CM Compact Medium

Compact enclosures

CM Compact Medium MTS

CM

Compact System EnclosuresStrategie is to replace the AK enclosures ( end of 2006 )

Compact Medium CM

1-doorWidth Height Depth 600/800 800/1000/1200 300 / 400

2-doorWidth Height Depth 1000/1200 1000/1200/1400 300 / 400

CM Compact Medium MTS

CM Compact Medium MTS

CM Compact Medium MTS

CM BENEFITS

• Interior installation significantly more flexibility with TS8 accessories

• Cable entry more space and options

• Mounting plate easier to install

Benefits CM

CM Compact Medium MTS

CM

Infinite possibilities

Interior installation with system accessories• Compact enclosure on the outside, Top enclosure on the inside

(thanks to standard threaded bolts for interior installation via rails)• TS8 accessories can be used

(no double stockkeeping forcustomers who also use TSaccessories)

• Base/plinth of TS8 (all the well-known solutions such as cableclamping in the base/plinth arepossible)

CM Compact Medium MTS

CM

Infinite possibilities

Variants of cable entry• Buy only what’s necessary (choose gland plates from the TS

accesssory range according to your requirements)• Almost infinite combination possibilities• Width 600/800 mm one . . . . . 1000/1200 mm two cut-outs in the base

• Attention !CM gland plates, packs of 1, please note that at least two packs are required for enclosure width 1000 / 1200

CM Compact Medium MTS

CM

Infinite possibilities

Installation of mounting plate

• Insert at the bottom and snap on at the top

• Thus you can use both hands for screwfastening

• Width 1200 mm, can be additionally screw-fastened in the centre

CM Compact Medium MTS

CM

Bayable enclosure

• Door width 7 mm smaller than enclosure (AE 5 / AK 3 mm) – facilitates baying of CM enclosures

Door opening angle 100°when bayed

• Components installed in doors

- enclosure height 800 mm (two hinges) = 300 N

- higher than 800 mm (three hinges) = 400 N

CM Compact Medium MTS

CM Interior installation

Compatible with TS8

CM Compact Medium MTS

Rail systems e.g. partial mounting plate

Compatible with TS8

CM Interior installation

CM Compact Medium MTS

CM Interior installation

CM Compact Medium MTS

CM Cable entry

CM Compact Medium MTS

CM Cable entry

Suitable TS base/plinth

CM Compact Medium MTS

Assembly-friendly

installation of the

mounting plate

The mounting plate is

fastened with just one clip.

CM Installation of mounting plate

CM Compact Medium MTS

CM Accessories

Standard double-bit lock insert can be exchanged

Alternative

Folding lever handlefor- semi-cylinders- lock inserts- lock and push-button inserts

Lock system

CM Compact Medium MTS

Cable clamp rail

• C rail 30/15 to EN 60 715

• Length adjusted to fit CM and TS8 mounting plates

• Including mounting bracket with 3 fastening options, for optimum adjustment to cable entry opening

CM Accessories

CM Compact Medium MTS

CM Accessories

Further accessories in process !

• Door stay

CM Compact Medium MTS

CM Accessories

Further accessories in process !

• Door stay

• 19” frame

CM Compact Medium MTS

CM Accessories

Further accessories in process !

• Door stay

• 19” frame

• Internal door

CM Compact Medium MTS

CM Accessories

Further accessories in process !

• Door stay

• 19” frame

• Internal door

• Swing frame

• Rain canopy (no photo)