Post on 22-Jun-2015
Robust and performant sliding SystemConfort 160
Wide configurations
Amazing performances
Robust features
Easy installation
Confort 160
Confort 160System Characteristics Wide range– slide and lift-slide– mono, duo, tri-rail : 1 to 6 sliding vents– straight cut, low threshold, 4-vent– thermal : Basic, I, SI, SHI
Robust System Concealed drainage Easy to manufacture and install
400 kg55 mm 3 x 5,2 m(no ext. reinf.)
Uf 2.09(C160 SHI)
Confort 160Product Performance Outstanding performance– Highest water tightness : 1350 Pa– Air permeability : Class 4 – 600 Pa– Wind resistance : Class C4 – 1600 Pa– 3m without reinforcement
Amazing Uf value : up to2.09 W/m²K with triple glazing
RC2 anti-burglary Mechanical (EN13115)– strength : class 4– operating forces : class 1
Confort 160Fast assembly Similar build-ups for Slide and Lift/slide Straight-cut finishing profiles with matching
end-pieces Fast assembly with snap-in elements Pin or eccenter cleats Standard duo-rail assembly : 3 hours
Logical workshop Modular punch tool system Highly symmetrical system : ease of
machining, modular construction Milling limited to lock case and frame cover
profiles. No milling for wheels and common accessories
Combined alu profiles + thermal add-ons are handled in one cut-operation.
Confort 160Assembly on-site Mounting of vents made easy,
all sealing parts can be snapped in place afterwards
Fully adjustable locking points Solutions for on-site frame
assembly Symmetrical sliding sash can
be glazed from the outside when needed.
Confort 160
Basic I HI SHI
Thermal variants
All values W/m².K
Confort 160
MonorailLarge glazed surfaceVent profile used as transom
DuorailMultipoint lockingWide range of finishings
Configuration variants
3-rail3 vents besidesSame insulation and sealing profiles
Confort 160
Straight cutSmall sightline Faster and easier to manufacture
Configuration variants