012 – Project Member, Fundamental investigation of wave

propagation and impact characteristic of thin-walled structures under high strain

rate, VOT 78697

vi. May 2011-April 2012 – Project Member, Crash analysis of medium sized truck

passenger cabin under impact loading and roll over, RM40,000

UTM RESEARCH UNIVERSITY (GUP)

i. April 2014 – Mac 2015 – Project Leader, Innovative Development of Natural Fiber

Composite Against Blast Loading, Q.J130000.2509.06H38, RM71,606.73

ii. Dec 2012 – Dec 2013 – Project Leader, Investigation of Basalt Woven Fabrics for

Military Applications, Q.J130000.2624.07J19, RM40,000

iii. July 2012 – April 2013 – Project Leader, A Novel Approach in the Composite Tiles

of Polyethylene Terephthalate (PET) bottles and Epoxy with Feathers as Natural

Reinforcing Agent, Q.J130000.2624.05J18, RM20,000

iv. April 2011 – July 2012 – Project Leader, The Impact and blast resistance of

composites structures, Q.J130000. 7124.04J74, RM40,000

v. April 2014 – May 2015 – Project Member, Mechanical behavior of natural

fiber/glass composite tubes subjected to flexural, torsional and pressure loadings,

Q.J130000.2524.07H19, RM53,000

vi. April 2014 – May 2015 – Project Member, Flexural strengthening of Glued

Laminated Timber Beams with FRP composites, Q.J130000.2522.09H35,

RM20,00

vii. April 2014 – May 2015 – Project Member, Natural Fibre Reinforced Epoxy

Composite Poles for Marine Yacht Structure, Q.J130000.2509.07H64,

RM41,606.73

viii. April 2014 – May 2015 – Project Member, Fabrication, characterization and

optimization of smart composite beams with asymmetrically embedded shape

memory alloys, Q.J130000.2509.05H47, RM60,000

6

ix. Dec 2012 – Dec 2014 – Project Member, Development of Conducting Polyaniline

Coated Kenaf Bast Fiber, Q.J130000.2544.04H44, RM140,890.00

x. Dec 2012 – Dec 2013 – Project Member, Mechanical characterization and

optimization of stitched foam sandwich composites subjected to static and dynamic

loading, Q.J130000.2624.08J45, RM50,000

xi. April 2011 – Mac 2012 – Project Member, Development of Natural Fibre-Based

Fibre-Metal Laminates, Q.J130000.2624.03J6, RM40,000

xii. May 2011 – April 2012, Project Member, Crashworthiness Investigation of

Longitudinal (Side) Rail in a Passenger Car By Utilizing Composite Materials,

RM40,000

xiii. May 2011, Project Member, Construction of boat structures using natural fibers

reinforced plastics (Bamboo and kenaf), RM40,000

xiv. April 2011 – July 2012 – Project Member, Characteristic and Optimization of the

Composite Dome due to Internal and External Pressure, Q.J130000.2624.03J61

PATENT FILED/DISCLOSURE

i. Mohd Yazid Yahya, Shokrollah Sharifi, Gholam, A Bendi ng Test Appartus (PI 2014703185 )

