+44 (0)1273 811011

paxton.support

support@paxton.co.uk

+44 (0)1273 811011

paxton.support

support@paxton.co.uk

+1(800) 672-7298

usapaxton.support

supportUS@paxton-access.com

+49 (0) 251 2080 6900

paxton.gmbh.support

support@paxton-gmbh.de

+27 (0) 272 14276691

paxton.support

support@paxtonaccess.co.za

+33 (0)157 329356

support@paxtonaccess.fr

paxton.support

+31 (0)76 3333 999

paxton.benelux.support

support@paxton-benelux.com

8000 3570 3783

paxton.support

support@paxtonaccess.ae

+1 (864) 751-3501

soporte@paxton-access.com

paxton.soporte

Connecting a Futronic Fin’Lock FS21 to Net2Overview

3rd Party

Ensure any unused wires are safely terminated.

ACU terminal+12V

Red LED

Amber LED

Green LED

Wiegand D0

Wiegand D1

NOT USED

0V

Cable Pinout+12V

D0 Wiegand Out

D1 Wiegand Out

Gnd

-

-

-

-

To set up a Wiegand filter you will need to use the Net2 Server configuration utility. Once completed, set the reader ‘Token data fomat’ in Net2 to ‘Wiegand Custom’.

The Futronic reader is connected via RS232 to a Wiegand output module, which is then wired into the Net2 ACU as below:

The reader requires the ACU to control the LED’s.

To configure the ACU LED setting, open the Net2 server configuration utility and on the ‘General’ tab, check the ‘Display reader LED’s in OEM style’ box.

If the option is not available, please contact Technical support for further advice.

Paxton advise checking for the correct site code with the Wiegand filter to provide a higher level of security. To determine how this may be done see: AN1010 - Configuring custom Wiegand formats < http://paxton.info/990 >

Futronic software does not install correctly using v4.28 due to SQL 2005 / SQL 2008 differences.

The FS21 reader can be used to add users locally at the reader, however this makes keeping track of user IDs difficult. Once users are enrolled, the User ID must be added as the token number for the user in Net2. Futronic reader illuminates and beeps upon finger print presentation, green LED for access granted, red LED for access denied / unknown finger print. Token numbers returned are the user IDs programmed on the reader or in the Futronic software.

1