Cube Bank 1 2 GROUP 3 GO ENCELIUM EDGE Standalone …€¦ · ENCELIUM EDGE™ Standalone Wireless...

ENCELIUM EDGE™ Standalone Wireless Light Management System Quick system installation and setup guide

www.osram.us/edge

ENCELIUM EDGE™ System setup (default setup shown)

Note: Mobile app screenshots shown may not be the latest versions available.

ENCELIUM EDGE Controller Number: Installed Area:

Place stickerhere

ENCELIUM EDGE Hardware Barcode Logbook

Note: 1. Each ENCELIUM EDGE Controller covers a space of up to approximately ten thousand square feet

and/or up to one hundred nodes.

2. Additional pages can be downloaded from www.osram-americas.com/simpluxinstall

SAVE THESE PAGES FOR FUTURE REFERENCE!

Meeting Room

Download the Free ENCELIUM EDGE Mobile Setup App

Meeting Room

1 SCAN – the device barcodes for an area

2 GROUP – the barcodes for that area

3 GO – to the next area

Place stickerhere

Cube Bank 2

Place stickerhere

Cube Bank 1

Cube Bank 2

Cube Bank 1

Device barcode locator map

EN-SCPPH

-0450-ZB45570

Made in Canada

Works withOSRAMENCELIUM ®

STD RANGE SENSOR

AAAAAAAAAAAAAAAASetup require barcode.

Do not discard.

EN-EC-ZB-SW56330

Made in Canada

FCC ID:H79DFZM-E7210IC ID:4259B-DFZM7210

Max ambient temperature +40 oCFor Plenum Use

AAAAAAAAAAAAAAAAMAC: 00:00:00:00:00:00

yymmdd

POE-IN

Upgradable to OSRAMENCELIUM ® Networked LMS

ENCELIUM EDGE TM

AAAAAAAAAAAAAAAA

EDGE CTRL

AAAAAAAAAAAAAAAA

Made inCanada6NA8

Works withOSRAMENCELIUM® SIMPLUXTM

3 SCENE WS

AAAAAAAAAAAAAAAA

EN-WS-SC3-ZB-WH45574

FCC ID:H79DFZM-E7220IC ID:4259B-DFZM7220

Wallstation - Wireless 3-Scene Control

Install per installation instructions and electrical & building codes.Max ambient temperature +50

AAAAAAAAAAAAAAAAyymmdd

Wireless Sensor

Wireless Control Module(WALC, WADR, WPL)

WirelessWallstation

ENCELIUM EDGE Controller

Connected Lighting Module (CLM) in light fixture

GO to next area

Scan, Group and Go

ENCELIUM EDGE™ System quick installation guide

For installation and technical questions go to www.osram.us/partner-resources

Remove starter kit from the box. Starter kit includes:

— ENCELIUM EDGE Lighting Controller

— ENCELIUM EDGE Controller power supply unit and cable

— Wiring Test Tool (battery included)

Literature enclosed: — Quick System Installation and Setup Guide

— ENCELIUM EDGE Hardware Barcode Logbook

— ENCELIUM EDGE System Installation Guide

— Installation, Wiring & User Manuals

— Connect the ENCELIUM EDGE Controller power supply unit to a NEMA-approved junction box (refer to the installation manual supplied in packaging).

— Connect supplied CAT-5/power cord from the power supply unit to the ENCELIUM EDGE Controller.

— Remove the controller barcode at perforation and affix to Hardware Barcode Logbook supplied with ENCELIUM EDGE controller.

— Connect Control Modules to NEMA- approved junction boxes where applicable (refer to the installation manual supplied in packaging).

— Refer to “Device Barcode Locator Map” on opposite page.

— Locate and remove barcodes on hardware at perforation and affix to Hardware Barcode Logbook supplied with ENCELIUM EDGE controller.

— Using the wiring test tool, confirm wiring is installed properly.

— Install 2-AA batteries (supplied) in each Wireless Sensor.

— Refer to “Device Barcode Locator Map” on opposite page of this document.