TEACHING ACTIVITIES

Semester Sem Subject Code Subject Credit

Hour

Total

2014/2015 1 MMJ2143/

MKMM2143

Advanced Mechanics of

Composite Materials

3 10

2014/2015 1 SKMM3931 Makmal III 1 X 3

Session

60

2013/2014 2 SME 4143 Mechanics of

Composites

3 15

2013/2014 1 SKMM 1113 Solid Mechanics I 3 11

2012/2013 2 SME 4143 Mechanics of

Composites

3 11

2012/2013 1 SKMM 1113 Solid Mechanics I 3 73

2011/2012 2 MMJ2143 Advanced Mechanics of

Composite Materials

3 18

7

2011/2012 2 SME 2921 Makmal II 1 52

2011/2012 2 SMU 2113 Sains Kejuruteraan 3 64

2011/2012 1 SME 2113 Solid Mechanics 1 3 52

2011/2012 1 SME 3931 Makmal III 1 30

2010/2011 2 SME 2123 Solid Mechanics II 3 60

2010/2011 2 SMU 2113 Sains Kejuruteraan 3 54

57

2010/2011 1 SME 2113 Solid Mechanics 1 3 62

2010/2011 1 SME 3931 Makmal III 1 51

2009/2010 2 SME 2113 Solid Mechanics 1 3 61

2009/2010 2 SME 2921 Makmal II 1 61

2009/2010 2 SME 3942 Makmal IV 1 60

2009/2010 1 SME 2921 Makmal II 1 50

2009/2010 1 SME 2113 Solid Mechanics 1 3 37

2008/2009 2 SME 1503 Technical Drawing 3 9

SUPERVISION

PhD Student

Year No. Name Status Title Roles of

Supervision

2011 1 Shokrollah

Sharifi Teshnizi

Graduated Characterization and

Optimization of

General Composite

Dome Ends under

Internal Pressure and

Low Velocity Impact

Loading

Main

Supervisor

2 Saiful Izwan Abd

Razak

Graduated Novel Epoxy Resin

Composites

Containing Polyaniline

Coated Short Kenaf

Bast Fibers and

Polyaniline Nanowires

Co-Supervisor

3 Gholamali sharifi Graduated Deflection Analysis of

Stitched Sandwich

Beams With

Functionally Graded

Foam Core

Co-Supervisor

4 Mohd Faisal

Kambali

Ongoing The Blast Resistance

of Composite

Main

Supervisor

8

Structures

2012

5 Thamir Aunal

Deen

Mohammed

Sheet

Ongoing

Mechanical Behavior

Analysis of Composite

Multilayer Hybrid

Natural/Glass Fiber

Tube Under Internal

Pressure

Main

Supervisor

6 Iqbal Mokhtar Ongoing

Compressive Behavior

of Basalt Filament

Wound Composite

Tubes Subjected to

Transverse Impact

Loading

Main

Supervisor

2013 7 Syed Mohd

Saiful Azwan

Syed Hamzah

Ongoing Through-thickness

Polymer Reinforced

Foam Core Sandwich

Panel

Main

Supervisor

8 Muhamad

Shahirul Mat

Jusoh

Ongoing Blast Resistance of

Natural Fiber Based

Hybrid Composites

Main

Supervisor

9 Syarifah

Syahirah Said

Saleh

Ongoing Pressure Analysis for

Internal Flow Using

LES Model

Co-Supervisor

10 Noor Fadzliana

Ahmad Sharif

Ongoing Preparation and

characterization of

cassava leaves as

food pacaging material

Co-Supervisor

2014 11 Amin Bassirinia Ongoing High strain rate of the

novel FML

Main

Supervisor

12 Sharoul Jambari Ongoing Design, Fabrication

and Evaluation of the

Sandwich Panel with

Light-weight

Honeycomb Core and

Natural Fibers

Composite Skins

Main

Supervisor

9

MSc. Student

Year No. Name Status Title Type Roles of

Supervision

2010 1 Iqbal

Mokhtar

Graduated

Mechanical and in-

vitro analysis of

basalt reinforce

HDPE for upper

extremity joint

application

Reseach Main

Supervisor

2012 2. Nurnaziha

Aris

Ongoing

Whole Feathers as

Reinforcement with

Epoxy Composites

Research Main

Supervisor

3 Armin

Ghanimi

Graduated Flexural Behavior of

Sandwich Composite

Taught

Course

Main

Supervisor

2013 4 Mohd Haziq

Dzulkifli

Ongoing

Characterization and

Testing of Semi-

green Polyurethane

Foam

Research Main

Supervisor

5 Arash Izadi

Jajarm

Graduated Behaviour of

composite panel

under quasi static

indentation load

Taught

Course

Main

Supervisor

6 Chong Lip

Gang

Ongoing Biomimetics Design

of Bullet Proof

Composites Shield

Research Co-

Supervisor

7 Amin

Bassirinia

Graduated Energy Absorption of

Conical-Concave Composite

Taught

Course

