Robust and performant sliding SystemConfort 160

Wide configurations

Amazing performances

Robust features

Easy installation

Confort 160

Confort 160System Characteristics Wide range– slide and lift-slide– mono, duo, tri-rail : 1 to 6 sliding vents– straight cut, low threshold, 4-vent– thermal : Basic, I, SI, SHI

Robust System Concealed drainage Easy to manufacture and install

400 kg55 mm 3 x 5,2 m(no ext. reinf.)

Uf 2.09(C160 SHI)

Confort 160Product Performance Outstanding performance– Highest water tightness : 1350 Pa– Air permeability : Class 4 – 600 Pa– Wind resistance : Class C4 – 1600 Pa– 3m without reinforcement

Amazing Uf value : up to2.09 W/m²K with triple glazing

RC2 anti-burglary Mechanical (EN13115)– strength : class 4– operating forces : class 1

Confort 160Fast assembly Similar build-ups for Slide and Lift/slide Straight-cut finishing profiles with matching

end-pieces Fast assembly with snap-in elements Pin or eccenter cleats Standard duo-rail assembly : 3 hours

Logical workshop Modular punch tool system Highly symmetrical system : ease of

machining, modular construction Milling limited to lock case and frame cover

profiles. No milling for wheels and common accessories

Combined alu profiles + thermal add-ons are handled in one cut-operation.

Confort 160Assembly on-site Mounting of vents made easy,

all sealing parts can be snapped in place afterwards

Fully adjustable locking points Solutions for on-site frame

assembly Symmetrical sliding sash can

be glazed from the outside when needed.

Confort 160

Basic I HI SHI

Thermal variants

All values W/m².K

Confort 160

MonorailLarge glazed surfaceVent profile used as transom

DuorailMultipoint lockingWide range of finishings

Configuration variants

3-rail3 vents besidesSame insulation and sealing profiles

Confort 160

Straight cutSmall sightline Faster and easier to manufacture

Configuration variants