— Mount sensors (refer to the installation manual supplied in packaging).

— Install batteries (supplied) in each Wireless Wallstation.

— Refer to “Device Barcode Locator Map” on opposite page of this document.

— Mount wallstations (refer to the installation manual supplied in packaging).

1 2 3Unpack

contents of boxInstall

ENCELIUM EDGE Controller

Install Wireless Control Modules (WALC, WADR, WPL or CLM)

4Install

Wireless Sensors

5Install

Wireless Wallstations

How to log your device barcodes Three easy steps to saving your device codes

1 – Identify area on new page of Hardware Barcode Logbook (i.e., Meeting Room, Conference Room 1, Cube Bank 1, etc.)

2 – Remove barcode from device and affix to Hardware Barcode Logbook supplied with ENCELIUM EDGE Controller.

3 – Stick barcode on appropriate page in the Hardware Barcode Logbook. Save for set up staff and future reference.

1 Identify and record area name

LobbyENCELIUM EDGE Controller Number: Installed Area:

Place stickerhere

3 Stick

2 Remove

Example:

Wireless Area Lighting Control Module

Note: You must first obtain the barcode from the ENCELIUM EDGE Controller and stick it on the inside front cover of the Hardware Barcode Logbook to designate the “space” name. Then, proceed to each area within the space as described above.

TT Wiring Test Tool verifies electrical connection

LMS122R1 11-17

Wiring Test Tool NOT applicable for installation

OSRAM is a registered trademark of OSRAM GmbH. ENCELIUM is a registered trademark. ENCELIUM EDGE is a trademark of OSRAM SYLVANIA Inc. ZigBee is a registered trademark of the ZigBee Alliance. Specifications subject to changewithout notice.

Cube Bank 1 2 GROUP 3 GO ENCELIUM EDGE Standalone …€¦ · ENCELIUM EDGE™ Standalone Wireless...

Documents

Transcript of Cube Bank 1 2 GROUP 3 GO ENCELIUM EDGE Standalone …€¦ · ENCELIUM EDGE™ Standalone Wireless...

SAMPLE Test Data Report yymmdd-rr - Assist CE

Trxlink Standalone Demo

Announces Q4 & FY15 Results (Standalone & Consolidated), Form A (Standalone & Consolidated), Auditors Report (Standalone & Consolidated) & Results Press Release for December 31, 2015

Standalone 8.1 (final)

50789 PPS Encelium 2 - Homesteadistedtechnical.homestead.com/Catalogs/Encelium_Brochure.pdf · ECS puts ultimate control of lighting at a facility ... ECS utilizes a universal interface

POS Android Advertising Display (Standalone) (Standalone... · 1.7.6 File Management ... 1 x POS Android Advertising Display. ... POS Android Advertising Display (Standalone) Hardware

Offline (Standalone) Mode - IN.govOffline (Standalone) Mode Evergreen—Standalone Interface / Offline Interface Courtesy DCPLEvergreen The terms “Offline Interface” and “Standalone

Websence Standalone

Light is the solution ENCELIUM EXTEND Networked Light Management System - Osram · ENCELIUM EXTEND Networked Light Management System –Wireless System Installation Manual . Page

Standalone Application Builder - Cisco · Standalone Application Builder NormallyadesignerbuildsanapplicationinCallStudioandthendeploytoCallServices.CallStudiohas ...

Pcp standalone [autosaved]

Light is the solution ENCELIUM Energy Management System · PDF file2 ENCELIUM® Energy Management System Innovation This fully software configurable system allows individual users

Marketing 2.0 Standalone

ENCELIUM Energy Management System · Features/Benefits ... The ENCELIUM ®Energy Management System ... web application • All ECU’s have two network cards, ...

ZWL (Standalone)

Standalone and Non-Standalone Beam Management for 3GPP NR ... · 1 Standalone and Non-Standalone Beam Management for 3GPP NR at mmWaves Marco Giordani, Student Member, IEEE, Michele

Standalone Labs

Gateway4 cloud standalone

Grid Standalone New

FTC2 Standalone Manual