Main

Supervisor

8 Ismail bin

Mahamad

Hakimi

Ongoing Machineability of

Stacked

CFRP/Aluminum

Using Carbide tools

Research Co-

Supervisor

2014 9 Mohd Izuan

Nizam bin

Yahya

Ongoing Study of Mechanical Properties of Carbon

Black N600 Series

Research Main

Supervisor

10 Izzah Ongoing Conductive

Multidensity

Polyurethanes foam

reinforced with

carbon nanotubes

using palm oil-based

polyol

Research Co-

Supervisor

10

11 Wan Fathin

binti

Nazirruddin

Ongoing Failure Pressure of

Nature Fiber

Composite Cylinder

Taught

Course

Main

Supervisor

POSTGRADUATE EXAMINATION /VIVA

MSc EXTERNAL EXAMINER

1. Noorrul Wahida Abdul Razak, The Tensile Behaviour of Polymer Composite With

Oil Palm Empty Fruit Bunch and Nanoclay Reinforcement, UITM, 2014

MSc INTERNAL EXAMINER

1. Amirhossein Goharian, Development of Polyetheretherketone Hydroxyapatite

for Load Bearing Joint Implants, 2009

2. Lim Chong Hooi, Floating Water Wheel Design & Development for Power Generation,

2013

PUBLICATIONS

JOURNAL

ISI Journal :

Example : 1. B. Abdi, S.Azwan, M.R.Abdullah, Amran Ayob, Yazid Yahya, LiXin, International

Journal of Mechanical Sciences, 88 (2014) 138–144 (IF: 2.168)

2. Nik Nurfatmah Pz Nik Pauzi, Rohah A. Majid, Mohd Haziq Dzulkifli, Mohd Yazid

Yahya, Development of rigid bio-based polyurethane foam reinforced with nanoclay, Composites: Part B, 67 (2014) 521–526 (IF:2.91)

3. Ashrafi, S. A.; Sharif, S.; Farid, A. A.; Yahya, M.Y, Performance evaluation of carbide

tools in drilling CFRP-Al stacks, Journal of Composite Materials, 2014, vol. 48, issue

17, pp. 2071-2084 (IF: 0.936)

4. G. Sharifishourabi, Sh. Sharifi, A. Ayob and M.Y. Yahya, Tensile Test Machine for

Unsymmetrical Materials, Experimental Mechanics, 2014, 54, 689-694 (IF: 1.548)

5. G Sharifishourabi, R Alebrahim, S Sharifi, A Ayob, Z Vrcelj, MY Yahya, Mechanical

properties of potentially-smart carbon/epoxy composites with asymmetrically embedded shape memory wires, Materials & Design, 2014, 59, 486-493 (IF: 2.913)

11

6. Saiful Izwan Abd Razak, Wan Aizan Wan Abdul Rahman and Mohd Yazid Yahya,

Hybrid composites of short acetylated kenaf bast fiber and conducting polyaniline nanowires in epoxy resin, Journal of Composite Materials, 2014, Vol. 48(6) 667–676 (IF:0.936)

7. Mohd Haziq Dzulkifli; Mohd Yazid Yahya; Farhana Shakira Md Akhir; Rohah Abd

Majid, Development of rigid biocomposite polyurethane foam for load bearing application, Jurnal Teknologi (Sciences and Engineering). 2014;68(3):53-56 (Scopus)

8. Sergei Alexandrov, Yusof Mustafa and Yazid Yahya, An Efficient Approach for

Identifying Constitutive Parameters of the Modified Oyane Ductile Fracture Criterion at High Temperature, Mathematical Problems in Engineering, 2013, 2013 (IF:1.383)

9. Iqbal Mokhtar, Mohd Yazid Yahya & Mohammed Rafiq Abdul Kadir, Mechanical

Characterization of Basalt/HDPE Composite under In-Vitro Condition, Polymer-Plastics Technology and Engineering, 52: 1007–1015, 2013 (IF:1.481)

10. Iqbal Mokhtar, Mohd Yazid Yahya, Mohammed Rafiq Abdul Kadir & Mohd Faisal

Kambali , Effect on Mechanical Performance of UHMWPE/HDPE-Blend Reinforced

with Kenaf, Basalt and Hybrid Kenaf/Basalt Fiber, Polymer-Plastics Technology and Engineering, Volume 52, Issue 11, 2013, 1140-1146 (IF:1.481)

11. Saiful Izwan Abd Razak; Wan Aizan Wan Abdul Rahman; Noor Fadzliana Ahmad Sharif; Nadirul Hasraf Mat Nayan; Muhammad Akmal Ahmad Saidi; Mohd Yazid Yahya, Polyaniline-coated kenaf core and i ts effect on the mechanical and electrical

properties of epoxy resin, Composite Interfaces. 2013;20(8):611-622. (IF:0.628)

12. Saiful Izwan Abd Razak; Wan Aizan Wan Abdul Rahman; Mohd Yazid Yahya, Para-

Hydroxybenzene Sulfonic Acid as a Suitable Dopant for the Preparation of Conductive

Epoxy/Polyaniline Nanowires Nanocomposites Blend: Electrical vs Mechanical Properties, Polymer - Plastics Technology and Engineering. 2013;52(12):1266-

1270.(IF:1.481)

13. Saiful Izwan Abd Razak; Wan Aizan Wan Abdul Wahman; Mohd Yazid Yahya, Novel

epoxy resin composites containing polyaniline coated short kenaf bast fibers and polyaniline nanowires: Mechanical and electrical properties, Journal of Polymer Engineering. 2013;33(6):565-577. (IF:0.282)

14. Saiful Izwan Abd Razak; Wan Aizan Wan Abdul Rahman; Shahrir Hashim; Mohd

Yazid Yahya, Enhanced Interfacial Interaction and Electronic Properties of Novel

Conducting Kenaf/Polyaniline Polymer - Plastics Technology and Engineering Biofibers,. 2013;52(1):51-57. (IF:1.481)

15. Saiful Izwan Abd Razaka; Wan Aizan Wan Abdul Rahmana; Noor Fadzliana Ahmad Sharif; Mohd Yazid Yahya, Simultaneous numerical optimization of the mechanical

and electrical properties of polyaniline coated kenaf fiber using response surface methodology: Nanostructured polyaniline on natural fiber, Composite Interfaces. 2012;19(7):411-424. (IF:0.628)

12

16. Razak Saiful Izwan Abd, Rahman Wan Aizan Wan Abdul, Hashim Shahrir, Yahya

Mohd Yazid: In situ surface modification of natural fiber by conducting polyaniline. Composite Interfaces 2012, 19, 365. (IF:0.628)

17. Abd Razak Saiful Izwan, Rahman Wan Aizan Wan Abdul, Yahya Mohd Yazid:

Electrically conductive nanocomposites of epoxy/polyaniline nanowires doped with

formic acid: effect of loading on the conduction and mechanical properties, NANO 2012, 07, 1250039 (IF:1.167)

18. M Y Yahya, W J Cantwell, G N Nurick and G S Langdon, “The blast resistance of a

woven carbon fiber reinforced epoxy composite”, Journal of Composite Materials, SAGE Publications, Volume 45 Issue 7 April 2011 pp. 789 – 801. (IF:0.936)

19. G S Langdon, M Y Yahya, W J Cantwell and G N Nurick,” The response of

honeycomb core sandwich panels, with aluminium and composite face sheets, to blast loading”, Journal of Sandwich Structures and Materials, November 2010 12, pp 733-754 (IF:0.5)

20. M Y Yahya, W J Cantwell, G N Nurick and G S Langdon, “The blast behavior of fiber

reinforced thermoplastic laminates”, Journal of Composite Materials, SAGE Publications, 2008, pp 2275-2297. (IF:0.936)

SCOPUS Journal :

1. Mohd Haziq Dzulkifli; Mohd Yazid Yahya; Rohah A. Majid, Development of rigid bio-

nanocomposite polyurethane foam for load bearing application: Effect of surfactant composition, Jurnal Teknologi. 2015;72(4):99-101. (Scopus)

2. I Mokhtar, MY Yahya, A Kader, A Saman, S Abu Hassan, Energy Absorption of Basalt

Filament Wound Rectangular Tubes: Experimental Study, Applied Mechanics and Materials 711, 201-205 (Scopus)

3. Mohd Haziq Dzulkifli; Mohd Yazid Yahya; Farhana Shakira Md Akhir; Rohah Abd

Majid, Development of rigid biocomposite polyurethane foam for load bearing application, Jurnal Teknologi (Sciences and Engineering). 2014;68(3):53-56 (Scopus)

4. S. Azwan; B. Abdi, Mohd. Yazid Yahya; Amran Ayob, Quasi-static flexural and

indentation behavior of glass fiber reinforced polymer composite sandwich panel, Advanced Materials Research. 2014;845:320-323 (Scopus)

5. S Azwan, B Abdi, MY Yahya, A Ayob, Quasi-Static Flexural and Tensile Behavior of

Glass Fiber Reinforced Polymer, Advanced Materials Research, 2014, 845, 302-305 (Scopus)

13

6. TADMS Almula, MY Yahya, A Ayob, Mechanical Behavior of Functionally Graded

Sandwich Hollow Cylinders under Internal Pressure, Advanced Materials Research, 2014, 845, 360-366 (Scopus)

7. B Abdi, S Azwan, A Ayob, RA Rahman, MY Yahya, Effect of Manufacturing Process

on Free Vibration of Foam-Core Sandwich Plate, Advanced Materials Research, 2014, 845, 899-903 (Scopus)

8. Thamir A. D. M. S. Almula; Sh Sharifi; G. Sharifishourabi; Soheil Gohari; Amran Bin Ayob; Mohd Yazid Yahya, Static analysis of stitched sandwich beams with functionally graded foam core, Applied Mechanics and Materials. 2013;393:381-386.

(Scopus)

9. Sh Sharifi; Thamir A. D. M. S. Almula; Soheil Gohari; G. Sharifishourabi; Yob Saed; Mohd Yazid Yahya, Impact response of laminated composite cylindrical shell: Finite element simulation approach, Applied Mechanics and Materials. 2013;393:387-392.

(Scopus)

10. SIA Razak, WAWA Rahman, S Hashim, MY Yahya ,Polyaniline and their Conductive

Polymer Blends: A Short Review Malaysian Journal of Fundamental and Applied Sciences, 2013, 9 (2) (Scopus)

11. S.S.R. Koloor, Behzad Abdi, M. R. Abdullah, Amran Ayob and Mohd Yazid bin Yahya, Effect of Strain Rate Upsetting Process on Mechanical Behaviour of Epoxy

Polymer, Applied Mechanics and Materials Vols. 229-231, 2012, pp 303-308 (Scopus)

12. Behzad Abdi, S.S.R. Koloor, M. R. Abdullah, Amran Ayob, Mohd Yazid bin Yahya,

Effect of Strain-Rate on Flexural Behavior of Composite Sandwich Panel, Applied Mechanics and Materials Vols. 229-231, 2012, pp 766-770 (Scopus)

13. Behzad Abdi, Yob Saed Bin Ismail, Amran Ayob, M. R. Abdullah, Mohd Yazid bin

Yahya: Multi-objective optimization of filament wound composite pressure vessels

based on weight and matrix cracking/ burst pressure using imperialist competitive algorithm Applied Mechanics and Materials Vol. 234, 2012, pp 34-38 (Scopus)

14. SH. Sharifi Teshnizi, S. S. R.Koloor, G. Sharifishourabi, Amran Bin Ayob and Mohd

Yazid Yahya; Mechanical Behavior of GFRP Laminated Composite Pipe Subjected To

Uniform Radial Patch Load Advanced Materials Research Vols. 488-489, 2012, pp 542-546 (Scopus)

15. Sh.Sharifi Teshnizi, G. Sharifishourabi, Mohd Yazid Yahya, Amran Bin Ayob;

Mechanical Behavior of Composite Plate under Combined Impact and Internal

Pressure, Applied Mechanics and Materials Vols. 229-231, 2012, pp 732-736 (Scopus)

16. Sina Alizadeh Ashrafi, Safian Sharif, Mohd Yazid Yahya, Ali Davoudinejad;

Assessment of Hole Quality and Thrust Force when Drilling CFRP/Al Stack using Carbide Tools, Applied Mechanics and Materials Vol. 234, 2012, pp 28-33 (Scopus)

14

17. SH. Sharifi Teshnizi, S. S. R.Koloor, G. Sharifishourabi3, Amran Bin Ayob and Mohd

Yazid Yahya, “Effect of Ply Thickness on Displacements and Stresses in Laminated

GFRP Cylinder Subjected to Radial Load”, Advanced Materials Research Vols. 488-489, 2012, pp 367-371 (Scopus)

18. Hamid Reza Bakhsheshi Rad, Mohd Hasbullah Idris, Mohammed Rafiq Abdul Kadir , Saeed Farahany, Amir Fereidouni and Mohd Yazid Yahya, “Characterization and

corrosion behavior of biodegradable Mg-Ca and Mg-Ca-Zn implant alloys”, Applied Mechanics and Materials Vols. 121-126, 2012, pp 568-572 (Scopus)

NON INDEXED Journal :

1. Muhamad Nurizad Bin Rosli, Prof. Ir. Dr. Wan Khairuddin Bin Wan Ali & Dr. Mohd

Yazid Bin Yahya, Review of Application of Ceramic in High Temperature

Environment, Journal of Aerospace Engineering & Technology Volume 1, Issue 2,

Sep, 2011, Pages 40-46

H INDEX : 5

PROCEEDINGS/CONFERENCE

1. S. Azwan, M. Y. Yahya, B. Abdi, and A. Ayob, Low-Velocity Impact of Through

Thickness Polymer Column-Foam Core Sandwich Panel, 9th Asian-Australasian

Conference on Composite Materials (ACCM-9) 14 – 17 October 2014 Suzhou, China

2. M.Y. Yahya, W.A. Wan Abdul Rahman and N. Aris, Feather Fibers as Natural

Reinforcement in Composites : A Review, 8th Asian-Australasian Conference on

Composite Materials (ACCM-8) 6 – 8 November 2012 Kuala Lumpur, Malaysia

3. Razak, S. I. A., Rahman, W. A. W. A., Yahya, M. Y. (2013). Formate Ions as the

Charge Destabilizer for Epoxy/Polyaniline Nanocomposites. 4th International

Conference for Young Chemists.

4. Razak, S. I. A., Rahman, W. A. W. A., Hashim, S., Yahya, M. Y. (2012). Polyaniline

and their Conductive Polymer Blend: A Short Review. Regional Annual Fundamental

Science Symposium

5. M Y Yahya, W J Cantwell, G N Nurick and G S Langdon, “The blast bahavior of fiber

reinforced composite materials”, International Conference on Shock & Impact Load

and Structures, Oct 2007, Beijing.

6. M Y Yahya, W J Cantwell, G N Nurick and G S Langdon, “The blast resistance of fibre

reinforced thermoplastic laminates, SAMPE Europe 29th International Conference and

Forum, Feb 2008, Paris

15

7. M Y Yahya, W J Cantwell, G N Nurick and G S Langdon, “The blast response of

thermoplastic and thermosetting based composite plates, UK-MEC2008, April 2008,

London.

8. M Y Yahya, W J Cantwell, G N Nurick and G S Langdon, “The blast resistance of a

carbon fibre reinforced for aerospace application”, SAMPE Europe 3th Technical

Conference, July 2008, Augsburg.

9. M Y Yahya, W J Cantwell, G N Nurick and G S Langdon, “The blast resistance of a

carbon fibre reinforced plastic for aerospace applications”, ACMA 2010, May 12-14,

2010, Marrakech, Morocco.

10. Amran Ayob, Shukur Hassan and Mohd Yazid Yahya,“Strain Analysis of a saddle –

supported GRP vessel”, World Engineering Congress, 1999.

SEMINARS/WORKSHOPS

Courses/Seminars/Workshops Attended

1. Advanced Composites Aircraft Srtuctures Training Courses, Singapore, 23 – 25 July

2012

2. Impact Research Group Worksyop to mark the retirement of Professor Norman Jones, University of Liverpool, 19 Dec 2005

3. Filament Winding Course, McDonnel Douglas Aerospace, St. Louis, Missouri, USA, 13 April 1996 – 18 May 1996.

4. Training on Composite Material, IIUM, 21st – 22nd December 2009.

5. Vacuum Infusion System Training, Wee Tee Tong, Singapore, 13 Sept 2011 Short Courses Delivered

1. Invited Lecturer, Basic Mechanics and Analysis of Composites, ADTEC Taiping, 16 –

18 June 2014

2. Advanced Green Composites, 7 – 20 May 2012, UTM

3. Product Design Methodology on FRPC’ 10, 14 Dec 2010, UTM

4. A three day course on Basic Mechanics and Analysis of Composites, 10-12 August

2009, Kolej Kemahiran Tinggi Melaka.

16

THESIS

i) Mohd Yazid Yahya, The Blast Response of Fibre Reinforced Composites and

Sandwich Structures, Ph.D. Thesis, University of Liverpool, UK (2009)

BOOK CHAPTER

1. M Y Yahya, W J Cantwell, G N Nurick and G S Langdon, The Blast Response of

Sandwich Structures”, Damage and Fracture of Composite Materials and Structures , Advanced Structure materials, Springer, 2012, 17, 189-217.

2. Mohd Yazid Yahya, Wesley J Cantwell, Gerald N Nurick and Genevieve Langdon,

The Blast Response of the Panel Composites (Chapter 10), Advanced in Mechanical

Engineering Part II 2008, Penerbit Universiti Teknologi Malaysia